API tools faq
paste
Advertisement
Cool_Lamer

Untitled

Cool_Lamer
Nov 15th, 2016
92
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 9.93 KB | None | 0 0
raw download clone embed print report
  1. # smartctl -a /dev/sdg
  2. smartctl 6.4 2014-10-07 r4002 [x86_64-linux-3.16.0-4-amd64] (local build)
  3. Copyright (C) 2002-14, Bruce Allen, Christian Franke, www.smartmontools.org
  4.  
  5. === START OF INFORMATION SECTION ===
  6. Device Model: HGST HUS726020ALE614
  7. Serial Number: N4G1XHEK
  8. LU WWN Device Id: 5 000cca 245c0df59
  9. Firmware Version: APGNW7J0
  10. User Capacity: 2 000 398 934 016 bytes [2,00 TB]
  11. Sector Sizes: 512 bytes logical, 4096 bytes physical
  12. Rotation Rate: 7200 rpm
  13. Form Factor: 3.5 inches
  14. Device is: Not in smartctl database [for details use: -P showall]
  15. ATA Version is: ACS-2, ATA8-ACS T13/1699-D revision 4
  16. SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s)
  17. Local Time is: Tue Nov 15 11:07:37 2016 MSK
  18. SMART support is: Available - device has SMART capability.
  19. SMART support is: Enabled
  20.  
  21. === START OF READ SMART DATA SECTION ===
  22. SMART overall-health self-assessment test result: PASSED
  23.  
  24. General SMART Values:
  25. Offline data collection status: (0x80) Offline data collection activity
  26. was never started.
  27. Auto Offline Data Collection: Enabled.
  28. Self-test execution status: ( 0) The previous self-test routine completed
  29. without error or no self-test has ever
  30. been run.
  31. Total time to complete Offline
  32. data collection: ( 113) seconds.
  33. Offline data collection
  34. capabilities: (0x5b) SMART execute Offline immediate.
  35. Auto Offline data collection on/off support.
  36. Suspend Offline collection upon new
  37. command.
  38. Offline surface scan supported.
  39. Self-test supported.
  40. No Conveyance Self-test supported.
  41. Selective Self-test supported.
  42. SMART capabilities: (0x0003) Saves SMART data before entering
  43. power-saving mode.
  44. Supports SMART auto save timer.
  45. Error logging capability: (0x01) Error logging supported.
  46. General Purpose Logging supported.
  47. Short self-test routine
  48. recommended polling time: ( 2) minutes.
  49. Extended self-test routine
  50. recommended polling time: ( 288) minutes.
  51. SCT capabilities: (0x003d) SCT Status supported.
  52. SCT Error Recovery Control supported.
  53. SCT Feature Control supported.
  54. SCT Data Table supported.
  55.  
  56. SMART Attributes Data Structure revision number: 16
  57. Vendor Specific SMART Attributes with Thresholds:
  58. ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
  59. 1 Raw_Read_Error_Rate 0x000b 100 100 016 Pre-fail Always - 0
  60. 2 Throughput_Performance 0x0005 138 138 054 Pre-fail Offline - 100
  61. 3 Spin_Up_Time 0x0007 160 160 024 Pre-fail Always - 195 (Average 177)
  62. 4 Start_Stop_Count 0x0012 100 100 000 Old_age Always - 93
  63. 5 Reallocated_Sector_Ct 0x0033 100 100 005 Pre-fail Always - 0
  64. 7 Seek_Error_Rate 0x000b 100 100 067 Pre-fail Always - 0
  65. 8 Seek_Time_Performance 0x0005 128 128 020 Pre-fail Offline - 18
  66. 9 Power_On_Hours 0x0012 100 100 000 Old_age Always - 5804
  67. 10 Spin_Retry_Count 0x0013 100 100 060 Pre-fail Always - 0
  68. 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 53
  69. 192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 322
  70. 193 Load_Cycle_Count 0x0012 100 100 000 Old_age Always - 322
  71. 194 Temperature_Celsius 0x0002 171 171 000 Old_age Always - 35 (Min/Max 22/47)
  72. 196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 0
  73. 197 Current_Pending_Sector 0x0022 100 100 000 Old_age Always - 0
  74. 198 Offline_Uncorrectable 0x0008 100 100 000 Old_age Offline - 0
  75. 199 UDMA_CRC_Error_Count 0x000a 155 155 000 Old_age Always - 105210
  76.  
  77. SMART Error Log Version: 1
  78. ATA Error Count: 65535 (device log contains only the most recent five errors)
  79. CR = Command Register [HEX]
  80. FR = Features Register [HEX]
  81. SC = Sector Count Register [HEX]
  82. SN = Sector Number Register [HEX]
  83. CL = Cylinder Low Register [HEX]
  84. CH = Cylinder High Register [HEX]
  85. DH = Device/Head Register [HEX]
  86. DC = Device Command Register [HEX]
  87. ER = Error register [HEX]
  88. ST = Status register [HEX]
  89. Powered_Up_Time is measured from power on, and printed as
  90. DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
  91. SS=sec, and sss=millisec. It "wraps" after 49.710 days.
  92.  
  93. Error 65535 occurred at disk power-on lifetime: 5804 hours (241 days + 20 hours)
  94. When the command that caused the error occurred, the device was active or idle.
  95.  
  96. After command completion occurred, registers were:
  97. ER ST SC SN CL CH DH
  98. -- -- -- -- -- -- --
  99. 84 41 00 00 00 00 00 Error: ICRC, ABRT at LBA = 0x00000000 = 0
  100.  
  101. Commands leading to the command that caused the error were:
  102. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  103. -- -- -- -- -- -- -- -- ---------------- --------------------
  104. 60 80 00 00 da 00 40 00 00:16:34.470 READ FPDMA QUEUED
  105. 60 40 08 38 da 00 40 00 00:16:34.468 READ FPDMA QUEUED
  106. 2f 00 01 10 00 00 00 00 00:16:34.462 READ LOG EXT
  107. 2f 00 01 10 00 00 00 00 00:16:34.462 READ LOG EXT
  108. 60 80 00 00 da 00 40 00 00:16:34.453 READ FPDMA QUEUED
  109.  
  110. Error 65534 occurred at disk power-on lifetime: 5804 hours (241 days + 20 hours)
  111. When the command that caused the error occurred, the device was active or idle.
  112.  
  113. After command completion occurred, registers were:
  114. ER ST SC SN CL CH DH
  115. -- -- -- -- -- -- --
  116. 84 41 00 00 00 00 00 Error: ICRC, ABRT at LBA = 0x00000000 = 0
  117.  
  118. Commands leading to the command that caused the error were:
  119. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  120. -- -- -- -- -- -- -- -- ---------------- --------------------
  121. 60 80 00 00 da 00 40 00 00:16:34.462 READ FPDMA QUEUED
  122. 2f 00 01 10 00 00 00 00 00:16:34.453 READ LOG EXT
  123. 2f 00 01 10 00 00 00 00 00:16:34.453 READ LOG EXT
  124. 60 40 08 38 da 00 40 00 00:16:34.452 READ FPDMA QUEUED
  125. 60 40 00 f8 d9 00 40 00 00:16:34.452 READ FPDMA QUEUED
  126.  
  127. Error 65533 occurred at disk power-on lifetime: 5804 hours (241 days + 20 hours)
  128. When the command that caused the error occurred, the device was active or idle.
  129.  
  130. After command completion occurred, registers were:
  131. ER ST SC SN CL CH DH
  132. -- -- -- -- -- -- --
  133. 84 41 00 00 00 00 00 Error: ICRC, ABRT at LBA = 0x00000000 = 0
  134.  
  135. Commands leading to the command that caused the error were:
  136. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  137. -- -- -- -- -- -- -- -- ---------------- --------------------
  138. 60 40 08 38 da 00 40 00 00:16:34.453 READ FPDMA QUEUED
  139. 60 40 00 f8 d9 00 40 00 00:16:34.452 READ FPDMA QUEUED
  140. 2f 00 01 10 00 00 00 00 00:16:34.446 READ LOG EXT
  141. 2f 00 01 10 00 00 00 00 00:16:34.445 READ LOG EXT
  142. 60 40 08 38 da 00 40 00 00:16:34.445 READ FPDMA QUEUED
  143.  
  144. Error 65532 occurred at disk power-on lifetime: 5804 hours (241 days + 20 hours)
  145. When the command that caused the error occurred, the device was active or idle.
  146.  
  147. After command completion occurred, registers were:
  148. ER ST SC SN CL CH DH
  149. -- -- -- -- -- -- --
  150. 84 41 00 00 00 00 00 Error: ICRC, ABRT at LBA = 0x00000000 = 0
  151.  
  152. Commands leading to the command that caused the error were:
  153. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  154. -- -- -- -- -- -- -- -- ---------------- --------------------
  155. 60 40 00 f8 d9 00 40 00 00:16:34.445 READ FPDMA QUEUED
  156. 60 40 08 38 da 00 40 00 00:16:34.445 READ FPDMA QUEUED
  157. 60 20 00 98 d9 00 40 00 00:16:34.304 READ FPDMA QUEUED
  158. 60 40 00 b8 d9 00 40 00 00:16:34.296 READ FPDMA QUEUED
  159. 2f 00 01 10 00 00 00 00 00:16:34.295 READ LOG EXT
  160.  
  161. Error 65531 occurred at disk power-on lifetime: 5804 hours (241 days + 20 hours)
  162. When the command that caused the error occurred, the device was active or idle.
  163.  
  164. After command completion occurred, registers were:
  165. ER ST SC SN CL CH DH
  166. -- -- -- -- -- -- --
  167. 84 41 00 00 00 00 00 Error: ICRC, ABRT at LBA = 0x00000000 = 0
  168.  
  169. Commands leading to the command that caused the error were:
  170. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  171. -- -- -- -- -- -- -- -- ---------------- --------------------
  172. 60 20 00 98 d9 00 40 00 00:16:34.295 READ FPDMA QUEUED
  173. 60 10 00 88 d9 00 40 00 00:16:34.295 READ FPDMA QUEUED
  174. 60 08 00 80 d9 00 40 00 00:16:34.288 READ FPDMA QUEUED
  175. 2f 00 01 10 00 00 00 00 00:16:34.287 READ LOG EXT
  176. 2f 00 01 10 00 00 00 00 00:16:34.287 READ LOG EXT
  177.  
  178. SMART Self-test log structure revision number 1
  179. No self-tests have been logged. [To run self-tests, use: smartctl -t]
  180.  
  181. SMART Selective self-test log data structure revision number 1
  182. SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
  183. 1 0 0 Not_testing
  184. 2 0 0 Not_testing
  185. 3 0 0 Not_testing
  186. 4 0 0 Not_testing
  187. 5 0 0 Not_testing
  188. Selective self-test flags (0x0):
  189. After scanning selected spans, do NOT read-scan remainder of disk.
  190. If Selective self-test is pending on power-up, resume after 0 minute delay.
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement
Public Pastes
Advertisement
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!