API tools faq
paste
Advertisement
ukmark62

h6_UART4

ukmark62
Jun 15th, 2019
922
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 24.30 KB | None | 0 0
raw download clone embed print report
  1.  
  2. U-Boot SPL 2018.11-g7702a7c-dirty (Jun 15 2019 - 11:18:38 +0100)
  3. DRAM: 4096 MiB
  4. Trying to boot from MMC1
  5. NOTICE: BL31: v2.1(release):v2.1-264-g5441ed2
  6. NOTICE: BL31: Built : 11:03:02, Jun 10 2019
  7. NOTICE: BL31: Detected Allwinner H6 SoC (1728)
  8. NOTICE: BL31: Found U-Boot DTB at 0xc06ddc0, model: Eachlink H6 Mini
  9. NOTICE: PMIC: Probing AXP805
  10. ERROR: Start clear bit timeout
  11. ERROR: PMIC: Cannot put AXP805 to master mode.
  12.  
  13.  
  14. U-Boot 2018.11-g7702a7c-dirty (Jun 15 2019 - 11:18:38 +0100) Allwinner Technology
  15.  
  16. CPU: Allwinner H6 (SUN50I)
  17. Model: Eachlink H6 Mini
  18. DRAM: 3 GiB
  19. MMC: SUNXI SD/MMC: 0, SUNXI SD/MMC: 1
  20. Loading Environment from FAT... Unable to use mmc 1:1... In: serial@5000000
  21. Out: serial@5000000
  22. Err: serial@5000000
  23. Net: No ethernet found.
  24. starting USB...
  25. No controllers found
  26. Hit any key to stop autoboot: 0
  27. switch to partitions #0, OK
  28. mmc0 is current device
  29. Scanning mmc 0:1...
  30. Found /extlinux/extlinux.conf
  31. Retrieving file: /extlinux/extlinux.conf
  32. 161 bytes read in 3 ms (51.8 KiB/s)
  33. 1: LibreELEC
  34. Retrieving file: /KERNEL
  35. 16626176 bytes read in 1665 ms (9.5 MiB/s)
  36. append: boot=UUID=1206-0000 disk=UUID=52d85c1f-cdb2-41f5-b0ff-e4ccfc776d39 console=ttyS0,115200
  37. Retrieving file: /sun50i-h6-tanix-tx6.dtb
  38. 14963 bytes read in 3 ms (4.8 MiB/s)
  39. ## Flattened Device Tree blob at 4fa00000
  40. Booting using the fdt blob at 0x4fa00000
  41. Loading Device Tree to 0000000049ff9000, end 0000000049fffa72 ... OK
  42.  
  43. Starting kernel ...
  44.  
  45. [ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd034]
  46. [ 0.000000] Linux version 5.1.5 (jenkins@prometheus) (gcc version 8.3.0 (GNU Toolchain for the A-profile Architecture 8.3-2019.03 (arm-rel-8.36))) #1 SMP PREEMPT Wed Jun 12 06:13:16 EDT 2019
  47. [ 0.000000] Machine model: Tanix TX6
  48. [ 0.000000] efi: Getting EFI parameters from FDT:
  49. [ 0.000000] efi: UEFI not found.
  50. [ 0.000000] cma: Reserved 384 MiB at 0x00000000e8000000
  51. [ 0.000000] NUMA: No NUMA configuration found
  52. [ 0.000000] NUMA: Faking a node at [mem 0x0000000040000000-0x00000000ffffffff]
  53. [ 0.000000] NUMA: NODE_DATA [mem 0xe79e4840-0xe79e5fff]
  54. [ 0.000000] Zone ranges:
  55. [ 0.000000] DMA32 [mem 0x0000000040000000-0x00000000ffffffff]
  56. [ 0.000000] Normal empty
  57. [ 0.000000] Movable zone start for each node
  58. [ 0.000000] Early memory node ranges
  59. [ 0.000000] node 0: [mem 0x0000000040000000-0x00000000ffffffff]
  60. [ 0.000000] Initmem setup node 0 [mem 0x0000000040000000-0x00000000ffffffff]
  61. [ 0.000000] psci: probing for conduit method from DT.
  62. [ 0.000000] psci: PSCIv1.1 detected in firmware.
  63. [ 0.000000] psci: Using standard PSCI v0.2 function IDs
  64. [ 0.000000] psci: MIGRATE_INFO_TYPE not supported.
  65. [ 0.000000] psci: SMC Calling Convention v1.1
  66. [ 0.000000] random: get_random_bytes called from start_kernel+0x9c/0x44c with crng_init=0
  67. [ 0.000000] percpu: Embedded 23 pages/cpu s53464 r8192 d32552 u94208
  68. [ 0.000000] Detected VIPT I-cache on CPU0
  69. [ 0.000000] CPU features: detected: ARM erratum 845719
  70. [ 0.000000] Speculative Store Bypass Disable mitigation not required
  71. [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 774144
  72. [ 0.000000] Policy zone: DMA32
  73. [ 0.000000] Kernel command line: boot=UUID=1206-0000 disk=UUID=52d85c1f-cdb2-41f5-b0ff-e4ccfc776d39 console=ttyS0,115200
  74. [ 0.000000] Memory: 2679984K/3145728K available (9020K kernel code, 748K rwdata, 3408K rodata, 3008K init, 349K bss, 72528K reserved, 393216K cma-reserved)
  75. [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
  76. [ 0.000000] rcu: Preemptible hierarchical RCU implementation.
  77. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=4.
  78. [ 0.000000] Tasks RCU enabled.
  79. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
  80. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
  81. [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
  82. [ 0.000000] GIC: Using split EOI/Deactivate mode
  83. [ 0.000000] arch_timer: cp15 timer(s) running at 24.00MHz (phys).
  84. [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
  85. [ 0.000004] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
  86. [ 0.000250] Console: colour dummy device 80x25
  87. [ 0.000316] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=96000)
  88. [ 0.000327] pid_max: default: 32768 minimum: 301
  89. [ 0.000408] LSM: Security Framework initializing
  90. [ 0.002077] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
  91. [ 0.002920] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
  92. [ 0.002972] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
  93. [ 0.003005] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
  94. [ 0.003475] *** VALIDATE proc ***
  95. [ 0.003709] *** VALIDATE cgroup1 ***
  96. [ 0.003718] *** VALIDATE cgroup2 ***
  97. [ 0.028046] ASID allocator initialised with 32768 entries
  98. [ 0.036043] rcu: Hierarchical SRCU implementation.
  99. [ 0.044560] EFI services will not be available.
  100. [ 0.052077] smp: Bringing up secondary CPUs ...
  101. [ 0.084521] Detected VIPT I-cache on CPU1
  102. [ 0.084570] CPU1: Booted secondary processor 0x0000000001 [0x410fd034]
  103. [ 0.116459] Detected VIPT I-cache on CPU2
  104. [ 0.116489] CPU2: Booted secondary processor 0x0000000002 [0x410fd034]
  105. [ 0.148517] Detected VIPT I-cache on CPU3
  106. [ 0.148544] CPU3: Booted secondary processor 0x0000000003 [0x410fd034]
  107. [ 0.148614] smp: Brought up 1 node, 4 CPUs
  108. [ 0.148634] SMP: Total of 4 processors activated.
  109. [ 0.148641] CPU features: detected: 32-bit EL0 Support
  110. [ 0.148648] CPU features: detected: CRC32 instructions
  111. [ 0.148910] CPU: All CPU(s) started at EL2
  112. [ 0.148930] alternatives: patching kernel code
  113. [ 0.150632] devtmpfs: initialized
  114. [ 0.153936] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
  115. [ 0.153988] futex hash table entries: 1024 (order: 4, 65536 bytes)
  116. [ 0.165998] pinctrl core: initialized pinctrl subsystem
  117. [ 0.166747] DMI not present or invalid.
  118. [ 0.167076] NET: Registered protocol family 16
  119. [ 0.167396] audit: initializing netlink subsys (disabled)
  120. [ 0.167512] audit: type=2000 audit(0.164:1): state=initialized audit_enabled=0 res=1
  121. [ 0.168232] cpuidle: using governor menu
  122. [ 0.168484] vdso: 2 pages (1 code @ (____ptrval____), 1 data @ (____ptrval____))
  123. [ 0.168494] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
  124. [ 0.169715] DMA: preallocated 256 KiB pool for atomic allocations
  125. [ 0.170195] Serial: AMBA PL011 UART driver
  126. [ 0.185766] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
  127. [ 0.185779] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages
  128. [ 0.185786] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
  129. [ 0.185793] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages
  130. [ 0.186270] cryptd: max_cpu_qlen set to 1000
  131. [ 0.187677] SCSI subsystem initialized
  132. [ 0.188153] usbcore: registered new interface driver usbfs
  133. [ 0.188209] usbcore: registered new interface driver hub
  134. [ 0.188276] usbcore: registered new device driver usb
  135. [ 0.188601] media: Linux media interface: v0.10
  136. [ 0.188647] videodev: Linux video capture interface: v2.00
  137. [ 0.188876] pps_core: LinuxPPS API ver. 1 registered
  138. [ 0.188884] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
  139. [ 0.188920] PTP clock support registered
  140. [ 0.189610] Advanced Linux Sound Architecture Driver Initialized.
  141. [ 0.190348] clocksource: Switched to clocksource arch_sys_counter
  142. [ 0.190516] VFS: Disk quotas dquot_6.6.0
  143. [ 0.190572] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
  144. [ 0.190617] *** VALIDATE hugetlbfs ***
  145. [ 0.198016] NET: Registered protocol family 2
  146. [ 0.198610] tcp_listen_portaddr_hash hash table entries: 2048 (order: 3, 32768 bytes)
  147. [ 0.198710] TCP established hash table entries: 32768 (order: 6, 262144 bytes)
  148. [ 0.199050] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
  149. [ 0.199557] TCP: Hash tables configured (established 32768 bind 32768)
  150. [ 0.199692] UDP hash table entries: 2048 (order: 4, 65536 bytes)
  151. [ 0.199801] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
  152. [ 0.200030] NET: Registered protocol family 1
  153. [ 0.200500] RPC: Registered named UNIX socket transport module.
  154. [ 0.200507] RPC: Registered udp transport module.
  155. [ 0.200512] RPC: Registered tcp transport module.
  156. [ 0.200517] RPC: Registered tcp NFSv4.1 backchannel transport module.
  157. [ 0.237503] Initialise system trusted keyrings
  158. [ 0.237657] workingset: timestamp_bits=44 max_order=20 bucket_order=0
  159. [ 0.245383] squashfs: version 4.0 (2009/01/31) Phillip Lougher
  160. [ 0.246130] NFS: Registering the id_resolver key type
  161. [ 0.246154] Key type id_resolver registered
  162. [ 0.246159] Key type id_legacy registered
  163. [ 0.246172] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
  164. [ 0.246330] 9p: Installing v9fs 9p2000 file system support
  165. [ 0.252283] Key type asymmetric registered
  166. [ 0.252297] Asymmetric key parser 'x509' registered
  167. [ 0.252360] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 244)
  168. [ 0.252494] io scheduler mq-deadline registered
  169. [ 0.252501] io scheduler kyber registered
  170. [ 0.252942] sun50i-de2-bus 1000000.display-engine: Error couldn't map SRAM to device
  171. [ 0.253642] sun4i-usb-phy 5100400.phy: failed to get clock usb0_phy
  172. [ 0.257798] sun50i-h6-r-pinctrl 7022000.pinctrl: initialized sunXi PIO driver
  173. [ 0.271630] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
  174. [ 0.275178] cacheinfo: Unable to detect cache hierarchy for CPU 0
  175. [ 0.282160] loop: module loaded
  176. [ 0.284118] libphy: Fixed MDIO Bus: probed
  177. [ 0.284857] tun: Universal TUN/TAP device driver, 1.6
  178. [ 0.288339] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  179. [ 0.288353] ehci-platform: EHCI generic platform driver
  180. [ 0.288553] ehci-platform 5101000.usb: EHCI Host Controller
  181. [ 0.288576] ehci-platform 5101000.usb: new USB bus registered, assigned bus number 1
  182. [ 0.289348] ehci-platform 5101000.usb: irq 21, io mem 0x05101000
  183. [ 0.302355] ehci-platform 5101000.usb: USB 2.0 started, EHCI 1.00
  184. [ 0.302984] hub 1-0:1.0: USB hub found
  185. [ 0.303023] hub 1-0:1.0: 1 port detected
  186. [ 0.303600] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
  187. [ 0.303626] ohci-platform: OHCI generic platform driver
  188. [ 0.303805] ohci-platform 5101400.usb: Generic Platform OHCI controller
  189. [ 0.303826] ohci-platform 5101400.usb: new USB bus registered, assigned bus number 2
  190. [ 0.304079] ohci-platform 5101400.usb: irq 22, io mem 0x05101400
  191. [ 0.366978] hub 2-0:1.0: USB hub found
  192. [ 0.367013] hub 2-0:1.0: 1 port detected
  193. [ 0.367877] usbcore: registered new interface driver uas
  194. [ 0.367956] usbcore: registered new interface driver usb-storage
  195. [ 0.370028] sun6i-rtc 7000000.rtc: registered as rtc0
  196. [ 0.370040] sun6i-rtc 7000000.rtc: RTC enabled
  197. [ 0.370123] i2c /dev entries driver
  198. [ 0.370541] IR NEC protocol handler initialized
  199. [ 0.370548] IR RC5(x/sz) protocol handler initialized
  200. [ 0.370553] IR RC6 protocol handler initialized
  201. [ 0.370557] IR JVC protocol handler initialized
  202. [ 0.370563] IR Sony protocol handler initialized
  203. [ 0.370568] IR SANYO protocol handler initialized
  204. [ 0.370572] IR Sharp protocol handler initialized
  205. [ 0.370577] IR MCE Keyboard/mouse protocol handler initialized
  206. [ 0.370582] IR XMP protocol handler initialized
  207. [ 0.370587] ir_imon_decoder: IR iMON protocol handler initialized
  208. [ 0.370592] IR RCMM protocol handler initialized
  209. [ 0.370750] usbcore: registered new interface driver xbox_remote
  210. [ 0.371630] sunxi-wdt 7020400.watchdog: Watchdog enabled (timeout=16 sec, nowayout=0)
  211. [ 0.372187] sdhci: Secure Digital Host Controller Interface driver
  212. [ 0.372195] sdhci: Copyright(c) Pierre Ossman
  213. [ 0.372300] Synopsys Designware Multimedia Card Interface Driver
  214. [ 0.372854] sdhci-pltfm: SDHCI platform and OF driver helper
  215. [ 0.373441] ledtrig-cpu: registered to indicate activity on CPUs
  216. [ 0.374263] usbcore: registered new interface driver usbhid
  217. [ 0.374273] usbhid: USB HID core driver
  218. [ 0.375247] cedrus 1c0e000.video-codec: Device registered as /dev/video0
  219. [ 0.377067] sun4i-i2s 5091000.i2s: Max playback channels changed from 2 to 8
  220. [ 0.377775] Initializing XFRM netlink socket
  221. [ 0.377797] NET: Registered protocol family 17
  222. [ 0.377983] 9pnet: Installing 9P2000 support
  223. [ 0.378006] Key type dns_resolver registered
  224. [ 0.378623] registered taskstats version 1
  225. [ 0.378630] Loading compiled-in X.509 certificates
  226. [ 0.393115] sun50i-h6-pinctrl 300b000.pinctrl: initialized sunXi PIO driver
  227. [ 0.393415] sun50i-h6-pinctrl 300b000.pinctrl: 300b000.pinctrl supply vcc-ph not found, using dummy regulator
  228. [ 0.393848] printk: console [ttyS0] disabled
  229. [ 0.414743] 5000000.serial: ttyS0 at MMIO 0x5000000 (irq = 18, base_baud = 1500000) is a 16550A
  230. [ 1.451680] printk: console [ttyS0] enabled
  231. [ 1.475817] sun4i-drm display-engine: bound 1100000.mixer (ops sun8i_mixer_ops)
  232. [ 1.483303] sun4i-drm display-engine: bound 6510000.tcon-top (ops sun8i_tcon_top_ops)
  233. [ 1.491361] sun4i-drm display-engine: bound 6515000.lcd-controller (ops sun4i_tcon_ops)
  234. [ 1.499417] sun8i-dw-hdmi 6000000.hdmi: 6000000.hdmi supply hvcc not found, using dummy regulator
  235. [ 1.508363] platform connector: connector supply ddc not found, using dummy regulator
  236. [ 1.516536] sun8i-dw-hdmi 6000000.hdmi: Detected HDMI TX controller v2.12a with HDCP (DWC HDMI 2.0 TX PHY)
  237. [ 1.526761] sun8i-dw-hdmi 6000000.hdmi: registered DesignWare HDMI I2C bus driver
  238. [ 1.535157] sun4i-drm display-engine: bound 6000000.hdmi (ops sun8i_dw_hdmi_ops)
  239. [ 1.542567] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
  240. [ 1.549181] [drm] No driver support for vblank timestamp query.
  241. [ 1.555401] [drm] Initialized sun4i-drm 1.0.0 20150629 for display-engine on minor 0
  242. [ 1.563190] [drm] Cannot find any crtc or sizes
  243. [ 1.568317] ehci-platform 5311000.usb: EHCI Host Controller
  244. [ 1.573913] ehci-platform 5311000.usb: new USB bus registered, assigned bus number 3
  245. [ 1.581773] [drm] Cannot find any crtc or sizes
  246. [ 1.586673] ehci-platform 5311000.usb: irq 23, io mem 0x05311000
  247. [ 1.606365] ehci-platform 5311000.usb: USB 2.0 started, EHCI 1.00
  248. [ 1.613047] hub 3-0:1.0: USB hub found
  249. [ 1.616834] hub 3-0:1.0: 1 port detected
  250. [ 1.621535] ohci-platform 5311400.usb: Generic Platform OHCI controller
  251. [ 1.628172] ohci-platform 5311400.usb: new USB bus registered, assigned bus number 4
  252. [ 1.636167] ohci-platform 5311400.usb: irq 24, io mem 0x05311400
  253. [ 1.703050] hub 4-0:1.0: USB hub found
  254. [ 1.706841] hub 4-0:1.0: 1 port detected
  255. [ 1.711617] usb_phy_generic usb_phy_generic.3.auto: usb_phy_generic.3.auto supply vcc not found, using dummy regulator
  256. [ 1.722757] musb-hdrc musb-hdrc.4.auto: MUSB HDRC host driver
  257. [ 1.728517] musb-hdrc musb-hdrc.4.auto: new USB bus registered, assigned bus number 5
  258. [ 1.736891] hub 5-0:1.0: USB hub found
  259. [ 1.740684] hub 5-0:1.0: 1 port detected
  260. [ 1.745649] sun50i-h6-pinctrl 300b000.pinctrl: 300b000.pinctrl supply vcc-pf not found, using dummy regulator
  261. [ 1.756436] sunxi-mmc 4020000.mmc: Got CD GPIO
  262. [ 1.786288] sunxi-mmc 4020000.mmc: initialized, max. request size: 16384 KB, uses new timings mode
  263. [ 1.795948] sun50i-h6-pinctrl 300b000.pinctrl: 300b000.pinctrl supply vcc-pc not found, using dummy regulator
  264. [ 1.830093] sunxi-mmc 4022000.mmc: initialized, max. request size: 2048 KB, uses new timings mode
  265. [ 1.840976] asoc-simple-card sound: i2s-hifi <-> 5091000.i2s mapping ok
  266. [ 1.847651] asoc-simple-card sound: ASoC: no DMI vendor name!
  267. [ 1.854205] sun6i-rtc 7000000.rtc: setting system clock to 1970-01-01T00:00:05 UTC (5)
  268. [ 1.862407] ALSA device list:
  269. [ 1.865392] #0: allwinner-hdmi
  270. [ 1.870416] Freeing unused kernel memory: 3008K
  271. [ 1.874959] mmc0: host does not support reading read-only switch, assuming write-enable
  272. [ 1.885128] mmc0: new high speed SDHC card at address 59b4
  273. [ 1.891808] mmcblk0: mmc0:59b4 EB1QL 29.8 GiB
  274. [ 1.898406] Run /init as init process
  275. [ 1.902155] mmcblk0: p1 p2
  276. [ 1.938289] mmc1: new DDR MMC card at address 0001
  277. [ 1.944260] mmcblk1: mmc1:0001 S0J38Y 58.2 GiB
  278.  
  279. Welcome to LibreELEC (community): nightly-20190612-84baa30!
  280.  
  281. [ OK ] Started Dispatch Password …ts to Console Directory Watch.
  282. [ OK ] Listening on udev Kernel Socket.
  283. [ OK ] Listening on Journal Audit Socket.
  284. [ OK ] Created slice User and Session Slice.
  285. [ OK ] Reached target Slices.
  286. [ OK OK ] Listening on Journal Socket (/dev/log).
  287. Starting Show Version...
  288. [ OK ] Listening on RPCbind Server Activation Socket.
  289. [ OK ] Listening on initctl Compatibility Named Pipe.
  290. [ OK ] Reached target RPC Port Mapper.
  291. [ OK ] Listening on Journal Socket.
  292. Mounting Huge Pages File System...
  293. Mounting POSIX Message Queue File System...
  294. Mounting Variable Directory...
  295. Mounting Kernel Debug File System...
  296. [ OK ] Started Forward Password R…uests to Wall Directory Watch.
  297. [ OK ] Reached target Paths.
  298. [ OK ] Listening on udev Control Socket.
  299. LibreELEC (community): nightly-20190612-84baa30
  300. [ OK ] Started Show Version.
  301. [ OK ] Mounted Huge Pages File System.
  302. [ OK ] Mounted POSIX Message Queue File System.
  303. [ OK ] Mounted Variable Directory.
  304. [ OK ] Mounted Kernel Debug File System.
  305. Starting Create kernel modules tree from overlays...
  306. / # [ OK ] Started Create kernel modules tree from overlays.
  307. Starting Apply Kernel Variables...
  308. Mounting Kernel Configuration File System...
  309. Starting udev Coldplug all Devices...
  310. Starting Create list of re…odes for the current kernel...
  311. Starting Setup machine-id...
  312. Starting Mounting swapfile...
  313. [ OK ] Mounted Kernel Configuration File System.
  314. [ OK ] Started Create list of req… nodes for the current kernel.
  315. [ OK ] Started Apply Kernel Variables.
  316. [ OK ] Started Mounting swapfile.
  317. [ OK ] Reached target Swap.
  318. Mounting Temporary Directory (/tmp)...
  319. [ OK ] Mounted Temporary Directory (/tmp).
  320. [ OK ] Reached target Local File Systems.
  321. [ OK ] Started Setup machine-id.
  322. Starting Create Static Device Nodes in /dev...
  323. Starting Journal Service...
  324. [ OK ] Started Create Static Device Nodes in /dev.
  325. [ OK ] Started Journal Service.
  326. Starting Flush Journal to Persistent Storage...
  327. [ OK ] Started Flush Journal to Persistent Storage.
  328. Starting Create Volatile Files and Directories...
  329. [ OK ] Started Create Volatile Files and Directories.
  330. Starting Setup Timezone data...
  331. Starting OpenSSL configuration service...
  332. Starting Rebuild Journal Catalog...
  333. Starting Add random entropy from file...
  334. Starting Setup User config dir...
  335. Starting RPC Bind...
  336. Starting Setup User cache dir...
  337. Starting Update hwdb.bin...
  338. [ OK ] Started udev Coldplug all Devices.
  339. [ OK ] Started Setup Timezone data.
  340. [ OK ] Started OpenSSL configuration service.
  341. [ OK ] Started Rebuild Journal Catalog.
  342. [ OK ] Started Setup User cache dir.
  343. [ OK ] Started RPC Bind.
  344. [ OK ] Started Setup User config dir.
  345. [ OK ] Started Add random entropy from file.
  346. [ OK ] Started Update hwdb.bin.
  347. Starting udev Kernel Device Manager...
  348. [ OK ] Started udev Kernel Device Manager.
  349. [ OK ] Reached target System Initialization.
  350. [ OK ] Listening on lircd.socket.
  351. [ OK ] Listening on D-Bus System Message Bus Socket.
  352. [ OK ] Reached target Sockets.
  353. [ OK ] Reached target Basic System.
  354. Starting PulseAudio Sound Service...
  355. Starting D-Bus System Message Bus...
  356. Starting Broadcom SDIO Firmware Symlink Service...
  357. Starting Kodi clean debug logs...
  358. Starting Samba Configuration...
  359. Starting Avahi defaults...
  360. Starting Cron defaults...
  361. [ OK ] Started Daily Cleanup of Temporary Directories.
  362. [ OK ] Reached target Timers.
  363. [ OK ] Started Eventlirc server daemon.
  364. Starting Login Service...
  365. [ OK ] Started Kodi clean debug logs.
  366. [ OK ] Started Avahi defaults.
  367. [ OK ] Started Cron defaults.
  368. Starting Cron daemon...
  369. [ OK ] Started Cron daemon.
  370. [ OK ] Started Broadcom SDIO Firmware Symlink Service.
  371. [ OK ] Started D-Bus System Message Bus.
  372. Starting Connection service...
  373. [ OK ] Started Login Service.
  374. [ OK ] Started Samba Configuration.
  375. [ OK ] Started Connection service.
  376. [ OK ] Reached target Network.
  377. [ OK ] Reached target Network is Online.
  378. Starting Samba NMB Daemon...
  379. [ OK ] Started Avahi Daemon.
  380. [ OK ] Started PulseAudio Sound Service.
  381. Starting Hostname Service...
  382. Starting WPA supplicant...
  383. [ OK ] Reached target Sound Card.
  384. [ OK ] Started Hostname Service.
  385. [ OK ] Started WPA supplicant.
  386. [ OK ] Created slice system-udevil\x2dmount.slice.
  387. Starting Udevil mount service...
  388. Starting Udevil mount service...
  389. Starting Udevil mount service...
  390. Starting Udevil mount service...
  391. Starting Udevil mount service...
  392. Starting Udevil mount service...
  393. [ OK ] Started Samba NMB Daemon.
  394. Starting Samba SMB Daemon...
  395. [ OK ] Started Udevil mount service.
  396. [ OK ] Started Samba SMB Daemon.
  397. [ OK ] Reached target Multi-User System.
  398. Starting Setup symlink for ARM Mali library...
  399. [ OK ] Started Setup symlink for ARM Mali library.
  400. [ OK ] Reached target Graphical Interface.
  401. Starting Kodi Media Center...
  402. [ OK ] Started Kodi Media Center.
  403. [ OK ] Reached target Kodi Mediacenter Interface.
  404. [ OK ] Stopped Kodi Media Center.
  405. Starting Kodi Media Center...
  406. [ OK ] Started Kodi Media Center.
  407. [ OK ] Stopped Kodi Media Center.
  408. Starting Kodi Media Center...
  409. [ OK ] Started Kodi Media Center.
  410. [ OK ] Stopped Kodi Media Center.
  411. Starting Kodi Media Center...
  412. [ OK ] Started Kodi Media Center.
  413. [ OK ] Stopped Kodi Media Center.
  414. Starting Kodi Media Center...
  415. [ OK ] Started Kodi Media Center.
  416. [ OK ] Stopped Kodi Media Center.
  417. Starting Kodi Media Center...
  418. [ OK ] Started Kodi Media Center.
  419. [ OK ] Stopped Kodi Media Center.
  420. Starting Kodi Media Center...
  421. [ OK ] Started Kodi Media Center.
  422. [ OK ] Stopped Kodi Media Center.
  423. Starting Kodi Media Center...
  424. [ OK ] Started Kodi Media Center.
  425. [ OK ] Stopped Kodi Media Center.
  426. Starting Kodi Media Center...
  427. [ OK ] Started Kodi Media Center.
  428. [ OK ] Stopped Kodi Media Center.
  429. Starting Kodi Media Center...
  430. [ OK ] Started Kodi Media Center.
  431. [ OK ] Stopped Kodi Media Center.
  432. Starting Kodi Media Center...
  433. [ OK ] Started Kodi Media Center.
  434. [ OK ] Stopped Kodi Media Center.
  435. Starting Kodi Media Center...
  436. [ OK ] Started Kodi Media Center.
  437. [ OK ] Stopped Kodi Media Center.
  438. Starting Kodi Media Center...
  439. [ OK ] Started Kodi Media Center.
  440. [ OK ] Stopped Kodi Media Center.
  441. Starting Kodi Media Center...
  442. [ OK ] Started Kodi Media Center.
  443. [ OK ] Stopped Kodi Media Center.
  444. Starting Kodi Media Center...
  445. [ OK ] Started Kodi Media Center.
  446. [ OK ] Stopped Kodi Media Center.
  447. Starting Kodi Media Center...
  448. [ OK ] Started Kodi Media Center.
  449. [ OK ] Stopped Kodi Media Center.
  450. Starting Kodi Media Center...
  451. [ OK ] Started Kodi Media Center.
  452. [ OK ] Stopped Kodi Media Center.
  453. Starting Kodi Media Center...
  454. [ OK ] Started Kodi Media Center.
  455. [ OK ] Stopped Kodi Media Center.
  456. Starting Kodi Media Center...
  457. [ OK ] Started Kodi Media Center.
  458. [ OK ] Stopped Kodi Media Center.
  459. Starting Kodi Media Center...
  460. [ OK ] Started Kodi Media Center.
  461. [ OK ] Stopped Kodi Media Center.
  462. Starting Kodi Media Center...
  463. [ OK ] Started Kodi Media Center.
  464. [ OK ] Stopped Kodi Media Center.
  465. Starting Kodi Media Center...
  466. [ OK ] Started Kodi Media Center.
  467. [ OK ] Stopped Kodi Media Center.
  468. Starting Kodi Media Center...
  469. [ OK ] Started Kodi Media Center.
  470. [
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement
Public Pastes
Advertisement
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!