SHARE
TWEET

SMART test

a guest May 25th, 2019 135 Never
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
  1. smartctl 7.0 2019-03-31 r4903 [x86_64-linux-5.0.17-300.fc30.x86_64] (local build)
  2. Copyright (C) 2002-18, Bruce Allen, Christian Franke, www.smartmontools.org
  3.  
  4. === START OF INFORMATION SECTION ===
  5. Model Family:     Samsung based SSDs
  6. Device Model:     Samsung SSD 850 EVO 500GB
  7. Serial Number:    S2RANX0H615322M
  8. LU WWN Device Id: 5 002538 d40fa67b7
  9. Firmware Version: EMT02B6Q
  10. User Capacity:    500,107,862,016 bytes [500 GB]
  11. Sector Size:      512 bytes logical/physical
  12. Rotation Rate:    Solid State Device
  13. Form Factor:      2.5 inches
  14. Device is:        In smartctl database [for details use: -P show]
  15. ATA Version is:   ACS-2, ATA8-ACS T13/1699-D revision 4c
  16. SATA Version is:  SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s)
  17. Local Time is:    Sat May 25 21:07:03 2019 CDT
  18. SMART support is: Available - device has SMART capability.
  19. SMART support is: Enabled
  20.  
  21. === START OF READ SMART DATA SECTION ===
  22. SMART overall-health self-assessment test result: PASSED
  23.  
  24. General SMART Values:
  25. Offline data collection status:  (0x00) Offline data collection activity
  26.                                         was never started.
  27.                                         Auto Offline Data Collection: Disabled.
  28. Self-test execution status:      (   0) The previous self-test routine completed
  29.                                         without error or no self-test has ever
  30.                                         been run.
  31. Total time to complete Offline
  32. data collection:                (    0) seconds.
  33. Offline data collection
  34. capabilities:                    (0x53) SMART execute Offline immediate.
  35.                                         Auto Offline data collection on/off support.
  36.                                         Suspend Offline collection upon new
  37.                                         command.
  38.                                         No Offline surface scan supported.
  39.                                         Self-test supported.
  40.                                         No Conveyance Self-test supported.
  41.                                         Selective Self-test supported.
  42. SMART capabilities:            (0x0003) Saves SMART data before entering
  43.                                         power-saving mode.
  44.                                         Supports SMART auto save timer.
  45. Error logging capability:        (0x01) Error logging supported.
  46.                                         General Purpose Logging supported.
  47. Short self-test routine
  48. recommended polling time:        (   2) minutes.
  49. Extended self-test routine
  50. recommended polling time:        ( 265) minutes.
  51. SCT capabilities:              (0x003d) SCT Status supported.
  52.                                         SCT Error Recovery Control supported.
  53.                                         SCT Feature Control supported.
  54.                                         SCT Data Table supported.
  55.  
  56. SMART Attributes Data Structure revision number: 1
  57. Vendor Specific SMART Attributes with Thresholds:
  58. ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  59.   5 Reallocated_Sector_Ct   0x0033   100   100   010    Pre-fail  Always       -       0
  60.   9 Power_On_Hours          0x0032   098   098   000    Old_age   Always       -       9951
  61.  12 Power_Cycle_Count       0x0032   094   094   000    Old_age   Always       -       5775
  62. 177 Wear_Leveling_Count     0x0013   099   099   000    Pre-fail  Always       -       19
  63. 179 Used_Rsvd_Blk_Cnt_Tot   0x0013   100   100   010    Pre-fail  Always       -       0
  64. 181 Program_Fail_Cnt_Total  0x0032   100   100   010    Old_age   Always       -       0
  65. 182 Erase_Fail_Count_Total  0x0032   100   100   010    Old_age   Always       -       0
  66. 183 Runtime_Bad_Block       0x0013   100   100   010    Pre-fail  Always       -       0
  67. 187 Uncorrectable_Error_Cnt 0x0032   100   100   000    Old_age   Always       -       0
  68. 190 Airflow_Temperature_Cel 0x0032   069   044   000    Old_age   Always       -       31
  69. 195 ECC_Error_Rate          0x001a   200   200   000    Old_age   Always       -       0
  70. 199 CRC_Error_Count         0x003e   100   100   000    Old_age   Always       -       0
  71. 235 POR_Recovery_Count      0x0012   099   099   000    Old_age   Always       -       1163
  72. 241 Total_LBAs_Written      0x0032   099   099   000    Old_age   Always       -       20627221498
  73.  
  74. SMART Error Log Version: 1
  75. No Errors Logged
  76.  
  77. SMART Self-test log structure revision number 1
  78. Num  Test_Description    Status                  Remaining  LifeTime(hours)  LBA_of_first_error
  79. # 1  Short offline       Completed without error       00%      9951         -
  80. # 2  Short offline       Completed without error       00%      9828         -
  81. # 3  Short offline       Completed without error       00%      7412         -
  82. # 4  Short offline       Completed without error       00%      4664         -
  83. # 5  Short offline       Completed without error       00%      1680         -
  84. # 6  Short offline       Interrupted (host reset)      50%      1680         -
  85. # 7  Short offline       Completed without error       00%       864         -
  86. # 8  Short offline       Completed without error       00%       864         -
  87. # 9  Short offline       Interrupted (host reset)      60%       672         -
  88.  
  89. SMART Selective self-test log data structure revision number 1
  90.  SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
  91.     1        0        0  Not_testing
  92.     2        0        0  Not_testing
  93.     3        0        0  Not_testing
  94.     4        0        0  Not_testing
  95.     5        0        0  Not_testing
  96.   255        0    65535  Read_scanning was never started
  97. Selective self-test flags (0x0):
  98.   After scanning selected spans, do NOT read-scan remainder of disk.
  99. If Selective self-test is pending on power-up, resume after 0 minute delay.
RAW Paste Data
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy. OK, I Understand
 
Top