#
    # Sample configuration file for the Samba suite for Debian GNU/Linux.
    #
    #
    # This is the main Samba configuration file. You should read the
    # smb.conf(5) manual page in order to understand the options listed
    # here. Samba has a huge number of configurable options most of which
    # are not shown in this example
    #
    # Some options that are often worth tuning have been included as
    # commented-out examples in this file.
    #  - When such options are commented with ";", the proposed setting
    #    differs from the default Samba behaviour
    #  - When commented with "#", the proposed setting is the default
    #    behaviour of Samba but the option is considered important
    #    enough to be mentioned here
    #
    # NOTE: Whenever you modify this file you should run the command
    # "testparm" to check that you have not made any basic syntactic
    # errors.
    # A well-established practice is to name the original file
    # "smb.conf.master" and create the "real" config file with
    # testparm -s smb.conf.master >smb.conf
    # This minimizes the size of the really used smb.conf file
    # which, according to the Samba Team, impacts performance
    # However, use this with caution if your smb.conf file contains nested
    # "include" statements. See Debian bug #483187 for a case
    # where using a master file is not a good idea.
    #

    #======================= Global Settings =======================

    [global]

    ## Browsing/Identification ###

    # Change this to the workgroup/NT-domain name your Samba server will part of
       workgroup = hyper
       netbios name = hyper
       map to guest = Bad User
       hosts allow = 192.168.1.

    # server string is the equivalent of the NT Description field
       server string = %h server (Samba, Ubuntu)

    # Windows Internet Name Serving Support Section:
    # WINS Support - Tells the NMBD component of Samba to enable its WINS Server
    #   wins support = no

    # WINS Server - Tells the NMBD components of Samba to be a WINS Client
    # Note: Samba can be either a WINS Server, or a WINS Client, but NOT both
    ;   wins server = w.x.y.z

    # This will prevent nmbd to search for NetBIOS names through DNS.
       dns proxy = no

    # What naming service and in what order should we use to resolve host names
    # to IP addresses
    ;   name resolve order = lmhosts host wins bcast

    #### Networking ####

    # The specific set of interfaces / networks to bind to
    # This can be either the interface name or an IP address/netmask;
    # interface names are normally preferred
    ;   interfaces = 127.0.0.0/8 eth0

    # Only bind to the named interfaces and/or networks; you must use the
    # 'interfaces' option above to use this.
    # It is recommended that you enable this feature if your Samba machine is
    # not protected by a firewall or is a firewall itself.  However, this
    # option cannot handle dynamic or non-broadcast interfaces correctly.
    ;   bind interfaces only = yes



    #### Debugging/Accounting ####

    # This tells Samba to use a separate log file for each machine
    # that connects
       log file = /var/log/samba/log.%m

    # Cap the size of the individual log files (in KiB).
    #   max log size = 1000

    # If you want Samba to only log through syslog then set the following
    # parameter to 'yes'.
    #   syslog only = no

    # We want Samba to log a minimum amount of information to syslog. Everything
    # should go to /var/log/samba/log.{smbd,nmbd} instead. If you want to log
    # through syslog you should set the following parameter to something higher.
    #   syslog = 0

    # Do something sensible when Samba crashes: mail the admin a backtrace
       panic action = /usr/share/samba/panic-action %d


    ####### Authentication #######

    # "security = user" is always a good idea. This will require a Unix account
    # in this server for every user accessing the server. See
    # /usr/share/doc/samba-doc/htmldocs/Samba3-HOWTO/ServerType.html
    # in the samba-doc package for details.
    #   security = user

    # You may wish to use password encryption.  See the section on
    # 'encrypt passwords' in the smb.conf(5) manpage before enabling.
       encrypt passwords = true

    # If you are using encrypted passwords, Samba will need to know what
    # password database type you are using.
    #   passdb backend = tdbsam

    #   obey pam restrictions = yes

    # This boolean parameter controls whether Samba attempts to sync the Unix
    # password with the SMB password when the encrypted SMB password in the
    # passdb is changed.
    #   unix password sync = yes

    # For Unix password sync to work on a Debian GNU/Linux system, the following
    # parameters must be set (thanks to Ian Kahan <<kahan@informatik.tu-muenchen.de> for
    # sending the correct chat script for the passwd program in Debian Sarge).
    #   passwd program = /usr/bin/passwd %u
    #   passwd chat = *Enter\snew\s*\spassword:* %n\n *Retype\snew\s*\spassword:* %n\n *password\supdated\ssuccessfully* .

    # This boolean controls whether PAM will be used for password changes
    # when requested by an SMB client instead of the program listed in
    # 'passwd program'. The default is 'no'.
    #   pam password change = yes

    # This option controls how unsuccessful authentication attempts are mapped
    # to anonymous connections
    #   map to guest = bad user

    ########## Domains ###########

    # Is this machine able to authenticate users. Both PDC and BDC
    # must have this setting enabled. If you are the BDC you must
    # change the 'domain master' setting to no
    #
    ;   domain logons = yes
    #
    # The following setting only takes effect if 'domain logons' is set
    # It specifies the location of the user's profile directory
    # from the client point of view)
    # The following required a [profiles] share to be setup on the
    # samba server (see below)
    ;   logon path = \\%N\profiles\%U
    # Another common choice is storing the profile in the user's home directory
    # (this is Samba's default)
    #   logon path = \\%N\%U\profile

    # The following setting only takes effect if 'domain logons' is set
    # It specifies the location of a user's home directory (from the client
    # point of view)
    ;   logon drive = H:
    #   logon home = \\%N\%U

    # The following setting only takes effect if 'domain logons' is set
    # It specifies the script to run during logon. The script must be stored
    # in the [netlogon] share
    # NOTE: Must be store in 'DOS' file format convention
    ;   logon script = logon.cmd

    # This allows Unix users to be created on the domain controller via the SAMR
    # RPC pipe.  The example command creates a user account with a disabled Unix
    # password; please adapt to your needs
    ; add user script = /usr/sbin/adduser --quiet --disabled-password --gecos "" %u

    # This allows machine accounts to be created on the domain controller via the
    # SAMR RPC pipe.
    # The following assumes a "machines" group exists on the system
    ; add machine script  = /usr/sbin/useradd -g machines -c "%u machine account" -d /var/lib/samba -s /bin/false %u

    # This allows Unix groups to be created on the domain controller via the SAMR
    # RPC pipe.
    ; add group script = /usr/sbin/addgroup --force-badname %g

    ########## Printing ##########

    # If you want to automatically load your printer list rather
    # than setting them up individually then you'll need this
    #   load printers = yes

    # lpr(ng) printing. You may wish to override the location of the
    # printcap file
    ;   printing = bsd
    ;   printcap name = /etc/printcap

    # CUPS printing.  See also the cupsaddsmb(8) manpage in the
    # cupsys-client package.
    ;   printing = cups
    ;   printcap name = cups

    ############ Misc ############

    # Using the following line enables you to customise your configuration
    # on a per machine basis. The %m gets replaced with the netbios name
    # of the machine that is connecting
    ;   include = /home/samba/etc/smb.conf.%m

    # Most people will find that this option gives better performance.
    # See smb.conf(5) and /usr/share/doc/samba-doc/htmldocs/Samba3-HOWTO/speed.html
    # for details
    # You may want to add the following on a Linux system:
    #         SO_RCVBUF=8192 SO_SNDBUF=8192
    #   socket options = TCP_NODELAY

    # The following parameter is useful only if you have the linpopup package
    # installed. The samba maintainer and the linpopup maintainer are
    # working to ease installation and configuration of linpopup and samba.
    ;   message command = /bin/sh -c '/usr/bin/linpopup "%f" "%m" %s; rm %s' &

    # Domain Master specifies Samba to be the Domain Master Browser. If this
    # machine will be configured as a BDC (a secondary logon server), you
    # must set this to 'no'; otherwise, the default behavior is recommended.
    #   domain master = auto

    # Some defaults for winbind (make sure you're not using the ranges
    # for something else.)
    ;   idmap uid = 10000-20000
    ;   idmap gid = 10000-20000
    ;   template shell = /bin/bash

    # The following was the default behaviour in sarge,
    # but samba upstream reverted the default because it might induce
    # performance issues in large organizations.
    # See Debian bug #368251 for some of the consequences of *not*
    # having this setting and smb.conf(5) for details.
    ;   winbind enum groups = yes
    ;   winbind enum users = yes

    # Setup usershare options to enable non-root users to share folders
    # with the net usershare command.

    # Maximum number of usershare. 0 (default) means that usershare is disabled.
    ;   usershare max shares = 100

    # Allow users who've been granted usershare privileges to create
    # public shares, not just authenticated ones
    #   usershare allow guests = yes

    #======================= Share Definitions =======================

    # Un-comment the following (and tweak the other settings below to suit)
    # to enable the default home directory shares. This will share each
    # user's home director as \\server\username
    ;[homes]
    ;   comment = Home Directories
    ;   browseable = no

    # By default, the home directories are exported read-only. Change the
    # next parameter to 'no' if you want to be able to write to them.
    ;   read only = yes

    # File creation mask is set to 0700 for security reasons. If you want to
    # create files with group=rw permissions, set next parameter to 0775.
    ;   create mask = 0700

    # Directory creation mask is set to 0700 for security reasons. If you want to
    # create dirs. with group=rw permissions, set next parameter to 0775.
    ;   directory mask = 0700

    # By default, \\server\username shares can be connected to by anyone
    # with access to the samba server. Un-comment the following parameter
    # to make sure that only "username" can connect to \\server\username
    # The following parameter makes sure that only "username" can connect
    #
    # This might need tweaking when using external authentication schemes
    ;   valid users = %S

    # Un-comment the following and create the netlogon directory for Domain Logons
    # (you need to configure Samba to act as a domain controller too.)
    ;[netlogon]
    ;   comment = Network Logon Service
    ;   path = /home/samba/netlogon
    ;   guest ok = yes
    ;   read only = yes

    # Un-comment the following and create the profiles directory to store
    # users profiles (see the "logon path" option above)
    # (you need to configure Samba to act as a domain controller too.)
    # The path below should be writable by all users so that their
    # profile directory may be created the first time they log on
    ;[profiles]
    ;   comment = Users profiles
    ;   path = /home/samba/profiles
    ;   guest ok = no
    ;   browseable = no
    ;   create mask = 0600
    ;   directory mask = 0700

    [printers]
       comment = All Printers
       browseable = no
       path = /var/spool/samba
       printable = yes
       guest ok = no
       read only = yes
       create mask = 0700

    # Windows clients look for this share name as a source of downloadable
    # printer drivers
    [print$]
       comment = Printer Drivers
       path = /var/lib/samba/printers
       browseable = yes
       read only = yes
       guest ok = no
    # Uncomment to allow remote administration of Windows print drivers.
    # You may need to replace 'lpadmin' with the name of the group your
    # admin users are members of.
    # Please note that you also need to set appropriate Unix permissions
    # to the drivers directory for these users to have write rights in it
    ;   write list = root, @lpadmin

    # A sample share for sharing your CD-ROM with others.
    ;[cdrom]
    ;   comment = Samba server's CD-ROM
    ;   read only = yes
    ;   locking = no
    ;   path = /cdrom
    ;   guest ok = yes

    # The next two parameters show how to auto-mount a CD-ROM when the
    #       cdrom share is accesed. For this to work /etc/fstab must contain
    #       an entry like this:
    #
    #       /dev/scd0   /cdrom  iso9660 defaults,noauto,ro,user   0 0
    #
    # The CD-ROM gets unmounted automatically after the connection to the
    #
    # If you don't want to use auto-mounting/unmounting make sure the CD
    #       is mounted on /cdrom
    #
    ;   preexec = /bin/mount /cdrom
    ;   postexec = /bin/umount /cdrom


  #  [test] T


    #    comment = Data Directory
    #    path = /opt/data/ravi
    #    guest account = nodbody
    #    security = share
    #    browseable = Yes
    #    public = yes
    #    create mode = 555
    #    force create mode = 111
    #    force directory mode = 111
    #   inherit permissions = Yes
    #    create mask = 644
    #    directory mask = 644
    #    guest ok = Yes
    #   guest only = yes
    #   valid users = nobody
    #    writable = yes
    #    vfs objects = full_audit
    #   full_audit:prefix = %u|%I
    #   full_audit:success = open opendir
    #   full_audit:failure = all
    #   full_audit:facility = LOCAL7
    #   full_audit:priority = ALERT

    [data]
       comment = hyper's public area
       guest ok = yes
       locking = no
       writeable = yes
       path = /opt/data
       public = yes
       browseable = yes
       force user = nobody
  create mask = 0775
  directory mask = 0775