API tools faq
paste
Advertisement
Kr0n0s

Untitled

Kr0n0s
Jul 8th, 2024
54
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 10.70 KB | None | 0 0
raw download clone embed print report
  1. # smartctl -a /dev/sdg
  2. smartctl 7.4 2023-08-01 r5530 [x86_64-linux-6.6.29-production+truenas] (local build)
  3. Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org
  4.  
  5. === START OF INFORMATION SECTION ===
  6. Model Family: Seagate IronWolf Pro
  7. Device Model: ST12000NE0008-2PK103
  8. Serial Number: ZTN08BTM
  9. LU WWN Device Id: 5 000c50 0b1f18cf4
  10. Firmware Version: CN03
  11. User Capacity: 12,000,138,625,024 bytes [12.0 TB]
  12. Sector Sizes: 512 bytes logical, 4096 bytes physical
  13. Rotation Rate: 7200 rpm
  14. Form Factor: 3.5 inches
  15. Device is: In smartctl database 7.3/5528
  16. ATA Version is: ACS-3 T13/2161-D revision 5
  17. SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s)
  18. Local Time is: Sun Jul 7 11:34:49 2024 CEST
  19. SMART support is: Available - device has SMART capability.
  20. SMART support is: Enabled
  21.  
  22. === START OF READ SMART DATA SECTION ===
  23. SMART overall-health self-assessment test result: PASSED
  24.  
  25. General SMART Values:
  26. Offline data collection status: (0x82) Offline data collection activity
  27. was completed without error.
  28. Auto Offline Data Collection: Enabled.
  29. Self-test execution status: ( 0) The previous self-test routine completed
  30. without error or no self-test has ever
  31. been run.
  32. Total time to complete Offline
  33. data collection: ( 567) seconds.
  34. Offline data collection
  35. capabilities: (0x7b) SMART execute Offline immediate.
  36. Auto Offline data collection on/off support.
  37. Suspend Offline collection upon new
  38. command.
  39. Offline surface scan supported.
  40. Self-test supported.
  41. Conveyance Self-test supported.
  42. Selective Self-test supported.
  43. SMART capabilities: (0x0003) Saves SMART data before entering
  44. power-saving mode.
  45. Supports SMART auto save timer.
  46. Error logging capability: (0x01) Error logging supported.
  47. General Purpose Logging supported.
  48. Short self-test routine
  49. recommended polling time: ( 1) minutes.
  50. Extended self-test routine
  51. recommended polling time: (1063) minutes.
  52. Conveyance self-test routine
  53. recommended polling time: ( 2) minutes.
  54. SCT capabilities: (0x50bd) SCT Status supported.
  55. SCT Error Recovery Control supported.
  56. SCT Feature Control supported.
  57. SCT Data Table supported.
  58.  
  59. SMART Attributes Data Structure revision number: 10
  60. Vendor Specific SMART Attributes with Thresholds:
  61. ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
  62. 1 Raw_Read_Error_Rate 0x000f 082 064 044 Pre-fail Always - 163645724
  63. 3 Spin_Up_Time 0x0003 090 089 000 Pre-fail Always - 0
  64. 4 Start_Stop_Count 0x0032 100 100 020 Old_age Always - 98
  65. 5 Reallocated_Sector_Ct 0x0033 092 092 010 Pre-fail Always - 32568
  66. 7 Seek_Error_Rate 0x000f 081 060 045 Pre-fail Always - 122709146
  67. 9 Power_On_Hours 0x0032 097 097 000 Old_age Always - 3132
  68. 10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0
  69. 12 Power_Cycle_Count 0x0032 100 100 020 Old_age Always - 31
  70. 187 Reported_Uncorrect 0x0032 001 001 000 Old_age Always - 150
  71. 188 Command_Timeout 0x0032 100 100 000 Old_age Always - 0
  72. 190 Airflow_Temperature_Cel 0x0022 056 049 040 Old_age Always - 44 (Min/Max 40/45)
  73. 192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 9
  74. 193 Load_Cycle_Count 0x0032 092 092 000 Old_age Always - 16281
  75. 194 Temperature_Celsius 0x0022 044 051 000 Old_age Always - 44 (0 19 0 0 0)
  76. 195 Hardware_ECC_Recovered 0x001a 014 004 000 Old_age Always - 163645724
  77. 197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 0
  78. 198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 0
  79. 199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0
  80. 200 Pressure_Limit 0x0023 100 100 001 Pre-fail Always - 0
  81. 240 Head_Flying_Hours 0x0000 100 253 000 Old_age Offline - 590h+01m+28.574s
  82. 241 Total_LBAs_Written 0x0000 100 253 000 Old_age Offline - 114038905372
  83. 242 Total_LBAs_Read 0x0000 100 253 000 Old_age Offline - 51142668151
  84.  
  85. SMART Error Log Version: 1
  86. ATA Error Count: 150 (device log contains only the most recent five errors)
  87. CR = Command Register [HEX]
  88. FR = Features Register [HEX]
  89. SC = Sector Count Register [HEX]
  90. SN = Sector Number Register [HEX]
  91. CL = Cylinder Low Register [HEX]
  92. CH = Cylinder High Register [HEX]
  93. DH = Device/Head Register [HEX]
  94. DC = Device Command Register [HEX]
  95. ER = Error register [HEX]
  96. ST = Status register [HEX]
  97. Powered_Up_Time is measured from power on, and printed as
  98. DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
  99. SS=sec, and sss=millisec. It "wraps" after 49.710 days.
  100.  
  101. Error 150 occurred at disk power-on lifetime: 3132 hours (130 days + 12 hours)
  102. When the command that caused the error occurred, the device was active or idle.
  103.  
  104. After command completion occurred, registers were:
  105. ER ST SC SN CL CH DH
  106. -- -- -- -- -- -- --
  107. 40 53 00 ff ff ff 0f Error: UNC at LBA = 0x0fffffff = 268435455
  108.  
  109. Commands leading to the command that caused the error were:
  110. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  111. -- -- -- -- -- -- -- -- ---------------- --------------------
  112. 60 00 00 ff ff ff 4f 00 00:26:36.258 READ FPDMA QUEUED
  113. 47 00 01 13 00 00 a0 00 00:26:36.257 READ LOG DMA EXT
  114. 47 00 01 00 00 00 a0 00 00:26:36.257 READ LOG DMA EXT
  115. ef 10 02 00 00 00 a0 00 00:26:36.257 SET FEATURES [Enable SATA feature]
  116. ec 00 00 00 00 00 a0 00 00:26:36.254 IDENTIFY DEVICE
  117.  
  118. Error 149 occurred at disk power-on lifetime: 3132 hours (130 days + 12 hours)
  119. When the command that caused the error occurred, the device was active or idle.
  120.  
  121. After command completion occurred, registers were:
  122. ER ST SC SN CL CH DH
  123. -- -- -- -- -- -- --
  124. 40 53 00 ff ff ff 0f Error: UNC at LBA = 0x0fffffff = 268435455
  125.  
  126. Commands leading to the command that caused the error were:
  127. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  128. -- -- -- -- -- -- -- -- ---------------- --------------------
  129. 60 00 00 ff ff ff 4f 00 00:26:26.670 READ FPDMA QUEUED
  130. 47 00 01 13 00 00 a0 00 00:26:26.664 READ LOG DMA EXT
  131. 47 00 01 00 00 00 a0 00 00:26:26.663 READ LOG DMA EXT
  132. ef 10 02 00 00 00 a0 00 00:26:26.663 SET FEATURES [Enable SATA feature]
  133. ec 00 00 00 00 00 a0 00 00:26:26.661 IDENTIFY DEVICE
  134.  
  135. Error 148 occurred at disk power-on lifetime: 3132 hours (130 days + 12 hours)
  136. When the command that caused the error occurred, the device was active or idle.
  137.  
  138. After command completion occurred, registers were:
  139. ER ST SC SN CL CH DH
  140. -- -- -- -- -- -- --
  141. 40 53 00 ff ff ff 0f Error: UNC at LBA = 0x0fffffff = 268435455
  142.  
  143. Commands leading to the command that caused the error were:
  144. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  145. -- -- -- -- -- -- -- -- ---------------- --------------------
  146. 60 00 00 ff ff ff 4f 00 00:26:17.409 READ FPDMA QUEUED
  147. 47 00 01 13 00 00 a0 00 00:26:17.408 READ LOG DMA EXT
  148. 47 00 01 00 00 00 a0 00 00:26:17.407 READ LOG DMA EXT
  149. ef 10 02 00 00 00 a0 00 00:26:17.407 SET FEATURES [Enable SATA feature]
  150. ec 00 00 00 00 00 a0 00 00:26:17.405 IDENTIFY DEVICE
  151.  
  152. Error 147 occurred at disk power-on lifetime: 3132 hours (130 days + 12 hours)
  153. When the command that caused the error occurred, the device was active or idle.
  154.  
  155. After command completion occurred, registers were:
  156. ER ST SC SN CL CH DH
  157. -- -- -- -- -- -- --
  158. 40 53 00 ff ff ff 0f Error: UNC at LBA = 0x0fffffff = 268435455
  159.  
  160. Commands leading to the command that caused the error were:
  161. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  162. -- -- -- -- -- -- -- -- ---------------- --------------------
  163. 60 00 00 ff ff ff 4f 00 00:26:08.093 READ FPDMA QUEUED
  164. 47 00 01 13 00 00 a0 00 00:26:08.090 READ LOG DMA EXT
  165. 47 00 01 00 00 00 a0 00 00:26:08.090 READ LOG DMA EXT
  166. ef 10 02 00 00 00 a0 00 00:26:08.090 SET FEATURES [Enable SATA feature]
  167. ec 00 00 00 00 00 a0 00 00:26:08.088 IDENTIFY DEVICE
  168.  
  169. Error 146 occurred at disk power-on lifetime: 3132 hours (130 days + 12 hours)
  170. When the command that caused the error occurred, the device was active or idle.
  171.  
  172. After command completion occurred, registers were:
  173. ER ST SC SN CL CH DH
  174. -- -- -- -- -- -- --
  175. 40 53 00 ff ff ff 0f Error: UNC at LBA = 0x0fffffff = 268435455
  176.  
  177. Commands leading to the command that caused the error were:
  178. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  179. -- -- -- -- -- -- -- -- ---------------- --------------------
  180. 60 00 00 ff ff ff 4f 00 00:25:58.546 READ FPDMA QUEUED
  181. 47 00 01 13 00 00 a0 00 00:25:58.539 READ LOG DMA EXT
  182. 47 00 01 00 00 00 a0 00 00:25:58.539 READ LOG DMA EXT
  183. ef 10 02 00 00 00 a0 00 00:25:58.539 SET FEATURES [Enable SATA feature]
  184. ec 00 00 00 00 00 a0 00 00:25:58.537 IDENTIFY DEVICE
  185.  
  186. SMART Self-test log structure revision number 1
  187. No self-tests have been logged. [To run self-tests, use: smartctl -t]
  188.  
  189. SMART Selective self-test log data structure revision number 1
  190. SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
  191. 1 0 0 Not_testing
  192. 2 0 0 Not_testing
  193. 3 0 0 Not_testing
  194. 4 0 0 Not_testing
  195. 5 0 0 Not_testing
  196. Selective self-test flags (0x0):
  197. After scanning selected spans, do NOT read-scan remainder of disk.
  198. If Selective self-test is pending on power-up, resume after 0 minute delay.
  199.  
  200. The above only provides legacy SMART information - try 'smartctl -x' for more
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement
Public Pastes
Advertisement
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!