Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- osmc@osmc:~$ dmesg
- [ 0.000000] Initializing cgroup subsys cpuset
- [ 0.000000] Initializing cgroup subsys cpu
- [ 0.000000] Initializing cgroup subsys cpuacct
- [ 0.000000] Linux version 3.14.29-99-osmc (root@vero3-db) (gcc version 6.3.0 20170516 (Debian 6.3.0-18) ) #1 SMP Fri Jun 8 14:57:12 UTC 2018
- [ 0.000000] CPU: AArch64 Processor [410fd034] revision 4
- [ 0.000000] no prop version_code
- [ 0.000000] bootconsole [earlycon0] enabled
- [ 0.000000] fdt Reserved memory table:
- [ 0.000000] linux,meson-fb: 0x000000007d100000 - 0x000000007f100000 (32 MiB)
- [ 0.000000] linux,di: 0x000000007b300000 - 0x000000007d100000 (30 MiB)
- [ 0.000000] DI: DI reserved memory: created CMA memory pool at 0x000000007b300000, size 30 MiB
- [ 0.000000] linux,ion-dev: 0x0000000078300000 - 0x000000007b300000 (48 MiB)
- [ 0.000000] linux,vdin1_cma: 0x0000000077000000 - 0x0000000078000000 (16 MiB)
- [ 0.000000] cma: Reserved 16 MiB at 77000000, total cma pages:4096
- [ 0.000000] linux,ppmgr: 0x0000000078300000 - 0x0000000078300000 (0 MiB)
- [ 0.000000] linux,codec_mm_cma: 0x0000000067c00000 - 0x0000000073c00000 (192 MiB)
- [ 0.000000] cma: Reserved 192 MiB at 67c00000, total cma pages:53248
- [ 0.000000] linux,picdec: 0x0000000078300000 - 0x0000000078300000 (0 MiB)
- [ 0.000000] Reserved memory: incorrect alignment of CMA region
- [ 0.000000] linux,codec_mm_reserved: 0x0000000063b00000 - 0x0000000067c00000 (65 MiB)
- [ 0.000000] fdt Reserved memory total: 386 MiB
- [ 0.000000] cma: Reserved 8 MiB at 76800000, total cma pages:55296
- [ 0.000000] On node 0 totalpages: 511232
- [ 0.000000] Normal zone: 11000 pages used for memmap
- [ 0.000000] Normal zone: 0 pages reserved
- [ 0.000000] Normal zone: 511232 pages, LIFO batch:31
- [ 0.000000] psci: probing function IDs from device-tree
- [ 0.000000] PERCPU: Embedded 12 pages/cpu @ffffffc0782a0000 s16768 r8192 d24192 u49152
- [ 0.000000] pcpu-alloc: s16768 r8192 d24192 u49152 alloc=12*4096
- [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
- [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 500232
- [ 0.000000] Kernel command line: rootfstype=ramfs init=/init console=ttyS0,115200 no_console_suspend earlyprintk=aml-uart,0xc81004c0 ramoops.pstore_en=1 ramoops.record_size=0x8000 ramoops.console_size=0x4000 androidboot.selinux=permissive logo=osd1,loaded,0x3d800000,1080p60hz maxcpus=4 vout=1080p60hz,enable hdmimode=1080p60hz cvbsmode=576cvbs hdmitx= cvbsdrv=0 androidboot.firstboot=0 jtag=apao androidboot.hardware=amlogic mac=c4:4e:ac:14:37:7a androidboot.mac=c4:4e:ac:14:37:7a root=/dev/vero-nand/root rootfstype=ext4 quiet console=tty0 osmcdev=vero3
- [ 0.000000] logo: osd1
- [ 0.000000] logo: loaded
- [ 0.000000] logo: 0x3d800000
- [ 0.000000] logo: 1080p60hz
- [ 0.000000] vout_serve: 1080p60hz
- [ 0.000000] vout_serve: en: 1
- [ 0.000000] logo: get hdmimode: 1080p60hz
- [ 0.000000] logo: get cvbsmode: 576cvbs
- [ 0.000000] tv_vout: cvbs performance line = 0
- [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
- [ 0.000000] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
- [ 0.000000] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
- [ 0.000000] Memory: 1607904K/2044928K available (8458K kernel code, 830K rwdata, 3200K rodata, 980K init, 2936K bss, 437024K reserved)
- [ 0.000000] Virtual kernel memory layout:
- vmalloc : 0xffffff8000000000 - 0xffffff8040000000 ( 1024 MB)
- vmemmap : 0xffffff8040010000 - 0xffffff8042b0d800 ( 42 MB)
- modules : 0xffffffbffc000000 - 0xffffffc000000000 ( 64 MB)
- memory : 0xffffffc000000000 - 0xffffffc07d100000 ( 2001 MB)
- .init : 0xffffffc001be4000 - 0xffffffc001cd9180 ( 981 kB)
- .text : 0xffffffc001080000 - 0xffffffc001be3854 ( 11663 kB)
- .data : 0xffffffc001cda000 - 0xffffffc001da9b00 ( 831 kB)
- [ 0.000000] PM: Registered nosave memory: [mem 0x01080000-0x01be2fff]
- [ 0.000000] SLUB: HWalign=64, Order=0-1, MinObjects=0, CPUs=4, Nodes=1
- [ 0.000000] arch_multi_cluster:0
- [ 0.000000] Hierarchical RCU implementation.
- [ 0.000000] RCU debugfs-based tracing is enabled.
- [ 0.000000] CONFIG_RCU_FANOUT set to non-default value of 32
- [ 0.000000] RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4.
- [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
- [ 0.000000] NR_IRQS:64 nr_irqs:64 0
- [ 0.000000] Architected cp15 timer(s) running at 24.00MHz (phys).
- [ 0.000004] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 2863311519744ns
- [ 0.000029] meson_bc_timer: mclk->mux_reg =ffffff800000c990,mclk->reg =ffffff800000e994
- [ 0.000309] Console: colour dummy device 80x25
- [ 0.000316] console [tty0] enabled
- [ 0.000321] bootconsole [earlycon0] disabled
- [ 0.002127] allocated 8388608 bytes of page_cgroup
- [ 0.002132] please try 'cgroup_disable=memory' option if you don't want memory cgroups
- [ 0.002146] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=240000)
- [ 0.002155] pid_max: default: 32768 minimum: 301
- [ 0.002285] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes)
- [ 0.002294] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes)
- [ 0.007122] Initializing cgroup subsys memory
- [ 0.007147] Initializing cgroup subsys devices
- [ 0.007153] Initializing cgroup subsys freezer
- [ 0.007159] Initializing cgroup subsys blkio
- [ 0.007164] Initializing cgroup subsys bfqio
- [ 0.007227] ftrace: allocating 28911 entries in 113 pages
- [ 0.035224] /cpus/cpu@0: Missing clock-frequency property
- [ 0.035240] /cpus/cpu@1: Missing clock-frequency property
- [ 0.035248] /cpus/cpu@2: Missing clock-frequency property
- [ 0.035255] /cpus/cpu@3: Missing clock-frequency property
- [ 0.035775] Meson chip version = RevA (21:A - 82:0)
- [ 0.036108] CPU1: Booted secondary processor
- [ 0.036474] CPU2: Booted secondary processor
- [ 0.036795] CPU3: Booted secondary processor
- [ 0.036863] Brought up 4 CPUs
- [ 0.036878] SMP: Total of 4 processors activated.
- [ 0.037354] devtmpfs: initialized
- [ 0.043519] sched: registering cpufreq notifiers for scale-invariant loads
- [ 0.043548] instabooting: 0
- [ 0.051508] cma: cma_init_reserved_areas, use_cma_first:1
- [ 0.051571] pinctrl core: initialized pinctrl subsystem
- [ 0.051802] regulator-dummy: no parameters
- [ 0.052175] NET: Registered protocol family 16
- [ 0.053452] ramoops: using module parameters
- [ 0.053740] pstore: Registered ramoops as persistent store backend
- [ 0.053747] ramoops: attached 0x100000@0x7300000, ecc: 0/0
- [ 0.053981] aml_vdac_init: module init
- [ 0.054024] register canvas platform driver
- [ 0.054046] register rdma platform driver
- [ 0.055274] vdso: 2 pages (1 code, 1 data) at base ffffffc001ce4000
- [ 0.055587] DMA: preallocated 256 KiB pool for atomic allocations
- [ 0.056502] software IO TLB [mem 0x61c00000-0x62000000] (4MB) mapped at [ffffffc061c00000-ffffffc061ffffff]
- [ 0.056629] i2c-core: driver [pmu4] using legacy resume method
- [ 0.056654] codec_mm:codec_mm_module_init
- [ 0.056871] gxbb_mpll_clk: register mpll_clk_out0 success done
- [ 0.056879] gxbb_mpll_clk: register mpll_clk_out1 success done
- [ 0.056886] gxbb_mpll_clk: register mpll_clk_out2 success done
- [ 0.057077] clk_sys: register PLL sys_pll success done
- [ 0.057093] gxl_clk: [ xtal ] ->clockrate: 24000000Hz
- [ 0.057098] gxl_clk: [ 32Khz ] ->clockrate: 32000Hz
- [ 0.057103] gxl_clk: [ clk81 ] ->clockrate: 166666666Hz
- [ 0.057108] gxl_clk: [ fixed_pll ] ->clockrate: 2000000000Hz
- [ 0.057112] gxl_clk: [ fclk_div2 ] ->clockrate: 1000000000Hz
- [ 0.057117] gxl_clk: [ fclk_div3 ] ->clockrate: 666666666Hz
- [ 0.057121] gxl_clk: [ fclk_div4 ] ->clockrate: 500000000Hz
- [ 0.057125] gxl_clk: [ fclk_div5 ] ->clockrate: 400000000Hz
- [ 0.057129] gxl_clk: [ fclk_div7 ] ->clockrate: 285714285Hz
- [ 0.057154] gxl_clk: clock initialization complete
- [ 0.057350] clkmsr: Gxl msr_clk_reg0=ffffff800003a75c,msr_clk_reg2=ffffff800003c764
- [ 0.058768] aml_iomap: amlogic iomap probe done
- [ 0.058962] pinmux-gxl c1109880.pinmux: Init pinux probe!
- [ 0.059743] pinmux-gxl c1109880.pinmux: Probed amlogic pinctrl driver
- [ 0.059941] genirq: Setting trigger mode 8 for irq 241 failed (gic_set_type+0x0/0xc0)
- [ 0.059964] genirq: Setting trigger mode 8 for irq 242 failed (gic_set_type+0x0/0xc0)
- [ 0.060033] genirq: Setting trigger mode 8 for irq 241 failed (gic_set_type+0x0/0xc0)
- [ 0.060051] genirq: Setting trigger mode 8 for irq 242 failed (gic_set_type+0x0/0xc0)
- [ 0.063132] codec_mm has 2 memory regions
- [ 0.063150] codec_mm codec_mm.17: assigned reserved memory node linux,codec_mm_cma ok
- [ 0.063159] codec_mm codec_mm.17: assigned reserved memory node linux,codec_mm_reserved ok
- [ 0.063193] codec_mm has 2 memory regions
- [ 0.063202] codec_mm codec_mm.17: assigned reserved memory node linux,codec_mm_cma ok
- [ 0.063210] codec_mm codec_mm.17: assigned reserved memory node linux,codec_mm_reserved ok
- [ 0.064043] vpu: driver version: v03
- [ 0.064059] vpu: load vpu_clk: 666667000Hz(7)
- [ 0.064087] vpu: vpu_probe OK
- [ 0.064694] tv_vout: tvout_probe
- [ 0.064701] tv_vout: chrdev devno 265289728 for disp
- [ 0.064712] vout_notify: vout_register_server
- [ 0.064716] tv_vout: register tv module server ok
- [ 0.064832] tv_vout: create cdev tv
- [ 0.064837] tv_vout: tvout_probe OK
- [ 0.065103] canvas_probe reg=00000000c8838000,size=400
- [ 0.065117] canvas maped reg_base =ffffff800008e000
- [ 0.068543] rdma_probe
- [ 0.227753] bio: create slab <bio-0> at 0
- [ 0.228247] SCSI subsystem initialized
- [ 0.228423] usbcore: registered new interface driver usbfs
- [ 0.228455] usbcore: registered new interface driver hub
- [ 0.228515] usbcore: registered new device driver usb
- [ 0.229106] i2c-gpio i2c_gpio.37: using pins 172 (SDA) and 173 (SCL)
- [ 0.229183] pps_core: LinuxPPS API ver. 1 registered
- [ 0.229188] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
- [ 0.229201] PTP clock support registered
- [ 0.229386] hdmitx: system: amhdmitx_init
- [ 0.229391] hdmitx: system: Ver: 2014May6
- [ 0.229538] hdmitx: system: amhdmitx_probe
- [ 0.229731] hdmitx: system: not find match init-data
- [ 0.229738] hdmitx hpd irq = 89
- [ 0.230019] hdmitx20: Mapped PHY: 0xc0800000
- [ 0.230028] hdmitx20: Mapped PHY: 0xc1104400
- [ 0.230048] hdmitx20: Mapped PHY: 0xc8100000
- [ 0.230054] hdmitx20: Mapped PHY: 0xc8834000
- [ 0.230058] hdmitx20: Mapped PHY: 0xc883a000
- [ 0.230063] hdmitx20: Mapped PHY: 0xc883c000
- [ 0.230071] hdmitx20: Mapped PHY: 0xd0100000
- [ 0.230077] hdmitx20: Mapped PHY: 0xda83a000
- [ 0.230088] hdmitx: alread display in uboot 0x10
- [ 0.230123] avmute set to 1
- [ 0.230378] tv_vout: tv_set_current_vmode[919]fps_target_mode=16
- [ 0.230384] tv_vout: mode is 16,sync_duration_den=1,sync_duration_num=60
- [ 0.230396] tv_vout: already display in uboot
- [ 0.230400] vout_serve: vinfo mode is: 1080p60hz
- [ 0.230403] vout_serve: init mode 1080p60hz
- [ 0.230521] vout_serve: create_vout_fops OK
- [ 0.230525] vout_serve: create vout attribute OK
- [ 0.230529] vout_serve: meson_vout_probe OK
- [ 0.230631] logo: logo_init
- [ 0.230805] osd_rdma: osd_rdma_init: rdma_table p=0x76841000,op=0x76841000 , v=0xffffff80000a9000
- [ 0.230825] rdma_register, rdma_table_addr ffffff80000b9000 rdma_table_addr_phy 76842000 reg_buf ffffffc000236000
- [ 0.230830] rdma_register success, handle 1 table_size 4096
- [ 0.230835] osd_rdma: osd_rdma_init:osd reset rdma handle = 1.
- [ 0.230851] rdma_register, rdma_table_addr ffffff80000c9000 rdma_table_addr_phy 76843000 reg_buf ffffffc000237000
- [ 0.230855] rdma_register success, handle 2 table_size 4096
- [ 0.230859] osd_rdma: osd_rdma_init:osd rdma handle = 2.
- [ 0.230933] Advanced Linux Sound Architecture Driver Initialized.
- [ 0.232580] Switched to clocksource arch_sys_counter
- [ 0.237087] hdmitx: system: irq 80000002
- [ 0.243894] FS-Cache: Loaded
- [ 0.248118] NET: Registered protocol family 2
- [ 0.248608] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
- [ 0.248721] TCP bind hash table entries: 16384 (order: 6, 262144 bytes)
- [ 0.248942] TCP: Hash tables configured (established 16384 bind 16384)
- [ 0.249003] TCP: reno registered
- [ 0.249014] UDP hash table entries: 1024 (order: 3, 32768 bytes)
- [ 0.249058] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
- [ 0.249263] NET: Registered protocol family 1
- [ 0.249497] RPC: Registered named UNIX socket transport module.
- [ 0.249503] RPC: Registered udp transport module.
- [ 0.249506] RPC: Registered tcp transport module.
- [ 0.249510] RPC: Registered tcp NFSv4.1 backchannel transport module.
- [ 0.249830] pwm: probe ok
- [ 0.249981] wifi: power_on_pin_OD = 0;
- [ 0.249991] aml_wifi wifi.32: [wifi_dev_probe] no power_on_pin2
- [ 0.250018] aml_wifi wifi.32: [pwm_double_channel_conf_dt] pwm phandle val=25;pwm-channel1=4;pwm-channel2=12
- [ 0.250025] aml_wifi wifi.32: [pwm_double_channel_conf_dt] pwm_config1[0] = 30541
- [ 0.250031] aml_wifi wifi.32: [pwm_double_channel_conf_dt] pwm_config2[0] = 30518
- [ 0.250037] aml_wifi wifi.32: [pwm_double_channel_conf_dt] pwm_config1[1] = 15270
- [ 0.250043] aml_wifi wifi.32: [pwm_double_channel_conf_dt] pwm_config2[1] = 15259
- [ 0.250048] aml_wifi wifi.32: [pwm_double_channel_conf_dt] pwm_config1[2] = 6
- [ 0.250054] aml_wifi wifi.32: [pwm_double_channel_conf_dt] pwm_config2[2] = 9
- [ 0.250059] aml_wifi wifi.32: [pwm_double_channel_conf_dt] wifi pwm dt ok
- [ 0.250078] aml_wifi wifi.32: [pwm_double_channel_conf] wifi pwm conf ok
- [ 0.250119] aml_wifi wifi.32: [wifi_dev_probe] interrupt_pin=241
- [ 0.250125] aml_wifi wifi.32: [wifi_dev_probe] irq_num=100, irq_trigger_type=1
- [ 0.250131] aml_wifi wifi.32: [wifi_dev_probe] power_on_pin=240
- [ 0.250136] aml_wifi wifi.32: [wifi_dev_probe] clock_32k_pin=0
- [ 0.250264] aml_wifi wifi.32: [wifi_setup_dt] wifi_setup_dt
- [ 0.250290] aml_wifi wifi.32: [wifi_setup_dt] interrupt_pin(241)
- [ 0.250303] aml_wifi wifi.32: [wifi_setup_dt] power_on_pin(240)
- [ 0.250416] Unpacking initramfs...
- [ 0.333716] Freeing initrd memory: 2320K (ffffffc073c73000 - ffffffc073eb7000)
- [ 0.335497] futex hash table entries: 1024 (order: 4, 65536 bytes)
- [ 0.341285] squashfs: version 4.0 (2009/01/31) Phillip Lougher
- [ 0.341681] FS-Cache: Netfs 'nfs' registered for caching
- [ 0.342244] NFS: Registering the id_resolver key type
- [ 0.342271] Key type id_resolver registered
- [ 0.342276] Key type id_legacy registered
- [ 0.342285] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
- [ 0.342295] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
- [ 0.342723] FS-Cache: Netfs 'cifs' registered for caching
- [ 0.342957] Key type cifs.idmap registered
- [ 0.343083] msgmni has been set to 3576
- [ 0.343935] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246)
- [ 0.344006] io scheduler noop registered
- [ 0.344116] io scheduler bfq registered (default)
- [ 0.344121] BFQ I/O-scheduler: v7r8
- [ 0.344840] meson-rng c8834000.rng: hwrng registered
- [ 0.347008] loop: module loaded
- [ 0.347070] Loading iSCSI transport class v2.0-870.
- [ 0.347282] iscsi: registered transport (tcp)
- [ 0.347990] tun: Universal TUN/TAP device driver, 1.6
- [ 0.347995] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
- [ 0.351611] libphy: stmmac: probed
- [ 0.351623] eth0: PHY ID 01814400 at 8 IRQ 41 (stmmac-0:08) active
- [ 0.351904] PPP generic driver version 2.4.2
- [ 0.352030] NET: Registered protocol family 24
- [ 0.352081] usbcore: registered new interface driver smsc95xx
- [ 0.352298] platform c9000000.dwc3: Driver dwc3 requests probe deferral
- [ 0.352339] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
- [ 0.352344] ehci-h20ahb: H20AHB-EHCI Host Controller driver
- [ 0.352426] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
- [ 0.352557] usbcore: registered new interface driver usb-storage
- [ 0.352665] usbcore: registered new interface driver usbserial
- [ 0.352692] usbcore: registered new interface driver usbserial_generic
- [ 0.352714] usbserial: USB Serial support registered for generic
- [ 0.352737] usbcore: registered new interface driver pl2303
- [ 0.352757] usbserial: USB Serial support registered for pl2303
- [ 0.352983] amlogic-new-usb2 d0078000.usb2phy: USB2 phy probe:phy_mem:0xd0078000, iomap phy_base:0xffffff80000ee000
- [ 0.353074] amlogic-new-usb3 d0078080.usb3phy: This phy has no usb port
- [ 0.353095] amlogic-new-usb3 d0078080.usb3phy: USB3 phy probe:phy_mem:0xd0078080, iomap phy_base:0xffffff80000fa080
- [ 0.353249] mousedev: PS/2 mouse device common for all mice
- [ 0.353305] i2c /dev entries driver
- [ 0.353714] device-mapper: uevent: version 1.0.3
- [ 0.353897] device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com
- [ 0.354171] device-mapper: multipath: version 1.6.0 loaded
- [ 0.354179] device-mapper: multipath round-robin: version 1.0.0 loaded
- [ 0.354495] ledtrig-cpu: registered to indicate activity on CPUs
- [ 0.354543] hidraw: raw HID events driver (C) Jiri Kosina
- [ 0.355250] usbcore: registered new interface driver usbhid
- [ 0.355254] usbhid: USB HID core driver
- [ 0.355337] ashmem: initialized
- [ 0.355586] meson_uart c81004c0.serial: ==uart0 reg addr = ffffff80000fc4c0
- [ 0.355610] c81004c0.serial: ttyS0 at MMIO 0xc81004c0 (irq = 225, base_baud = 1500000) is a meson_uart
- [ 0.355625] meson_uart c81004c0.serial: ttyS0 use xtal(8M) 24000000 change 0 to 115200
- [ 0.399606] console [ttyS0] enabled
- [ 0.399849] meson_uart c11084c0.serial: ==uart1 reg addr = ffffff80000fe4c0
- [ 0.399871] c11084c0.serial: ttyS1 at MMIO 0xc11084c0 (irq = 58, base_baud = 1500000) is a meson_uart
- [ 0.400241] hdmitx: system: hdmitx_hdcp_init
- [ 0.400654] aml_vrtc rtc.31: rtc core: registered aml_vrtc as rtc0
- [ 0.400775] secmon has 1 memory regions
- [ 0.400798] secmon: share in base: 0xffffff800011a000, share out base: 0xffffff800011c000
- [ 0.400806] secmon secmon.4: assigned reserved memory node linux,secmon ok
- [ 0.400809] secmon: probe done
- [ 0.400975] storage: storage in base: 0xffffff8001800000
- [ 0.400979] storage: storage out base: 0xffffff8001880000
- [ 0.400983] storage: storage block base: 0xffffff8001900000
- [ 0.400986] storage: probe done!
- [ 0.401162] aml_sd_emmc_probe: line 3594
- [ 0.401167] mmc driver version: 1.07, 2015-01-21: fix a bug in tuning which caused eMMC data CRC error
- [ 0.401564] aml_sd_emmc_reg_init 1149
- [ 0.401660] get property: ocr_avail, value:0x00200080
- [ 0.401665] get property: f_min, value:300000
- [ 0.401670] get property: f_max, value:100000000
- [ 0.401676] get property: max_req_size, value:0x00020000
- [ 0.401685] get property: pinname, str:emmc
- [ 0.401691] get property: card_type, value:1
- [ 0.401705] get property: gpio_dat3, str:
- [ 0.401711] get property: hw_reset, str:
- [ 0.401739] emmc:pdata->caps = c0000d47
- [ 0.401747] emmc:pdata->caps2 = 18060
- [ 0.401751] emmc:pdata->pm_caps = 0
- [ 0.401762] storage 1, boot 1
- [ 0.401765] get_storage_dev return 1
- [ 0.442605] [aml_sd_emmc_probe] aml_sd_emmc_probe() success!
- [ 0.442629] aml_sd_emmc_probe: line 3594
- [ 0.448102] aml_sd_emmc_reg_init 1149
- [ 0.448253] get property: ocr_avail, value:0x00200080
- [ 0.448259] get property: f_min, value:400000
- [ 0.448263] get property: f_max, value:100000000
- [ 0.448269] get property: max_req_size, value:0x00020000
- [ 0.448273] get property: irq_in, value:3
- [ 0.448278] get property: irq_out, value:5
- [ 0.448290] get property: gpio_cd, str:
- [ 0.448296] get property: pinname, str:sd
- [ 0.448301] get property: jtag_pin, str:
- [ 0.448307] get property: card_type, value:5
- [ 0.448314] get property: gpio_dat3, str:
- [ 0.448328] sd:pdata->caps = 7
- [ 0.448333] sd:pdata->caps2 = 0
- [ 0.448337] sd:pdata->pm_caps = 0
- [ 0.482752] [aml_is_card_insert] card OUT
- [ 0.482860] [aml_is_card_insert] card OUT
- [ 0.482871] [aml_sd_emmc_probe] aml_sd_emmc_probe() success!
- [ 0.482899] aml_sd_emmc_probe: line 3594
- [ 0.483128] aml_sd_emmc_reg_init 1149
- [ 0.483184] get property: ocr_avail, value:0x00200080
- [ 0.483189] get property: f_min, value:400000
- [ 0.483194] get property: f_max, value:200000000
- [ 0.483199] get property: max_req_size, value:0x00020000
- [ 0.483208] get property: pinname, str:sdio
- [ 0.483214] get property: card_type, value:3
- [ 0.483247] sdio:pdata->caps = 7810f
- [ 0.483251] sdio:pdata->caps2 = 0
- [ 0.483256] sdio:pdata->pm_caps = 1
- [ 0.522590] [aml_sd_emmc_probe] aml_sd_emmc_probe() success!
- [ 0.522780] ion_dev has 1 memory regions
- [ 0.526541] fb: osd_init_module
- [ 0.526633] fb: viu vsync irq: 35
- [ 0.526641] meson-fb has 1 memory regions
- [ 0.526667] meson-fb meson-fb.14: assigned reserved memory node linux,meson-fb ok
- [ 0.526684] fb: osd_probe vinfo:ffffffc001d59990
- [ 0.526690] fb: init fbdev bpp is:32
- [ 0.527153] fb: Frame buffer memory assigned at
- [ 0.527153] fb: 0, phy: 0x000000007d100000, vir:0xffffff8001b00000, size=24576K
- [ 0.527157] fb: ---------------clear fb0 memory ffffff8001b00000
- [ 0.537375] fb: osd[0] canvas.idx =0x40
- [ 0.537401] fb: osd[0] canvas.addr=0x7d100000
- [ 0.537403] fb: osd[0] canvas.width=7680
- [ 0.537404] fb: osd[0] canvas.height=3240
- [ 0.537406] fb: osd[0] frame.width=1920
- [ 0.537408] fb: osd[0] frame.height=1080
- [ 0.550923] emmc: BKOPS_EN bit is not set
- [ 0.557163] emmc: trying cali 0-th time(s)
- [ 0.558867] emmc: delay[0]= 3600 padding= 2, bidx=3
- [ 0.558869] emmc: delay[1]= 3800 padding= 1, bidx=3
- [ 0.558872] emmc: delay[2]= 3400 padding= 3, bidx=3
- [ 0.558874] emmc: delay[3]= 3800 padding= 1, bidx=3
- [ 0.558876] emmc: delay[4]= 4000 padding= 5, bidx=4
- [ 0.558878] emmc: delay[5]= 3800 padding= 1, bidx=3
- [ 0.558880] emmc: delay[6]= 3800 padding= 1, bidx=3
- [ 0.558882] emmc: delay[7]= 3800 padding= 1, bidx=3
- [ 0.558884] emmc: calibration result @ 0: max(4000), min(3400)
- [ 0.558887] emmc: line_delay =0x11101312, max_cal_result =4000
- [ 0.558889] emmc: base_index_max 4, base_index_min 3
- [ 0.558893] emmc: clk 100000000 SDR mode tuning start
- [ 0.559123] emmc: rx_tuning_result[0] = 10
- [ 0.559349] emmc: rx_tuning_result[1] = 10
- [ 0.559574] emmc: rx_tuning_result[2] = 10
- [ 0.559798] emmc: rx_tuning_result[3] = 10
- [ 0.560023] emmc: rx_tuning_result[4] = 10
- [ 0.560249] emmc: rx_tuning_result[5] = 10
- [ 0.560474] emmc: rx_tuning_result[6] = 10
- [ 0.560701] emmc: rx_tuning_result[7] = 10
- [ 0.560949] emmc: rx_tuning_result[9] = 10
- [ 0.560951] emmc: best_win_start =9, best_win_size =9
- [ 0.560954] emmc: sd_emmc_regs->gclock=0x100024a,sd_emmc_regs->gadjust=0x32000
- [ 0.560957] emmc: gclock =0x100024a, gdelay=0x11101312, gadjust=0x32000
- [ 0.561043] emmc: support driver strength type 1
- [ 0.561085] emmc: try set sd/emmc to DDR mode
- [ 0.561088] emmc: try set sd/emmc to DDR mode
- [ 0.561164] emmc: new HS400 MMC card at address 0001
- [ 0.561512] emmc: clock 100000000, 8-bit-bus-width
- [ 0.561513] mmcblk0: emmc:0001 AJNB4R 14.5 GiB
- [ 0.561680] mmcblk0boot0: emmc:0001 AJNB4R partition 1 4.00 MiB
- [ 0.561811] mmcblk0boot1: emmc:0001 AJNB4R partition 2 4.00 MiB
- [ 0.561939] mmcblk0rpmb: emmc:0001 AJNB4R partition 3 4.00 MiB
- [ 0.562527] mmcblk0: unknown partition table
- [ 0.563073] [mmc_read_partition_tbl] mmc read partition OK!
- [ 0.563074] add_emmc_partition
- [ 0.563200] [mmcblk0p01] bootloader offset 0x000000000000, size 0x000000400000
- [ 0.563290] [mmcblk0p02] reserved offset 0x000002400000, size 0x000004000000
- [ 0.563362] [mmcblk0p03] cache offset 0x000006c00000, size 0x000020000000
- [ 0.563438] [mmcblk0p04] env offset 0x000027400000, size 0x000000800000
- [ 0.563511] [mmcblk0p05] logo offset 0x000028400000, size 0x000002000000
- [ 0.563588] [mmcblk0p06] recovery offset 0x00002ac00000, size 0x000002000000
- [ 0.563658] [mmcblk0p07] rsv offset 0x00002d400000, size 0x000000800000
- [ 0.563731] [mmcblk0p08] tee offset 0x00002e400000, size 0x000000800000
- [ 0.563804] [mmcblk0p09] crypt offset 0x00002f400000, size 0x000002000000
- [ 0.563876] [mmcblk0p10] misc offset 0x000031c00000, size 0x000002000000
- [ 0.563947] [mmcblk0p11] instaboot offset 0x000034400000, size 0x000020000000
- [ 0.564022] [mmcblk0p12] boot offset 0x000054c00000, size 0x000002000000
- [ 0.564105] [mmcblk0p13] system offset 0x000057400000, size 0x000040000000
- [ 0.564178] [mmcblk0p14] data offset 0x000097c00000, size 0x00030c200000
- [ 0.564199] card key: card_blk_probe.
- [ 0.564203] emmc_key_init:527 emmc key lba_start:0x12020,lba_end:0x12220
- [ 0.564206] emmc key: emmc_key_init:552 ok.
- [ 0.566455] amlmmc_dtb_init: register dtb chardev
- [ 0.566455] calc 55e7b680, store 55e7b680
- [ 0.568530] calc 55e7b680, store 55e7b680
- [ 0.568533] total valid 2
- [ 0.568751] amlmmc_dtb_init: register dtb chardev OK
- [ 0.568751] Exit aml_emmc_partition_ops OK.
- [ 0.569465] mmcblk0boot1: unknown partition table
- [ 0.570039] mmcblk0boot0: unknown partition table
- [ 0.570182] clear_emmc_wait_flag
- [ 0.592692] Console: switching to colour frame buffer device 240x67
- [ 0.618849] ------------[ cut here ]------------
- [ 0.618868] WARNING: CPU: 2 PID: 1 at drivers/base/core.c:549 device_create_file+0xa4/0xc0()
- [ 0.618872] Attribute scale_width: write permission without 'store'
- [ 0.618876] Modules linked in:
- [ 0.618884] CPU: 2 PID: 1 Comm: swapper/0 Not tainted 3.14.29-99-osmc #1
- [ 0.618889] Call trace:
- [ 0.618898] [<ffffffc001087ae8>] dump_backtrace+0x0/0x128
- [ 0.618899] hdmitx: plugin
- [ 0.618907] [<ffffffc001087c30>] show_stack+0x20/0x30
- [ 0.618915] [<ffffffc0018b2348>] dump_stack+0x78/0x94
- [ 0.618922] [<ffffffc0010943e8>] warn_slowpath_common+0x90/0xc0
- [ 0.618929] [<ffffffc001094478>] warn_slowpath_fmt+0x60/0x78
- [ 0.618936] [<ffffffc00149ade0>] device_create_file+0xa0/0xc0
- [ 0.618944] [<ffffffc0016601a8>] osd_probe+0x3c0/0x620
- [ 0.618953] [<ffffffc0014a20a0>] platform_drv_probe+0x28/0x68
- [ 0.618959] [<ffffffc00149fe8c>] really_probe+0x74/0x228
- [ 0.618965] [<ffffffc0014a0160>] __driver_attach+0xb0/0xb8
- [ 0.618971] [<ffffffc00149dff4>] bus_for_each_dev+0x6c/0xb0
- [ 0.618977] [<ffffffc00149f944>] driver_attach+0x2c/0x40
- [ 0.618984] [<ffffffc00149f4ec>] bus_add_driver+0x104/0x200
- [ 0.618990] [<ffffffc0014a0934>] driver_register+0x64/0x128
- [ 0.618997] [<ffffffc0014a2064>] __platform_driver_register+0x6c/0x80
- [ 0.619005] [<ffffffc001c170c0>] osd_init_module+0x11c/0x164
- [ 0.619011] [<ffffffc001081698>] do_one_initcall+0xe0/0x148
- [ 0.619019] [<ffffffc001be49b4>] kernel_init_freeable+0x198/0x23c
- [ 0.619027] [<ffffffc0018aff9c>] kernel_init+0x1c/0xe0
- [ 0.619045] ---[ end trace d19b6386b5314cd2 ]---
- [ 0.619054] ------------[ cut here ]------------
- [ 0.619062] WARNING: CPU: 2 PID: 1 at drivers/base/core.c:549 device_create_file+0xa4/0xc0()
- [ 0.619066] Attribute scale_height: write permission without 'store'
- [ 0.619070] Modules linked in:
- [ 0.619076] CPU: 2 PID: 1 Comm: swapper/0 Tainted: G W 3.14.29-99-osmc #1
- [ 0.619080] Call trace:
- [ 0.619086] [<ffffffc001087ae8>] dump_backtrace+0x0/0x128
- [ 0.619092] [<ffffffc001087c30>] show_stack+0x20/0x30
- [ 0.619097] [<ffffffc0018b2348>] dump_stack+0x78/0x94
- [ 0.619104] [<ffffffc0010943e8>] warn_slowpath_common+0x90/0xc0
- [ 0.619110] [<ffffffc001094478>] warn_slowpath_fmt+0x60/0x78
- [ 0.619116] [<ffffffc00149ade0>] device_create_file+0xa0/0xc0
- [ 0.619123] [<ffffffc0016601a8>] osd_probe+0x3c0/0x620
- [ 0.619130] [<ffffffc0014a20a0>] platform_drv_probe+0x28/0x68
- [ 0.619135] [<ffffffc00149fe8c>] really_probe+0x74/0x228
- [ 0.619141] [<ffffffc0014a0160>] __driver_attach+0xb0/0xb8
- [ 0.619147] [<ffffffc00149dff4>] bus_for_each_dev+0x6c/0xb0
- [ 0.619153] [<ffffffc00149f944>] driver_attach+0x2c/0x40
- [ 0.619159] [<ffffffc00149f4ec>] bus_add_driver+0x104/0x200
- [ 0.619165] [<ffffffc0014a0934>] driver_register+0x64/0x128
- [ 0.619171] [<ffffffc0014a2064>] __platform_driver_register+0x6c/0x80
- [ 0.619177] [<ffffffc001c170c0>] osd_init_module+0x11c/0x164
- [ 0.619182] [<ffffffc001081698>] do_one_initcall+0xe0/0x148
- [ 0.619188] [<ffffffc001be49b4>] kernel_init_freeable+0x198/0x23c
- [ 0.619194] [<ffffffc0018aff9c>] kernel_init+0x1c/0xe0
- [ 0.619198] ---[ end trace d19b6386b5314cd3 ]---
- [ 0.619421] ------------[ cut here ]------------
- [ 0.619432] WARNING: CPU: 1 PID: 1 at drivers/base/core.c:549 device_create_file+0xa4/0xc0()
- [ 0.619436] Attribute scale_width: write permission without 'store'
- [ 0.619439] Modules linked in:
- [ 0.619446] CPU: 1 PID: 1 Comm: swapper/0 Tainted: G W 3.14.29-99-osmc #1
- [ 0.619449] Call trace:
- [ 0.619456] [<ffffffc001087ae8>] dump_backtrace+0x0/0x128
- [ 0.619462] [<ffffffc001087c30>] show_stack+0x20/0x30
- [ 0.619468] [<ffffffc0018b2348>] dump_stack+0x78/0x94
- [ 0.619475] [<ffffffc0010943e8>] warn_slowpath_common+0x90/0xc0
- [ 0.619481] [<ffffffc001094478>] warn_slowpath_fmt+0x60/0x78
- [ 0.619488] [<ffffffc00149ade0>] device_create_file+0xa0/0xc0
- [ 0.619495] [<ffffffc0016601a8>] osd_probe+0x3c0/0x620
- [ 0.619501] [<ffffffc0014a20a0>] platform_drv_probe+0x28/0x68
- [ 0.619508] [<ffffffc00149fe8c>] really_probe+0x74/0x228
- [ 0.619514] [<ffffffc0014a0160>] __driver_attach+0xb0/0xb8
- [ 0.619519] [<ffffffc00149dff4>] bus_for_each_dev+0x6c/0xb0
- [ 0.619525] [<ffffffc00149f944>] driver_attach+0x2c/0x40
- [ 0.619531] [<ffffffc00149f4ec>] bus_add_driver+0x104/0x200
- [ 0.619537] [<ffffffc0014a0934>] driver_register+0x64/0x128
- [ 0.619544] [<ffffffc0014a2064>] __platform_driver_register+0x6c/0x80
- [ 0.619550] [<ffffffc001c170c0>] osd_init_module+0x11c/0x164
- [ 0.619555] [<ffffffc001081698>] do_one_initcall+0xe0/0x148
- [ 0.619561] [<ffffffc001be49b4>] kernel_init_freeable+0x198/0x23c
- [ 0.619568] [<ffffffc0018aff9c>] kernel_init+0x1c/0xe0
- [ 0.619572] ---[ end trace d19b6386b5314cd4 ]---
- [ 0.619578] ------------[ cut here ]------------
- [ 0.619586] WARNING: CPU: 1 PID: 1 at drivers/base/core.c:549 device_create_file+0xa4/0xc0()
- [ 0.619590] Attribute scale_height: write permission without 'store'
- [ 0.619593] Modules linked in:
- [ 0.619599] CPU: 1 PID: 1 Comm: swapper/0 Tainted: G W 3.14.29-99-osmc #1
- [ 0.619602] Call trace:
- [ 0.619608] [<ffffffc001087ae8>] dump_backtrace+0x0/0x128
- [ 0.619614] [<ffffffc001087c30>] show_stack+0x20/0x30
- [ 0.619620] [<ffffffc0018b2348>] dump_stack+0x78/0x94
- [ 0.619626] [<ffffffc0010943e8>] warn_slowpath_common+0x90/0xc0
- [ 0.619632] [<ffffffc001094478>] warn_slowpath_fmt+0x60/0x78
- [ 0.619639] [<ffffffc00149ade0>] device_create_file+0xa0/0xc0
- [ 0.619645] [<ffffffc0016601a8>] osd_probe+0x3c0/0x620
- [ 0.619652] [<ffffffc0014a20a0>] platform_drv_probe+0x28/0x68
- [ 0.619657] [<ffffffc00149fe8c>] really_probe+0x74/0x228
- [ 0.619663] [<ffffffc0014a0160>] __driver_attach+0xb0/0xb8
- [ 0.619669] [<ffffffc00149dff4>] bus_for_each_dev+0x6c/0xb0
- [ 0.619675] [<ffffffc00149f944>] driver_attach+0x2c/0x40
- [ 0.619681] [<ffffffc00149f4ec>] bus_add_driver+0x104/0x200
- [ 0.619687] [<ffffffc0014a0934>] driver_register+0x64/0x128
- [ 0.619693] [<ffffffc0014a2064>] __platform_driver_register+0x6c/0x80
- [ 0.619699] [<ffffffc001c170c0>] osd_init_module+0x11c/0x164
- [ 0.619704] [<ffffffc001081698>] do_one_initcall+0xe0/0x148
- [ 0.619710] [<ffffffc001be49b4>] kernel_init_freeable+0x198/0x23c
- [ 0.619716] [<ffffffc0018aff9c>] kernel_init+0x1c/0xe0
- [ 0.619720] ---[ end trace d19b6386b5314cd5 ]---
- [ 0.619777] fb: set osd0 reverse as NONE
- [ 0.633187] fb: osd probe OK
- [ 0.633319] ge2d: ge2d_init_module
- [ 0.633329] ge2d: ge2d_dev major:241
- [ 0.633553] ge2d: ge2d clock is 400 MHZ
- [ 0.633560] ge2d: ge2d: pdev=ffffffc010351800, irq=182, rstc=0xffffffc061675fc0, clk=ffffffc010314e00
- [ 0.633596] ge2d: mapped phy: 0xd0160000
- [ 0.633604] ge2d: ge2d start monitor
- [ 0.633695] ge2d: ge2d workqueue monitor start
- [ 0.633818] sysled: module init
- [ 0.633910] sysled: led_gpio = 228
- [ 0.633914] sysled: active_low = 0
- [ 0.633979] sysled: module probed ok
- [ 0.634126] pwmled: module init
- [ 0.634317] codec:Amlogic A/V streaming port init
- [ 0.634959] codec:get gate demux control ok ffffffc06166ae80
- [ 0.634967] codec:get gate parser_top control ok ffffffc06166af00
- [ 0.634974] codec:get gate vpu_intr control ok ffffffc06166af80
- [ 0.634986] codec:get gate vdec control ok ffffffc061667000
- [ 0.635435] codec:[tsync_pcr_init]init success.
- [ 0.635522] codec:amvideocap_probe,amvideocap
- [ 0.635528] codec:use cma buf.
- [ 0.636396] codec:vdec_request_irq ffffffc0016c13c8, vsync
- [ 0.636557] codec:create_ge2d_work_queue video task ok
- [ 0.636899] rdma_register, rdma_table_addr ffffff8000271000 rdma_table_addr_phy 76850000 reg_buf ffffffc0616b0000
- [ 0.636906] rdma_register success, handle 3 table_size 32768
- [ 0.636911] video_rdma:rdma_init video rdma handle = 3.
- [ 0.636918] codec:used fix clk for vdec clk source!
- [ 0.636925] codec:register clk_set_setting cpu[33]
- [ 0.637257] DI: di_module_init ok.
- [ 0.637270] DI: di_module_init: major 237
- [ 0.637419] DI: di_probe
- [ 0.637545] deinterlace has 1 memory regions
- [ 0.637579] DI: di reveser memory 0x7b300000, size 30MB.
- [ 0.637589] deinterlace deinterlace.24: assigned reserved memory node linux,di ok
- [ 0.637596] DI-di_probe: get flag_cma error.
- [ 0.637731] di_irq:78,timerc_irq:38
- [ 0.637845] rdma_register, rdma_table_addr ffffff800017b000 rdma_table_addr_phy 7684a000 reg_buf ffffffc06168a000
- [ 0.637851] rdma_register success, handle 4 table_size 8192
- [ 0.637854] DI: di_probe allocate rdma channel 4.
- [ 0.637859] DI: DI hw version 2.
- [ 0.637871] 0x000000db:Y=db,U=0,V=0
- [ 0.637875] 0x000000dc:Y=dc,U=0,V=0
- [ 0.637879] 0x000000dd:Y=dd,U=0,V=0
- [ 0.637883] 0x000000de:Y=de,U=0,V=0
- [ 0.637887] 0x000000df:Y=df,U=0,V=0
- [ 0.637891] 0x000000e0:Y=e0,U=0,V=0
- [ 0.637894] 0x000000e1:Y=e1,U=0,V=0
- [ 0.637898] 0x000000e2:Y=e2,U=0,V=0
- [ 0.637902] 0x000000e3:Y=e3,U=0,V=0
- [ 0.637906] 0x000000f0:Y=f0,U=0,V=0
- [ 0.637912] 0x000000f1:Y=f1,U=0,V=0
- [ 0.637916] 0x000000f2:Y=f2,U=0,V=0
- [ 0.637920] 0x000000f3:Y=f3,U=0,V=0
- [ 0.637924] 0x000000f4:Y=f4,U=0,V=0
- [ 0.637928] 0x000000f5:Y=f5,U=0,V=0
- [ 0.637932] 0x000000f6:Y=f6,U=0,V=0
- [ 0.637938] 0x000000f7:Y=f7,U=0,V=0
- [ 0.637942] 0x000000f8:Y=f8,U=0,V=0
- [ 0.637946] 0x000000f9:Y=f9,U=0,V=0
- [ 0.637950] 0x000000fa:Y=fa,U=0,V=0
- [ 0.637954] 0x000000fb:Y=fb,U=0,V=0
- [ 0.637958] 0x000000fc:Y=fc,U=0,V=0
- [ 0.638327] efusekeynum: 4
- [ 0.638338] efusekeyname: mac offset: 0 size: 6
- [ 0.638346] efusekeyname: mac_bt offset: 6 size: 6
- [ 0.638354] efusekeyname: mac_wifi offset: 12 size: 6
- [ 0.638362] efusekeyname: usid offset: 18 size: 16
- [ 0.638497] efuse efuse.9: probe OK!
- [ 0.638690] key unify config unifykey-num is 14
- [ 0.638738] key unify fact unifykey-num is 14
- [ 0.638744] aml_unifykeys_probe:1280=============unifykey_devno:eb00000
- [ 0.638841] 6unifykey: device unifykeys created ok
- [ 0.638880] 6aml_unifykeys_init done!
- [ 0.638884] PPMGRDRV: warn: ppmgr module init func called
- [ 0.638935] PPMGRDRV: err: ppmgr_driver_probe called
- [ 0.641592] ppmgr has 1 memory regions
- [ 0.641614] PPMGRDRV: info: ppmgr_dev major:234
- [ 0.641741] PPMGRDRV: info: ppmgr_probe done
- [ 0.641870] amlogic rfkill init
- [ 0.641920] enter bt_probe of_node
- [ 0.641932] not get gpio_en
- [ 0.641936] power on valid level is high
- [ 0.641941] bt: power_on_pin_OD = 0;
- [ 0.641952] driving bt gpio
- [ 0.674840] EDID Parser:
- [ 0.675216] hdmitx: get dtd0 vic: 16
- [ 0.675224] hdmitx: get dtd1 vic: 20
- [ 0.675251] hdmitx: get dtd2 vic: 5
- [ 0.675256] hdmitx: edid: find IEEEOUT
- [ 0.675262] hdmitx: edid: check sum valid
- [ 0.675265] hdmitx: edid: check sum valid
- [ 0.675272] hdmitx: update rx hdr info 0 at edid parsing
- [ 0.675278] hdmitx: edid: check sum valid
- [ 0.675281] hdmitx: edid: check sum valid
- [ 0.675286] hdmitx: edid: blk0 raw data
- [ 0.675325] 00ffffffffffff00412f00000101010100140103806639780aee91a3544c9926
- 0f5054bdef80714f81c0810081809500a9c0b3000101023a801871382d40582c
- 4500a05a0000001e011d80d0721c1620102c2580a05a0000009e000000fd0018
- 4b0f5117000a202020202020000000fc005653582d3932300a202020202001bc
- [ 0.675338] hdmitx: edid: blk1 raw data
- [ 0.675376] 02034af153901f04130514031220212207160f241e260b1a3b097f070f7f0715
- 07503e1ec04d02005706005f7e01677e00771f03834f00006a030c002100b82d
- 218000e2000fe3050301011d8018711c1620582c2500a05a0000009e011d00bc
- 52d01e20b8285540a05a0000001e00000000000000000000000000000000001e
- [ 0.675406] [RX]-receive ksv list len:1,depth:1,cas:0,dev:0
- [ 0.675414] hdmitx: video: get current mode: 1080p60hz
- [ 0.675418] hdmitx: update rx hdr info 0
- [ 0.675422] hdmitx: update physcial size: 1020 570
- [ 0.675441] hdmitx: system: [set_disp_mode_auto] ALREADY init VIC = 16
- [ 0.675449] hdmtix: setting audio 1
- [ 0.675461] hdmitx tx_aud_src = 0
- [ 0.675482] hdmitx: audio: Audio Type: #0
- [ 0.675491] hdmitx: fs = 0, cd = 4, tmds_clk = 148500
- [ 0.675495] hdmitx aud_n_para = 6144
- [ 0.675515] hdmitx set channel status
- [ 1.472680] audio_dsp: [dsp]register dsp to char divece(257)
- [ 1.473032] amaudio: amaudio: driver amaudio succuess!
- [ 1.473242] [RX]-hdmirx: hdmirx_init.
- [ 1.473247] ESM HLD: Initializing...
- [ 1.473251] ESM HLD: Registering device range 'esm_rx'...
- [ 1.473258] ESM HLD: Device range 'esm_rx' has been registered.
- [ 1.473262] ESM HLD: Creating class /sys/class/elliptic_rx...
- [ 1.473277] ESM HLD: The class /sys/class/elliptic_rx has been created.
- [ 1.473280] ESM HLD: Creating device 'esm_rx'...
- [ 1.473351] ESM HLD: Device 'esm_rx' has been created.
- [ 1.473355] ESM HLD: Done initializing the HLD driver.
- [ 1.473359] module init
- [ 1.473440]
- VECM probe start
- [ 1.473580] aml_vecm_probe: ok
- [ 1.473826] saradc c1108680.saradc: initialized by BL30
- [ 1.473840] saradc c1108680.saradc: calibration start:
- [ 1.473893] saradc c1108680.saradc: nominal=0, value=3
- [ 1.473946] saradc c1108680.saradc: nominal=256, value=252
- [ 1.473999] saradc c1108680.saradc: nominal=512, value=501
- [ 1.474051] saradc c1108680.saradc: nominal=768, value=751
- [ 1.474104] saradc c1108680.saradc: nominal=1023, value=999
- [ 1.474109] saradc c1108680.saradc: calibration end: coef=4202
- [ 1.474163] remote: Driver init
- [ 1.474309] gpio-key gpio_keypad.47: gpio_key: 0 name(power) pin()
- [ 1.474316] gpio-key gpio_keypad.47: amlogic_gpio_name_map_num pin 0!::
- [ 1.474328] gpio-key gpio_keypad.47: gpio_key: 0 power(147)
- [ 1.474357] gpio-key gpio_keypad.47: start setup_timer
- [ 1.474367] gpio-key gpio_keypad.47: power key(116) registed.
- [ 1.474471] input: gpio_keypad as /devices/gpio_keypad.47/input/input0
- [ 1.474578] gpio-key gpio_keypad.47: gpio keypad register input device completed.
- [ 1.474589] input input0: gpio keypad major:231
- [ 1.474717] cpuinfo: probe done
- [ 1.475158] input: cec_input as /devices/virtual/input/input1
- [ 1.475338] cectx aocec: aml_cec_probe(): no hdmirx reg resource
- [ 1.476001] cectx aocec: aml_cec_probe(): no hhi reg resource
- [ 1.481936] cectx aocec: aml_cec_probe(): can't find hdmirx
- [ 1.488753] cec: wake up flag:0
- [ 1.489624] aml_codec_T9015 c8832000.t9015: aml_T9015_audio_codec_probe
- [ 1.490410] aml-i2s-dai I2S.39: I2S Mic is in platform!
- [ 1.490557] aml_pcm_dai: pcm mode detection =1
- [ 1.572596] input input0: key 116 up
- [ 1.692759] aml_snd_card: headphone detection disable=1
- [ 1.692767] aml_snd_card: no spk event delay time set
- [ 1.693274] aml_snd_m8_card aml_m8_snd.46: T9015-audio-hifi <-> I2S.39 mapping ok
- [ 1.693601] aml_snd_m8_card aml_m8_snd.46: dit-hifi <-> SPDIF.40 mapping ok
- [ 1.693649] aml_pcm: enter aml_pcm_new dai->name: PCM.41 dai->id: 0
- [ 1.693758] aml_snd_m8_card aml_m8_snd.46: pcm2bt-pcm <-> PCM.41 mapping ok
- [ 1.693779] aml_snd_m8_card aml_m8_snd.46: ASoC: no source widget found for LOUTL
- [ 1.695939] aml_snd_m8_card aml_m8_snd.46: ASoC: Failed to add route LOUTL -> direct -> Ext Spk
- [ 1.704779] aml_snd_m8_card aml_m8_snd.46: ASoC: no source widget found for LOUTR
- [ 1.712326] aml_snd_m8_card aml_m8_snd.46: ASoC: Failed to add route LOUTR -> direct -> Ext Spk
- [ 1.722206] TCP: cubic registered
- [ 1.722626] NET: Registered protocol family 10
- [ 1.723284] NET: Registered protocol family 17
- [ 1.723364] Key type dns_resolver registered
- [ 1.724649] Registering SWP/SWPB emulation handler
- [ 1.724992] registered taskstats version 1
- [ 1.725452] regulator-dummy: disabling
- [ 1.728376] aml_snd_card: audio use jtag pinmux as i2s output, read val =0
- [ 2.433948] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
- [ 2.433969] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1
- [ 2.434384] xhci-hcd xhci-hcd.0.auto: irq 62, io mem 0xc9000000
- [ 2.434497] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
- [ 2.434504] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 2.434509] usb usb1: Product: xHCI Host Controller
- [ 2.434515] usb usb1: Manufacturer: Linux 3.14.29-99-osmc xhci-hcd
- [ 2.434520] usb usb1: SerialNumber: xhci-hcd.0.auto
- [ 2.434872] hub 1-0:1.0: USB hub found
- [ 2.434901] hub 1-0:1.0: 2 ports detected
- [ 2.435055] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
- [ 2.435068] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2
- [ 2.435179] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
- [ 2.435186] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 2.435192] usb usb2: Product: xHCI Host Controller
- [ 2.435197] usb usb2: Manufacturer: Linux 3.14.29-99-osmc xhci-hcd
- [ 2.435203] usb usb2: SerialNumber: xhci-hcd.0.auto
- [ 2.435473] hub 2-0:1.0: USB hub found
- [ 2.435491] hub 2-0:1.0: config failed, hub doesn't have any ports! (err -19)
- [ 2.437558] console [netcon0] enabled
- [ 2.437562] netconsole: network logging started
- [ 2.437649] aml_vrtc rtc.31: setting system clock to 2015-01-01 00:00:07 UTC (1420070407)
- [ 2.438529] cpufreq-scpi cpufreq-meson.7: enter cpufreq
- [ 2.438561] cpufreq-scpi cpufreq-meson.7: probe cpufreq okay
- [ 2.440561] gxbb_pm: enter meson_pm_probe!
- [ 2.440589] gxbb_pm: meson_pm_probe done
- [ 2.440937] cpucore_cooling_register, max_cpu_core_num:4
- [ 2.455825] aml_istbt_dev_ready NULL
- [ 2.455942] ALSA device list:
- [ 2.455946] #0: AML-M8AUDIO
- [ 2.456356] Freeing unused kernel memory: 980K (ffffffc001be4000 - ffffffc001cd9000)
- [ 2.479572] fb: osd[0] canvas.idx =0x40
- [ 2.479573] fb: osd[0] canvas.addr=0x7d100000
- [ 2.479576] fb: osd[0] canvas.width=7680
- [ 2.479577] fb: osd[0] canvas.height=2160
- [ 2.479579] fb: osd[0] frame.width=1920
- [ 2.479580] fb: osd[0] frame.height=1080
- [ 2.507272] fb: Frame buffer memory assigned at
- [ 2.507285] fb: 1, phy: 0x000000007e900000, vir:0xffffff8003580000, size=1024K
- [ 2.507293] fb: fb1 open, logo index:1
- [ 2.533312] codec:free_alloced_keep_buffer (null). (null). (null)
- [ 2.533451] fb: osd[0] enable: 1 (init)
- [ 2.549952] fb: osd[1] enable: 0 (init)
- [ 2.566618] vfm_map_store:rm default
- [ 2.566785] vfm_map_store:add default decoder ppmgr deinterlace amlvideo amvideo
- [ 2.580415] random: lvchange urandom read with 27 bits of entropy available
- [ 2.618457] bio: create slab <bio-1> at 1
- [ 2.729783] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null)
- [ 2.734517] fsck: E2fsck run: /bin/e2fsck -p -C 0 /dev/vero-nand/root
- [ 2.734626] fsck: Filesystem UUID: 3da4644c-1945-491d-87c1-b7efc8ab500e
- [ 2.734741] fsck: /dev/vero-nand/root: clean, 33865/930240 files, 472398/3716096 blocks
- [ 2.762728] usb 1-1: new high-speed USB device number 2 using xhci-hcd
- [ 2.903054] usb 1-1: New USB device found, idVendor=0b48, idProduct=3014
- [ 2.903058] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
- [ 2.903061] usb 1-1: Product: TechnoTrend USB-Stick
- [ 2.903063] usb 1-1: Manufacturer: CityCom GmbH
- [ 2.903066] usb 1-1: SerialNumber: 20131128
- [ 3.022656] usb 1-2: new low-speed USB device number 3 using xhci-hcd
- [ 3.170631] usb 1-2: New USB device found, idVendor=2017, idProduct=1688
- [ 3.170641] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
- [ 3.170647] usb 1-2: Product: USB Keyboard Mouse
- [ 3.170651] usb 1-2: Manufacturer: OSMC Remote Controller
- [ 3.186642] input: OSMC Remote Controller USB Keyboard Mouse as /devices/c9000000.dwc3/xhci-hcd.0.auto/usb1/1-2/1-2:1.0/0003:2017:1688.0001/input/input2
- [ 3.186879] hid-generic 0003:2017:1688.0001: input,hidraw0: USB HID v1.10 Keyboard [OSMC Remote Controller USB Keyboard Mouse] on usb-xhci-hcd.0.auto-2/input0
- [ 3.195478] input: OSMC Remote Controller USB Keyboard Mouse as /devices/c9000000.dwc3/xhci-hcd.0.auto/usb1/1-2/1-2:1.1/0003:2017:1688.0002/input/input3
- [ 3.195739] hid-generic 0003:2017:1688.0002: input,hidraw1: USB HID v1.10 Mouse [OSMC Remote Controller USB Keyboard Mouse] on usb-xhci-hcd.0.auto-2/input1
- [ 3.507873] systemd[1]: System time before build time, advancing clock.
- [ 3.513695] ip_tables: (C) 2000-2006 Netfilter Core Team
- [ 3.522807] systemd[1]: systemd 232 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN)
- [ 3.523126] systemd[1]: Detected architecture arm64.
- [ 3.525647] systemd[1]: Set hostname to <osmc>.
- [ 3.609013] meson_uart c81004c0.serial: ttyS0 use xtal(8M) 24000000 change 115200 to 115200
- [ 3.781840] systemd[1]: Created slice System Slice.
- [ 3.782346] systemd[1]: Created slice system-serial\x2dgetty.slice.
- [ 3.784158] systemd[1]: Mounting Debug File System...
- [ 3.784492] systemd[1]: Listening on Journal Socket (/dev/log).
- [ 3.786046] systemd[1]: Mounting RPC Pipe File System...
- [ 3.786347] systemd[1]: Listening on RPCbind Server Activation Socket.
- [ 3.786672] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
- [ 3.786810] systemd[1]: Reached target Swap.
- [ 3.787128] systemd[1]: Listening on Journal Socket.
- [ 3.789095] systemd[1]: Starting Create list of required static device nodes for the current kernel...
- [ 3.792916] systemd[1]: Starting Restore / save the current clock...
- [ 3.794874] systemd[1]: Starting Remount Root and Kernel File Systems...
- [ 3.795282] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
- [ 3.795455] systemd[1]: Reached target Paths.
- [ 3.795557] systemd[1]: Reached target Encrypted Volumes.
- [ 3.796004] systemd[1]: Created slice User and Session Slice.
- [ 3.799296] systemd[1]: Starting Load Kernel Modules...
- [ 3.799481] systemd[1]: Reached target Slices.
- [ 3.799742] systemd[1]: Listening on udev Kernel Socket.
- [ 3.800313] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
- [ 3.802898] systemd[1]: Listening on udev Control Socket.
- [ 3.805013] systemd[1]: Starting Journal Service...
- [ 3.807060] systemd[1]: Mounting POSIX Message Queue File System...
- [ 3.807490] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
- [ 3.811060] systemd[1]: Mounted RPC Pipe File System.
- [ 3.811262] systemd[1]: Mounted Debug File System.
- [ 3.812763] systemd[1]: Started Create list of required static device nodes for the current kernel.
- [ 3.815706] systemd[1]: Started Remount Root and Kernel File Systems.
- [ 3.816225] systemd[1]: Mounted POSIX Message Queue File System.
- [ 3.825239] media: Linux media interface: v0.10
- [ 3.829426] systemd[1]: Starting udev Coldplug all Devices...
- [ 3.831217] systemd[1]: Starting Load/Save Random Seed...
- [ 3.833333] systemd[1]: Starting Create Static Device Nodes in /dev...
- [ 3.835030] systemd[1]: Started Restore / save the current clock.
- [ 3.835900] systemd[1]: Time has been changed
- [ 3.856734] systemd[1]: Started Load/Save Random Seed.
- [ 3.879210] systemd[1]: Started Create Static Device Nodes in /dev.
- [ 3.879631] systemd[1]: Reached target Local File Systems (Pre).
- [ 3.879757] systemd[1]: Reached target Local File Systems.
- [ 3.881471] systemd[1]: Starting Preprocess NFS configuration...
- [ 3.883514] systemd[1]: Starting udev Kernel Device Manager...
- [ 3.897551] systemd[1]: Started Preprocess NFS configuration.
- [ 3.898145] systemd[1]: Reached target NFS client services.
- [ 3.910381] Linux video capture interface: v2.00
- [ 3.910393] WARNING: You are using an experimental version of the media stack.
- As the driver is backported to an older kernel, it doesn't offer
- enough quality for its usage in production.
- Use it with care.
- Latest git patches (needed if you report a bug to linux-media@vger.kernel.org):
- 9eeb0ed0f30938f31a3d9135a88b9502192c18dd [media] mtk-vcodec: fix build warnings without DEBUG
- 0d1270df836fe9f5cc7e8001b7372ca4fa3f00f6 [media] zd1301: fix building interface driver without demodulator
- 9165ba166cac5e8c9abda2012ea37cc3430c0b14 [media] usbtv: add sharpness control
- [ 3.924128] amlvid:err: amlvideo_init called
- [ 3.924138] amlvid:err: amlvideo_create_instance called
- [ 3.924146] amlvid:err: v4l2_dev.name=:amlvideo-000
- [ 3.925066] amlvideo-000: V4L2 device registered as video10
- [ 3.932064] WARNING: You are using an experimental version of the media stack.
- As the driver is backported to an older kernel, it doesn't offer
- enough quality for its usage in production.
- Use it with care.
- Latest git patches (needed if you report a bug to linux-media@vger.kernel.org):
- 9eeb0ed0f30938f31a3d9135a88b9502192c18dd [media] mtk-vcodec: fix build warnings without DEBUG
- 0d1270df836fe9f5cc7e8001b7372ca4fa3f00f6 [media] zd1301: fix building interface driver without demodulator
- 9165ba166cac5e8c9abda2012ea37cc3430c0b14 [media] usbtv: add sharpness control
- [ 3.935780] rc rc0: meson-ir as /devices/c8100580.meson-ir/rc/rc0
- [ 3.935791] Registered IR keymap rc-empty
- [ 3.935895] input: meson-ir as /devices/c8100580.meson-ir/rc/rc0/input4
- [ 3.936414] meson-ir c8100580.meson-ir: receiver initialized
- [ 3.944690] mali-utgard d00c0000.mali: max pp is 3
- [ 3.944705] mali-utgard d00c0000.mali: set min pp to default 1
- [ 3.944711] mali-utgard d00c0000.mali: min pp is 1
- [ 3.944715] mali-utgard d00c0000.mali: set min clk default to 0
- [ 3.944720] mali-utgard d00c0000.mali: min clk is 0
- [ 3.944755] mali-utgard d00c0000.mali: hiu io source 0xffffff80003be000
- [ 3.944764] mali-utgard d00c0000.mali: hiu io source 0xffffff80003de000
- [ 3.944769] mali-utgard d00c0000.mali: num of pp used most of time 3
- [ 3.944774] mali-utgard d00c0000.mali: clock dvfs cfg table size is 7
- [ 3.944828] mali-utgard d00c0000.mali: max clk set 5
- [ 3.944832] mali-utgard d00c0000.mali: max clk is 5
- [ 3.944837] mali-utgard d00c0000.mali: turbo clk set to 6
- [ 3.944841] mali-utgard d00c0000.mali: turbo clk is 6
- [ 3.944846] mali-utgard d00c0000.mali: default clk is 3
- [ 3.944853] mali-utgard d00c0000.mali: ====================0====================
- clk_freq= 125000000, clk_parent=fclk_div4, voltage=1150, keep_count=5, threshod=<30 250>, clk_sample=125
- [ 3.944862] mali-utgard d00c0000.mali: ====================1====================
- clk_freq= 285000000, clk_parent=fclk_div7, voltage=1150, keep_count=5, threshod=<100 250>, clk_sample=285
- [ 3.944871] mali-utgard d00c0000.mali: ====================2====================
- clk_freq= 400000000, clk_parent=fclk_div5, voltage=1150, keep_count=3, threshod=<168 250>, clk_sample=400
- [ 3.944872] systemd[1]: Started Journal Service.
- [ 3.944883] mali-utgard d00c0000.mali: ====================3====================
- clk_freq= 500000000, clk_parent=fclk_div4, voltage=1150, keep_count=2, threshod=<190 250>, clk_sample=500
- [ 3.944891] mali-utgard d00c0000.mali: ====================4====================
- clk_freq= 666000000, clk_parent=fclk_div3, voltage=1150, keep_count=1, threshod=<177 250>, clk_sample=666
- [ 3.944900] mali-utgard d00c0000.mali: ====================5====================
- clk_freq= 744000000, clk_parent= gp0_pll, voltage=1150, keep_count=1, threshod=<213 255>, clk_sample=744
- [ 3.944908] mali-utgard d00c0000.mali: ====================6====================
- clk_freq= 744000000, clk_parent= gp0_pll, voltage=1150, keep_count=1, threshod=<213 255>, clk_sample=744
- [ 3.944915] mali-utgard d00c0000.mali: clock dvfs table size is 7
- [ 3.950127] lirc_dev: IR Remote Control driver registered, major 228
- [ 3.950739] gpu cooling register okay with err=0
- [ 3.950752] register GPU cooling error
- [ 3.950755] gpu core cooling register okay with err=-22
- [ 3.950999] Mali: Mali device driver loaded
- [ 3.964214] rc rc0: lirc_dev: driver ir-lirc-codec (meson-ir) registered at minor = 0
- [ 3.964225] IR LIRC bridge handler initialized
- [ 3.966493] Triggered SDIO WiFi power on and bus rescan.
- [ 3.966579] aml_wifi wifi.32: [extern_wifi_set_enable] WIFI Disable! 240
- [ 3.970862] systemd-journald[171]: Received request to flush runtime journal from PID 1
- [ 4.230616] dwc_otg: usb0: type: 2 speed: 0, config: 0, dma: 0, id: 0, phy: d0078000, ctrl: 0
- [ 4.230629] dwc_otg_driver_probe host only, not probe usb_otg!!!
- [ 4.272632] aml_wifi wifi.32: [extern_wifi_set_enable] WIFI Enable! 240
- [ 4.277253] WARNING: You are using an experimental version of the media stack.
- As the driver is backported to an older kernel, it doesn't offer
- enough quality for its usage in production.
- Use it with care.
- Latest git patches (needed if you report a bug to linux-media@vger.kernel.org):
- 9eeb0ed0f30938f31a3d9135a88b9502192c18dd [media] mtk-vcodec: fix build warnings without DEBUG
- 0d1270df836fe9f5cc7e8001b7372ca4fa3f00f6 [media] zd1301: fix building interface driver without demodulator
- 9165ba166cac5e8c9abda2012ea37cc3430c0b14 [media] usbtv: add sharpness control
- [ 4.385952] BT_RADIO going: off
- [ 4.385965] BCM_BT: going SOFT-OFF, GPIO still being driven
- [ 4.482627] usb 1-1: dvb_usb_v2: found a 'TechnoTrend TVStick CT2-4400' in warm state
- [ 4.482841] usb 1-1: dvb_usb_v2: will pass the complete MPEG2 transport stream to the software demuxer
- [ 4.482878] dvbdev: DVB: registering new adapter (TechnoTrend TVStick CT2-4400)
- [ 4.482888] usb 1-1: media controller created
- [ 4.484149] usb 1-1: dvb_usb_v2: MAC address: bc:ea:2b:44:07:9c
- [ 4.485127] dvbdev: dvb_create_media_entity: media entity 'dvb-demux' registered.
- [ 4.489266] usbcore: registered new interface driver dvb_usb_dvbsky
- [ 4.583701] [aml_sd_emmc_irq] sdio: resp_timeout,vstat:0xa3ff2800,virqc:3fff
- [ 4.583713] [aml_host_bus_fsm_show] sdio: err: wait for irq service, bus_fsm:0x8
- [ 4.583728] aml_sd_emmc_data_thread 2639 sdio: cmd:52
- [ 4.584745] [aml_sd_emmc_irq] sdio: resp_timeout,vstat:0xa3ff2800,virqc:3fff
- [ 4.584749] [aml_host_bus_fsm_show] sdio: err: wait for irq service, bus_fsm:0x8
- [ 4.584757] aml_sd_emmc_data_thread 2639 sdio: cmd:52
- [ 4.589280] [aml_sd_emmc_irq] sdio: resp_timeout,vstat:0xa3ff2800,virqc:3fff
- [ 4.589284] [aml_host_bus_fsm_show] sdio: err: wait for irq service, bus_fsm:0x8
- [ 4.589292] aml_sd_emmc_data_thread 2639 sdio: cmd:8
- [ 4.613678] sdio: queuing unknown CIS tuple 0x80 (2 bytes)
- [ 4.616212] sdio: queuing unknown CIS tuple 0x80 (3 bytes)
- [ 4.618742] sdio: queuing unknown CIS tuple 0x80 (3 bytes)
- [ 4.623298] sdio: queuing unknown CIS tuple 0x80 (7 bytes)
- [ 4.628860] sdio: queuing unknown CIS tuple 0x81 (9 bytes)
- [ 4.713383] sdio: clk 200000000 SDR mode tuning start
- [ 4.713534] sdio: rx_tuning_result[0] = 10
- [ 4.713675] sdio: rx_tuning_result[1] = 10
- [ 4.713813] sdio: rx_tuning_result[2] = 10
- [ 4.713965] sdio: rx_tuning_result[4] = 10
- [ 4.713970] sdio: best_win_start =4, best_win_size =4
- [ 4.713974] sdio: sd_emmc_regs->gclock=0x1000245,sd_emmc_regs->gadjust=0x12000
- [ 4.713981] sdio: gclock =0x1000245, gdelay=0x0, gadjust=0x12000
- [ 4.715975] sdio: queuing unknown CIS tuple 0x91 (3 bytes)
- [ 4.715997] sdio: new ultra high speed SDR104 SDIO card at address 0001
- [ 4.716001] sdio: clock 200000000, 4-bit-bus-width
- [ 4.716231] [sdio_reinit] finish
- [ 4.742967] cfg80211: Calling CRDA to update world regulatory domain
- [ 4.770998] dhd_module_init: in
- [ 4.771010] ======== bcm_wlan_set_plat_data ========
- [ 4.771014] host_oob_irq: 100
- [ 4.771018] host_oob_irq_flags=0x414
- [ 4.771021] dhd_wifi_platform_load: Enter
- [ 4.771039] Power-up adapter 'DHD generic adapter'
- [ 4.771043] wifi_platform_set_power = 1
- [ 4.771046] ======== PULL WL_REG_ON HIGH! ========
- [ 4.771069] aml_wifi wifi.32: [extern_wifi_set_enable] WIFI Disable! 240
- [ 4.971103] aml_wifi wifi.32: [extern_wifi_set_enable] WIFI Enable! 240
- [ 5.321491] input: lircd as /devices/virtual/input/input5
- [ 5.472633] wifi_platform_bus_enumerate device present 1
- [ 5.472645] ======== Card detection to detect SDIO card! ========
- [ 5.472649] sdio_reset_comm():
- [ 5.505181] sdio: queuing unknown CIS tuple 0x80 (2 bytes)
- [ 5.507804] sdio: queuing unknown CIS tuple 0x80 (3 bytes)
- [ 5.510363] sdio: queuing unknown CIS tuple 0x80 (3 bytes)
- [ 5.515518] sdio: queuing unknown CIS tuple 0x80 (7 bytes)
- [ 5.616148] sdio: clk 200000000 SDR mode tuning start
- [ 5.616340] sdio: rx_tuning_result[0] = 10
- [ 5.616508] sdio: rx_tuning_result[1] = 10
- [ 5.616703] sdio: rx_tuning_result[2] = 10
- [ 5.616878] sdio: rx_tuning_result[4] = 10
- [ 5.616886] sdio: best_win_start =4, best_win_size =4
- [ 5.616890] sdio: sd_emmc_regs->gclock=0x1000245,sd_emmc_regs->gadjust=0x12000
- [ 5.616896] sdio: gclock =0x1000245, gdelay=0x0, gadjust=0x12000
- [ 5.616902] [sdio_reinit] finish
- [ 5.633158] bcmsdh_register: register client driver
- [ 5.633290] bcmsdh_sdmmc: bcmsdh_sdmmc_probe Enter
- [ 5.634736] bcmsdh_sdmmc: bcmsdh_sdmmc_probe Enter
- [ 5.634747] bus num (host idx)=0, slot num (rca)=1
- [ 5.634752] found adapter info 'DHD generic adapter'
- [ 5.634811] sdioh_attach: set sd_f2_blocksize 128
- [ 5.635060] dhdsdio_probe : no mutex held. set lock
- [ 5.635155] F1 signature read @0x18000000=0x15264345
- [ 5.635509] input: eventlircd as /devices/virtual/input/input8
- [ 5.638998] F1 signature OK, socitype:0x1 chip:0x4345 rev:0x6 pkg:0x2
- [ 5.639462] DHD: dongle ram size is set to 819200(orig 819200) at 0x198000
- [ 5.639535] dhd_conf_set_chiprev: chip=0x4345, chiprev=6
- [ 5.639575] dhd_conf_set_conf_path_by_nv_path: config_path=/lib/firmware/config.txt
- [ 5.639580] dhd_conf_set_conf_name_by_chip: config_path=/lib/firmware/config_43455c0.txt
- [ 5.658404] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
- [ 5.688478] dhd_conf_read_config: mimo_bw_cap = 1
- [ 5.688535] dhd_conf_read_config: bcn_timeout = 20
- [ 5.688549] dhd_conf_read_config: kso_enable = 0
- [ 5.688596] dhd_conf_read_config: PM = 0
- [ 5.691168] wl_create_event_handler(): thread:wl_event_handler:1cb started
- [ 5.691772] tsk Enter, tsk = 0xffffff80015e2880
- [ 5.691801] dhd_attach(): thread:dhd_watchdog_thread:1cc started
- [ 5.691843] dhd_attach(): thread:dhd_dpc:1cd started
- [ 5.691857] dhd_dpc_thread: set dpc_cpucore 0 from config.txt
- [ 5.691885] dhd_attach(): thread:dhd_rxf:1ce started
- [ 5.691899] dhd_deferred_work_init: work queue initialized
- [ 5.699221] Dongle Host Driver, version 1.201.59.6 (r506368)
- Compiled in drivers/net/wireless/bcmdhd
- [ 5.699731] Register interface [wlan0] MAC: cc:b8:a8:bb:96:b4
- [ 5.699746] dhd_prot_ioctl : bus is down. we have nothing to do
- [ 5.700501] bcmsdh_oob_intr_unregister: Enter
- [ 5.700514] bcmsdh_oob_intr_unregister: irq is not registered
- [ 5.700524] dhd_txglom_enable: enable 0
- [ 5.700528] dhd_conf_set_txglom_params: swtxglom=0, txglom_ext=0
- [ 5.700531] dhd_conf_set_txglom_params: txglom_bucket_size=0
- [ 5.700535] dhd_conf_set_txglom_params: txglomsize=0, deferred_tx_len=0, bus_txglom=0
- [ 5.700538] dhd_conf_set_txglom_params: tx_in_rx=1, tx_max_offset=0
- [ 5.700542] dhd_bus_devreset: WLAN OFF DONE
- [ 5.700625] wifi_platform_set_power = 0
- [ 5.700631] ======== PULL WL_REG_ON LOW! ========
- [ 5.700636] dhdsdio_probe : the lock is released.
- [ 5.700705] bcmsdh_sdmmc: bcmsdh_sdmmc_probe Enter
- [ 5.700758] dhd_module_init: Exit err=0
- [ 5.716087] Bluetooth: Core ver 2.18
- [ 5.716168] NET: Registered protocol family 31
- [ 5.716172] Bluetooth: HCI device and connection manager initialized
- [ 5.716194] Bluetooth: HCI socket layer initialized
- [ 5.716202] Bluetooth: L2CAP socket layer initialized
- [ 5.716252] Bluetooth: SCO socket layer initialized
- [ 5.720370] Bluetooth: Generic Bluetooth SDIO driver ver 0.1
- [ 5.843720] libphy: set driving length c
- [ 5.843813] libphy: set PLL minimum jitter
- [ 5.923711] libphy: set driving length c
- [ 5.923803] libphy: set PLL minimum jitter
- [ 5.943153] 8021q: 802.1Q VLAN Support v1.8
- [ 6.643454] Console: switching to colour dummy device 80x25
- [ 7.367675] libphy: stmmac-0:08 - Link is Up - 100/Full
- [ 8.027978] audio_dsp: buf=0
- [ 8.027990] audio_dsp: IEC958_mode_raw=0
- [ 8.028021] audio_dsp: IEC958_mode_codec= 1, IEC958 type 2 CH PCM
- [ 8.028025] audio_dsp: last mode 0,now 1
- [ 8.028029] audio_dsp: putting chip back to PCM state
- [ 8.028097] hdmitx: config: audio_on
- [ 8.028104] hdmitx: audio: configure on
- [ 8.033831] i2s/958 same source - init spdif
- [ 8.033844] aml_spdif_dai: aml_hw_iec958_init,runtime->rate=44100, runtime->channels=2, same source mode(1), stream format=1
- [ 8.033888] aml_spdif_dai: share the same clock
- [ 8.033897] aml_audio_hw: IEC958 PCM32
- [ 8.033903] hdmitx: audio: aout notify rate 44100
- [ 8.033907] hdmitx: audio: aout notify size 32
- [ 8.033911] hdmitx: audio: aout notify sample rate 44100 was 0
- [ 8.033916] hdmitx: audio: aout notify format CT_PCM was CT_REFER_TO_STREAM
- [ 8.033919] hdmitx: audio: aout notify sample size 4 was 0
- [ 8.033922] hdmitx: audio: aout notify channels 2 was 1
- [ 8.033926] hdmitx: audio: hdmi_ch: 0 speaker_layout: 0
- [ 8.033931] hdmtix: setting audio 1
- [ 8.033943] hdmitx tx_aud_src = 0
- [ 8.033963] hdmitx: audio: Audio Type: PCM Audio Channels: 2, Speaker layout: 0x0
- [ 8.033967] hdmitx: audio: Audio Output Channels set to: 0:0
- [ 8.033976] hdmitx: fs = 2, cd = 4, tmds_clk = 148500
- [ 8.033980] hdmitx aud_n_para = 6272
- [ 8.033998] hdmitx set channel status
- [ 8.034081] hdmitx: audio: set audio param
- [ 8.034425] sysfs set hdmi_ch to 0
- [ 8.034485] i2s/958 same source - init spdif
- [ 8.034492] aml_spdif_dai: aml_hw_iec958_init,runtime->rate=44100, runtime->channels=2, same source mode(1), stream format=1
- [ 8.034496] aml_spdif_dai: share the same clock
- [ 8.034503] aml_audio_hw: IEC958 PCM32
- [ 8.034508] hdmitx: audio: aout notify rate 44100
- [ 8.034511] hdmitx: audio: aout notify size 32
- [ 8.034515] hdmitx: audio: hdmi_ch: 0 speaker_layout: 0
- [ 8.034518] hdmitx: audio: no update
- [ 8.034644] channel count should be 8, we got 2 aborting
- [ 8.172935] codec:vdec_create instance ffffff8001760000, total 1
- [ 8.229516] vout_serve: vmode set to null
- [ 8.229549] fb: current vmode=1080p60hz, cmd: 0x50000
- [ 8.229556] tv_vout: tv_set_current_vmode[919]fps_target_mode=59
- [ 8.229561] tv_vout: mode is 59,sync_duration_den=1,sync_duration_num=60
- [ 8.229573] tv_vout: 3Invalid video output modes.
- [ 8.229577] tv_vout: new mode =null set ok
- [ 8.229580] vout_serve: vinfo mode is: null
- [ 8.229584] vout_serve: new mode null set ok
- [ 8.229595] hdmitx: edid: not find mapped vic
- [ 8.229602] hdmitx: video: get current mode: null
- [ 8.229605] hdmitx: update physcial size: 1020 570
- [ 8.229609] hdmitx: video: null not valid hdmi mode
- [ 8.229631] fb: current vmode=null, cmd: 0x10000
- [ 8.233377] hdmitx: set frac_rate_policy as 0
- [ 8.233405] vout_serve: vmode set to 720p50hz
- [ 8.233424] vout_serve: disable HDMI PHY as soon as possible
- [ 8.233430] fb: current vmode=null, cmd: 0x50000
- [ 8.233435] tv_vout: tv_set_current_vmode[919]fps_target_mode=11
- [ 8.233440] tv_vout: mode is 11,sync_duration_den=1,sync_duration_num=50
- [ 8.233452] tv_vout: TV mode 720p50hz selected.
- [ 8.233459]
- vdac_enable: on:0,module_sel:8
- [ 8.233468]
- vdac_enable: on:0,module_sel:8
- [ 8.233477] tv_vout: new mode =720p50hz set ok
- [ 8.233480] vout_serve: vinfo mode is: 720p50hz
- [ 8.233483] vout_serve: new mode 720p50hz set ok
- [ 8.233499] hdmitx: video: get current mode: 720p50hz
- [ 8.233503] hdmitx: update rx hdr info 0
- [ 8.233506] hdmitx: update physcial size: 1020 570
- [ 8.233546] hdmitx: system: already init VIC = 0 Now VIC = 19
- [ 8.233552] hdmitx: rx no SCDC present indicator
- [ 8.235562] hdmitx: ddc rd8b error 0x54 0x01
- [ 8.237575] hdmitx: ddc rd8b error 0x54 0x01
- [ 8.237584] hdmirx version is 1.4 or below
- [ 8.237588] hdmitx div40: 0
- [ 8.262589] hdmitx: system: set mode VIC 19 (cd0,cs0,pm1,vd0,1)
- [ 8.262598] hdmitx: system: set pll
- [ 8.262601] hdmitx: system: param->VIC:19
- [ 8.262605] hdmitx: set clk: VIC = 19 cd = 4 frac_rate = 0
- [ 8.262614] hdmitx: 1280x720p50hz doesn't have frac_rate
- [ 8.262620] config HPLL = 2970000
- [ 8.262640] HPLL: 0xc000027b
- [ 8.262643] config HPLL done
- [ 8.262651] set_hpll_od3_clk_div[442] div = 6
- [ 8.262659] j = 2 vid_clk_div = 1
- [ 8.262668] hdmitx: set enc for VIC: 19
- [ 8.262712] hdmitx_set_hw[5011] set VIC = 19
- [ 8.272701] hdmitx: system: irq 80000001
- [ 8.274595] hdmitx: ddc w1b error 0x54 0x20 0x00
- [ 8.274711] hdmitx: system: irq 80000001
- [ 8.276606] hdmitx: ddc w1b error 0x54 0x20 0x00
- [ 8.276719] hdmitx: system: irq 80000001
- [ 8.278616] hdmitx: ddc rd8b error 0x54 0x21
- [ 8.278655] Start = 0x10000100 End = 0x100001ff
- [ 8.278666] [0x10000104]: 0x00000001
- [ 8.278833] [0x10000180]: 0x000000ff
- [ 8.278838] [0x10000181]: 0x000000ff
- [ 8.278842] [0x10000182]: 0x00000003
- [ 8.278847] [0x10000183]: 0x00000007
- [ 8.278852] [0x10000184]: 0x0000003f
- [ 8.278856] [0x10000185]: 0x00000002
- [ 8.278862] [0x10000187]: 0x000000ff
- [ 8.278866] [0x10000188]: 0x00000003
- [ 8.394594] hdmitx: system: PHY Setting Done
- [ 8.394620] hdmitx: system: irq 80000001
- [ 8.398670] Sink is HDMI device
- [ 8.398687] hdmitx: system: packet: can't get vendor data
- [ 8.398692] 720p50hz 50 1
- [ 8.398698] 720p50hz 50 1
- [ 8.398702] hdmtix: setting audio 1
- [ 8.398706] hdmitx tx_aud_src = 0
- [ 8.398726] hdmitx: audio: Audio Type: PCM Audio Channels: 2, Speaker layout: 0x0
- [ 8.398730] hdmitx: audio: Audio Output Channels set to: 0:0
- [ 8.398739] hdmitx: fs = 2, cd = 4, tmds_clk = 74250
- [ 8.398743] hdmitx aud_n_para = 6272
- [ 8.398762] hdmitx set channel status
- [ 8.398861] Start = 0x10000100 End = 0x100001ff
- [ 8.398871] [0x10000104]: 0x00000001
- [ 8.399049] [0x10000180]: 0x000000ff
- [ 8.399054] [0x10000181]: 0x000000ff
- [ 8.399059] [0x10000182]: 0x00000003
- [ 8.399063] [0x10000183]: 0x00000007
- [ 8.399068] [0x10000184]: 0x0000003f
- [ 8.399072] [0x10000185]: 0x00000002
- [ 8.399078] [0x10000187]: 0x000000ff
- [ 8.399083] [0x10000188]: 0x00000003
- [ 8.399267] fb: current vmode=720p50hz, cmd: 0x10000
- [ 8.435677] random: nonblocking pool is initialized
- [ 8.476824] fb: osd[0] enable: 1 (kodi.bin)
- [ 11.302626] cectx aocec: cec_ll_tx(): tx timeout
- [ 11.648828] meson_uart c81004c0.serial: ttyS0 use xtal(8M) 24000000 change 115200 to 115200
- [ 11.648971] meson_uart c81004c0.serial: ttyS0 use xtal(8M) 24000000 change 115200 to 115200
- [ 11.655861] meson_uart c81004c0.serial: ttyS0 use xtal(8M) 24000000 change 115200 to 115200
- [ 11.657659] meson_uart c81004c0.serial: ttyS0 use xtal(8M) 24000000 change 115200 to 115200
- [ 13.342644] cectx aocec: cec_ll_tx(): tx timeout
- [ 16.382712] cectx aocec: cec_ll_tx(): tx timeout
- [ 19.422754] cectx aocec: cec_ll_tx(): tx timeout
- [ 21.462769] cectx aocec: cec_ll_tx(): tx timeout
- [ 23.502813] cectx aocec: cec_ll_tx(): tx timeout
- [ 23.562172] audio_dsp: buf=0
- [ 23.562185] audio_dsp: IEC958_mode_raw=0
- [ 23.562218] audio_dsp: IEC958_mode_codec= 1, IEC958 type 2 CH PCM
- [ 23.562222] audio_dsp: last mode 1,now 1
- [ 23.562226] audio_dsp: putting chip back to PCM state
- [ 23.562289] hdmitx: config: audio_on
- [ 23.562296] hdmitx: audio: configure on
- [ 23.568378] i2s/958 same source - init spdif
- [ 23.568394] aml_spdif_dai: aml_hw_iec958_init,runtime->rate=44100, runtime->channels=2, same source mode(1), stream format=1
- [ 23.568400] aml_spdif_dai: share the same clock
- [ 23.568408] aml_audio_hw: IEC958 PCM32
- [ 23.568414] hdmitx: audio: aout notify rate 44100
- [ 23.568418] hdmitx: audio: aout notify size 32
- [ 23.568422] hdmitx: audio: hdmi_ch: 0 speaker_layout: 0
- [ 23.568425] hdmitx: audio: no update
- [ 23.568667] sysfs set hdmi_ch to 0
- [ 23.568706] i2s/958 same source - init spdif
- [ 23.568714] aml_spdif_dai: aml_hw_iec958_init,runtime->rate=44100, runtime->channels=2, same source mode(1), stream format=1
- [ 23.568719] aml_spdif_dai: share the same clock
- [ 23.568728] aml_audio_hw: IEC958 PCM32
- [ 23.568734] hdmitx: audio: aout notify rate 44100
- [ 23.568737] hdmitx: audio: aout notify size 32
- [ 23.568742] hdmitx: audio: hdmi_ch: 0 speaker_layout: 0
- [ 23.568745] hdmitx: audio: no update
- [ 23.568895] channel count should be 8, we got 2 aborting
- [ 23.569490] aml_snd_m8_card aml_m8_snd.46: I2S playback enable
- [ 23.569504] aml_snd_m8_card aml_m8_snd.46: IEC958 playback enable
- [ 24.312026] aml_snd_m8_card aml_m8_snd.46: I2S playback disable
- [ 24.312042] aml_snd_m8_card aml_m8_snd.46: IEC958 playback disable
- [ 24.312101] i2s/958 same source - init spdif
- [ 24.312112] aml_spdif_dai: aml_hw_iec958_init,runtime->rate=44100, runtime->channels=2, same source mode(1), stream format=1
- [ 24.312118] aml_spdif_dai: share the same clock
- [ 24.312127] aml_audio_hw: IEC958 PCM32
- [ 24.312133] hdmitx: audio: aout notify rate 44100
- [ 24.312136] hdmitx: audio: aout notify size 32
- [ 24.312141] hdmitx: audio: hdmi_ch: 0 speaker_layout: 0
- [ 24.312144] hdmitx: audio: no update
- [ 28.957648] aml_snd_m8_card aml_m8_snd.46: I2S playback enable
- [ 28.957663] aml_snd_m8_card aml_m8_snd.46: IEC958 playback enable
- [ 29.235781] aml_snd_m8_card aml_m8_snd.46: I2S playback disable
- [ 29.235795] aml_snd_m8_card aml_m8_snd.46: IEC958 playback disable
- [ 29.235846] i2s/958 same source - init spdif
- [ 29.235853] aml_spdif_dai: aml_hw_iec958_init,runtime->rate=44100, runtime->channels=2, same source mode(1), stream format=1
- [ 29.235859] aml_spdif_dai: share the same clock
- [ 29.235866] aml_audio_hw: IEC958 PCM32
- [ 29.235872] hdmitx: audio: aout notify rate 44100
- [ 29.235876] hdmitx: audio: aout notify size 32
- [ 29.235880] hdmitx: audio: hdmi_ch: 0 speaker_layout: 0
- [ 29.235883] hdmitx: audio: no update
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement