API tools faq
paste
Advertisement
unkypoo

MR33 Boot Log

unkypoo
Dec 22nd, 2018
579
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 57.82 KB | None | 0 0
raw download clone embed print report
  1. =~=~=~=~=~=~=~=~=~=~=~= PuTTY log 2018.12.22 14:33:23 =~=~=~=~=~=~=~=~=~=~=~=
  2.  
  3. Format: Log Type - Time(microsec) - Message - Optional Info
  4. Log Type: B - Since Boot(Power On Reset), D - Delta, S - Statistic
  5. S - QC_IMAGE_VERSION_STRING=BOOT.BF.3.1.1-00096
  6. S - IMAGE_VARIANT_STRING=DAACANAZA
  7. S - OEM_IMAGE_VERSION_STRING=CRM
  8. S - Boot Config, 0x00000025
  9. S - Core 0 Frequency, 0 MHz
  10. B - 261 - PBL, Start
  11. B - 1339 - bootable_media_detect_entry, Start
  12. B - 2609 - bootable_media_detect_success, Start
  13. B - 2623 - elf_loader_entry, Start
  14. B - 4030 - auth_hash_seg_entry, Start
  15. B - 6179 - auth_hash_seg_exit, Start
  16. B - 73719 - elf_segs_hash_verify_entry, Start
  17. B - 194080 - PBL, End
  18. B - 194104 - SBL1, Start
  19. B - 282745 - pm_device_init, Start
  20. D - 6 - pm_device_init, Delta
  21. B - 284268 - boot_flash_init, Start
  22. D - 87416 - boot_flash_init, Delta
  23. B - 375732 - boot_config_data_table_init, Start
  24. D - 13985 - boot_config_data_table_init, Delta - (419 Bytes)
  25. B - 392409 - clock_init, Start
  26. D - 7582 - clock_init, Delta
  27. B - 403391 - CDT version:2,Platform ID:8,Major ID:1,Minor ID:0,Subtype:1
  28. B - 406879 - sbl1_ddr_set_params, Start
  29. B - 411864 - cpr_init, Start
  30. D - 2 - cpr_init, Delta
  31. B - 416354 - Pre_DDR_clock_init, Start
  32. D - 5 - Pre_DDR_clock_init, Delta
  33. D - 13144 - sbl1_ddr_set_params, Delta
  34. B - 429635 - pm_driver_init, Start
  35. D - 2 - pm_driver_init, Delta
  36. B - 500289 - sbl1_wait_for_ddr_training, Start
  37. D - 27 - sbl1_wait_for_ddr_training, Delta
  38. B - 515814 - Image Load, Start
  39. D - 140732 - QSEE Image Loaded, Delta - (262104 Bytes)
  40. B - 657045 - Image Load, Start
  41. D - 2115 - SEC Image Loaded, Delta - (2048 Bytes)
  42. B - 667199 - Image Load, Start
  43. D - 123195 - APPSBL Image Loaded, Delta - (285640 Bytes)
  44. B - 790818 - QSEE Execution, Start
  45. D - 56 - QSEE Execution, Delta
  46. B - 797074 - SBL1, End
  47. D - 604942 - SBL1, Delta
  48. S - Flash Throughput, 1994 KB/s (550211 Bytes, 275895 us)
  49. S - DDR Frequency, 672 MHz
  50.  
  51.  
  52. U-Boot 2017.07-RELEASE-g78ed34f31579 (Sep 29 2017 - 07:43:44 -0700)
  53.  
  54. DRAM: 242 MiB
  55. machid : 0x8010001
  56. Product: meraki_Stinkbug
  57. NAND: ONFI device found
  58. ID = 1d80f101
  59. Vendor = 1
  60. Device = f1
  61. 128 MiB
  62. Using default environment
  63.  
  64. In: serial
  65. Out: serial
  66. Err: serial
  67. machid: 8010001
  68. ubi0: attaching mtd1
  69. ubi0: scanning is finished
  70. ubi0: attached mtd1 (name "mtd=0", size 115 MiB)
  71. ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
  72. ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
  73. ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096
  74. ubi0: good PEBs: 920, bad PEBs: 0, corrupted PEBs: 0
  75. ubi0: user volume: 6, internal volumes: 1, max. volumes count: 128
  76. ubi0: max/mean erase counter: 3/1, WL threshold: 4096, image sequence number: 2086049366
  77. ubi0: available PEBs: 456, total reserved PEBs: 464, PEBs reserved for bad PEB handling: 20
  78. Read 0 bytes from volume part.safe to 84000000
  79. No size specified -> Using max size (10051584)
  80. ## Loading kernel from FIT Image at 84000000 ...
  81. Using 'config@1' configuration
  82. Trying 'kernel@1' kernel subimage
  83. Description: Insects Kernel
  84. Type: Kernel Image
  85. Compression: uncompressed
  86. Data Start: 0x840000f4
  87. Data Size: 1730296 Bytes = 1.7 MiB
  88. Architecture: ARM
  89. OS: Linux
  90. Load Address: 0x80208000
  91. Entry Point: 0x80208000
  92. Hash algo: sha1
  93. Hash value: 974016dbadaaf89e6d56ebd64f1399796a1763d4
  94. Verifying Hash Integrity ... sha1+ OK
  95. ## Loading ramdisk from FIT Image at 84000000 ...
  96. Using 'config@1' configuration
  97. Trying 'ramdisk@1' ramdisk subimage
  98. Description: Insect Ramdisk
  99. Type: RAMDisk Image
  100. Compression: uncompressed
  101. Data Start: 0x841a68d8
  102. Data Size: 8207108 Bytes = 7.8 MiB
  103. Architecture: ARM
  104. OS: Linux
  105. Load Address: 0x82200000
  106. Entry Point: 0x82200000
  107. Hash algo: sha1
  108. Hash value: bc505ed90ee19c182cbf7ebfbdd47193978f8d35
  109. Verifying Hash Integrity ... sha1+ OK
  110. Loading ramdisk from 0x841a68d8 to 0x82200000
  111. ## Loading fdt from FIT Image at 84000000 ...
  112. Using 'config@1' configuration
  113. Trying 'fdt@1' fdt subimage
  114. Description: MR33 Device Tree
  115. Type: Flat Device Tree
  116. Compression: uncompressed
  117. Data Start: 0x8497a4c8
  118. Data Size: 36602 Bytes = 35.7 KiB
  119. Architecture: ARM
  120. Hash algo: sha1
  121. Hash value: caee69ca88830c8d347f3ca9d32c678672d647ee
  122. Verifying Hash Integrity ... sha1+ OK
  123. Loading fdt from 0x8497a4c8 to 0x89000000
  124. Booting using the fdt blob at 0x89000000
  125. Loading Kernel Image ... OK
  126. Using Device Tree in place at 89000000, end 8900bef9
  127. Using machid 0x8010001 from environment
  128.  
  129. Starting kernel ...
  130.  
  131. [ 0.000000] Booting Linux on physical CPU 0x0
  132. [ 0.000000] Linux version 3.14.79 (jenkins@dal247.meraki.com) (gcc version 4.8.3 (GCC) ) #2 SMP PREEMPT Fri Sep 28 17:12:57 PDT 2018
  133. [ 0.000000] CPU: ARMv7 Processor [410fc075] revision 5 (ARMv7), cr=10c5387d
  134. [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
  135. [ 0.000000] Machine model: Meraki MR33
  136. [ 0.000000] Memory policy: Data cache writealloc
  137. [ 0.000000] PERCPU: Embedded 7 pages/cpu @cfcc9000 s7104 r8192 d13376 u32768
  138. [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 61954
  139. [ 0.000000] Kernel command line: loader=u-boot maxcpus=1 console=ttyMSM0,115200n8 maxcpus=1 ubi.mtd=ubi clk_ignore_unused
  140. [ 0.000000] PID hash table entries: 1024 (order: 0, 4096 bytes)
  141. [ 0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
  142. [ 0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
  143. [ 0.000000] Memory: 233808K/249856K available (3316K kernel code, 315K rwdata, 1192K rodata, 150K init, 549K bss, 16048K reserved, 0K highmem)
  144. [ 0.000000] Virtual kernel memory layout:
  145. [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
  146. [ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
  147. [ 0.000000] vmalloc : 0xd0000000 - 0xff000000 ( 752 MB)
  148. [ 0.000000] lowmem : 0xc0000000 - 0xcff00000 ( 255 MB)
  149. [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
  150. [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
  151. [ 0.000000] .text : 0xc0208000 - 0xc066f3f0 (4509 kB)
  152. [ 0.000000] .init : 0xc0670000 - 0xc0695bc0 ( 151 kB)
  153. [ 0.000000] .data : 0xc0696000 - 0xc06e4c80 ( 316 kB)
  154. [ 0.000000] .bss : 0xc06e4c8c - 0xc076e42c ( 550 kB)
  155. [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
  156. [ 0.000000] Preemptible hierarchical RCU implementation.
  157. [ 0.000000] NR_IRQS:16 nr_irqs:16 16
  158. [ 0.000000] Architected cp15 timer(s) running at 48.00MHz (virt).
  159. [ 0.000008] sched_clock: 56 bits at 48MHz, resolution 20ns, wraps every 2863311552512ns
  160. [ 0.000019] Switching to timer-based delay loop
  161. [ 0.000249] Calibrating delay loop (skipped), value calculated using timer frequency.. 96.00 BogoMIPS (lpj=480000)
  162. [ 0.000266] pid_max: default: 32768 minimum: 301
  163. [ 0.000518] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
  164. [ 0.000532] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
  165. [ 0.011611] CPU: Testing write buffer coherency: ok
  166. [ 0.011955] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
  167. [ 0.012030] Setting up static identity map for 0x80524d90 - 0x80524de8
  168. [ 0.070016] Brought up 1 CPUs
  169. [ 0.070031] SMP: Total of 1 processors activated (96.00 BogoMIPS).
  170. [ 0.070041] CPU: All CPU(s) started in SVC mode.
  171. [ 0.070631] devtmpfs: initialized
  172. [ 0.080384] VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 5
  173. [ 0.081021] pinctrl core: initialized pinctrl subsystem
  174. [ 0.081957] regulator-dummy: no parameters
  175. [ 0.083842] NET: Registered protocol family 16
  176. [ 0.085344] DMA: preallocated 2048 KiB pool for atomic coherent allocations
  177. [ 0.087496] cpuidle: using governor ladder
  178. [ 0.087510] cpuidle: using governor menu
  179. [ 0.105022] No ATAGs?
  180. [ 0.105113]
  181. [ 0.105113] Version Rollback Feature Disabled
  182. [ 0.106893] Error: Driver 'msm8x74-pinctrl' is already registered, aborting...
  183. [ 0.111020] i2c-msm-v2 78b7000.i2c: probing driver i2c-msm-v2
  184. [ 0.112269] i2c-msm-v2 78b8000.i2c: probing driver i2c-msm-v2
  185. [ 0.114176] sps:sps is ready.
  186. [ 0.126290] bio: create slab <bio-0> at 0
  187. [ 0.128934] SD0 VccQ: 1800 <--> 3000 mV
  188. [ 0.132045] msm_bus_fabric_init_driver
  189. [ 0.132224] msm_bus_device 580000.ad-hoc-bus: Util-fact is missing, default to 100
  190. [ 0.132242] msm_bus_device 580000.ad-hoc-bus: Vrail-comp is missing, default to 100
  191. [ 0.132262] msm_bus_device 580000.ad-hoc-bus: Failed to get bus clk for bus4096 ctx1
  192. [ 0.132308] msm_bus_device 580000.ad-hoc-bus: Util-fact is missing, default to 100
  193. [ 0.132323] msm_bus_device 580000.ad-hoc-bus: Vrail-comp is missing, default to 100
  194. [ 0.132340] msm_bus_device 580000.ad-hoc-bus: Failed to get bus clk for bus1024 ctx1
  195. [ 0.174057] Bluetooth: Core ver 2.18
  196. [ 0.174276] NET: Registered protocol family 31
  197. [ 0.174289] Bluetooth: HCI device and connection manager initialized
  198. [ 0.174308] Bluetooth: HCI socket layer initialized
  199. [ 0.174324] Bluetooth: L2CAP socket layer initialized
  200. [ 0.174387] Bluetooth: SCO socket layer initialized
  201. [ 0.174601] 80000.qcom,pcie supply vreg-3.3 not found, using dummy regulator
  202. [ 0.174665] 80000.qcom,pcie supply vreg-1.8 not found, using dummy regulator
  203. [ 0.174717] 80000.qcom,pcie supply vreg-0.9 not found, using dummy regulator
  204. [ 0.174768] 80000.qcom,pcie supply gdsc-vdd not found, using dummy regulator
  205. [ 0.270516] msm_pcie_enable: msm_pcie_enable: PCIe: trigger the reset of endpoint of RC0.
  206. [ 0.280468] msm_pcie_enable: msm_pcie_enable: PCIe RC0 PHY is ready!
  207. [ 0.300467] msm_pcie_enable: msm_pcie_enable: PCIe: Release the reset of endpoint of RC0.
  208. [ 0.440571] msm_pcie_enable: msm_pcie_enable: PCIe RC0 link initialized
  209. [ 0.440963] PCI host bridge to bus 0000:00
  210. [ 0.440990] pci_bus 0000:00: root bus resource [io 0x40200000-0x402fffff]
  211. [ 0.441006] pci_bus 0000:00: root bus resource [mem 0x40300000-0x40ffffff]
  212. [ 0.441021] pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff]
  213. [ 0.441102] msm_pcie_oper_conf: msm_pcie_oper_conf: Read of RC0 0:0x00 + 0x0014[4] is all FFs
  214. [ 0.441696] PCI: bus0: Fast back to back transfers disabled
  215. [ 0.441717] pci 0000:00:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring
  216. [ 0.442150] msm_pcie_oper_conf: msm_pcie_oper_conf: Read of RC0 1:0x00 + 0x0014[4] is all FFs
  217. [ 0.442889] PCI: bus1: Fast back to back transfers disabled
  218. [ 0.442984] msm_pcie_oper_conf: msm_pcie_oper_conf: Read of RC0 0:0x00 + 0x0028[4] is all FFs
  219. [ 0.443018] pci 0000:00:00.0: BAR 8: assigned [mem 0x40400000-0x405fffff]
  220. [ 0.443037] pci 0000:00:00.0: BAR 9: assigned [mem 0x40300000-0x403fffff pref]
  221. [ 0.443054] pci 0000:00:00.0: BAR 0: assigned [mem 0x40600000-0x40600fff 64bit]
  222. [ 0.443085] pci 0000:01:00.0: BAR 0: assigned [mem 0x40400000-0x405fffff 64bit]
  223. [ 0.443126] pci 0000:01:00.0: BAR 6: assigned [mem 0x40300000-0x4030ffff pref]
  224. [ 0.443141] pci 0000:00:00.0: PCI bridge to [bus 01]
  225. [ 0.443162] pci 0000:00:00.0: bridge window [mem 0x40400000-0x405fffff]
  226. [ 0.443181] pci 0000:00:00.0: bridge window [mem 0x40300000-0x403fffff pref]
  227. [ 0.443201] msm_pcie_probe: msm_pcie_probe: RC0 is enabled in bootup
  228. [ 0.443556] Switched to clocksource arch_sys_counter
  229. [ 0.447673] NET: Registered protocol family 2
  230. [ 0.448750] TCP established hash table entries: 2048 (order: 1, 8192 bytes)
  231. [ 0.448798] TCP bind hash table entries: 2048 (order: 2, 16384 bytes)
  232. [ 0.448848] TCP: Hash tables configured (established 2048 bind 2048)
  233. [ 0.448908] TCP: reno registered
  234. [ 0.448925] UDP hash table entries: 256 (order: 1, 8192 bytes)
  235. [ 0.448956] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
  236. [ 0.449297] NET: Registered protocol family 1
  237. [ 0.450189] Unpacking initramfs...
  238. [ 5.845877] Freeing initrd memory: 8012K (c2200000 - c29d3000)
  239. [ 5.897023] futex hash table entries: 1024 (order: 4, 65536 bytes)
  240. [ 6.183119] squashfs: version 4.0 (2009/01/31) Phillip Lougher
  241. [ 6.183179] msgmni has been set to 472
  242. [ 6.197518] io scheduler noop registered
  243. [ 6.197536] io scheduler deadline registered (default)
  244. [ 6.211360] tcsr 194b000.tcsr: setting usb hs phy mode select = e700e7
  245. [ 6.211431] tcsr 1953000.ess_tcsr: setting ess interface select = 1
  246. [ 6.211517] tcsr 1949000.tcsr: setting wifi_glb_cfg = 41000000
  247. [ 6.211576] tcsr 1957000.tcsr: setting wifi_noc_memtype_m0_m2 = 2222222
  248. [ 6.243631] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled
  249. [ 6.270909] msm_serial_hsl_probe: detected port #0 (ttyMSM0)
  250. [ 6.270953] msm_serial_hsl_probe: Bus scaling is disabled
  251. [ 6.271130] 78af000.serial: ttyMSM0 at MMIO 0x78af000 (irq = 139, base_baud = 115200) is a MSM
  252. [ 6.271205] msm_hsl_console_setup: console setup on port #0
  253. [ 7.016337] console [ttyMSM0] enabled
  254. [ 7.020878] msm_serial_hsl_probe: detected port #1 (ttyMSM1)
  255. [ 7.028572] msm_serial_hsl_probe: Bus scaling is disabled
  256. [ 7.033108] 78b0000.serial: ttyMSM1 at MMIO 0x78b0000 (irq = 140, base_baud = 115200) is a MSM
  257. [ 7.048917] msm_serial_hsl_init: driver initialized
  258. [ 7.056591] msm_serial_hs module loaded
  259. [ 7.073753] Trying to register dev faulty etc
  260. [ 7.082247] at24 0-0050: 8192 byte 24c64 EEPROM, writable, 32 bytes/write
  261. [ 7.127271] sps: BAM device 0x07984000 is not registered yet.
  262. [ 7.131995] sps:BAM 0x07984000 is registered.
  263. [ 7.148455] msm_nand_bam_init: msm_nand_bam_init: BAM device registered: bam_handle 0xcf091a00
  264. [ 7.156514] sps:BAM 0x07984000 (va:0xd0260000) enabled: ver:0x19, number of pipes:7
  265. [ 7.164121] msm_nand_version_check: nand_major:1, nand_minor:4, qpic_major:1, qpic_minor:4
  266. [ 7.172110] msm_nand_scan: missing page size info - extract from NAND ID
  267. [ 7.178889] msm_nand_scan: NAND Id: 0x1d80f101 Buswidth: 8Bits Density: 128 MByte
  268. [ 7.186277] msm_nand_scan: pagesize: 2048 Erasesize: 131072 oobsize: 64 (in Bytes)
  269. [ 7.193822] msm_nand_scan: BCH ECC: 4 Bit
  270. [ 7.197790] msm_nand_scan: CFG0: 0x2a0408c0, CFG1: 0x0804745c
  271. [ 7.197790] RAWCFG0: 0x280420c0, RAWCFG1: 0x0005045d
  272. [ 7.197790] ECCBUFCFG: 0x00000203, ECCBCHCFG: 0x42040700
  273. [ 7.197790] BAD BLOCK BYTE: 0x000001d1
  274. [ 7.220534] 12 ofpart partitions found on MTD device 7980000.qcom,nand
  275. [ 7.226966] Creating 12 MTD partitions on "7980000.qcom,nand":
  276. [ 7.232770] 0x000000000000-0x000000100000 : "sbl1"
  277. [ 7.252763] 0x000000100000-0x000000200000 : "mibib"
  278. [ 7.284008] 0x000000200000-0x000000300000 : "bootconfig"
  279. [ 7.312321] 0x000000300000-0x000000400000 : "qsee"
  280. [ 7.346659] 0x000000400000-0x000000500000 : "qsee_alt"
  281. [ 7.377204] 0x000000500000-0x000000580000 : "cdt"
  282. [ 7.407300] 0x000000580000-0x000000600000 : "cdt_alt"
  283. [ 7.439643] 0x000000600000-0x000000680000 : "ddrparams"
  284. [ 7.470840] 0x000000700000-0x000000900000 : "u-boot"
  285. [ 7.503159] 0x000000900000-0x000000b00000 : "u-boot-backup"
  286. [ 7.535985] 0x000000b00000-0x000000b80000 : "ART"
  287. [ 7.564250] 0x000000c00000-0x000007c00000 : "ubi"
  288. [ 7.677189] msm_nand_probe: NANDc phys addr 0x7980000, BAM phys addr 0x7984000, BAM IRQ 133
  289. [ 7.696572] msm_nand_probe: Allocated DMA buffer at virt_addr 0xd023c000, phys_addr 0x8f100000
  290. [ 7.716968] libphy: ipq40xx_mdio: probed
  291. [ 7.735029] ipq40xx-mdio 90000.mdio: ipq40xx-mdio driver was registered
  292. [ 7.754607] input: gpio_keys.7 as /devices/soc.0/gpio_keys.7/input/input0
  293. [ 7.770155] i2c /dev entries driver
  294. [ 7.807443] qcom_wdt b017000.watchdog: boot reason:0
  295. [ 7.832435] Bluetooth: HCI UART driver ver 2.2
  296. [ 7.841914] Bluetooth: HCI H4 protocol initialized
  297. [ 7.877100] lp5562 1-0030: internal clock used
  298. [ 7.948321] meraki-config board-data.9: Meraki config device loaded
  299. [ 7.963513] TCP: cubic registered
  300. [ 7.971673] NET: Registered protocol family 17
  301. [ 7.978433] Registering SWP/SWPB emulation handler
  302. [ 7.996981] SD0 VccQ: disabling
  303. [ 7.999094] regulator-dummy: disabling
  304. [ 8.019042] UBI: attaching mtd11 to ubi0
  305. [ 8.515759] UBI: scanning is finished
  306. [ 8.570140] UBI: attached mtd11 (name "ubi", size 112 MiB) to ubi0
  307. [ 8.582522] UBI: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
  308. [ 8.588473] UBI: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
  309. [ 8.595008] UBI: VID header offset: 2048 (aligned 2048), data offset: 4096
  310. [ 8.601819] UBI: good PEBs: 896, bad PEBs: 0, corrupted PEBs: 0
  311. [ 8.607834] UBI: user volume: 6, internal volumes: 1, max. volumes count: 128
  312. [ 8.614880] UBI: max/mean erase counter: 3/1, WL threshold: 4096, image sequence number: 2086049366
  313. [ 8.623907] UBI: available PEBs: 432, total reserved PEBs: 464, PEBs reserved for bad PEB handling: 20
  314. [ 8.633170] UBI: background thread "ubi_bgt0d" started, PID 690
  315. [ 8.793136] /mnt/jenkins/workspace/router/prod-signing/router-25-4/linux-3.14/drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
  316. [ 8.819995] clk: Not disabling unused clocks
  317. [ 8.823414] devtmpfs: mounted
  318. [ 8.829561] Freeing unused kernel memory: 148K (c0670000 - c0695000)
  319.  
  320. init started: BusyBox v1.24.1 (2018-09-28 16:54:42 PDT)
  321. [ 9.310144] mknod: /dev/mtdchar/ART: File exists
  322. [ 9.320945] mknod: /dev/mtdblock/ART: File exists
  323. [ 9.353775] UBIFS: background thread "ubifs_bgt0_1" started, PID 890
  324. [ 9.388004] UBIFS: recovery needed
  325. [ 9.486520] UBIFS: recovery completed
  326. [ 9.489254] UBIFS: mounted UBI device 0, volume 1, name "storage"
  327. [ 9.495259] UBIFS: LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
  328. [ 9.504363] UBIFS: FS size: 15618048 bytes (14 MiB, 123 LEBs), journal size 1015809 bytes (0 MiB, 6 LEBs)
  329. [ 9.513905] UBIFS: reserved for root: 737678 bytes (720 KiB)
  330. [ 9.519540] UBIFS: media format: w4/r0 (latest is w4/r0), UUID 5C5CAD7D-D1C4-4900-9412-7721F5096DED, small LPT model
  331. [ 9.549112] random: serial_loginche: uninitialized urandom read (4 bytes read, 0 bits of entropy available)
  332. [ 9.591998] random: reset_switch: uninitialized urandom read (4 bytes read, 0 bits of entropy available)
  333. [ 9.625509] sps: BAM device 0x07884000 is not registered yet.
  334. [ 9.630250] sps:BAM 0x07884000 is registered.
  335. [ 9.643744] sps:BAM 0x07884000 (va:0xd0a00000) enabled: ver:0x19, number of pipes:12
  336. WARNING! THIS CONSOLE IS LOGGED! UNAUTHORIZED ACCESS FORBIDDEN!
  337. [ 9.676869] Ignoring manufacturing reset button check: Not in RMA or MFG mode
  338. <Meraki> [ 9.764952] Sat Jan 1 00:00:00 UTC 2000
  339. [ 9.877223] random: board_data_conf: uninitialized urandom read (4 bytes read, 0 bits of entropy available)
  340. [ 9.918222] Quick boot reason lookup:
  341. [ 9.939132] No valid safe config available or fallback disabled, remove unsafe config
  342. [ 9.978194] sysctl: error: 'vm.extfrag_threshold' is an unknown key
  343. [ 10.122950] 377+0 records in
  344. [ 10.124804] 377+0 records out
  345. [ 10.127953] 12064 bytes (11.8KB) copied, 0.094424 seconds, 124.8KB/s
  346. [ 10.228444] 377+0 records in
  347. [ 10.230297] 377+0 records out
  348. [ 10.233441] 12064 bytes (11.8KB) copied, 0.088313 seconds, 133.4KB/s
  349. [ 10.339304] 377+0 records in
  350. [ 10.341157] 377+0 records out
  351. [ 10.344365] 12064 bytes (11.8KB) copied, 0.093722 seconds, 125.7KB/s
  352. [ 10.366978] QCE50: __qce_init_clk: Unable to get CE core src clk, set to NULL
  353. [ 10.373163] qcrypto 8e20000.qcrypto: Qualcomm Crypto 5.3.1 device found @0x8e20000
  354. [ 10.393146] qcrypto 8e20000.qcrypto: CE device = 0x0
  355. [ 10.393146] , IO base, CE = 0xd1fc0000
  356. [ 10.393146] , Consumer (IN) PIPE 2, Producer (OUT) PIPE 3
  357. [ 10.393146] IO base BAM = 0x (null)
  358. [ 10.393146] BAM IRQ 239
  359. [ 10.393146] Engines Availability = 0x2010453
  360. [ 10.416853] sps:BAM 0x08e04000 is registered.
  361. [ 10.421888] sps:BAM 0x08e04000 (va:0xd2000000) enabled: ver:0x27, number of pipes:4
  362. [ 10.429723] QCE50: qce_sps_init: Qualcomm MSM CE-BAM at 0x0000000008e04000 irq 239
  363. [ 10.436758] bus_scale_table is NULL
  364. [ 10.439963] qcrypto 8e20000.qcrypto: qcrypto-ecb-aes
  365. [ 10.444950] qcrypto 8e20000.qcrypto: qcrypto-cbc-aes
  366. [ 10.449828] qcrypto 8e20000.qcrypto: qcrypto-ctr-aes
  367. [ 10.454799] qcrypto 8e20000.qcrypto: qcrypto-rfc3686-ctr-aes
  368. [ 10.460415] qcrypto 8e20000.qcrypto: qcrypto-ecb-des
  369. [ 10.465388] qcrypto 8e20000.qcrypto: qcrypto-cbc-des
  370. [ 10.470312] qcrypto 8e20000.qcrypto: qcrypto-ecb-3des
  371. [ 10.475380] qcrypto 8e20000.qcrypto: qcrypto-cbc-3des
  372. [ 10.480380] qcrypto 8e20000.qcrypto: qcrypto-xts-aes
  373. [ 10.485365] qcrypto 8e20000.qcrypto: qcrypto-sha1
  374. [ 10.490014] qcrypto 8e20000.qcrypto: qcrypto-sha256
  375. [ 10.494907] qcrypto 8e20000.qcrypto: qcrypto-aead-hmac-sha1-cbc-aes
  376. [ 10.501126] qcrypto 8e20000.qcrypto: qcrypto-aead-hmac-sha1-cbc-des
  377. [ 10.507403] qcrypto 8e20000.qcrypto: qcrypto-aead-hmac-sha1-cbc-3des
  378. [ 10.513760] qcrypto 8e20000.qcrypto: qcrypto-aead-hmac-sha256-cbc-aes
  379. [ 10.520135] qcrypto 8e20000.qcrypto: qcrypto-aead-hmac-sha256-cbc-des
  380. [ 10.526588] qcrypto 8e20000.qcrypto: qcrypto-aead-hmac-sha256-cbc-3des
  381. [ 10.533072] qcrypto 8e20000.qcrypto: qcrypto-aes-ccm
  382. [ 10.538076] qcrypto 8e20000.qcrypto: qcrypto-rfc4309-aes-ccm
  383. [ 10.543621] qcrypto: FIPS140-2 Known Answer Tests: Skipped
  384. [ 10.619060] edma module_init
  385. [ 10.743917] reset ok in probe!
  386. [ 10.745988] EDMA using MAC@ - using b6:5b:37:c7:eb:7c
  387. [ 11.001948] random: board_data_conf: uninitialized urandom read (4 bytes read, 0 bits of entropy available)
  388. [ 11.046447] random: ccloader: uninitialized urandom read (4 bytes read, 0 bits of entropy available)
  389. [ 11.280121] autobaud successful
  390. [ 11.283708] dummy cmd result: 0x41
  391. [ 11.286645] Chip id: 80 00 f0 00
  392. [ 11.289375] test successful
  393. [ 11.354255] CRC32: a3 64 a0 a7
  394. [ 11.360272] file CRC32: a364a0a7
  395. [ 11.368076] firmware load successful
  396. [ 11.407112] random: swctl: uninitialized urandom read (4 bytes read, 1 bits of entropy available)
  397. [ 11.452766] random: board_data_conf: uninitialized urandom read (4 bytes read, 1 bits of entropy available)
  398. [ 11.500282] random: swctl: uninitialized urandom read (4 bytes read, 1 bits of entropy available)
  399. [ 11.519794] random: swctl: uninitialized urandom read (4 bytes read, 1 bits of entropy available)
  400. [ 11.565803] random: swctl: uninitialized urandom read (4 bytes read, 1 bits of entropy available)
  401. [ 11.834965] sysctl -w vm.panic_on_oom=2
  402. [ 11.844591] vm.panic_on_oom = 2
  403. [ 12.029011] click: starting router thread pid 1187 (cf33f500)
  404. [ 12.127390] elts_meraki: module license 'unspecified' taints kernel.
  405. [ 12.132718] Disabling lock debugging due to kernel taint
  406. [ 12.341878] Single synchronous check for reset
  407. [ 12.520959]
  408. [ 12.531825] boot 22 build 25-201809281433-G5614545c-rel-lawn board insect mac E0:CB:BC:96:6F:B9
  409. [ 12.547725] Module: qcrypto .text=0xbf000000 .data=0xbf006b08 .bss=0xbf007f68
  410. [ 12.547725] Module: essedma .text=0xbf011000 .data=0xbf018148 .bss=0xbf018610
  411. [ 12.547725] Module: dummy .text=0xbf020000 .data=0xbf020434 .bss=
  412. [ 12.547725] Module: proclikefs .text=0xbf024000 .data= .bss=0xbf024b00
  413. [ 12.547725] Module: merakiclick .text=0xbf029000 .data=0xbf11fb48 .bss=0xbf11fdc0
  414. [ 12.547725] Module: elts_meraki .text=0xbf225000 .data=0xbf48310c .bss=0xbf484778
  415. [ 12.547725] Module: reed_solomon .text=0xbf628000 .data=0xbf629358 .bss=
  416. [ 12.637317] ramoops: using module parameters
  417. [ 12.644634] pstore: Registered ramoops as persistent store backend
  418. [ 12.649790] ramoops: attached 0x100000@0x8ff00000, ecc: 0/0
  419. [ 12.679172] ls -1 /sys/fs/pstore/dmesg-ramoops-* 2>/dev/null
  420. [ 12.704837] /usr/bin/check_bootreason: reading file : No such file or directory
  421. [ 14.045355] ath_spectral: Version 2.0.0
  422. [ 14.045355] Copyright (c) 2005-2009 Atheros Communications, Inc. All Rights Reserved
  423. [ 14.078624] ath_hal: 0.9.17.1 (AR9380, WRITE_EEPROM, TX_DATA_SWAP, RX_DATA_SWAP, 11D)
  424. [ 14.106487] ath_dfs: Version 2.0.0
  425. [ 14.106487] Copyright (c) 2005-2006 Atheros Communications, Inc. All Rights Reserved
  426. [ 14.170108] ol_ath_ahb_probe
  427. [ 14.172123] ol_ath_ahb_probe: io resource start: 0xa000000, mem=0xd3000000
  428. [ 14.185910] *********** Dakota *************
  429. [ 14.189252] __ol_ath_attach: Creating netdev wifi0
  430. [ 14.200842]
  431. [ 14.200842] __ol_ath_attach() Allocated scn cd2804c0
  432. [ 14.206848] ol_ath_ahb_configure: MSI addr: 0b006040, MSI base: 00000040
  433. [ 14.213200] ath10k_ahb a000000.wifi: ath DEBUG: sc=0xcf38f800
  434. [ 14.219301]
  435. [ 14.219301] ol_ath_ahb_configure : num_desired MSI set to 0
  436. [ 14.226252]
  437. [ 14.226252] Using Legacy Interrupt
  438. [ 14.230735]
  439. [ 14.230735] Waiting for target init
  440. [ 14.236478]
  441. [ 14.236478] Done waiting
  442. [ 14.242741]
  443. [ 14.242741] CLOCK PLL skipped
  444. [ 14.248255] __ol_ath_attach: dev name wifi0
  445. [ 14.251409] ol_ath_attach interface_id 0
  446. [ 14.255972] ol_target_init() BMI inited.
  447. [ 14.259456] ol_target_init() BMI Get Target Info.
  448. [ 14.264352] Chip id: 0xb, chip version: 0x1000000
  449. [ 14.268590]
  450. [ 14.268590] CE WAR Disabled
  451. [ 14.273277] NUM_DEV=1 FWMODE=0x2 FWSUBMODE=0x0 FWBR_BUF 0
  452. [ 14.279661] ol_target_init() configure Target .
  453. [ 14.283325]
  454. [ 14.283325] Target Version is 1000000
  455. [ 14.288948]
  456. [ 14.288948] Flash Download Address c0000
  457. [ 14.294426] ol_transfer_bin_file: flash data file defined
  458. [ 14.299392] ol_transfer_bin_file[3752] Get Caldata for wifi0.
  459. [ 14.305556] __adf_os_fs_read[42], Open File /tmp/wifi0.caldata SUCCESS!!
  460. [ 14.311801] file system magic:16914836
  461. [ 14.316046] super blocksize:4096
  462. [ 14.318919] inode 1696
  463. [ 14.321349] file size:12064
  464. [ 14.324811] ol_transfer_bin_file 3813: Download Flash data len 12064
  465. [ 14.330985] Board extended Data download address: 0x0
  466. [ 14.355733]
  467. [ 14.355733] Board data initialized
  468. [ 14.359833] ol_ath_download_firmware: Download OTP, flash download ADDRESS 0xc0000
  469. [ 14.367806]
  470. [ 14.367806] Selecting OTP binary for CHIP Version 0
  471. [ 14.374298] ol_transfer_bin_file 3623: downloading file 0, Download data len 4424
  472. [ 14.396970]
  473. [ 14.396970] First OTP send param 8000
  474. [ 14.405960] ol_ath_download_firmware :First OTP download and Execute is good address:0x5000 return param 4660
  475. [ 14.415127] ol_ath_download_firmware:##Board Id 20 , CHIP Id 0
  476. [ 14.420835] ol_ath_download_firmware: BOARDDATA DOWNLOAD TO address 0xc0000
  477. [ 14.428018]
  478. [ 14.428018] wifi0: Selecting board data file name boardData_1_0_IPQ4019_DK04_2G.bin
  479. [ 14.437239] ol_transfer_bin_file: Board Data File download to address=0xc0000 file name=IPQ4019/hw.1/mr33/boardData_1_0_IPQ4019_DK04_2G.bin
  480. [ 14.449693] ol_transfer_bin_file 3623: downloading file 3, Download data len 12064
  481. [ 14.457576] Board extended Data download address: 0x0
  482. [ 14.481794] ol_ath_download_firmware: Using 0x1234 for the remainder of init
  483. [ 14.488073]
  484. [ 14.488073] Selecting OTP binary for CHIP Version 0
  485. [ 14.494862] ol_transfer_bin_file 3623: downloading file 0, Download data len 4424
  486. [ 14.517560]
  487. [ 14.517560] [Flash] : Ignore Module param
  488. [ 14.522100]
  489. [ 14.522100] Second otp download Param 10000
  490. [ 14.538968] ol_ath_download_firmware : Second OTP download and Execute is good, param=0x0
  491. [ 14.546457]
  492. [ 14.546457] Mission mode: Firmware CHIP Version 0
  493. [ 14.553155] ol_swap_seg_alloc: Successfully allocated memory for SWAP size=262144
  494. [ 14.561428] Swap: bytes_left to copy: fw:16; dma_page:109113
  495. [ 14.566498] Swap: wrong length read:0
  496. [ 14.569709] ol_swap_wlan_memory_expansion: Swap total_bytes copied: 153031 Target address 4172c0
  497. [ 14.579287] scn=cd2804c0 target_write_addr=4172c0 seg_info=cdc08210
  498. [ 14.585278] ol_transfer_swap_struct:Code swap structure successfully downloaded for bin type =2
  499. [ 14.594025] bin_filename=IPQ4019/hw.1/athwlan.bin swap_filename=/lib/firmware/IPQ4019/hw.1/athwlan.codeswap.bin
  500. [ 14.604192] ol_transfer_bin_file: Downloading firmware file: IPQ4019/hw.1/athwlan.bin
  501. [ 14.612666] ol_transfer_bin_file 3623: downloading file 1, Download data len 364120
  502. [ 15.837144] ol_target_init() Download FW done.
  503. [ 15.840722] ol_ath_attach() WMI attached. wmi_handle cdca0000
  504. [ 15.847128] htc_wmi_init() HT Create . cf235000
  505. [ 15.850977] htc_wmi_init() HIF Claim.
  506. [ 15.855288] htc_wmi_init 7732 host_enable 0 nss_nwifi_offload 0
  507. [ 15.860525] ol_ath_set_default_tgt_config : AC Minfree buffer allocation through module param (umac.ko)
  508. [ 15.870330] OL_ACBKMinfree : 0
  509. [ 15.873024] OL_ACBEMinfree : 0
  510. [ 15.876566] OL_ACVIMinfree : 0
  511. [ 15.879272] OL_ACVOMinfree : 0
  512. [ 15.887114] CE_recv_buf_enqueue 877 Populate last entry 512 for CE 5
  513. [ 15.892442] CE_recv_buf_enqueue 886 CE 5 wi 511 dest_ptr 0x8da2b100 nbytes 0 recv_ctxt 0xcda12000
  514. [ 15.903956] Startup Mode-0 set
  515. [ 15.905984]
  516. [ 15.905984] <=== cfg max peer id 1056 ====>
  517. [ 15.912021] HTC Service:0x0300 ep:1 TX flow control disabled
  518. [ 15.918429] htt_peer_map_timer_init Enter pdev cda1c000 hrtimer cda1e520
  519. [ 15.924478]
  520. [ 15.924478] htt_alloc_peer_map_mem : Alloc Success : host q vaddr cf1f7000 paddr 8f1f7000
  521. [ 15.934259]
  522. [ 15.934259] htt_alloc_peer_map_mem : Flush Interval Configured to 256 pkts
  523. [ 15.945342] CE_pkt_dl_len_set CE 4 Pkt download length 64
  524. [ 15.949862] ol_txrx_pdev_attach: 2500 tx desc's allocated ; range starts from ccee0000
  525. [ 15.959294] HTC Service:0x0100 ep:2 TX flow control disabled
  526. [ 15.965518] wmi_service_ready_event_rx: WMI UNIFIED SERVICE READY event
  527. [ 15.971346] Firmware_Build_Number:92
  528. [ 15.975488] num_rf_chain:0x00000002 ht_cap_info:0x0000085b vht_cap_info:0x339959b2 vht_supp_mcs:0x0000fffa
  529. [ 15.985111]
  530. [ 15.985111] RES CFG Support wmi_service_bitmap 9778
  531. [ 15.991348]
  532. Sending Ext resource cfg: HOST PLATFORM as 0 and fw_feature_bitmap as 50 to TGT
  533. [ 16.000429] ol_ath_service_ready_event: tt_support: 1
  534. [ 16.005598] ol_ath_service_ready_event: periodic_chan_stats: 1
  535. [ 16.010868] ol_ath_service_ready_event: sw_cal_support_check_flag: 1
  536. [ 16.017594] Peer Caching Enabled ; num_peers = 257, num_active_peers = 52 num_tids = 104, num_vdevs = 17
  537. [ 16.027066] Mesh Supported
  538. [ 16.029369] idx 1 req 2 num_units 1 num_unit_info 12 unit size 256 actual units 53
  539. [ 16.037524] ol_ath_alloc_host_mem_chunk req_id 2 idx 0 num_units 53 unit_len 256,
  540. [ 16.044829] idx 2 req 3 num_units 1 num_unit_info 12 unit size 1024 actual units 53
  541. [ 16.052423] ol_ath_alloc_host_mem_chunk req_id 3 idx 1 num_units 53 unit_len 1024,
  542. [ 16.060331] idx 3 req 4 num_units 1 num_unit_info 12 unit size 4096 actual units 53
  543. [ 16.068141] ol_ath_alloc_host_mem_chunk req_id 4 idx 2 num_units 53 unit_len 4096,
  544. [ 16.075537] idx 0 req 1 num_units 0 num_unit_info 2 unit size 744 actual units 258
  545. [ 16.083160] ol_ath_alloc_host_mem_chunk req_id 1 idx 3 num_units 258 unit_len 744,
  546. [ 16.090956] idx 4 req 6 num_units 35 num_unit_info 0 unit size 3072 actual units 35
  547. [ 16.098797] ol_ath_alloc_host_mem_chunk req_id 6 idx 4 num_units 35 unit_len 3072,
  548. [ 16.106247] idx 5 req 7 num_units 1 num_unit_info 0 unit size 6144 actual units 1
  549. [ 16.113916] ol_ath_alloc_host_mem_chunk req_id 7 idx 5 num_units 1 unit_len 6144,
  550. [ 16.121031] idx 6 req 5 num_units 0 num_unit_info 2 unit size 2044 actual units 258
  551. [ 16.129424] ol_ath_alloc_host_mem_chunk req_id 5 idx 6 num_units 86 unit_len 2044,
  552. [ 16.136819] ol_ath_alloc_host_mem_chunk req_id 5 idx 7 num_units 86 unit_len 2044,
  553. [ 16.144342] ol_ath_alloc_host_mem_chunk req_id 5 idx 8 num_units 86 unit_len 2044,
  554. [ 16.151496] chunk 0 len 13568 requested ,ptr 0x8ce8c000
  555. [ 16.157267] chunk 1 len 54272 requested ,ptr 0x8cf50000
  556. [ 16.162258] chunk 2 len 217088 requested ,ptr 0x8cf80000
  557. [ 16.168103] chunk 3 len 191952 requested ,ptr 0x8cfc0000
  558. [ 16.173195] chunk 4 len 107520 requested ,ptr 0x8cf60000
  559. [ 16.179028] chunk 5 len 6144 requested ,ptr 0x8cf48000
  560. [ 16.184179] chunk 6 len 175784 requested ,ptr 0x8d400000
  561. [ 16.189427] chunk 7 len 175784 requested ,ptr 0x8d440000
  562. [ 16.195255] chunk 8 len 175784 requested ,ptr 0x8d480000
  563. [ 16.200511] ol_ath_service_ready_event[4067] WAPI MBSSID 2
  564. [ 16.241519] wmi_ready_event_rx: WMI UNIFIED READY event
  565. [ 16.246084] ol_ath_connect_htc() WMI is ready
  566. [ 16.250528] htt_h2t_frag_desc_bank_cfg_msg - HTT_H2T_MSG_TYPE_FRAG_DESC_BANK_CFG sent to FW for radio ID = 0
  567. [ 16.265554] ol_ath_attach() connect HTC.
  568. [ 16.268547] target uses HTT version 2.2; host uses 2.2
  569. [ 16.274076] bypasswmi : 0
  570. [ 16.276271] ol_regdmn_start: reg-domain param: regdmn=0, countryName=, wModeSelect=FFFFFFFF, netBand=FFFFFFFF, extendedChanMode=0.
  571. [ 16.289003] acfg_attach: 2892: Netlink socket created:cdd9d000
  572. [ 16.294296] SPECTRAL : get_capability not registered
  573. [ 16.298756] HAL_CAP_PHYDIAG : Capable
  574. [ 16.302399] SPECTRAL : Need to fix the capablity check for RADAR (spectral_attach : 237)
  575. [ 16.311210] SPECTRAL : get_capability not registered
  576. [ 16.315679] HAL_CAP_RADAR : Capable
  577. [ 16.319070] SPECTRAL : Need to fix the capablity check for SPECTRAL
  578. [ 16.319070] (spectral_attach : 242)
  579. [ 16.329409] SPECTRAL : get_capability not registered
  580. [ 16.334054] HAL_CAP_SPECTRAL_SCAN : Capable
  581. [ 16.337993] SPECTRAL : get_tsf64 not registered
  582. [ 16.342515] spectral_init_netlink 78 NULL SKB
  583. [ 16.347383] Green-AP : Green-AP : Attached
  584. [ 16.347383]
  585. [ 16.352400] Green-AP : Attached
  586. [ 16.356027] rate power table override is only supported for AR98XX
  587. [ 16.362346] ol_if_dfs_attach: called; ptr=cd4c1984, radar_info=cd2e1c48
  588. [ 16.368870] dfs_attach: event log enabled by default
  589. [ 16.374920] ipq4019_wifi_led_init: Wifi LED init failed.. Couldn't get led gpio/led source
  590.  
  591. [ 16.382245] ol_ath_attach() UMAC attach .
  592. [ 16.387033]
  593. [ 16.387033] BURSTING enabled by default
  594. [ 16.392477] ACS not enabled
  595. [ 16.395137] __ol_ath_attach: needed_headroom reservation 60
  596. [ 16.408443] ol_ath_thermal_mitigation_attach: --
  597. [ 16.421023] ol_ath_ahb_probe
  598. [ 16.422963] ol_ath_ahb_probe: io resource start: 0xa800000, mem=0xd3400000
  599. [ 16.454166] *********** Dakota *************
  600. [ 16.457519] __ol_ath_attach: Creating netdev wifi1
  601. [ 16.462569]
  602. [ 16.462569] __ol_ath_attach() Allocated scn cd5804c0
  603. [ 16.469661] ol_ath_ahb_configure: MSI addr: 0b006040, MSI base: 00000050
  604. [ 16.475931] ath10k_ahb a800000.wifi: ath DEBUG: sc=0xcdd9e800
  605. [ 16.481122]
  606. [ 16.481122] ol_ath_ahb_configure : num_desired MSI set to 0
  607. [ 16.488984]
  608. [ 16.488984] Using Legacy Interrupt
  609. [ 16.493184]
  610. [ 16.493184] Waiting for target init
  611. [ 16.498953]
  612. [ 16.498953] Done waiting
  613. [ 16.508233]
  614. [ 16.508233] CLOCK PLL skipped
  615. [ 16.512918] __ol_ath_attach: dev name wifi1
  616. [ 16.516665] ol_ath_attach interface_id 1
  617. [ 16.520159] ol_target_init() BMI inited.
  618. [ 16.524558] ol_target_init() BMI Get Target Info.
  619. [ 16.528572] Chip id: 0xb, chip version: 0x1000000
  620. [ 16.533256]
  621. [ 16.533256] CE WAR Disabled
  622. [ 16.538638] NUM_DEV=1 FWMODE=0x2 FWSUBMODE=0x0 FWBR_BUF 0
  623. [ 16.543920] ol_target_init() configure Target .
  624. [ 16.547702]
  625. [ 16.547702] Target Version is 1000000
  626. [ 16.552730]
  627. [ 16.552730] Flash Download Address c0000
  628. [ 16.559192] ol_transfer_bin_file: flash data file defined
  629. [ 16.564016] ol_transfer_bin_file[3752] Get Caldata for wifi1.
  630. [ 16.569519] __adf_os_fs_read[42], Open File /tmp/wifi1.caldata SUCCESS!!
  631. [ 16.576583] file system magic:16914836
  632. [ 16.579987] super blocksize:4096
  633. [ 16.583286] inode 1697
  634. [ 16.586275] file size:12064
  635. [ 16.588655] ol_transfer_bin_file 3813: Download Flash data len 12064
  636. [ 16.595771] Board extended Data download address: 0x0
  637. [ 16.619691]
  638. [ 16.619691] Board data initialized
  639. [ 16.624225] ol_ath_download_firmware: Download OTP, flash download ADDRESS 0xc0000
  640. [ 16.631185]
  641. [ 16.631185] Selecting OTP binary for CHIP Version 0
  642. [ 16.638375] ol_transfer_bin_file 3623: downloading file 0, Download data len 4424
  643. [ 16.661223]
  644. [ 16.661223] First OTP send param 8000
  645. [ 16.670661] ol_ath_download_firmware :First OTP download and Execute is good address:0x5400 return param 4660
  646. [ 16.679812] ol_ath_download_firmware:##Board Id 21 , CHIP Id 0
  647. [ 16.685817] ol_ath_download_firmware: BOARDDATA DOWNLOAD TO address 0xc0000
  648. [ 16.692313]
  649. [ 16.692313] wifi1: Selecting board data file name boardData_1_0_IPQ4019_DK04_5G.bin
  650. [ 16.702104] ol_transfer_bin_file: Board Data File download to address=0xc0000 file name=IPQ4019/hw.1/mr33/boardData_1_0_IPQ4019_DK04_5G.bin
  651. [ 16.714422] ol_transfer_bin_file 3623: downloading file 3, Download data len 12064
  652. [ 16.721985] Board extended Data download address: 0x0
  653. [ 16.746883] ol_ath_download_firmware: Using 0x1234 for the remainder of init
  654. [ 16.752904]
  655. [ 16.752904] Selecting OTP binary for CHIP Version 0
  656. [ 16.760132] ol_transfer_bin_file 3623: downloading file 0, Download data len 4424
  657. [ 16.782985]
  658. [ 16.782985] [Flash] : Ignore Module param
  659. [ 16.788035]
  660. [ 16.788035] Second otp download Param 10000
  661. [ 16.803986] ol_ath_download_firmware : Second OTP download and Execute is good, param=0x0
  662. [ 16.811222]
  663. [ 16.811222] Mission mode: Firmware CHIP Version 0
  664. [ 16.818714] ol_swap_seg_alloc: Successfully allocated memory for SWAP size=262144
  665. [ 16.826236] Swap: bytes_left to copy: fw:16; dma_page:109113
  666. [ 16.830916] Swap: wrong length read:0
  667. [ 16.835126] ol_swap_wlan_memory_expansion: Swap total_bytes copied: 153031 Target address 4172c0
  668. [ 16.843978] scn=cd5804c0 target_write_addr=4172c0 seg_info=cd47d510
  669. [ 16.849830] ol_transfer_swap_struct:Code swap structure successfully downloaded for bin type =2
  670. [ 16.859117] bin_filename=IPQ4019/hw.1/athwlan.bin swap_filename=/lib/firmware/IPQ4019/hw.1/athwlan.codeswap.bin
  671. [ 16.869105] [wifi0] FWLOG: [28776] WAL_DBGID_TX_AC_BUFFER_SET (
  672. [ 16.874641] ol_transfer_bin_file: Downloading firmware file: IPQ4019/hw.1/athwlan.bin
  673. [ 16.883486] ol_transfer_bin_file 3623: downloading file 1, Download data len 364120
  674. [ 16.890956] 0x3, 0x1e, 0x94c, 0x94c, 0x0 )
  675. [ 16.894263] [wifi0] FWLOG: [28776] WAL_DBGID_TX_AC_BUFFER_SET ( 0x12, 0x1e, 0x94c, 0x94c, 0x0 )
  676. [ 16.902938] [wifi0] FWLOG: [28776] WAL_DBGID_TX_AC_BUFFER_SET ( 0x45, 0x1e, 0x94c, 0x94c, 0x0 )
  677. [ 16.918204] [wifi0] FWLOG: [28776] WAL_DBGID_TX_AC_BUFFER_SET ( 0x67, 0x1e, 0x94c, 0x94c, 0x0 )
  678. [ 18.134780] ol_target_init() Download FW done.
  679. [ 18.138357] ol_ath_attach() WMI attached. wmi_handle cd610000
  680. [ 18.144764] htc_wmi_init() HT Create . cf237000
  681. [ 18.148622] htc_wmi_init() HIF Claim.
  682. [ 18.152444] htc_wmi_init 7732 host_enable 0 nss_nwifi_offload 0
  683. [ 18.158765] ol_ath_set_default_tgt_config : AC Minfree buffer allocation through module param (umac.ko)
  684. [ 18.167825] OL_ACBKMinfree : 0
  685. [ 18.170669] OL_ACBEMinfree : 0
  686. [ 18.174174] OL_ACVIMinfree : 0
  687. [ 18.176919] OL_ACVOMinfree : 0
  688. [ 18.184803] CE_recv_buf_enqueue 877 Populate last entry 512 for CE 5
  689. [ 18.190142] CE_recv_buf_enqueue 886 CE 5 wi 511 dest_ptr 0x8d764480 nbytes 0 recv_ctxt 0xcd747900
  690. [ 18.200521] Startup Mode-0 set
  691. [ 18.202553]
  692. [ 18.202553] <=== cfg max peer id 1056 ====>
  693. [ 18.209267] HTC Service:0x0300 ep:1 TX flow control disabled
  694. [ 18.214611] htt_peer_map_timer_init Enter pdev cd7c8000 hrtimer cd7ca520
  695. [ 18.220593]
  696. [ 18.220593] htt_alloc_peer_map_mem : Alloc Success : host q vaddr ccf42000 paddr 8cf42000
  697. [ 18.230970]
  698. [ 18.230970] htt_alloc_peer_map_mem : Flush Interval Configured to 256 pkts
  699. [ 18.241647] CE_pkt_dl_len_set CE 4 Pkt download length 64
  700. [ 18.246637] ol_txrx_pdev_attach: 2500 tx desc's allocated ; range starts from ccaa0000
  701. [ 18.255370] HTC Service:0x0100 ep:2 TX flow control disabled
  702. [ 18.261113] wmi_service_ready_event_rx: WMI UNIFIED SERVICE READY event
  703. [ 18.267299] Firmware_Build_Number:92
  704. [ 18.270806] num_rf_chain:0x00000002 ht_cap_info:0x0000085b vht_cap_info:0x339959b2 vht_supp_mcs:0x0000fffa
  705. [ 18.280417]
  706. [ 18.280417] RES CFG Support wmi_service_bitmap 9778
  707. [ 18.287494]
  708. Sending Ext resource cfg: HOST PLATFORM as 0 and fw_feature_bitmap as 50 to TGT
  709. [ 18.295663] ol_ath_service_ready_event: tt_support: 1
  710. [ 18.300646] ol_ath_service_ready_event: periodic_chan_stats: 1
  711. [ 18.307142] ol_ath_service_ready_event: sw_cal_support_check_flag: 1
  712. [ 18.312803] Peer Caching Enabled ; num_peers = 257, num_active_peers = 52 num_tids = 104, num_vdevs = 17
  713. [ 18.322841] Mesh Supported
  714. [ 18.325218] idx 1 req 2 num_units 1 num_unit_info 12 unit size 256 actual units 53
  715. [ 18.332721] ol_ath_alloc_host_mem_chunk req_id 2 idx 0 num_units 53 unit_len 256,
  716. [ 18.340604] idx 2 req 3 num_units 1 num_unit_info 12 unit size 1024 actual units 53
  717. [ 18.348273] ol_ath_alloc_host_mem_chunk req_id 3 idx 1 num_units 53 unit_len 1024,
  718. [ 18.355769] idx 3 req 4 num_units 1 num_unit_info 12 unit size 4096 actual units 53
  719. [ 18.363485] ol_ath_alloc_host_mem_chunk req_id 4 idx 2 num_units 53 unit_len 4096,
  720. [ 18.371265] idx 0 req 1 num_units 0 num_unit_info 2 unit size 744 actual units 258
  721. [ 18.378986] ol_ath_alloc_host_mem_chunk req_id 1 idx 3 num_units 258 unit_len 744,
  722. [ 18.386400] idx 4 req 6 num_units 35 num_unit_info 0 unit size 3072 actual units 35
  723. [ 18.394285] ol_ath_alloc_host_mem_chunk req_id 6 idx 4 num_units 35 unit_len 3072,
  724. [ 18.401517] idx 5 req 7 num_units 1 num_unit_info 0 unit size 6144 actual units 1
  725. [ 18.409645] ol_ath_alloc_host_mem_chunk req_id 7 idx 5 num_units 1 unit_len 6144,
  726. [ 18.416891] idx 6 req 5 num_units 0 num_unit_info 2 unit size 2044 actual units 258
  727. [ 18.424841] ol_ath_alloc_host_mem_chunk req_id 5 idx 6 num_units 86 unit_len 2044,
  728. [ 18.432128] ol_ath_alloc_host_mem_chunk req_id 5 idx 7 num_units 86 unit_len 2044,
  729. [ 18.440107] ol_ath_alloc_host_mem_chunk req_id 5 idx 8 num_units 86 unit_len 2044,
  730. [ 18.447344] chunk 0 len 13568 requested ,ptr 0x8cb00000
  731. [ 18.452473] chunk 1 len 54272 requested ,ptr 0x8cb10000
  732. [ 18.458226] chunk 2 len 217088 requested ,ptr 0x8cb40000
  733. [ 18.463321] chunk 3 len 191952 requested ,ptr 0x8cb80000
  734. [ 18.469155] chunk 4 len 107520 requested ,ptr 0x8cb20000
  735. [ 18.474488] chunk 5 len 6144 requested ,ptr 0x8cb04000
  736. [ 18.479550] chunk 6 len 175784 requested ,ptr 0x8cbc0000
  737. [ 18.485382] chunk 7 len 175784 requested ,ptr 0x8c400000
  738. [ 18.490491] chunk 8 len 175784 requested ,ptr 0x8c440000
  739. [ 18.496455] ol_ath_service_ready_event[4067] WAPI MBSSID 2
  740. [ 18.538095] wmi_ready_event_rx: WMI UNIFIED READY event
  741. [ 18.542509] ol_ath_connect_htc() WMI is ready
  742. [ 18.547347] htt_h2t_frag_desc_bank_cfg_msg - HTT_H2T_MSG_TYPE_FRAG_DESC_BANK_CFG sent to FW for radio ID = 1
  743. [ 18.561976] ol_ath_attach() connect HTC.
  744. [ 18.564998] target uses HTT version 2.2; host uses 2.2
  745. [ 18.570465] bypasswmi : 0
  746. [ 18.572695] ol_regdmn_start: reg-domain param: regdmn=0, countryName=, wModeSelect=FFFFFFFF, netBand=FFFFFFFF, extendedChanMode=0.
  747. [ 18.585011] Skipping VHT80 channel 5825
  748. [ 18.589618] acfg_attach: Offload using existing sock cdd9d000
  749. [ 18.595003] SPECTRAL : get_capability not registered
  750. [ 18.599286] HAL_CAP_PHYDIAG : Capable
  751. [ 18.602929] SPECTRAL : Need to fix the capablity check for RADAR (spectral_attach : 237)
  752. [ 18.611707] SPECTRAL : get_capability not registered
  753. [ 18.616201] HAL_CAP_RADAR : Capable
  754. [ 18.619602] SPECTRAL : Need to fix the capablity check for SPECTRAL
  755. [ 18.619602] (spectral_attach : 242)
  756. [ 18.629931] SPECTRAL : get_capability not registered
  757. [ 18.634597] HAL_CAP_SPECTRAL_SCAN : Capable
  758. [ 18.638520] SPECTRAL : get_tsf64 not registered
  759. [ 18.643034] spectral_init_netlink 78 NULL SKB
  760. [ 18.647903] Green-AP : Green-AP : Attached
  761. [ 18.647903]
  762. [ 18.652931] Green-AP : Attached
  763. [ 18.656569] rate power table override is only supported for AR98XX
  764. [ 18.662889] ol_if_dfs_attach: called; ptr=cca99984, radar_info=cd2e1c48
  765. [ 18.669417] dfs_attach: event log enabled by default
  766. [ 18.675819] ipq4019_wifi_led_init: Wifi LED init failed.. Couldn't get led gpio/led source
  767.  
  768. [ 18.683148] ol_ath_attach() UMAC attach .
  769. [ 18.687954]
  770. [ 18.687954] BURSTING enabled by default
  771. [ 18.693354] ACS not enabled
  772. [ 18.696049] __ol_ath_attach: needed_headroom reservation 60
  773. [ 18.709386] ol_ath_thermal_mitigation_attach: --
  774. [ 18.730188] ath_ol_pci: (Atheros/multi-bss)
  775. [ 18.733545] ol_ath_pci_probe: PCI device id 0050 :0050
  776. [ 18.763688] PCI: enabling device 0000:00:00.0 (0144 -> 0147)
  777. [ 18.768343] PCI: enabling device 0000:01:00.0 (0140 -> 0142)
  778. [ 18.778927] *********** Peregrine **************
  779. [ 18.782651] __ol_ath_attach: Creating netdev wifi2
  780. [ 18.788232]
  781. [ 18.788232] __ol_ath_attach() Allocated scn cc5404c0
  782. [ 18.794288] ath_ol_pci 0000:01:00.0: ath DEBUG: sc=0xcd7f0c00
  783. [ 18.799543]
  784. [ 18.799543] ol_ath_pci_configure : num_desired MSI set to 0
  785. [ 18.807302]
  786. [ 18.807302] Using PCI Legacy Interrupt
  787. [ 19.157253] [wifi1] FWLOG: [31129] WAL_DBGID_TX_AC_BUFFER_SET ( 0x3, 0x1e, 0x94c, 0x94c, 0x0 )
  788. [ 19.164835] [wifi1] FWLOG: [31129] WAL_DBGID_TX_AC_BUFFER_SET ( 0x12, 0x1e, 0x94c, 0x94c, 0x0 )
  789. [ 19.173506] [wifi1] FWLOG: [31129] WAL_DBGID_TX_AC_BUFFER_SET ( 0x45, 0x1e, 0x94c, 0x94c, 0x0 )
  790. [ 19.182188] [wifi1] FWLOG: [31129] WAL_DBGID_TX_AC_BUFFER_SET ( 0x67, 0x1e, 0x94c, 0x94c, 0x0 )
  791. [ 19.237116] Switching to Tx Mode-1 Threshold 280
  792. [ 19.813230]
  793. [ 19.813230] CLOCK PLL skipped
  794. [ 19.819578] __ol_ath_attach: dev name wifi2
  795. [ 19.822744] ol_ath_attach interface_id 2
  796. [ 19.827351] ol_target_init() BMI inited.
  797. [ 19.830660] ol_target_init() BMI Get Target Info.
  798. [ 19.835702] Chip id: 0x7, chip version: 0x4100016d
  799. [ 19.840015]
  800. [ 19.840015] CE WAR Disabled
  801. [ 19.845198] NUM_DEV=1 FWMODE=0x2 FWSUBMODE=0x0 FWBR_BUF 0
  802. [ 19.849953] ol_target_init() configure Target .
  803. [ 19.854810] ol_transfer_bin_file: flash data file defined
  804. [ 19.859634] ol_transfer_bin_file[3752] Get Caldata for wifi2.
  805. [ 19.865802] __adf_os_fs_read[42], Open File /tmp/wifi2.caldata SUCCESS!!
  806. [ 19.872045] file system magic:16914836
  807. [ 19.876497] super blocksize:4096
  808. [ 19.879196] inode 1698
  809. [ 19.881588] file size:12064
  810. [ 19.885031] __adf_os_fs_read[55]: caldata data size mismatch, fsize=12064, cal_size=2116
  811. [ 19.892551] ol_transfer_bin_file 3813: Download Flash data len 2116
  812. [ 19.899382] Board extended Data download address: 0x0
  813. [ 19.907988] ol_download_cal_data: Board data file: 4 successfully downloaded, download address: 00401cc0
  814. [ 19.916851]
  815. [ 19.916851] Mission mode: Firmware CHIP Version 0
  816. [ 19.922743] ol_transfer_bin_file: Downloading firmware file: AR9887/athwlan.bin
  817. [ 19.932267] ol_transfer_bin_file 3623: downloading file 1, Download data len 230420
  818. [ 20.927426] ol_target_init() Download FW done.
  819. [ 20.931003] ol_ath_attach() WMI attached. wmi_handle cc5d0000
  820. [ 20.937397] htc_wmi_init() HT Create . cc528800
  821. [ 20.941272] htc_wmi_init() HIF Claim.
  822. [ 20.945423] htc_wmi_init 7732 host_enable 1 nss_nwifi_offload 0
  823. [ 20.950820] ol_ath_set_default_tgt_config : AC Minfree buffer allocation through module param (umac.ko)
  824. [ 20.960844] OL_ACBKMinfree : 0
  825. [ 20.965220] OL_ACBEMinfree : 0
  826. [ 20.967341] OL_ACVIMinfree : 0
  827. [ 20.970459] OL_ACVOMinfree : 0
  828. [ 20.978615] CE_recv_buf_enqueue 877 Populate last entry 512 for CE 5
  829. [ 20.984012] CE_recv_buf_enqueue 886 CE 5 wi 511 dest_ptr 0x8c6f9700 nbytes 0 recv_ctxt 0xcc6c7300
  830. [ 20.993900] Startup Mode-0 set
  831. [ 20.996014]
  832. [ 20.996014] <=== cfg max peer id 1056 ====>
  833. [ 21.001886] HTC Service:0x0300 ep:1 TX flow control disabled
  834. [ 21.008260] htt_peer_map_timer_init Enter pdev cc6cc000 hrtimer cc6ce520
  835. [ 21.014378]
  836. [ 21.014378] htt_alloc_peer_map_mem : Alloc Success : host q vaddr ccf45000 paddr 8cf45000
  837. [ 21.024188]
  838. [ 21.024188] htt_alloc_peer_map_mem : Flush Interval Configured to 256 pkts
  839. [ 21.035149] CE_pkt_dl_len_set CE 4 Pkt download length 64
  840. [ 21.039612] ol_txrx_pdev_attach: 1424 tx desc's allocated ; range starts from cc1b0000
  841. [ 21.049003] HTC Service:0x0100 ep:2 TX flow control disabled
  842. [ 21.055061] wmi_service_ready_event_rx: WMI UNIFIED SERVICE READY event
  843. [ 21.060885] Firmware_Build_Number:0
  844. [ 21.064943] host/RAM_fw Build Ver Mismatch: H:0x5C, F:0x0 !
  845. [ 21.070037] num_rf_chain:0x00000001 ht_cap_info:0x0000085b vht_cap_info:0x338001b2 vht_supp_mcs:0x0000fffe
  846. [ 21.079927]
  847. [ 21.079927] RES CFG Support wmi_service_bitmap 874a
  848. [ 21.087016]
  849. Sending Ext resource cfg: HOST PLATFORM as 1 and fw_feature_bitmap as 50 to TGT
  850. [ 21.095011] ol_ath_service_ready_event: tt_support: 0
  851. [ 21.100196] ol_ath_service_ready_event: periodic_chan_stats: 1
  852. [ 21.106684] ol_ath_service_ready_event: sw_cal_support_check_flag: 0
  853. [ 21.112312] LARGE_AP enabled. num_peers 144, num_vdevs 16, num_tids 256
  854. [ 21.119385] idx 0 req 1 num_units 0 num_unit_info 2 unit size 404 actual units 145
  855. [ 21.126956] ol_ath_alloc_host_mem_chunk req_id 1 idx 0 num_units 145 unit_len 404,
  856. [ 21.134452] chunk 0 len 58580 requested ,ptr 0x8c1d0000
  857. [ 21.146438] FIRMWARE:P 145 V 16 T 443
  858. [ 21.146438]
  859. [ 21.151652] wmi_ready_event_rx: WMI UNIFIED READY event
  860. [ 21.156074] ol_ath_connect_htc() WMI is ready
  861. [ 21.161130] htt_h2t_frag_desc_bank_cfg_msg - HTT_H2T_MSG_TYPE_FRAG_DESC_BANK_CFG sent to FW for radio ID = 2
  862. [ 21.175634] ol_ath_attach() connect HTC.
  863. [ 21.178631] target uses HTT version 2.2; host uses 2.2
  864. [ 21.184181] bypasswmi : 0
  865. [ 21.186356] ol_regdmn_start: reg-domain param: regdmn=0, countryName=, wModeSelect=FFFFFFFF, netBand=FFFFFFFF, extendedChanMode=0.
  866. [ 21.199032] Skipping VHT80 channel 5825
  867. [ 21.203260] acfg_attach: Offload using existing sock cdd9d000
  868. [ 21.208684] SPECTRAL : get_capability not registered
  869. [ 21.212928] HAL_CAP_PHYDIAG : Capable
  870. [ 21.217149] SPECTRAL : Need to fix the capablity check for RADAR (spectral_attach : 237)
  871. [ 21.224976] SPECTRAL : get_capability not registered
  872. [ 21.229677] HAL_CAP_RADAR : Capable
  873. [ 21.233276] SPECTRAL : Need to fix the capablity check for SPECTRAL
  874. [ 21.233276] (spectral_attach : 242)
  875. [ 21.243772] SPECTRAL : get_capability not registered
  876. [ 21.247997] HAL_CAP_SPECTRAL_SCAN : Capable
  877. [ 21.252160] SPECTRAL : get_tsf64 not registered
  878. [ 21.257352] spectral_init_netlink 78 NULL SKB
  879. [ 21.261066] Green-AP : Green-AP : Attached
  880. [ 21.261066]
  881. [ 21.267113] Green-AP : Attached
  882. [ 21.269871] ol_if_dfs_attach: called; ptr=cc209984, radar_info=cd2e1c08
  883. [ 21.276889] dfs_attach: event log enabled by default
  884. [ 21.283065] ol_ath_attach() UMAC attach .
  885. [ 21.287010]
  886. [ 21.287010] BURSTING enabled by default
  887. [ 21.291716] ACS not enabled
  888. [ 21.294998] __ol_ath_attach: hard_header_len reservation 74
  889. [ 21.308077] ol_ath_thermal_mitigation_attach: TT not supported in FW
  890. [ 21.366351] ath_rate_atheros: Copyright (c) 2001-2005 Atheros Communications, Inc, All Rights Reserved
  891. [ 21.399801] ath_dev: Copyright (c) 2001-2007 Atheros Communications, Inc, All Rights Reserved
  892. [ 21.428829] pktlog_init: Initializing Pktlog for AR900B, pktlog_hdr_size = 16
  893. [ 21.445756] pktlog_init: Initializing Pktlog for AR900B, pktlog_hdr_size = 16
  894. [ 21.451999] pktlog_init: Initializing Pktlog for AR9888, pktlog_hdr_size = 12
  895. [ 21.512987]
  896. [ 21.512987] !!!!! {/usr/bin/brain} opening /click/wlan_event/driver_reload failed: No such file or directory
  897. [ 21.533827] Switching to Tx Mode-1 Threshold 280
  898. [ 21.603386] brain: unloading click config
  899. [ 21.607191] brain: spring cleaning pages
  900. [ 21.651669] [ol_ath_iw_setcountry][1733] *p=55, *(p+1)=53
  901. [ 21.657948] isCountryCodeValid: EEPROM regdomain 0x0
  902. [ 21.676543] wlan_vap_create : enter. devhandle=0xcd2804c0, opmode=IEEE80211_M_HOSTAP, flags=0x0
  903. [ 21.685143] ieee80211_mbo_vattach:MBO Initialized
  904. [ 21.689173] wlan_vap_create : exit. devhandle=0xcd2804c0, vap=0xcdd90000, opmode=IEEE80211_M_HOSTAP, flags=0x0.
  905. [ 21.755349] ieee80211_mbo_vattach:MBO Initialized
  906. [ 21.815134] ieee80211_mbo_vattach:MBO Initialized
  907. [ 21.875105] ieee80211_mbo_vattach:MBO Initialized
  908. [ 21.942749] ieee80211_mbo_vattach:MBO Initialized
  909. [ 21.952329] [wifi2] FWLOG: [21342] WAL_DBGID_TX_AC_BUFFER_SET ( 0x3, 0x1e, 0x460, 0x460, 0x0 )
  910. [ 21.983441] [wifi2] FWLOG: [21342] WAL_DBGID_TX_AC_BUFFER_SET ( 0x12, 0x1e, 0x460, 0x460, 0x0 )
  911. [ 22.003291] [wifi2]
  912. [ 22.041473] ieee80211_mbo_vattach:MBO Initialized
  913. [ 22.046032] FWLOG: [21342] WAL_DBGID_TX_AC_BUFFER_SET ( 0x45, 0x1e, 0x460, 0x460, 0x0 )
  914. [ 22.053385] [wifi2] FWLOG: [21342] WAL_DBGID_TX_AC_BUFFER_SET ( 0x67, 0x1e, 0x460, 0x460, 0x0 )
  915. [ 22.099984] [wifi2] FWLOG: [21344] WHAL_ERROR_RESET_PM (
  916. [ 22.116072] ieee80211_mbo_vattach:MBO Initialized
  917. [ 22.130146] )
  918. [ 22.130812] [wifi2] FWLOG: [21349] WAL_DBGID_DEV_RESET ( 0x1, 0x1, 0x1 )
  919. [ 22.187637] ieee80211_mbo_vattach:MBO Initialized
  920. [ 22.247785] ieee80211_mbo_vattach:MBO Initialized
  921. [ 22.299656] ieee80211_mbo_vattach:MBO Initialized
  922. [ 22.367845] ieee80211_mbo_vattach:MBO Initialized
  923. [ 22.428927] ieee80211_mbo_vattach:MBO Initialized
  924. [ 22.488622] ieee80211_mbo_vattach:MBO Initialized
  925. [ 22.546118] ieee80211_mbo_vattach:MBO Initialized
  926. [ 22.608578] ieee80211_mbo_vattach:MBO Initialized
  927. [ 22.666437] ieee80211_mbo_vattach:MBO Initialized
  928. [ 22.670702] ol_txrx_set_mesh_mode val 1
  929. [ 22.725841] wlan_vap_create : enter. devhandle=0xcd2804c0, opmode=IEEE80211_M_MONITOR, flags=0x0
  930. [ 22.740899] wlan_vap_create : exit. devhandle=0xcd2804c0, vap=0xcbc70000, opmode=IEEE80211_M_MONITOR, flags=0x0.
  931. [ 22.773350] brain: loading click config
  932. [ 22.791412]
  933. [ 22.791412] !!!!! {/usr/bin/client_eventd} failed writing /click/client_ip_table/madwifi_clients len 0 data: ""
  934. [ 22.844093]
  935. [ 22.844093] !!!!! {/usr/bin/client_eventd} failed writing /click/client_ip_table/madwifi_clients len 0 data: ""
  936. [ 24.638624] Click Queue signal cb registration failed!
  937. [ 24.759851] OL vap_start -
  938. [ 24.770229] vap-15(mesh0):set SIOC80211NWID, 9 characters
  939. [ 24.775618]
  940. [ 24.775618] DES SSID SET=fast-mesh
  941. [ 24.784364] Setting Tx Encap type to 0 (Raw)
  942. [ 24.791204] Setting Rx Decap type to 0 (Raw)
  943. [ 24.883895]
  944. [ 24.883895] DES SSID SET=
  945. [ 24.929657]
  946. [ 24.929657] !!!!! {/usr/bin/brain} forkexec failed with status 255 cmd -iwpriv apr1v0 shortgi 1
  947. [ 24.952890]
  948. [ 24.952890] DES SSID SET=
  949. [ 24.982216] [wifi0] FWLOG: [37519] WAL channel change freq=2412, mode=2 flags=0 rx_ok=1 tx_ok=1
  950. [ 25.000883]
  951. [ 25.000883] !!!!! {/usr/bin/brain} forkexec failed with status 255 cmd -iwpriv apr1v1 shortgi 1
  952. [ 25.028409]
  953. [ 25.028409] DES SSID SET=
  954. [ 25.071482]
  955. [ 25.071482] !!!!! {/usr/bin/brain} forkexec failed with status 255 cmd -iwpriv apr1v2 shortgi 1
  956. [ 25.099051]
  957. [ 25.099051] DES SSID SET=
  958. [ 25.141933]
  959. [ 25.141933] !!!!! {/usr/bin/brain} forkexec failed with status 255 cmd -iwpriv apr1v3 shortgi 1
  960. [ 25.168812]
  961. [ 25.168812] DES SSID SET=
  962. [ 25.211736]
  963. [ 25.211736] !!!!! {/usr/bin/brain} forkexec failed with status 255 cmd -iwpriv apr1v4 shortgi 1
  964. [ 25.236867]
  965. [ 25.236867] DES SSID SET=
  966. [ 25.279135]
  967. [ 25.279135] !!!!! {/usr/bin/brain} forkexec failed with status 255 cmd -iwpriv apr1v5 shortgi 1
  968. [ 25.306048]
  969. [ 25.306048] DES SSID SET=
  970. [ 25.348148]
  971. [ 25.348148] !!!!! {/usr/bin/brain} forkexec failed with status 255 cmd -iwpriv apr1v6 shortgi 1
  972. [ 25.373034]
  973. [ 25.373034] DES SSID SET=
  974. [ 25.418982]
  975. [ 25.418982] !!!!! {/usr/bin/brain} forkexec failed with status 255 cmd -iwpriv apr1v7 shortgi 1
  976. [ 25.443687]
  977. [ 25.443687] DES SSID SET=
  978. [ 25.485782]
  979. [ 25.485782] !!!!! {/usr/bin/brain} forkexec failed with status 255 cmd -iwpriv apr1v8 shortgi 1
  980. [ 25.511007]
  981. [ 25.511007] DES SSID SET=
  982. [ 25.556726]
  983. [ 25.556726] !!!!! {/usr/bin/brain} forkexec failed with status 255 cmd -iwpriv apr1v9 shortgi 1
  984. [ 25.587503]
  985. [ 25.587503] DES SSID SET=
  986. [ 25.632819]
  987. [ 25.632819] !!!!! {/usr/bin/brain} forkexec failed with status 255 cmd -iwpriv apr1v10 shortgi 1
  988. [ 25.662764]
  989. [ 25.662764] DES SSID SET=
  990. [ 25.710213]
  991. [ 25.710213] !!!!! {/usr/bin/brain} forkexec failed with status 255 cmd -iwpriv apr1v11 shortgi 1
  992. [ 25.737154]
  993. [ 25.737154] DES SSID SET=
  994. [ 25.780087]
  995. [ 25.780087] !!!!! {/usr/bin/brain} forkexec failed with status 255 cmd -iwpriv apr1v12 shortgi 1
  996. [ 25.806297]
  997. [ 25.806297] DES SSID SET=
  998. [ 25.851933]
  999. [ 25.851933] !!!!! {/usr/bin/brain} forkexec failed with status 255 cmd -iwpriv apr1v13 shortgi 1
  1000. [ 25.878369]
  1001. [ 25.878369] DES SSID SET=
  1002. [ 25.919400]
  1003. [ 25.919400] !!!!! {/usr/bin/brain} forkexec failed with status 255 cmd -iwpriv apr1v14 shortgi 1
  1004. [ 28.925080] ess_edma c080000.edma: wired0: GMAC Link is up with phy_speed=100
  1005. [ 30.214927] random: nonblocking pool is initialized
  1006. [ 52.561958] CPU1: Booted secondary processor
  1007. [ 52.562009] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
  1008. [ 52.585140] CPU2: Booted secondary processor
  1009. [ 52.585289] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
  1010. [ 52.596767] CPU3: Booted secondary processor
  1011. [ 52.596825] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
  1012. [ 52.695744]
  1013. [ 52.695744] !!!!! {/usr/bin/brain} forkexec failed with status 255 cmd -iwpriv mon0 packet_counter 0
  1014. [ 52.727633]
  1015. [ 52.727633] !!!!! {/usr/bin/brain} forkexec failed with status 255 cmd -iwpriv wifi0 acktimeout 48
  1016. [ 52.778141] ol_ath_ucfg_setparam[233] PARAM_SENS_LEVEL
  1017. [ 52.783051]
  1018. [ 52.783051] !!!!! {/usr/bin/brain} set wlan_rx_sop_r0 to -95, ret = 0
  1019. [ 52.790502] ol_ath_ucfg_setparam[248] PARAM_CCA_THRESHOLD
  1020. [ 52.796494]
  1021. [ 52.796494] !!!!! {/usr/bin/brain} set wlan_cca_threshold_r0 to -64, ret = 0
  1022. [ 52.851185] wmi_dbg_cfg_send: mod[0]00000000 dbgcfg50000000 cfgvalid[0] 00000000 cfgvalid[1] 00000000
  1023. [ 52.863760] cfg valid value inside module enable 400000wmi_dbg_cfg_send: mod[0]00000000 dbgcfg00000000 cfgvalid[0] 00400000 cfgvalid[1] 00000000
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement
Public Pastes
Advertisement
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!