daily pastebin goal
26%
SHARE
TWEET

Untitled

a guest Nov 2nd, 2016 25 Never
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
  1. AT91Bootstrap 3.8.5 (Wed Nov  2 16:37:05 CET 2016)
  2.  
  3. All interrupts redirected to AIC
  4. NAND: ONFI flash detected
  5. NAND: Manufacturer ID: 0x2c Chip ID: 0x31
  6. NAND: Page Bytes: 0x800, Spare Bytes: 0x40
  7. NAND: ECC Correctability Bits: 0x4, ECC Sector Bytes: 0x200
  8. NAND: Disable On-Die ECC
  9. PMECC: version is: 0x0
  10. PMECC: page_size: 0x800, oob_size: 0x40, pmecc_cap: 0x4, sector_size: 0x200
  11. NAND: Initialize PMECC params, cap: 0x4, sector: 0x200
  12. NAND: Image: Copy 0x384538 bytes from 0x10000 to 0x22000000
  13. NAND: dt blob: Copy 0x742d bytes from 0x1000000 to 0x21000000
  14. try zImage magic: 0x16f2818 is found
  15.  
  16. Booting zImage ......
  17.  
  18. Using device tree in place at 0x21000000
  19.  
  20. Starting linux kernel ..., machid: 0xffffffff
  21.  
  22. [    0.000000] Booting Linux on physical CPU 0x0
  23. [    0.000000] Linux version 4.4.24-linux4sam_5.5 (rik@debian) (gcc version 4.9.4 (Buildroot 2016.08) ) #16 Wed Nov 2 16:26:06 CET 2016
  24. [    0.000000] CPU: ARMv7 Processor [410fc051] revision 1 (ARMv7), cr=10c53c7d
  25. [    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
  26. [    0.000000] Machine model: Atmel SAMA5D2 Xplained
  27. [    0.000000] cma: Reserved 64 MiB at 0x2c000000
  28. [    0.000000] Memory policy: Data cache writeback
  29. [    0.000000] CPU: All CPU(s) started in SVC mode.
  30. [    0.000000] Built 1 zonelists in Zone order, mobility grouping off.  Total pages: 65024
  31. [    0.000000] Kernel command line: console=ttyS0,115200 mtdparts=atmel_nand:32M(bootstrap/kernel)rw,-(rootfs) rw rootfstype=ubifs ubi.mtd=2 root=ubi0:rootfs mem=256M
  32. [    0.000000] PID hash table entries: 1024 (order: 0, 4096 bytes)
  33. [    0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
  34. [    0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
  35. [    0.000000] Memory: 186540K/262144K available (5159K kernel code, 184K rwdata, 1688K rodata, 212K init, 234K bss, 10068K reserved, 65536K cma-reserved)
  36. [    0.000000] Virtual kernel memory layout:
  37. [    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
  38. [    0.000000]     fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
  39. [    0.000000]     vmalloc : 0xd0800000 - 0xff800000   ( 752 MB)
  40. [    0.000000]     lowmem  : 0xc0000000 - 0xd0000000   ( 256 MB)
  41. [    0.000000]     modules : 0xbf000000 - 0xc0000000   (  16 MB)
  42. [    0.000000]       .text : 0xc0008000 - 0xc06b8050   (6849 kB)
  43. [    0.000000]       .init : 0xc06b9000 - 0xc06ee000   ( 212 kB)
  44. [    0.000000]       .data : 0xc06ee000 - 0xc071c1a8   ( 185 kB)
  45. [    0.000000]        .bss : 0xc071c1a8 - 0xc0756d78   ( 235 kB)
  46. [    0.000000] NR_IRQS:16 nr_irqs:16 16
  47. [    0.000000] L2C-310 ID prefetch enabled, offset 2 lines
  48. [    0.000000] L2C-310 dynamic clock gating enabled, standby mode enabled
  49. [    0.000000] L2C-310 cache controller enabled, 8 ways, 128 kB
  50. [    0.000000] L2C-310: CACHE_ID 0x410000c9, AUX_CTRL 0x36020000
  51. [    0.000000] clocksource: pit: mask: 0x7ffffff max_cycles: 0x7ffffff, max_idle_ns: 11513617062 ns
  52. [    0.000000] sched_clock: 32 bits at 100 Hz, resolution 10000000ns, wraps every 21474836475000000ns
  53. [    0.000000] Console: colour dummy device 80x30
  54. [    0.050000] Calibrating delay loop... 329.31 BogoMIPS (lpj=1646592)
  55. [    0.050000] pid_max: default: 32768 minimum: 301
  56. [    0.050000] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
  57. [    0.050000] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
  58. [    0.050000] CPU: Testing write buffer coherency: ok
  59. [    0.050000] Setting up static identity map for 0x20008200 - 0x20008258
  60. [    0.050000] devtmpfs: initialized
  61. [    0.070000] VFP support v0.3: implementor 41 architecture 2 part 30 variant 5 rev 1
  62. [    0.070000] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
  63. [    0.080000] pinctrl core: initialized pinctrl subsystem
  64. [    0.080000] NET: Registered protocol family 16
  65. [    0.110000] DMA: preallocated 256 KiB pool for atomic coherent allocations
  66. [    0.110000] cpuidle: using governor ladder
  67. [    0.110000] cpuidle: using governor menu
  68. [    0.110000] AT91: Detected SoC family: sama5d2
  69. [    0.110000] AT91: Detected SoC: sama5d27, revision 1
  70. [    0.130000] clocksource: tcb_clksrc: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 184217874325 ns
  71. [    0.180000] at_xdmac f0010000.dma-controller: 16 channels, mapped at 0xd081c000
  72. [    0.180000] SCSI subsystem initialized
  73. [    0.180000] usbcore: registered new interface driver usbfs
  74. [    0.180000] usbcore: registered new interface driver hub
  75. [    0.180000] usbcore: registered new device driver usb
  76. [    0.180000] at91_i2c f8028000.i2c: could not find pctldev for node /ahb/apb/pinctrl@fc038000/i2c0_default, deferring probe
  77. [    0.180000] media: Linux media interface: v0.10
  78. [    0.180000] Linux video capture interface: v2.00
  79. [    0.180000] Advanced Linux Sound Architecture Driver Initialized.
  80. [    0.190000] clocksource: Switched to clocksource tcb_clksrc
  81. [    0.230000] NET: Registered protocol family 2
  82. [    0.230000] TCP established hash table entries: 2048 (order: 1, 8192 bytes)
  83. [    0.240000] TCP bind hash table entries: 2048 (order: 1, 8192 bytes)
  84. [    0.240000] TCP: Hash tables configured (established 2048 bind 2048)
  85. [    0.240000] UDP hash table entries: 256 (order: 0, 4096 bytes)
  86. [    0.240000] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
  87. [    0.240000] NET: Registered protocol family 1
  88. [    0.240000] RPC: Registered named UNIX socket transport module.
  89. [    0.240000] RPC: Registered udp transport module.
  90. [    0.240000] RPC: Registered tcp transport module.
  91. [    0.240000] RPC: Registered tcp NFSv4.1 backchannel transport module.
  92. [    0.240000] futex hash table entries: 256 (order: -1, 3072 bytes)
  93. [    0.250000] io scheduler noop registered (default)
  94. [    0.260000] pinctrl-at91-pio4 fc038000.pinctrl: atmel pinctrl initialized
  95. [    0.260000] pinconfig core: failed to register map default (1): no configs given
  96. [    0.260000] f8020000.serial: ttyS0 at MMIO 0xf8020000 (irq = 38, base_baud = 5187500) is a ATMEL_SERIAL
  97. [    0.670000] console [ttyS0] enabled
  98. [    0.670000] f8024000.serial: ttyS1 at MMIO 0xf8024000 (irq = 39, base_baud = 5187500) is a ATMEL_SERIAL
  99. [    0.690000] fc008000.serial: ttyS2 at MMIO 0xfc008000 (irq = 45, base_baud = 5187500) is a ATMEL_SERIAL
  100. [    0.700000] [drm] Initialized drm 1.1.0 20060810
  101. [    0.720000] brd: module loaded
  102. [    0.740000] loop: module loaded
  103. [    0.750000] at91_i2c fc018600.i2c: can't get DMA channel, continue without DMA support
  104. [    0.750000] at91_i2c fc018600.i2c: Using FIFO (16 data)
  105. [    0.760000] at91_i2c fc018600.i2c: AT91 i2c bus driver (hw version: 0x704).
  106. [    0.770000] atmel_nand 80000000.nand: Using dma0chan0 for DMA transfers.
  107. [    0.780000] nand: device found, Manufacturer ID: 0x2c, Chip ID: 0xf1
  108. [    0.780000] nand: Micron MT29F1G08ABAEAWP
  109. [    0.790000] nand: 128 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64
  110. [    0.790000] atmel_nand 80000000.nand: minimum ECC: 4 bits in 512 bytes
  111. [    0.800000] atmel_nand 80000000.nand: Initialize PMECC params, cap: 4, sector: 512
  112. [    0.810000] Scanning device for bad blocks
  113. [    0.930000] mtd: bad character after partition (r)
  114. [    0.940000] 3 ofpart partitions found on MTD device atmel_nand
  115. [    0.940000] Creating 3 MTD partitions on "atmel_nand":
  116. [    0.950000] 0x000000000000-0x000000010000 : "bootstrap"
  117. [    0.950000] mtd: partition "bootstrap" doesn't end on an erase block -- force read-only
  118. [    0.970000] 0x000000010000-0x000001110000 : "kernel"
  119. [    0.970000] mtd: partition "kernel" doesn't start on an erase block boundary -- force read-only
  120. [    0.990000] 0x000002000000-0x000008000000 : "rootfs"
  121. [    1.000000] atmel_spi f8000000.spi: version: 0x311
  122. [    1.000000] atmel_spi f8000000.spi: Using dma0chan1 (tx) and dma0chan2 (rx) for DMA transfers
  123. [    1.010000] atmel_spi f8000000.spi: Using FIFO (16 data)
  124. [    1.020000] atmel_spi f8000000.spi: Atmel SPI Controller at 0xf8000000 (irq 31)
  125. [    1.030000] CAN device driver interface
  126. [    1.040000] m_can f8054000.can: m_can device registered (regs=d08a0000, irq=43)
  127. [    1.050000] m_can fc050000.can: m_can device registered (regs=d08b0000, irq=54)
  128. [    1.060000] macb f8008000.ethernet: invalid hw address, using random
  129. [    1.070000] libphy: MACB_mii_bus: probed
  130. [    1.150000] macb f8008000.ethernet eth0: Cadence GEM rev 0x00020203 at 0xf8008000 irq 32 (da:92:7e:97:d7:a7)
  131. [    1.160000] macb f8008000.ethernet eth0: attached PHY driver [Micrel KSZ8081 or KSZ8091] (mii_bus:phy_addr=f8008000.etherne:01, irq=129)
  132. [    1.170000] usbcore: registered new interface driver cdc_ether
  133. [    1.170000] usbcore: registered new interface driver cdc_subset
  134. [    1.180000] usbcore: registered new interface driver zaurus
  135. [    1.190000] usbcore: registered new interface driver cdc_ncm
  136. [    1.190000] usbcore: registered new interface driver huawei_cdc_ncm
  137. [    1.200000] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  138. [    1.200000] ehci-atmel: EHCI Atmel driver
  139. [    1.210000] atmel-ehci 500000.ehci: EHCI Host Controller
  140. [    1.220000] atmel-ehci 500000.ehci: new USB bus registered, assigned bus number 1
  141. [    1.230000] atmel-ehci 500000.ehci: irq 25, io mem 0x00500000
  142. [    1.250000] atmel-ehci 500000.ehci: USB 2.0 started, EHCI 1.00
  143. [    1.250000] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
  144. [    1.260000] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  145. [    1.270000] usb usb1: Product: EHCI Host Controller
  146. [    1.270000] usb usb1: Manufacturer: Linux 4.4.24-linux4sam_5.5 ehci_hcd
  147. [    1.280000] usb usb1: SerialNumber: 500000.ehci
  148. [    1.280000] hub 1-0:1.0: USB hub found
  149. [    1.290000] hub 1-0:1.0: 3 ports detected
  150. [    1.290000] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
  151. [    1.300000] ohci-atmel: OHCI Atmel driver
  152. [    1.300000] at91_ohci 400000.ohci: USB Host Controller
  153. [    1.310000] at91_ohci 400000.ohci: new USB bus registered, assigned bus number 2
  154. [    1.320000] at91_ohci 400000.ohci: irq 25, io mem 0x00400000
  155. [    1.380000] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
  156. [    1.390000] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  157. [    1.390000] usb usb2: Product: USB Host Controller
  158. [    1.400000] usb usb2: Manufacturer: Linux 4.4.24-linux4sam_5.5 ohci_hcd
  159. [    1.400000] usb usb2: SerialNumber: at91
  160. [    1.410000] hub 2-0:1.0: USB hub found
  161. [    1.420000] hub 2-0:1.0: 3 ports detected
  162. [    1.420000] usbcore: registered new interface driver cdc_acm
  163. [    1.430000] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
  164. [    1.430000] usbcore: registered new interface driver cdc_wdm
  165. [    1.440000] usbcore: registered new interface driver usb-storage
  166. [    1.450000] usbcore: registered new interface driver usbserial
  167. [    1.450000] usbcore: registered new interface driver usbserial_generic
  168. [    1.460000] usbserial: USB Serial support registered for generic
  169. [    1.470000] usbcore: registered new interface driver ftdi_sio
  170. [    1.470000] usbserial: USB Serial support registered for FTDI USB Serial Device
  171. [    1.480000] usbcore: registered new interface driver option
  172. [    1.480000] usbserial: USB Serial support registered for GSM modem (1-port)
  173. [    1.490000] usbcore: registered new interface driver pl2303
  174. [    1.500000] usbserial: USB Serial support registered for pl2303
  175. [    1.500000] rtc rtc0: alarm rollover not handled
  176. [    1.510000] rtc rtc0: invalid alarm value: 1900-1-1 0:0:0
  177. [    1.520000] at91_rtc f80480b0.rtc: rtc core: registered f80480b0.rtc as rtc0
  178. [    1.530000] at91_rtc f80480b0.rtc: AT91 Real Time Clock driver.
  179. [    1.530000] i2c /dev entries driver
  180. [    1.540000] AT91: Starting after wakeup
  181. [    1.550000] sama5d4_wdt f8048040.watchdog: initialized (timeout = 16 sec, nowayout = 0)
  182. [    1.550000] sdhci: Secure Digital Host Controller Interface driver
  183. [    1.560000] sdhci: Copyright(c) Pierre Ossman
  184. [    1.570000] sdhci-pltfm: SDHCI platform and OF driver helper
  185. [    1.570000] ledtrig-cpu: registered to indicate activity on CPUs
  186. [    1.580000] atmel_aes f002c000.aes: can't request region for resource [mem 0xf002c000-0xf002c0ff]
  187. [    1.590000] atmel_aes f002c000.aes: can't ioremap
  188. [    1.590000] atmel_aes f002c000.aes: initialization failed.
  189. [    1.600000] atmel_aes: probe of f002c000.aes failed with error -16
  190. [    1.610000] atmel_sha f0028000.sha: version: 0x510
  191. [    1.610000] atmel_sha f0028000.sha: using dma0chan3 for DMA transfers
  192. [    1.620000] atmel_sha f0028000.sha: Atmel SHA1/SHA256/SHA224/SHA384/SHA512
  193. [    1.630000] atmel_tdes fc044000.tdes: version: 0x703
  194. [    1.630000] atmel_tdes fc044000.tdes: using dma0chan4, dma0chan5 for DMA transfers
  195. [    1.640000] atmel_tdes fc044000.tdes: Atmel DES/TDES
  196. [    1.650000] usbcore: registered new interface driver usbhid
  197. [    1.650000] usbhid: USB HID core driver
  198. [    1.670000] atmel-classd fc048000.classd: PWM modulation type is Differential, non-overlapping is enabled
  199. [    1.680000] atmel-classd fc048000.classd: atmel-classd-hifi <-> fc048000.classd mapping ok
  200. [    1.690000] atmel-pdmic f8018000.pdmic: atmel-pdmic-hifi <-> f8018000.pdmic mapping ok
  201. [    1.700000] NET: Registered protocol family 17
  202. [    1.710000] can: controller area network core (rev 20120528 abi 9)
  203. [    1.710000] NET: Registered protocol family 29
  204. [    1.720000] can: raw protocol (rev 20120528)
  205. [    1.720000] can: broadcast manager protocol (rev 20120528 t)
  206. [    1.730000] can: netlink gateway (rev 20130117) max_hops=1
  207. [    1.740000] at91_i2c f8028000.i2c: can't get DMA channel, continue without DMA support
  208. [    1.750000] at91_i2c f8028000.i2c: AT91 i2c bus driver (hw version: 0x704).
  209. [    1.760000] ubi0: attaching mtd2
  210. [    2.000000] ubi0: scanning is finished
  211. [    2.020000] ubi0: attached mtd2 (name "rootfs", size 96 MiB)
  212. [    2.030000] ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
  213. [    2.030000] ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
  214. [    2.040000] ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096
  215. [    2.050000] ubi0: good PEBs: 768, bad PEBs: 0, corrupted PEBs: 0
  216. [    2.050000] ubi0: user volume: 1, internal volumes: 1, max. volumes count: 128
  217. [    2.060000] ubi0: max/mean erase counter: 1/0, WL threshold: 4096, image sequence number: 69304668
  218. [    2.070000] ubi0: available PEBs: 0, total reserved PEBs: 768, PEBs reserved for bad PEB handling: 20
  219. [    2.080000] at91_rtc f80480b0.rtc: setting system clock to 2012-01-01 00:04:51 UTC (1325376291)
  220. [    2.100000] ALSA device list:
  221. [    2.100000]   #0: CLASSD
  222. [    2.100000]   #1: PDMIC @ sama5d2_xplained
  223. [    2.110000] ubi0: background thread "ubi_bgt0d" started, PID 623
  224. [    2.110000] ubi0 warning: do_sync_erase: error -5 while erasing PEB 0, retry
  225. [    2.120000] ubi0 warning: do_sync_erase: error -5 while erasing PEB 0, retry
  226. [    2.130000] ubi0 warning: do_sync_erase: error -5 while erasing PEB 0, retry
  227. [    2.130000] ubi0 error: do_sync_erase: cannot erase PEB 0, error -5
  228. [    2.140000] CPU: 0 PID: 623 Comm: ubi_bgt0d Not tainted 4.4.24-linux4sam_5.5 #16
  229. [    2.150000] Hardware name: Atmel SAMA5
  230. [    2.150000] [<c00147e8>] (unwind_backtrace) from [<c0012610>] (show_stack+0x10/0x14)
  231. [    2.160000] [<c0012610>] (show_stack) from [<c02cca5c>] (do_sync_erase+0x1b4/0x2ac)
  232. [    2.170000] [<c02cca5c>] (do_sync_erase) from [<c02ccd00>] (ubi_io_sync_erase+0x1ac/0x2cc)
  233. [    2.170000] [<c02ccd00>] (ubi_io_sync_erase) from [<c02cd78c>] (__erase_worker+0xac/0x5ac)
  234. [    2.180000] [<c02cd78c>] (__erase_worker) from [<c02cdca0>] (erase_worker+0x14/0x64)
  235. [    2.190000] [<c02cdca0>] (erase_worker) from [<c02cd1b8>] (do_work+0x70/0xe8)
  236. [    2.200000] [<c02cd1b8>] (do_work) from [<c02cea1c>] (ubi_thread+0xf8/0x194)
  237. [    2.200000] [<c02cea1c>] (ubi_thread) from [<c00340fc>] (kthread+0xd4/0xec)
  238. [    2.210000] [<c00340fc>] (kthread) from [<c000f458>] (ret_from_fork+0x14/0x3c)
  239. [    2.220000] ubi0 error: __erase_worker: failed to erase PEB 0, error -5
  240. [    2.230000] ubi0: mark PEB 0 as bad
  241. [    2.730000] ubi0 error: ubi_io_mark_bad: cannot mark PEB 0 bad, error -30
  242. [    2.730000] ubi0 warning: ubi_ro_mode: switch to read-only mode
  243. [    2.740000] CPU: 0 PID: 623 Comm: ubi_bgt0d Not tainted 4.4.24-linux4sam_5.5 #16
  244. [    2.740000] Hardware name: Atmel SAMA5
  245. [    2.750000] [<c00147e8>] (unwind_backtrace) from [<c0012610>] (show_stack+0x10/0x14)
  246. [    2.760000] [<c0012610>] (show_stack) from [<c02cdadc>] (__erase_worker+0x3fc/0x5ac)
  247. [    2.760000] [<c02cdadc>] (__erase_worker) from [<c02cdca0>] (erase_worker+0x14/0x64)
  248. [    2.770000] [<c02cdca0>] (erase_worker) from [<c02cd1b8>] (do_work+0x70/0xe8)
  249. [    2.780000] [<c02cd1b8>] (do_work) from [<c02cea1c>] (ubi_thread+0xf8/0x194)
  250. [    2.790000] [<c02cea1c>] (ubi_thread) from [<c00340fc>] (kthread+0xd4/0xec)
  251. [    2.790000] [<c00340fc>] (kthread) from [<c000f458>] (ret_from_fork+0x14/0x3c)
  252. [    2.800000] ubi0 error: do_work: work failed with error code -30
  253. [    2.810000] ubi0 error: ubi_thread: ubi_bgt0d: work failed with error code -30
  254. [    2.810000] UBIFS (ubi0:0): read-only UBI device
  255. [    2.820000] UBIFS error (ubi0:0 pid 1): mount_ubifs: cannot mount read-write - read-only media
  256. [    2.830000] VFS: Cannot open root device "ubi0:rootfs" or unknown-block(0,0): error -30
  257. [    2.840000] Please append a correct "root=" boot option; here are the available partitions:
  258. [    2.840000] 0100            8192 ram0  (driver?)
  259. [    2.850000] 0101            8192 ram1  (driver?)
  260. [    2.850000] 0102            8192 ram2  (driver?)
  261. [    2.860000] 0103            8192 ram3  (driver?)
  262. [    2.860000] 1f00              64 mtdblock0  (driver?)
  263. [    2.870000] 1f01           17408 mtdblock1  (driver?)
  264. [    2.870000] 1f02           98304 mtdblock2  (driver?)
  265. [    2.880000] Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(0,0)
  266. [    2.880000] CPU: 0 PID: 1 Comm: swapper Not tainted 4.4.24-linux4sam_5.5 #16
  267. [    2.880000] Hardware name: Atmel SAMA5
  268. [    2.880000] [<c00147e8>] (unwind_backtrace) from [<c0012610>] (show_stack+0x10/0x14)
  269. [    2.880000] [<c0012610>] (show_stack) from [<c0063ff8>] (panic+0x88/0x1e4)
  270. [    2.880000] [<c0063ff8>] (panic) from [<c06ba174>] (mount_block_root+0x1c0/0x25c)
  271. [    2.880000] [<c06ba174>] (mount_block_root) from [<c06ba4c8>] (prepare_namespace+0xa8/0x1d8)
  272. [    2.880000] [<c06ba4c8>] (prepare_namespace) from [<c06b9e10>] (kernel_init_freeable+0x1c0/0x1d0)
  273. [    2.880000] [<c06b9e10>] (kernel_init_freeable) from [<c04e501c>] (kernel_init+0x8/0xe8)
  274. [    2.880000] [<c04e501c>] (kernel_init) from [<c000f458>] (ret_from_fork+0x14/0x3c)
  275. [    2.880000] ---[ end Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(0,0)
  276. [   73.700000] random: nonblocking pool is initialized
RAW Paste Data
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy. OK, I Understand
 
Top