Advertisement
Bullet64

JMS585 with one HDD

Apr 15th, 2020
106
Never
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
  1. U-Boot TPL 2020.01-ayufan-2011-g26eed9fd (Apr 09 2020 - 21:56:16)
  2. Channel 0: LPDDR4, 50MHz
  3. BW=32 Col=10 Bk=8 CS0 Row=15 CS=1 Die BW=16 Size=1024MB
  4. Channel 1: LPDDR4, 50MHz
  5. BW=32 Col=10 Bk=8 CS0 Row=15 CS=1 Die BW=16 Size=1024MB
  6. 256B stride
  7. 256B stride
  8. lpddr4_set_rate: change freq to 400000000 mhz 0, 1
  9. lpddr4_set_rate: change freq to 800000000 mhz 1, 0
  10. Trying to boot from BOOTROM
  11. Returning to boot ROM...
  12.  
  13. U-Boot SPL 2020.01-ayufan-2011-g26eed9fd (Apr 09 2020 - 21:56:16 +0000)
  14. Trying to boot from SPI
  15.  
  16.  
  17. U-Boot 2020.01-ayufan-2011-g26eed9fd (Apr 09 2020 - 21:56:23 +0000)
  18.  
  19. Model: Pine64 RockPro64
  20. DRAM: 2 GiB
  21. PMIC: RK808
  22. MMC: dwmmc@fe320000: 1, sdhci@fe330000: 0
  23. Loading Environment from MMC... Card did not respond to voltage select!
  24. *** Warning - No block device, using default environment
  25.  
  26. In: serial
  27. Out: vidconsole
  28. Err: vidconsole
  29. Model: Pine64 RockPro64
  30. rockchip_dnl_key_pressed: adc_channel_single_shot fail!
  31. Net: eth0: ethernet@fe300000
  32. Hit any key to stop autoboot: 0
  33. Card did not respond to voltage select!
  34. Card did not respond to voltage select!
  35.  
  36. Device 0: unknown device
  37. scanning bus for devices...
  38. SATA link 0 timeout.
  39. SATA link 1 timeout.
  40. SATA link 2 timeout.
  41. SATA link 3 timeout.
  42. Target spinup took 0 ms.
  43. AHCI 0001.0301 32 slots 5 ports 6 Gbps 0x1f impl SATA mode
  44. flags: 64bit ncq stag pm led clo pmp fbss pio slum part ccc apst boh
  45. Device 0: (4:0) Vendor: ATA Prod.: ST2000LM015-2E81 Rev: SDM1
  46. Type: Hard Disk
  47. Capacity: 1907729.0 MB = 1863.0 GB (3907029168 x 512)
  48.  
  49. Device 0: (4:0) Vendor: ATA Prod.: ST2000LM015-2E81 Rev: SDM1
  50. Type: Hard Disk
  51. Capacity: 1907729.0 MB = 1863.0 GB (3907029168 x 512)
  52. ... is now current device
  53. Scanning scsi 0:3...
  54. Found /extlinux/extlinux.conf
  55. Retrieving file: /extlinux/extlinux.conf
  56. 937 bytes read in 18 ms (50.8 KiB/s)
  57. select kernel
  58. 1: kernel-5.6.0-1134-ayufan-g652fb97d87eb
  59. 2: kernel-5.6.0-1134-ayufan-g652fb97d87eb-memtest
  60. Enter choice: 1: kernel-5.6.0-1134-ayufan-g652fb97d87eb
  61. Retrieving file: /initrd.img-5.6.0-1134-ayufan-g652fb97d87eb
  62. 13258588 bytes read in 241 ms (52.5 MiB/s)
  63. Retrieving file: /vmlinuz-5.6.0-1134-ayufan-g652fb97d87eb
  64. 22915584 bytes read in 397 ms (55 MiB/s)
  65. append: rw panic=10 init=/sbin/init coherent_pool=1M ethaddr=62:03:b0:d6:dc:b3 4
  66. Retrieving file: /dtbs/5.6.0-1134-ayufan-g652fb97d87eb/rockchip/rk3399-rockpro6b
  67. 56691 bytes read in 16 ms (3.4 MiB/s)
  68. ## Flattened Device Tree blob at 01f00000
  69. Booting using the fdt blob at 0x1f00000
  70. Loading Ramdisk to 79262000, end 79f06f5c ... OK
  71. Loading Device Tree to 0000000079251000, end 0000000079261d72 ... OK
  72.  
  73. Starting kernel ...
  74.  
  75. [ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd034]
  76. [ 0.000000] Linux version 5.6.0-1134-ayufan-g652fb97d87eb (root@runner-f725f0
  77. [ 0.000000] Machine model: Pine64 RockPro64 v2.1
  78. [ 0.000000] efi: Getting EFI parameters from FDT:
  79. [ 0.000000] efi: UEFI not found.
  80. [ 0.000000] cma: Reserved 64 MiB at 0x000000007c000000
  81. [ 0.000000] psci: probing for conduit method from DT.
  82. [ 0.000000] psci: PSCIv1.1 detected in firmware.
  83. [ 0.000000] psci: Using standard PSCI v0.2 function IDs
  84. [ 0.000000] psci: MIGRATE_INFO_TYPE not supported.
  85. [ 0.000000] psci: SMC Calling Convention v1.0
  86. [ 0.000000] percpu: Embedded 34 pages/cpu s101272 r8192 d29800 u139264
  87. [ 0.000000] Detected VIPT I-cache on CPU0
  88. [ 0.000000] CPU features: detected: ARM erratum 845719
  89. [ 0.000000] CPU features: detected: GIC system register CPU interface
  90. [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 515592
  91. [ 0.000000] Kernel command line: rw panic=10 init=/sbin/init coherent_pool=14
  92. [ 0.000000] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
  93. [ 0.000000] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes,)
  94. [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
  95. [ 0.000000] software IO TLB: mapped [mem 0x3bfff000-0x3ffff000] (64MB)
  96. [ 0.000000] Memory: 1878640K/2095104K available (14012K kernel code, 1130K r)
  97. [ 0.000000] random: get_random_u64 called from cache_random_seq_create+0x84/0
  98. [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1
  99. [ 0.000000] rcu: Hierarchical RCU implementation.
  100. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=6.
  101. [ 0.000000] Tasks RCU enabled.
  102. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 ji.
  103. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=6
  104. [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
  105. [ 0.000000] GICv3: GIC: Using split EOI/Deactivate mode
  106. [ 0.000000] GICv3: 256 SPIs implemented
  107. [ 0.000000] GICv3: 0 Extended SPIs implemented
  108. [ 0.000000] GICv3: Distributor has no Range Selector support
  109. [ 0.000000] GICv3: 16 PPIs implemented
  110. [ 0.000000] GICv3: no VLPI support, no direct LPI support, no RVPEID support
  111. [ 0.000000] GICv3: CPU0: found redistributor 0 region 0:0x00000000fef00000
  112. [ 0.000000] ITS [mem 0xfee20000-0xfee3ffff]
  113. [ 0.000000] ITS@0x00000000fee20000: allocated 65536 Devices @7b080000 (flat,)
  114. [ 0.000000] ITS: using cache flushing for cmd queue
  115. [ 0.000000] GICv3: using LPI property table @0x000000007b040000
  116. [ 0.000000] GIC: using cache flushing for LPI property table
  117. [ 0.000000] GICv3: CPU0: using allocated LPI pending table @0x000000007b05000
  118. [ 0.000000] GICv3: GIC: PPI partition interrupt-partition-0[0] { /cpus/cpu@0}
  119. [ 0.000000] GICv3: GIC: PPI partition interrupt-partition-1[1] { /cpus/cpu@1}
  120. [ 0.000000] arch_timer: cp15 timer(s) running at 24.00MHz (phys).
  121. [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycless
  122. [ 0.000006] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398s
  123. [ 0.001438] Console: colour dummy device 80x25
  124. [ 0.002041] printk: console [tty0] enabled
  125. [ 0.002098] Calibrating delay loop (skipped), value calculated using timer f)
  126. [ 0.002128] pid_max: default: 32768 minimum: 301
  127. [ 0.002386] LSM: Security Framework initializing
  128. [ 0.002420] Yama: becoming mindful.
  129. [ 0.002536] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes, lin)
  130. [ 0.002571] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes)
  131. [ 0.002667] *** VALIDATE tmpfs ***
  132. [ 0.003381] *** VALIDATE proc ***
  133. [ 0.003726] *** VALIDATE cgroup ***
  134. [ 0.003747] *** VALIDATE cgroup2 ***
  135. [ 0.005125] rcu: Hierarchical SRCU implementation.
  136. [ 0.007671] Platform MSI: interrupt-controller@fee20000 domain created
  137. [ 0.008114] PCI/MSI: /interrupt-controller@fee00000/interrupt-controller@feed
  138. [ 0.008860] EFI services will not be available.
  139. [ 0.009539] smp: Bringing up secondary CPUs ...
  140. [ 0.010301] Detected VIPT I-cache on CPU1
  141. [ 0.010342] GICv3: CPU1: found redistributor 1 region 0:0x00000000fef20000
  142. [ 0.010357] GICv3: CPU1: using allocated LPI pending table @0x000000007b06000
  143. [ 0.010409] CPU1: Booted secondary processor 0x0000000001 [0x410fd034]
  144. [ 0.011185] Detected VIPT I-cache on CPU2
  145. [ 0.011216] GICv3: CPU2: found redistributor 2 region 0:0x00000000fef40000
  146. [ 0.011229] GICv3: CPU2: using allocated LPI pending table @0x000000007b07000
  147. [ 0.011261] CPU2: Booted secondary processor 0x0000000002 [0x410fd034]
  148. [ 0.011945] Detected VIPT I-cache on CPU3
  149. [ 0.011973] GICv3: CPU3: found redistributor 3 region 0:0x00000000fef60000
  150. [ 0.011986] GICv3: CPU3: using allocated LPI pending table @0x000000007b10000
  151. [ 0.012015] CPU3: Booted secondary processor 0x0000000003 [0x410fd034]
  152. [ 0.012717] CPU features: detected: EL2 vector hardening
  153. [ 0.012728] ARM_SMCCC_ARCH_WORKAROUND_1 missing from firmware
  154. [ 0.012734] CPU features: detected: ARM erratum 1319367
  155. [ 0.012740] Detected PIPT I-cache on CPU4
  156. [ 0.012774] GICv3: CPU4: found redistributor 100 region 0:0x00000000fef80000
  157. [ 0.012787] GICv3: CPU4: using allocated LPI pending table @0x000000007b11000
  158. [ 0.012821] CPU4: Booted secondary processor 0x0000000100 [0x410fd082]
  159. [ 0.013559] Detected PIPT I-cache on CPU5
  160. [ 0.013585] GICv3: CPU5: found redistributor 101 region 0:0x00000000fefa0000
  161. [ 0.013597] GICv3: CPU5: using allocated LPI pending table @0x000000007b12000
  162. [ 0.013625] CPU5: Booted secondary processor 0x0000000101 [0x410fd082]
  163. [ 0.013736] smp: Brought up 1 node, 6 CPUs
  164. [ 0.014030] SMP: Total of 6 processors activated.
  165. [ 0.014047] CPU features: detected: 32-bit EL0 Support
  166. [ 0.014063] CPU features: detected: CRC32 instructions
  167. [ 0.048164] CPU: All CPU(s) started at EL2
  168. [ 0.048261] alternatives: patching kernel code
  169. [ 0.051167] devtmpfs: initialized
  170. [ 0.062815] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, ms
  171. [ 0.062862] futex hash table entries: 2048 (order: 5, 131072 bytes, linear)
  172. [ 0.064535] pinctrl core: initialized pinctrl subsystem
  173. [ 0.065286] thermal_sys: Registered thermal governor 'fair_share'
  174. [ 0.065289] thermal_sys: Registered thermal governor 'bang_bang'
  175. [ 0.065305] thermal_sys: Registered thermal governor 'step_wise'
  176. [ 0.065316] thermal_sys: Registered thermal governor 'user_space'
  177. [ 0.065328] thermal_sys: Registered thermal governor 'power_allocator'
  178. [ 0.065797] DMI not present or invalid.
  179. [ 0.066420] NET: Registered protocol family 16
  180. [ 0.068757] DMA: preallocated 1024 KiB pool for atomic allocations
  181. [ 0.070028] cpuidle: using governor ladder
  182. [ 0.070080] cpuidle: using governor menu
  183. [ 0.070519] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
  184. [ 0.070717] ASID allocator initialised with 65536 entries
  185. [ 0.070860] Serial: AMBA PL011 UART driver
  186. [ 0.107345] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
  187. [ 0.107369] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages
  188. [ 0.107384] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
  189. [ 0.107397] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages
  190. [ 1.551151] cryptd: max_cpu_qlen set to 1000
  191. [ 1.582473] ACPI: Interpreter disabled.
  192. [ 1.584067] vcc3v3_pcie: supplied by vcc12v_dcin
  193. [ 1.585724] vcc5v0_sys: supplied by vcc12v_dcin
  194. [ 1.586104] vcc5v0_usb: supplied by vcc12v_dcin
  195. [ 1.586325] vcc3v3_sys: supplied by vcc5v0_sys
  196. [ 1.587033] iommu: Default domain type: Translated
  197. [ 1.589487] vgaarb: loaded
  198. [ 1.590656] SCSI subsystem initialized
  199. [ 1.591264] usbcore: registered new interface driver usbfs
  200. [ 1.591337] usbcore: registered new interface driver hub
  201. [ 1.591463] usbcore: registered new device driver usb
  202. [ 1.592168] mc: Linux media interface: v0.10
  203. [ 1.592221] videodev: Linux video capture interface: v2.00
  204. [ 1.592323] pps_core: LinuxPPS API ver. 1 registered
  205. [ 1.592340] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giom>
  206. [ 1.592376] PTP clock support registered
  207. [ 1.592659] EDAC MC: Ver: 3.0.0
  208. [ 1.593654] Advanced Linux Sound Architecture Driver Initialized.
  209. [ 1.594345] NetLabel: Initializing
  210. [ 1.594362] NetLabel: domain hash size = 128
  211. [ 1.594376] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
  212. [ 1.594470] NetLabel: unlabeled traffic allowed by default
  213. [ 1.595316] clocksource: Switched to clocksource arch_sys_counter
  214. [ 1.595344] *** VALIDATE bpf ***
  215. [ 1.595661] VFS: Disk quotas dquot_6.6.0
  216. [ 1.595754] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
  217. [ 1.595859] *** VALIDATE ramfs ***
  218. [ 1.595893] *** VALIDATE hugetlbfs ***
  219. [ 1.596435] pnp: PnP ACPI: disabled
  220. [ 1.605807] NET: Registered protocol family 2
  221. [ 1.606697] tcp_listen_portaddr_hash hash table entries: 1024 (order: 2, 163)
  222. [ 1.606772] TCP established hash table entries: 16384 (order: 5, 131072 byte)
  223. [ 1.606999] TCP bind hash table entries: 16384 (order: 6, 262144 bytes, line)
  224. [ 1.607384] TCP: Hash tables configured (established 16384 bind 16384)
  225. [ 1.607535] UDP hash table entries: 1024 (order: 3, 32768 bytes, linear)
  226. [ 1.607629] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes, linear)
  227. [ 1.607948] NET: Registered protocol family 1
  228. [ 1.608628] RPC: Registered named UNIX socket transport module.
  229. [ 1.608648] RPC: Registered udp transport module.
  230. [ 1.608662] RPC: Registered tcp transport module.
  231. [ 1.608676] RPC: Registered tcp NFSv4.1 backchannel transport module.
  232. [ 1.608700] PCI: CLS 0 bytes, default 64
  233. [ 1.608932] Trying to unpack rootfs image as initramfs...
  234. [ 2.513650] Freeing initrd memory: 12944K
  235. [ 2.514850] hw perfevents: enabled with armv8_cortex_a53 PMU driver, 7 counte
  236. [ 2.515199] hw perfevents: enabled with armv8_cortex_a72 PMU driver, 7 counte
  237. [ 2.515778] kvm [1]: IPA Size Limit: 40bits
  238. [ 2.517337] kvm [1]: vgic-v2@fff20000
  239. [ 2.517376] kvm [1]: GIC system register CPU interface enabled
  240. [ 2.517577] kvm [1]: vgic interrupt IRQ10
  241. [ 2.517808] kvm [1]: Hyp mode initialized successfully
  242. [ 3.492164] debugfs: File ':interrupt-controller@fee00000' in directory 'dom!
  243. [ 3.492207] debugfs: File ':interrupt-controller@fee00000' in directory 'dom!
  244. [ 3.492233] debugfs: File ':interrupt-controller@fee00000' in directory 'dom!
  245. [ 3.492259] debugfs: File ':interrupt-controller@fee00000' in directory 'dom!
  246. [ 3.492283] debugfs: File ':interrupt-controller@fee00000' in directory 'dom!
  247. [ 3.492308] debugfs: File ':interrupt-controller@fee00000' in directory 'dom!
  248. [ 3.492333] debugfs: File ':interrupt-controller@fee00000' in directory 'dom!
  249. [ 3.492358] debugfs: File ':interrupt-controller@fee00000' in directory 'dom!
  250. [ 3.492383] debugfs: File ':interrupt-controller@fee00000' in directory 'dom!
  251. [ 3.492407] debugfs: File ':interrupt-controller@fee00000' in directory 'dom!
  252. [ 3.492432] debugfs: File ':interrupt-controller@fee00000' in directory 'dom!
  253. [ 3.492457] debugfs: File ':interrupt-controller@fee00000' in directory 'dom!
  254. [ 3.492482] debugfs: File ':interrupt-controller@fee00000' in directory 'dom!
  255. [ 3.492507] debugfs: File ':interrupt-controller@fee00000' in directory 'dom!
  256. [ 3.492531] debugfs: File ':interrupt-controller@fee00000' in directory 'dom!
  257. [ 3.495920] workingset: timestamp_bits=46 max_order=19 bucket_order=0
  258. [ 3.504858] zbud: loaded
  259. [ 3.507975] *** VALIDATE nfs ***
  260. [ 3.508076] *** VALIDATE nfs4 ***
  261. [ 3.508186] NFS: Registering the id_resolver key type
  262. [ 3.508225] Key type id_resolver registered
  263. [ 3.508240] Key type id_legacy registered
  264. [ 3.508264] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
  265. [ 3.508312] ntfs: driver 2.1.32 [Flags: R/W].
  266. [ 3.508801] fuse: init (API version 7.31)
  267. [ 3.508933] *** VALIDATE fuseblk ***
  268. [ 3.508955] *** VALIDATE fuse ***
  269. [ 3.509354] SGI XFS with ACLs, security attributes, quota, no debug enabled
  270. [ 3.511531] *** VALIDATE xfs ***
  271. [ 3.548811] NET: Registered protocol family 38
  272. [ 3.548850] Key type asymmetric registered
  273. [ 3.548866] Asymmetric key parser 'x509' registered
  274. [ 3.548946] Block layer SCSI generic (bsg) driver version 0.4 loaded (major )
  275. [ 3.549200] io scheduler mq-deadline registered
  276. [ 3.549219] io scheduler kyber registered
  277. [ 3.549463] io scheduler bfq registered
  278. [ 3.552762] vcc5v0_host: supplied by vcc5v0_usb
  279. [ 3.562579] rockchip-pcie f8000000.pcie: f8000000.pcie supply vpcie1v8 not fr
  280. [ 3.562681] rockchip-pcie f8000000.pcie: f8000000.pcie supply vpcie0v9 not fr
  281. [ 3.607569] rockchip-pcie f8000000.pcie: host bridge /pcie@f8000000 ranges:
  282. [ 3.607622] rockchip-pcie f8000000.pcie: MEM 0x00fa000000..0x00fbdfffff0
  283. [ 3.607659] rockchip-pcie f8000000.pcie: IO 0x00fbe00000..0x00fbefffff0
  284. [ 3.608006] rockchip-pcie f8000000.pcie: PCI host bridge to bus 0000:00
  285. [ 3.608035] pci_bus 0000:00: root bus resource [bus 00-1f]
  286. [ 3.608057] pci_bus 0000:00: root bus resource [mem 0xfa000000-0xfbdfffff]
  287. [ 3.608082] pci_bus 0000:00: root bus resource [io 0x0000-0xfffff] (bus add)
  288. [ 3.608145] pci 0000:00:00.0: [1d87:0100] type 01 class 0x060400
  289. [ 3.608288] pci 0000:00:00.0: supports D1
  290. [ 3.608308] pci 0000:00:00.0: PME# supported from D0 D1 D3hot
  291. [ 3.614668] pci 0000:00:00.0: bridge configuration invalid ([bus 00-00]), reg
  292. [ 3.614890] pci 0000:01:00.0: [197b:0585] type 00 class 0x010601
  293. [ 3.615031] pci 0000:01:00.0: reg 0x10: initial BAR value 0x00000000 invalid
  294. [ 3.615054] pci 0000:01:00.0: reg 0x10: [io size 0x0080]
  295. [ 3.615102] pci 0000:01:00.0: reg 0x14: initial BAR value 0x00000000 invalid
  296. [ 3.615124] pci 0000:01:00.0: reg 0x14: [io size 0x0080]
  297. [ 3.615170] pci 0000:01:00.0: reg 0x18: initial BAR value 0x00000000 invalid
  298. [ 3.615192] pci 0000:01:00.0: reg 0x18: [io size 0x0080]
  299. [ 3.615239] pci 0000:01:00.0: reg 0x1c: initial BAR value 0x00000000 invalid
  300. [ 3.615260] pci 0000:01:00.0: reg 0x1c: [io size 0x0080]
  301. [ 3.615343] pci 0000:01:00.0: reg 0x20: initial BAR value 0x00000000 invalid
  302. [ 3.615366] pci 0000:01:00.0: reg 0x20: [io size 0x0080]
  303. [ 3.615415] pci 0000:01:00.0: reg 0x24: [mem 0x00000000-0x00001fff]
  304. [ 3.615464] pci 0000:01:00.0: reg 0x30: [mem 0x00000000-0x0000ffff pref]
  305. [ 3.615517] pci 0000:01:00.0: Max Payload Size set to 256 (was 128, max 512)
  306. [ 3.615863] pci 0000:01:00.0: PME# supported from D3hot
  307. [ 3.616170] pci 0000:01:00.0: 4.000 Gb/s available PCIe bandwidth, limited b)
  308. [ 3.622389] pci_bus 0000:01: busn_res: [bus 01-1f] end is updated to 01
  309. [ 3.622440] pci 0000:00:00.0: BAR 14: assigned [mem 0xfa000000-0xfa0fffff]
  310. [ 3.622472] pci 0000:01:00.0: BAR 6: assigned [mem 0xfa000000-0xfa00ffff pre]
  311. [ 3.622499] pci 0000:01:00.0: BAR 5: assigned [mem 0xfa010000-0xfa011fff]
  312. [ 3.622533] pci 0000:01:00.0: BAR 0: no space for [io size 0x0080]
  313. [ 3.622554] pci 0000:01:00.0: BAR 0: failed to assign [io size 0x0080]
  314. [ 3.622575] pci 0000:01:00.0: BAR 1: no space for [io size 0x0080]
  315. [ 3.622595] pci 0000:01:00.0: BAR 1: failed to assign [io size 0x0080]
  316. [ 3.622616] pci 0000:01:00.0: BAR 2: no space for [io size 0x0080]
  317. [ 3.622636] pci 0000:01:00.0: BAR 2: failed to assign [io size 0x0080]
  318. [ 3.622657] pci 0000:01:00.0: BAR 3: no space for [io size 0x0080]
  319. [ 3.622677] pci 0000:01:00.0: BAR 3: failed to assign [io size 0x0080]
  320. [ 3.622697] pci 0000:01:00.0: BAR 4: no space for [io size 0x0080]
  321. [ 3.622717] pci 0000:01:00.0: BAR 4: failed to assign [io size 0x0080]
  322. [ 3.622740] pci 0000:00:00.0: PCI bridge to [bus 01]
  323. [ 3.622763] pci 0000:00:00.0: bridge window [mem 0xfa000000-0xfa0fffff]
  324. [ 3.623016] pcieport 0000:00:00.0: enabling device (0000 -> 0002)
  325. [ 3.623398] pcieport 0000:00:00.0: PME: Signaling with IRQ 229
  326. [ 3.623775] pcieport 0000:00:00.0: AER: enabled with IRQ 229
  327. [ 3.625095] IPMI message handler: version 39.2
  328. [ 3.627931] dma-pl330 ff6d0000.dma-controller: Loaded driver for PL330 DMAC-0
  329. [ 3.627965] dma-pl330 ff6d0000.dma-controller: DBUFF-32x8bytes Num_Cha2
  330. [ 3.629740] dma-pl330 ff6e0000.dma-controller: Loaded driver for PL330 DMAC-0
  331. [ 3.629771] dma-pl330 ff6e0000.dma-controller: DBUFF-128x8bytes Num_Ch6
  332. [ 3.631832] pwm-regulator: supplied by regulator-dummy
  333. [ 3.632103] vcc5v0_typec: supplied by vcc5v0_usb
  334. [ 3.632953] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
  335. [ 3.635496] ff180000.serial: ttyS0 at MMIO 0xff180000 (irq = 38, base_baud =A
  336. [ 3.635707] serial serial0: tty port ttyS0 registered
  337. [ 3.636383] ff1a0000.serial: ttyS2 at MMIO 0xff1a0000 (irq = 39, base_baud =A
  338. [ 3.777036] printk: console [ttyS2] enabled
  339. [ 3.780021] cacheinfo: Unable to detect cache hierarchy for CPU 0
  340. [ 3.781291] ahci 0000:01:00.0: enabling device (0000 -> 0002)
  341. [ 3.782390] ahci 0000:01:00.0: SSS flag set, parallel bus scan disabled
  342. [ 3.783098] ahci 0000:01:00.0: AHCI 0001.0301 32 slots 5 ports 6 Gbps 0x1f ie
  343. [ 3.783828] ahci 0000:01:00.0: flags: 64bit ncq sntf stag pm led clo pmp fbs
  344. [ 3.788998] scsi host0: ahci
  345. [ 3.789843] scsi host1: ahci
  346. [ 3.790527] scsi host2: ahci
  347. [ 3.791210] scsi host3: ahci
  348. [ 3.791896] scsi host4: ahci
  349. [ 3.792351] ata1: SATA max UDMA/133 abar m8192@0xfa010000 port 0xfa010100 ir0
  350. [ 3.793019] ata2: SATA max UDMA/133 abar m8192@0xfa010000 port 0xfa010180 ir1
  351. [ 3.793685] ata3: SATA max UDMA/133 abar m8192@0xfa010000 port 0xfa010200 ir2
  352. [ 3.794350] ata4: SATA max UDMA/133 abar m8192@0xfa010000 port 0xfa010280 ir3
  353. [ 3.795015] ata5: SATA max UDMA/133 abar m8192@0xfa010000 port 0xfa010300 ir4
  354. [ 3.798917] spi-nor spi0.0: gd25q128 (16384 Kbytes)
  355. [ 3.821458] libphy: Fixed MDIO Bus: probed
  356. [ 3.827338] OF: graph: no port node found in /syscon@ff770000/usb2-phy@e450/t
  357. [ 3.834990] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  358. [ 3.835608] ehci-pci: EHCI PCI platform driver
  359. [ 3.836052] ehci-platform: EHCI generic platform driver
  360. [ 3.838793] ehci-platform fe380000.usb: EHCI Host Controller
  361. [ 3.839460] ehci-platform fe380000.usb: new USB bus registered, assigned bus1
  362. [ 3.840266] ehci-platform fe380000.usb: irq 31, io mem 0xfe380000
  363. [ 3.865341] ehci-platform fe380000.usb: USB 2.0 started, EHCI 1.00
  364. [ 3.866082] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, b6
  365. [ 3.866817] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber1
  366. [ 3.867460] usb usb1: Product: EHCI Host Controller
  367. [ 3.867897] usb usb1: Manufacturer: Linux 5.6.0-1134-ayufan-g652fb97d87eb ehd
  368. [ 3.868568] usb usb1: SerialNumber: fe380000.usb
  369. [ 3.869436] hub 1-0:1.0: USB hub found
  370. [ 3.869803] hub 1-0:1.0: 1 port detected
  371. [ 3.872650] ehci-platform fe3c0000.usb: EHCI Host Controller
  372. [ 3.873314] ehci-platform fe3c0000.usb: new USB bus registered, assigned bus2
  373. [ 3.874101] ehci-platform fe3c0000.usb: irq 33, io mem 0xfe3c0000
  374. [ 3.895335] ehci-platform fe3c0000.usb: USB 2.0 started, EHCI 1.00
  375. [ 3.896071] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, b6
  376. [ 3.896807] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber1
  377. [ 3.897449] usb usb2: Product: EHCI Host Controller
  378. [ 3.897885] usb usb2: Manufacturer: Linux 5.6.0-1134-ayufan-g652fb97d87eb ehd
  379. [ 3.898557] usb usb2: SerialNumber: fe3c0000.usb
  380. [ 3.899406] hub 2-0:1.0: USB hub found
  381. [ 3.899772] hub 2-0:1.0: 1 port detected
  382. [ 3.900677] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
  383. [ 3.901237] ohci-pci: OHCI PCI platform driver
  384. [ 3.901694] ohci-platform: OHCI generic platform driver
  385. [ 3.902365] ohci-platform fe3a0000.usb: Generic Platform OHCI controller
  386. [ 3.903161] ohci-platform fe3a0000.usb: new USB bus registered, assigned bus3
  387. [ 3.903946] ohci-platform fe3a0000.usb: irq 32, io mem 0xfe3a0000
  388. [ 3.969510] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001, b6
  389. [ 3.970246] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber1
  390. [ 3.970888] usb usb3: Product: Generic Platform OHCI controller
  391. [ 3.971415] usb usb3: Manufacturer: Linux 5.6.0-1134-ayufan-g652fb97d87eb ohd
  392. [ 3.972087] usb usb3: SerialNumber: fe3a0000.usb
  393. [ 3.973087] hub 3-0:1.0: USB hub found
  394. [ 3.973486] hub 3-0:1.0: 1 port detected
  395. [ 3.974559] ohci-platform fe3e0000.usb: Generic Platform OHCI controller
  396. [ 3.975448] ohci-platform fe3e0000.usb: new USB bus registered, assigned bus4
  397. [ 3.976305] ohci-platform fe3e0000.usb: irq 34, io mem 0xfe3e0000
  398. [ 4.049609] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001, b6
  399. [ 4.050355] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber1
  400. [ 4.051005] usb usb4: Product: Generic Platform OHCI controller
  401. [ 4.051538] usb usb4: Manufacturer: Linux 5.6.0-1134-ayufan-g652fb97d87eb ohd
  402. [ 4.052217] usb usb4: SerialNumber: fe3e0000.usb
  403. [ 4.053175] hub 4-0:1.0: USB hub found
  404. [ 4.053553] hub 4-0:1.0: 1 port detected
  405. [ 4.054677] uhci_hcd: USB Universal Host Controller Interface driver
  406. [ 4.056373] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
  407. [ 4.057068] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus n5
  408. [ 4.057920] xhci-hcd xhci-hcd.0.auto: hcc params 0x0220fe64 hci version 0x110
  409. [ 4.058786] xhci-hcd xhci-hcd.0.auto: irq 238, io mem 0xfe800000
  410. [ 4.059765] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002, b6
  411. [ 4.060511] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber1
  412. [ 4.061161] usb usb5: Product: xHCI Host Controller
  413. [ 4.061602] usb usb5: Manufacturer: Linux 5.6.0-1134-ayufan-g652fb97d87eb xhd
  414. [ 4.062281] usb usb5: SerialNumber: xhci-hcd.0.auto
  415. [ 4.063272] hub 5-0:1.0: USB hub found
  416. [ 4.063652] hub 5-0:1.0: 1 port detected
  417. [ 4.064415] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
  418. [ 4.065077] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus n6
  419. [ 4.065804] xhci-hcd xhci-hcd.0.auto: Host supports USB 3.0 SuperSpeed
  420. [ 4.066482] usb usb6: We don't know the algorithms for LPM for this host, di.
  421. [ 4.067352] usb usb6: New USB device found, idVendor=1d6b, idProduct=0003, b6
  422. [ 4.068096] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber1
  423. [ 4.068745] usb usb6: Product: xHCI Host Controller
  424. [ 4.069187] usb usb6: Manufacturer: Linux 5.6.0-1134-ayufan-g652fb97d87eb xhd
  425. [ 4.069865] usb usb6: SerialNumber: xhci-hcd.0.auto
  426. [ 4.070838] hub 6-0:1.0: USB hub found
  427. [ 4.071216] hub 6-0:1.0: 1 port detected
  428. [ 4.072152] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
  429. [ 4.072834] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus n7
  430. [ 4.073683] xhci-hcd xhci-hcd.1.auto: hcc params 0x0220fe64 hci version 0x110
  431. [ 4.074586] xhci-hcd xhci-hcd.1.auto: irq 239, io mem 0xfe900000
  432. [ 4.075682] usb usb7: New USB device found, idVendor=1d6b, idProduct=0002, b6
  433. [ 4.076428] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber1
  434. [ 4.077077] usb usb7: Product: xHCI Host Controller
  435. [ 4.077519] usb usb7: Manufacturer: Linux 5.6.0-1134-ayufan-g652fb97d87eb xhd
  436. [ 4.078197] usb usb7: SerialNumber: xhci-hcd.1.auto
  437. [ 4.079173] hub 7-0:1.0: USB hub found
  438. [ 4.079558] hub 7-0:1.0: 1 port detected
  439. [ 4.080304] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
  440. [ 4.080959] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus n8
  441. [ 4.081661] xhci-hcd xhci-hcd.1.auto: Host supports USB 3.0 SuperSpeed
  442. [ 4.082323] usb usb8: We don't know the algorithms for LPM for this host, di.
  443. [ 4.083203] usb usb8: New USB device found, idVendor=1d6b, idProduct=0003, b6
  444. [ 4.083947] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber1
  445. [ 4.084596] usb usb8: Product: xHCI Host Controller
  446. [ 4.085038] usb usb8: Manufacturer: Linux 5.6.0-1134-ayufan-g652fb97d87eb xhd
  447. [ 4.085747] usb usb8: SerialNumber: xhci-hcd.1.auto
  448. [ 4.086753] hub 8-0:1.0: USB hub found
  449. [ 4.087131] hub 8-0:1.0: 1 port detected
  450. [ 4.088057] usbcore: registered new interface driver uas
  451. [ 4.088752] usbcore: registered new interface driver usb-storage
  452. [ 4.089337] usbcore: registered new interface driver ums-alauda
  453. [ 4.089913] usbcore: registered new interface driver ums-cypress
  454. [ 4.090501] usbcore: registered new interface driver ums-datafab
  455. [ 4.091084] usbcore: registered new interface driver ums_eneub6250
  456. [ 4.091679] usbcore: registered new interface driver ums-freecom
  457. [ 4.092273] usbcore: registered new interface driver ums-isd200
  458. [ 4.092849] usbcore: registered new interface driver ums-jumpshot
  459. [ 4.093439] usbcore: registered new interface driver ums-karma
  460. [ 4.094006] usbcore: registered new interface driver ums-onetouch
  461. [ 4.094611] usbcore: registered new interface driver ums-realtek
  462. [ 4.095196] usbcore: registered new interface driver ums-sddr09
  463. [ 4.095809] usbcore: registered new interface driver ums-sddr55
  464. [ 4.096395] usbcore: registered new interface driver ums-usbat
  465. [ 4.097030] usbcore: registered new interface driver usbserial_generic
  466. [ 4.097646] usbserial: USB Serial support registered for generic
  467. [ 4.101087] mousedev: PS/2 mouse device common for all mice
  468. [ 4.103404] i2c i2c-1: of_i2c: modalias failure on /i2c@ff110000/i2s0
  469. [ 4.103997] i2c i2c-1: Failed to create I2C device for /i2c@ff110000/i2s0
  470. [ 4.106678] rk808 0-001b: chip id: 0x0
  471. [ 4.111954] rk808-regulator rk808-regulator: there is no dvs0 gpio
  472. [ 4.112545] rk808-regulator rk808-regulator: there is no dvs1 gpio
  473. [ 4.113173] DCDC_REG1: supplied by vcc5v0_sys
  474. [ 4.114506] DCDC_REG2: supplied by vcc5v0_sys
  475. [ 4.115514] DCDC_REG3: supplied by vcc5v0_sys
  476. [ 4.116170] DCDC_REG4: supplied by vcc5v0_sys
  477. [ 4.117197] LDO_REG1: supplied by vcc5v0_sys
  478. [ 4.118858] LDO_REG2: supplied by vcc5v0_sys
  479. [ 4.120218] LDO_REG3: supplied by vcc5v0_sys
  480. [ 4.121759] LDO_REG4: supplied by vcc5v0_sys
  481. [ 4.123271] LDO_REG5: supplied by vcc5v0_sys
  482. [ 4.124637] LDO_REG6: supplied by vcc5v0_sys
  483. [ 4.126180] LDO_REG7: supplied by vcc5v0_sys
  484. [ 4.126774] ata1: SATA link down (SStatus 0 SControl 300)
  485. [ 4.127567] LDO_REG8: supplied by vcc5v0_sys
  486. [ 4.129090] SWITCH_REG1: supplied by vcc3v3_sys
  487. [ 4.129796] SWITCH_REG2: supplied by vcc3v3_sys
  488. [ 4.134230] rk808-rtc rk808-rtc: registered as rtc0
  489. [ 4.135508] fan53555-regulator 0-0040: FAN53555 Option[8] Rev[1] Detected!
  490. [ 4.136149] fan53555-reg: supplied by vcc5v0_sys
  491. [ 4.137946] vcc1v8_s3: supplied by vcc_1v8
  492. [ 4.139262] fan53555-regulator 0-0041: FAN53555 Option[8] Rev[1] Detected!
  493. [ 4.139905] fan53555-reg: supplied by vcc5v0_sys
  494. [ 4.141350] random: fast init done
  495. [ 4.143537] typec_fusb302 4-0022: No cable types defined, using default cabls
  496. [ 4.144301] OF: graph: no port node found in /i2c@ff3d0000/typec-portc@22
  497. [ 4.152646] device-mapper: uevent: version 1.0.3
  498. [ 4.153698] device-mapper: ioctl: 4.42.0-ioctl (2020-02-27) initialised: dm-m
  499. [ 4.156386] energy_model: pd0: hertz/watts ratio non-monotonically decreasin0
  500. [ 4.162064] sdhci: Secure Digital Host Controller Interface driver
  501. [ 4.162624] sdhci: Copyright(c) Pierre Ossman
  502. [ 4.163623] Synopsys Designware Multimedia Card Interface Driver
  503. [ 4.165376] dwmmc_rockchip fe310000.mmc: IDMAC supports 32-bit address mode.
  504. [ 4.166055] dwmmc_rockchip fe310000.mmc: Using internal DMA controller.
  505. [ 4.166657] dwmmc_rockchip fe310000.mmc: Version ID is 270a
  506. [ 4.167217] dwmmc_rockchip fe310000.mmc: DW MMC controller at irq 28,32 bit o
  507. [ 4.168369] dwmmc_rockchip fe310000.mmc: allocated mmc-pwrseq
  508. [ 4.169005] mmc_host mmc0: card is non-removable.
  509. [ 4.182395] mmc_host mmc0: Bus speed (slot 0) = 400000Hz (slot req 400000Hz,)
  510. [ 4.196614] dwmmc_rockchip fe320000.mmc: IDMAC supports 32-bit address mode.
  511. [ 4.197283] dwmmc_rockchip fe320000.mmc: Using internal DMA controller.
  512. [ 4.197880] dwmmc_rockchip fe320000.mmc: Version ID is 270a
  513. [ 4.198442] dwmmc_rockchip fe320000.mmc: DW MMC controller at irq 29,32 bit o
  514. [ 4.199414] dwmmc_rockchip fe320000.mmc: Got CD GPIO
  515. [ 4.212710] mmc_host mmc1: Bus speed (slot 0) = 400000Hz (slot req 400000Hz,)
  516. [ 4.227027] sdhci-pltfm: SDHCI platform and OF driver helper
  517. [ 4.228886] mmc2: CQHCI version 5.10
  518. [ 4.230177] mmc0: queuing unknown CIS tuple 0x80 (2 bytes)
  519. [ 4.232237] mmc0: queuing unknown CIS tuple 0x80 (3 bytes)
  520. [ 4.234352] mmc0: queuing unknown CIS tuple 0x80 (3 bytes)
  521. [ 4.237644] mmc0: queuing unknown CIS tuple 0x80 (7 bytes)
  522. [ 4.254910] mmc2: SDHCI controller on fe330000.sdhci [fe330000.sdhci] using A
  523. [ 4.257853] ledtrig-cpu: registered to indicate activity on CPUs
  524. [ 4.258659] hid: raw HID events driver (C) Jiri Kosina
  525. [ 4.259262] usbcore: registered new interface driver usbhid
  526. [ 4.259757] usbhid: USB HID core driver
  527. [ 4.260274] hantro-vpu ff650000.video-codec: Adding to iommu group 0
  528. [ 4.261328] hantro-vpu ff650000.video-codec: registered rockchip,rk3399-vpu-0
  529. [ 4.262222] hantro-vpu ff650000.video-codec: registered rockchip,rk3399-vpu-1
  530. [ 4.266382] Initializing XFRM netlink socket
  531. [ 4.267446] NET: Registered protocol family 10
  532. [ 4.297766] mmc_host mmc0: Bus speed (slot 0) = 148500000Hz (slot req 150000)
  533. [ 4.327544] Segment Routing with IPv6
  534. [ 4.327954] mip6: Mobile IPv6
  535. [ 4.328225] NET: Registered protocol family 17
  536. [ 4.328867] Key type dns_resolver registered
  537. [ 4.329777] registered taskstats version 1
  538. [ 4.330255] zswap: loaded using pool lzo/zbud
  539. [ 4.330942] Key type ._fscrypt registered
  540. [ 4.331298] Key type .fscrypt registered
  541. [ 4.331644] Key type fscrypt-provisioning registered
  542. [ 4.332148] Key type big_key registered
  543. [ 4.351940] Key type encrypted registered
  544. [ 4.381719] rk808-rtc rk808-rtc: setting system clock to 2013-01-18T08:50:20)
  545. [ 4.382501] of_cfs_init
  546. [ 4.382842] of_cfs_init: OK
  547. [ 4.383781] ALSA device list:
  548. [ 4.384056] No soundcards found.
  549. [ 4.384608] ttyS2 - failed to request DMA
  550. [ 4.455615] dwmmc_rockchip fe310000.mmc: Successfully tuned phase to 166
  551. [ 4.457226] ata2: SATA link down (SStatus 0 SControl 300)
  552. [ 4.461630] mmc0: new ultra high speed SDR104 SDIO card at address 0001
  553. [ 4.687634] random: crng init done
  554. [ 4.797794] ata3: SATA link down (SStatus 0 SControl 300)
  555. [ 5.127410] ata4: SATA link down (SStatus 0 SControl 300)
  556. [ 5.625396] ata5: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
  557. [ 5.664796] ata5.00: ATA-10: ST2000LM015-2E8174, SDM1, max UDMA/133
  558. [ 5.665407] ata5.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth 32), AA
  559. [ 5.795521] ata5.00: configured for UDMA/133
  560. [ 5.796650] scsi 4:0:0:0: Direct-Access ATA ST2000LM015-2E81 SDM1 P5
  561. [ 5.798024] sd 4:0:0:0: Attached scsi generic sg0 type 0
  562. [ 5.798147] sd 4:0:0:0: [sda] 3907029168 512-byte logical blocks: (2.00 TB/1)
  563. [ 5.799179] sd 4:0:0:0: [sda] 4096-byte physical blocks
  564. [ 5.799670] sd 4:0:0:0: [sda] Write Protect is off
  565. [ 5.800149] sd 4:0:0:0: [sda] Write cache: enabled, read cache: enabled, doeA
  566. [ 5.853000] sda: sda1 sda2 sda3 sda4
  567. [ 5.856082] sd 4:0:0:0: [sda] Attached SCSI disk
  568. [ 5.857176] Freeing unused kernel memory: 1216K
  569. [ 5.905489] Run /init as init process
  570. Loading, please wait...
  571. Starting version 241
  572. [ 6.162568] rk_gmac-dwmac fe300000.ethernet: IRQ eth_wake_irq not found
  573. [ 6.163158] rk_gmac-dwmac fe300000.ethernet: IRQ eth_lpi not found
  574. [ 6.164671] rk_gmac-dwmac fe300000.ethernet: PTP uses main clock
  575. [ 6.165440] rk_gmac-dwmac fe300000.ethernet: clock input or output? (input).
  576. [ 6.166083] rk_gmac-dwmac fe300000.ethernet: TX delay(0x28).
  577. [ 6.166590] rk_gmac-dwmac fe300000.ethernet: RX delay(0x11).
  578. [ 6.167105] rk_gmac-dwmac fe300000.ethernet: integrated PHY? (no).
  579. [ 6.167718] rk_gmac-dwmac fe300000.ethernet: cannot get clock clk_mac_speed
  580. [ 6.168341] rk_gmac-dwmac fe300000.ethernet: clock input from PHY
  581. [ 6.173900] rk_gmac-dwmac fe300000.ethernet: init for RGMII
  582. [ 6.174717] rk_gmac-dwmac fe300000.ethernet: User ID: 0x10, Synopsys ID: 0x35
  583. [ 6.175403] rk_gmac-dwmac fe300000.ethernet: DWMAC1000
  584. [ 6.175875] rk_gmac-dwmac fe300000.ethernet: DMA HW capability register suppd
  585. [ 6.176536] rk_gmac-dwmac fe300000.ethernet: RX Checksum Offload Engine suppd
  586. [ 6.177200] rk_gmac-dwmac fe300000.ethernet: COE Type 2
  587. [ 6.177664] rk_gmac-dwmac fe300000.ethernet: TX Checksum insertion supported
  588. [ 6.178286] rk_gmac-dwmac fe300000.ethernet: Wake-Up On Lan supported
  589. [ 6.178907] rk_gmac-dwmac fe300000.ethernet: Normal descriptors
  590. [ 6.179439] rk_gmac-dwmac fe300000.ethernet: Ring mode enabled
  591. [ 6.179957] rk_gmac-dwmac fe300000.ethernet: Enable RX Mitigation via HW Watr
  592. [ 6.192050] input: gpio-keys as /devices/platform/gpio-keys/input/input0
  593. [ 6.297912] libphy: stmmac: probed
  594. [ 6.298240] RTL8211F Gigabit Ethernet stmmac-0:00: attached PHY driver [RTL8)
  595. [ 6.299340] RTL8211F Gigabit Ethernet stmmac-0:01: attached PHY driver [RTL8)
  596. Begin: Loading essential drivers ... done.
  597. Begin: Running /scripts/init-premount ... done.
  598. Begin: Mounting root file system ... Begin: Running /scripts/local-top ... done.
  599. Begin: Running /scripts/local-premount ... done.
  600. Warning: fsck not present, so skipping root file system
  601. [ 6.679823] EXT4-fs (sda4): mounted filesystem with writeback data mode. Opt)
  602. done.
  603. Begin: Running /scripts/local-bottom ... done.
  604. Begin: Running /scripts/init-bottom ... done.
  605. [ 7.329885] systemd[1]: System time before build time, advancing clock.
  606. [ 7.346557] systemd[1]: systemd 241 running in system mode. (+PAM +AUDIT +SE)
  607. [ 7.349024] systemd[1]: Detected architecture arm64.
  608.  
  609. Welcome to Debian GNU/Linux 10 (buster)!
  610.  
  611. [ 7.421990] systemd[1]: Set hostname to <rockpro64>.
  612. [ 8.111759] systemd[1]: Started Dispatch Password Requests to Console Direct.
  613. [ OK ] Started Dispatch Password …ts to Console Directory Watch.
  614. [ 8.136041] systemd[1]: Listening on Syslog Socket.
  615. [ OK ] Listening on Syslog Socket.
  616. [ 8.165846] systemd[1]: Listening on initctl Compatibility Named Pipe.
  617. [ OK ] Listening on initctl Compatibility Named Pipe.
  618. [ 8.196138] systemd[1]: Listening on fsck to fsckd communication Socket.
  619. [ OK ] Listening on fsck to fsckd communication Socket.
  620. [ 8.226133] systemd[1]: Listening on udev Kernel Socket.
  621. [ OK ] Listening on udev Kernel Socket.
  622. [ 8.228553] systemd[1]: Listening on Journal Socket.
  623. [ OK ] Listening on Journal Socket.
  624. [ 8.265880] systemd[1]: Mounting Huge Pages File System...
  625. Mounting Huge Pages File System...
  626. Starting Restore / save the current clock...
  627. Mounting POSIX Message Queue File System...
  628. Starting Set the console keyboard layout...
  629. Mounting Kernel Debug File System...
  630. [ OK ] Created slice system-systemd\x2dfsck.slice.
  631. [ OK ] Created slice User and Session Slice.
  632. [ OK ] Reached target Slices.
  633. [ OK ] Reached target System Time Synchronized.
  634. Starting Remount Root and Kernel File Systems...
  635. [ 8.558000] EXT4-fs (sda4): re-mounted. Opts: (null)
  636. Starting Nameserver information manager...
  637. Starting Create list of re…odes for the current kernel...
  638. [ OK ] Set up automount Arbitrary…s File System Automount Point.
  639. [ OK ] Started Forward Password R…uests to Wall Directory Watch.
  640. [ OK ] Reached target Local Encrypted Volumes.
  641. [ OK ] Reached target Paths.
  642. [ OK ] Listening on Journal Socket (/dev/log).
  643. [ OK ] Reached target Swap.
  644. Starting Journal Service...
  645. [ OK ] Created slice system-getty.slice.
  646. [ OK ] Listening on udev Control Socket.
  647. Starting udev Coldplug all Devices...
  648. [ OK ] Reached target Remote File Systems.
  649. [ OK ] Created slice system-serial\x2dgetty.slice.
  650. Starting Load Kernel Modules...
  651. [ OK ] Started Journal Service.
  652. [ OK ] Mounted Huge Pages File System.
  653. [ OK ] Started Restore / save the current clock.
  654. [ OK ] Mounted POSIX Message Queue File System.
  655. [ OK ] Started Set the console keyboard layout.
  656. [ OK ] Mounted Kernel Debug File System.
  657. [ OK ] Started Remount Root and Kernel File Systems.
  658. [ OK ] Started Create list of req… nodes for the current kernel.
  659. [ OK ] Started Load Kernel Modules.
  660. [ OK ] Started Nameserver information manager.
  661. Mounting FUSE Control File System...
  662. Mounting Kernel Configuration File System...
  663. Starting Apply Kernel Variables...
  664. Starting Create System Users...
  665. Starting Load/Save Random Seed...
  666. Starting Rebuild Hardware Database...
  667. Starting Flush Journal to Persistent Storage...
  668. [ OK ] Started udev Coldplug all Devices.
  669. [ OK ] Mounted FUSE Control File System.
  670. [ OK ] Mounted Kernel Configuration File System.
  671. [ OK ] Started Apply Kernel Variables.
  672. [ OK ] Started Create System Users.
  673. [ OK ] Started Load/Save Random Seed.
  674. Starting Create Static Device Nodes in /dev...
  675. Starting Helper to synchronize boot up for ifupdown...
  676. [ OK ] Started Create Static Device Nodes in /dev.
  677. [ 9.796838] systemd-journald[515]: Received request to flush runtime journal1
  678. [ OK ] Reached target Local File Systems (Pre).
  679. [ OK ] Started Flush Journal to Persistent Storage.
  680. [ OK ] Started Helper to synchronize boot up for ifupdown.
  681. [ OK ] Started Rebuild Hardware Database.
  682. Starting udev Kernel Device Manager...
  683. [ OK ] Started udev Kernel Device Manager.
  684. [ OK ] Found device /dev/ttyS2.
  685. [ 10.795369] phy phy-ff770000.syscon:usb2-phy@e450.2: charger = USB_DCP_CHARGR
  686. [ 10.798091] es8316 1-0011: Failed to get IRQ 0: -22
  687. [ OK ] Found device /sys/subsystem/net/devices/eth0.
  688. [ 10.982441] rockchip-rga ff680000.rga: HW Version: 0x03.02
  689. [ 10.983312] rockchip-rga ff680000.rga: Registered rockchip-rga as /dev/video2
  690. [ 11.012569] platform regulatory.0: Direct firmware load for regulatory.db fa2
  691. [ 11.013333] cfg80211: failed to load regulatory.db
  692. [ 11.094110] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac4359-sdio f9
  693. [ 11.095287] usbcore: registered new interface driver brcmfmac
  694. [ 11.095908] brcmfmac mmc0:0001:1: Direct firmware load for brcm/brcmfmac43592
  695. [ 11.124880] Bluetooth: Core ver 2.22
  696. [ 11.125243] NET: Registered protocol family 31
  697. [ 11.125668] Bluetooth: HCI device and connection manager initialized
  698. [ 11.126556] Bluetooth: HCI socket layer initialized
  699. [ 11.127000] Bluetooth: L2CAP socket layer initialized
  700. [ 11.127452] Bluetooth: SCO socket layer initialized
  701. [ OK ] Found device ST2000LM015-2E8174 boot-efi.
  702. [ 11.173141] panfrost ff9a0000.gpu: clock rate = 500000000
  703. [ 11.173905] panfrost ff9a0000.gpu: mali-t860 id 0x860 major 0x2 minor 0x0 st0
  704. [ 11.174592] panfrost ff9a0000.gpu: features: 00000000,100e77bf, issues: 00000
  705. [ 11.175358] panfrost ff9a0000.gpu: Features: L2:0x07120206 Shader:0x000000007
  706. [ 11.176403] panfrost ff9a0000.gpu: shader_present=0xf l2_present=0x1
  707. [ 11.178913] [drm] Initialized panfrost 1.1.0 20180908 for ff9a0000.gpu on mi0
  708. Starting File System Check…/dev/disk/by-label/boot-efi...
  709. [ 11.235771] rockchip-vop ff8f0000.vop: Adding to iommu group 1
  710. [ 11.237353] rockchip-vop ff900000.vop: Adding to iommu group 2
  711. [ OK ] Found device ST2000LM015-2E8174 linux-boot.
  712. [ 11.243731] rockchip-drm display-subsystem: bound ff8f0000.vop (ops vop_comp)
  713. [ 11.246631] rockchip-drm display-subsystem: bound ff900000.vop (ops vop_comp)
  714. [ 11.247813] dwhdmi-rockchip ff940000.hdmi: Detected HDMI TX controller v2.11)
  715. [ 11.249619] rockchip-drm display-subsystem: bound ff940000.hdmi (ops dw_hdmi)
  716. [ 11.250479] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
  717. [ 11.251063] [drm] No driver support for vblank timestamp query.
  718. [ OK ] Started File System Check Daemon to report status.
  719. [ 11.282182] asoc-audio-graph-card sound: ES8316 HiFi <-> ff890000.i2s mappink
  720. [ 11.282863] asoc-audio-graph-card sound: ASoC: no DMI vendor name!
  721. [ 11.304775] Bluetooth: HCI UART driver ver 2.3
  722. [ 11.304780] Bluetooth: HCI UART protocol H4 registered
  723. [ 11.304781] Bluetooth: HCI UART protocol BCSP registered
  724. [ 11.304814] Bluetooth: HCI UART protocol LL registered
  725. [ 11.304816] Bluetooth: HCI UART protocol ATH3K registered
  726. [ 11.304836] Bluetooth: HCI UART protocol Three-wire (H5) registered
  727. [ 11.305001] Bluetooth: HCI UART protocol Intel registered
  728. [ 11.305076] Bluetooth: HCI UART protocol Broadcom registered
  729. [ 11.305092] Bluetooth: HCI UART protocol QCA registered
  730. [ 11.305117] Bluetooth: HCI UART protocol Marvell registered
  731. [ 11.321018] Console: switching to colour frame buffer device 240x67
  732. [ 11.381178] rockchip-drm display-subsystem: fb0: rockchipdrmfb frame buffer e
  733. Starting File System Check…ev/disk/by-label/linux-boot...
  734. [ 11.425606] ttyS0 - failed to request DMA
  735. [ 11.445689] [drm] Initialized rockchip 1.0.0 20140818 for display-subsystem 1
  736. [ 11.450762] Registered IR keymap rc-cec
  737. [ 11.450925] rc rc0: dw_hdmi as /devices/platform/ff940000.hdmi/rc/rc0
  738. [ 11.451075] input: dw_hdmi as /devices/platform/ff940000.hdmi/rc/rc0/input1
  739. [ 11.480386] asoc-simple-card hdmi-sound: i2s-hifi <-> ff8a0000.i2s mapping ok
  740. [ 11.482942] asoc-simple-card hdmi-sound: ASoC: no DMI vendor name!
  741. [ OK ] Started File System Check on /dev/disk/by-label/boot-efi.
  742. [ 11.679994] Bluetooth: hci0: BCM: chip id 121
  743. [ 11.682838] Bluetooth: hci0: BCM: features 0x0e
  744. [ OK ] Started File System Check …/dev/disk/by-label/linux-boot.
  745. [ 11.706510] Bluetooth: hci0: BCM4359C0
  746. [ 11.706954] Bluetooth: hci0: BCM4359C0 (003.001.006) build 0000
  747. [ 11.707711] bluetooth hci0: Direct firmware load for brcm/BCM4359C0.hcd fail2
  748. [ 11.708635] Bluetooth: hci0: BCM: Patch brcm/BCM4359C0.hcd not found
  749. [ OK ] Reached target Bluetooth.
  750. Mounting /boot...
  751. [ OK ] Listening on Load/Save RF …itch Status /dev/rfkill Watch.
  752. Starting Load/Save RF Kill Switch Status...
  753. [ 11.909111] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts:)
  754. [ 11.909997] ext4 filesystem being mounted at /boot supports timestamps until)
  755. [ OK ] Mounted /boot.
  756. Mounting /boot/efi...
  757. [ OK ] Mounted /boot/efi.
  758. [ OK ] Started Load/Save RF Kill Switch Status.
  759. [ OK ] Reached target Local File Systems.
  760. Starting Raise network interfaces...
  761. [ OK ] Started ifup for eth0.
  762. Starting Create Volatile Files and Directories...
  763. Starting Set console font and keymap...
  764. [ 12.105374] brcmfmac: brcmf_sdio_htclk: HT Avail timeout (1000000): clkctl 00
  765. [ OK ] Started Set console font and keymap.
  766. [ OK ] Started Create Volatile Files and Directories.
  767. Starting Update UTMP about System Boot/Shutdown...
  768. [ OK ] Started Raise network interfaces.
  769. [ OK ] Started Update UTMP about System Boot/Shutdown.
  770. [ 12.380210] rk_gmac-dwmac fe300000.ethernet eth0: PHY [stmmac-0:00] driver [)
  771. [ OK ] Reached target System Initialization.
  772. [ 12.407521] rk_gmac-dwmac fe300000.ethernet eth0: No Safety Features supportd
  773. [ 12.408297] rk_gmac-dwmac fe300000.ethernet eth0: PTP not supported by HW
  774. [ 12.408970] rk_gmac-dwmac fe300000.ethernet eth0: configuring for phy/rgmii e
  775. [ OK ] Started Daily rotation of log files.
  776. [ OK ] Listening on D-Bus System Message Bus Socket.
  777. [ OK ] Listening on Avahi mDNS/DNS-SD Stack Activation Socket.
  778. [ OK ] Reached target Sockets.
  779. [ OK ] Reached target Basic System.
  780. Starting Login Service...
  781. Starting Start bluetooth on ttyS0...
  782. [ OK ] Started Regular background program processing daemon.
  783. Starting Generate SSH keys if not there...
  784. [ OK ] Started D-Bus System Message Bus.
  785. [ OK ] Started Daily Cleanup of Temporary Directories.
  786. Starting Avahi mDNS/DNS-SD Stack...
  787. [ OK ] Started Daily apt download activities.
  788. [ OK ] Started Daily apt upgrade and clean activities.
  789. [ OK ] Reached target Timers.
  790. [ OK ] Started Manage Sound Card State (restore and store).
  791. Starting Save/Restore Sound Card State...
  792. Starting WPA supplicant...
  793. Starting System Logging Service...
  794. Starting Rock 64 First boot...
  795. Starting Resets System Activity Data Collector...
  796. Starting Network Manager...
  797. [ OK ] Started System Logging Service.
  798. [ 13.095397] rd 0-5: Disabling EAS, schedutil is mandatory
  799. [ OK ] Started Generate SSH keys if not there.
  800. [ OK ] Started Save/Restore Sound Card State.
  801. [ OK ] Started Rock 64 First boot.
  802. [ OK ] Started Resets System Activity Data Collector.
  803. [ OK ] Reached target Sound Card.
  804. [ OK ] Started Avahi mDNS/DNS-SD Stack.
  805. [ OK ] Started WPA supplicant.
  806. [ OK ] Started Login Service.
  807. [ OK ] Started Network Manager.
  808. Starting Hostname Service...
  809. [ OK ] Reached target Network.
  810. Starting Network Time Service...
  811. Starting Permit User Sessions...
  812. Starting OpenBSD Secure Shell server...
  813. [ OK ] Started Permit User Sessions.
  814. [ OK ] Started Hostname Service.
  815. [ OK ] Started Serial Getty on ttyS2.
  816. [ OK ] Started Getty on tty1.
  817. [ OK ] Reached target Login Prompts.
  818. [ OK ] Started Network Time Service.
  819. Starting Network Manager Script Dispatcher Service...
  820. [ OK ] Started OpenBSD Secure Shell server.
  821. [ OK ] Started Network Manager Script Dispatcher Service.
  822. Starting Authorization Manager...
  823. [ OK ] Started Authorization Manager.
  824. [FAILED] Failed to start Start bluetooth on ttyS0.
  825. See 'systemctl status sdio-hciattach.service' for details.
  826. [ OK ] Reached target Multi-User System.
  827. [ OK ] Reached target Graphical Interface.
  828. Starting Update UTMP about System Runlevel Changes...
  829. [ OK ] Started Update UTMP about System Runlevel Changes.
Advertisement
RAW Paste Data Copied
Advertisement