Decompressing...done
Digital core power voltage set to 1.0V

SHMOO VER 1.13

PKID07DC06011801080000000000001A103F01000000

S300001B7
000011E0


RDLYW0 00000004

RDENW0 00000030

RDQSW0

    0000000000111111111122222222223333333333444444444455555555556666
    0123456789012345678901234567890123456789012345678901234567890123
 00 --+++++++++++++++++++++++X++++++++++++++++++++++----------------
 01 -------++++++++++++++++++++X++++++++++++++++++++----------------
 02 ---------++++++++++++++++++++++X+++++++++++++++++++++-----------
 03 ---++++++++++++++++++++++X++++++++++++++++++++++----------------
 04 ---+++++++++++++++++++++X++++++++++++++++++++-------------------
 05 ------++++++++++++++++++++X++++++++++++++++++++-----------------
 06 ----++++++++++++++++++++++X++++++++++++++++++++++---------------
 07 -----+++++++++++++++++++++X++++++++++++++++++++-----------------
 08 ---++++++++++++++++++++++X+++++++++++++++++++++-----------------
 09 ------++++++++++++++++++++++X+++++++++++++++++++++--------------
 10 -----++++++++++++++++++++++X+++++++++++++++++++++---------------
 11 --++++++++++++++++++++++X+++++++++++++++++++++------------------
 12 --++++++++++++++++++++++X+++++++++++++++++++++------------------
 13 --+++++++++++++++++++++X+++++++++++++++++++++-------------------
 14 -++++++++++++++++++++++X+++++++++++++++++++++-------------------
 15 -+++++++++++++++++++++X+++++++++++++++++++++--------------------


PW0

    0000000000111111111122222222223333333333444444444455555555556666
    0123456789012345678901234567890123456789012345678901234567890123
 00 ++++++++++++++++++++++++X++++++++++++++++++++++++---------------
 01 ++++++++++++++++++++++++X++++++++++++++++++++++++---------------
 02 -++++++++++++++++++++++++++X+++++++++++++++++++++++++-----------
 03 ++++++++++++++++++++++++X+++++++++++++++++++++++----------------
 04 ++++++++++++++++++++++X++++++++++++++++++++++-------------------
 05 ++++++++++++++++++++++++X+++++++++++++++++++++++----------------
 06 ++++++++++++++++++++++++X+++++++++++++++++++++++----------------
 07 +++++++++++++++++++++++X+++++++++++++++++++++++-----------------
 08 +++++++++++++++++++++++X+++++++++++++++++++++++-----------------
 09 +++++++++++++++++++++++++X++++++++++++++++++++++++--------------
 10 ++++++++++++++++++++++++X++++++++++++++++++++++++---------------
 11 +++++++++++++++++++++++X++++++++++++++++++++++------------------
 12 +++++++++++++++++++++++X++++++++++++++++++++++------------------
 13 +++++++++++++++++++++++X++++++++++++++++++++++------------------
 14 ++++++++++++++++++++++X++++++++++++++++++++++-------------------
 15 ++++++++++++++++++++++X+++++++++++++++++++++--------------------


NW0

    0000000000111111111122222222223333333333444444444455555555556666
    0123456789012345678901234567890123456789012345678901234567890123
 00 --+++++++++++++++++++++++X+++++++++++++++++++++++---------------
 01 -------+++++++++++++++++++++X+++++++++++++++++++++--------------
 02 ---------+++++++++++++++++++++++X++++++++++++++++++++++---------
 03 ---+++++++++++++++++++++++X+++++++++++++++++++++++--------------
 04 ----+++++++++++++++++++++X++++++++++++++++++++------------------
 05 -----++++++++++++++++++++++X+++++++++++++++++++++---------------
 06 -----++++++++++++++++++++++X++++++++++++++++++++++--------------
 07 ------+++++++++++++++++++++X++++++++++++++++++++----------------
 08 ----++++++++++++++++++++++X+++++++++++++++++++++----------------
 09 ------++++++++++++++++++++++X+++++++++++++++++++++--------------
 10 ----++++++++++++++++++++++X++++++++++++++++++++++---------------
 11 --++++++++++++++++++++++X+++++++++++++++++++++------------------
 12 --++++++++++++++++++++++X+++++++++++++++++++++------------------
 13 --+++++++++++++++++++++X+++++++++++++++++++++-------------------
 14 -++++++++++++++++++++++X++++++++++++++++++++++------------------
 15 -+++++++++++++++++++++X+++++++++++++++++++++--------------------


WRDQW0

    0000000000111111111122222222223333333333444444444455555555556666
    0123456789012345678901234567890123456789012345678901234567890123
 00 +++++++++++++++++++X+++++++++++++++++++-----------+++++++++++++-
 01 ++++++++++++++++++++++X+++++++++++++++++++++------+++++++++++++-
 02 ++++++++++++++++++++++X++++++++++++++++++++++------++++++++++++-
 03 ++++++++++++++++++++++X++++++++++++++++++++++-----+++++++++++++-
 04 ++++++++++++++++++++X+++++++++++++++++++----------+++++++++++++-
 05 +++++++++++++++++++++X+++++++++++++++++++++--------++++++++++++-
 06 +++++++++++++++++++++X+++++++++++++++++++++--------++++++++++++-
 07 +++++++++++++++++++++X+++++++++++++++++++++-------+++++++++++++-
 08 ++++++++++++++++++++X+++++++++++++++++++----------+++++++++++++-
 09 +++++++++++++++++++++X+++++++++++++++++++++--------++++++++++++-
 10 +++++++++++++++++++++X+++++++++++++++++++++-------+++++++++++++-
 11 +++++++++++++++++++++X++++++++++++++++++++--------+++++++++++++-
 12 ++++++++++++++++++++X+++++++++++++++++++----------+++++++++++++-
 13 +++++++++++++++++++X+++++++++++++++++++------------++++++++++++-
 14 ++++++++++++++++++++X+++++++++++++++++++----------+++++++++++++-
 15 +++++++++++++++++++X+++++++++++++++++++-----------+++++++++++++-


WRDMW0 00000021
WRDMW0 00000020


ADDR

    0000000000111111111122222222223333333333444444444455555555556666
    0123456789012345678901234567890123456789012345678901234567890123
 00 +++++++++++++++++S+++++++++++++X++++++++++++++++++++++++++++++++

Decompressing...done
Detect CPU turbo button...

CFE version 6.37.14.86 (r456083) based on BBP 1.0.37 for BCM947XX (32bit,SP,)
Build Date: 二  4月 22 16:05:16 CST 2014 (raymonddev@raymonddev-vm1210)
Copyright (C) 2000-2008 Broadcom Corporation.

Init Arena
Init Devs.
Boot partition size = 262144(0x40000)
DDR Clock: 800 MHz
Info: DDR frequency set from clkfreq=1000,*800*
et1: Broadcom BCM47XX 10/100/1000 Mbps Ethernet Controller 6.37.14.86 (r456083)
CPU type 0x0: 1000MHz
Tot mem: 262144 KBytes

CFE mem:    0x00F00000 - 0x01795558 (9000280)
Data:       0x00F4DBB4 - 0x00F4E080 (1228)
BSS:        0x00F4E090 - 0x00F93558 (283848)
Heap:       0x00F93558 - 0x01793558 (8388608)
Stack:      0x01793558 - 0x01795558 (8192)
Text:       0x00F00000 - 0x00F4430C (279308)

Device eth0:  hwaddr 38-D5-47-E5-A4-90, ipaddr 192.168.1.1, mask 255.255.255.0
        gateway not set, nameserver not set
Null Rescue Flag.
boot the image...
go load
Loader:raw Filesys:tftp Dev:eth0 File:: Options:(null)
Loading: TFTP Server.
..tftp retry wait 0
Failed.
Could not load :: Timeout occured
Loader:raw Filesys:raw Dev:nflash0.os File: Options:(null)
Loading: .... 4076256 bytes read
Entry at 0x00008000
Closing network.
Starting program at 0x00008000
console [ttyS0] enabled, bootconsole disabled
serial8250.0: ttyS1 at MMIO 0x18000400 (irq = 117) is a 16550
brd: module loaded
loop: module loaded
pflash: found no supported devices
bcmsflash: found no supported devices
Boot partition size = 524288(0x80000)
lookup_nflash_rootfs_offset: offset = 0x200000
nflash: squash filesystem with lzma found at block 28
Creating 4 MTD partitions on "nflash":
0x000000000000-0x000000080000 : "boot"
0x000000080000-0x000000200000 : "nvram"
0x000000200000-0x000004000000 : "linux"
0x00000039fc40-0x000004000000 : "rootfs"
PPP generic driver version 2.4.2
PPP MPPE Compression module registered
NET: Registered protocol family 24
PPTP driver version 0.8.5
Mirror/redirect action on
u32 classifier
    Performance counters on
    Actions configured
Netfilter messages via NETLINK v0.30.
nf_conntrack version 0.5.0 (3991 buckets, 15964 max)
ctnetlink v0.93: registering with nfnetlink.
xt_time: kernel timezone is -0000
ip_tables: (C) 2000-2006 Netfilter Core Team
TCP cubic registered
NET: Registered protocol family 10
ip6_tables: (C) 2000-2006 Netfilter Core Team
NET: Registered protocol family 17
L2TP core driver, V2.0
PPPoL2TP kernel driver, V2.0
802.1Q VLAN Support v1.8 Ben Greear <[email protected]>
All bugs added by David S. Miller <[email protected]>
Registering the dns_resolver key type
Northstar brcmnand NAND Flash Controller driver, Version 0.1 (c) Broadcom Inc. 2012
NAND device: Manufacturer ID: 0x01, Chip ID: 0xf1 (AMD NAND 128MiB 3,3V 8-bit)
Spare area=64 eccbytes 56, ecc bytes located at:
 2 3 4 5 6 7 8 9 10 11 12 13 14 15 18 19 20 21 22 23 24 25 26 27 28 29 30 31 34 35 36 37 38 39 40 41 42 43 44 45 46 47 50 51 52 53 54 55 56 57 58 59 60 61 62 63
Available 7 bytes at (off,len):
(1,1) (16,2) (32,2) (48,2) (0,0) (0,0) (0,0) (0,0)
Scanning device for bad blocks
Options: NO_AUTOINCR,NO_READRDY,BBT_SCAN2NDPAGE,
Creating 2 MTD partitions on "brcmnand":
0x000004000000-0x000007ec0000 : "brcmnand"
0x000007ec0000-0x000008000000 : "asus"
VFS: Mounted root (squashfs filesystem) readonly on device 31:3.
devtmpfs: mounted
Freeing init memory: 212K
init_main start

1: set_action 0


Hit ENTER for console...

firmware version: 384.13_1
[1 preinit:init_nvram +7] init_nvram for model(52)

FA off.
ctf: module license 'Proprietary' taints kernel.
Disabling lock debugging due to kernel taint
et_module_init: passivemode set to 0x0
et_module_init: txworkq set to 0x1
et_module_init: et_txq_thresh set to 0xce4

=================
robo chk regs:
===================
(0x00,0x5d)Port 5 States Override: 0xfb
(0x00,0x5f)Port 7 States Override: 0xfb
(0x00,0x0e)Port 8 States Override: 0x0a
(0x00,0x08)Port 8 IMP Control Register: 0x00
(0x02,0x00) Global Management Config: 0x00
(0x02,0x00) 802.1Q VLAN Control 5: 0x00
(0x02,0x03) BRCM HDR Control Register: 0x00
(0x00,0x0b) Switch Mode Register: 0x06
eth0: Broadcom BCM47XX 10/100/1000 Mbps Ethernet Controller 6.37.14.126 (r561982)
et_probe: mvlan vid[0]: 0
et_probe: mvlan vid[1]: 0

et_probe: mvlan en 0
config_location(0x0045): [tcode] location is []
config_location(0x0048): [tcode] no location setting, using default location
config_location(0x005e): [tcode] config location: [0:ccode]=[EU], [0:regrev]=[13]
config_location(0x0068): [tcode] set_wl_country, 0, [EU], [13]
config_location(0x007e): [tcode] config location 5G: [1:ccode]=[EU], [1:regrev]=[0]
config_location(0x0089): [tcode] set_wl_country, 1, [EU], [0]
set_wltxpower(0x0246): unit: 0, txpower: 100
wltxpower_rtac87u(0x01a5): [100][0:]
wltxpower_rtac87u(0x01ae): txpoewr between: min:[76] to max:[100]
setpoweroffset_rtac87u(0x015f): [3][0:]
setpoweroffset_rtac87u(0x0165): [rc] [0:maxp2ga0]=[0x6A]
setpoweroffset_rtac87u(0x0169): [rc] [0:maxp2ga1]=[0x6A]
setpoweroffset_rtac87u(0x016d): [rc] [0:maxp2ga2]=[0x6A]
set_wltxpower(0x0246): unit: 1, txpower: 100
wltxpower_rtac87u(0x01a5): [100][1:]
wltxpower_rtac87u(0x01ae): txpoewr between: min:[76] to max:[100]
setpoweroffset_rtac87u(0x015f): [3][1:]
setpoweroffset_rtac87u(0x0165): [rc] [1:maxp2ga0]=[0x6A]
setpoweroffset_rtac87u(0x0169): [rc] [1:maxp2ga1]=[0x6A]
setpoweroffset_rtac87u(0x016d): [rc] [1:maxp2ga2]=[0x6A]
hotplug net INTERFACE=eth0 ACTION=add
wl_module_init: passivemode set to 0x0
wl_module_init: igs set to 0x0
wl_module_init: txworkq set to 0x1
wl0: wlc_ap_attach dynamic_ed_thresh_enable = 0
eth1: Broadcom BCM4360 802.11 Wireless Controller 6.37.14.126 (r561982)
hotplug net INTERFACE=eth1 ACTION=add
1: check_action 0: 1(preinit)
start jffs2: 4, 65798144
Empty flash at 0x01a85018 ends at 0x01a85800
start_logger:
_ifconfig: name=eth0 flags=1043 IFUP addr= netmask=
et1: et_mvlan_netdev_event: event 16 for vlan1 mvlan_en 0
et1: et_mvlan_netdev_event: event 5 for vlan1 mvlan_en 0
hotplug net INTERFACE=vlan1 ACTION=add
et1: et_mvlan_netdev_event: event 16 for vlan2 mvlan_en 0
et1: et_mvlan_netdev_event: event 5 for vlan2 mvlan_en 0
hotplug net INTERFACE=vlan2 ACTION=add
update_lan_state(lan_, 0, 0)
update_lan_state(workaround to infosvr)
generate_wl_para(0x0c15): unit 0 subunit -1
generate_wl_para(0x0fde): bw: 0
generate_wl_para(0x0fe0): chanspec: 0
generate_wl_para(0x0fe1): bw_cap: 3
generate_wl_para(0x0fe7): obss_coex: 1
wlconf_pre(0x10b8): set vhtmode 1
generate_wl_para(0x0c15): unit 1 subunit -1
wifi0: cmd=39 (errno 19): No such device
generate_wl_para(0x0fde): bw: 3
generate_wl_para(0x0fe0): chanspec: 0
generate_wl_para(0x0fe1): bw_cap: 7
generate_wl_para(0x0fe7): obss_coex: 0
vlan1et1: et_mvlan_netdev_event: event 13 for vlan1 mvlan_en 0
: cmd=et1: et_mvlan_netdev_event: event 1 for vlan1 mvlan_en 0
14 (errno 95): Operation not supported
_ifconfig: name=vlan1 flags=1243 IFUP addr= netmask=
hotplug net INTERFACE=br0 ACTION=add
_ifconfig: name=eth1 flags=1243 IFUP addr= netmask=
generate_wl_para(0x0c15): unit 0 subunit -1
generate_wl_para(0x0fde): bw: 0
generate_wl_para(0x0fe0): chanspec: 0
generate_wl_para(0x0fe1): bw_cap: 3
generate_wl_para(0x0fe7): obss_coex: 1
generate_wl_para(0x0c15): unit 0 subunit 1
generate_wl_para(0x0c15): unit 0 subunit 2
generate_wl_para(0x0c15): unit 0 subunit 3

start_lan: setting MAC address of bridge br0 as 38:D5:47:E5:A4:90
_ifconfig: name=br0 flags=1243 IFUP addr=192.168.1.1 netmask=255.255.255.0
_ifconfig: name=lo flags=1043 IFUP addr=127.0.0.1 netmask=255.0.0.0
_ifconfig: name=lo:0 flags=1043 IFUP addr=127.0.1.1 netmask=255.0.0.0
route_manip: cmd=ADD name=lo addr=127.0.0.0 netmask=255.0.0.0 gateway=0.0.0.0 metric=0
update_lan_state(lan_, 2, 0)
update_lan_state(workaround to infosvr)
nat_rule: stop_nat_rules 1.
stop_nat_rules: apply the redirect_rules state 0 ret 0
wifi0: WLC_GET_VAR(chanspecs): No such device
failed to get valid chanspec list
wifi0: WLC_GET_VAR(chanspecs): No such device
failed to get valid chanspec list
wifi0: WLC_GET_VAR(chanspecs): No such device
failed to get valid chanspec list
wifi0: WLC_GET_VAR(chanspecs): No such device
failed to get valid chanspec list
# wanduck: Got LAN(-1) information:
wanduck: delay 1 seconds before the first detect...
start_lan 2965
[stateless] channel:[0]
[stateless] bw:[3]
get_tx_power_qtn(0x02ff): txpoewr between: min:[76] to max:[100]
cp: omitting directory '/rom/qtn/boot'
wanduck: delay 2 seconds before the first detect...
wanduck: delay 3 seconds before the first detect...
wanduck: delay 4 seconds before the first detect...
wanduck: delay 5 seconds before the first detect...
wanduck(0): NC send SYS_WAN_MODEM_OFFLINE_EVENT.

# Enable direct rule
wanduck(0): NC send SYS_WAN_CABLE_UNPLUGGED_EVENT.
acsd: scan in progress ...
acsd: scan in progress ...
acsd: scan in progress ...
acsd: scan in progress ...
acsd: scan in progress ...
acsd: scan in progress ...
acsd: scan in progress ...
acsd: scan in progress ...
acsd: scan in progress ...
acsd: scan in progress ...
acsd: selected channel spec: 0x1001 (1)
acsd: Adjusted channel spec: 0x1001 (1)
acsd: selected DFS-exit channel spec: 0x1001 (1)
acsd: selected channel spec: 0x1001 (1)
acsd: Adjusted channel spec: 0x1001 (1)
acsd: selected channel spec: 0x1001 (1)
[1 preinit:start_dnsmasq +25] begin
[1 preinit:stop_dnsmasq +25] begin
[1 preinit:stop_stubby +25] begin
[1 preinit:stop_stubby +25] end
[1 preinit:stop_dnsmasq +25] end
[1 preinit:start_stubby +25] begin
[1 preinit:start_dnsmasq +25] end
start_lan_port(0) 1
msgget ok
TZ watchdog
disk_monitor: starting...
disk_monitor: day=5, week=6, time=5:5.
disk_monitor: decide if scan the target...
disk_monitor: 0: wait_second=64800...
disk_monitor: 1: wait_second=64800...
disk_monitor: wait_second=64800...
disk_monitor: Pause...

Couldn't get the enabled rules of Parental-control correctly!
vlan1: cmd=14 (errno 95): Operation not supported
[bwdpi check] starting...
ATE command error
rpc_qcsapi_init(0x0048): #1 attempt to create RPC connection
[Mastiff]init
start_wan: start_wan_if(0)!
[1 preinit:start_wan_if +27] unit=0.
update_wan_state(wan0_, 0, 0)
convert_wan_nvram(wan0_)
update_wan_state(wan0_, 1, 0)
start_wan_if(0x0697): ifup:eth0
_ifconfig: name=eth0 flags=1043 IFUP addr= netmask=
start_wan_if(0x06ad): start auth:0
start_auth:: done
start_wan_if(0x06b7): start udhcpc:eth0, 0
start_wan_if(): End.
udhcpc_wan:: deconfig
_ifconfig: name=eth0 flags=1043 IFUP addr=0.0.0.0 netmask=
wan_down(eth0)
wan_down(eth0): .
stop_auth:: done
route_manip: cmd=DEL name=eth0 addr=0.0.0.0 netmask=0.0.0.0 gateway=(null) metric=0
update_wan_state(wan0_, 3, 0)
update_wan_state(wan0_, 4, 3)
udhcpc:: deconfig done
Enable USB power.
Start USB with the original procedure.
start_usb
no tune_bdflush
xhci_hcd 0000:00:0c.0: Failed to enable MSI-X
xhci_hcd 0000:00:0c.0: failed to allocate MSI entry
usb usb1: No SuperSpeed endpoint companion for config 1  interface 0 altsetting 0 ep 129: using minimum values
csw_retry 100
[1 preinit:init_main +29] recv signal 14 from pid [1:/sbin/preinit] (from user)
rpc_qcsapi_init(0x0048): #2 attempt to create RPC connection
rpc_qcsapi_init(0x0048): #3 attempt to create RPC connection
udhcpc_wan:: leasefail
[1 preinit:init_main +38] recv signal 14 from pid [1:/sbin/preinit] (from user)
rpc_qcsapi_init(0x0048): #4 attempt to create RPC connection
rpc_qcsapi_init(0x0048): #5 attempt to create RPC connection
rpc_qcsapi_init(0x0048): #6 attempt to create RPC connection
rpc_qcsapi_init(0x0048): #7 attempt to create RPC connection
rpc_qcsapi_init(0x0048): #8 attempt to create RPC connection
rpc_qcsapi_init(0x0048): #9 attempt to create RPC connection
qtn_monitor_main(0x0134): Qcsapi qcsapi init takes 29 seconds
qtn_monitor_main(0x0136): defer lanport_ctrl(1)
2nd jffs2: asus
Mount 2nd jffs2...
267: check_action 0: 1(preinit)
2nd jffs2: 5, 1310720
check_2nd_jffs(0x043d): umount asus_jffs ok
qtn_monitor_main(0x014a): [***] rpc_parse_nvram_from_httpd
rpc_qcsapi_set_SSID(0x00bd): wifi0 as: ASUS_5G
rpc_qcsapi_set_SSID_broadcast(0x00cf): wifi0 as: TRUE
rpc_qcsapi_set_vht(0x00eb): wifi0 as: 11ac
rpc_qcsapi_set_bw(0x010b): wifi0 as: 80 MHz
rpc_qcsapi_set_channel(0x0120): wifi0 as: 0
rpc_qcsapi_set_channel(0x0128): update wireless_conf.txt wifi0 as: 0
rpc_qcsapi_set_beacon_type(0x0145): wifi0 as: Basic
rpc_qcsapi_set_WPA_encryption_modes(0x0162): wifi0 as: TKIPandAESEncryption
rpc_qcsapi_set_key_passphrase(0x0170): wifi0 set_key_passphrase error, return: -22
rpc_qcsapi_set_key_passphrase(0x0174): wifi0 set_pre_shared_key error, return: -22
rpc_qcsapi_set_dtim(0x0187): Qcsapi qcsapi_wifi_set_dtim wifi0 error, return: -1010
rpc_qcsapi_set_beacon_interval(0x019c): wifi0 as: 100
rpc_qcsapi_set_mac_address_filtering(0x01af): wifi0: 0
rpc_qcsapi_set_mac_address_filtering(0x01bf): wifi0 as: 0 (disabled)
rpc_update_ap_isolate(0x0492): qcsapi_wifi_set_ap_isolate OK
rpc_parse_nvram_from_httpd(0x009a): qcsapi_wps_set_ap_pin wifi0 error[-1010]
rpc_parse_nvram_from_httpd(0x00b1): mu-mimo: disable MU-MIMO
qtn_monitor_main(0x014f): [sw_mode] skip start_ap_qtn, QTN will run scripts automatically
qtn_monitor_main(0x0165): [80211h] set_80211h_off
qtn_monitor_main(0x0188): [dbg] qtn_monitor startup
[1 preinit:init_main +61] recv signal 14 from pid [1:/sbin/preinit] (from user)
udhcpc_wan:: leasefail
udhcpc_wan:: leasefail