*********************************************
*   U-Boot 1.1.4  (Jun 23 2015, 12:26:45)   *
*********************************************

AP121 (AR9331) U-Boot for DOMINO v1

DRAM:   64 MB DDR2 16-bit
FLASH:  Winbond W25Q128 (16 MB)
CLOCKS: 400/400/200/33 MHz (CPU/RAM/AHB/SPI)

** Warning: bad env CRC, using default,
   use 'saveenv' to save it in FLASH

LED on during eth initialization...

## Error: MDIO_BUSY!
## Error: MDIO_BUSY!
## Error: MDIO_BUSY!
## Error: MDIO_BUSY!
## Error: MDIO_BUSY!
## Error: MDIO_BUSY!
## Error: MDIO_BUSY!
## Error: MDIO_BUSY!
## Error: MDIO_BUSY!
## Error: MDIO_BUSY!
## Error: MDIO_BUSY!
## Error: MDIO_BUSY!
## Error: MDIO_BUSY!
## Error: MDIO_BUSY!
## Error: MDIO_BUSY!
## Error: MDIO_BUSY!
## Error: MDIO_BUSY!
## Error: MDIO_BUSY!
## Error: MDIO_BUSY!
## Error: MDIO_BUSY!
## Error: MDIO_BUSY!
## Error: MDIO_BUSY!
## Error: MDIO_BUSY!
## Error: MDIO_BUSY!
## Error: MDIO_BUSY!
## Error: MDIO_BUSY!
ag7240_mii_setup: MDC check failed
## Error: MDIO_BUSY!
## Error: MDIO_BUSY!
## Error: MDIO_BUSY!
## Error: MDIO_BUSY!
## Error: MDIO_BUSY!
## Error: MDIO_BUSY!
## Error: MDIO_BUSY!
## Error: MDIO_BUSY!
## Error: MDIO_BUSY!
## Error: MDIO_BUSY!
## Error: MDIO_BUSY!
## Error: MDIO_BUSY!
## Error: MDIO_BUSY!
## Error: MDIO_BUSY!
## Error: MDIO_BUSY!
## Error: MDIO_BUSY!
## Error: MDIO_BUSY!
## Error: MDIO_BUSY!
## Error: MDIO_BUSY!
## Error: MDIO_BUSY!
## Error: MDIO_BUSY!
## Error: MDIO_BUSY!
## Error: MDIO_BUSY!
## Error: MDIO_BUSY!
## Error: MDIO_BUSY!
## Error: MDIO_BUSY!
## Error: MDIO_BUSY!
## Error: MDIO_BUSY!
## Error: MDIO_BUSY!
## Error: MDIO_BUSY!
## Error: MDIO_BUSY!
## Error: MDIO_BUSY!
## Error: MDIO_BUSY!
## Error: MDIO_BUSY!
## Error: MDIO_BUSY!
## Error: MDIO_BUSY!
## Error: MDIO_BUSY!
## Error: MDIO_BUSY!
## Error: MDIO_BUSY!
## Error: MDIO_BUSY!
## Error: MDIO_BUSY!
## Error: MDIO_BUSY!
## Error: MDIO_BUSY!
## Error: MDIO_BUSY!
## Error: MDIO_BUSY!
## Error: MDIO_BUSY!
## Error: MDIO_BUSY!
## Error: MDIO_BUSY!
## Error: MDIO_BUSY!
## Error: MDIO_BUSY!
## Error: MDIO_BUSY!
## Error: MDIO_BUSY!
## Error: MDIO_BUSY!
## Error: MDIO_BUSY!
## Error: MDIO_BUSY!
## Error: MDIO_BUSY!
## Error: MDIO_BUSY!
## Error: MDIO_BUSY!
## Error: MDIO_BUSY!
## Error: MDIO_BUSY!
## Error: MDIO_BUSY!
## Error: MDIO_BUSY!
## Error: MDIO_BUSY!
## Error: MDIO_BUSY!
## Error: MDIO_BUSY!
## Error: MDIO_BUSY!
## Error: MDIO_BUSY!
## Error: MDIO_BUSY!
## Error: MDIO_BUSY!
## Error: MDIO_BUSY!
## Error: MDIO_BUSY!
## Error: MDIO_BUSY!
## Error: MDIO_BUSY!
## Error: MDIO_BUSY!
## Error: MDIO_BUSY!
## Error: MDIO_BUSY!
## Error: MDIO_BUSY!
## Error: MDIO_BUSY!
## Error: MDIO_BUSY!
## Error: MDIO_BUSY!
## Error: MDIO_BUSY!
## Error: MDIO_BUSY!
## Error: MDIO_BUSY!
## Error: MDIO_BUSY!
## Error: MDIO_BUSY!
## Error: MDIO_BUSY!
## Error: MDIO_BUSY!
## Error: MDIO_BUSY!
## Error: MDIO_BUSY!
## Error: MDIO_BUSY!
## Error: MDIO_BUSY!
## Error: MDIO_BUSY!
## Error: MDIO_BUSY!
## Error: MDIO_BUSY!
## Error: MDIO_BUSY!
## Error: MDIO_BUSY!
## Error: MDIO_BUSY!
## Error: MDIO_BUSY!
## Error: MDIO_BUSY!
## Error: MDIO_BUSY!
## Error: MDIO_BUSY!
## Error: MDIO_BUSY!
## Error: MDIO_BUSY!
## Error: MDIO_BUSY!
  _____     ____    __  __   _____   _   _    ____
 |  __ \   / __ \  |  \/  | |_   _| | \ | |  / __ \
 | |  | | | |  | | | \  / |   | |   |  \| | | |  | |
 | |  | | | |  | | | |\/| |   | |   | . ` | | |  | |
 | |__| | | |__| | | |  | |  _| |_  | |\  | | |__| |
 |_____/   \____/  |_|  |_| |_____| |_| \_|  \____/

Autobooting in: 2 s (type 'gl' to run U-Boot console)

Device calibrated. Booting ...
Booting image at: 0x9F050000

   Image name:   MIPS OpenWrt Linux-4.9.73
   Created:      2018-01-05  10:59:59 UTC
   Image type:   MIPS Linux Kernel Image (lzma compressed)
   Data size:    1500411 Bytes = 1.4 MB
   Load address: 0x80060000
   Entry point:  0x80060000

Uncompressing kernel image... OK!
Starting kernel...

[    0.000000] Linux version 4.9.73 (buildbot@builds) (gcc version 5.5.0 (OpenWrt GCC 5.5.0 r5677-da95c9a) ) #0 Thu Jan 4 12:44:42 2018
[    0.000000] bootconsole [early0] enabled
[    0.000000] CPU0 revision is: 00019374 (MIPS 24Kc)
[    0.000000] SoC: Atheros AR9330 rev 1
[    0.000000] Determined physical RAM map:
[    0.000000]  memory: 04000000 @ 00000000 (usable)
[    0.000000] Initrd not found or empty - disabling initrd
[    0.000000] OF: fdt:No valid device tree found, continuing without
[    0.000000] Primary instruction cache 64kB, VIPT, 4-way, linesize 32 bytes.
[    0.000000] Primary data cache 32kB, 4-way, VIPT, cache aliases, linesize 32 bytes
[    0.000000] Zone ranges:
[    0.000000]   Normal   [mem 0x0000000000000000-0x0000000003ffffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000000000-0x0000000003ffffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x0000000003ffffff]
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 16256
[    0.000000] Kernel command line:  board=DOMINO mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,16000k(firmware),64k(art)ro console=ttyATH0,115200 rootfstype=squashfd
[    0.000000] PID hash table entries: 256 (order: -2, 1024 bytes)
[    0.000000] Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)
[    0.000000] Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)
[    0.000000] Writing ErrCtl register=00000000
[    0.000000] Readback ErrCtl register=00000000
[    0.000000] Memory: 59440K/65536K available (3464K kernel code, 176K rwdata, 868K rodata, 348K init, 220K bss, 6096K reserved, 0K cma-reserved)
[    0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[    0.000000] NR_IRQS:51
[    0.000000] Clocks: CPU:400.000MHz, DDR:400.000MHz, AHB:200.000MHz, Ref:25.000MHz
[    0.000000] clocksource: MIPS: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 9556302233 ns
[    0.000013] sched_clock: 32 bits at 200MHz, resolution 5ns, wraps every 10737418237ns
[    0.007912] Calibrating delay loop... 265.42 BogoMIPS (lpj=1327104)
[    0.089124] pid_max: default: 32768 minimum: 301
[    0.093905] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.100341] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.111165] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[    0.119549] futex hash table entries: 256 (order: -1, 3072 bytes)
[    0.127421] NET: Registered protocol family 16
[    0.132595] MIPS: machine is Domino Pi
[    0.679089] clocksource: Switched to clocksource MIPS
[    0.684218] NET: Registered protocol family 2
[    0.688585] TCP established hash table entries: 1024 (order: 0, 4096 bytes)
[    0.694170] TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
[    0.700494] TCP: Hash tables configured (established 1024 bind 1024)
[    0.706926] UDP hash table entries: 256 (order: 0, 4096 bytes)
[    0.712657] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[    0.719231] NET: Registered protocol family 1
[    0.727958] Crashlog allocated RAM at address 0x3f00000
[    0.733102] workingset: timestamp_bits=30 max_order=14 bucket_order=0
[    0.749193] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.753565] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
[    0.775113] io scheduler noop registered
[    0.777577] io scheduler deadline registered (default)
[    0.783527] Serial: 8250/16550 driver, 16 ports, IRQ sharing enabled
[    0.793148] ar933x-uart: ttyATH0 at MMIO 0x18020000 (irq = 11, base_baud = 1562500) is a AR933X UART
[    0.801327] console [ttyATH0] enabled
[    0.801327] console [ttyATH0] enabled
[    0.808115] bootconsole [early0] disabled
[    0.808115] bootconsole [early0] disabled
[    0.823887] m25p80 spi0.0: found w25q128, expected m25p80
[    0.827855] m25p80 spi0.0: w25q128 (16384 Kbytes)
[    0.832652] 4 cmdlinepart partitions found on MTD device spi0.0
[    0.838430] Creating 4 MTD partitions on "spi0.0":
[    0.843232] 0x000000000000-0x000000040000 : "u-boot"
[    0.851010] 0x000000040000-0x000000050000 : "u-boot-env"
[    0.857134] 0x000000050000-0x000000ff0000 : "firmware"
[    0.878992] 2 uimage-fw partitions found on MTD device firmware
[    0.883531] 0x000000050000-0x0000001c0000 : "kernel"
[    0.890483] 0x0000001c0000-0x000000ff0000 : "rootfs"
[    0.896303] mtd: device 4 (rootfs) set to be root filesystem
[    0.900628] 1 squashfs-split partitions found on MTD device rootfs
[    0.906693] 0x0000003b0000-0x000000ff0000 : "rootfs_data"
[    0.914420] 0x000000ff0000-0x000001000000 : "art"
[    0.921507] libphy: Fixed MDIO Bus: probed
[    1.029113] libphy: ag71xx_mdio: probed
[    1.660377] ag71xx ag71xx.0: no PHY found with phy_mask=00000010
[    2.169076] random: fast init done
[    2.310745] ag71xx-mdio.1: unknown phy id 'ffff:ffff'
[    2.317086] NET: Registered protocol family 10
[    2.324705] NET: Registered protocol family 17
[    2.327769] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
[    2.340868] 8021q: 802.1Q VLAN Support v1.8
[    2.347088] hctosys: unable to open rtc device (rtc0)
[    2.357581] VFS: Mounted root (squashfs filesystem) readonly on device 31:4.
[    2.365946] Freeing unused kernel memory: 348K
[    2.368930] This architecture does not have kernel memory protection.
[    3.233371] init: Console is alive
[    3.235618] init: - watchdog -
[    4.430848] kmodloader: loading kernel modules from /etc/modules-boot.d/*
[    4.546850] usbcore: registered new interface driver usbfs
[    4.551112] usbcore: registered new interface driver hub
[    4.556304] usbcore: registered new device driver usb
[    4.568956] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    4.576476] ehci-platform: EHCI generic platform driver
[    4.580470] ehci-platform ehci-platform: EHCI Host Controller
[    4.586045] ehci-platform ehci-platform: new USB bus registered, assigned bus number 1
[    4.596060] ehci-platform ehci-platform: irq 3, io mem 0x1b000000
[    4.629143] ehci-platform ehci-platform: USB 2.0 started, EHCI 1.00
[    4.635253] hub 1-0:1.0: USB hub found
[    4.638104] hub 1-0:1.0: 1 port detected
[    4.642848] kmodloader: done loading kernel modules from /etc/modules-boot.d/*
[    4.659483] init: - preinit -
Press the [f] key and hit [enter] to enter failsafe mode
Press the [1], [2], [3] or [4] key and hit [enter] to select the debug level
[    8.957706] jffs2: notice: (380) jffs2_build_xattr_subsystem: complete building xattr subsystem, 0 of xdatum (0 unchecked, 0 orphan) and 0 of xref (0 dead, 0 orphan).
[    8.973666] mount_root: switching to jffs2 overlay
[    9.016156] urandom-seed: Seeding with /etc/urandom.seed
[    9.190711] procd: - early -
[    9.192264] procd: - watchdog -
[    9.881767] procd: - watchdog -
[    9.883831] procd: - ubus -
[   10.033026] procd: - init -
Please press Enter to activate this console.
[   10.502622] kmodloader: loading kernel modules from /etc/modules.d/*
[   10.514473] ip6_tables: (C) 2000-2006 Netfilter Core Team
[   10.534765] Loading modules backported from Linux version wt-2017-11-01-0-gfe248fc2c180
[   10.541402] Backport generated by backports.git v4.14-rc2-1-31-g86cf0e5d
[   10.552457] ip_tables: (C) 2000-2006 Netfilter Core Team
[   10.569285] nf_conntrack version 0.5.0 (1024 buckets, 4096 max)
[   10.656222] xt_time: kernel timezone is -0000
[   10.738997] PPP generic driver version 2.4.2
[   10.745624] NET: Registered protocol family 24
[   10.830917] ieee80211 phy0: Atheros AR9330 Rev:1 mem=0xb8100000, irq=2
[   10.874507] kmodloader: done loading kernel modules from /etc/modules.d/*
[   23.108688] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready