Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- [2019-11-21 10:22:15] [Output] : ⭐ Dion Winters walks towards the desk then notices the packages near it.
- [2019-11-21 10:22:33] [Output] : ⭐ Dion Winters extends right arm towards the injectors package then grabs it as he heads towards the evo.
- [2019-11-21 10:22:56] [Output] : ⭐ Dion Winters places the package on the roof of the car in a safe location then reaches for his pocket.
- [2019-11-21 10:23:16] [Output] : ⭐ Dion Winters would grab the evo x key then would twists it in the door lock to unlock it.
- [2019-11-21 10:23:32] [Output] : ⭐ Dion Winters would extends right arm towards the door bar then would opens the door as he slides hisself-
- [2019-11-21 10:23:54] [Output] : ⭐ -inside the car,then reaches for the hood releaser then releases the hood as he steps off- ((Dion Winters))
- [2019-11-21 10:24:59] [Output] : ⭐ -the car then heads towards the hood as he inserts right fingers under the hood- ((Dion Winters))
- [2019-11-21 10:25:16] [Output] : ⭐ -then pulls it open and stables it using the metal bar. ((Dion Winters))
- [2019-11-21 10:26:00] [Output] : ⭐ Engine bay would be visible now. ((Dion Winters))
- [2019-11-21 10:26:25] [Output] : ⭐ Dion Winters walks back towards the drive seat then reaches for the turnk releaser then presses it.
- [2019-11-21 10:26:42] [Output] : ⭐ the trunk sound should be heared now, Dion would make his way towards it. ((Dion Winters))
- [2019-11-21 10:27:04] [Output] : ⭐ Dion Winters gently pulls the trunk up then starts inspecting the empty trunk.
- [2019-11-21 10:27:11] [Output] : ⭐ 'there would be a black box'. ((Dion Winters))
- [2019-11-21 10:27:26] [Output] : ⭐ Dion Winters presses the two clips then removes the black cover, nowthe battery should be visible.
- [2019-11-21 10:27:57] [Output] : ⭐ Dion Winters gently and carefully removes the red connector, now the battery should be disconnected.
- [2019-11-21 10:28:22] [Output] : ⭐ Dion Would make his way towards the machanic tool kit then would wheels it towards- ((Dion Winters))
- [2019-11-21 10:29:36] [Output] : ⭐ -the hood, then would open the top shelf,then would grabs a 10mm socket and the impact gun. ((Dion Winters))
- [2019-11-21 10:30:11] [Output] : ⭐ Dion Winters leaves the impact gun on the tool kit then extends right arm towards the oil cap on the -
- [2019-11-21 10:30:38] [Output] : ⭐ -engine then would turn it to the left several times so that it should be removed. ((Dion Winters))
- [2019-11-21 10:31:04] [Output] : ⭐ Dion Winters would then places it in a safe location then would use both arms to remove the enginecover.
- [2019-11-21 10:31:25] [Output] : ⭐ Dion Winters then would reaches for a rag or a paper then places it on the oil cap to prevent anything -
- [2019-11-21 10:31:35] [Output] : ⭐ -from falling inside. ((Dion Winters))
- [2019-11-21 10:32:16] [Output] : ⭐ Dion Winters grabs the 10mm impact gun then places itonto one of the 2 10mmbolts holding the crossover -
- [2019-11-21 10:32:40] [Output] : ⭐ -tube to the fuel rail, then would start to unbolt them one by one. ((Dion Winters))
- [2019-11-21 10:33:04] [Output] : ⭐ Dion Winters would place the bolts in a safe location on the tool kit then would use the impact gun to -
- [2019-11-21 10:33:18] [Output] : ⭐ -loosen the bolt holding it to the manifold. ((Dion Winters))
- [2019-11-21 10:35:26] [Output] : ⭐ Dion Winters would remove the bolt then would places it on the mechanic tool kit.
- [2019-11-21 10:35:57] [Output] : ⭐ Dion Winters reaches for the pliers tool then uses it to loosen the hose clamp to unhook the breatherline
- [2019-11-21 10:36:08] [Output] : ⭐ -from the valve cover. ((Dion Winters))
- [2019-11-21 10:36:26] [Output] : ⭐ Dion Winters reaches for the 12mm socket then begins to install it onto the impact gun then places the gu
- [2019-11-21 10:36:50] [Output] : ⭐ -onto one of the 2 12mm bolts holding the fuel rail in place, then starts to loosen them. ((Dion Winters))
- [2019-11-21 10:37:15] [Output] : ⭐ Dion Winters would places the bolts in a safe location then carefully takes out the spacers and puts them
- [2019-11-21 10:37:52] [Output] : ⭐ -in safe location, now Dion should be able to disconnect the injector wiring from each fuel- ((Dion Winters))
- [2019-11-21 10:38:19] [Output] : ⭐ -injector by pressing down on the realease tab and gently pulling on the connector to remove ((Dion Winters))
- [2019-11-21 10:39:01] [Output] : ⭐ it from the injector. ((Dion Winters))
- [2019-11-21 10:39:31] [Output] : ⭐ now with the injectors unplugged, Dion pulls up softly on the rail andd carefully pulls the- ((Dion Winters))
- [2019-11-21 10:39:51] [Output] : ⭐ -injectors out one at a time. ((Dion Winters))
- [2019-11-21 10:40:11] [Output] : ⭐ Dion Winters walks towards the roof then grabs the injector package then opens it and grabs the 4 -
- [2019-11-21 10:40:43] [Output] : ⭐ -injectors as he heads back towards the hood, then begins to install them back into the rail ((Dion Winters))
- [2019-11-21 10:40:54] [Output] : ⭐ Dion Winters would make sure not to tear any of the orings.
- [2019-11-21 10:41:18] [Output] : ⭐ once all the injectors arein place, Dion carefully pushues the fuel rail down to seat the ((Dion Winters))
- [2019-11-21 10:41:39] [Output] : ⭐ -injectors in the manfild, then makes surethey're all in place properly. ((Dion Winters))
- [2019-11-21 10:42:06] [Output] : ⭐ Dion Winters attaches the injector adapter harnesses then plugs in all the injectors one by one.
- [2019-11-21 10:45:56] [Output] : ⭐ Dion Winters reaches for the 12mm bolts then grabs them as he starts to place them in place to hold the -
- [2019-11-21 10:46:21] [Output] : ⭐ -fuel railin place then uses the impact gun to tighten them at the very end then hooks the- ((Dion Winters))
- [2019-11-21 10:46:49] [Output] : ⭐ -breather line from the valve cover using pliers to tighten the hose clamp. ((Dion Winters))
- [2019-11-21 10:47:08] [Output] : ⭐ Dion Winters then reaches the 2 10mm bolts then starts placing them in place to hold the crossover-
- [2019-11-21 10:47:41] [Output] : ⭐ -tube to the fuel rail and the additional bolt holding it to the manifold,would tighten it- ((Dion Winters))
- [2019-11-21 10:47:49] [Output] : ⭐ -using the impact gun with 10mm socket. ((Dion Winters))
- [2019-11-21 10:48:41] [Output] : ⭐ Dion Winters would reach for the oil cap then would twist it in it location after removing the rag that-
- [2019-11-21 10:48:56] [Output] : ⭐ -covers the oil area. ((Dion Winters))
- [2019-11-21 10:49:07] [Output] : [English] Dion Winters says: Injectors done, let's start with the big boys now.
- [2019-11-21 11:20:49] [Output] : ⭐ Dion Winters walks towards the lift remote, 'there would be a dashboard there', presses the up button-
- [2019-11-21 11:21:28] [Output] : ⭐ -using right finger to fully lift the evo of the ground, then starts walking under it trying ((Dion Winters))
- [2019-11-21 11:21:49] [Output] : ⭐ -to locate the plastic engine corrpartment covers. ((Dion Winters))
- [2019-11-21 11:22:24] [Output] : ⭐ Dion Winters reaches for the plastic clips located in the mechanic tool kit then grabs them as he heads
- [2019-11-21 11:22:49] [Output] : ⭐ -towards the evo, then uses them to remove the plastic clips using prying tool. ((Dion Winters))
- [2019-11-21 11:25:44] [Output] : ⭐ Dion Winters would pop out the center section of the clip then pulls it out by hand.
- [2019-11-21 11:26:14] [Output] : ⭐ Dion Winters walks towards the passenger side front cover, then reaches for the 10mm impact gun-
- [2019-11-21 11:26:30] [Output] : ⭐ -then starts to loosen the 2bolts there one by one then removes the 5plastic clips using- ((Dion Winters))
- [2019-11-21 11:26:49] [Output] : ⭐ -pry tool one by one, making sure they are all removed. ((Dion Winters))
- [2019-11-21 11:27:57] [Output] : ⭐ Dion Winters would remove the passenger side front cover, then would locate the drain valve.
- [2019-11-21 11:30:18] [Output] : ⭐ Dion Winters reaches for a bucket lotaced in the bathroom then brings it as he places it under the drain*
- [2019-11-21 11:30:53] [Output] : [Notification] Axel is now online!
- [2019-11-21 11:31:05] [Output] : ⭐ -valve, then would use 10mm impact to loosen it, 'engine coolant should be filling the - ((Dion Winters))
- [2019-11-21 11:31:17] [Output] : ⭐ -bucket. ((Dion Winters))
- 2019-11-21 18:39:33] [Output] : ⭐ Dion Winters walks under the car then locates the oil location.
- [2019-11-21 18:39:48] [Output] : ⭐ Dion Winters reaches for the 10mm ratchet then grabs it then places it onto one of the 5bolts.
- [2019-11-21 18:41:01] [Output] : ⭐ Dion Winters removes the bolts one by one then places them in a safe location.
- [2019-11-21 18:41:18] [Output] : ⭐ Dion Winters reaches for the bucket then aligns it with the oil location.
- [2019-11-21 18:42:05] [Output] : ⭐ Dion Winters carefully unbolts the 10mm bolt, 'the oil should be filling the bucket now'.
- [2019-11-21 18:42:54] [Output] : ⭐ Dion Winters moves the bucket away then grabs the black cover then places it in place.
- [2019-11-21 18:43:13] [Output] : ⭐ Dion Winters places the 5bolts back to their position then tightens them using the 10mm bolt.
- [2019-11-21 18:43:35] [Output] : ⭐ would tighten the last bolt too, the one that lets the oil leaks. ((Dion Winters))
- [2019-11-21 11:31:46] [Output] : ⭐ Dion Winters makes his way towards the lift dashboard then presses the down button, as he then-
- [2019-11-21 11:32:04] [Output] : ⭐ -walks towards the hood. ((Dion Winters))
- [2019-11-21 11:32:22] [Output] : ⭐ 'there would be no engine cover because it was removed while replacing the injectors'. ((Dion Winters))
- [2019-11-21 11:32:56] [Output] : ⭐ Dion Winters removes the compressor outlet elbow hoses completely with adapter tube between them-
- [2019-11-21 11:33:41] [Output] : ⭐ -by removing the 2 hose clamps one by one using the screwdriver. ((Dion Winters))
- [2019-11-21 11:34:00] [Output] : ⭐ Dion Winters would removes the compressor inlet hose, completely with rubber elbow and the bypass valve-
- [2019-11-21 11:34:50] [Output] : ⭐ -by removing the, MAF sensor clamp, bypass valve clamp, bypass valve signal line clamp- ((Dion Winters))
- [2019-11-21 11:35:02] [Output] : ⭐ -then turbocharger inlet elbow clamp. ((Dion Winters))
- [2019-11-21 11:35:33] [Output] : ⭐ would try to do so using the philips screwdriver. ((Dion Winters))
- [2019-11-21 11:36:06] [Output] : ⭐ Dion Winters removes the strut tower brace bar using the 14mm impact gun to remove the 3nuts on each side
- [2019-11-21 11:36:35] [Output] : ⭐ -then would remove the cowl heat shielf located on the firewall behind the cylinder head- ((Dion Winters))
- [2019-11-21 11:36:59] [Output] : ⭐ - and under the cowl overhang by removing the 3bolts one by one using the 10mm socket. ((Dion Winters))
- [2019-11-21 11:38:03] [Output] : ⭐ Dion Winters removes the heat shield covering the exhaust mainfold and downpipe, by removing the 5bolts-
- [2019-11-21 11:38:11] [Output] : ⭐ -using 10mm socket. ((Dion Winters))
- [2019-11-21 11:39:22] [Output] : ⭐ Dion Winters removes the vaccum hose from the black metal compressor outlet elbow and from the wastegate-
- [2019-11-21 11:39:55] [Output] : ⭐ -actuator, by removing the 2hose clamps using the screwdriver. ((Dion Winters))
- [2019-11-21 11:40:27] [Output] : ⭐ Dion Winters removes the black metal compressor outlet elbow and its gasket, by removing the 2bolts using
- [2019-11-21 11:40:35] [Output] : ⭐ -12mm socket. ((Dion Winters))
- [2019-11-21 11:40:59] [Output] : ⭐ from the driver's side, reaches for the steel bracket then braces the compressor housing to- ((Dion Winters))
- [2019-11-21 11:41:20] [Output] : ⭐ -the engine block, then removes the bracket, by removing the 2 17mm bolts using the wrench. ((Dion Winters))
- [2019-11-21 11:42:02] [Output] : ⭐ Dion Winters removes the cast aluminum inlet elbow from the compressor housing, along with its gasket,-
- [2019-11-21 11:42:21] [Output] : ⭐ -would do so by removing the 3 12mm bolts using the 12mm wrench. ((Dion Winters))
- [2019-11-21 11:42:43] [Output] : ⭐ Dion Winters reaches for the hard steel water line that connects to the rear of the turbocharger's center
- [2019-11-21 11:43:08] [Output] : ⭐ -housing then removes it along with its banjo bolt, cooper crush washers, and mounting bolt- ((Dion Winters))
- [2019-11-21 11:43:47] [Output] : ⭐ Dion Winters would disconnect the rubber hose, by removing the 1 clamp and 1banjo bolt and the 10mm -
- [2019-11-21 11:43:59] [Output] : ⭐ -ratchet and 17mm ratchet. ((Dion Winters))
- [2019-11-21 11:44:18] [Output] : ⭐ Dion Winters locates the hard steel water line that connects to the front of the turbocharger's-
- [2019-11-21 11:44:37] [Output] : ⭐ -center housing, then removes the rubber hose that connects to the hard line- ((Dion Winters))
- [2019-11-21 11:45:08] [Output] : ⭐ -and makes sure to leave the hard line attached to the turbocharger. ((Dion Winters))
- [2019-11-21 11:45:44] [Output] : ⭐ Dion Winters from underneath the vehicle, removes the front exhaust pipe by removing the 2 bolts using 14
- [2019-11-21 11:46:13] [Output] : ⭐ -mm ratchet then removes the rear nuts using 19mm ratchet. ((Dion Winters))
- [2019-11-21 11:46:33] [Output] : ⭐ Dion Winters from underneath the vehicle, removes the black steel bracket that connects the turbine -
- [2019-11-21 11:46:58] [Output] : ⭐ -outlet elbow to the engine block using 14mm ratchet to remove the 2 bolts. ((Dion Winters))
- [2019-11-21 11:48:16] [Output] : ⭐ Dion Winters from underneath the vehicle, removes the heat shield attached to the top side of the t-
- [2019-11-21 11:48:48] [Output] : ⭐ -transfer case, behind and below the turbocharger, using 10mm ratchet to remove the 3bolts. ((Dion Winters))
- [2019-11-21 11:49:13] [Output] : ⭐ Dion Winters removes the heat shield above the passenger side inner drive shaft boot by removing the 2 bo
- [2019-11-21 11:49:26] [Output] : ⭐ -bolts of 10mm ratchet. ((Dion Winters))
- [2019-11-21 11:50:25] [Output] : ⭐ Dion Winters from above the turbocharger, locates the large heat shielf that covers the downpipe-
- [2019-11-21 11:50:52] [Output] : ⭐ -then removes the 3bolts to free both heat shields using 14mm ratchet. ((Dion Winters))
- [2019-11-21 11:51:23] [Output] : ⭐ Dion Winters removes the downpipe next, by removing the 4 bolts and the one nut securing it to the turbin
- [2019-11-21 11:51:50] [Output] : ⭐ e- housing, using 14mm socket to remove the 4bolts one by one. ((Dion Winters))
- [2019-11-21 11:52:12] [Output] : ⭐ Dion Winters reaches for the small steel bracket that connects the turbine housing to the engine block,-
- [2019-11-21 11:52:43] [Output] : ⭐ -then removes the bolt into the turbine housing, by removing the 1bolt using the 14mm ratche ((Dion Winters))
- [2019-11-21 11:53:30] [Output] : ⭐ t- then removes the oil feed line from the engine block, by removing the 2bolts using10mm - ((Dion Winters))
- [2019-11-21 11:53:38] [Output] : ⭐ -wrench. ((Dion Winters))
- [2019-11-21 11:54:38] [Output] : ⭐ Dion Winters locates the turbocharger oil drain line, then removes the single bolt securing clamp to -
- [2019-11-21 11:55:00] [Output] : ⭐ -engine block, then pulls oil drain line out of block but leaves it attached to the turbo- ((Dion Winters))
- [2019-11-21 11:55:09] [Output] : [NEWS] The lottery was drawn! Number: 68. Jackpot: $42,188
- [2019-11-21 11:55:10] [Output] : Payslip
- [2019-11-21 11:55:10] [Output] :
- [2019-11-21 11:55:10] [Output] : Bank Interest: $442 (˜2.03%)
- [2019-11-21 11:55:10] [Output] : Property Expenses: $21
- [2019-11-21 11:55:10] [Output] : Gross Income: $421
- [2019-11-21 11:55:10] [Output] : Remark(s): Transferred to your bank account.
- [2019-11-21 11:55:10] [Output] : Your employer did not pay you as you were off duty.
- [2019-11-21 11:55:49] [Output] : ⭐ Dion Winters ensures the rubber o-rings is present and did not break and fall into oil pan.
- [2019-11-21 11:56:06] [Output] : ⭐ Dion Winters from abovethe turbocharger, removesthe 2bolts and the 2nuts securing the turbine housing*
- [2019-11-21 11:57:03] [Output] : Trial Admin Jack Staton has teleported to you.
- [2019-11-21 11:57:07] [Output] : Jack Staton: (( oops ))
- [2019-11-21 11:57:32] [Output] : ⭐ -to the exhaust manifold. ((Dion Winters))
- [2019-11-21 11:58:16] [Output] : ⭐ Dion Winters removes the 10nuts and washers securing the exhaust manifold to cylinder head then removes-
- [2019-11-21 11:58:30] [Output] : ⭐ -exhaust manifold carefully as he places it onto the tool kit. ((Dion Winters))
- [2019-11-21 12:00:08] [Output] : ⭐ Dion Winters pulls the turbocharger up and out of the engine compartment from the top side-
- [2019-11-21 12:00:17] [Output] : ⭐ -then places it near the wall. ((Dion Winters))
- [2019-11-21 12:01:17] [Output] : ⭐ Dion Winters walks towards the new turbo package located in the desk room then grabs it as he heads-
- [2019-11-21 12:01:28] [Output] : ⭐ -back towards the hood then places it onto the ground. ((Dion Winters))
- [2019-11-21 18:47:17] [Output] : ⭐ Dion Winters walks towards the ets turbo kit package then opens it.
- [2019-11-21 18:47:48] [Output] : ⭐ Dion Winters reaches for the exhaust gasket and the exhaust manifold then grabs them.
- [2019-11-21 18:48:38] [Output] : ⭐ and the bolts too, then starts securing the gasket in place, then tighten the 10bolts one by ((Dion Winters))
- [2019-11-21 18:50:59] [Output] : ⭐ one, would reach for the turbo gasket then would place it onto the exhaust manifold- ((Dion Winters))
- [2019-11-21 18:51:25] [Output] : ⭐ -then tightens the 2 bolts using 14mm wrench one by one ((Dion Winters))
- [2019-11-21 18:57:26] [Output] : ⭐ Dion Winters places the wastegate in place then reaches for the clamp and the screwdriver then
- [2019-11-21 19:04:36] [Output] : ⭐ Dion Winters would begins to tighten the clamp.
- [2019-11-21 19:05:07] [Output] : ⭐ Dion Winters connects the lines to the turbo, then to the boost controler.
- [2019-11-21 12:03:42] [Output] : ⭐ Dion Winters would places back the oil feed line to the engine block using the banjo bolt.
- [2019-11-21 12:03:59] [Output] : [Notification] ikbenspy is now online!
- [2019-11-21 12:04:01] [Output] : ⭐ Dion Winters reaches for the small stell bracket that connects the turbine housing to the engine block-
- [2019-11-21 12:04:16] [Output] : ⭐ -then places the bolt into the turbine housing to places it back. ((Dion Winters))
- [2019-11-21 12:04:42] [Output] : ⭐ Dion Winters places the downpipe to it location using the 4bolts and the 1nut securing it to the turbine*
- [2019-11-21 12:05:22] [Output] : ⭐ -housing, then from above the turbocharger, grabs the large heat shield then begins- ((Dion Winters))
- [2019-11-21 12:05:36] [Output] : ⭐ -to secures it using the 3bolts and the 14mm ratchet. ((Dion Winters))
- [2019-11-21 12:06:01] [Output] : ⭐ Dion Winters places the heatshield back above the passenger side inner driveshaft boot using
- [2019-11-21 12:06:25] [Output] : ⭐ -2bolts and 10mm ratchet, then from underneath the vehicle places the heat shield back- ((Dion Winters))
- [2019-11-21 12:06:48] [Output] : ⭐ to attach to the top side of the transfer case, behind and below the turbocharger using ((Dion Winters))
- [2019-11-21 12:06:57] [Output] : ⭐ -3bolts and 10mm ratchet. ((Dion Winters))
- [2019-11-21 12:07:38] [Output] : ⭐ Dion Winters from underneath the vehicle places the lack steel bracket that connects the turbine outlet-
- [2019-11-21 12:08:40] [Output] : ⭐ Dion Winters from underneath the vehicle places the front exhaust pipe using the 2bolts and the 14mm
- [2019-11-21 12:09:04] [Output] : ⭐ -ratchet thenplaces the hard steel water line that connects to the rear of the turbocharger- ((Dion Winters))
- [2019-11-21 12:09:28] [Output] : ⭐ -center housing, along with is banjo bolt, copper crush washer, and mounting bolt. ((Dion Winters))
- [2019-11-21 12:09:54] [Output] : ⭐ Dion Winters places the cast aluminum inlet elbow from the compressor housing, along with its gasket usin
- [2019-11-21 12:10:30] [Output] : ⭐ -3bolts and 12mm ratchet, then from the driver's side, places the steel bracket that braces- ((Dion Winters))
- [2019-11-21 12:10:50] [Output] : ⭐ -the compressor housing to the engine block, then places the black metal compressor outlet- ((Dion Winters))
- [2019-11-21 12:11:13] [Output] : ⭐ -elbow and its gasket, using 2bolts and 12mm ratchet. ((Dion Winters))
- [2019-11-21 12:11:34] [Output] : ⭐ Dion Winters places the vaccum hose from the black metal compressor outlet elbow and from the waste
- [2019-11-21 12:12:11] [Output] : ⭐ -gate actuator using 2hose clamps then places the heat shield covering the exhaust- ((Dion Winters))
- [2019-11-21 12:12:24] [Output] : ⭐ -manifold and downpipe using the 5bolts and 10mm ratchet. ((Dion Winters))
- [2019-11-21 12:12:50] [Output] : ⭐ Dion Winters places the cowl heat shield back to the firewall behind the cylinder head and under the cowl
- [2019-11-21 12:13:09] [Output] : ⭐ -overhang using the 3bolts and the10mm ratchet. ((Dion Winters))
- [2019-11-21 12:13:28] [Output] : ⭐ Dion Winters would place the strut tower brace bar back to it place using the 3nuts on each side-
- [2019-11-21 12:13:54] [Output] : ⭐ -and the 14mm ratchet, then would connects the compressor inlet hose complete with rubber* ((Dion Winters))
- [2019-11-21 12:14:16] [Output] : ⭐ -elbow and bypass valve using the 4clamps of the maf sensor, bypass valve, bypass valve- ((Dion Winters))
- [2019-11-21 12:14:44] [Output] : ⭐ -signal line and turbocharger inlet elbow clamp then would places the compressor outlet elbo ((Dion Winters))
- [2019-11-21 12:15:14] [Output] : ⭐ -elbow hoses complete with the adapter tube between them by placing the2hose clamps. ((Dion Winters))
- [2019-11-21 12:15:28] [Output] : ⭐ Dion Winters sighs heavily.
- [2019-11-21 12:15:31] [Output] : [English] Dion Winters says: Damn budd.
- [2019-11-21 12:15:35] [Output] : [English] Dion Winters says: Looks dope.
- [2019-11-21 12:15:43] [Output] : [English] Dion Winters says: Still needs the intercooler fuck i forgot.
- [2019-11-21 12:15:58] [Output] : ⭐ Dion Winters reaches down to his radio, grabbing it as he pushes the "PTT" button, speaking into it.
- [2019-11-21 12:17:27] [Output] : ⭐ Dion Winters works towards the right vehicle fender wells then removes the 3push type-
- [2019-11-21 12:17:51] [Output] : ⭐ retainers and the one m6 bolt from both front fenders wells. ((Dion Winters))
- [2019-11-21 12:18:23] [Output] : ⭐ Dion Winters leans under the car then removes the 18push type retainers one by one from lower valence -
- [2019-11-21 12:18:52] [Output] : ⭐ -panel then stands up then heads towards the hood and removes the cold air intake and upper ((Dion Winters))
- [2019-11-21 12:19:13] [Output] : ⭐ -valance panel by removing the 4 m6 bolts and one push retainer from the front end. ((Dion Winters))
- [2019-11-21 12:19:32] [Output] : ⭐ Dion Winters unsaps front end from fender on both sides, then disconnects lighting harness and removes -
- [2019-11-21 12:19:56] [Output] : ⭐ -front end, then loosen clamps holding factory couplers to factory I/C inlet and outlet port ((Dion Winters))
- [2019-11-21 12:20:23] [Output] : ⭐ Dion Winters removes the 2 m8 bolts from bottom of factory I/C mounts then removes the 4 M8 bolts holding
- [2019-11-21 12:20:39] [Output] : ⭐ -left and right factory i/C mounts to bumper support. ((Dion Winters))
- [2019-11-21 12:21:06] [Output] : ⭐ Dion Winters removes the 1 M8 bolt holding factory I/C pipe to core support on driver's side.
- [2019-11-21 12:21:27] [Output] : ⭐ Dion Winters removes factory I/C and removes mounts with grommets from factory.
- [2019-11-21 12:21:53] [Output] : ⭐ Dion Winters removes the 1 M6 bolt from hood latch bracket then removes threaded dowel and the 2 grommets
- [2019-11-21 12:22:04] [Output] : ⭐ -and spacers from factory I/C. ((Dion Winters))
- [2019-11-21 12:22:40] [Output] : ⭐ Dion Winters installs dowel, grommets and spacers onto the new I/C then slips the factory I/C side mounts
- [2019-11-21 12:23:10] [Output] : ⭐ -and grommets onto the new I/C. ((Dion Winters))
- [2019-11-21 12:23:33] [Output] : ⭐ Dion Winters mounts the new I/C to bumper support loosely with 4 facotry M8 bolts and loosely conencts-
- [2019-11-21 12:23:53] [Output] : ⭐ -factory couplers and clamps, then slides top I/C mount grommet and spacer so it slips- ((Dion Winters))
- [2019-11-21 12:24:21] [Output] : ⭐ -over factory nut on back side of the hood latch, support thread m6 bolt and m6 washer*t ((Dion Winters))
- [2019-11-21 12:24:36] [Output] : [Notification] Axel has gone offline!
- [2019-11-21 12:24:42] [Output] : ⭐ -trough hood latch bracket and I/C grommet spacer and bracket, then secures loosely with- ((Dion Winters))
- [2019-11-21 12:24:52] [Output] : ⭐ - 32mm OD M6 washer and nut. ((Dion Winters))
- [2019-11-21 12:26:44] [Output] : ⭐ Dion Winters grabs the new intercooler as he starts placing it in place then places the 1 M6 bolt holding
- [2019-11-21 12:26:52] [Output] : ⭐ -factory I/C pipe to core support on driver's side. ((Dion Winters))
- [2019-11-21 12:27:24] [Output] : ⭐ Dion Winters then places the 4 M8 bolts left & right factory I/C mounts to bumper support, then places
- [2019-11-21 12:27:44] [Output] : ⭐ -the m8 bolts from bottom of factory I/C mounts then tighten the clamps holding factory - ((Dion Winters))
- [2019-11-21 12:28:05] [Output] : ⭐ -couplers to factory I/C inlet and outlet ports. ((Dion Winters))
- [2019-11-21 12:28:31] [Output] : ⭐ Dion Winters snaps the front end fender on both sides then connects the lighting harness and places the-
- [2019-11-21 12:28:53] [Output] : ⭐ -front end then places the 4 M6 bolts and onepush type retainer from front end. ((Dion Winters))
- [2019-11-21 12:29:14] [Output] : ⭐ Dion Winters places the cold air intake then and upper valance panel then places the 18push type retainer
- [2019-11-21 12:29:57] [Output] : ⭐ Dion Winters walks back towards the turnk then located the red connector then conencts it the the battery
- [2019-11-21 12:30:10] [Output] : ⭐ -then slides the baterry cover to it original location. ((Dion Winters))
- [2019-11-21 22:49:27] [Output] : ⭐ Dion Winters heads towards the mechanic tool kit then reaches for a 17mm hex socket and a ratchet-
- [2019-11-21 22:49:38] [Output] : ⭐ -then grabs them towards the rear doors. ((Dion Winters))
- [2019-11-21 22:50:05] [Output] : ⭐ Dion Winters extends right arm towards his pocket then grabs the door key then twists it in the door luck
- [2019-11-21 22:50:24] [Output] : [Notification] Kentwolfy has gone offline!
- [2019-11-21 22:50:35] [Output] : ⭐ -then opens the door as he gets inside the car then places the socket onto the ratchet then- ((Dion Winters))
- [2019-11-21 22:51:02] [Output] : ⭐ -places the ratchet onto one of the 3 14mm hex bolts then starts to loosen them one by one. ((Dion Winters))
- [2019-11-21 22:51:22] [Output] : ⭐ as he then places them in a small case then places the ratchet down. ((Dion Winters))
- [2019-11-21 22:52:51] [Output] : ⭐ Dion Winters extends right arm towards the 3 clips that holdes bottom seats down, then pulls them off.
- [2019-11-21 22:53:19] [Output] : ⭐ Dion Winters starts pulling away on each side, 'the rearseats should be removed then'.
- [2019-11-21 22:53:46] [Output] : ⭐ doing so will clear the hooks that holdes the rear seats in place. ((Dion Winters))
- [2019-11-21 22:54:15] [Output] : ⭐ the fuel pump location should be visible but covered with an aluminum cover. ((Dion Winters))
- [2019-11-21 22:54:50] [Output] : ⭐ Dion Winters steps off the car then walks towards the mechanic tool kit then reaches for a flat screwdriv
- [2019-11-21 22:55:25] [Output] : [NEWS] The lottery was drawn! Number: 17. Jackpot: $43,236
- [2019-11-21 22:55:27] [Output] : Payslip
- [2019-11-21 22:55:27] [Output] :
- [2019-11-21 22:55:27] [Output] : Bank Interest: $473 (≈1.90%)
- [2019-11-21 22:55:27] [Output] : Property Expenses: $21
- [2019-11-21 22:55:27] [Output] : Gross Income: $452
- [2019-11-21 22:55:27] [Output] : Remark(s): Transferred to your bank account.
- [2019-11-21 22:55:27] [Output] : Your employer did not pay you as you were off duty.
- [2019-11-21 22:56:07] [Output] : ⭐ Dion Winters grabs the screwdriver then heads back towards the rearseats.
- [2019-11-21 22:56:29] [Output] : ⭐ Dion Winters would places the rear seats in a safe location first then would places the screwdriver-
- [2019-11-21 22:58:06] [Output] : ⭐ between the cover and the car body then would try to push it upwards to release the cover. ((Dion Winters))
- [2019-11-21 22:58:17] [Output] : ⭐ the fuel pump should be visible now. ((Dion Winters))
- [2019-11-21 22:59:00] [Output] : ⭐ Dion Winters extends right arm towards the electrical loop clip then disconnects it then carefully pulls-
- [2019-11-21 22:59:50] [Output] : ⭐ -upwards around the perimter of the panel. ((Dion Winters))
- [2019-11-21 23:00:22] [Output] : ⭐ Dion Winters would squeeze the tab then unplgus the gray wiring conector on the top of the pump housing.
- [2019-11-21 23:00:46] [Output] : [English] Dion Winters says: We should disconnect the battery ma man.
- [2019-11-21 23:01:01] [Output] : ⭐ Dion Winters steps off the car then heads towards the trunk where the battery is located.
- [2019-11-21 23:01:30] [Output] : ⭐ Dion Winters removes the black cover by pusshing the pushe types, then carefully unplugs the red cable.
- [2019-11-21 23:02:05] [Output] : ⭐ with a 10mm socket wrench. ((Dion Winters))
- [2019-11-21 23:02:59] [Output] : ⭐ Dion Winters grabs the flat screwdriver then heads back as he starts to dislodge the green plastic
- [2019-11-21 23:03:29] [Output] : ⭐ -retaining clip upwards, then pulls theconnector away from the fitting. ((Dion Winters))
- [2019-11-21 23:03:58] [Output] : ⭐ Dion Winters reaches for a rag then cleans up the spilled fuel, then loosen the hose clamp on the return-
- [2019-11-21 23:04:17] [Output] : ⭐ -hose and remove it from the housings's barb fitting. ((Dion Winters))
- [2019-11-21 23:04:48] [Output] : ⭐ Dion Winters spreads the two retaining tabs outwards and pulls upwards then releases the OEM fuel
- [2019-11-21 23:05:07] [Output] : ⭐ -pressure sensor. ((Dion Winters))
- [2019-11-21 23:05:43] [Output] : ⭐ Dion Winters reaches for the 8mm wrench then loosen the 6 m5 nuts holding the retaining ring, then holds-
- [2019-11-21 23:06:27] [Output] : ⭐ -the fuel pump housing down with one hand and removes each nut one by one by hand- ((Dion Winters))
- [2019-11-21 23:06:38] [Output] : ⭐ -as the housing is slightly spring loaded. ((Dion Winters))
- [2019-11-21 23:06:58] [Output] : ⭐ Dion Winters then removes the black steal retaining ring and sets aside as it will be reused.
- [2019-11-21 23:07:29] [Output] : ⭐ Dion Winters tils the fuel pump housing towards the right side of the vehicle then pull up .
- [2019-11-21 23:07:54] [Output] : ⭐ Dion Winters using pliers releases the crossover hose then pulls the OEM fuel pump housing out and drain-
- [2019-11-21 23:08:01] [Output] : ⭐ -it ito a bucket. ((Dion Winters))
- [2019-11-21 23:08:17] [Output] : ⭐ Dion Winters removes the large rubber gasket from te oem fuel pump housing.
- [2019-11-21 23:08:32] [Output] : ⭐ Dion Winters cleans the fuel pump housing and sets it onto the workbench.
- [2019-11-21 23:08:54] [Output] : ⭐ Dion Winters removes the fuel and fuel temperature sensors from the oem fuel pump housing-
- [2019-11-21 23:09:19] [Output] : ⭐ -by depressing the humb tab and unplugging the 3pin connectors from underneath the top- ((Dion Winters))
- [2019-11-21 23:10:41] [Output] : ⭐ -plate, then pries and pops the fuel temperature sensor probe out of the securing tabs. ((Dion Winters))
- [2019-11-21 23:11:07] [Output] : ⭐ Dion Winters presses the right thumb tab inwards and simultaneously pushes the module up and out*
- [2019-11-21 23:11:26] [Output] : ⭐ -gently until it unlocks, then removes the fuel level sender. ((Dion Winters))
- [2019-11-21 23:11:59] [Output] : ⭐ Dion Winters then releases the temperature probe wires from the fuel pump housing tabs to fully release
- [2019-11-21 23:12:45] [Output] : ⭐ the sensor assembly. ((Dion Winters))
- [2019-11-21 23:14:04] [Output] : ⭐ Dion Winters reaches in the gas tank and findes the short rubber crossover hose, then loosen the clamp-
- [2019-11-21 23:14:25] [Output] : ⭐ -and rotates it so that the end points towards the right side of the vehicle. ((Dion Winters))
- [2019-11-21 23:15:07] [Output] : ⭐ Dion Winters reaches for the new fuel pump then lowers it close to the gas tank hole.
- [2019-11-21 23:15:31] [Output] : [ADMIN-JAIL]: Admin Peter Burrows jailed Ennis Burke for 15 minute(s).
- [2019-11-21 23:15:31] [Output] : [ADMIN-JAIL]: Reason: Not RPing injuries.
- [2019-11-21 23:15:32] [Output] : ⭐ from the collector box, brings the 2 connectors for the fuel level and temp sensor up and ((Dion Winters))
- [2019-11-21 23:16:00] [Output] : ⭐ -out of the tank, then assembles the 2 included mating connectors so the wires attach as- ((Dion Winters))
- [2019-11-21 23:16:07] [Output] : ⭐ -follows. ((Dion Winters))
- [2019-11-21 23:16:19] [Output] : [ADMIN-JAIL]: Admin Peter Burrows jailed Killian Foley for 15 minute(s).
- [2019-11-21 23:16:19] [Output] : [ADMIN-JAIL]: Reason: Insulting
- [2019-11-21 23:16:30] [Output] : ⭐ Dion Winters connects the temperature sensor plug to the mating plug on the hanger with the green and
- [2019-11-21 23:16:52] [Output] : ⭐ -white wires, then connects the level sender to the mating plug with the blue and brown wire ((Dion Winters))
- [2019-11-21 23:17:29] [Output] : (( If you guys roleplay illegal activity wish to tag walls and cars, you may receive /graffiti permission. :) Just ask ))
- [2019-11-21 23:18:24] [Output] : ⭐ Dion Winters reaches in to pull the crossover hose out and slides it over the jet jump barb, then secures
- [2019-11-21 23:18:33] [Output] : ⭐ the oem spring clamp using pliers. ((Dion Winters))
- [2019-11-21 23:18:51] [Output] : ⭐ Dion Winters wraps the oem retaining ring around the hanger top and then carefully dops the hanger down
- [2019-11-21 23:19:02] [Output] : ⭐ -onto the tank. ((Dion Winters))
- [2019-11-21 23:19:25] [Output] : ⭐ Dion Winters reaches for the m5 nuts then begins to set them in place using 8mm wrench.
- [2019-11-21 23:19:51] [Output] : ⭐ Dion Winters lubricates the oring found on the oem pressure sensor and insterts it onto the top of the
- [2019-11-21 23:20:20] [Output] : ⭐ -hanger then installs the black hold down bracket and linesup the 2holes, then secures the ((Dion Winters))
- [2019-11-21 23:20:39] [Output] : ⭐ pressure sensor down as shown with 2.5mm Allen hex wrench. ((Dion Winters))
- [2019-11-21 23:21:43] [Output] : Announcement: A roleplay school is about to begin, if you wish to ask any questions regarding the rules or how to roleplay properly, pm ID 17 to get TPed. (Make sure
- you're not in a roleplay nor inside a vehicle.)
- [2019-11-21 23:21:58] [Output] : ⭐ Dion Winters gently places the cover back to the fuel pump then leaves the rear without seats.
- [2019-11-21 23:22:25] [Output] : ⭐ Dion Winters steps off the vehicle then reaches for the red cable then plugs it then secures the 8mm bolt
- [2019-11-21 23:23:49] [Output] : [English] Dion Winters says: Let's prepare this badboy now.
- [2019-11-21 23:24:14] [Output] : ⭐ Dion Winters walks towards the driver door then opens the door as he gets in then twists the key in-
- [2019-11-21 23:25:27] [Output] : ⭐ Dion Winters the ignition without starting the engine just to check the fuel status.
- [2019-11-20 16:45:28] [Output] : ⭐ Dion Winters walks towards the vrtuned package then grabs it as heads towards th
- [2019-11-20 16:46:07] [Output] : ⭐ -the car then places the package in a safe location. ((Dion Winters))
- [2019-11-20 16:47:09] [Output] : ⭐ the car would be secured on the dyno. ((Dion Winters))
- [2019-11-20 16:47:42] [Output] : Capture d'écran effectuée: 'C:\Program Files (x86)\MTA San Andreas 1.5\screenshots\mta-screen_2019-11-20_16-47-42.png'
- [2019-11-20 16:47:51] [Output] : ⭐ Dion Winters opens the vrtuned kit then gets inside the car as he seats in the driver seat.
- [2019-11-20 16:48:16] [Output] : ⭐ Dion Winters places the kit next to him in the passenger seat then gets outside off the car.
- [2019-11-20 16:48:55] [Output] : ⭐ Dion Winters grabs the window 10 HP laptop then walks back towards the car as he gets inside.
- [2019-11-20 16:50:13] [Output] : ⭐ Dion Winters reaches for the kit then grabs the usb key as he connects it to the laptop.
- [2019-11-20 16:50:51] [Output] : ⭐ Dion Winters reaches for the obd port then grabs it as he extends right arm towards the obd2 port in the-
- [2019-11-20 16:51:11] [Output] : ⭐ -the car near the hood releaser, then removes the cover. ((Dion Winters))
- [2019-11-20 16:52:18] [Output] : ⭐ Dion Winters places it in safe location as he extends right arm towards the mouse cursor then moves it
- [2019-11-20 16:52:29] [Output] : ⭐ -towards the vrtuned folder in the usb then opens it. ((Dion Winters))
- [2019-11-20 16:52:36] [Output] : ⭐ there would be bunch of files there. ((Dion Winters))
- [2019-11-20 16:52:53] [Output] : ⭐ Dion Winters moves the cursor towards the setup.exe, then runs it.
- [2019-11-20 16:53:57] [Output] : ⭐ a window would be visible, presses next then chooses the destination of the installation. ((Dion Winters))
- [2019-11-20 16:54:24] [Output] : ⭐ Dion Winters after the installation, runs the software, ' there would be a window with bunch of buttons -
- [2019-11-20 16:54:34] [Output] : ⭐ -and textes. ((Dion Winters))
- [2019-11-20 16:55:25] [Output] : [NEWS] The lottery was drawn! Number: 38. Jackpot: $50,736
- [2019-11-20 16:55:28] [Output] : ⭐ Dion Winters presses the update button, a window should be visible.
- [2019-11-20 16:55:51] [Output] : ⭐ Dion Winters presses 'update my genius software' then hits okay.
- [2019-11-20 16:56:15] [Output] : ⭐ Dion Winters' progress bar with downloading time should be visible'/
- [2019-11-20 16:56:41] [Output] : ⭐ after the download is completed, Dion presses okay then quits the software. ((Dion Winters))
- [2019-11-20 16:57:09] [Output] : ⭐ Dion Winters unpluggs the usb cord then attaches the OBD2 cord to the device, and bring it to the car.
- [2019-11-20 16:57:46] [Output] : ⭐ Dion Winters plugs the OBD2 plug into the OBD2 port, ' the device in the main menu shouldpop up'.
- [2019-11-20 16:58:40] [Output] : ⭐ Dion Winters selects 'WORK' then selecs 'PRT INDENTIFY', a window should be visible ' switch on the *
- [2019-11-20 16:58:54] [Output] : ⭐ -the dhasboard, then press ok'. ((Dion Winters))
- [2019-11-20 16:59:13] [Output] : ⭐ Dion Winters extends right arm towards the key then twist it to the right as he turns on the ignition but
- [2019-11-20 16:59:18] [Output] : ⭐ -not the engine. ((Dion Winters))
- [2019-11-20 17:00:02] [Output] : ⭐ Dion Winters presses ok, ' a Progress bar should be visible', 'Protocol Indentify: FLASH_XXXX.
- [2019-11-20 17:00:40] [Output] : ⭐ Dion Winters selects ID, then Selects ' WRITE'.
- [2019-11-20 17:01:01] [Output] : ⭐ Dion Winters disconnects mygenius device, then reaches for the laptop.
- [2019-11-20 17:01:33] [Output] : ⭐ Dion Winters presses the Download Button, then selects Next, then the destination of the file, then
- [2019-11-20 17:01:42] [Output] : ⭐ -selects Next. ((Dion Winters))
- [2019-11-20 17:02:26] [Output] : ⭐ when the download is completed, presses Close and locates the file. ((Dion Winters))
- [2019-11-21 18:28:04] [Output] : ⭐ Dion Winters moves the cursor towards the upload button, then presses it.
- [2019-11-21 18:28:30] [Output] : ⭐ Dion Winters selects the file destination then selects the file, then types login
- [2019-11-21 18:28:48] [Output] : ⭐ -informations then hits ok. ((Dion Winters))
- [2019-11-21 18:29:06] [Output] : ⭐ a progress bar should be visible containing upload status. ((Dion Winters))
- [2019-11-21 18:29:42] [Output] : ⭐ once the upload completed, 'a message would be visible : After 24hours you'll receive the- ((Dion Winters))
- [2019-11-21 18:29:53] [Output] : ⭐ -the tune file at your email adress'. ((Dion Winters))
- [2019-11-21 19:10:25] [Output] : ⭐ after receiving the tune, Dion would presses the select tune button, then would choose- ((Dion Winters))
- [2019-11-21 19:11:13] [Output] : ⭐ -the destination, then presses Ok and wait few minutes. ((Dion Winters))
- [2019-11-21 19:11:43] [Output] : ⭐ after the importation is completed, Dion would connects the device to the OBD2 port, then- ((Dion Winters))
- [2019-11-21 19:12:03] [Output] : ⭐ -would presses Next, 'few alerts should be visible', presses Next then. ((Dion Winters))
- [2019-11-21 19:14:11] [Output] : ⭐ then presses 'Write', 'a window would say: do not turn off ignition'. ((Dion Winters))
- [2019-11-21 19:14:29] [Output] : ⭐ after around 10mintues the tuning should be done now. ((Dion Winters))
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement