ROCK Pi 4 Collabora image boot log

DDR Version 1.22 20190506
In
channel 0
CS = 0
MR0=0x98
MR4=0x3
MR5=0xFF
MR8=0x8
MR12=0x72
MR14=0x72
MR18=0x0
MR19=0x0
MR24=0x8
MR25=0x0
CS = 1
MR0=0x18
MR4=0x3
MR5=0xFF
MR8=0x8
MR12=0x72
MR14=0x72
MR18=0x0
MR19=0x0
MR24=0x8
MR25=0x0
channel 1
CS = 0
MR0=0x98
MR4=0x3
MR5=0xFF
MR8=0x8
MR12=0x72
MR14=0x72
MR18=0x0
MR19=0x0
MR24=0x8
MR25=0x0
CS = 1
MR0=0x18
MR4=0x3
MR5=0xFF
MR8=0x8
MR12=0x72
MR14=0x72
MR18=0x0
MR19=0x0
MR24=0x8
MR25=0x0
channel 0 training pass!
channel 1 training pass!
change freq to 416MHz 0,1
Channel 0: LPDDR4,416MHz
Bus Width=32 Col=10 Bank=8 Row=15/15 CS=2 Die Bus-Width=16 Size=2048MB
Channel 1: LPDDR4,416MHz
Bus Width=32 Col=10 Bank=8 Row=15/15 CS=2 Die Bus-Width=16 Size=2048MB
256B stride
channel 0
CS = 0
MR0=0x98
MR4=0x82
MR5=0xFF
MR8=0x8
MR12=0x72
MR14=0x72
MR18=0x0
MR19=0x0
MR24=0x8
MR25=0x0
CS = 1
MR0=0x18
MR4=0x82
MR5=0xFF
MR8=0x8
MR12=0x72
MR14=0x72
MR18=0x0
MR19=0x0
MR24=0x8
MR25=0x0
channel 1
CS = 0
MR0=0x98
MR4=0x82
MR5=0xFF
MR8=0x8
MR12=0x72
MR14=0x72
MR18=0x0
MR19=0x0
MR24=0x8
MR25=0x0
CS = 1
MR0=0x18
MR4=0x82
MR5=0xFF
MR8=0x8
MR12=0x72
MR14=0x72
MR18=0x0
MR19=0x0
MR24=0x8
MR25=0x0
channel 0 training pass!
channel 1 training pass!
channel 0, cs 0, advanced training done
channel 0, cs 1, advanced training done
channel 1, cs 0, advanced training done
channel 1, cs 1, advanced training done
change freq to 856MHz 1,0
ch 0 ddrconfig = 0x101, ddrsize = 0x2020
ch 1 ddrconfig = 0x101, ddrsize = 0x2020
pmugrf_os_reg[2] = 0x3AA1FAA1, stride = 0xD
OUT
Boot1: 2019-03-14, version: 1.19
CPUId = 0x0
ChipType = 0x10, 254
SdmmcInit=2 0
BootCapSize=100000
UserCapSize=14800MB
FwPartOffset=2000 , 100000
mmc0:cmd8,20
mmc0:cmd5,20
mmc0:cmd55,20
mmc0:cmd1,20
mmc0:cmd8,20
mmc0:cmd5,20
mmc0:cmd55,20
mmc0:cmd1,20
mmc0:cmd8,20
mmc0:cmd5,20
mmc0:cmd55,20
mmc0:cmd1,20
SdmmcInit=0 1
StorageInit ok = 67500
SecureMode = 0
SecureInit read PBA: 0x4
SecureInit read PBA: 0x404
SecureInit read PBA: 0x804
SecureInit read PBA: 0xc04
SecureInit read PBA: 0x1004
SecureInit read PBA: 0x1404
SecureInit read PBA: 0x1804
SecureInit read PBA: 0x1c04
SecureInit ret = 0, SecureMode = 0
atags_set_bootdev: ret:(0)
GPT part:  0, name:             root, start:0x8000, size:0x1cb0511
no find partition:uboot.
LoadTrust Addr:0x4000
No find bl30.bin
Load uboot, ReadLba = 2000
Load OK, addr=0x200000, size=0x9f604
RunBL31 0x10000

NOTICE:  BL31: v1.3(debug):0e7a845
NOTICE:  BL31: Built : 16:13:46, Apr 17 2019
NOTICE:  BL31: Rockchip release version: v1.1
INFO:    GICv3 with legacy support detected. ARM GICV3 driver initialized in EL3
INFO:    Using opteed sec cpu_context!
INFO:    boot cpu mask: 0
INFO:    plat_rockchip_pmu_init(1181): pd status 3e
INFO:    BL31: Initializing runtime services
INFO:    BL31: Initializing BL32
INF [0x0] TEE-CORE:init_primary_helper:337: Initializing (1.1.0-222-g19950c70 #140 Thu Jul  4 03:05:20 UTC 2019 aarch64)

INF [0x0] TEE-CORE:init_primary_helper:338: Release version: 1.2

INF [0x0] TEE-CORE:init_teecore:83: teecore inits done
INFO:    BL31: Preparing for EL3 exit to normal world
INFO:    Entry point address = 0x200000
INFO:    SPSR = 0x3c9


U-Boot 2019.07 (Jul 24 2019 - 11:11:18 +0000)

Model: Radxa ROCK Pi 4
DRAM:  3.9 GiB
Cannot find regulator pwm init_voltage
MMC:   dwmmc@fe320000: 1, sdhci@fe330000: 0
Loading Environment from MMC... Card did not respond to voltage select!
*** Warning - No block device, using default environment

In:    serial@ff1a0000
Out:   serial@ff1a0000
Err:   serial@ff1a0000
Model: Radxa ROCK Pi 4
rockchip_dnl_key_pressed: adc_channel_single_shot fail!
Net:   eth0: ethernet@fe300000
Hit any key to stop autoboot:  2  1  0
switch to partitions #0, OK
mmc0(part 0) is current device
Scanning mmc 0:1...
Found /boot/extlinux/extlinux.conf
Retrieving file: /boot/extlinux/extlinux.conf
827 bytes read in 47 ms (16.6 KiB/s)
U-Boot menu
1:	Debian GNU/Linux kernel 5.3.0-rc1-g2ca7ec1e8750
2:	Debian GNU/Linux kernel 5.3.0-rc1-g2ca7ec1e8750 (rescue target)
Enter choice: 1:	Debian GNU/Linux kernel 5.3.0-rc1-g2ca7ec1e8750
Retrieving file: /boot/initrd.img-5.3.0-rc1-g2ca7ec1e8750
7047447 bytes read in 758 ms (8.9 MiB/s)
Retrieving file: /boot/vmlinuz-5.3.0-rc1-g2ca7ec1e8750
25360896 bytes read in 2642 ms (9.2 MiB/s)
append: root=UUID=25b740b5-c924-4df2-bb9a-341bf9e1bd5f rw rootwait
Retrieving file: /usr/lib/linux-image-5.3.0-rc1-g2ca7ec1e8750/rockchip/rk3399-rock-pi-4.dtb
54180 bytes read in 90 ms (587.9 KiB/s)
## Flattened Device Tree blob at 01f00000
   Booting using the fdt blob at 0x1f00000
   Loading Ramdisk to f5870000, end f5f28917 ... OK
   Loading Device Tree to 00000000f585f000, end 00000000f586f3a3 ... OK

Starting kernel ...

[    0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd034]
[    0.000000] Linux version 5.3.0-rc1-g2ca7ec1e8750 (root@runner-8211bea0-project-1900-concurrent-0) (gcc version 8.3.0 (Debian 8.3.0-2)) #1 SMP Wed Jul 24 12:55:50 UTC 2019
[    0.000000] Machine model: Radxa ROCK Pi 4
[    0.000000] efi: Getting EFI parameters from FDT:
[    0.000000] efi: UEFI not found.
[    0.000000] cma: Reserved 32 MiB at 0x00000000f6000000
[    0.000000] NUMA: No NUMA configuration found
[    0.000000] NUMA: Faking a node at [mem 0x0000000000200000-0x00000000f7ffffff]
[    0.000000] NUMA: NODE_DATA [mem 0xf5125840-0xf5126fff]
[    0.000000] Zone ranges:
[    0.000000]   DMA32    [mem 0x0000000000200000-0x00000000f7ffffff]
[    0.000000]   Normal   empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000200000-0x00000000f7ffffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000200000-0x00000000f7ffffff]
[    0.000000] psci: probing for conduit method from DT.
[    0.000000] psci: PSCIv1.0 detected in firmware.
[    0.000000] psci: Using standard PSCI v0.2 function IDs
[    0.000000] psci: Trusted OS migration not required
[    0.000000] psci: SMC Calling Convention v1.0
[    0.000000] percpu: Embedded 23 pages/cpu s56472 r8192 d29544 u94208
[    0.000000] Detected VIPT I-cache on CPU0
[    0.000000] CPU features: detected: ARM erratum 845719
[    0.000000] CPU features: detected: GIC system register CPU interface
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 999432
[    0.000000] Policy zone: DMA32
[    0.000000] Kernel command line: root=UUID=25b740b5-c924-4df2-bb9a-341bf9e1bd5f rw rootwait
[    0.000000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes, linear)
[    0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes, linear)
[    0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
[    0.000000] Memory: 3914848K/4061184K available (11580K kernel code, 1790K rwdata, 6016K rodata, 5312K init, 445K bss, 113568K reserved, 32768K cma-reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1
[    0.000000] rcu: Hierarchical RCU implementation.
[    0.000000] rcu: 	RCU event tracing is enabled.
[    0.000000] rcu: 	RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=6.
[    0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
[    0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=6
[    0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
[    0.000000] GICv3: GIC: Using split EOI/Deactivate mode
[    0.000000] GICv3: Distributor has no Range Selector support
[    0.000000] GICv3: no VLPI support, no direct LPI support
[    0.000000] GICv3: CPU0: found redistributor 0 region 0:0x00000000fef00000
[    0.000000] ITS [mem 0xfee20000-0xfee3ffff]
[    0.000000] ITS@0x00000000fee20000: allocated 65536 Devices @f0480000 (flat, esz 8, psz 64K, shr 0)
[    0.000000] ITS: using cache flushing for cmd queue
[    0.000000] GICv3: using LPI property table @0x00000000f0440000
[    0.000000] GIC: using cache flushing for LPI property table
[    0.000000] GICv3: CPU0: using allocated LPI pending table @0x00000000f0450000
[    0.000000] GICv3: GIC: PPI partition interrupt-partition-0[0] { /cpus/cpu@0[0] /cpus/cpu@1[1] /cpus/cpu@2[2] /cpus/cpu@3[3] }
[    0.000000] GICv3: GIC: PPI partition interrupt-partition-1[1] { /cpus/cpu@100[4] /cpus/cpu@101[5] }
[    0.000000] random: get_random_bytes called from start_kernel+0x2f0/0x484 with crng_init=0
[    0.000000] arch_timer: cp15 timer(s) running at 24.00MHz (phys).
[    0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
[    0.000009] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
[    0.003457] Console: colour dummy device 80x25
[    0.004483] printk: console [tty0] enabled
[    0.004652] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=96000)
[    0.004699] pid_max: default: 32768 minimum: 301
[    0.004893] LSM: Security Framework initializing
[    0.005046] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
[    0.005113] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
[    0.008041] ASID allocator initialised with 32768 entries
[    0.008223] rcu: Hierarchical SRCU implementation.
[    0.008638] Platform MSI: interrupt-controller@fee20000 domain created
[    0.009141] PCI/MSI: /interrupt-controller@fee00000/interrupt-controller@fee20000 domain created
[    0.016380] EFI services will not be available.
[    0.016962] smp: Bringing up secondary CPUs ...
[    0.017803] Detected VIPT I-cache on CPU1
[    0.017854] GICv3: CPU1: found redistributor 1 region 0:0x00000000fef20000
[    0.017874] GICv3: CPU1: using allocated LPI pending table @0x00000000f0460000
[    0.017931] CPU1: Booted secondary processor 0x0000000001 [0x410fd034]
[    0.018872] Detected VIPT I-cache on CPU2
[    0.018913] GICv3: CPU2: found redistributor 2 region 0:0x00000000fef40000
[    0.018928] GICv3: CPU2: using allocated LPI pending table @0x00000000f0470000
[    0.018969] CPU2: Booted secondary processor 0x0000000002 [0x410fd034]
[    0.019901] Detected VIPT I-cache on CPU3
[    0.019939] GICv3: CPU3: found redistributor 3 region 0:0x00000000fef60000
[    0.019955] GICv3: CPU3: using allocated LPI pending table @0x00000000f0500000
[    0.019996] CPU3: Booted secondary processor 0x0000000003 [0x410fd034]
[    0.024194] CPU features: detected: EL2 vector hardening
[    0.024465] ARM_SMCCC_ARCH_WORKAROUND_1 missing from firmware
[    0.024802] Detected PIPT I-cache on CPU4
[    0.025991] GICv3: CPU4: found redistributor 100 region 0:0x00000000fef80000
[    0.026421] GICv3: CPU4: using allocated LPI pending table @0x00000000f0510000
[    0.027539] CPU4: Booted secondary processor 0x0000000100 [0x410fd082]
[    0.036003] Detected PIPT I-cache on CPU5
[    0.037154] GICv3: CPU5: found redistributor 101 region 0:0x00000000fefa0000
[    0.037565] GICv3: CPU5: using allocated LPI pending table @0x00000000f0520000
[    0.038562] CPU5: Booted secondary processor 0x0000000101 [0x410fd082]
[    0.042365] smp: Brought up 1 node, 6 CPUs
[    0.042825] SMP: Total of 6 processors activated.
[    0.042867] CPU features: detected: 32-bit EL0 Support
[    0.042905] CPU features: detected: CRC32 instructions
[    0.058267] CPU: All CPU(s) started at EL2
[    0.058832] alternatives: patching kernel code
[    0.078729] devtmpfs: initialized
[    0.566009] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[    0.567841] futex hash table entries: 2048 (order: 5, 131072 bytes, linear)
[    0.613939] pinctrl core: initialized pinctrl subsystem
[    0.685623] DMI not present or invalid.
[    0.706087] NET: Registered protocol family 16
[    0.734183] audit: initializing netlink subsys (disabled)
[    0.739696] audit: type=2000 audit(0.732:1): state=initialized audit_enabled=0 res=1
[    0.803469] cpuidle: using governor menu
[    0.813994] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
[    0.877834] DMA: preallocated 256 KiB pool for atomic allocations
[    0.954807] Serial: AMBA PL011 UART driver
[    3.101696] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
[    3.103523] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages
[    3.104297] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[    3.104999] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages
[    3.170032] cryptd: max_cpu_qlen set to 1000
[    3.324876] ACPI: Interpreter disabled.
[    3.418772] vcc5v0_sys: supplied by vcc12v_dcin
[    3.437468] vcc3v3_pcie: supplied by vcc5v0_sys
[    3.451136] vcc3v3_sys: supplied by vcc5v0_sys
[    3.467768] vcc5v0_host: supplied by vcc5v0_sys
[    3.485205] vcc5v0_typec: supplied by vcc5v0_sys
[    3.613404] vgaarb: loaded
[    3.629596] SCSI subsystem initialized
[    3.647543] usbcore: registered new interface driver usbfs
[    3.650291] usbcore: registered new interface driver hub
[    3.653877] usbcore: registered new device driver usb
[    3.714606] pps_core: LinuxPPS API ver. 1 registered
[    3.715267] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    3.716497] PTP clock support registered
[    3.727291] EDAC MC: Ver: 3.0.0
[    3.803380] FPGA manager framework
[    3.807938] Advanced Linux Sound Architecture Driver Initialized.
[    3.835356] clocksource: Switched to clocksource arch_sys_counter
[    3.844560] VFS: Disk quotas dquot_6.6.0
[    3.848244] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    3.860325] pnp: PnP ACPI: disabled
[    4.229444] thermal_sys: Registered thermal governor 'step_wise'
[    4.229625] thermal_sys: Registered thermal governor 'power_allocator'
[    4.255997] NET: Registered protocol family 2
[    4.277866] tcp_listen_portaddr_hash hash table entries: 2048 (order: 3, 32768 bytes, linear)
[    4.283587] TCP established hash table entries: 32768 (order: 6, 262144 bytes, linear)
[    4.303643] TCP bind hash table entries: 32768 (order: 7, 524288 bytes, linear)
[    4.341523] TCP: Hash tables configured (established 32768 bind 32768)
[    4.347952] UDP hash table entries: 2048 (order: 4, 65536 bytes, linear)
[    4.356044] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes, linear)
[    4.370369] NET: Registered protocol family 1
[    4.384670] RPC: Registered named UNIX socket transport module.
[    4.385461] RPC: Registered udp transport module.
[    4.386007] RPC: Registered tcp transport module.
[    4.386549] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    4.387987] PCI: CLS 0 bytes, default 64
[    4.396103] Unpacking initramfs...
[   29.490265] Freeing initrd memory: 6880K
[   29.524054] hw perfevents: enabled with armv8_cortex_a53 PMU driver, 7 counters available
[   29.541697] hw perfevents: enabled with armv8_cortex_a72 PMU driver, 7 counters available
[   29.560107] kvm [1]: IPA Size Limit: 40bits
[   29.600467] kvm [1]: vgic-v2@fff20000
[   29.601958] kvm [1]: GIC system register CPU interface enabled
[   29.611617] kvm [1]: vgic interrupt IRQ10
[   29.620892] kvm [1]: Hyp mode initialized successfully
[   39.469371] Initialise system trusted keyrings
[   39.474427] workingset: timestamp_bits=44 max_order=20 bucket_order=0
[   39.849366] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[   39.888633] NFS: Registering the id_resolver key type
[   39.889950] Key type id_resolver registered
[   39.890535] Key type id_legacy registered
[   39.892110] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[   39.900595] 9p: Installing v9fs 9p2000 file system support
[   41.573801] Key type asymmetric registered
[   41.575526] Asymmetric key parser 'x509' registered
[   41.577709] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 245)
[   41.578507] io scheduler mq-deadline registered
[   41.579708] io scheduler kyber registered
[   42.787183] EINJ: ACPI disabled.
[   43.254206] dma-pl330 ff6d0000.dma-controller: Loaded driver for PL330 DMAC-241330
[   43.256041] dma-pl330 ff6d0000.dma-controller: 	DBUFF-32x8bytes Num_Chans-6 Num_Peri-12 Num_Events-12
[   43.317737] dma-pl330 ff6e0000.dma-controller: Loaded driver for PL330 DMAC-241330
[   43.319508] dma-pl330 ff6e0000.dma-controller: 	DBUFF-128x8bytes Num_Chans-8 Num_Peri-20 Num_Events-16
[   43.657523] pwm-regulator: supplied by regulator-dummy
[   43.952741] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[   44.064215] ff180000.serial: ttyS0 at MMIO 0xff180000 (irq = 35, base_baud = 1500000) is a 16550A
[   44.072343] serial serial0: tty port ttyS0 registered
[   44.097716] ff1a0000.serial: ttyS2 at MMIO 0xff1a0000 (irq = 36, base_baud = 1500000) is a 16550A
[   44.392814] printk: console [ttyS2] enabled
[   44.487892] SuperH (H)SCI(F) driver initialized
[   44.541030] msm_serial: driver initialized
[   44.635912] cacheinfo: Unable to detect cache hierarchy for CPU 0
[   45.029448] loop: module loaded
[   45.414086] libphy: Fixed MDIO Bus: probed
[   45.431734] tun: Universal TUN/TAP device driver, 1.6
[   45.496565] thunder_xcv, ver 1.0
[   45.500294] thunder_bgx, ver 1.0
[   45.504016] nicpf, ver 1.0
[   45.561448] hclge is initializing
[   45.563299] hns3: Hisilicon Ethernet Network Driver for Hip08 Family - version
[   45.565324] hns3: Copyright (c) 2017 Huawei Corporation.
[   45.569346] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
[   45.571501] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[   45.575759] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.6.0-k
[   45.577637] igb: Copyright (c) 2007-2014 Intel Corporation.
[   45.581272] igbvf: Intel(R) Gigabit Virtual Function Network Driver - version 2.4.0-k
[   45.583873] igbvf: Copyright (c) 2009 - 2012 Intel Corporation.
[   45.616604] sky2: driver version 1.30
[   45.677994] VFIO - User Level meta-driver version: 0.3
[   45.804024] OF: graph: no port node found in /syscon@ff770000/usb2-phy@e450/otg-port
[   45.999248] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[   46.001289] ehci-pci: EHCI PCI platform driver
[   46.004733] ehci-platform: EHCI generic platform driver
[   46.019924] ehci-platform fe380000.usb: EHCI Host Controller
[   46.022503] ehci-platform fe380000.usb: new USB bus registered, assigned bus number 1
[   46.030168] ehci-platform fe380000.usb: irq 28, io mem 0xfe380000
[   46.048315] ehci-platform fe380000.usb: USB 2.0 started, EHCI 1.00
[   46.083590] hub 1-0:1.0: USB hub found
[   46.087976] hub 1-0:1.0: 1 port detected
[   46.120050] ehci-platform fe3c0000.usb: EHCI Host Controller
[   46.122576] ehci-platform fe3c0000.usb: new USB bus registered, assigned bus number 2
[   46.129786] ehci-platform fe3c0000.usb: irq 30, io mem 0xfe3c0000
[   46.148247] ehci-platform fe3c0000.usb: USB 2.0 started, EHCI 1.00
[   46.184630] hub 2-0:1.0: USB hub found
[   46.188104] hub 2-0:1.0: 1 port detected
[   46.219423] ehci-orion: EHCI orion driver
[   46.232327] ehci-exynos: EHCI EXYNOS driver
[   46.243284] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[   46.245537] ohci-pci: OHCI PCI platform driver
[   46.249499] ohci-platform: OHCI generic platform driver
[   46.261059] ohci-platform fe3a0000.usb: Generic Platform OHCI controller
[   46.264347] ohci-platform fe3a0000.usb: new USB bus registered, assigned bus number 3
[   46.270542] ohci-platform fe3a0000.usb: irq 29, io mem 0xfe3a0000
[   46.372638] hub 3-0:1.0: USB hub found
[   46.376086] hub 3-0:1.0: 1 port detected
[   46.404010] ohci-platform fe3e0000.usb: Generic Platform OHCI controller
[   46.407331] ohci-platform fe3e0000.usb: new USB bus registered, assigned bus number 4
[   46.413693] ohci-platform fe3e0000.usb: irq 31, io mem 0xfe3e0000
[   46.512671] hub 4-0:1.0: USB hub found
[   46.516154] hub 4-0:1.0: 1 port detected
[   46.545434] ohci-exynos: OHCI EXYNOS driver
[   46.584921] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
[   46.588205] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 5
[   46.596011] xhci-hcd xhci-hcd.0.auto: hcc params 0x0220fe64 hci version 0x110 quirks 0x0000000002010010
[   46.599697] xhci-hcd xhci-hcd.0.auto: irq 224, io mem 0xfe800000
[   46.644699] hub 5-0:1.0: USB hub found
[   46.647612] hub 5-0:1.0: 1 port detected
[   46.665762] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
[   46.668638] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 6
[   46.671752] xhci-hcd xhci-hcd.0.auto: Host supports USB 3.0 SuperSpeed
[   46.677794] usb usb6: We don't know the algorithms for LPM for this host, disabling LPM.
[   46.714035] hub 6-0:1.0: USB hub found
[   46.718216] hub 6-0:1.0: 1 port detected
[   46.743807] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
[   46.746468] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 7
[   46.754545] xhci-hcd xhci-hcd.1.auto: hcc params 0x0220fe64 hci version 0x110 quirks 0x0000000002010010
[   46.760172] xhci-hcd xhci-hcd.1.auto: irq 225, io mem 0xfe900000
[   46.804163] hub 7-0:1.0: USB hub found
[   46.807598] hub 7-0:1.0: 1 port detected
[   46.828026] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
[   46.830238] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 8
[   46.833333] xhci-hcd xhci-hcd.1.auto: Host supports USB 3.0 SuperSpeed
[   46.840975] usb usb8: We don't know the algorithms for LPM for this host, disabling LPM.
[   46.877579] hub 8-0:1.0: USB hub found
[   46.881420] hub 8-0:1.0: 1 port detected
[   46.918888] usb 4-1: new full-speed USB device number 2 using ohci-platform
[   46.923238] usbcore: registered new interface driver usb-storage
[   47.180025] i2c /dev entries driver
[   47.351456] rk808 0-001b: chip id: 0x0
[   47.457555] rk808-regulator rk808-regulator: there is no dvs0 gpio
[   47.461097] rk808-regulator rk808-regulator: there is no dvs1 gpio
[   47.465805] DCDC_REG1: supplied by vcc5v0_sys
[   47.488760] DCDC_REG2: supplied by vcc5v0_sys
[   47.507259] DCDC_REG3: supplied by vcc5v0_sys
[   47.519934] DCDC_REG4: supplied by vcc5v0_sys
[   47.536630] LDO_REG1: supplied by vcc5v0_sys
[   47.556873] LDO_REG2: supplied by vcc5v0_sys
[   47.575568] LDO_REG3: supplied by vcc5v0_sys
[   47.595554] LDO_REG4: supplied by vcc5v0_sys
[   47.615492] LDO_REG5: supplied by vcc5v0_sys
[   47.634011] LDO_REG6: supplied by vcc5v0_sys
[   47.656420] LDO_REG7: supplied by vcc5v0_sys
[   47.676310] LDO_REG8: supplied by vcc5v0_sys
[   47.697818] SWITCH_REG1: supplied by vcc3v3_sys
[   47.713620] SWITCH_REG2: supplied by vcc3v3_sys
[   47.765146] fan53555-regulator 0-0040: FAN53555 Option[8] Rev[1] Detected!
[   47.768906] fan53555-reg: supplied by vcc5v0_sys
[   47.813231] fan53555-regulator 0-0041: FAN53555 Option[8] Rev[1] Detected!
[   47.816506] fan53555-reg: supplied by vcc5v0_sys
[   48.326337] cpufreq: cpufreq_online: CPU0: Running at unlisted freq: 400000 KHz
[   48.334581] cpufreq: cpufreq_online: CPU0: Unlisted initial frequency changed to: 408000 KHz
[   48.348055] random: fast init done
[   48.407842] cpufreq: cpufreq_online: CPU4: Running at unlisted freq: 12000 KHz
[   48.423957] cpufreq: cpufreq_online: CPU4: Unlisted initial frequency changed to: 408000 KHz
[   48.427169] sdhci: Secure Digital Host Controller Interface driver
[   48.427714] sdhci: Copyright(c) Pierre Ossman
[   48.428345] Synopsys Designware Multimedia Card Interface Driver
[   48.429406] dwmmc_rockchip fe310000.dwmmc: IDMAC supports 32-bit address mode.
[   48.430052] dwmmc_rockchip fe310000.dwmmc: Using internal DMA controller.
[   48.430665] dwmmc_rockchip fe310000.dwmmc: Version ID is 270a
[   48.431191] dwmmc_rockchip fe310000.dwmmc: DW MMC controller at irq 25,32 bit host data width,256 deep fifo
[   48.432104] dwmmc_rockchip fe310000.dwmmc: allocated mmc-pwrseq
[   48.432623] mmc_host mmc0: card is non-removable.
[   48.446130] mmc_host mmc0: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0)
[   48.459846] dwmmc_rockchip fe320000.dwmmc: IDMAC supports 32-bit address mode.
[   48.460488] dwmmc_rockchip fe320000.dwmmc: Using internal DMA controller.
[   48.461090] dwmmc_rockchip fe320000.dwmmc: Version ID is 270a
[   48.461609] dwmmc_rockchip fe320000.dwmmc: DW MMC controller at irq 26,32 bit host data width,256 deep fifo
[   48.462523] dwmmc_rockchip fe320000.dwmmc: Got CD GPIO
[   48.474590] mmc_host mmc1: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0)
[   48.487140] sdhci-pltfm: SDHCI platform and OF driver helper
[   48.488225] mmc2: CQHCI version 5.10
[   48.498507] mmc0: queuing unknown CIS tuple 0x80 (2 bytes)
[   48.500730] mmc0: queuing unknown CIS tuple 0x80 (3 bytes)
[   48.503459] mmc0: queuing unknown CIS tuple 0x80 (3 bytes)
[   48.507378] mmc0: queuing unknown CIS tuple 0x80 (7 bytes)
[   48.512340] mmc0: queuing unknown CIS tuple 0x81 (9 bytes)
[   48.514116] mmc2: SDHCI controller on fe330000.sdhci [fe330000.sdhci] using ADMA
[   48.515935] ledtrig-cpu: registered to indicate activity on CPUs
[   48.521600] input: 2.4G Composite Devic as /devices/platform/fe3e0000.usb/usb4/4-1/4-1:1.0/0003:2318:2808.0001/input/input0
[   48.582791] hid-generic 0003:2318:2808.0001: input: USB HID v1.10 Keyboard [2.4G Composite Devic] on usb-fe3e0000.usb-1/input0
[   48.582917] mmc_host mmc0: Bus speed (slot 0) = 148500000Hz (slot req 150000000Hz, actual 148500000HZ div = 0)
[   48.588158] input: 2.4G Composite Devic Mouse as /devices/platform/fe3e0000.usb/usb4/4-1/4-1:1.1/0003:2318:2808.0002/input/input1
[   48.589375] input: 2.4G Composite Devic Consumer Control as /devices/platform/fe3e0000.usb/usb4/4-1/4-1:1.1/0003:2318:2808.0002/input/input2
[   48.617313] mmc2: Command Queue Engine enabled
[   48.617719] mmc2: new HS400 Enhanced strobe MMC card at address 0001
[   48.619079] mmcblk2: mmc2:0001 D9D16G 14.5 GiB
[   48.619725] mmcblk2boot0: mmc2:0001 D9D16G partition 1 4.00 MiB
[   48.620545] mmcblk2boot1: mmc2:0001 D9D16G partition 2 4.00 MiB
[   48.621175] mmcblk2rpmb: mmc2:0001 D9D16G partition 3 4.00 MiB, chardev (237:0)
[   48.627284]  mmcblk2: p1
[   48.650808] input: 2.4G Composite Devic System Control as /devices/platform/fe3e0000.usb/usb4/4-1/4-1:1.1/0003:2318:2808.0002/input/input3
[   48.651942] hid-generic 0003:2318:2808.0002: input: USB HID v1.10 Mouse [2.4G Composite Devic] on usb-fe3e0000.usb-1/input1
[   48.652972] usbcore: registered new interface driver usbhid
[   48.653459] usbhid: USB HID core driver
[   48.656236] NET: Registered protocol family 17
[   48.656717] 9pnet: Installing 9P2000 support
[   48.657116] Key type dns_resolver registered
[   48.657812] registered taskstats version 1
[   48.658172] Loading compiled-in X.509 certificates
[   48.670082] hctosys: unable to open rtc device (rtc0)
[   48.671241] ALSA device list:
[   48.671510]   No soundcards found.
[   48.672079] ttyS2 - failed to request DMA
[   48.675245] Freeing unused kernel memory: 5312K
[   48.690669] Run /init as init process
Loading, please wait...
Starting version 241
[   48.879280] dwmmc_rockchip fe310000.dwmmc: Successfully tuned phase to 218
[   48.882340] mmc0: new ultra high speed SDR104 SDIO card at address 0001
[   48.889160] rk_gmac-dwmac fe300000.ethernet: PTP uses main clock
[   48.889744] rk_gmac-dwmac fe300000.ethernet: clock input or output? (input).
[   48.890362] rk_gmac-dwmac fe300000.ethernet: TX delay(0x28).
[   48.890884] rk_gmac-dwmac fe300000.ethernet: RX delay(0x11).
[   48.891382] rk_gmac-dwmac fe300000.ethernet: integrated PHY? (no).
[   48.891942] rk_gmac-dwmac fe300000.ethernet: cannot get clock clk_mac_speed
[   48.892549] rk_gmac-dwmac fe300000.ethernet: clock input from PHY
[   48.898086] rk_gmac-dwmac fe300000.ethernet: init for RGMII
[   48.899844] rk_gmac-dwmac fe300000.ethernet: User ID: 0x10, Synopsys ID: 0x35
[   48.900495] rk_gmac-dwmac fe300000.ethernet: 	DWMAC1000
[   48.900967] rk_gmac-dwmac fe300000.ethernet: DMA HW capability register supported
[   48.901632] rk_gmac-dwmac fe300000.ethernet: RX Checksum Offload Engine supported
[   48.902295] rk_gmac-dwmac fe300000.ethernet: COE Type 2
[   48.902799] rk_gmac-dwmac fe300000.ethernet: TX Checksum insertion supported
[   48.903430] rk_gmac-dwmac fe300000.ethernet: Wake-Up On Lan supported
[   48.904034] rk_gmac-dwmac fe300000.ethernet: Normal descriptors
[   48.904566] rk_gmac-dwmac fe300000.ethernet: Ring mode enabled
[   48.905086] rk_gmac-dwmac fe300000.ethernet: Enable RX Mitigation via HW Watchdog Timer
[   48.925796] rk808-rtc rk808-rtc: registered as rtc0
[   48.998890] libphy: stmmac: probed
[   48.999206] RTL8211E Gigabit Ethernet stmmac-0:00: attached PHY driver [RTL8211E Gigabit Ethernet] (mii_bus:phy_addr=stmmac-0:00, irq=POLL)
[   49.000297] RTL8211E Gigabit Ethernet stmmac-0:01: attached PHY driver [RTL8211E Gigabit Ethernet] (mii_bus:phy_addr=stmmac-0:01, irq=POLL)
Begin: Loading essential drivers ... done.
Begin: Running /scripts/init-premount ... done.
Begin: Mounting root file system ... Begin: Running /scripts/local-top ... done.
Begin: Running /scripts/local-premount ... done.
Warning: fsck not present, so skipping root file system
[   49.233816] EXT4-fs (mmcblk2p1): recovery complete
[   49.234369] EXT4-fs (mmcblk2p1): mounted filesystem with ordered data mode. Opts: (null)
done.
Begin: Running /scripts/local-bottom ... done.
Begin: Running /scripts/init-bottom ... done.
[   49.396345] systemd[1]: System time before build time, advancing clock.
[   49.418641] NET: Registered protocol family 10
[   49.419428] Segment Routing with IPv6
[   49.435808] systemd[1]: systemd 241 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN +PCRE2 default-hierarchy=hybrid)
[   49.437986] systemd[1]: Detected architecture arm64.

Welcome to Debian GNU/Linux bullseye/sid!

[   49.451144] systemd[1]: Set hostname to <debian>.
[   49.452572] systemd[1]: Failed to bump fs.file-max, ignoring: Invalid argument
[   49.542056] systemd[1]: File /lib/systemd/system/systemd-journald.service:12 configures an IP firewall (IPAddressDeny=any), but the local system does not support BPF/cgroup based firewalling.
[   49.543647] systemd[1]: Proceeding WITHOUT firewalling in effect! (This warning is only shown for the first loaded unit using IP firewalling.)
[   49.605336] systemd[1]: Configuration file /lib/systemd/system/weston.service is marked world-writable. Please remove world writability permission bits. Proceeding anyway.
[   49.632763] random: systemd: uninitialized urandom read (16 bytes read)
[   49.636241] systemd[1]: Condition check resulted in Arbitrary Executable File Formats File System Automount Point being skipped.
[   49.637284] random: systemd: uninitialized urandom read (16 bytes read)
[   49.637885] systemd[1]: Reached target Remote File Systems.
[  OK  ] Reached target Remote File Systems.
[   49.639433] random: systemd: uninitialized urandom read (16 bytes read)
[   49.640113] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[  OK  ] Started Forward Password R…uests to Wall Directory Watch.
[  OK  ] Reached target User and Group Name Lookups.
[  OK  ] Created slice system-getty.slice.
[  OK  ] Listening on udev Control Socket.
[  OK  ] Listening on Journal Audit Socket.
[  OK  ] Listening on udev Kernel Socket.
[  OK  ] Created slice User and Session Slice.
[  OK  ] Reached target Slices.
[  OK  ] Listening on initctl Compatibility Named Pipe.
[  OK  ] Started Dispatch Password …ts to Console Directory Watch.
[  OK  ] Reached target Paths.
[  OK  ] Reached target Local Encrypted Volumes.
[  OK  ] Listening on Journal Socket.
         Starting Create list of re…odes for the current kernel...
         Mounting POSIX Message Queue File System...
         Starting udev Coldplug all Devices...
         Mounting Kernel Debug File System...
         Starting Remount Root and Kernel File Systems...
[  OK  ] Created slice system-serial\x2dgetty.slice.
[   49.829528] EXT4-fs (mmcblk2p1): re-mounted. Opts: (null)
[  OK  ] Listening on Journal Socket (/dev/log).
         Starting Journal Service...
         Starting Load Kernel Modules...
         Mounting Huge Pages File System...
[  OK  ] Reached target Swap.
[  OK  ] Reached target System Time Synchronized.
[  OK  ] Started Create list of req… nodes for the current kernel.
[  OK  ] Mounted POSIX Message Queue File System.
[  OK  ] Mounted Kernel Debug File System.
[  OK  ] Started Remount Root and Kernel File Systems.
[  OK  ] Started Load Kernel Modules.
[  OK  ] Mounted Huge Pages File System.
         Starting Apply Kernel Variables...
         Mounting Kernel Configuration File System...
         Starting Load/Save Random Seed...
         Starting Create System Users...
[  OK  ] Started udev Coldplug all Devices.
[  OK  ] Started Apply Kernel Variables.
[  OK  ] Mounted Kernel Configuration File System.
[  OK  ] Started Load/Save Random Seed.
[  OK  ] Started Create System Users.
         Starting Create Static Device Nodes in /dev...
[  OK  ] Started Journal Service.
[  OK  ] Started Create Static Device Nodes in /dev.
         Starting udev Kernel Device Manager...
[  OK  ] Reached target Local File Systems (Pre).
[  OK  ] Reached target Local File Systems.
         Starting Flush Journal to Persistent Storage...
[   50.210567] systemd-journald[292]: Received request to flush runtime journal from PID 1
[   50.214809] systemd-journald[292]: File /var/log/journal/e988230769624ea0b4582af7e4ba3219/system.journal corrupted or uncleanly shut down, renaming and replacing.
[  OK  ] Started udev Kernel Device Manager.
[  OK  ] Started Flush Journal to Persistent Storage.
[  OK  ] Found device /dev/ttyS2.
[   50.455608] cfg80211: Loading compiled-in X.509 certificates for regulatory database
         Starting Create Volatile Files and Directories...
[   50.485395] rockchip-vop ff8f0000.vop: Adding to iommu group 1
[   50.486404] rockchip-vop ff900000.vop: Adding to iommu group 2
[   50.493299] Bluetooth: Core ver 2.22
[   50.493697] NET: Registered protocol family 31
[   50.494094] Bluetooth: HCI device and connection manager initialized
[   50.494701] Bluetooth: HCI socket layer initialized
[   50.495134] Bluetooth: L2CAP socket layer initialized
[   50.495584] Bluetooth: SCO socket layer initialized
[   50.501710] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[   50.502375] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
[   50.503168] cfg80211: failed to load regulatory.db
[  OK  ] Started Create Volatile Files and Directories.
[   50.509248] rockchip-drm display-subsystem: bound ff8f0000.vop (ops vop_component_ops [rockchipdrm])
[   50.514068] rockchip-drm display-subsystem: bound ff900000.vop (ops vop_component_ops [rockchipdrm])
[   50.514272] panfrost ff9a0000.gpu: clock rate = 500000000
[   50.515184] dwhdmi-rockchip ff940000.hdmi: Detected HDMI TX controller v2.11a with HDCP (DWC HDMI 2.0 TX PHY)
[   50.518904] panfrost ff9a0000.gpu: mali-t860 id 0x860 major 0x2 minor 0x0 status 0x0
[   50.519611] panfrost ff9a0000.gpu: features: 00000000,100e77bf, issues: 00000000,24040400
[   50.520339] panfrost ff9a0000.gpu: Features: L2:0x07120206 Shader:0x00000000 Tiler:0x00000809 Mem:0x1 MMU:0x00002830 AS:0xff JS:0x7
[   50.521378] panfrost ff9a0000.gpu: shader_present=0xf l2_present=0x1
[   50.524597] rockchip-drm display-subsystem: bound ff940000.hdmi (ops dw_hdmi_rockchip_ops [rockchipdrm])
[   50.525462] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[   50.525830] Bluetooth: HCI UART driver ver 2.3
[   50.526053] [drm] No driver support for vblank timestamp query.
[   50.526454] Bluetooth: HCI UART protocol H4 registered
[   50.527530] Bluetooth: HCI UART protocol LL registered
[   50.528635] [drm] Initialized panfrost 1.0.0 20180908 for ff9a0000.gpu on minor 1
[   50.528781] hci_uart_bcm serial0-0: serial0-0 supply vbat not found, using dummy regulator
[   50.530124] hci_uart_bcm serial0-0: serial0-0 supply vddio not found, using dummy regulator
[   50.530794] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43456-sdio for chip BCM4345/9
[   50.531060] Bluetooth: HCI UART protocol Broadcom registered
[   50.531819] brcmfmac mmc0:0001:1: Direct firmware load for brcm/brcmfmac43456-sdio.bin failed with error -2
[   50.550695] ttyS0 - failed to request DMA
[   50.596170] Console: switching to colour frame buffer device 240x67
[   50.635371] rockchip-drm display-subsystem: fb0: rockchipdrmfb frame buffer device
         Starting Update UTMP about System Boot/Shutdown...
[   50.663087] [drm] Initialized rockchip 1.0.0 20140818 for display-subsystem on minor 0
[   50.676722] asoc-simple-card hdmi-sound: i2s-hifi <-> ff8a0000.i2s mapping ok
[   50.677539] asoc-simple-card hdmi-sound: ASoC: no DMI vendor name!
[  OK  ] Started Update UTMP about System Boot/Shutdown.
[   50.719460] Bluetooth: hci0: BCM: chip id 130
[   50.722272] Bluetooth: hci0: BCM: features 0x0f
[   50.746075] Bluetooth: hci0: BCM4345C5
[   50.746449] Bluetooth: hci0: BCM (003.006.006) build 0000
[   50.747007] bluetooth hci0: Direct firmware load for brcm/BCM.hcd failed with error -2
[   50.747748] Bluetooth: hci0: BCM: Patch brcm/BCM.hcd not found
[  OK  ] Reached target Sound Card.
[  OK  ] Listening on Load/Save RF …itch Status /dev/rfkill Watch.
[  OK  ] Reached target System Initialization.
[  OK  ] Started Periodic ext4 Onli…ata Check for All Filesystems.
[  OK  ] Listening on D-Bus System Message Bus Socket.
[  OK  ] Started Daily Cleanup of Temporary Directories.
[  OK  ] Listening on Avahi mDNS/DNS-SD Stack Activation Socket.
[  OK  ] Reached target Sockets.
[  OK  ] Reached target Basic System.
         Starting Disk Manager...
         Starting Login Service...
         Starting Accounts Service...
         Starting Avahi mDNS/DNS-SD Stack...
[  OK  ] Started Daily man-db regeneration.
         Starting Bluetooth service...
[  OK  ] Started Daily apt download activities.
[  OK  ] Started Daily apt upgrade and clean activities.
[  OK  ] Reached target Timers.
[  OK  ] Started D-Bus System Message Bus.
         Starting Network Manager...
         Starting WPA supplicant...
         Starting Remove Stale Onli…t4 Metadata Check Snapshots...
         Starting Load/Save RF Kill Switch Status...
[  OK  ] Started Load/Save RF Kill Switch Status.
[  OK  ] Started Bluetooth service.
[  OK  ] Started Avahi mDNS/DNS-SD Stack.
[  OK  ] Started WPA supplicant.
[  OK  ] Reached target Bluetooth.
         Starting Hostname Service...
         Starting Authorization Manager...
[  OK  ] Started Login Service.
[  OK  ] Started Authorization Manager.
[  OK  ] Started Accounts Service.
[  OK  ] Started Network Manager.
[  OK  ] Reached target Network.
         Starting Permit User Sessions...
         Starting Network Time Service...
         Starting OpenBSD Secure Shell server...
[  OK  ] Started Permit User Sessions.
         Starting GNOME Display Manager...
[  OK  ] Started Serial Getty on ttyS2.
[  OK  ] Reached target Login Prompts.
         Starting Weston, a Wayland…ositor, as a system service...
[  OK  ] Started Network Time Service.
[  OK  ] Started Disk Manager.
[  OK  ] Started GNOME Display Manager.
[  OK  ] Created slice User Slice of UID 1000.
         Starting User Runtime Directory /run/user/1000...
[  OK  ] Started User Runtime Directory /run/user/1000.
[  OK  ] Started Hostname Service.
         Starting Network Manager Script Dispatcher Service...
         Starting User Manager for UID 1000...
[  OK  ] Started Network Manager Script Dispatcher Service.
[   51.530741] rk_gmac-dwmac fe300000.ethernet eth0: PHY [stmmac-0:00] driver [RTL8211E Gigabit Ethernet]
[   51.538742] brcmfmac: brcmf_sdio_htclk: HT Avail timeout (1000000): clkctl 0x50
[   51.542527] rk_gmac-dwmac fe300000.ethernet eth0: No Safety Features support found
[   51.543246] rk_gmac-dwmac fe300000.ethernet eth0: PTP not supported by HW
[   51.543875] rk_gmac-dwmac fe300000.ethernet eth0: configuring for phy/rgmii link mode
[  OK  ] Created slice User Slice of UID 111.
         Starting User Runtime Directory /run/user/111...
[  OK  ] Started User Manager for UID 1000.
[  OK  ] Started Session 1 of user debian.
[  OK  ] Started User Runtime Directory /run/user/111.
         Starting User Manager for UID 111...
[  OK  ] Started User Manager for UID 111.
[  OK  ] Started Session c1 of user Debian-gdm.
[FAILED] Failed to start Weston, a …mpositor, as a system service.
See 'systemctl status weston.service' for details.
[   52.626680] phy phy-ff770000.syscon:usb2-phy@e450.2: charger = USB_DCP_CHARGER
[  OK  ] Started Remove Stale Onlin…ext4 Metadata Check Snapshots.
[  OK  ] Started Session c2 of user Debian-gdm.
[   55.639024] rk_gmac-dwmac fe300000.ethernet eth0: Link is Up - 1Gbps/Full - flow control rx/tx
[   55.639794] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready

Debian GNU/Linux bullseye/sid debian ttyS2

debian login: [   61.782741] rk_gmac-dwmac fe300000.ethernet eth0: Link is Down

debian login: debian
Password:

Login incorrect
debian login: debian
Password: [   77.058160] random: crng init done
[   77.058481] random: 7 urandom warning(s) missed due to ratelimiting
[   77.142563] rk_gmac-dwmac fe300000.ethernet eth0: Link is Up - 100Mbps/Full - flow control rx/tx

Last login: Thu Feb 14 10:11:59 UTC 2019 on tty7
Linux debian 5.3.0-rc1-g2ca7ec1e8750 #1 SMP Wed Jul 24 12:55:50 UTC 2019 aarch64

The programs included with the Debian GNU/Linux system are free software;
the exact distribution terms for each program are described in the
individual files in /usr/share/doc/*/copyright.

Debian GNU/Linux comes with ABSOLUTELY NO WARRANTY, to the extent
permitted by applicable law.
debian@debian:~$
debian@debian:~$
debian@debian:~$
debian@debian:~$
debian@debian:~$ uname -r
5.3.0-rc1-g2ca7ec1e8750
debian@debian:~$ cat pro/proc/cmdline
root=UUID=25b740b5-c924-4df2-bb9a-341bf9e1bd5f rw rootwait
debian@debian:~$ cat /proc/cmdline puinfo
processor	: 0
BogoMIPS	: 48.00
Features	: fp asimd evtstrm aes pmull sha1 sha2 crc32 cpuid
CPU implementer	: 0x41
CPU architecture: 8
CPU variant	: 0x0
CPU part	: 0xd03
CPU revision	: 4

processor	: 1
BogoMIPS	: 48.00
Features	: fp asimd evtstrm aes pmull sha1 sha2 crc32 cpuid
CPU implementer	: 0x41
CPU architecture: 8
CPU variant	: 0x0
CPU part	: 0xd03
CPU revision	: 4

processor	: 2
BogoMIPS	: 48.00
Features	: fp asimd evtstrm aes pmull sha1 sha2 crc32 cpuid
CPU implementer	: 0x41
CPU architecture: 8
CPU variant	: 0x0
CPU part	: 0xd03
CPU revision	: 4

processor	: 3
BogoMIPS	: 48.00
Features	: fp asimd evtstrm aes pmull sha1 sha2 crc32 cpuid
CPU implementer	: 0x41
CPU architecture: 8
CPU variant	: 0x0
CPU part	: 0xd03
CPU revision	: 4

processor	: 4
BogoMIPS	: 48.00
Features	: fp asimd evtstrm aes pmull sha1 sha2 crc32 cpuid
CPU implementer	: 0x41
CPU architecture: 8
CPU variant	: 0x0
CPU part	: 0xd08
CPU revision	: 2

processor	: 5
BogoMIPS	: 48.00
Features	: fp asimd evtstrm aes pmull sha1 sha2 crc32 cpuid
CPU implementer	: 0x41
CPU architecture: 8
CPU variant	: 0x0
CPU part	: 0xd08
CPU revision	: 2

debian@debian:~$