API tools faq
paste
Advertisement
Guest User

Untitled

a guest
Aug 19th, 2017
690
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 65.50 KB | None | 0 0
raw download clone embed print report
  1. root@192.168.83.43's password:
  2.  
  3. The programs included with the Debian GNU/Linux system are free software;
  4. the exact distribution terms for each program are described in the
  5. individual files in /usr/share/doc/*/copyright.
  6.  
  7. Debian GNU/Linux comes with ABSOLUTELY NO WARRANTY, to the extent
  8. permitted by applicable law.
  9. Last login: Thu Apr 20 09:09:36 2017
  10. ****************************************
  11. WARNING: TO RESIZE FILESYSTEM RUN:
  12. sudo fs_resize
  13. to remove this message run:
  14. sudo rm /usr/local/bin/fs_resize_warning
  15. ****************************************
  16. root@OrangePizero:~# uname -a
  17. Linux OrangePizero 3.4.39 #2 SMP PREEMPT Fri Apr 14 14:05:55 CST 2017 armv7l GNU/Linux
  18. root@OrangePizero:~# lsusb
  19. Bus 008 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
  20. Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
  21. Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
  22. Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
  23. Bus 004 Device 002: ID 0bda:8152 Realtek Semiconductor Corp.
  24. Bus 004 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
  25. Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
  26. Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
  27. Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
  28. root@OrangePizero:~# history
  29. 1 ifconfig
  30. 2 ifconfig -a
  31. 3 ifconfig wlan1 up
  32. 4 clear
  33. 5 ls
  34. 6 ifconfig
  35. 7 wpa_supplicant -i wlan1 -c /etc/network/wpa_supplication.conf &
  36. 8 dhcpcd wlan1 &
  37. 9 ifcofig
  38. 10 ifconfig
  39. 11 ls
  40. 12 ls
  41. 13 cd /home/orangepi/
  42. 14 ls
  43. 15 cd Desktop/
  44. 16 ls
  45. 17 cd ..
  46. 18 ls
  47. 19 cd Downloads/
  48. 20 ls
  49. 21 cd ..
  50. 22 ls
  51. 23 rm -rf xfce-install.log
  52. 24 ls
  53. 25 clear
  54. 26 ls
  55. 27 dmesg
  56. 28 ifconfig
  57. 29 nano README
  58. 30 clear
  59. 31 ls
  60. 32 nano README
  61. 33 cd ~
  62. 34 ls
  63. 35 cp /home/orangepi/README ./ -rf
  64. 36 ifconfig wlan1 down
  65. 37 ifconfig
  66. 38 ping www.baidu.com
  67. 39 clear
  68. 40 ls
  69. 41 apt-get install usbmount
  70. 42 nano /etc/asound.conf
  71. 43 clera
  72. 44 l;s
  73. 45 clear
  74. 46 ls
  75. 47 nano /etc/udev/rules.d/automount.rules
  76. 48 clera
  77. 49 ls
  78. 50 clera
  79. 51 udevadm control --reload-rules
  80. 52 ifconfig
  81. 53 ifconfig
  82. 54 df -lh
  83. 55 apt-get update
  84. 56 nano /etc/apt/sources.list
  85. 57 apt-get update
  86. 58 ??????????????????????????????????h?l?O
  87. 59 Z?+?? ??2?`???????????̀L??????$`????????s???????????????????????????n?ǿ???v????d+??????????????????????????????????????ϫo???&l?????????l???M?ϯ??{?&???????w???????????????????????????????O??Rs???????w?w?{?@?*???2w???ij?w?v??????????????????????????????"?l???@?H????????~?̤???????????????????????????~??w????????'???????J?H?D&w;?????s`??
  88. 60 v??b????f??????????????????????????n?n߷?/?n?ϟ? f ????ϖ??????????????????????????????????n?f???ɧl??&????????????=??????????????????????????????????????3?n?3E?L(?g??A?????????n????????;???`ȗh??????z?????????????????????????????n??f/?????_j?3??????쁂????l??=?o???~???????s??????=?????????????3?#N??
  89. 61 ls
  90. 62 ls
  91. 63 reboot
  92. 64 ifconfig
  93. 65 clear
  94. 66 ls
  95. 67 vim /etc/hostname
  96. 68 vim /etc/hosts
  97. 69 reboot
  98. 70 ls
  99. 71 cd /lib/
  100. 72 ls
  101. 73 cd ker
  102. 74 ls
  103. 75 cd mod
  104. 76 ls
  105. 77 cd modules
  106. 78 ls
  107. 79 cd 3.4.112/
  108. 80 ls
  109. 81 cd kernel/
  110. 82 ls
  111. 83 cd drivers/
  112. 84 ls
  113. 85 cd video/
  114. 86 ls
  115. 87 cd sunxi/
  116. 88 ls
  117. 89 cd disp2/
  118. 90 ls
  119. 91 cd tv/
  120. 92 ls
  121. 93 vim /etc/modules
  122. 94 reboot
  123. 95 ls
  124. 96 clear
  125. 97 ls
  126. 98 rm r-f *
  127. 99 l
  128. 100 rm te
  129. 101 ls
  130. 102 arecord -f dat -t wav -d 5 -c 1 test.wav
  131. 103 ls
  132. 104 aplay test.wav
  133. 105 ls
  134. 106 rm -rf test.wav
  135. 107 ls
  136. 108 ls
  137. 109 pwd
  138. 110 cd /home/orangepi/
  139. 111 ls
  140. 112 clear
  141. 113 ls
  142. 114 modprobe sunxi-ir
  143. 115 cd /lib/modules
  144. 116 cd 3.4.112/
  145. 117 ls
  146. 118 find * -name "sunxi-ir*"
  147. 119 vim /etc/modules
  148. 120 reboot
  149. 121 lsmod
  150. 122 ifconfig
  151. 123 history
  152. 124 arecord -f dat -t wav -d 5 -c 1 test.wav
  153. 125 ls
  154. 126 ls -lh
  155. 127 rm -rf test.wav
  156. 128 ls
  157. 129 clear
  158. 130 ls
  159. 131 catg
  160. 132 cat /etc/rc.local
  161. 133 install --group=root --owner=root --mode=0644 /root/50-usb-realtek-net.rules /etc/udev/rules.d/
  162. 134 reboot
  163. 135 ifconfig
  164. 136 echo 8 > /proc/sys/kernel/printk
  165. 137 ifconfig
  166. 138 ifconfig
  167. 139 ifconfig
  168. 140 ifconfig
  169. 141 ifconfig
  170. 142 ifconfig
  171. 143 ifconfig
  172. 144 ifconfig
  173. 145 ping www.baidu.com
  174. 146 lsmod
  175. 147 ifconfig
  176. 148 clear
  177. 149 ls
  178. 150 ifcofnig
  179. 151 ifconfig
  180. 152 ifconfig
  181. 153 ifconfig
  182. 154 ifconfig
  183. 155 ifconfig
  184. 156 ping www.baidu.com
  185. 157 ping www.baidu.com
  186. 158 ping www.baidu.com
  187. 159 ping www.baidu.com
  188. 160 ifconfig
  189. 161 /etc/init.d/networking restart
  190. 162 /etc/init.d/networking restart
  191. 163 ifconfig
  192. 164 ifconfig
  193. 165 ifconfig
  194. 166 ifconfig
  195. 167 ifconfig
  196. 168 vim /etc/rc.local
  197. 169 df -lh
  198. 170 apt-get clean
  199. 171 df -lh
  200. 172 vim /etc/network/interfaces
  201. 173 vim /etc/network/interfaces
  202. 174 ls -lh
  203. 175 cd /etc/network
  204. 176 ls
  205. 177 rm -rf interfaces~
  206. 178 ls
  207. 179 vim interfaces
  208. 180 reboot
  209. 181 ifconfig
  210. 182 ifconfig
  211. 183 ifconfig
  212. 184 echo 8 > /proc/sys/kernel/printk
  213. 185 ls
  214. 186 clera
  215. 187 ls
  216. 188 clear
  217. 189 ls
  218. 190 /etc/init.d/networking restart
  219. 191 ifconfig
  220. 192 /etc/init.d/networking restart
  221. 193 ping www.baidu.com
  222. 194 ping www.baidu.com
  223. 195 ifconfig
  224. 196 ping www.baidu.com
  225. 197 /etc/init.d/networking restart
  226. 198 ifconfig
  227. 199 poing www.baidu.com
  228. 200 ping www.baidu.com
  229. 201 clear
  230. 202 ls
  231. 203 nano /etc/network/interfaces
  232. 204 clear
  233. 205 ls
  234. 206 reboot
  235. 207 uname -a
  236. 208 lsusb
  237. 209 history
  238. root@OrangePizero:~# cat /etc/network/interfaces
  239. # interfaces(5) file used by ifup(8) and ifdown(8)
  240. # Include files from /etc/network/interfaces.d:
  241. source-directory /etc/network/interfaces.d
  242.  
  243. #auto lo
  244. #iface lo inet loopback
  245.  
  246. #auto lo eth0
  247. #allow-hotplug eth0
  248. #iface lo inet loopback
  249. #iface eth0 inet dhcp
  250.  
  251. #auto lo eth1
  252. #allow-hotplug eth1
  253. #iface lo inet loopback
  254. #iface eth1 inet dhcp
  255.  
  256. #auto wlan*
  257. #iface wlan* inet dhcp
  258. #wpa-ssid
  259. #wpa-psk
  260. root@OrangePizero:~# ifconfig
  261. eth0 Link encap:Ethernet HWaddr f6:8b:05:de:10:31
  262. inet6 addr: fe80::f48b:5ff:fede:1031/64 Scope:Link
  263. UP BROADCAST MULTICAST MTU:1500 Metric:1
  264. RX packets:0 errors:0 dropped:0 overruns:0 frame:0
  265. TX packets:4 errors:0 dropped:0 overruns:0 carrier:0
  266. collisions:0 txqueuelen:1000
  267. RX bytes:0 (0.0 B) TX bytes:572 (572.0 B)
  268. Interrupt:114
  269.  
  270. eth1 Link encap:Ethernet HWaddr 00:e0:4c:36:06:30
  271. inet addr:192.168.83.43 Bcast:192.168.83.255 Mask:255.255.255.0
  272. inet6 addr: fe80::2e0:4cff:fe36:630/64 Scope:Link
  273. UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
  274. RX packets:329 errors:0 dropped:9 overruns:0 frame:0
  275. TX packets:161 errors:0 dropped:0 overruns:0 carrier:0
  276. collisions:0 txqueuelen:1000
  277. RX bytes:29770 (29.0 KiB) TX bytes:23957 (23.3 KiB)
  278.  
  279. lo Link encap:Local Loopback
  280. inet addr:127.0.0.1 Mask:255.0.0.0
  281. inet6 addr: ::1/128 Scope:Host
  282. UP LOOPBACK RUNNING MTU:16436 Metric:1
  283. RX packets:8 errors:0 dropped:0 overruns:0 frame:0
  284. TX packets:8 errors:0 dropped:0 overruns:0 carrier:0
  285. collisions:0 txqueuelen:0
  286. RX bytes:1104 (1.0 KiB) TX bytes:1104 (1.0 KiB)
  287.  
  288. root@OrangePizero:~# lsmod
  289. Module Size Used by
  290. r8152 49914 0
  291. cdc_ether 3187 0
  292. usbnet 14152 1 cdc_ether
  293. sunxi_ir_rx 9150 0
  294. gpio_sunxi 8265 0
  295. 8189es 996645 0
  296. root@OrangePizero:~# dmesg
  297. [ 0.000000] Booting Linux on physical CPU 0
  298. [ 0.000000] Initializing cgroup subsys cpu
  299. [ 0.000000] Linux version 3.4.39 (root@curry) (gcc version 4.6.3 20120201 (prerelease) (crosstool-NG linaro-1.13.1-2012.02-20120222 - Linaro GCC 2012.02) ) #2 SMP PREEMPT Fri Apr 14 14:05:55 CST 2017
  300. [ 0.000000] CPU: ARMv7 Processor [410fc075] revision 5 (ARMv7), cr=10c5387d
  301. [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
  302. [ 0.000000] Machine: sun8i
  303. [ 0.000000] cma: CMA: reserved 300 MiB at 4d400000
  304. [ 0.000000] Memory policy: ECC disabled, Data cache writealloc
  305. [ 0.000000] On node 0 totalpages: 262144
  306. [ 0.000000] free_area_init_node: node 0, pgdat c09b0e00, node_mem_map c0b88000
  307. [ 0.000000] Normal zone: 1710 pages used for memmap
  308. [ 0.000000] Normal zone: 0 pages reserved
  309. [ 0.000000] Normal zone: 192850 pages, LIFO batch:31
  310. [ 0.000000] HighMem zone: 594 pages used for memmap
  311. [ 0.000000] HighMem zone: 66990 pages, LIFO batch:15
  312. [ 0.000000] script_init enter!
  313. [ 0.000000] script_init exit!
  314. [ 0.000000] PERCPU: Embedded 8 pages/cpu @c149e000 s11264 r8192 d13312 u32768
  315. [ 0.000000] pcpu-alloc: s11264 r8192 d13312 u32768 alloc=8*4096
  316. [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
  317. [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 259840
  318. [ 0.000000] Kernel command line: console=ttyS0,115200 console=tty1 root=/dev/mmcblk0p2 init=/sbin/init rootwait rootfstype=ext4 panic=10 consoleblank=0 enforcing=0 loglevel=7
  319. [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
  320. [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
  321. [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
  322. [ 0.000000] Memory: 1024MB = 1024MB total
  323. [ 0.000000] Memory: 718484k/718484k available, 330092k reserved, 270336K highmem
  324. [ 0.000000] Virtual kernel memory layout:
  325. [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
  326. [ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
  327. [ 0.000000] vmalloc : 0xf0000000 - 0xff000000 ( 240 MB)
  328. [ 0.000000] lowmem : 0xc0000000 - 0xef800000 ( 760 MB)
  329. [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
  330. [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
  331. [ 0.000000] .text : 0xc0008000 - 0xc08e70c8 (9085 kB)
  332. [ 0.000000] .init : 0xc08e8000 - 0xc0939c00 ( 327 kB)
  333. [ 0.000000] .data : 0xc093a000 - 0xc09b3e10 ( 488 kB)
  334. [ 0.000000] .bss : 0xc09b45c4 - 0xc0b878f0 (1869 kB)
  335. [ 0.000000] Preemptible hierarchical RCU implementation.
  336. [ 0.000000] Additional per-CPU info printed with stalls.
  337. [ 0.000000] NR_IRQS:544
  338. [ 0.000000] Architected local timer running at 24.00MHz.
  339. [ 0.000000] Switching to timer-based delay loop
  340. [ 0.000000] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 178956ms
  341. [ 0.000000] Console: colour dummy device 80x30
  342. [ 0.000000] console [tty1] enabled
  343. [ 0.002346] Calibrating delay loop (skipped), value calculated using timer frequency.. 4800.00 BogoMIPS (lpj=24000000)
  344. [ 0.002519] pid_max: default: 32768 minimum: 301
  345. [ 0.003574] Mount-cache hash table entries: 512
  346. [ 0.006137] Initializing cgroup subsys debug
  347. [ 0.006232] Initializing cgroup subsys cpuacct
  348. [ 0.006308] Initializing cgroup subsys freezer
  349. [ 0.006451] CPU: Testing write buffer coherency: ok
  350. [ 0.006612] ftrace: allocating 23921 entries in 71 pages
  351. [ 0.080506] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
  352. [ 0.080603] [sunxi_smp_prepare_cpus] enter
  353. [ 0.080712] Setting up static identity map for 0x4064a748 - 0x4064a7a0
  354. [ 0.083033] CPU1: Booted secondary processor
  355. [ 0.083033] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
  356. [ 0.083200] CPU2: Booted secondary processor
  357. [ 0.083200] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
  358. [ 0.091114] CPU3: Booted secondary processor
  359. [ 0.091114] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
  360. [ 0.091265] Brought up 4 CPUs
  361. [ 0.100044] SMP: Total of 4 processors activated (19200.00 BogoMIPS).
  362. [ 0.101461] devtmpfs: initialized
  363. [ 0.113004] wakeup src cnt is : 2.
  364. [ 0.113070] [exstandby]leave extended_standby_enable_wakeup_src : event 0x800000
  365. [ 0.113101] [exstandby]leave extended_standby_enable_wakeup_src : wakeup_gpio_map 0x0
  366. [ 0.113132] [exstandby]leave extended_standby_enable_wakeup_src : wakeup_gpio_group 0x40
  367. [ 0.113164] [exstandby]leave extended_standby_enable_wakeup_src : event 0x800000
  368. [ 0.113194] [exstandby]leave extended_standby_enable_wakeup_src : wakeup_gpio_map 0x8
  369. [ 0.113224] [exstandby]leave extended_standby_enable_wakeup_src : wakeup_gpio_group 0x40
  370. [ 0.113254] sunxi pm init
  371. [ 0.114260] pinctrl core: initialized pinctrl subsystem
  372. [ 0.140239] NET: Registered protocol family 16
  373. [ 0.143765] DMA: preallocated 2048 KiB pool for atomic coherent allocations
  374. [ 0.143995] script_sysfs_init success
  375. [ 0.144104] sunxi_dump_init success
  376. [ 0.144104] gpiochip_add: registered GPIOs 0 to 383 on device: sunxi-pinctrl
  377. [ 0.144152] sunxi-pinctrl sunxi-pinctrl: initialized sunXi PIO driver
  378. [ 0.146082] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
  379. [ 0.146182] hw-breakpoint: maximum watchpoint size is 8 bytes.
  380. [ 0.146915] [sunxi-module]: [sunxi-module.0] probe success
  381. [ 0.147009] script config pll_video to 297 Mhz
  382. [ 0.147087] script config pll_de to 864 Mhz
  383. [ 0.147194] script config pll_ve to 402 Mhz
  384. [ 0.147268] sunxi_default_clk_init
  385. [ 0.147290] try to set pll6ahb1 to 200000000
  386. [ 0.147338] try to set ahb clk source to pll6ahb1
  387. [ 0.147362] set ahb clk source to pll6ahb1
  388. [ 0.147388] try to set ahb1 to 200000000
  389. [ 0.147418] try to set apb1 to 100000000
  390. [ 0.170699] bio: create slab <bio-0> at 0
  391. [ 0.171180] [ARISC] :sunxi-arisc driver v1.04
  392. [ 0.189729] [ARISC] :arisc version: [v0.1.58.3]
  393. [ 0.276322] [ARISC] :sunxi-arisc driver v1.04 startup succeeded
  394. [ 0.281235] SCSI subsystem initialized
  395. [ 0.281794] usbcore: registered new interface driver usbfs
  396. [ 0.282039] usbcore: registered new interface driver hub
  397. [ 0.282165] usbcore: registered new device driver usb
  398. [ 0.282165] twi_chan_cfg()340 - [twi0] has no twi_regulator.
  399. [ 0.282165] twi_chan_cfg()340 - [twi1] has no twi_regulator.
  400. [ 0.282165] twi_chan_cfg()340 - [twi2] has no twi_regulator.
  401. [ 0.282165] Linux video capture interface: v2.00
  402. [ 0.282640] Advanced Linux Sound Architecture Driver Version 1.0.25.
  403. [ 0.284014] Bluetooth: Core ver 2.16
  404. [ 0.284148] NET: Registered protocol family 31
  405. [ 0.284208] Bluetooth: HCI device and connection manager initialized
  406. [ 0.284280] Bluetooth: HCI socket layer initialized
  407. [ 0.284340] Bluetooth: L2CAP socket layer initialized
  408. [ 0.284462] Bluetooth: SCO socket layer initialized
  409. [ 0.285083] cfg80211: Calling CRDA to update world regulatory domain
  410. [ 0.290879] Switching to clocksource arch_sys_counter
  411. [ 0.341438] FS-Cache: Loaded
  412. [ 0.342064] CacheFiles: Loaded
  413. [ 0.372067] NET: Registered protocol family 2
  414. [ 0.372816] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
  415. [ 0.374420] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
  416. [ 0.379146] TCP bind hash table entries: 65536 (order: 7, 786432 bytes)
  417. [ 0.381561] TCP: Hash tables configured (established 131072 bind 65536)
  418. [ 0.381639] TCP: reno registered
  419. [ 0.381702] UDP hash table entries: 512 (order: 2, 16384 bytes)
  420. [ 0.381834] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
  421. [ 0.382704] NET: Registered protocol family 1
  422. [ 0.383760] RPC: Registered named UNIX socket transport module.
  423. [ 0.383838] RPC: Registered udp transport module.
  424. [ 0.383894] RPC: Registered tcp transport module.
  425. [ 0.383949] RPC: Registered tcp NFSv4.1 backchannel transport module.
  426. [ 0.385233] hw perfevents: enabled with ARMv7 Cortex_A7 PMU driver, 5 counters available
  427. [ 0.385570] sunxi_reg_init enter
  428. [ 0.387470] audit: initializing netlink socket (disabled)
  429. [ 0.387623] type=2000 audit(0.380:1): initialized
  430. [ 0.389994] highmem bounce pool size: 64 pages
  431. [ 0.395230] NTFS driver 2.1.30 [Flags: R/W].
  432. [ 0.395789] fuse init (API version 7.18)
  433. [ 0.396981] msgmni has been set to 1475
  434. [ 0.400743] io scheduler noop registered
  435. [ 0.400814] io scheduler deadline registered
  436. [ 0.401144] io scheduler cfq registered (default)
  437. [ 0.401982] [DISP]disp_module_init
  438. [ 0.402745] DB START bsp init ....
  439. [ 0.402800] cmdline,init_disp=
  440. [ 0.402899] cmdline,disp=
  441. [ 0.403135] DB DISP INIT_TV_PARA
  442. [ 0.413489] [DISP] Fb_map_kernel_logo,line:989:Fb_map_kernel_logo failed!
  443. [ 0.418162] [DISP]disp_module_init finish
  444. [ 0.418718] sw_uart_get_devinfo()1503 - uart0 has no uart_regulator.
  445. [ 0.418807] sw_uart_get_devinfo()1503 - uart1 has no uart_regulator.
  446. [ 0.418887] sw_uart_get_devinfo()1503 - uart2 has no uart_regulator.
  447. [ 0.420139] uart0: ttyS0 at MMIO 0x1c28000 (irq = 32) is a SUNXI
  448. [ 0.420220] sw_uart_pm()890 - uart0 clk is already enable
  449. [ 0.420300] sw_console_setup()1233 - console setup baud 115200 parity n bits 8, flow n
  450. [ 0.520555] console [ttyS0] enabled
  451. [ 1.078421] uart1: ttyS1 at MMIO 0x1c28400 (irq = 33) is a SUNXI
  452. [ 1.137230] uart2: ttyS2 at MMIO 0x1c28800 (irq = 34) is a SUNXI
  453. [ 1.145380] sunxi_cmatest_init enter
  454. [ 1.145478] sunxi_cmatest_init success
  455. [ 1.145936] sunxi_di_init get di_by_pass err!
  456. [ 1.162612] loop: module loaded
  457. [ 1.166224] Get boot type cmd line fail
  458. [ 1.171615] sunxi_spi_chan_cfg()1376 - [spi-0] has no spi_regulator.
  459. [ 1.178772] sunxi_spi_chan_cfg()1376 - [spi-1] has no spi_regulator.
  460. [ 1.187144] spi spi0: master is unqueued, this is deprecated
  461. [ 1.193873] tun: Universal TUN/TAP device driver, 1.6
  462. [ 1.199556] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
  463. [ 1.208681] PPP generic driver version 2.4.2
  464. [ 1.213997] PPP BSD Compression module registered
  465. [ 1.219302] PPP Deflate Compression module registered
  466. [ 1.226853] PPP MPPE Compression module registered
  467. [ 1.232314] NET: Registered protocol family 24
  468. [ 1.237377] PPTP driver version 0.8.5
  469. [ 1.242213] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  470. [ 1.269724] sunxi-ehci sunxi-ehci.1: SW USB2.0 'Enhanced' Host Controller (EHCI) Driver
  471. [ 1.278824] sunxi-ehci sunxi-ehci.1: new USB bus registered, assigned bus number 1
  472. [ 1.288743] sunxi-ehci sunxi-ehci.1: irq 104, io mem 0xf1c1a000
  473. [ 1.310086] sunxi-ehci sunxi-ehci.1: USB 0.0 started, EHCI 1.00
  474. [ 1.318271] hub 1-0:1.0: USB hub found
  475. [ 1.322585] hub 1-0:1.0: 1 port detected
  476. [ 1.348056] sunxi-ehci sunxi-ehci.2: SW USB2.0 'Enhanced' Host Controller (EHCI) Driver
  477. [ 1.357149] sunxi-ehci sunxi-ehci.2: new USB bus registered, assigned bus number 2
  478. [ 1.366905] sunxi-ehci sunxi-ehci.2: irq 106, io mem 0xf1c1b000
  479. [ 1.390103] sunxi-ehci sunxi-ehci.2: USB 0.0 started, EHCI 1.00
  480. [ 1.398202] hub 2-0:1.0: USB hub found
  481. [ 1.402518] hub 2-0:1.0: 1 port detected
  482. [ 1.407908] ehci_irq: highspeed device connect
  483. [ 1.412270] ehci_irq: highspeed device disconnect
  484. [ 1.427924] sunxi-ehci sunxi-ehci.3: SW USB2.0 'Enhanced' Host Controller (EHCI) Driver
  485. [ 1.437095] sunxi-ehci sunxi-ehci.3: new USB bus registered, assigned bus number 3
  486. [ 1.446958] sunxi-ehci sunxi-ehci.3: irq 108, io mem 0xf1c1c000
  487. [ 1.470084] sunxi-ehci sunxi-ehci.3: USB 0.0 started, EHCI 1.00
  488. [ 1.478171] hub 3-0:1.0: USB hub found
  489. [ 1.482477] hub 3-0:1.0: 1 port detected
  490. [ 1.507882] sunxi-ehci sunxi-ehci.4: SW USB2.0 'Enhanced' Host Controller (EHCI) Driver
  491. [ 1.516980] sunxi-ehci sunxi-ehci.4: new USB bus registered, assigned bus number 4
  492. [ 1.526813] sunxi-ehci sunxi-ehci.4: irq 110, io mem 0xf1c1d000
  493. [ 1.550082] sunxi-ehci sunxi-ehci.4: USB 0.0 started, EHCI 1.00
  494. [ 1.556757] ehci_irq: highspeed device connect
  495. [ 1.558072] hub 4-0:1.0: USB hub found
  496. [ 1.562375] hub 4-0:1.0: 1 port detected
  497. [ 1.567698] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
  498. [ 1.574824] ehci_irq: highspeed device connect
  499. [ 1.579196] ehci_irq: highspeed device disconnect
  500. [ 1.594845] sunxi-ohci sunxi-ohci.1: SW USB2.0 'Open' Host Controller (OHCI) Driver
  501. [ 1.603542] sunxi-ohci sunxi-ohci.1: new USB bus registered, assigned bus number 5
  502. [ 1.612172] sunxi-ohci sunxi-ohci.1: irq 105, io mem 0xf1c1a400
  503. [ 1.675375] hub 5-0:1.0: USB hub found
  504. [ 1.679636] hub 5-0:1.0: 1 port detected
  505. [ 1.705128] sunxi-ohci sunxi-ohci.2: SW USB2.0 'Open' Host Controller (OHCI) Driver
  506. [ 1.713825] sunxi-ohci sunxi-ohci.2: new USB bus registered, assigned bus number 6
  507. [ 1.722440] sunxi-ohci sunxi-ohci.2: irq 107, io mem 0xf1c1b400
  508. [ 1.785481] hub 6-0:1.0: USB hub found
  509. [ 1.789743] hub 6-0:1.0: 1 port detected
  510. [ 1.795161] ehci_irq: highspeed device connect
  511. [ 1.799526] ehci_irq: highspeed device disconnect
  512. [ 1.815176] sunxi-ohci sunxi-ohci.3: SW USB2.0 'Open' Host Controller (OHCI) Driver
  513. [ 1.823874] sunxi-ohci sunxi-ohci.3: new USB bus registered, assigned bus number 7
  514. [ 1.832499] sunxi-ohci sunxi-ohci.3: irq 109, io mem 0xf1c1c400
  515. [ 1.890147] usb 4-1: new high-speed USB device number 2 using sunxi-ehci
  516. [ 1.895478] hub 7-0:1.0: USB hub found
  517. [ 1.895525] hub 7-0:1.0: 1 port detected
  518. [ 1.916473] sunxi-ohci sunxi-ohci.4: SW USB2.0 'Open' Host Controller (OHCI) Driver
  519. [ 1.925177] sunxi-ohci sunxi-ohci.4: new USB bus registered, assigned bus number 8
  520. [ 1.933811] sunxi-ohci sunxi-ohci.4: irq 111, io mem 0xf1c1d400
  521. [ 2.005450] hub 8-0:1.0: USB hub found
  522. [ 2.009699] hub 8-0:1.0: 1 port detected
  523. [ 2.015188] Initializing USB Mass Storage driver...
  524. [ 2.021304] usbcore: registered new interface driver usb-storage
  525. [ 2.028128] USB Mass Storage support registered.
  526. [ 2.033503] usbcore: registered new interface driver ums-alauda
  527. [ 2.040350] usbcore: registered new interface driver ums-cypress
  528. [ 2.047284] usbcore: registered new interface driver ums-datafab
  529. [ 2.054250] usbcore: registered new interface driver ums_eneub6250
  530. [ 2.061425] usbcore: registered new interface driver ums-freecom
  531. [ 2.068378] usbcore: registered new interface driver ums-isd200
  532. [ 2.075237] usbcore: registered new interface driver ums-jumpshot
  533. [ 2.082298] usbcore: registered new interface driver ums-karma
  534. [ 2.089019] usbcore: registered new interface driver ums-onetouch
  535. [ 2.096105] usbcore: registered new interface driver ums-realtek
  536. [ 2.103109] usbcore: registered new interface driver ums-sddr09
  537. [ 2.109934] usbcore: registered new interface driver ums-sddr55
  538. [ 2.116888] usbcore: registered new interface driver ums-usbat
  539. [ 2.123876] usbcore: registered new interface driver usbserial
  540. [ 2.130508] usbserial: USB Serial Driver core
  541. [ 2.135556] usbcore: registered new interface driver option
  542. [ 2.141972] USB Serial support registered for GSM modem (1-port)
  543. [ 2.150712] file system registered
  544. [ 2.158724] android_usb gadget: Mass Storage Function, version: 2009/09/11
  545. [ 2.166578] android_usb gadget: Number of LUNs=3
  546. [ 2.171842] lun0: LUN: removable file: (no medium)
  547. [ 2.177354] lun1: LUN: removable file: (no medium)
  548. [ 2.182914] lun2: LUN: removable file: (no medium)
  549. [ 2.189278] android_usb gadget: android_usb ready
  550. [ 2.195021] uinput result 0 , vmouse_init
  551. [ 2.196574] mousedev: PS/2 mouse device common for all mice
  552. [ 2.203450] sunxikbd_init failed.
  553. [ 2.203486] ls_fetch_sysconfig_para: type err device_used = 0.
  554. [ 2.210300] =========script_get_err============
  555. [ 2.215406] ltr_init: ls_fetch_sysconfig_para err.
  556. [ 2.216135] [RTC] WARNING: Rtc time will be wrong!!
  557. [ 2.221693] [RTC] WARNING: use *internal OSC* as clock source
  558. [ 2.228814] sunxi-rtc sunxi-rtc: rtc core: registered sunxi-rtc as rtc0
  559. [ 2.236631] IR RC5(x) protocol handler initialized
  560. [ 2.242305] sunxi tsc version 0.1
  561. [ 2.242435] tscdev_init: tsc driver is disabled
  562. [ 2.247808] sunxi cedar version 0.1
  563. [ 2.247919] [cedar]: install start!!!
  564. [ 2.248487] [cedar]: install end!!!
  565. [ 2.248574] sunxi_wdt_init_module: sunxi WatchDog Timer Driver v1.0
  566. [ 2.256105] sunxi_wdt_probe: devm_ioremap return wdt_reg 0xf1c20ca0, res->start 0x01c20ca0, res->end 0x01c20cbf
  567. [ 2.267657] sunxi_wdt_probe: initialized (g_timeout=16s, g_nowayout=0)
  568. [ 2.275254] wdt_enable, write reg 0xf1c20cb8 val 0x00000000
  569. [ 2.281574] timeout_to_interv, line 167
  570. [ 2.285897] interv_to_timeout, line 189
  571. [ 2.290266] wdt_set_tmout, write 0x000000b0 to mode reg 0xf1c20cb8, actual timeout 16 sec
  572. [ 2.300756] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
  573. [ 2.311201] calibrat: max_cpufreq 1200Mhz Type 0!
  574. [ 2.311237] [cpu_freq] ERR:get cpu extremity frequency from sysconfig failed, use max_freq
  575. [ 2.322533] [mmc]: SD/MMC/SDIO Host Controller Driver(v1.121 2016-08-3 16:46) Compiled in Apr 14 2017 at 10:41:41
  576. [ 2.322572] [mmc]: get mmc0's sdc_power is null!
  577. [ 2.322602] [mmc]: get mmc1's sdc_power is null!
  578. [ 2.322612] [mmc]: get mmc1's 2xmode ok, val = 1
  579. [ 2.322623] [mmc]: get mmc1's ddrmode ok, val = 1
  580. [ 2.322641] [mmc]: MMC host used card: 0x3, boot card: 0x1, io_card 2
  581. [ 2.323706] [mmc]: sdc0 set ios: clk 0Hz bm OD pm OFF vdd 3.3V width 1 timing LEGACY(SDR12) dt B
  582. [ 2.324838] [mmc]: sdc0 set ios: clk 0Hz bm PP pm UP vdd 3.3V width 1 timing LEGACY(SDR12) dt B
  583. [ 2.325523] [mmc]: sdc1 set ios: clk 0Hz bm OD pm OFF vdd 3.3V width 1 timing LEGACY(SDR12) dt B
  584. [ 2.326385] [mmc]: sdc0 power_supply is null
  585. [ 2.330146] usbcore: registered new interface driver usbhid
  586. [ 2.336398] usbhid: USB HID core driver
  587. [ 2.340064] [mmc]: sdc0 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
  588. [ 2.341339] ashmem: initialized
  589. [ 2.344992] logger: created 256K log 'log_main'
  590. [ 2.350193] logger: created 256K log 'log_events'
  591. [ 2.355567] logger: created 256K log 'log_radio'
  592. [ 2.360879] [mmc]: *** sunxi_mci_dump_errinfo(L915):
  593. [ 2.360888] logger: created 256K log 'log_system'
  594. [ 2.361287] sunxi_oops: heming add OOPS_INFO_ADDR = -20
  595. [ 2.370855] smc 0 err, cmd 52, RTO !!
  596. [ 2.372796] [mmc]: *** sunxi_mci_dump_errinfo(L915): smc 0 err, cmd 52, RTO !!
  597. [ 2.372848] [mmc]: sdc0 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
  598. [ 2.374526] asoc: sndcodec <-> sunxi-codec mapping ok
  599. [ 2.375402] [mmc]: sdc0 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
  600. [ 2.376877] *******************Try sdio*******************
  601. [ 2.377708] [mmc]: *** sunxi_mci_dump_errinfo(L915): smc 0 err, cmd 5, RTO !!
  602. [ 2.377740] mmc0: req failed (CMD5): -110, retrying...
  603. [ 2.378570] [mmc]: *** sunxi_mci_dump_errinfo(L915): smc 0 err, cmd 5, RTO !!
  604. [ 2.378604] mmc0: req failed (CMD5): -110, retrying...
  605. [ 2.379433] [mmc]: *** sunxi_mci_dump_errinfo(L915): smc 0 err, cmd 5, RTO !!
  606. [ 2.379466] mmc0: req failed (CMD5): -110, retrying...
  607. [ 2.380295] [mmc]: *** sunxi_mci_dump_errinfo(L915): smc 0 err, cmd 5, RTO !!
  608. [ 2.380328] *******************Try sd *******************
  609. [ 2.381013] [mmc]: sdc0 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
  610. [ 2.381141] [mmc]: sdc0 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
  611. [ 2.383662] [mmc]: sdc0 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
  612. [ 2.414058] asoc: sndhdmi <-> sunxi-hdmiaudio.0 mapping ok
  613. [ 2.421390] pktgen: Packet Generator for packet performance testing. Version: 2.74
  614. [ 2.430396] u32 classifier
  615. [ 2.433411] Actions configured
  616. [ 2.437194] Netfilter messages via NETLINK v0.30.
  617. [ 2.441640] [mmc]: sdc0 set ios: clk 25000000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
  618. [ 2.442528] nf_conntrack version 0.5.0 (16026 buckets, 64104 max)
  619. [ 2.447795] [mmc]: sdc0 set ios: clk 25000000Hz bm PP pm ON vdd 3.3V width 1 timing SD-HS(SDR25) dt B
  620. [ 2.447893] [mmc]: sdc0 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V width 1 timing SD-HS(SDR25) dt B
  621. [ 2.448039] [mmc]: sdc0 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V width 4 timing SD-HS(SDR25) dt B
  622. [ 2.448137] mmc0: new high speed SDHC card at address aaaa
  623. [ 2.448609] mmcblk0: mmc0:aaaa SL08G 7.40 GiB
  624. [ 2.449929] mmcblk0: p1 p2
  625. [ 2.450773] *******************sd init ok*******************
  626. [ 2.470313] ctnetlink v0.93: registering with nfnetlink.
  627. [ 2.476278] NF_TPROXY: Transparent proxy support initialized, version 4.1.0
  628. [ 2.484052] NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd.
  629. [ 2.490935] xt_time: kernel timezone is -0000
  630. [ 2.495958] IPv4 over IPv4 tunneling driver
  631. [ 2.501162] gre: GRE over IPv4 demultiplexor driver
  632. [ 2.506592] ip_gre: GRE over IPv4 tunneling driver
  633. [ 2.512720] ip_tables: (C) 2000-2006 Netfilter Core Team
  634. [ 2.518851] arp_tables: (C) 2002 David S. Miller
  635. [ 2.524084] TCP: cubic registered
  636. [ 2.527792] Initializing XFRM netlink socket
  637. [ 2.532970] NET: Registered protocol family 10
  638. [ 2.539301] Mobile IPv6
  639. [ 2.542088] ip6_tables: (C) 2000-2006 Netfilter Core Team
  640. [ 2.548295] IPv6 over IPv4 tunneling driver
  641. [ 2.554274] NET: Registered protocol family 17
  642. [ 2.559251] NET: Registered protocol family 15
  643. [ 2.564413] Bluetooth: RFCOMM TTY layer initialized
  644. [ 2.569854] Bluetooth: RFCOMM socket layer initialized
  645. [ 2.575598] Bluetooth: RFCOMM ver 1.11
  646. [ 2.579771] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
  647. [ 2.585742] Bluetooth: BNEP filters: protocol multicast
  648. [ 2.591618] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
  649. [ 2.598364] L2TP core driver, V2.0
  650. [ 2.602193] PPPoL2TP kernel driver, V2.0
  651. [ 2.606557] L2TP IP encapsulation support (L2TPv3)
  652. [ 2.611995] L2TP netlink interface
  653. [ 2.615807] L2TP ethernet pseudowire support (L2TPv3)
  654. [ 2.621733] VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 5
  655. [ 2.630315] ThumbEE CPU extension supported.
  656. [ 2.635083] Registering SWP/SWPB emulation handler
  657. [ 2.640461] sunxi_bootup_extend_init: bootup extend state 1
  658. [ 2.648024] SUNXI_TVE_VBASE f1e00000
  659. [ 2.648347] cmdline,disp=
  660. [ 2.651354] New Platfrom support TV!!!!!!
  661. [ 2.651752] [DISP] disp_init_tv,line:540:screen 0 do not support TV TYPE!
  662. [ 2.659316] screen 1 support TV type
  663. [ 2.659331] [DISP] bsp_disp_tv_register,line:946:'ptv is null
  664. [ 2.665755] tv registered!!
  665. [ 2.665801] attched ok, mgr1<-->device1, type=2, mode=11
  666. [ 2.670383] sunxi-rtc sunxi-rtc: setting system clock to 1970-01-01 00:00:08 UTC (8)
  667. [ 2.679078] ths_fetch_sysconfig_para: type err device_used = 1.
  668. [ 2.687462] CPU Budget:Register notifier
  669. [ 2.691876] CPU Budget:register Success
  670. [ 2.696146] sunxi-budget-cooling sunxi-budget-cooling: Cooling device registered: thermal-budget-0
  671. [ 2.710397] [rf_pm]: Did not config module_power1 in sys_config
  672. [ 2.710412] [rf_pm]: Did not config module_power2 in sys_config
  673. [ 2.710424] [rf_pm]: Did not config module_power3 in sys_config
  674. [ 2.710436] [rf_pm]: mod has no chip_en gpio
  675. [ 2.710447] [rf_pm]: regulator on.
  676. [ 2.710465] [rf_pm]: set losc_out 32k out
  677. [ 2.710993] [rfkill]: init no bt used in configuration
  678. [ 2.711006] ALSA device list:
  679. [ 2.714317] #0: audiocodec
  680. [ 2.717519] #1: sndhdmi
  681. [ 2.744675] EXT4-fs (mmcblk0p2): recovery complete
  682. [ 2.751753] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
  683. [ 2.760841] VFS: Mounted root (ext4 filesystem) on device 179:2.
  684. [ 2.770111] devtmpfs: mounted
  685. [ 2.773782] Freeing init memory: 324K
  686. [ 3.220298] systemd[1]: systemd 215 running in system mode. (+PAM +AUDIT +SELINUX +IMA +SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ -SECCOMP -APPARMOR)
  687. [ 3.235494] systemd[1]: Detected architecture 'arm'.
  688. [ 3.273593] systemd[1]: Failed to insert module 'autofs4'
  689. [ 3.287947] systemd[1]: Set hostname to <OrangePizero>.
  690. [ 3.560949] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
  691. [ 3.569865] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
  692. [ 3.578395] systemd[1]: Expecting device dev-ttyS0.device...
  693. [ 3.585185] systemd[1]: Starting Remote File Systems (Pre).
  694. [ 3.591702] systemd[1]: Reached target Remote File Systems (Pre).
  695. [ 3.598556] systemd[1]: Starting Encrypted Volumes.
  696. [ 3.604271] systemd[1]: Reached target Encrypted Volumes.
  697. [ 3.610395] systemd[1]: Starting Dispatch Password Requests to Console Directory Watch.
  698. [ 3.619529] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
  699. [ 3.628443] systemd[1]: Starting Paths.
  700. [ 3.633027] systemd[1]: Reached target Paths.
  701. [ 3.638007] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
  702. [ 3.648545] systemd[1]: Starting Swap.
  703. [ 3.652992] systemd[1]: Reached target Swap.
  704. [ 3.657799] systemd[1]: Expecting device dev-mmcblk0p1.device...
  705. [ 3.664751] systemd[1]: Starting Root Slice.
  706. [ 3.669857] systemd[1]: Created slice Root Slice.
  707. [ 3.675167] systemd[1]: Starting User and Session Slice.
  708. [ 3.681593] systemd[1]: Created slice User and Session Slice.
  709. [ 3.688042] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
  710. [ 3.695876] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
  711. [ 3.703804] systemd[1]: Starting Delayed Shutdown Socket.
  712. [ 3.710232] systemd[1]: Listening on Delayed Shutdown Socket.
  713. [ 3.716682] systemd[1]: Starting Journal Socket (/dev/log).
  714. [ 3.723289] systemd[1]: Listening on Journal Socket (/dev/log).
  715. [ 3.729951] systemd[1]: Starting udev Control Socket.
  716. [ 3.735966] systemd[1]: Listening on udev Control Socket.
  717. [ 3.742072] systemd[1]: Starting udev Kernel Socket.
  718. [ 3.747942] systemd[1]: Listening on udev Kernel Socket.
  719. [ 3.753953] systemd[1]: Starting Journal Socket.
  720. [ 3.759478] systemd[1]: Listening on Journal Socket.
  721. [ 3.765134] systemd[1]: Starting System Slice.
  722. [ 3.770530] systemd[1]: Created slice System Slice.
  723. [ 3.776064] systemd[1]: Started File System Check on Root Device.
  724. [ 3.782922] systemd[1]: Starting system-getty.slice.
  725. [ 3.788953] systemd[1]: Created slice system-getty.slice.
  726. [ 3.795047] systemd[1]: Starting system-serial\x2dgetty.slice.
  727. [ 3.802008] systemd[1]: Created slice system-serial\x2dgetty.slice.
  728. [ 3.809072] systemd[1]: Mounted POSIX Message Queue File System.
  729. [ 3.815859] systemd[1]: Mounted Huge Pages File System.
  730. [ 3.822146] systemd[1]: Starting Create list of required static device nodes for the current kernel...
  731. [ 3.900622] systemd[1]: Starting udev Coldplug all Devices...
  732. [ 3.990952] systemd[1]: Mounting Debug File System...
  733. [ 4.124322] systemd[1]: Starting Load Kernel Modules...
  734. [ 4.203512] systemd[1]: Started Set Up Additional Binary Formats.
  735. [ 4.210521] systemd[1]: Starting LSB: Set keymap...
  736. [ 4.296776] RTL871X: module init start
  737. [ 4.296795] RTL871X: rtl8189es v4.3.10_12447.20141008
  738. [ 4.296806] RTL871X: build time: Apr 14 2017 10:43:40
  739. [ 4.296824] [wifi_pm]: set wl_reg_on 0 !
  740. [ 4.320586] systemd[1]: Starting Journal Service...
  741. [ 4.346858] [wifi_pm]: set wl_reg_on 1 !
  742. [ 4.381260] systemd[1]: Started Journal Service.
  743. [ 4.446956] [mmc]: sdc1 set ios: clk 0Hz bm PP pm UP vdd 3.3V width 1 timing LEGACY(SDR12) dt B
  744. [ 4.447082] RTL871X: module init ret=0
  745. [ 4.448526] [mmc]: sdc1 power_supply is null
  746. [ 4.454742] this module is used not!
  747. [ 4.458769] gpio_init finish with uesd 0!
  748. [ 4.460074] [mmc]: sdc1 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
  749. [ 4.482417] [mmc]: *** sunxi_mci_dump_errinfo(L915): smc 1 err, cmd 52, RTO !!
  750. [ 4.483283] [mmc]: *** sunxi_mci_dump_errinfo(L915): smc 1 err, cmd 52, RTO !!
  751. [ 4.483322] [mmc]: sdc1 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
  752. [ 4.485873] [mmc]: sdc1 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
  753. [ 4.487824] [mmc]: *** sunxi_mci_dump_errinfo(L915): smc 1 err, cmd 8, RTO !!
  754. [ 4.487857] *******************Try sdio*******************
  755. [ 4.494817] [mmc]: *** sunxi_mci_dump_errinfo(L915): smc 1 err, cmd 5, RTO !!
  756. [ 4.494853] mmc1: req failed (CMD5): -110, retrying...
  757. [ 4.501417] [mmc]: *** sunxi_mci_dump_errinfo(L915): smc 1 err, cmd 5, RTO !!
  758. [ 4.501456] mmc1: req failed (CMD5): -110, retrying...
  759. [ 4.507986] [mmc]: *** sunxi_mci_dump_errinfo(L915): smc 1 err, cmd 5, RTO !!
  760. [ 4.508024] mmc1: req failed (CMD5): -110, retrying...
  761. [ 4.514658] [mmc]: *** sunxi_mci_dump_errinfo(L915): smc 1 err, cmd 5, RTO !!
  762. [ 4.514743] *******************Try sd *******************
  763. [ 4.521650] [mmc]: *** sunxi_mci_dump_errinfo(L915): smc 1 err, cmd 55, RTO !!
  764. [ 4.522538] [mmc]: *** sunxi_mci_dump_errinfo(L915): smc 1 err, cmd 55, RTO !!
  765. [ 4.523405] [mmc]: *** sunxi_mci_dump_errinfo(L915): smc 1 err, cmd 55, RTO !!
  766. [ 4.524281] [mmc]: *** sunxi_mci_dump_errinfo(L915): smc 1 err, cmd 55, RTO !!
  767. [ 4.524333] *******************Try mmc*******************
  768. [ 4.530382] [mmc]: sdc1 set ios: clk 400000Hz bm OD pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
  769. [ 4.531369] [mmc]: *** sunxi_mci_dump_errinfo(L915): smc 1 err, cmd 1, RTO !!
  770. [ 4.531420] [mmc]: sdc1 set ios: clk 0Hz bm OD pm OFF vdd 3.3V width 1 timing LEGACY(SDR12) dt B
  771. [ 4.531588] [mmc]: sdc1 power_supply is null
  772. [ 4.534217] [mmc]: sdc1 set ios: clk 0Hz bm PP pm UP vdd 3.3V width 1 timing LEGACY(SDR12) dt B
  773. [ 4.535764] [mmc]: sdc1 power_supply is null
  774. [ 4.550094] [mmc]: sdc1 set ios: clk 300000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
  775. [ 4.572706] [mmc]: *** sunxi_mci_dump_errinfo(L915): smc 1 err, cmd 52, RTO !!
  776. [ 4.573840] [mmc]: *** sunxi_mci_dump_errinfo(L915): smc 1 err, cmd 52, RTO !!
  777. [ 4.573884] [mmc]: sdc1 set ios: clk 300000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
  778. [ 4.576574] [mmc]: sdc1 set ios: clk 300000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
  779. [ 4.578811] [mmc]: *** sunxi_mci_dump_errinfo(L915): smc 1 err, cmd 8, RTO !!
  780. [ 4.578849] *******************Try sdio*******************
  781. [ 4.586078] [mmc]: *** sunxi_mci_dump_errinfo(L915): smc 1 err, cmd 5, RTO !!
  782. [ 4.586118] mmc1: req failed (CMD5): -110, retrying...
  783. [ 4.592958] [mmc]: *** sunxi_mci_dump_errinfo(L915): smc 1 err, cmd 5, RTO !!
  784. [ 4.593024] mmc1: req failed (CMD5): -110, retrying...
  785. [ 4.599854] [mmc]: *** sunxi_mci_dump_errinfo(L915): smc 1 err, cmd 5, RTO !!
  786. [ 4.599905] mmc1: req failed (CMD5): -110, retrying...
  787. [ 4.606732] [mmc]: *** sunxi_mci_dump_errinfo(L915): smc 1 err, cmd 5, RTO !!
  788. [ 4.606773] *******************Try sd *******************
  789. [ 4.613892] [mmc]: *** sunxi_mci_dump_errinfo(L915): smc 1 err, cmd 55, RTO !!
  790. [ 4.615022] [mmc]: *** sunxi_mci_dump_errinfo(L915): smc 1 err, cmd 55, RTO !!
  791. [ 4.616151] [mmc]: *** sunxi_mci_dump_errinfo(L915): smc 1 err, cmd 55, RTO !!
  792. [ 4.617278] [mmc]: *** sunxi_mci_dump_errinfo(L915): smc 1 err, cmd 55, RTO !!
  793. [ 4.617316] *******************Try mmc*******************
  794. [ 4.623348] [mmc]: sdc1 set ios: clk 300000Hz bm OD pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
  795. [ 4.624605] [mmc]: *** sunxi_mci_dump_errinfo(L915): smc 1 err, cmd 1, RTO !!
  796. [ 4.624649] [mmc]: sdc1 set ios: clk 0Hz bm OD pm OFF vdd 3.3V width 1 timing LEGACY(SDR12) dt B
  797. [ 4.624815] [mmc]: sdc1 power_supply is null
  798. [ 4.627431] [mmc]: sdc1 set ios: clk 0Hz bm PP pm UP vdd 3.3V width 1 timing LEGACY(SDR12) dt B
  799. [ 4.628970] [mmc]: sdc1 power_supply is null
  800. [ 4.650063] [mmc]: sdc1 set ios: clk 200000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
  801. [ 4.673197] [mmc]: *** sunxi_mci_dump_errinfo(L915): smc 1 err, cmd 52, RTO !!
  802. [ 4.674871] [mmc]: *** sunxi_mci_dump_errinfo(L915): smc 1 err, cmd 52, RTO !!
  803. [ 4.674914] [mmc]: sdc1 set ios: clk 200000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
  804. [ 4.677892] [mmc]: sdc1 set ios: clk 200000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
  805. [ 4.680697] [mmc]: *** sunxi_mci_dump_errinfo(L915): smc 1 err, cmd 8, RTO !!
  806. [ 4.680735] *******************Try sdio*******************
  807. [ 4.688477] [mmc]: *** sunxi_mci_dump_errinfo(L915): smc 1 err, cmd 5, RTO !!
  808. [ 4.688515] mmc1: req failed (CMD5): -110, retrying...
  809. [ 4.695882] [mmc]: *** sunxi_mci_dump_errinfo(L915): smc 1 err, cmd 5, RTO !!
  810. [ 4.695921] mmc1: req failed (CMD5): -110, retrying...
  811. [ 4.703300] [mmc]: *** sunxi_mci_dump_errinfo(L915): smc 1 err, cmd 5, RTO !!
  812. [ 4.703364] mmc1: req failed (CMD5): -110, retrying...
  813. [ 4.710741] [mmc]: *** sunxi_mci_dump_errinfo(L915): smc 1 err, cmd 5, RTO !!
  814. [ 4.710822] *******************Try sd *******************
  815. [ 4.718492] [mmc]: *** sunxi_mci_dump_errinfo(L915): smc 1 err, cmd 55, RTO !!
  816. [ 4.720162] [mmc]: *** sunxi_mci_dump_errinfo(L915): smc 1 err, cmd 55, RTO !!
  817. [ 4.721827] [mmc]: *** sunxi_mci_dump_errinfo(L915): smc 1 err, cmd 55, RTO !!
  818. [ 4.723487] [mmc]: *** sunxi_mci_dump_errinfo(L915): smc 1 err, cmd 55, RTO !!
  819. [ 4.723519] *******************Try mmc*******************
  820. [ 4.729536] [mmc]: sdc1 set ios: clk 200000Hz bm OD pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
  821. [ 4.731368] [mmc]: *** sunxi_mci_dump_errinfo(L915): smc 1 err, cmd 1, RTO !!
  822. [ 4.731409] [mmc]: sdc1 set ios: clk 0Hz bm OD pm OFF vdd 3.3V width 1 timing LEGACY(SDR12) dt B
  823. [ 4.731575] [mmc]: sdc1 power_supply is null
  824. [ 4.734187] [mmc]: sdc1 set ios: clk 0Hz bm PP pm UP vdd 3.3V width 1 timing LEGACY(SDR12) dt B
  825. [ 4.735722] [mmc]: sdc1 power_supply is null
  826. [ 4.750043] [mmc]: sdc1 set ios: clk 150000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
  827. [ 4.773731] [mmc]: *** sunxi_mci_dump_errinfo(L915): smc 1 err, cmd 52, RTO !!
  828. [ 4.775938] [mmc]: *** sunxi_mci_dump_errinfo(L915): smc 1 err, cmd 52, RTO !!
  829. [ 4.775975] [mmc]: sdc1 set ios: clk 150000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
  830. [ 4.779176] [mmc]: sdc1 set ios: clk 150000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
  831. [ 4.782545] [mmc]: *** sunxi_mci_dump_errinfo(L915): smc 1 err, cmd 8, RTO !!
  832. [ 4.782577] *******************Try sdio*******************
  833. [ 4.790864] [mmc]: *** sunxi_mci_dump_errinfo(L915): smc 1 err, cmd 5, RTO !!
  834. [ 4.790932] mmc1: req failed (CMD5): -110, retrying...
  835. [ 4.798884] [mmc]: *** sunxi_mci_dump_errinfo(L915): smc 1 err, cmd 5, RTO !!
  836. [ 4.798962] mmc1: req failed (CMD5): -110, retrying...
  837. [ 4.806918] [mmc]: *** sunxi_mci_dump_errinfo(L915): smc 1 err, cmd 5, RTO !!
  838. [ 4.806961] mmc1: req failed (CMD5): -110, retrying...
  839. [ 4.814879] [mmc]: *** sunxi_mci_dump_errinfo(L915): smc 1 err, cmd 5, RTO !!
  840. [ 4.814915] *******************Try sd *******************
  841. [ 4.823171] [mmc]: *** sunxi_mci_dump_errinfo(L915): smc 1 err, cmd 55, RTO !!
  842. [ 4.825443] [mmc]: *** sunxi_mci_dump_errinfo(L915): smc 1 err, cmd 55, RTO !!
  843. [ 4.827718] [mmc]: *** sunxi_mci_dump_errinfo(L915): smc 1 err, cmd 55, RTO !!
  844. [ 4.829972] [mmc]: *** sunxi_mci_dump_errinfo(L915): smc 1 err, cmd 55, RTO !!
  845. [ 4.830067] *******************Try mmc*******************
  846. [ 4.836111] [mmc]: sdc1 set ios: clk 150000Hz bm OD pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
  847. [ 4.838512] [mmc]: *** sunxi_mci_dump_errinfo(L915): smc 1 err, cmd 1, RTO !!
  848. [ 4.838555] [mmc]: sdc1 set ios: clk 0Hz bm OD pm OFF vdd 3.3V width 1 timing LEGACY(SDR12) dt B
  849. [ 4.838721] [mmc]: sdc1 power_supply is null
  850. [ 5.124833] systemd-udevd[115]: starting version 215
  851. [ 5.568406] cdc_ether 4-1:2.0: eth1: register 'cdc_ether' at usb-sunxi-ehci-1, CDC Ethernet Device, 00:e0:4c:36:06:30
  852. [ 5.582321] usbcore: registered new interface driver cdc_ether
  853. [ 5.655746] usbcore: registered new interface driver r8152
  854. [ 11.481595] EXT4-fs (mmcblk0p2): re-mounted. Opts: errors=remount-ro
  855. [ 12.717558] systemd-journald[109]: Received request to flush runtime journal from PID 1
  856. [ 23.132050] gmac0: probed
  857. [ 23.132385] gmac0 gmac0: eth0: eth0: PHY ID 00441400 at 0 IRQ poll (gmac0-0:00)
  858. [ 24.817169] vmouse_input_dev_open
  859. root@OrangePizero:~# ls -la /boot/
  860. total 39476
  861. drwxr-xr-x 2 root root 4096 Aug 28 2015 .
  862. drwxr-xr-x 21 root root 4096 Jan 1 1970 ..
  863. -rwxr-xr-x 1 root root 32768 Aug 31 2015 boot0_OPI.fex
  864. -rw-r--r-- 1 root root 36064 Aug 31 2015 script.bin.OPI-2_1080p50
  865. -rw-r--r-- 1 root root 36064 Aug 31 2015 script.bin.OPI-2_1080p60
  866. -rw-r--r-- 1 root root 36064 Aug 31 2015 script.bin.OPI-2_720p50
  867. -rw-r--r-- 1 root root 36064 Aug 31 2015 script.bin.OPI-2_720p60
  868. -rw-r--r-- 1 root root 36084 Aug 31 2015 script.bin.OPI-PC_1080p50
  869. -rw-r--r-- 1 root root 36084 Aug 31 2015 script.bin.OPI-PC_1080p60
  870. -rw-r--r-- 1 root root 36084 Aug 31 2015 script.bin.OPI-PC_720p50
  871. -rw-r--r-- 1 root root 36084 Aug 31 2015 script.bin.OPI-PC_720p60
  872. -rw-r--r-- 1 root root 37128 Aug 31 2015 script.bin.OPI-PLUS_1080p50
  873. -rw-r--r-- 1 root root 37128 Aug 31 2015 script.bin.OPI-PLUS_1080p60
  874. -rw-r--r-- 1 root root 37128 Aug 31 2015 script.bin.OPI-PLUS_720p50
  875. -rw-r--r-- 1 root root 37128 Aug 31 2015 script.bin.OPI-PLUS_720p60
  876. -rw-r--r-- 1 root root 901120 Aug 31 2015 u-boot_OPI-emmc.fex
  877. -rw-r--r-- 1 root root 901120 Aug 31 2015 u-boot_OPI.fex
  878. -rw-r--r-- 1 root root 8029624 Aug 31 2015 uImage
  879. -rw-r--r-- 1 root root 8029624 Aug 31 2015 uImage_OPI-2
  880. -rw-r--r-- 1 root root 7011072 Aug 28 2015 uImage_OPI-2_NO_BUDGET_COOLING
  881. -rw-r--r-- 1 root root 8029616 Aug 31 2015 uImage_OPI-PLUS
  882. -rw-r--r-- 1 root root 7010944 Aug 28 2015 uImage_OPI-PLUS_NO_BUDGET_COOLING
  883. root@OrangePizero:~# df -h
  884. Filesystem Size Used Avail Use% Mounted on
  885. /dev/root 1.2G 1.1G 51M 96% /
  886. devtmpfs 351M 0 351M 0% /dev
  887. tmpfs 501M 0 501M 0% /dev/shm
  888. tmpfs 501M 13M 489M 3% /run
  889. tmpfs 5.0M 4.0K 5.0M 1% /run/lock
  890. tmpfs 501M 0 501M 0% /sys/fs/cgroup
  891. tmpfs 501M 4.0K 501M 1% /tmp
  892. /dev/mmcblk0p1 63M 4.6M 59M 8% /media/boot
  893. tmpfs 101M 0 101M 0% /run/user/107
  894. tmpfs 101M 0 101M 0% /run/user/0
  895. root@OrangePizero:~# ls -la /media/boot/
  896. total 4617
  897. drwxr-xr-x 4 root root 1536 Jan 1 1970 .
  898. drwxr-xr-x 12 root root 4096 Dec 2 2016 ..
  899. -rwxr-xr-x 1 root root 538 Dec 2 2016 boot.scr
  900. drwxr-xr-x 2 root root 512 Aug 19 2017 .fseventsd
  901. -rwxr-xr-x 1 root root 35260 Apr 6 14:28 script.bin
  902. drwxr-xr-x 2 root root 512 Aug 19 2017 .Trashes
  903. -rwxr-xr-x 1 root root 4096 Aug 19 2017 ._.Trashes
  904. -rwxr-xr-x 1 root root 4680288 Apr 20 15:50 uImage
  905. root@OrangePizero:~# apt-get install sunxi-tools
  906. Reading package lists... Done
  907. Building dependency tree
  908. Reading state information... Done
  909. Recommended packages:
  910. u-boot
  911. The following NEW packages will be installed:
  912. sunxi-tools
  913. 0 upgraded, 1 newly installed, 0 to remove and 165 not upgraded.
  914. Need to get 17.7 kB of archives.
  915. After this operation, 93.2 kB of additional disk space will be used.
  916. Get:1 http://ftp.hr.debian.org/debian/ jessie/main sunxi-tools armhf 1.2-2 [17.7 kB]
  917. Fetched 17.7 kB in 0s (129 kB/s)
  918. Selecting previously unselected package sunxi-tools.
  919. (Reading database ... 41164 files and directories currently installed.)
  920. Preparing to unpack .../sunxi-tools_1.2-2_armhf.deb ...
  921. Unpacking sunxi-tools (1.2-2) ...
  922. Setting up sunxi-tools (1.2-2) ...
  923. root@OrangePizero:~# bin2fex /media/boot/script.bin
  924. fexc-bin: /media/boot/script.bin: version: 35260.1.2
  925. fexc-bin: /media/boot/script.bin: size: 35260 (80 sections)
  926. [product]
  927. version = "100"
  928. machine = "dolphin_p2"
  929.  
  930. [platform]
  931. debug_mode = 1
  932. eraseflag = 1
  933. next_work = 3
  934. secure_without_OS = 1
  935.  
  936. [target]
  937. boot_clock = 1008
  938. storage_type = -1
  939. burn_key = 1
  940.  
  941. [key_detect_en]
  942. keyen_flag = 0
  943.  
  944. [fel_key]
  945. fel_key_max = 7
  946. fel_key_min = 2
  947.  
  948. [card_boot]
  949. logical_start = 40960
  950. sprite_work_delay = 500
  951. sprite_err_delay = 200
  952. sprite_gpio0 = port:PA17<1><default><default><default>
  953. next_work = 3
  954.  
  955. [box_start_os]
  956. used = 1
  957. start_type = 1
  958. irkey_used = 1
  959. pmukey_used = 0
  960. pmukey_num = 0
  961. led_power = 0
  962. led_state = 0
  963.  
  964. [boot_init_gpio]
  965. used = 1
  966. gpio0 = port:PL10<1><default><default><0>
  967. gpio1 = port:PA17<1><default><default><1>
  968.  
  969. [recovery_para]
  970. used = 1
  971. mode = 2
  972. recovery_key = port:PL04<0><default><default><default>
  973.  
  974. [pm_para]
  975. standby_mode = 1
  976.  
  977. [card0_boot_para]
  978. card_ctrl = 0
  979. card_high_speed = 1
  980. card_line = 4
  981. sdc_d1 = port:PF00<2><1><2><default>
  982. sdc_d0 = port:PF01<2><1><2><default>
  983. sdc_clk = port:PF02<2><1><2><default>
  984. sdc_cmd = port:PF03<2><1><2><default>
  985. sdc_d3 = port:PF04<2><1><2><default>
  986. sdc_d2 = port:PF05<2><1><2><default>
  987.  
  988. [card2_boot_para]
  989. card_ctrl = 2
  990. card_high_speed = 1
  991. card_line = 8
  992. sdc_cmd = port:PC06<3><1><2><default>
  993. sdc_clk = port:PC05<3><1><2><default>
  994. sdc_d0 = port:PC08<3><1><2><default>
  995. sdc_d1 = port:PC09<3><1><2><default>
  996. sdc_d2 = port:PC10<3><1><2><default>
  997. sdc_d3 = port:PC11<3><1><2><default>
  998. sdc_d4 = port:PC12<3><1><2><default>
  999. sdc_d5 = port:PC13<3><1><2><default>
  1000. sdc_d6 = port:PC14<3><1><2><default>
  1001. sdc_d7 = port:PC15<3><1><2><default>
  1002. sdc_2xmode = 1
  1003. sdc_ddrmode = 1
  1004.  
  1005. [twi_para]
  1006. twi_port = 0
  1007. twi_scl = port:PA11<2><default><default><default>
  1008. twi_sda = port:PA12<2><default><default><default>
  1009.  
  1010. [uart_para]
  1011. uart_debug_port = 0
  1012. uart_debug_tx = port:PA04<2><1><default><default>
  1013. uart_debug_rx = port:PA05<2><1><default><default>
  1014.  
  1015. [force_uart_para]
  1016. force_uart_port = 0
  1017. force_uart_tx =
  1018. force_uart_rx =
  1019.  
  1020. [jtag_para]
  1021. jtag_enable = 0
  1022. jtag_ms = port:PA00<3><default><default><default>
  1023. jtag_ck = port:PA01<3><default><default><default>
  1024. jtag_do = port:PA02<3><default><default><default>
  1025. jtag_di = port:PA03<3><default><default><default>
  1026.  
  1027. [clock]
  1028. pll_video = 297
  1029. pll_ve = 402
  1030. pll_periph0 = 600
  1031. pll_gpu = 576
  1032. pll_periph1 = 600
  1033. pll_de = 864
  1034.  
  1035. [dram_para]
  1036. dram_clk = 576
  1037. dram_type = 3
  1038. dram_zq = 0x3b3bfb
  1039. dram_odt_en = 1
  1040. dram_para1 = 283377664
  1041. dram_para2 = 0
  1042. dram_mr0 = 6208
  1043. dram_mr1 = 64
  1044. dram_mr2 = 24
  1045. dram_mr3 = 2
  1046. dram_tpr0 = 0x48a192
  1047. dram_tpr1 = 0x1c2418d
  1048. dram_tpr2 = 0x76051
  1049. dram_tpr3 = 0x0
  1050. dram_tpr4 = 0x0
  1051. dram_tpr5 = 0x0
  1052. dram_tpr6 = 0x64
  1053. dram_tpr7 = 0x13890240
  1054. dram_tpr8 = 0x0
  1055. dram_tpr9 = 0x0
  1056. dram_tpr10 = 0x0
  1057. dram_tpr11 = 0x6aaa0000
  1058. dram_tpr12 = 0x7979
  1059. dram_tpr13 = 0x1802800
  1060.  
  1061. [wakeup_src_para]
  1062. cpu_en = 0
  1063. cpu_freq = 48
  1064. pll_ratio = 273
  1065. dram_selfresh_en = 1
  1066. dram_freq = 36
  1067. wakeup_src0 =
  1068. wakeup_src_wl = port:PG10<4><default><default><0>
  1069. wakeup_src_bt = port:PL03<6><default><default><0>
  1070.  
  1071. [twi0]
  1072. twi_used = 1
  1073. twi_scl = port:PA11<2><default><default><default>
  1074. twi_sda = port:PA12<2><default><default><default>
  1075.  
  1076. [twi1]
  1077. twi_used = 1
  1078. twi_scl = port:PA18<3><default><default><default>
  1079. twi_sda = port:PA19<3><default><default><default>
  1080.  
  1081. [twi2]
  1082. twi_used = 0
  1083. twi_scl = port:PE12<3><default><default><default>
  1084. twi_sda = port:PE13<3><default><default><default>
  1085.  
  1086. [uart0]
  1087. uart_used = 1
  1088. uart_port = 0
  1089. uart_type = 2
  1090. uart_tx = port:PA04<2><1><default><default>
  1091. uart_rx = port:PA05<2><1><default><default>
  1092.  
  1093. [uart1]
  1094. uart_used = 1
  1095. uart_port = 1
  1096. uart_type = 2
  1097. uart_tx = port:PG06<2><1><default><default>
  1098. uart_rx = port:PG07<2><1><default><default>
  1099.  
  1100. [uart2]
  1101. uart_used = 1
  1102. uart_port = 2
  1103. uart_type = 2
  1104. uart_tx = port:PA00<2><1><default><default>
  1105. uart_rx = port:PA01<2><1><default><default>
  1106.  
  1107. [uart3]
  1108. uart_used = 0
  1109. uart_port = 3
  1110. uart_type = 2
  1111. uart_tx = port:PA13<3><1><default><default>
  1112. uart_rx = port:PA14<3><1><default><default>
  1113.  
  1114. [spi0]
  1115. spi_used = 1
  1116. spi_cs_bitmap = 1
  1117. spi_mosi = port:PC00<3><default><default><default>
  1118. spi_miso = port:PC01<3><default><default><default>
  1119. spi_sclk = port:PC02<3><default><default><default>
  1120. spi_cs0 = port:PC03<3><1><default><default>
  1121.  
  1122. [spi1]
  1123. spi_used = 0
  1124. spi_cs_bitmap = 1
  1125. spi_cs0 = port:PA13<2><1><default><default>
  1126. spi_sclk = port:PA14<2><default><default><default>
  1127. spi_mosi = port:PA15<2><default><default><default>
  1128. spi_miso = port:PA16<2><default><default><default>
  1129.  
  1130. [spi_devices]
  1131. spi_dev_num = 1
  1132.  
  1133. [spi_board0]
  1134. modalias = "m25p32"
  1135. max_speed_hz = 33000000
  1136. bus_num = 0
  1137. chip_select = 0
  1138. mode = 0
  1139.  
  1140. [gpio_para]
  1141. gpio_used = 0
  1142. gpio_num = 2
  1143. gpio_pin_1 = port:PA07<1><default><default><0>
  1144. gpio_pin_2 = port:PA10<1><default><default><0>
  1145.  
  1146. [led_assign]
  1147. normal_led = "gpio_pin_2"
  1148. standby_led = "gpio_pin_1"
  1149.  
  1150. [ths_para]
  1151. ths_used = 1
  1152. ths_trip1_count = 8
  1153. ths_trip1_0 = 65
  1154. ths_trip1_1 = 70
  1155. ths_trip1_2 = 75
  1156. ths_trip1_3 = 80
  1157. ths_trip1_4 = 85
  1158. ths_trip1_5 = 90
  1159. ths_trip1_6 = 95
  1160. ths_trip1_7 = 105
  1161. ths_trip1_0_min = 0
  1162. ths_trip1_0_max = 1
  1163. ths_trip1_1_min = 1
  1164. ths_trip1_1_max = 2
  1165. ths_trip1_2_min = 2
  1166. ths_trip1_2_max = 3
  1167. ths_trip1_3_min = 3
  1168. ths_trip1_3_max = 4
  1169. ths_trip1_4_min = 4
  1170. ths_trip1_4_max = 6
  1171. ths_trip1_5_min = 6
  1172. ths_trip1_5_max = 8
  1173. ths_trip1_6_min = 8
  1174. ths_trip1_6_max = 10
  1175. ths_trip1_7_min = 0
  1176. ths_trip1_7_max = 0
  1177. ths_trip2_count = 1
  1178. ths_trip2_0 = 105
  1179.  
  1180. [cooler_table]
  1181. cooler_count = 11
  1182. cooler0 = "1200000 4 4294967295 0"
  1183. cooler1 = "1008000 4 4294967295 0"
  1184. cooler2 = "816000 4 4294967295 0"
  1185. cooler3 = "720000 4 4294967295 0"
  1186. cooler4 = "648000 4 4294967295 0"
  1187. cooler5 = "480000 4 4294967295 0"
  1188. cooler6 = "312000 4 4294967295 0"
  1189. cooler7 = "240000 4 4294967295 0"
  1190. cooler8 = "240000 3 4294967295 0"
  1191. cooler9 = "240000 2 4294967295 0"
  1192. cooler10 = "240000 1 4294967295 0"
  1193.  
  1194. [nand0_para]
  1195. nand_support_2ch = 0
  1196. nand_cache_level = 1
  1197. nand0_used = 0
  1198. nand0_we = port:PC00<2><0><1><default>
  1199. nand0_ale = port:PC01<2><0><1><default>
  1200. nand0_cle = port:PC02<2><0><1><default>
  1201. nand0_ce1 = port:PC03<2><1><1><default>
  1202. nand0_ce0 = port:PC04<2><1><1><default>
  1203. nand0_nre = port:PC05<2><0><1><default>
  1204. nand0_rb0 = port:PC06<2><1><1><default>
  1205. nand0_rb1 = port:PC07<2><1><1><default>
  1206. nand0_d0 = port:PC08<2><0><1><default>
  1207. nand0_d1 = port:PC09<2><0><1><default>
  1208. nand0_d2 = port:PC10<2><0><1><default>
  1209. nand0_d3 = port:PC11<2><0><1><default>
  1210. nand0_d4 = port:PC12<2><0><1><default>
  1211. nand0_d5 = port:PC13<2><0><1><default>
  1212. nand0_d6 = port:PC14<2><0><1><default>
  1213. nand0_d7 = port:PC15<2><0><1><default>
  1214. nand0_ndqs = port:PC16<2><0><1><default>
  1215.  
  1216. [boot_disp]
  1217. advert_disp = 1
  1218. auto_hpd = 1
  1219. output_type = 2
  1220. hdmi_channel = 0
  1221. hdmi_mode = 4
  1222. cvbs_channel = 1
  1223. cvbs_mode = 11
  1224. output_full = 1
  1225. hdmi_mode_check = 1
  1226.  
  1227. [disp_init]
  1228. disp_init_enable = 1
  1229. disp_mode = 1
  1230. screen0_output_type = 2
  1231. screen0_output_mode = 11
  1232. screen1_output_type = 2
  1233. screen1_output_mode = 11
  1234. fb0_format = 0
  1235. fb0_width = 0
  1236. fb0_height = 0
  1237. fb1_format = 0
  1238. fb1_width = 0
  1239. fb1_height = 0
  1240.  
  1241. [hdmi_para]
  1242. hdmi_used = 0
  1243. hdmi_power = "vcc-hdmi-18"
  1244.  
  1245. [tv_para]
  1246. tv_used = 1
  1247. tv_dac_used = 1
  1248. tv_dac_src0 = 0
  1249.  
  1250. [pwm0_para]
  1251. pwm_used = 0
  1252. pwm_positive = port:PA05<3><0><default><default>
  1253.  
  1254. [pwm1_para]
  1255. pwm_used = 0
  1256. pwm_positive = port:PA06<3><0><default><default>
  1257.  
  1258. [gmac0]
  1259. gmac_used = 2
  1260. gmac_power1 =
  1261.  
  1262. [csi0]
  1263. vip_used = 0
  1264. vip_mode = 0
  1265. vip_dev_qty = 1
  1266. vip_define_sensor_list = 0
  1267. vip_csi_pck = port:PE00<2><default><default><default>
  1268. vip_csi_mck = port:PE01<2><default><default><default>
  1269. vip_csi_hsync = port:PE02<2><default><default><default>
  1270. vip_csi_vsync = port:PE03<2><default><default><default>
  1271. vip_csi_d0 = port:PE04<2><default><default><default>
  1272. vip_csi_d1 = port:PE05<2><default><default><default>
  1273. vip_csi_d2 = port:PE06<2><default><default><default>
  1274. vip_csi_d3 = port:PE07<2><default><default><default>
  1275. vip_csi_d4 = port:PE08<2><default><default><default>
  1276. vip_csi_d5 = port:PE09<2><default><default><default>
  1277. vip_csi_d6 = port:PE10<2><default><default><default>
  1278. vip_csi_d7 = port:PE11<2><default><default><default>
  1279. vip_csi_sck = port:PE12<2><default><default><default>
  1280. vip_csi_sda = port:PE13<2><default><default><default>
  1281. vip_dev0_mname = "gc2035"
  1282. vip_dev0_pos = "front"
  1283. vip_dev0_lane = 1
  1284. vip_dev0_twi_id = 2
  1285. vip_dev0_twi_addr = 120
  1286. vip_dev0_isp_used = 0
  1287. vip_dev0_fmt = 0
  1288. vip_dev0_stby_mode = 0
  1289. vip_dev0_vflip = 1
  1290. vip_dev0_hflip = 1
  1291. vip_dev0_iovdd = ""
  1292. vip_dev0_iovdd_vol = 2800000
  1293. vip_dev0_avdd = ""
  1294. vip_dev0_avdd_vol = 2800000
  1295. vip_dev0_dvdd = ""
  1296. vip_dev0_dvdd_vol = 1800000
  1297. vip_dev0_afvdd = ""
  1298. vip_dev0_afvdd_vol = 2800000
  1299. vip_dev0_power_en = port:PA17<1><default><default><1>
  1300. vip_dev0_reset = port:PE14<1><default><default><1>
  1301. vip_dev0_pwdn = port:PE15<1><default><default><0>
  1302. vip_dev0_flash_en =
  1303. vip_dev0_flash_mode =
  1304. vip_dev0_af_pwdn =
  1305. vip_dev0_act_used = 0
  1306. vip_dev0_act_name = "ad5820_act"
  1307. vip_dev0_act_slave = 24
  1308. vip_dev1_mname = ""
  1309. vip_dev1_pos = "rear"
  1310. vip_dev1_lane = 1
  1311. vip_dev1_twi_id = 0
  1312. vip_dev1_twi_addr =
  1313. vip_dev1_isp_used = 0
  1314. vip_dev1_fmt = 1
  1315. vip_dev1_stby_mode = 0
  1316. vip_dev1_vflip = 0
  1317. vip_dev1_hflip = 0
  1318. vip_dev1_iovdd = ""
  1319. vip_dev1_iovdd_vol = 2800000
  1320. vip_dev1_avdd = ""
  1321. vip_dev1_avdd_vol = 2800000
  1322. vip_dev1_dvdd = ""
  1323. vip_dev1_dvdd_vol = 1500000
  1324. vip_dev1_afvdd = ""
  1325. vip_dev1_afvdd_vol = 2800000
  1326. vip_dev1_power_en =
  1327. vip_dev1_reset =
  1328. vip_dev1_pwdn =
  1329. vip_dev1_flash_en =
  1330. vip_dev1_flash_mode =
  1331. vip_dev1_af_pwdn =
  1332.  
  1333. [tvout_para]
  1334. tvout_used = 1
  1335. tvout_channel_num = 1
  1336. tv_en =
  1337.  
  1338. [tvin_para]
  1339. tvin_used =
  1340. tvin_channel_num =
  1341.  
  1342. [di_para]
  1343. di_used = 1
  1344.  
  1345. [mmc0_para]
  1346. sdc_used = 1
  1347. sdc_detmode = 3
  1348. sdc_buswidth = 4
  1349. sdc_clk = port:PF02<2><1><2><default>
  1350. sdc_cmd = port:PF03<2><1><2><default>
  1351. sdc_d0 = port:PF01<2><1><2><default>
  1352. sdc_d1 = port:PF00<2><1><2><default>
  1353. sdc_d2 = port:PF05<2><1><2><default>
  1354. sdc_d3 = port:PF04<2><1><2><default>
  1355. sdc_det = port:PF06<0><1><2><default>
  1356. sdc_use_wp = 0
  1357. sdc_wp =
  1358. sdc_isio = 0
  1359. sdc_regulator = "none"
  1360. sdc_power_supply = "none"
  1361.  
  1362. [mmc1_para]
  1363. sdc_used = 1
  1364. sdc_detmode = 4
  1365. sdc_buswidth = 4
  1366. sdc_clk = port:PG00<2><1><2><default>
  1367. sdc_cmd = port:PG01<2><1><2><default>
  1368. sdc_d0 = port:PG02<2><1><2><default>
  1369. sdc_d1 = port:PG03<2><1><2><default>
  1370. sdc_d2 = port:PG04<2><1><2><default>
  1371. sdc_d3 = port:PG05<2><1><2><default>
  1372. sdc_det =
  1373. sdc_use_wp = 0
  1374. sdc_wp =
  1375. sdc_isio = 1
  1376. sdc_regulator = "none"
  1377. sdc_power_supply = "none"
  1378. sdc_2xmode = 1
  1379. sdc_ddrmode = 1
  1380.  
  1381. [mmc2_para]
  1382. sdc_used = 0
  1383. sdc_detmode = 3
  1384. sdc_buswidth = 8
  1385. sdc_clk = port:PC05<3><1><2><default>
  1386. sdc_cmd = port:PC06<3><1><2><default>
  1387. sdc_d0 = port:PC08<3><1><2><default>
  1388. sdc_d1 = port:PC09<3><1><2><default>
  1389. sdc_d2 = port:PC10<3><1><2><default>
  1390. sdc_d3 = port:PC11<3><1><2><default>
  1391. sdc_d4 = port:PC12<3><1><2><default>
  1392. sdc_d5 = port:PC13<3><1><2><default>
  1393. sdc_d6 = port:PC14<3><1><2><default>
  1394. sdc_d7 = port:PC15<3><1><2><default>
  1395. emmc_rst = port:PC16<3><1><2><default>
  1396. sdc_det =
  1397. sdc_use_wp = 0
  1398. sdc_wp =
  1399. sdc_isio = 0
  1400. sdc_regulator = "none"
  1401. sdc_power_supply = "none"
  1402. sdc_2xmode = 1
  1403. sdc_ddrmode = 1
  1404.  
  1405. [smc_para]
  1406. smc_used =
  1407. smc_rst = port:PA09<2><default><default><default>
  1408. smc_vppen = port:PA20<3><default><default><default>
  1409. smc_vppp = port:PA21<3><default><default><default>
  1410. smc_det = port:PA10<2><default><default><default>
  1411. smc_vccen = port:PA06<2><default><default><default>
  1412. smc_sck = port:PA07<2><default><default><default>
  1413. smc_sda = port:PA08<2><default><default><default>
  1414.  
  1415. [usbc0]
  1416. usb_used = 1
  1417. usb_port_type = 2
  1418. usb_detect_type = 0
  1419. usb_id_gpio = port:PG12<0><1><default><default>
  1420. usb_det_vbus_gpio = port:PG12<0><1><default><default>
  1421. usb_drv_vbus_gpio = port:PL02<1><0><default><0>
  1422. usb_host_init_state = 1
  1423. usb_restrict_gpio =
  1424. usb_restric_flag = 0
  1425. usb_restric_voltage = 3550000
  1426. usb_restric_capacity = 5
  1427. usb_regulator_io = "nocare"
  1428. usb_regulator_vol = 0
  1429. usb_not_suspend = 0
  1430.  
  1431. [usbc1]
  1432. usb_used = 1
  1433. usb_drv_vbus_gpio =
  1434. usb_restrict_gpio =
  1435. usb_host_init_state = 1
  1436. usb_restric_flag = 0
  1437. usb_regulator_io = "nocare"
  1438. usb_regulator_vol = 0
  1439. usb_not_suspend = 0
  1440.  
  1441. [usbc2]
  1442. usb_used = 1
  1443. usb_drv_vbus_gpio =
  1444. usb_restrict_gpio =
  1445. usb_host_init_state = 1
  1446. usb_restric_flag = 0
  1447. usb_regulator_io = "nocare"
  1448. usb_regulator_vol = 0
  1449. usb_not_suspend = 0
  1450.  
  1451. [usbc3]
  1452. usb_used = 1
  1453. usb_drv_vbus_gpio =
  1454. usb_restrict_gpio =
  1455. usb_host_init_state = 1
  1456. usb_restric_flag = 0
  1457. usb_regulator_io = "nocare"
  1458. usb_regulator_vol = 0
  1459. usb_not_suspend = 0
  1460.  
  1461. [usb_feature]
  1462. vendor_id = 6353
  1463. mass_storage_id = 1
  1464. adb_id = 2
  1465. manufacturer_name = "USB Developer"
  1466. product_name = "Android"
  1467. serial_number = "20080411"
  1468.  
  1469. [msc_feature]
  1470. vendor_name = "USB 2.0"
  1471. product_name = "USB Flash Driver"
  1472. release = 100
  1473. luns = 3
  1474.  
  1475. [serial_feature]
  1476. serial_unique = 0
  1477.  
  1478. [module_para]
  1479. module_power0 = port:PA20<1><default><default><0>
  1480. module_power0_vol = 1
  1481. module_power1 =
  1482. module_power1_vol =
  1483. module_power2 =
  1484. module_power2_vol =
  1485. module_power3 =
  1486. module_power3_vol =
  1487. module_select_pin0 =
  1488. module_select_pin1 =
  1489. chip_en =
  1490. lpo_use_apclk = "losc_out"
  1491.  
  1492. [wifi_para]
  1493. wifi_used = 1
  1494. wifi_sdc_id = 1
  1495. wifi_usbc_id = 3
  1496. wifi_usbc_type = 1
  1497. wl_reg_on = port:PL07<1><default><default><0>
  1498. wl_host_wake = port:PG10<0><default><default><0>
  1499. wl_host_wake_invert = 0
  1500.  
  1501. [bt_para]
  1502. bt_used = 0
  1503. bt_uart_id = 1
  1504. bt_uart_baud = 1500000
  1505. bt_rst_n = port:PL01<1><default><default><0>
  1506. bt_wake = port:PA12<1><default><default><0>
  1507. bt_host_wake = port:PL06<0><default><default><0>
  1508. bt_host_wake_invert = 0
  1509.  
  1510. [pcm0]
  1511. daudio_used = 0
  1512. daudio_master = 4
  1513. daudio_select = 1
  1514. audio_format = 1
  1515. signal_inversion = 1
  1516. mclk_fs = 128
  1517. sample_resolution = 16
  1518. slot_width_select = 32
  1519. pcm_lrck_period = 32
  1520. pcm_lrckr_period = 1
  1521. msb_lsb_first = 0
  1522. sign_extend = 0
  1523. slot_index = 0
  1524. slot_width = 32
  1525. frame_width = 0
  1526. tx_data_mode = 0
  1527. rx_data_mode = 0
  1528. i2s_mclk = port:PA18<2><1><default><default>
  1529. i2s_bclk = port:PA19<2><1><default><default>
  1530. i2s_dout0 = port:PA20<2><1><default><default>
  1531. i2s_din = port:PA21<2><1><default><default>
  1532.  
  1533. [pcm1]
  1534. daudio_used = 0
  1535. daudio_master = 4
  1536. daudio_select = 1
  1537. audio_format = 1
  1538. signal_inversion = 1
  1539. mclk_fs = 128
  1540. sample_resolution = 16
  1541. slot_width_select = 32
  1542. pcm_lrck_period = 32
  1543. pcm_lrckr_period = 1
  1544. msb_lsb_first = 0
  1545. sign_extend = 0
  1546. slot_index = 0
  1547. slot_width = 32
  1548. frame_width = 0
  1549. tx_data_mode = 0
  1550. rx_data_mode = 0
  1551. i2s_mclk = port:PG10<2><1><default><default>
  1552. i2s_bclk = port:PG11<2><1><default><default>
  1553. i2s_dout0 = port:PG12<2><1><default><default>
  1554. i2s_din = port:PG13<2><1><default><default>
  1555.  
  1556. [audio0]
  1557. audio_used = 1
  1558. lineout_vol = 31
  1559. cap_vol = 5
  1560. audio_hp_ldo = "none"
  1561. adcagc_used = 0
  1562. adcdrc_used = 0
  1563. dacdrc_used = 0
  1564. adchpf_used = 0
  1565. dachpf_used = 0
  1566. audio_pa_ctrl = port:PA10<1><default><default><0>
  1567.  
  1568. [spdif0]
  1569. spdif_used = 1
  1570. spdif_dout = port:PA17<2><1><default><default>
  1571.  
  1572. [audiohub]
  1573. hub_used = 0
  1574. codec_used = 1
  1575. spdif_used = 1
  1576. hdmi_used = 0
  1577.  
  1578. [s_cir0]
  1579. ir_used = 1
  1580. ir_rx = port:PL11<2><1><default><default>
  1581. ir_power_key_code0 = 87
  1582. ir_addr_code0 = 40704
  1583. ir_power_key_code1 = 26
  1584. ir_addr_code1 = 64260
  1585. ir_power_key_code2 = 20
  1586. ir_addr_code2 = 32640
  1587. ir_power_key_code3 = 21
  1588. ir_addr_code3 = 32640
  1589. ir_power_key_code4 = 11
  1590. ir_addr_code4 = 63240
  1591. ir_power_key_code5 = 3
  1592. ir_addr_code5 = 239
  1593. ir_power_key_code6 = 159
  1594. ir_addr_code6 = 19635
  1595. ir_power_key_code7 = 10
  1596. ir_addr_code7 = 30536
  1597. ir_power_key_code8 = 69
  1598. ir_addr_code8 = 48386
  1599. ir_power_key_code9 = 77
  1600. ir_addr_code9 = 56865
  1601. ir_power_key_code10 = 24
  1602. ir_addr_code10 = 65025
  1603. ir_power_key_code11 = 87
  1604. ir_addr_code11 = 65280
  1605. ir_power_key_code12 = 77
  1606. ir_addr_code12 = 65344
  1607. ir_power_key_code13 = 136
  1608. ir_addr_code13 = 56610
  1609.  
  1610. [cir]
  1611. ir_used = 0
  1612. ir_tx = port:PH07<2><default><default><default>
  1613.  
  1614. [dvfs_table]
  1615. pmuic_type = 1
  1616. pmu_gpio0 = port:PL06<1><1><2><1>
  1617. pmu_level0 = 11300
  1618. pmu_level1 = 1100
  1619. max_freq = 1200000000
  1620. min_freq = 240000000
  1621. boot_freq = 1008000000
  1622. LV_count = 6
  1623. LV1_freq = 1200000000
  1624. LV1_volt = 1300
  1625. LV2_freq = 1008000000
  1626. LV2_volt = 1300
  1627. LV3_freq = 912000000
  1628. LV3_volt = 1100
  1629. LV4_freq = 648000000
  1630. LV4_volt = 1100
  1631. LV5_freq = 480000000
  1632. LV5_volt = 1100
  1633. LV6_freq = 240000000
  1634. LV6_volt = 1100
  1635.  
  1636. [gpu_dvfs_table]
  1637. G_LV_count = 3
  1638. G_LV0_freq = 312000000
  1639. G_LV0_volt = 1200000
  1640. G_LV1_freq = 384000000
  1641. G_LV1_volt = 1200000
  1642. G_LV2_freq = 456000000
  1643. G_LV2_volt = 1200000
  1644.  
  1645. [board_vendor]
  1646. vid_used = 0
  1647. vid_count = 6
  1648. vid_bit_0 = port:PD16<0><1><default><default>
  1649. vid_bit_1 = port:PD15<0><1><default><default>
  1650. vid_bit_2 = port:PD14<0><1><default><default>
  1651. vid_bit_3 = port:PD13<0><1><default><default>
  1652. vid_bit_4 = port:PD12<0><1><default><default>
  1653. vid_bit_5 = port:PD17<0><1><default><default>
  1654.  
  1655. [Vdevice]
  1656. Vdevice_used = 0
  1657. Vdevice_0 = port:PH10<5><1><2><default>
  1658. Vdevice_1 = port:PH11<5><1><2><default>
  1659.  
  1660. [s_uart0]
  1661. s_uart_used = 0
  1662. s_uart_tx = port:PL02<2><default><default><default>
  1663. s_uart_rx = port:PL03<2><default><default><default>
  1664.  
  1665. [s_rsb0]
  1666. s_rsb_used = 1
  1667. s_rsb_sck = port:PL00<2><1><2><default>
  1668. s_rsb_sda = port:PL01<2><1><2><default>
  1669.  
  1670. [s_jtag0]
  1671. s_jtag_used = 0
  1672. s_jtag_tms = port:PL04<2><1><2><default>
  1673. s_jtag_tck = port:PL05<2><1><2><default>
  1674. s_jtag_tdo = port:PL06<2><1><2><default>
  1675. s_jtag_tdi = port:PL07<2><1><2><default>
  1676.  
  1677. [s_powchk]
  1678. s_powchk_used = -2147483648
  1679. s_power_reg = 0
  1680. s_system_power = 50
  1681.  
  1682. [sim0]
  1683. scr_used = 0
  1684. scr_vccen = port:PA06<2><default><default><default>
  1685. scr_slk = port:PA07<2><default><default><default>
  1686. scr_sda = port:PA08<2><default><default><default>
  1687. scr_rst = port:PA09<2><default><default><default>
  1688. scr_det = port:PA10<2><default><default><default>
  1689.  
  1690. [ts0]
  1691. tsc_used = 0
  1692. tsc_clk = port:PE00<3><default><default><default>
  1693. tsc_err = port:PE01<3><default><default><default>
  1694. tsc_sync = port:PE02<3><default><default><default>
  1695. tsc_dvld = port:PE03<3><default><default><default>
  1696. tsc_d0 = port:PE04<3><default><default><default>
  1697. tsc_d1 = port:PE05<3><default><default><default>
  1698. tsc_d2 = port:PE06<3><default><default><default>
  1699. tsc_d3 = port:PE07<3><default><default><default>
  1700. tsc_d4 = port:PE08<3><default><default><default>
  1701. tsc_d5 = port:PE09<3><default><default><default>
  1702. tsc_d6 = port:PE10<3><default><default><default>
  1703. tsc_d7 = port:PE11<3><default><default><default>
  1704.  
  1705. [gpio_power_key]
  1706. key_used = 0
  1707. key_io = port:PL03<6><default><default><0>
  1708.  
  1709. [key_para]
  1710. key_used = 0
  1711. key_cnt = 5
  1712. key1_vol = 222
  1713. key2_vol = 444
  1714. key3_vol = 666
  1715. key4_vol = 857
  1716. key5_vol = 2000
  1717.  
  1718. [d7s_para]
  1719. d7s_used = 0
  1720. din_gpio = port:PD00<1><default><default><1>
  1721. clk_gpio = port:PD01<1><default><default><1>
  1722. stb_gpio = port:PD02<1><default><default><1>
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement
Public Pastes
Advertisement
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!