API tools faq
paste
Advertisement
Guest User

lspci output on Fedora 29 and HP x2 Notebook

a guest
May 12th, 2019
156
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 14.45 KB | None | 0 0
raw download clone embed print report
  1. 00:00.0 Host bridge: Intel Corporation Atom/Celeron/Pentium Processor x5-E8000/J3xxx/N3xxx Series SoC Transaction Register (rev 36)
  2. Subsystem: Hewlett-Packard Company Device 827c
  3. Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
  4. Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
  5. Latency: 0
  6. Kernel driver in use: iosf_mbi_pci
  7.  
  8. 00:02.0 VGA compatible controller: Intel Corporation Atom/Celeron/Pentium Processor x5-E8000/J3xxx/N3xxx Series PCI Configuration Registers (rev 36) (prog-if 00 [VGA controller])
  9. DeviceName: Onboard IGD
  10. Subsystem: Hewlett-Packard Company Device 827c
  11. Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
  12. Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
  13. Latency: 0
  14. Interrupt: pin A routed to IRQ 120
  15. Region 0: Memory at 90000000 (64-bit, non-prefetchable) [size=16M]
  16. Region 2: Memory at 80000000 (64-bit, prefetchable) [size=256M]
  17. Region 4: I/O ports at f000 [size=64]
  18. [virtual] Expansion ROM at 000c0000 [disabled] [size=128K]
  19. Capabilities: [d0] Power Management version 2
  20. Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
  21. Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
  22. Capabilities: [90] MSI: Enable+ Count=1/1 Maskable- 64bit-
  23. Address: fee02004 Data: 4029
  24. Capabilities: [b0] Vendor Specific Information: Len=07 <?>
  25. Kernel driver in use: i915
  26. Kernel modules: i915
  27.  
  28. 00:03.0 Multimedia controller: Intel Corporation Atom/Celeron/Pentium Processor x5-E8000/J3xxx/N3xxx Series Imaging Unit (rev 36)
  29. Subsystem: Hewlett-Packard Company Device 827c
  30. Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
  31. Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
  32. Interrupt: pin A routed to IRQ 255
  33. Region 0: [virtual] Memory at 91000000 (32-bit, non-prefetchable) [size=4M]
  34. Capabilities: [80] Power Management version 2
  35. Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
  36. Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
  37. Capabilities: [90] MSI: Enable- Count=1/1 Maskable- 64bit-
  38. Address: 00000000 Data: 0000
  39. Kernel driver in use: intel_atomisp2_pm
  40. Kernel modules: intel_atomisp2_pm
  41.  
  42. 00:0a.0 Non-VGA unclassified device: Intel Corporation Device 22d8 (rev 36)
  43. Subsystem: Hewlett-Packard Company Device 827c
  44. Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
  45. Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
  46. Latency: 0, Cache Line Size: 64 bytes
  47. Interrupt: pin A routed to IRQ 20
  48. Region 0: Memory at 9193c000 (32-bit, non-prefetchable) [size=4K]
  49. Capabilities: [80] Power Management version 3
  50. Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
  51. Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
  52. Kernel driver in use: intel_ish_ipc
  53. Kernel modules: intel_ish_ipc
  54.  
  55. 00:0b.0 Signal processing controller: Intel Corporation Atom/Celeron/Pentium Processor x5-E8000/J3xxx/N3xxx Series Power Management Controller (rev 36)
  56. Subsystem: Hewlett-Packard Company Device 827c
  57. Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
  58. Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
  59. Interrupt: pin A routed to IRQ 130
  60. Region 0: Memory at 9193b000 (64-bit, non-prefetchable) [size=4K]
  61. Capabilities: [40] MSI: Enable+ Count=1/1 Maskable- 64bit-
  62. Address: fee04004 Data: 4027
  63. Capabilities: [50] Power Management version 3
  64. Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
  65. Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
  66. Kernel driver in use: proc_thermal
  67. Kernel modules: processor_thermal_device
  68.  
  69. 00:14.0 USB controller: Intel Corporation Atom/Celeron/Pentium Processor x5-E8000/J3xxx/N3xxx Series USB xHCI Controller (rev 36) (prog-if 30 [XHCI])
  70. Subsystem: Hewlett-Packard Company Device 827c
  71. Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
  72. Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
  73. Latency: 0
  74. Interrupt: pin A routed to IRQ 117
  75. Region 0: Memory at 91900000 (64-bit, non-prefetchable) [size=64K]
  76. Capabilities: [70] Power Management version 2
  77. Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0-,D1-,D2-,D3hot+,D3cold+)
  78. Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
  79. Capabilities: [80] MSI: Enable+ Count=1/8 Maskable- 64bit+
  80. Address: 00000000fee04004 Data: 4028
  81. Kernel driver in use: xhci_hcd
  82.  
  83. 00:1a.0 Encryption controller: Intel Corporation Atom/Celeron/Pentium Processor x5-E8000/J3xxx/N3xxx Series Trusted Execution Engine (rev 36)
  84. Subsystem: Hewlett-Packard Company Device 827c
  85. Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
  86. Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
  87. Latency: 0, Cache Line Size: 64 bytes
  88. Interrupt: pin A routed to IRQ 131
  89. Region 0: Memory at 91700000 (32-bit, non-prefetchable) [size=1M]
  90. Region 1: Memory at 91600000 (32-bit, non-prefetchable) [size=1M]
  91. Capabilities: [80] Power Management version 3
  92. Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold-)
  93. Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
  94. Capabilities: [a0] MSI: Enable+ Count=1/1 Maskable- 64bit-
  95. Address: fee08004 Data: 4027
  96. Kernel driver in use: mei_txe
  97. Kernel modules: mei_txe
  98.  
  99. 00:1c.0 PCI bridge: Intel Corporation Atom/Celeron/Pentium Processor x5-E8000/J3xxx/N3xxx Series PCI Express Port #1 (rev 36) (prog-if 00 [Normal decode])
  100. Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
  101. Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
  102. Latency: 0, Cache Line Size: 64 bytes
  103. Interrupt: pin A routed to IRQ 116
  104. Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
  105. I/O behind bridge: None
  106. Memory behind bridge: 91800000-918fffff [size=1M]
  107. Prefetchable memory behind bridge: None
  108. Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
  109. BridgeCtl: Parity- SERR- NoISA- VGA- VGA16+ MAbort- >Reset- FastB2B-
  110. PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
  111. Capabilities: [40] Express (v2) Root Port (Slot+), MSI 00
  112. DevCap: MaxPayload 128 bytes, PhantFunc 0
  113. ExtTag- RBE+
  114. DevCtl: CorrErr- NonFatalErr- FatalErr- UnsupReq-
  115. RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
  116. MaxPayload 128 bytes, MaxReadReq 128 bytes
  117. DevSta: CorrErr- NonFatalErr- FatalErr- UnsupReq- AuxPwr+ TransPend-
  118. LnkCap: Port #1, Speed 5GT/s, Width x1, ASPM L0s L1, Exit Latency L0s <512ns, L1 <16us
  119. ClockPM- Surprise- LLActRep+ BwNot+ ASPMOptComp-
  120. LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- CommClk+
  121. ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
  122. LnkSta: Speed 2.5GT/s (downgraded), Width x1 (ok)
  123. TrErr- Train- SlotClk+ DLActive+ BWMgmt+ ABWMgmt-
  124. SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surprise-
  125. Slot #0, PowerLimit 10.000W; Interlock- NoCompl+
  126. SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
  127. Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock-
  128. SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock-
  129. Changed: MRL- PresDet- LinkState-
  130. RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna+ CRSVisible-
  131. RootCap: CRSVisible-
  132. RootSta: PME ReqID 0000, PMEStatus- PMEPending-
  133. DevCap2: Completion Timeout: Range ABC, TimeoutDis+, LTR+, OBFF Not Supported ARIFwd-
  134. AtomicOpsCap: Routing- 32bit- 64bit- 128bitCAS-
  135. DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis+, LTR+, OBFF Disabled ARIFwd-
  136. AtomicOpsCtl: ReqEn- EgressBlck-
  137. LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis-
  138. Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
  139. Compliance De-emphasis: -6dB
  140. LnkSta2: Current De-emphasis Level: -3.5dB, EqualizationComplete-, EqualizationPhase1-
  141. EqualizationPhase2-, EqualizationPhase3-, LinkEqualizationRequest-
  142. Capabilities: [80] MSI: Enable+ Count=1/1 Maskable- 64bit-
  143. Address: fee01004 Data: 4023
  144. Capabilities: [90] Subsystem: Hewlett-Packard Company Device 827c
  145. Capabilities: [a0] Power Management version 3
  146. Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
  147. Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
  148. Kernel driver in use: pcieport
  149.  
  150. 00:1f.0 ISA bridge: Intel Corporation Atom/Celeron/Pentium Processor x5-E8000/J3xxx/N3xxx Series PCU (rev 36)
  151. Subsystem: Hewlett-Packard Company Device 827c
  152. Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
  153. Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
  154. Latency: 0
  155. Capabilities: [e0] Vendor Specific Information: Len=0c <?>
  156. Kernel driver in use: lpc_ich
  157. Kernel modules: lpc_ich
  158.  
  159. 01:00.0 Network controller: Intel Corporation Wireless 3165 (rev 81)
  160. DeviceName: Intel Stone Peak I
  161. Subsystem: Intel Corporation Device 8010
  162. Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
  163. Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
  164. Latency: 0, Cache Line Size: 64 bytes
  165. Interrupt: pin A routed to IRQ 143
  166. Region 0: Memory at 91800000 (64-bit, non-prefetchable) [size=8K]
  167. Capabilities: [c8] Power Management version 3
  168. Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
  169. Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
  170. Capabilities: [d0] MSI: Enable+ Count=1/1 Maskable- 64bit+
  171. Address: 00000000fee08004 Data: 4028
  172. Capabilities: [40] Express (v2) Endpoint, MSI 00
  173. DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <512ns, L1 unlimited
  174. ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset+ SlotPowerLimit 0.000W
  175. DevCtl: CorrErr- NonFatalErr- FatalErr- UnsupReq-
  176. RlxdOrd- ExtTag- PhantFunc- AuxPwr+ NoSnoop+ FLReset-
  177. MaxPayload 128 bytes, MaxReadReq 128 bytes
  178. DevSta: CorrErr+ NonFatalErr- FatalErr- UnsupReq+ AuxPwr+ TransPend-
  179. LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L1, Exit Latency L1 <32us
  180. ClockPM+ Surprise- LLActRep- BwNot- ASPMOptComp+
  181. LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- CommClk+
  182. ExtSynch- ClockPM+ AutWidDis- BWInt- AutBWInt-
  183. LnkSta: Speed 2.5GT/s (ok), Width x1 (ok)
  184. TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
  185. DevCap2: Completion Timeout: Range B, TimeoutDis+, LTR+, OBFF Via WAKE#
  186. AtomicOpsCap: 32bit- 64bit- 128bitCAS-
  187. DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis+, LTR+, OBFF Disabled
  188. AtomicOpsCtl: ReqEn-
  189. LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis-
  190. Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
  191. Compliance De-emphasis: -6dB
  192. LnkSta2: Current De-emphasis Level: -3.5dB, EqualizationComplete-, EqualizationPhase1-
  193. EqualizationPhase2-, EqualizationPhase3-, LinkEqualizationRequest-
  194. Capabilities: [100 v1] Advanced Error Reporting
  195. UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
  196. UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
  197. UESvrt: DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
  198. CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- AdvNonFatalErr-
  199. CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- AdvNonFatalErr+
  200. AERCap: First Error Pointer: 00, ECRCGenCap- ECRCGenEn- ECRCChkCap- ECRCChkEn-
  201. MultHdrRecCap- MultHdrRecEn- TLPPfxPres- HdrLogCap-
  202. HeaderLog: 00000000 00000000 00000000 00000000
  203. Capabilities: [140 v1] Device Serial Number b4-69-21-ff-ff-e8-c9-d9
  204. Capabilities: [14c v1] Latency Tolerance Reporting
  205. Max snoop latency: 15360ns
  206. Max no snoop latency: 15360ns
  207. Capabilities: [154 v1] L1 PM Substates
  208. L1SubCap: PCI-PM_L1.2+ PCI-PM_L1.1+ ASPM_L1.2+ ASPM_L1.1+ L1_PM_Substates+
  209. PortCommonModeRestoreTime=30us PortTPowerOnTime=60us
  210. L1SubCtl1: PCI-PM_L1.2- PCI-PM_L1.1- ASPM_L1.2- ASPM_L1.1-
  211. T_CommonMode=0us LTR1.2_Threshold=0ns
  212. L1SubCtl2: T_PwrOn=10us
  213. Kernel driver in use: iwlwifi
  214. Kernel modules: iwlwifi
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement
Public Pastes
Advertisement
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!