Guest User

dmesg

a guest
Aug 12th, 2019
84
Never
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
  1. dmesg
  2. [ 0.000000] Booting Linux on physical CPU 0
  3. [ 0.000000] Linux version 3.4.109 (tpassaro@tpassaro-imac) (gcc version 4.8.3 (GCC) ) #15 SMP Sun Jan 10 21:10:58 PST 2016
  4. [ 0.000000] CPU: ARMv7 Processor [413fc090] revision 0 (ARMv7), cr=10c5387d
  5. [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
  6. [ 0.000000] Machine: Meraki Wired-Arm-Nsp, model: Meraki MX65
  7. [ 0.000000] bootconsole [earlycon0] enabled
  8. [ 0.000000] Memory policy: ECC disabled, Data cache writealloc
  9. [ 0.000000] BUG: mapping for 0x18000000 at 0xff000000 out of vmalloc space
  10. [ 0.000000] BUG: mapping for 0x19000000 at 0xff200000 out of vmalloc space
  11. [ 0.000000] On node 0 totalpages: 524272
  12. [ 0.000000] free_area_init_node: node 0, pgdat 403c5100, node_mem_map 40407000
  13. [ 0.000000] Normal zone: 4096 pages used for memmap
  14. [ 0.000000] Normal zone: 0 pages reserved
  15. [ 0.000000] Normal zone: 520176 pages, LIFO batch:31
  16. [ 0.000000] smp_init_cpus: Enter ncores 2
  17. [ 0.000000] smp_init_cpus: Leave ncores 2
  18. [ 0.000000] PERCPU: Embedded 7 pages/cpu @423f0000 s5888 r8192 d14592 u32768
  19. [ 0.000000] pcpu-alloc: s5888 r8192 d14592 u32768 alloc=8*4096
  20. [ 0.000000] pcpu-alloc: [0] 0 [0] 1
  21. [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 520176
  22. [ 0.000000] Kernel command line: console=ttyS0,115200n8 ubi.mtd=ubi earlyprintk console=ttyS0,115200n8 earlyprintks
  23. [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
  24. [ 0.000000] Dentry cache hash table entries: 262144 (order: 8, 1048576 bytes)
  25. [ 0.000000] Inode-cache hash table entries: 131072 (order: 7, 524288 bytes)
  26. [ 0.000000] Memory: 2047MB = 2047MB total
  27. [ 0.000000] Memory: 2058660k/2058660k available, 38428k reserved, 0K highmem
  28. [ 0.000000] Virtual kernel memory layout:
  29. [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
  30. [ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
  31. [ 0.000000] vmalloc : 0xc0000000 - 0xff000000 (1008 MB)
  32. [ 0.000000] lowmem : 0x40000000 - 0xbfff0000 (2047 MB)
  33. [ 0.000000] modules : 0x3f000000 - 0x40000000 ( 16 MB)
  34. [ 0.000000] .text : 0x40008000 - 0x403704b8 (3490 kB)
  35. [ 0.000000] .init : 0x40371000 - 0x40396700 ( 150 kB)
  36. [ 0.000000] .data : 0x40398000 - 0x403c6368 ( 185 kB)
  37. [ 0.000000] .bss : 0x403c638c - 0x40406ad4 ( 258 kB)
  38. [ 0.000000] SLUB: Genslabs=11, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
  39. [ 0.000000] Hierarchical RCU implementation.
  40. [ 0.000000] NR_IRQS:292
  41. [ 0.000000] Clock Div = 0x12
  42. [ 0.000000] Active frequency ID 7
  43. [ 0.000000] a9pll0_status: clk 0x403b2aa4
  44. [ 0.000000] parent rate 25000000
  45. [ 0.000000] Clock divisor 2
  46. [ 0.000000] Clock rate 1200000011
  47. [ 0.000000] a9pll0_status: clk 0x403b2aa4
  48. [ 0.000000] parent rate 25000000
  49. [ 0.000000] Clock Div = 0x12
  50. [ 0.000000] Active frequency ID 7
  51. [ 0.000000] a9pll0_status: clk 0x403b2aa4
  52. [ 0.000000] parent rate 25000000
  53. [ 0.000000] Clock divisor 2
  54. [ 0.000000] Clock rate 1200000011
  55. [ 0.000000] Clock Div = 0x12
  56. [ 0.000000] Active frequency ID 7
  57. [ 0.000000] Clock divisor 2
  58. [ 0.000000] Clock rate 600000005
  59. [ 0.000000] a9pll0_status: clk 0x403b2aa4
  60. [ 0.000000] parent rate 25000000
  61. [ 0.000000] Clock Div = 0x12
  62. [ 0.000000] Active frequency ID 7
  63. [ 0.000000] a9pll0_status: clk 0x403b2aa4
  64. [ 0.000000] parent rate 25000000
  65. [ 0.000000] Clock divisor 2
  66. [ 0.000000] Clock rate 1200000011
  67. [ 0.000000] Clock Div = 0x12
  68. [ 0.000000] Active frequency ID 7
  69. [ 0.000000] Clock divisor 2
  70. [ 0.000000] Clock rate 600000005
  71. [ 0.000000] iproc_clocksource_init: CPU global timer freq 600000005
  72. [ 0.000000] cpu_clk_freq: 600000005
  73. [ 0.000000] HZ: 100, ticks_per_jiffy: 6000000
  74. [ 0.000000] sched_clock: 32 bits at 100 Hz, resolution 10000000ns, wraps every 4294967286ms
  75. [ 0.010000] Calibrating delay loop... 2387.14 BogoMIPS (lpj=11935744)
  76. [ 0.070000] pid_max: default: 32768 minimum: 301
  77. [ 0.070000] Mount-cache hash table entries: 512
  78. [ 0.080000] CPU: Testing write buffer coherency: ok
  79. [ 0.080000] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
  80. [ 0.090000] smp_twd: clock not found: -2
  81. [ 0.090000] Calibrating local timer... 600.02MHz.
  82. [ 0.160000] hw perfevents: enabled with ARMv7 Cortex-A9 PMU driver, 7 counters available
  83. [ 0.160000] Setting up static identity map for 0x6028b420 - 0x6028b478
  84. [ 0.170000] L310 cache controller enabled
  85. [ 0.170000] l2x0: 16 ways, CACHE_ID 0x410000c8, AUX_CTRL 0x0a150000, Cache size: 524288 B
  86. [ 0.180000] boot_secondary: Enter CPU1
  87. [ 0.180000] CPU1: Booted secondary processor
  88. [ 0.180000] platform_secondary_init: Enter cpu 1
  89. [ 0.180000] boot_secondary: Leave pen-release -1
  90. [ 0.180000] platform_secondary_init: Leave pen_release -1
  91. [ 0.340000] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
  92. [ 0.340000] Brought up 2 CPUs
  93. [ 0.340000] SMP: Total of 2 processors activated (4774.29 BogoMIPS).
  94. [ 0.350000] devtmpfs: initialized
  95. [ 0.360000] NET: Registered protocol family 16
  96. [ 0.360000] gpiochip_add: registered GPIOs 0 to 31 on device: GPIOA
  97. [ 0.370000] iproc gpiochip add GPIOA
  98. [ 0.370000] GPIOA:ioaddr ff000060
  99. [ 0.380000] GPIOA:intr_ioaddr ff000000 dmu_ioaddr ff020000
  100. [ 0.380000] gpiochip_add: registered GPIOs 32 to 35 on device: GPIOB
  101. [ 0.390000] iproc gpiochip add GPIOB
  102. [ 0.390000] GPIOB:ioaddr ff030000
  103. [ 0.400000] request_idm_timeout_interrupts: 600 entry
  104. [ 0.400000] idm_timeout_handler: 340, 0 entry
  105. [ 0.410000] idm_timeout_handler: 585 exit
  106. [ 0.410000] request_idm_timeout_interrupts: 696 exit
  107. [ 0.420000] hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers.
  108. [ 0.420000] hw-breakpoint: maximum watchpoint size is 4 bytes.
  109. [ 0.430000] bio: create slab <bio-0> at 0
  110. [ 0.440000] usbcore: registered new interface driver usbfs
  111. [ 0.440000] usbcore: registered new interface driver hub
  112. [ 0.450000] usbcore: registered new device driver usb
  113. [ 0.450000] i2c-gpio i2c-gpio.1: using pins 5 (SDA) and 4 (SCL)
  114. [ 0.460000] Switching to clocksource iproc_gtimer
  115. [ 0.470000] NET: Registered protocol family 2
  116. [ 0.480000] IP route cache hash table entries: 65536 (order: 6, 262144 bytes)
  117. [ 0.490000] TCP established hash table entries: 262144 (order: 9, 2097152 bytes)
  118. [ 0.500000] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
  119. [ 0.500000] TCP: Hash tables configured (established 262144 bind 65536)
  120. [ 0.510000] TCP: reno registered
  121. [ 0.510000] UDP hash table entries: 1024 (order: 3, 32768 bytes)
  122. [ 0.520000] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
  123. [ 0.530000] NET: Registered protocol family 1
  124. [ 0.530000] PCI: CLS 0 bytes, default 64
  125. [ 0.530000] Unpacking initramfs...
  126. [ 7.530000] Freeing initrd memory: 16244K
  127. [ 7.780000] PCIE0: LINKSTA reg 0xbe val 0x1001
  128. [ 7.790000] reg[0xac]=0x10, reg[0xae]=0x42, reg[0xb0]=0x8000, reg[0xb4]=0x2c10, reg[0xb6]=0x10, reg[0xb8]=0x5c12, reg[0xba]=0x65, reg[0xbe]=0x1001, reg[0xc6]=0x40, reg[0xca]=0x1, reg[0xd0]=0x1f, reg[0xd2]=0x8, reg[0xdc]=0x1, PCIE0 link=0
  129. [ 8.060000] PCIE1: LINKSTA reg 0xbe val 0x1001
  130. [ 8.060000] reg[0xac]=0x10, reg[0xae]=0x42, reg[0xb0]=0x8000, reg[0xb4]=0x2c10, reg[0xb6]=0x10, reg[0xb8]=0x5c12, reg[0xba]=0x65, reg[0xbe]=0x1001, reg[0xc6]=0x40, reg[0xca]=0x1, reg[0xd0]=0x1f, reg[0xd2]=0x8, reg[0xdc]=0x1, PCIE1 link=0
  131. [ 8.330000] PCIE2: LINKSTA reg 0xbe val 0x1001
  132. [ 8.340000] reg[0xac]=0x10, reg[0xae]=0x42, reg[0xb0]=0x8000, reg[0xb4]=0x2c10, reg[0xb6]=0x10, reg[0xb8]=0x5c12, reg[0xba]=0x65, reg[0xbe]=0x1001, reg[0xc6]=0x40, reg[0xca]=0x1, reg[0xd0]=0x1f, reg[0xd2]=0x8, reg[0xdc]=0x1, reg[0xde]=0x1, PCIE2 link=0
  133. [ 8.360000] pm_init: Initializing Power Management ....
  134. [ 8.450000] msgmni has been set to 4052
  135. [ 8.460000] io scheduler noop registered
  136. [ 8.460000] io scheduler deadline registered
  137. [ 8.470000] io scheduler cfq registered (default)
  138. [ 8.470000] iproc_pwmc_probe iobase ff031000 phys:18031000
  139. [ 8.480000] Serial: 8250/16550 driver, 1 ports, IRQ sharing disabled
  140. [ 8.490000] 18000300.uart: ttyS0 at MMIO 0x18000300 (irq = 117) is a 16550A
  141. [ 8.500000] console [ttyS0] enabled, bootconsole disabled
  142. [ 8.510000] at24 0-0050: 8192 byte 24c64 EEPROM, writable, 32 bytes/write
  143. [ 8.530000] ONFI param page 0 valid
  144. [ 8.530000] ONFI flash detected
  145. [ 8.530000] NAND device: Manufacturer ID: 0x2c, Chip ID: 0xd3 (Micron MT29F8G08ABACAWP)
  146. [ 8.540000] iproc_nand: heuristics exception detected, Micron MT29F8G08ABACA
  147. [ 8.550000] iproc_nand: following bootloader settings
  148. [ 8.550000] iproc_nand: 1024MiB total, 256KiB blocks, 4KiB pages, 27B OOB, 8-bit
  149. [ 8.560000] iproc_nand: user oob per page: 46 bytes (4 steps)
  150. [ 8.570000] Bad block table found at page 262080, version 0x01
  151. [ 8.580000] Bad block table found at page 262016, version 0x01
  152. [ 8.580000] Bad block table found at page 262080, version 0x01
  153. [ 8.590000] Bad block table found at page 262016, version 0x01
  154. [ 8.600000] Creating 6 MTD partitions on "nand_iproc.0":
  155. [ 8.600000] 0x000000000000-0x000000200000 : "U-boot"
  156. [ 8.610000] 0x000000100000-0x000000400000 : "bootkernel1"
  157. [ 8.620000] 0x000000400000-0x000000500000 : "senao_nvram"
  158. [ 8.630000] 0x000000500000-0x000000800000 : "bootkernel2"
  159. [ 8.640000] 0x000000800000-0x00003ff00000 : "ubi"
  160. [ 8.660000] 0x000000000000-0x00003ff00000 : "all"
  161. [ 8.670000] iproc_nand: NAND controller driver is loaded
  162. [ 8.680000] UBI: attaching mtd4 to ubi0
  163. [ 8.680000] UBI: physical eraseblock size: 262144 bytes (256 KiB)
  164. [ 8.690000] UBI: logical eraseblock size: 253952 bytes
  165. [ 8.700000] UBI: smallest flash I/O unit: 4096
  166. [ 8.700000] UBI: VID header offset: 4096 (aligned 4096)
  167. [ 8.710000] UBI: data offset: 8192
  168. [ 13.840000] UBI: max. sequence number: 7698
  169. [ 13.870000] UBI: attached mtd4 to ubi0
  170. [ 13.870000] UBI: MTD device name: "ubi"
  171. [ 13.880000] UBI: MTD device size: 1015 MiB
  172. [ 13.880000] UBI: number of good PEBs: 4060
  173. [ 13.890000] UBI: number of bad PEBs: 0
  174. [ 13.890000] UBI: number of corrupted PEBs: 0
  175. [ 13.890000] UBI: max. allowed volumes: 128
  176. [ 13.900000] UBI: wear-leveling threshold: 4096
  177. [ 13.900000] UBI: number of internal volumes: 1
  178. [ 13.910000] UBI: number of user volumes: 6
  179. [ 13.910000] UBI: available PEBs: 1568
  180. [ 13.920000] UBI: total number of reserved PEBs: 2492
  181. [ 13.920000] UBI: number of PEBs reserved for bad PEB handling: 40
  182. [ 13.930000] UBI: max/mean erase counter: 4/2
  183. [ 13.930000] UBI: image sequence number: 887924684
  184. [ 13.940000] UBI: background thread "ubi_bgt0d" started, PID 377
  185. [ 14.000000] tun: Universal TUN/TAP device driver, 1.6
  186. [ 14.000000] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
  187. [ 14.010000] bcm5301x_gmac_init_module: NAPI2_POLL mode
  188. [ 14.020000] bcm5301x_gmac_probe enter name:bcmiproc-gmac0; id:0x0; unit:0
  189. [ 14.030000] NVRAM: map 0x1e0a0000
  190. [ 14.050000] et0: eth1addr not found, ignore it
  191. [ 14.060000] bcm5301x_gmac_probe enter name:bcmiproc-gmac1; id:0x0; unit:1
  192. [ 14.070000] et1: eth2addr not found, ignore it
  193. [ 14.070000] bcm5301x_gmac_probe enter name:bcmiproc-gmac2; id:0x0; unit:2
  194. [ 14.080000] si_doattach chipid: 0x3f04cf1e
  195. [ 14.090000] et2: base_addr (0x18024000) irq (181)
  196. [ 14.090000] etc_gmac_speed default GMAC2 speed: auto
  197. [ 14.100000] etc_attach() mdio_init_time = 5
  198. [ 14.100000] si_doattach: incoming bus is PCI but it's a lie, switching to SI devid:0xcf1c
  199. [ 14.110000] si_doattach chipid: 0x3f04cf1e
  200. [ 14.110000] si_attach socitype(0x3) chip(0xcf1e) chiprev(0x4) chippkg(0x0)
  201. [ 14.120000] et2: chipattach: phyaddr(0x1e)
  202. [ 14.120000] et2: chipattach: Calling robo attach
  203. [ 14.130000] bcm_robo_attach: devid32: 0x10
  204. [ 14.200000] bcm_robo_enable_switch IPROC OTP is not configured, can not determine skuid
  205. [ 14.210000] bcm_robo_enable_switch Northstar Family chip
  206. [ 14.220000] eth0: Broadcom BCM5302x 10/100/1000 Mbps Ethernet Controller 6.30.40 (TOB) (r)
  207. [ 14.220000] eth_mac_proc_create: enter
  208. [ 14.230000]
  209. [ 14.230000] Creating fa bypass proc entry
  210. [ 14.230000] et_ctf_active enabled
  211. [ 14.240000] bcm5301x_gmac_probe enter name:bcmiproc-gmac3; id:0x0; unit:3
  212. [ 14.250000] et3: eth3addr not found, ignore it
  213. [ 14.250000] PPP generic driver version 2.4.2
  214. [ 14.260000] PPP BSD Compression module registered
  215. [ 14.260000] PPP Deflate Compression module registered
  216. [ 14.270000] NET: Registered protocol family 24
  217. [ 14.280000] usbcore: registered new interface driver cdc_ether
  218. [ 14.280000] usbcore: registered new interface driver cdc_eem
  219. [ 14.290000] usbcore: registered new interface driver cdc_subset
  220. [ 14.290000] usbcore: registered new interface driver sierra_net
  221. [ 14.300000] usbcore: registered new interface driver cdc_ncm
  222. [ 14.310000] Initial usb2h clock is: 000003fc
  223. [ 14.310000] Initial usb2h clock now is: 000003fd
  224. [ 14.310000] Initial usb2_reset_state is: 00000001
  225. [ 14.320000] usb2_reset_state is set and now it is: 00000000
  226. [ 14.330000] usbcore: registered new interface driver cdc_acm
  227. [ 14.330000] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
  228. [ 14.340000] usbcore: registered new interface driver usbserial
  229. [ 14.350000] usbserial: USB Serial Driver core
  230. [ 14.360000] usbcore: registered new interface driver option
  231. [ 14.360000] USB Serial support registered for GSM modem (1-port)
  232. [ 14.370000] usbcore: registered new interface driver qcserial
  233. [ 14.370000] USB Serial support registered for Qualcomm USB modem
  234. [ 14.380000] usbcore: registered new interface driver sierra
  235. [ 14.390000] USB Serial support registered for Sierra USB modem
  236. [ 14.390000] input: gpio-buttons.7 as /devices/gpio-buttons.7/input/input0
  237. [ 14.400000] i2c /dev entries driver
  238. [ 14.410000] GENPLL[5] mdiv=12 rate=1500000000
  239. [ 14.420000] GENPLL[5] mdiv=12 rate=1500000000
  240. [ 14.420000] sp805-wdt sp805-wdt: registration successful
  241. [ 14.430000] Registered led device: power:white
  242. [ 14.430000] Registered led device: port0:right
  243. [ 14.430000] Registered led device: port0:left
  244. [ 14.430000] Registered led device: port1:right
  245. [ 14.430000] Registered led device: port1:left
  246. [ 14.430000] Registered led device: power:orange
  247. [ 14.430000] Registered led device: tricolor0:red
  248. [ 14.440000] Registered led device: tricolor0:green
  249. [ 14.440000] Registered led device: tricolor0:blue
  250. [ 14.440000] usbcore: registered new interface driver usbhid
  251. [ 14.450000] usbhid: USB HID core driver
  252. [ 14.450000] meraki-config board-data.3: Meraki config device loaded
  253. [ 14.460000] TCP: cubic registered
  254. [ 14.460000] Initializing XFRM netlink socket
  255. [ 14.470000] NET: Registered protocol family 17
  256. [ 14.470000] NET: Registered protocol family 15
  257. [ 14.480000] L2TP core driver, V2.0
  258. [ 14.480000] PPPoL2TP kernel driver, V2.0
  259. [ 14.490000] 8021q: 802.1Q VLAN Support v1.8
  260. [ 14.490000] Registering SWP/SWPB emulation handler
  261. [ 14.500000] devtmpfs: mounted
  262. [ 14.500000] Freeing init memory: 148K
  263. [ 14.510000] Made it into bootsh: Jan 10 2016 19:11:18
  264. [ 14.520000] bootsh build T-189518M-g9b34fdcd-tpassaro
  265. [ 14.750000] UBIFS: mounted UBI device 0, volume 3, name "storage"
  266. [ 14.760000] UBIFS: file system size: 534061056 bytes (521544 KiB, 509 MiB, 2103 LEBs)
  267. [ 14.770000] UBIFS: journal size: 26664960 bytes (26040 KiB, 25 MiB, 105 LEBs)
  268. [ 14.770000] UBIFS: media format: w4/r0 (latest is w4/r0)
  269. [ 14.780000] UBIFS: default compressor: lzo
  270. [ 14.780000] UBIFS: reserved for root: 4952683 bytes (4836 KiB)
  271. [ 14.920000]
  272. init started: BusyBox v1.20.2 (2015-12-18 17:37:54 PST)
  273. [ 15.070000] sysctl: error: 'vm.extfrag_threshold' is an unknown key
  274. [ 15.400000] device eth0 entered promiscuous mode
  275. [ 15.760000] GENPLL[5] mdiv=12 rate=1500000000
  276. [ 15.760000] sysctl -w vm.panic_on_oom=2
  277. [ 15.770000] vm.panic_on_oom = 2
  278. [ 15.900000] click: starting router thread pid 903 (bf19f400)
  279. [ 15.960000] elts_meraki: module license 'unspecified' taints kernel.
  280. [ 16.150000] Single synchronous check for reset
  281. [ 16.150000]
  282. [ 16.150000] !!!!! {swctl} failed to swctl open_and_lock
  283. [ 16.250000] GobiNet: 2013-10-08/NTGR_2.21
  284. [ 16.260000] usbcore: registered new interface driver GobiNet
  285. [ 16.300000] usbcore: registered new interface driver GobiSerial
  286. [ 16.310000] USB Serial support registered for GobiSerial
  287. [ 16.320000] GobiSerial: 2013-10-08/NTGR_2.12:GobiSerial
  288. [ 16.400000] et2 Link Up: 0FD
  289. [ 16.410000] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  290. [ 16.410000] ehci_hcd: block sizes: qh 60 qtd 96 itd 160 sitd 96
  291. [ 16.410000] bcm-ehci bcm-ehci.0: bcm-ehci
  292. [ 16.420000] /home/tpassaro/co/router-alamo/linux-3.4/drivers/usb/core/inode.c: creating file 'devices'
  293. [ 16.420000] /home/tpassaro/co/router-alamo/linux-3.4/drivers/usb/core/inode.c: creating file '001'
  294. [ 16.420000] bcm-ehci bcm-ehci.0: new USB bus registered, assigned bus number 1
  295. [ 16.420000] bcm-ehci bcm-ehci.0: reset command 0080002 (park)=0 ithresh=8 period=1024 Reset HALT
  296. [ 16.420000] bcm-ehci bcm-ehci.0: irq 111, io mem 0xff02a000
  297. [ 16.430000] bcm-ehci bcm-ehci.0: init command 0010001 (park)=0 ithresh=1 period=1024 RUN
  298. [ 16.450000] bcm-ehci bcm-ehci.0: USB 2.0 started, EHCI 1.00
  299. [ 16.450000] usb usb1: default language 0x0409
  300. [ 16.450000] usb usb1: udev 1, busnum 1, minor = 0
  301. [ 16.450000] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
  302. [ 16.460000] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  303. [ 16.470000] usb usb1: Product: bcm-ehci
  304. [ 16.470000] usb usb1: Manufacturer: Linux 3.4.109 ehci_hcd
  305. [ 16.480000] usb usb1: SerialNumber: bcm-ehci
  306. [ 16.480000] usb usb1: usb_probe_device
  307. [ 16.480000] usb usb1: configuration #1 chosen from 1 choice
  308. [ 16.480000] usb usb1: adding 1-0:1.0 (config #1, interface 0)
  309. [ 16.490000] hub 1-0:1.0: usb_probe_interface
  310. [ 16.490000] hub 1-0:1.0: usb_probe_interface - got id
  311. [ 16.490000] hub 1-0:1.0: USB hub found
  312. [ 16.490000] hub 1-0:1.0: 2 ports detected
  313. [ 16.490000] hub 1-0:1.0: standalone hub
  314. [ 16.490000] hub 1-0:1.0: individual port power switching
  315. [ 16.490000] hub 1-0:1.0: individual port over-current protection
  316. [ 16.490000] hub 1-0:1.0: power on to power good time: 20ms
  317. [ 16.490000] hub 1-0:1.0: local power source is good
  318. [ 16.490000] hub 1-0:1.0: enabling power on all ports
  319. [ 16.500000] /home/tpassaro/co/router-alamo/linux-3.4/drivers/usb/core/inode.c: creating file '001'
  320. [ 16.500000] bcm-ehci bcm-ehci.0: probe done
  321. [ 16.530000] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
  322. [ 16.540000] ohci_hcd: block sizes: ed 64 td 64
  323. [ 16.540000] bcm-ohci bcm-ohci.0: bcm-ohci
  324. [ 16.540000] /home/tpassaro/co/router-alamo/linux-3.4/drivers/usb/core/inode.c: creating file '002'
  325. [ 16.540000] bcm-ohci bcm-ohci.0: new USB bus registered, assigned bus number 2
  326. [ 16.550000] bcm-ohci bcm-ohci.0: irq 111, io mem 0xff02b000
  327. [ 16.560000] bcm-ohci bcm-ohci.0: created debug files
  328. [ 16.590000] hub 1-0:1.0: state 7 ports 2 chg 0000 evt 0000
  329. [ 16.620000] bcm-ohci bcm-ohci.0: OHCI controller state
  330. [ 16.620000] bcm-ohci bcm-ohci.0: OHCI 1.0, NO legacy support registers, rh state running
  331. [ 16.620000] bcm-ohci bcm-ohci.0: control 0x083 HCFS=operational CBSR=3
  332. [ 16.620000] bcm-ohci bcm-ohci.0: cmdstatus 0x00000 SOC=0
  333. [ 16.620000] bcm-ohci bcm-ohci.0: intrstatus 0x00000004 SF
  334. [ 16.620000] bcm-ohci bcm-ohci.0: intrenable 0x8000005a MIE RHSC UE RD WDH
  335. [ 16.620000] bcm-ohci bcm-ohci.0: hcca frame #0005
  336. [ 16.620000] bcm-ohci bcm-ohci.0: roothub.a 02000202 POTPGT=2 NPS NDP=2(2)
  337. [ 16.620000] bcm-ohci bcm-ohci.0: roothub.b 00000000 PPCM=0000 DR=0000
  338. [ 16.620000] bcm-ohci bcm-ohci.0: roothub.status 00008000 DRWE
  339. [ 16.620000] bcm-ohci bcm-ohci.0: roothub.portstatus [0] 0x00000100 PPS
  340. [ 16.620000] bcm-ohci bcm-ohci.0: roothub.portstatus [1] 0x00000100 PPS
  341. [ 16.620000] usb usb2: default language 0x0409
  342. [ 16.620000] usb usb2: udev 1, busnum 2, minor = 128
  343. [ 16.620000] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
  344. [ 16.630000] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  345. [ 16.640000] usb usb2: Product: bcm-ohci
  346. [ 16.640000] usb usb2: Manufacturer: Linux 3.4.109 ohci_hcd
  347. [ 16.650000] usb usb2: SerialNumber: bcm-ohci
  348. [ 16.650000] usb usb2: usb_probe_device
  349. [ 16.650000] usb usb2: configuration #1 chosen from 1 choice
  350. [ 16.650000] usb usb2: adding 2-0:1.0 (config #1, interface 0)
  351. [ 16.660000] hub 2-0:1.0: usb_probe_interface
  352. [ 16.660000] hub 2-0:1.0: usb_probe_interface - got id
  353. [ 16.660000] hub 2-0:1.0: USB hub found
  354. [ 16.670000] hub 2-0:1.0: 2 ports detected
  355. [ 16.670000] hub 2-0:1.0: standalone hub
  356. [ 16.670000] hub 2-0:1.0: no power switching (usb 1.0)
  357. [ 16.670000] hub 2-0:1.0: global over-current protection
  358. [ 16.670000] hub 2-0:1.0: power on to power good time: 4ms
  359. [ 16.670000] hub 2-0:1.0: local power source is good
  360. [ 16.670000] hub 2-0:1.0: no over-current condition exists
  361. [ 16.670000] hub 2-0:1.0: trying to enable port power on non-switchable hub
  362. [ 16.670000] /home/tpassaro/co/router-alamo/linux-3.4/drivers/usb/core/inode.c: creating file '001'
  363. [ 16.670000] bcm-ohci bcm-ohci.0: probe done
  364. [ 16.740000] wl: module license 'Proprietary' taints kernel.
  365. [ 16.780000] hub 2-0:1.0: state 7 ports 2 chg 0000 evt 0000
  366. [ 17.010000]
  367. [ 17.020000] boot 20 build T-189518M-g9b34fdcd-tpassaro board wired-arm-nsp mac E0:55:3D:70:34:0E
  368. [ 17.030000] /usr/bin/snort-version
  369. [ 17.040000] Module: dummy .text=0x3f000000 .data=0x3f0003f4 .bss=
  370. [ 17.040000] Module: proclikefs .text=0x3f004000 .data= .bss=0x3f004b40
  371. [ 17.040000] Module: merakiclick .text=0x3f009000 .data=0x3f0f9bcc .bss=0x3f0f9e40
  372. [ 17.040000] Module: elts_meraki .text=0x3f1f2000 .data=0x3f43d3d0 .bss=0x3f43db38
  373. [ 17.040000] Module: GobiNet .text=0x3f5c2000 .data=0x3f5cb588 .bss=0x3f5cb7d8
  374. [ 17.040000] Module: GobiSerial .text=0x3f5d2000 .data=0x3f5d2e6c .bss=0x3f5d3338
  375. [ 17.040000] Module: bcmmdio .text=0x3f5d7000 .data=0x3f5d7370 .bss=0x3f5d75b8
  376. [ 17.040000] Module: ehci_hcd .text=0x3f5db000 .data=0x3f5e558c .bss=0x3f5e57e0
  377. [ 17.040000] Module: ohci_hcd .text=0x3f5ed000 .data=0x3f5f30e8 .bss=0x3f5f331c
  378. [ 17.040000] Module: wl .text=0x3f5fa000 .data=0x3f9255b8 .bss=0x3f9a6958
  379. [ 17.140000] phram: phram-oops device: 0x10000 at 0xdfff0000
  380. [ 17.240000] ramoops: platform device not found, using module parameters
  381. [ 20.520000] In write handler 'run' for 'ha_sync_init :: Script':
  382. [ 20.520000] While calling 'ha_sync_encrypt.keys ""':
  383. [ 20.530000] warning: key material 1 too short (minimum 16+4+20=40)
  384. [ 20.530000] While calling 'ha_sync_decrypt.keys ""':
  385. [ 20.540000] warning: key material 1 too short (minimum 16+4+20=40)
  386. [ 20.840000]
  387. [ 20.840000] !!!!! {/usr/bin/wired_brain} failed writing /proc/sys/net/ipv4/tcp_syncookies len 1 data: "0"
  388. [ 21.180000] chatter: bigacl load failed: checksum error (expected 1335b206e0eb8211b18460f4353bfb4743515456, actual: , buf size: 0)
RAW Paste Data