Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- smartctl 6.6 2016-05-31 r4324 [x86_64-linux-4.15.0-36-generic] (local build)
- Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org
- === START OF INFORMATION SECTION ===
- Device Model: SSDPR-CX300-240
- Serial Number: GSM021511
- LU WWN Device Id: 0 000000 000000000
- Firmware Version: SBFM11.2
- User Capacity: 240,057,409,536 bytes [240 GB]
- Sector Size: 512 bytes logical/physical
- Rotation Rate: Solid State Device
- Form Factor: 2.5 inches
- Device is: Not in smartctl database [for details use: -P showall]
- ATA Version is: Unknown(0x0ff8) (minor revision not indicated)
- SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s)
- Local Time is: Sat Oct 20 16:08:47 2018 CEST
- SMART support is: Available - device has SMART capability.
- SMART support is: Enabled
- AAM feature is: Unavailable
- APM feature is: Unavailable
- Rd look-ahead is: Enabled
- Write cache is: Enabled
- ATA Security is: Disabled, frozen [SEC2]
- === START OF READ SMART DATA SECTION ===
- SMART overall-health self-assessment test result: PASSED
- General SMART Values:
- Offline data collection status: (0x00) Offline data collection activity
- was never started.
- Auto Offline Data Collection: Disabled.
- Self-test execution status: ( 0) The previous self-test routine completed
- without error or no self-test has ever
- been run.
- Total time to complete Offline
- data collection: (65535) seconds.
- Offline data collection
- capabilities: (0x79) SMART execute Offline immediate.
- No Auto Offline data collection support.
- Suspend Offline collection upon new
- command.
- Offline surface scan supported.
- Self-test supported.
- Conveyance Self-test supported.
- Selective Self-test supported.
- SMART capabilities: (0x0003) Saves SMART data before entering
- power-saving mode.
- Supports SMART auto save timer.
- Error logging capability: (0x01) Error logging supported.
- General Purpose Logging supported.
- Short self-test routine
- recommended polling time: ( 2) minutes.
- Extended self-test routine
- recommended polling time: ( 30) minutes.
- Conveyance self-test routine
- recommended polling time: ( 6) minutes.
- SMART Attributes Data Structure revision number: 16
- Vendor Specific SMART Attributes with Thresholds:
- ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
- 1 Raw_Read_Error_Rate PO-R-- 100 100 050 - 0
- 9 Power_On_Hours -O--C- 100 100 000 - 504
- 12 Power_Cycle_Count -O--C- 100 100 000 - 259
- 168 Unknown_Attribute -O--C- 100 100 000 - 0
- 170 Unknown_Attribute PO---- 077 077 010 - 333
- 173 Unknown_Attribute -O--C- 100 100 000 - 327695
- 192 Power-Off_Retract_Count -O--C- 100 100 000 - 53
- 194 Temperature_Celsius PO---K 067 067 000 - 33 (Min/Max 33/33)
- 218 Unknown_Attribute PO-R-- 100 100 050 - 0
- 231 Temperature_Celsius PO--C- 100 100 000 - 99
- 241 Total_LBAs_Written -O--C- 100 100 000 - 1001
- ||||||_ K auto-keep
- |||||__ C event count
- ||||___ R error rate
- |||____ S speed/performance
- ||_____ O updated online
- |______ P prefailure warning
- General Purpose Log Directory Version 1
- SMART Log Directory Version 1 [multi-sector log support]
- Address Access R/W Size Description
- 0x00 GPL,SL R/O 1 Log Directory
- 0x01 SL R/O 1 Summary SMART error log
- 0x02 SL R/O 51 Comprehensive SMART error log
- 0x03 GPL R/O 64 Ext. Comprehensive SMART error log
- 0x04 GPL,SL R/O 8 Device Statistics log
- 0x06 SL R/O 1 SMART self-test log
- 0x07 GPL R/O 1 Extended self-test log
- 0x09 SL R/W 1 Selective self-test log
- 0x10 GPL R/O 1 SATA NCQ Queued Error log
- 0x11 GPL R/O 1 SATA Phy Event Counters log
- 0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log
- 0x80-0x9f GPL,SL R/W 16 Host vendor specific log
- SMART Extended Comprehensive Error Log Version: 1 (64 sectors)
- No Errors Logged
- SMART Extended Self-test Log Version: 1 (1 sectors)
- Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
- # 1 Short offline Completed without error 00% 502 -
- # 2 Extended offline Completed without error 00% 485 -
- # 3 Short offline Aborted by host 00% 485 -
- # 4 Short offline Completed without error 00% 485 -
- SMART Selective self-test log data structure revision number 0
- Note: revision number not 1 implies that no selective self-test has ever been run
- SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
- 1 0 0 Not_testing
- 2 0 0 Not_testing
- 3 0 0 Not_testing
- 4 0 0 Not_testing
- 5 0 0 Not_testing
- Selective self-test flags (0x0):
- After scanning selected spans, do NOT read-scan remainder of disk.
- If Selective self-test is pending on power-up, resume after 0 minute delay.
- SCT Commands not supported
- Device Statistics (GP Log 0x04)
- Page Offset Size Value Flags Description
- 0x01 ===== = = === == General Statistics (rev 1) ==
- 0x01 0x008 4 259 --- Lifetime Power-On Resets
- 0x01 0x010 4 504 --- Power-on Hours
- 0x01 0x018 6 2100449810 --- Logical Sectors Written
- 0x01 0x028 6 1902820768 --- Logical Sectors Read
- 0x04 ===== = = === == General Errors Statistics (rev 1) ==
- 0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors
- 0x05 ===== = = === == Temperature Statistics (rev 1) ==
- 0x05 0x008 1 33 --- Current Temperature
- 0x05 0x020 1 33 --- Highest Temperature
- 0x05 0x028 1 33 --- Lowest Temperature
- 0x06 ===== = = === == Transport Statistics (rev 1) ==
- 0x06 0x018 4 0 --- Number of Interface CRC Errors
- 0x07 ===== = = === == Solid State Device Statistics (rev 1) ==
- 0x07 0x008 1 0 --- Percentage Used Endurance Indicator
- |||_ C monitored condition met
- ||__ D supports DSN
- |___ N normalized value
- SATA Phy Event Counters (GP Log 0x11)
- ID Size Value Description
- 0x0001 2 0 Command failed due to ICRC error
- 0x0003 2 0 R_ERR response for device-to-host data FIS
- 0x0004 2 0 R_ERR response for host-to-device data FIS
- 0x0006 2 0 R_ERR response for device-to-host non-data FIS
- 0x0007 2 0 R_ERR response for host-to-device non-data FIS
- 0x0008 2 0 Device-to-host non-data FIS retries
- 0x0009 4 4 Transition from drive PhyRdy to drive PhyNRdy
- 0x000a 4 5 Device-to-host register FISes sent due to a COMRESET
- 0x000f 2 0 R_ERR response for host-to-device data FIS, CRC
- 0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC
- 0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC
- 0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement