Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- smartctl 5.41 2011-06-09 r3365 [i686-linux-3.4.0-10.dmz.1-liquorix-686] (local build)
- Copyright (C) 2002-11 by Bruce Allen, http://smartmontools.sourceforge.net
- === START OF INFORMATION SECTION ===
- Device Model: SAMSUNG SP1634N
- Serial Number: S0BKJ1NYC01801
- Firmware Version: UZ100-03
- User Capacity: 160,041,885,696 bytes [160 GB]
- Sector Size: 512 bytes logical/physical
- Device is: Not in smartctl database [for details use: -P showall]
- ATA Version is: 6
- ATA Standard is: ATA/ATAPI-6 T13 1410D revision 1
- Local Time is: Sun Sep 9 13:03:41 2012 CEST
- SMART support is: Available - device has SMART capability.
- SMART support is: Enabled
- === START OF READ SMART DATA SECTION ===
- SMART overall-health self-assessment test result: PASSED
- General SMART Values:
- Offline data collection status: (0x80) Offline data collection activity
- was never started.
- Auto Offline Data Collection: Enabled.
- Self-test execution status: ( 112) The previous self-test completed having
- the read element of the test failed.
- Total time to complete Offline
- data collection: ( 3960) seconds.
- Offline data collection
- capabilities: (0x5b) SMART execute Offline immediate.
- Auto Offline data collection on/off support.
- Suspend Offline collection upon new
- command.
- Offline surface scan supported.
- Self-test supported.
- No Conveyance Self-test supported.
- Selective Self-test supported.
- SMART capabilities: (0x0003) Saves SMART data before entering
- power-saving mode.
- Supports SMART auto save timer.
- Error logging capability: (0x01) Error logging supported.
- No General Purpose Logging support.
- Short self-test routine
- recommended polling time: ( 2) minutes.
- Extended self-test routine
- recommended polling time: ( 66) minutes.
- SMART Attributes Data Structure revision number: 17
- Vendor Specific SMART Attributes with Thresholds:
- ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
- 1 Raw_Read_Error_Rate 0x000f 099 099 051 Pre-fail Always - 2
- 3 Spin_Up_Time 0x0007 067 047 011 Pre-fail Always - 5000
- 4 Start_Stop_Count 0x0032 099 099 000 Old_age Always - 663
- 5 Reallocated_Sector_Ct 0x0033 099 099 011 Pre-fail Always - 3
- 7 Seek_Error_Rate 0x000f 252 252 051 Pre-fail Always - 0
- 8 Seek_Time_Performance 0x0025 252 252 015 Pre-fail Offline - 0
- 9 Power_On_Hours 0x0032 094 094 000 Old_age Always - 25404
- 10 Spin_Retry_Count 0x0033 252 252 051 Pre-fail Always - 0
- 11 Calibration_Retry_Count 0x0012 252 252 000 Old_age Always - 0
- 12 Power_Cycle_Count 0x0032 099 099 000 Old_age Always - 415
- 190 Airflow_Temperature_Cel 0x0022 121 085 000 Old_age Always - 44
- 194 Temperature_Celsius 0x0022 121 085 000 Old_age Always - 44
- 195 Hardware_ECC_Recovered 0x001a 100 100 000 Old_age Always - 0
- 196 Reallocated_Event_Count 0x0032 099 099 000 Old_age Always - 3
- 197 Current_Pending_Sector 0x0012 098 098 000 Old_age Always - 8
- 198 Offline_Uncorrectable 0x0030 252 252 000 Old_age Offline - 0
- 199 UDMA_CRC_Error_Count 0x003e 200 199 000 Old_age Always - 0
- 200 Multi_Zone_Error_Rate 0x000a 252 100 000 Old_age Always - 0
- 201 Soft_Read_Error_Rate 0x000a 099 099 000 Old_age Always - 1
- Warning! SMART ATA Error Log Structure error: invalid SMART checksum.
- SMART Error Log Version: 1
- ATA Error Count: 337 (device log contains only the most recent five errors)
- CR = Command Register [HEX]
- FR = Features Register [HEX]
- SC = Sector Count Register [HEX]
- SN = Sector Number Register [HEX]
- CL = Cylinder Low Register [HEX]
- CH = Cylinder High Register [HEX]
- DH = Device/Head Register [HEX]
- DC = Device Command Register [HEX]
- ER = Error register [HEX]
- ST = Status register [HEX]
- Powered_Up_Time is measured from power on, and printed as
- DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
- SS=sec, and sss=millisec. It "wraps" after 49.710 days.
- Error 337 occurred at disk power-on lifetime: 25396 hours (1058 days + 4 hours)
- When the command that caused the error occurred, the device was active or idle.
- After command completion occurred, registers were:
- ER ST SC SN CL CH DH
- -- -- -- -- -- -- --
- 04 51 00 01 4f c2 b0 Error: ABRT
- Commands leading to the command that caused the error were:
- CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
- -- -- -- -- -- -- -- -- ---------------- --------------------
- b0 d9 00 01 4f c2 b0 00 04:27:07.000 SMART DISABLE OPERATIONS
- ec 00 ff 01 00 00 b0 00 04:27:07.000 IDENTIFY DEVICE
- 10 00 ff 01 4f c2 b0 04 04:27:07.000 RECALIBRATE [OBS-4]
- 91 00 ff 01 4f c2 bf ff 04:27:07.000 INITIALIZE DEVICE PARAMETERS [OBS-6]
- ec 00 ff 01 00 00 b0 00 04:27:07.000 IDENTIFY DEVICE
- Error 336 occurred at disk power-on lifetime: 25396 hours (1058 days + 4 hours)
- When the command that caused the error occurred, the device was active or idle.
- After command completion occurred, registers were:
- ER ST SC SN CL CH DH
- -- -- -- -- -- -- --
- 40 51 00 c1 74 09 f0
- Commands leading to the command that caused the error were:
- CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
- -- -- -- -- -- -- -- -- ---------------- --------------------
- ec 00 00 00 00 00 b0 00 04:26:42.000 IDENTIFY DEVICE
- ef 03 45 00 00 00 b0 00 04:26:42.000 SET FEATURES [Set transfer mode]
- ec 00 00 00 00 00 b0 00 04:26:42.000 IDENTIFY DEVICE
- Error 335 occurred at disk power-on lifetime: 25396 hours (1058 days + 4 hours)
- When the command that caused the error occurred, the device was active or idle.
- After command completion occurred, registers were:
- ER ST SC SN CL CH DH
- -- -- -- -- -- -- --
- 40 51 00 c1 74 09 f0
- Commands leading to the command that caused the error were:
- CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
- -- -- -- -- -- -- -- -- ---------------- --------------------
- ec 00 00 00 00 00 b0 00 04:26:38.000 IDENTIFY DEVICE
- ef 03 45 00 00 00 b0 00 04:26:38.000 SET FEATURES [Set transfer mode]
- ec 00 00 00 00 00 b0 00 04:26:38.000 IDENTIFY DEVICE
- 00 00 00 c1 94 74 f0 04 04:26:38.000 NOP [Abort queued commands]
- Error 334 occurred at disk power-on lifetime: 25396 hours (1058 days + 4 hours)
- When the command that caused the error occurred, the device was active or idle.
- After command completion occurred, registers were:
- ER ST SC SN CL CH DH
- -- -- -- -- -- -- --
- 40 51 00 c1 74 09 f0
- Commands leading to the command that caused the error were:
- CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
- -- -- -- -- -- -- -- -- ---------------- --------------------
- ec 00 00 00 00 00 b0 00 04:26:07.000 IDENTIFY DEVICE
- ef 03 45 00 00 00 b0 00 04:26:07.000 SET FEATURES [Set transfer mode]
- ec 00 00 00 00 00 b0 00 04:26:07.000 IDENTIFY DEVICE
- Error 333 occurred at disk power-on lifetime: 25396 hours (1058 days + 4 hours)
- When the command that caused the error occurred, the device was active or idle.
- After command completion occurred, registers were:
- ER ST SC SN CL CH DH
- -- -- -- -- -- -- --
- 40 51 00 c1 74 09 f0
- Commands leading to the command that caused the error were:
- CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
- -- -- -- -- -- -- -- -- ---------------- --------------------
- ec 00 00 00 00 00 b0 00 04:26:04.000 IDENTIFY DEVICE
- ef 03 45 00 00 00 b0 00 04:26:04.000 SET FEATURES [Set transfer mode]
- ec 00 00 00 00 00 b0 00 04:26:04.000 IDENTIFY DEVICE
- SMART Self-test log structure revision number 0
- Warning: ATA Specification requires self-test log structure revision number = 1
- Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
- # 1 Extended offline Completed: read failure 00% 25398 149358666
- # 2 Extended offline Completed: read failure 00% 25397 149358666
- # 3 Short offline Completed: read failure 00% 25396 151622374
- # 4 Short offline Completed: read failure 00% 25163 151622374
- # 5 Short offline Completed: read failure 00% 25163 151622374
- # 6 Abort offline test Aborted by host 90% 25163 -
- # 7 Abort offline test Aborted by host 00% 24891 -
- # 8 Extended offline Completed without error 00% 22120 -
- # 9 Abort offline test Aborted by host 90% 22115 -
- Note: selective self-test log revision number (0) not 1 implies that no selective self-test has ever been run
- SMART Selective self-test log data structure revision number 0
- Note: revision number not 1 implies that no selective self-test has ever been run
- SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
- 1 545460846592 844424930131968 Not_testing
- 2 0 0 Not_testing
- 3 0 0 Not_testing
- 4 545460846592 281474976800656 Not_testing
- 5 604800 545460846596 Not_testing
- Selective self-test flags (0x0):
- After scanning selected spans, do NOT read-scan remainder of disk.
- If Selective self-test is pending on power-up, resume after 0 minute delay.
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement