API tools faq
paste
Advertisement
Guest User

Untitled

a guest
Dec 27th, 2021
55
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 23.52 KB | None | 0 0
raw download clone embed print report
  1. G12B:BL:6e7c85:7898ac;FEAT:E0F83180:402000;POC:B;RCY:0;SPINOR:0;0.▒!,K▒▒х▒▒}▒▒▒с0x01
  2. bl2_stage_init 0x81
  3. hw id: 0x0000 - pwm id 0x01
  4. bl2_stage_init 0xc1
  5. bl2_stage_init 0x02
  6.  
  7. L0:00000000
  8. L1:00000703
  9. L2:0000c067
  10. L3:14000020
  11. B2:00402000
  12. B1:e0f83180
  13.  
  14. TE: 59639
  15.  
  16. BL2 Built : 06:17:13, Jun 28 2019. g12b gf0505d7-dirty - qi.duan@droid13
  17.  
  18. Board ID = 4
  19. Set A53 clk to 24M
  20. Set A73 clk to 24M
  21. Set clk81 to 24M
  22. A53 clk: 1200 MHz
  23. A73 clk: 1200 MHz
  24. CLK81: 166.6M
  25. smccc: 000130d3
  26. DDR driver_vesion: LPDDR4_PHY_V_0_1_14 build time: Jun 28 2019 06:17:09
  27. board id: 4
  28. Load FIP HDR from SPI, src: 0x00010000, des: 0xfffd0000, size: 0x00004000, part: 0
  29. fw parse done
  30. Load ddrfw from SPI, src: 0x00030000, des: 0xfffd0000, size: 0x0000c000, part: 0
  31. Load ddrfw from SPI, src: 0x0002c000, des: 0xfffd0000, size: 0x00004000, part: 0
  32. PIEI prepare done
  33. fastboot data load
  34. fastboot data verify
  35. verify result: 255
  36. Cfg max: 2, cur: 1. Board id: 255. Force loop cfg
  37. DDR4 probe
  38. ddr clk to 1320MHz
  39. Load ddrfw from SPI, src: 0x00014000, des: 0xfffd0000, size: 0x0000c000, part: 0
  40. Check phy result
  41. INFO : End of initialization
  42. INFO : End of read enable training
  43. INFO : End of fine write leveling
  44. INFO : End of read dq deskew training
  45. INFO : End of MPR read delay center optimization
  46. INFO : End of Write leveling coarse delay
  47. INFO : End of write delay center optimization
  48. INFO : End of read delay center optimization
  49. INFO : End of max read latency training
  50. INFO : Training has run successfully!
  51. 1D training succeed
  52. Load ddrfw from SPI, src: 0x00020000, des: 0xfffd0000, size: 0x0000c000, part: 0
  53. Check phy result
  54. INFO : End of initialization
  55. INFO : End of 2D read delay Voltage center optimization
  56. INFO : End of 2D write delay Voltage center optimization
  57. INFO : Training has run successfully!
  58.  
  59. R0_RxClkDly_Margin==82 ps 7
  60. R0_TxDqDly_Margi==106 ps 9
  61.  
  62.  
  63. R1_RxClkDly_Margin==0 ps 0
  64. R1_TxDqDly_Margi==0 ps 0
  65.  
  66. dwc_ddrphy_apb_wr((0<<20)|(2<<16)|(0<<12)|(0xb0):0001
  67. 2D training succeed
  68. auto size-- 65535DDR cs0 size: 2048MB
  69. DDR cs1 size: 2048MB
  70. DMC_DDR_CTRL: 00600024DDR size: 3928MB
  71. cs0 DataBus test pass
  72. cs1 DataBus test pass
  73. cs0 AddrBus test pass
  74. cs1 AddrBus test pass
  75. pre test bdlr_100_average==416 bdlr_100_min==416 bdlr_100_max==416 bdlr_100_cur==416
  76. aft test bdlr_100_average==416 bdlr_100_min==416 bdlr_100_max==416 bdlr_100_cur==416
  77. non-sec scramble use zero key
  78. ddr scramble enabled
  79.  
  80. 100bdlr_step_size ps== 416
  81. result report
  82. boot times 2Enable ddr reg access
  83. Load FIP TMP HDR from SPI, src: 0x00010000, des: 0x05100000, size: 0x00004000, part: 0
  84. Load BL31 from SPI, src: 0x00049000, des: 0x05104000, size: 0x0002ab70, part: 0
  85. bl2z_ptr: 05100000
  86. img_info->image_base: 05100000
  87. NO BL2z!
  88. Load FIP HDR from SPI, src: 0x00010000, des: 0x01700000, size: 0x00004000, part: 0
  89. Load BL3X from SPI, src: 0x0003c000, des: 0x0172c000, size: 0x00094000, part: 0
  90. 0.0;M3 CHK:0;cm4_sp_mode 0
  91. E30HDR
  92. MVN_1=0x00000000
  93. MVN_2=0x00000000
  94. [Image: g12b_v1.1.3375-8f9c8a7 2019-01-24 10:44:46 guotai.shen@droid11-sz]
  95. OPS=0x40
  96. ring efuse init
  97. chipver efuse init
  98. 29 0a 40 00 01 04 18 00 00 06 31 32 54 52 4d 50
  99. [3.592990 Inits done]
  100. secure task start!
  101. high task start!
  102. low task start!
  103. run into bl31
  104. NOTICE: BL31: v1.3(release):ab8811b
  105. NOTICE: BL31: Built : 15:03:31, Feb 12 2019
  106. NOTICE: BL31: G12A normal boot!
  107. NOTICE: BL31: BL33 decompress pass
  108. ERROR: Error initializing runtime service opteed_fast
  109.  
  110.  
  111. U-Boot 2015.01 (Dec 20 2021 - 12:17:05)
  112.  
  113. DRAM: 3.5 GiB
  114. Relocation Offset is: d6ef5000
  115. spi_post_bind(spifc): req_seq = 0
  116. register usb cfg[0][1] = 00000000d7f85e68
  117. MMC: aml_priv->desc_buf = 0x00000000d3ee57c0
  118. aml_priv->desc_buf = 0x00000000d3ee7b00
  119. SDIO Port C: 0, SDIO Port B: 1
  120. spifc_probe: reg=00000000ffd14000, mem_map=00000000f6000000
  121. SF: Detected MX25U6435F with page size 256 Bytes, erase size 64 KiB, total 8 MiB
  122. In: serial
  123. Out: serial
  124. Err: serial
  125. vpu: error: vpu: check dts: FDT_ERR_BADMAGIC, load default parameters
  126. vpu: driver version: v20190313
  127. vpu: detect chip type: 9
  128. vpu: clk_level default: 7(666667000Hz), max: 7(666667000Hz)
  129. vpu: clk_level = 7
  130. vpu: vpu_power_on
  131. vpu: set_vpu_clk
  132. vpu: set clk: 666667000Hz, readback: 666666667Hz(0x100)
  133. vpu: set_vpu_clk finish
  134. vpu: vpu_module_init_config
  135. vpp: vpp_init
  136. vpp: g12a/b osd1 matrix rgb2yuv ..............
  137. vpp: g12a/b osd2 matrix rgb2yuv..............
  138. vpp: g12a/b osd3 matrix rgb2yuv..............
  139. cvbs: cpuid:0x29
  140. cvbs_config_hdmipll_g12a
  141. cvbs_set_vid2_clk
  142. co-phase 0x3, tx-dly 0, clock 400000
  143. co-phase 0x3, tx-dly 0, clock 400000
  144. co-phase 0x3, tx-dly 0, clock 400000
  145. emmc/sd response timeout, cmd8, status=0x1bf2800
  146. emmc/sd response timeout, cmd55, status=0x1bf2800
  147. emmc/sd response timeout, cmd1, status=0x1bf2800
  148. Net: dwmac.ff3f0000
  149. Hit Enter or space or Ctrl+C key to stop autoboot -- : 0
  150. SF: Detected MX25U6435F with page size 256 Bytes, erase size 64 KiB, total 8 MiB
  151. SF: 7274496 bytes @ 0x110000 Read: OK
  152. ### CRAMFS load complete: 1887 bytes loaded to 0x10000000
  153. ## Executing script at 10000000
  154. [OSD]check dts: FDT_ERR_BADMAGIC, load default fb_addr parameters
  155. [OSD]set initrd_high: 0x3d800000
  156. [OSD]fb_addr for logo: 0x3d800000
  157. [OSD]check dts: FDT_ERR_BADMAGIC, load default fb_addr parameters
  158. [OSD]fb_addr for logo: 0x3d800000
  159. [OSD]VPP_OFIFO_SIZE:0xfff01fff
  160. [CANVAS]canvas init
  161. [CANVAS]addr=0x3d800000 width=5760, height=2160
  162. cvbs: outputmode[480p60hz] is invalid
  163. vpp: vpp_matrix_update: 2
  164. set hdmitx VIC = 3
  165. config HPLL = 4324320 frac_rate = 1
  166. HPLL: 0x3b0004b4
  167. HPLL: 0x1b0004b4
  168. HPLL: 0xdb0004b4
  169. config HPLL done
  170. j = 1 vid_clk_div = 1
  171. hdmitx phy setting done
  172. hdmitx: set enc for VIC: 3
  173. enc_vpu_bridge_reset[1319]
  174. rx version is 1.4 or below div=10
  175. HDMI cable is NOT connected
  176. card in
  177. co-phase 0x2, tx-dly 0, clock 400000
  178. co-phase 0x2, tx-dly 0, clock 400000
  179. co-phase 0x2, tx-dly 0, clock 400000
  180. co-phase 0x2, tx-dly 0, clock 400000
  181. co-phase 0x2, tx-dly 0, clock 40000000
  182. aml_sd_retry_refix[983]:delay = 0x0,gadjust =0xc2000
  183. [mmc_startup] mmc refix success
  184. [mmc_init] mmc init success
  185. reading petitboot.cfg
  186. 56 bytes read in 4 ms (13.7 KiB/s)
  187. ini: Imported hdmimode as 480p60hz
  188. ini: Imported overwrite as false
  189. ini: Imported voutmode as dvi
  190. ### CRAMFS load complete: 41831 bytes loaded to 0x3000000
  191. [OSD]check dts: FDT_ERR_BADMAGIC, load default fb_addr parameters
  192. [OSD]fb_addr for logo: 0x3d800000
  193. [OSD]check dts: FDT_ERR_BADMAGIC, load default fb_addr parameters
  194. [OSD]fb_addr for logo: 0x3d800000
  195. [OSD]VPP_OFIFO_SIZE:0xfff01000
  196. [CANVAS]addr=0x3d800000 width=3840, height=1440
  197. cvbs: outputmode[480p60hz] is invalid
  198. vpp: vpp_matrix_update: 2
  199. set hdmitx VIC = 3
  200. config HPLL = 4324320 frac_rate = 1
  201. HPLL: 0x3b0004b4
  202. HPLL: 0x1b0004b4
  203. HPLL: 0xdb0004b4
  204. config HPLL done
  205. j = 1 vid_clk_div = 1
  206. hdmitx phy setting done
  207. hdmitx: set enc for VIC: 3
  208. enc_vpu_bridge_reset[1319]
  209. rx version is 1.4 or below div=10
  210. set hdmitx VIC = 3
  211. config HPLL = 4324320 frac_rate = 1
  212. HPLL: 0x3b0004b4
  213. HPLL: 0x1b0004b4
  214. HPLL: 0xdb0004b4
  215. config HPLL done
  216. j = 1 vid_clk_div = 1
  217. hdmitx phy setting done
  218. hdmitx: set enc for VIC: 3
  219. enc_vpu_bridge_reset[1319]
  220. rx version is 1.4 or below div=10
  221. [OSD]osd_hw.free_dst_data: 0,719,0,479
  222. ### CRAMFS load complete: 3937513 bytes loaded to 0x2000000
  223. ### CRAMFS load complete: 2986211 bytes loaded to 0x3000000
  224. ### CRAMFS load complete: 70476 bytes loaded to 0x1000000
  225. ee_gate_off ...
  226. ## Booting kernel from Legacy Image at 02000000 ...
  227. Image Name:
  228. Image Type: AArch64 Linux Kernel Image (gzip compressed)
  229. Data Size: 3937449 Bytes = 3.8 MiB
  230. Load Address: 01080000
  231. Entry Point: 01080000
  232. Verifying Checksum ... OK
  233. ## Loading init Ramdisk from Legacy Image at 03000000 ...
  234. Image Name:
  235. Image Type: AArch64 Linux RAMDisk Image (uncompressed)
  236. Data Size: 2986147 Bytes = 2.8 MiB
  237. Load Address: 00000000
  238. Entry Point: 00000000
  239. Verifying Checksum ... OK
  240. active_slot is <NULL>
  241. Unknown command 'store' - try 'help'
  242. No dtbo patitions found
  243. load dtb from 0x1000000 ......
  244. ## Flattened Device Tree blob at 01000000
  245. Booting using the fdt blob at 0x1000000
  246. No valid dtbo image found
  247. Uncompressing Kernel Image ... OK
  248. kernel loaded at 0x01080000, end = 0x019ec808
  249. reserving fdt memory region: addr=1000000 size=12000
  250. Loading Ramdisk to 3d526000, end 3d7ff0a3 ... OK
  251. Loading Device Tree to 000000001ffeb000, end 000000001ffff34b ... OK
  252.  
  253. Starting kernel ...
  254.  
  255. uboot time: 6787858 us
  256. 7f800000 - 80000000, 8192 KB, linux,meson-fb
  257. e5800000 - ed800000, 131072 KB, linux,ion-dev
  258. e3000000 - e5800000, 40960 KB, linux,di_cma
  259. e3000000 - e3000000, 0 KB, linux,ppmgr
  260. cfc00000 - e3000000, 315392 KB, linux,codec_mm_cma
  261. cfc00000 - cfc00000, 0 KB, linux,codec_mm_reserved
  262. 05000000 - 05400000, 4096 KB, linux,secmon
  263. codec_mm_module_init
  264. clkmsr ffd18004.meson_clk_msr: failed to get msr ring reg0
  265. meson-pwm ff802000.pwm: pwm pinmux : can't get pinctrl
  266. meson-pwm ffd1b000.pwm: pwm pinmux : can't get pinctrl
  267. meson_cpufreq_init:don't find the node <dynamic_gp1_clk>
  268. meson_cpufreq_init:don't find the node <dynamic_gp1_clk>
  269. ff803000.serial: clock gate not found
  270. rtc-pcf8563 1-0051: low voltage detected, date/time is not reliable.
  271. meson-remote ff808040.rc: don't find the node <led_blink>
  272. meson-remote ff808040.rc: don't find the node <led_blink_frq>
  273. meson-fb meson-fb: create ion_client ffffffc0c9650900, handle=ffffffc0c95f4a80
  274. meson-fb meson-fb: ion memory(0): created fb at 0x00000000e5800000, size 75 MiB
  275. di_get_vpu_clkb: get clk vpu error.
  276. meson-mmc: >>>>>>>>hostbase ffffff8008529000, dmode
  277. meson-mmc: >>>>>>>>hostbase ffffff8008532000, dmode
  278. meson-mmc: emmc: resp_timeout,vstat:0xa10f2800,virqc:3fff
  279. meson-mmc: emmc: err: wait for irq service, bus_fsm:0x8
  280. meson-mmc: meson_mmc_irq_thread_v3() 653: set 1st retry!
  281. meson-mmc: retry cmd 1 the 3-th time(s)
  282. meson-mmc: emmc: resp_timeout,vstat:0x9d0f0800,virqc:3fff
  283. meson-mmc: emmc: err: wait for desc write back, bus_fsm:0x7
  284. meson-mmc: retry cmd 1 the 2-th time(s)
  285. meson-mmc: emmc: resp_timeout,vstat:0x9d0f0800,virqc:3fff
  286. meson-mmc: emmc: err: wait for desc write back, bus_fsm:0x7
  287. meson-mmc: retry cmd 1 the 1-th time(s)
  288. meson-mmc: emmc: resp_timeout,vstat:0xa10f2800,virqc:3fff
  289. meson-mmc: emmc: err: wait for irq service, bus_fsm:0x8
  290. meson-mmc: Command retried failed line:675, cmd:1
  291. rtc-pcf8563 1-0051: low voltage detected, date/time is not reliable.
  292. rtc-pcf8563 1-0051: hctosys: unable to read the hardware clock
  293. dwc_otg: usb0: type: 2 speed: 0, config: 0, dma: 0, id: 0, phy: ffe09000, ctrl: 0
  294. dwc_otg: Core Release: 3.30a
  295. dwc_otg: Setting default values for core params
  296. dwc_otg: curmode: 0, host_only: 0
  297. dwc_otg: Using Buffer DMA mode
  298. dwc_otg: OTG VER PARAM: 1, OTG VER FLAG: 1
  299. dwc_otg: Working on port type = SLAVE
  300. dwc_otg: Dedicated Tx FIFOs mode
  301. pm-meson pm: Can't get switch_clk81
  302.  
  303. / # wake-on-lan = 00000001
  304. pwr_key=ffffffff
  305. [ 0.000000@0] OF: reserved mem: invalid size property in 'linux,galcore' node.
  306. [ 0.000000@0] OF: reserved mem: invalid size property in 'linux,isp_cma' node.
  307. [ 0.000000@0] OF: reserved mem: invalid size property in 'linux,adapt_cma' node.
  308. [ 0.310521@0] codec_mm_module_init
  309. [ 0.318628@0] clkmsr ffd18004.meson_clk_msr: failed to get msr ring reg0
  310. [ 0.335511@0] cvbs_out: chrdev devno 263192576 for disp
  311. [ 0.493699@4] dmi: Firmware registration failed.
  312. [ 0.818621@4] meson-pwm ff802000.pwm: pwm pinmux : can't get pinctrl
  313. [ 0.818920@4] meson-pwm ffd1b000.pwm: pwm pinmux : can't get pinctrl
  314. [ 0.830513@3] mtdoops: mtd device (mtddev=name/number) must be supplied
  315. [ 0.849272@2] meson_cpufreq_probe: Registered platform drive
  316. [ 0.849391@2] ff803000.serial: clock gate not found
  317. [ 0.918927@2] rtc-pcf8563 3-0051: low voltage detected, date/time is not reliable.
  318. [ 0.924782@2] gpio-keypad ff800000.gpio_keypad: failed to get gpio index from dts
  319. [ 0.930294@2] meson-remote ff808040.rc: don't find the node <led_blink>
  320. [ 0.936758@2] meson-remote ff808040.rc: don't find the node <led_blink_frq>
  321. [ 0.944368@2] efuse efuse: open efuse clk gate error!!
  322. [ 0.950451@2] ge2d: cannot get clockDBGC▒
  323. [ 0.953544@2] Unable to handle kernel NULL pointer dereference at virtual address 00000000
  324. [ 0.961199@2] pgd = ffffff800aa01000
  325. [ 0.964743@2] [00000000] *pgd=00000000cf3fe003, *pud=00000000cf3fe003, *pmd=0000000000000000
  326. [ 0.973146@2] Internal error: Oops: 96000045 [#1] PREEMPT SMP
  327. [ 0.978866@2] Modules linked in:
  328. [ 0.982075@2] CPU: 2 PID: 1 Comm: swapper/0 Tainted: G W 4.9.113 #1
  329. [ 0.989438@2] Hardware name: Hardkernel ODROID-N2 (DT)
  330. [ 0.994551@2] task: ffffffc0ca910000 task.stack: ffffff8020000000
  331. [ 1.000623@2] PC is at create_ge2d_work_queue+0x118/0x168
  332. [ 1.005992@2] LR is at create_ge2d_work_queue+0x108/0x168
  333. [ 1.011365@2] pc : [<ffffff800981c340>] lr : [<ffffff800981c330>] pstate: 80000045
  334. [ 1.018905@2] sp : ffffff8020003d00
  335. [ 1.022371@2] x29: ffffff8020003d00 [ 1.025619@0] hdmitx: system: plugin
  336. [ 1.029305@2] x28: ffffff800a0f0d88 x27: 0000000000000001 x26: 0000000000000001
  337. [ 1.036671@2] x25: ffffff800a98fba8 x24: ffffff800a98e000
  338. [ 1.042131@2] x23: 00000000024080c0 x22: ffffff800a93fd20
  339. [ 1.047591@2] x21: ffffffc0c9202800 x20: ffffff800a98e970
  340. [ 1.053051@2] x19: ffffff800a98e910 x18: 0000000000000001
  341. [ 1.058511@2] x17: 0000000000000007 x16: 0000000000000001
  342. [ 1.063971@2] x15: ffffffffffffffff x14: ffffff80a0003c6f
  343. [ 1.069431@2] x13: ff00000000000000 x12: 0000000000000028
  344. [ 1.074891@2] x11: 0000000000000003 x10: 0101010101010101
  345. [ 1.080351@2] x9 : 0000000000000000 x8 : ffffffc0c8c4b000
  346. [ 1.085811@2] x7 : 0000000000000000 x6 : 0000000000000000
  347. [ 1.091271@2] x5 : ffffff8020003d00 x4 : ffffffc0cf32d050
  348. [ 1.096731@2] x3 : ffffff800981c330 x2 : 0000000000000000
  349. [ 1.102191@2] x1 : 0000000000000000 x0 : 0000000000000000
  350. [ 1.107652@2]
  351. [ 1.107652@2] X4: 0xffffffc0cf32cfd0:
  352. [ 1.112938@2] cfd0 08003000 ffffff80 00000017 00000000 cf329060 ffffffc0 cf32d050 ffffffc0
  353. [ 1.121257@2] cff0 0a893bb8 ffffff80 00000000 00000000 cf32d040 ffffffc0 09083144 ffffff80
  354. [ 1.129577@2] d010 20003750 ffffff80 ffffffff 0000007f cf337aa0 ffffffc0 0910c6d8 ffffff80
  355. [ 1.137897@2] d030 60000145 00000000 00000000 00000000 20003880 ffffff80 20003750 ffffff80
  356. [ 1.146217@2] d050 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
  357. [ 1.154537@2] d070 00000000 00000000[ 1.157813@0] hdmitx: edid: EDID Parser:
  358. [ 1.157825@0] hdmitx: edid: dump_dtd_info[1904]
  359. [ 1.157826@0] hdmitx: edid: pixel_clock: 2957
  360. [ 1.157828@0] hdmitx: edid: h_active: 800
  361. [ 1.157830@0] hdmitx: edid: h_blank: 192
  362. [ 1.157832@0] hdmitx: edid: v_active: 480
  363. [ 1.157833@0] hdmitx: edid: v_blank: 17
  364. [ 1.157835@0] hdmitx: edid: h_sync_offset: 16
  365. [ 1.157836@0] hdmitx: edid: h_sync: 80
  366. [ 1.157838@0] hdmitx: edid: v_sync_offset: 1
  367. [ 1.157840@0] hdmitx: edid: v_sync: 3
  368. [ 1.157849@0] hdmitx: edid: dump_dtd_info[1904]
  369. [ 1.157851@0] hdmitx: edid: pixel_clock: 0
  370. [ 1.157852@0] hdmitx: edid: h_active: 0
  371. [ 1.157854@0] hdmitx: edid: h_blank: 16
  372. [ 1.157855@0] hdmitx: edid: v_active: 528
  373. [ 1.157857@0] hdmitx: edid: v_blank: 10
  374. [ 1.157859@0] hdmitx: edid: h_sync_offset: 32
  375. [ 1.157860@0] hdmitx: edid: h_sync: 544
  376. [ 1.157862@0] hdmitx: edid: v_sync_offset: 2
  377. [ 1.157863@0] hdmitx: edid: v_sync: 0
  378. [ 1.157865@0] hdmitx: edid: find IEEEOUT
  379. [ 1.157881@0] hdmitx: edid: check sum valid
  380. [ 1.157883@0] hdmitx: edid: check sum valid
  381. [ 1.157886@0] hdmitx: edid: update rx hdr info 0 at edid parsing
  382. [ 1.157889@0] hdmitx: edid: check sum valid
  383. [ 1.157891@0] hdmitx: edid: check sum valid
  384. [ 1.157894@0] hdmitx: edid: blk0 raw data
  385. [ 1.157917@0] hdmitx: edid:
  386. [ 1.157917@0] 00ffffffffffff0036090850010101012215010380291a78eee5b5a355499927
  387. [ 1.157917@0] 135054ac0000010101010101010101010101010101018d0b20c030e011101050
  388. [ 1.157917@0] 1300ffff0000001c000000fc004d5049353030380a2020202020000000fd0032
  389. [ 1.157917@0] 4c1e510e000a202020202020000000ff0042333433323834350a20202020016f
  390. [ 1.157917@0]
  391. [ 1.157917@0]
  392. [ 1.157919@0] hdmitx: edid: blk1 raw data
  393. [ 1.157942@0] hdmitx: edid:
  394. [ 1.157942@0] 020314714100230987078301000065030c0010000000001000100a2020202020
  395. [ 1.157942@0] 2020202020200000001000100a20202020202020202020200000001000010120
  396. [ 1.157942@0] 202020202020202020200000001000100a202020202020202020202000000010
  397. [ 1.157942@0] 00100a20202020202020202020200000000000000000000000000000000000d9
  398. [ 1.157942@0]
  399. [ 1.157942@0]
  400. [ 1.157945@0] hdmitx: system: update physcial size: 410 260
  401. [ 1.157947@0] hdmitx: video: Sink is HDMI device
  402. [ 1.157951@0] hdmitx: system: get current mode: 720p60hz
  403. [ 1.157953@0] hdmitx: system: update rx hdr info 0
  404. [ 1.157955@0] hdmitx: system: update physcial size: 410 260
  405. [ 1.157969@0] hdmitx: system: [set_disp_mode_auto] ALREADY init VIC = 4
  406. [ 1.157971@0] hdmitx: system: change to HDMI mode
  407. [ 1.157973@0] hdmitx: hw: set audio
  408. [ 1.157975@0] hdmitx: hw: hdmitx tx_aud_src = 0
  409. [ 1.157986@0] hdmitx: fs = 0, cd = 4, tmds_clk = 74176
  410. [ 1.157988@0] hdmitx: hw: aud_n_para = 11648
  411. [ 1.157996@0] hdmitx: hw: set channel status
  412. [ 1.405351@2] 00000000 00000000 00000000 00000000 00000000 00000000
  413. [ 1.411677@2] d090 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
  414. [ 1.419997@2] d0b0 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
  415. [ 1.428318@2]
  416. [ 1.428318@2] X8: 0xffffffc0c8c4af80:
  417. [ 1.433604@2] af80 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
  418. [ 1.441924@2] afa0 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
  419. [ 1.450244@2] afc0 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
  420. [ 1.458564@2] afe0 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
  421. [ 1.466884@2] b000 c8c4b800 ffffffc0 00000000 00000000 cb06d760 ffffffc0 ca696f00 ffffffc0
  422. [ 1.475204@2] b020 1b5d8b03 00000005 c8c4b038 ffffffc0 c8c43778 ffffffc0 323a3263 38300030
  423. [ 1.483524@2] b040 50684e34 00000043 00000000 00000000 00000000 00000000 00050005 00000001
  424. [ 1.491844@2] b060 096339c0 ffffff80 ca810800 ffffffc0 00000000 00000000 00000000 00000000
  425. [ 1.500166@2]
  426. [ 1.500166@2] X21: 0xffffffc0c9202780:
  427. [ 1.505537@2] 2780 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
  428. [ 1.513857@2] 27a0 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
  429. [ 1.522177@2] 27c0 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
  430. [ 1.530497@2] 27e0 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
  431. [ 1.538817@2] 2800 0a98e910 ffffff80 00000000 00000000 00000000 00000000 00000000 00000000
  432. [ 1.547137@2] 2820 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
  433. [ 1.555457@2] 2840 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
  434. [ 1.563777@2] 2860 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
  435. [ 1.572099@2]
  436. [ 1.573745@2] Process swapper/0 (pid: 1, stack limit = 0xffffff8020000000)
  437. [ 1.580592@2] Stack: (0xffffff8020003d00 to 0xffffff8020004000)
  438. [ 1.586486@2] 3d00: ffffff8020003d40 ffffff800a25815c ffffff800a990000 ffffff800a990eb8
  439. [ 1.594459@2] 3d20: 0000000000000000 ffffff8009dae000 ffffff800a98f380 ffffff800a98fbd0
  440. [ 1.602432@2] 3d40: ffffff8020003d60 ffffff800a258018 ffffff800a7d70f0 ffffff800a98f000
  441. [ 1.610405@2] 3d60: ffffff8020003dd0 ffffff8009083ac4 ffffff800a257bc0 ffffffc0ca910000
  442. [ 1.618379@2] 3d80: 0000000000000000 ffffff800a282a78 ffffff800a1f6ab0 ffffff800a282a68
  443. [ 1.626352@2] 3da0: ffffff800a210480 ffffff800a88e000 ffffff800a2eb6b0 0000000000000000
  444. [ 1.634325@2] 3dc0: ffffff800a0f4000 ffffff800a0f0000 ffffff8020003e40 ffffff800a210d2c
  445. [ 1.642299@2] 3de0: 0000000000000434 ffffff800a88e000 0000000000000006 ffffff800a282a78
  446. [ 1.650272@2] 3e00: ffffff800a2eac00 0000000000000000 ffffff800a709998 ffffff800a0075f8
  447. [ 1.658245@2] 3e20: 0000000600000006 ffffff800a210480 0000000000000000 ffffff800a1f6ab0
  448. [ 1.666219@2] 3e40: ffffff8020003ea0 ffffff8009cde020 ffffff8009cde008 0000000000000000
  449. [ 1.674192@2] 3e60: 0000000000000000 0000000000000000 0000000000000000 0000000000000000
  450. [ 1.682165@2] 3e80: 0000000000000000 0000000000000000 0000000000000000 ffffff8009083834
  451. [ 1.690139@2] 3ea0: 0000000000000000 ffffff8009083840 ffffff8009cde008 0000000000000000
  452. [ 1.698112@2] 3ec0: 0000000000000000 0000000000000000 0000000000000000 0000000000000000
  453. [ 1.706085@2] 3ee0: 0000000000000000 0000000000000000 0000000000000000 0000000000000000
  454. [ 1.714059@2] 3f00: 0000000000000000 0000000000000000 0000000000000000 0000000000000000
  455. [ 1.722032@2] 3f20: 0000000000000000 0000000000000000 0000000000000000 0000000000000000
  456. [ 1.730005@2] 3f40: 0000000000000000 0000000000000000 0000000000000000 0000000000000000
  457. [ 1.737978@2] 3f60: 0000000000000000 0000000000000000 0000000000000000 0000000000000000
  458. [ 1.745952@2] 3f80: 0000000000000000 0000000000000000 0000000000000000 0000000000000000
  459. [ 1.753925@2] 3fa0: 0000000000000000 0000000000000000 0000000000000000 0000000000000000
  460. [ 1.761898@2] 3fc0: 0000000000000000 0000000000000005 0000000000000000 0000000000000000
  461. [ 1.769872@2] 3fe0: 0000000000000000 0000000000000000 0000000000000000 0000000000000000
  462. [ 1.777845@2] Call trace:
  463. [ 1.780445@2] Exception stack(0xffffff8020003bb0 to 0xffffff8020003ce0)
  464. [ 1.787032@2] 3ba0: ffffff800a98e910 0000007fffffffff
  465. [ 1.795005@2] 3bc0: ffffffc0cf337aa0 ffffff800981c330 0000000000000000 0000000000000000
  466. [ 1.802979@2] 3be0: 0000000000000000 ffffff800981c330 ffffffc0cf32d050 ffffff8020003d00
  467. [ 1.810952@2] 3c00: 0000000000000000 0000000000000000 ffffffc0c8c4b000 0000000000000000
  468. [ 1.818925@2] 3c20: 0101010101010101 0000000000000003 0000000000000028 ff00000000000000
  469. [ 1.826899@2] 3c40: ffffff80a0003c6f ffffffffffffffff 0000000000000001 0000000000000007
  470. [ 1.834872@2] 3c60: 0000000000000001 ffffff800a98e910 ffffff800a98e970 ffffffc0c9202800
  471. [ 1.842845@2] 3c80: ffffff800a93fd20 00000000024080c0 ffffff800a98e000 ffffff800a98fba8
  472. [ 1.850819@2] 3ca0: 0000000000000001 0000000000000001 ffffff800a0f0d88 ffffff8020003d00
  473. [ 1.858792@2] 3cc0: ffffff800981c330 ffffff8020003d00 ffffff800981c340 0000000080000045
  474. [ 1.866768@2] [ffffff8020003d00+ 64][<ffffff800981c340>] create_ge2d_work_queue+0x118/0x168
  475. [ 1.875176@2] [ffffff8020003d40+ 32][<ffffff800a25815c>] video_keeper_init+0x20/0xac
  476. [ 1.882973@2] [ffffff8020003d60+ 112][<ffffff800a258018>] video_init+0x458/0x57c
  477. [ 1.890341@2] [ffffff8020003dd0+ 112][<ffffff8009083ac4>] do_one_initcall+0x44/0x138
  478. [ 1.898053@2] [ffffff8020003e40+ 96][<ffffff800a210d2c>] kernel_init_freeable+0x1a0/0x240
  479. [ 1.906288@2] [ffffff8020003ea0+ 0][<ffffff8009cde020>] kernel_init+0x18/0x108
  480. [ 1.913652@2] [0000000000000000+ 0][<ffffff8009083840>] ret_from_fork+0x10/0x50
  481. [ 1.921107@2] Code: f9400661 a90006b3 f9000675 f9448b00 (f9000035)
  482. [ 1.927358@2] ---[ end trace 2c5a440157a2c577 ]---
  483. [ 1.936379@2] note: swapper/0[1] exited with preempt_count 1
  484. [ 1.937773@3] Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b
  485. [ 1.937773@3]
  486. [ 1.947374@3] SMP: stopping secondary CPUs
  487. [ 1.951272@3] Kernel Offset: disabled
  488. [ 1.954905@3] Ű▒▒r▒,▒FS2!`'▒4▒N▒t[ 1.962493@3] Rebooting in 5 seconds..
  489. [ 6.987721@3] reboot reason 12
  490. bl31 reboot reason: 0xd
  491. bl31 reboot reason: 0xc
  492. system cmd 1.
  493. ERROR: gxbb System R▒
  494.  
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement
Public Pastes
Advertisement
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!