Advertisement
zombah

4.1.3 tegra_defconfig broken lcd

Aug 9th, 2015
190
0
Never
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 27.13 KB | None | 0 0
  1. U-Boot 2014.07-g30d404e (Jul 21 2014 - 23:37:23)
  2.  
  3. TEGRA20
  4. Board: Compal Paz00
  5. I2C: ready
  6. DRAM: 512 MiB
  7. MMC: Tegra SD/MMC: 0, Tegra SD/MMC: 1
  8. *** Warning - bad CRC, using default environment
  9.  
  10. In: tegra-nvec-kbc
  11. Out: lcd
  12. Err: lcd
  13. Net: Net Initialization Skipped
  14. No ethernet found.
  15. switch to partitions #0, OK
  16. mmc1 is current device
  17. Scanning mmc 1...
  18. Found U-Boot script /boot.scr
  19. 2761 bytes read in 34 ms (79.1 KiB/s)
  20. ## Executing script at 10000000
  21. switch to partitions #0, OK
  22. mmc1 is current device
  23. 5372520 bytes read in 390 ms (13.1 MiB/s)
  24. 45756465 bytes read in 2709 ms (16.1 MiB/s)
  25. 27382 bytes read in 101 ms (264.6 KiB/s)
  26. Kernel image @ 0x1000000 [ 0x000000 - 0x51fa68 ]
  27. ## Loading init Ramdisk from Legacy Image at 02200000 ...
  28. Image Name: Initrd
  29. Image Type: ARM Linux RAMDisk Image (uncompressed)
  30. Data Size: 45756401 Bytes = 43.6 MiB
  31. Load Address: 00000000
  32. Entry Point: 00000000
  33. Verifying Checksum ... OK
  34. ## Flattened Device Tree blob at 02000000
  35. Booting using the fdt blob at 0x2000000
  36. Using Device Tree in place at 02000000, end 02009af5
  37.  
  38. Starting kernel ...
  39.  
  40. Uncompressing Linux... done, booting the kernel.
  41. [ 0.000000] Booting Linux on physical CPU 0x0
  42. [ 0.000000] Initializing cgroup subsys cpu
  43. [ 0.000000] Initializing cgroup subsys cpuacct
  44. [ 0.000000] Linux version 4.1.3-dirty (zombah@gilgamesh) (gcc version 4.5.2 (Sourcery G++ Lite 2011.03-41) ) #1 SMP PREEMPT Sat Aug 8 21:13:38 MSK 2015
  45. [ 0.000000] CPU: ARMv7 Processor [411fc090] revision 0 (ARMv7), cr=10c5387d
  46. [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
  47. [ 0.000000] Machine model: Toshiba AC100 / Dynabook AZ
  48. [ 0.000000] cma: Reserved 64 MiB at 0x1c000000
  49. [ 0.000000] Memory policy: Data cache writealloc
  50. [ 0.000000] PERCPU: Embedded 12 pages/cpu @dbbab000 s17216 r8192 d23744 u49152
  51. [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 130048
  52. [ 0.000000] Kernel command line: plymouth.enable=0 console=ttyS0,115200n8 console=tty showopts
  53. [ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
  54. [ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
  55. [ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
  56. [ 0.000000] Memory: 398580K/524288K available (7363K kernel code, 306K rwdata, 2268K rodata, 316K init, 351K bss, 60172K reserved, 65536K cma-reserved, 0K highmem)
  57. [ 0.000000] Virtual kernel memory layout:
  58. [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
  59. [ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB)
  60. [ 0.000000] vmalloc : 0xe0800000 - 0xff000000 ( 488 MB)
  61. [ 0.000000] lowmem : 0xc0000000 - 0xe0000000 ( 512 MB)
  62. [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
  63. [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
  64. [ 0.000000] .text : 0xc0008000 - 0xc097004c (9633 kB)
  65. [ 0.000000] .init : 0xc0971000 - 0xc09c0000 ( 316 kB)
  66. [ 0.000000] .data : 0xc09c0000 - 0xc0a0ca20 ( 307 kB)
  67. [ 0.000000] .bss : 0xc0a0f000 - 0xc0a66e54 ( 352 kB)
  68. [ 0.000000] Preemptible hierarchical RCU implementation.
  69. [ 0.000000] Additional per-CPU info printed with stalls.
  70. [ 0.000000] RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
  71. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
  72. [ 0.000000] NR_IRQS:16 nr_irqs:16 16
  73. [ 0.000000] /interrupt-controller@60004000: 128 interrupts forwarded to /interrupt-controller@50041000
  74. [ 0.000000] L2C: platform modifies aux control register: 0x02080000 -> 0x3e480001
  75. [ 0.000000] L2C: DT/platform modifies aux control register: 0x02080000 -> 0x3e480001
  76. [ 0.000000] L2C-310 errata 727915 769419 enabled
  77. [ 0.000000] L2C-310 enabling early BRESP for Cortex-A9
  78. [ 0.000000] L2C-310: enabling full line of zeros but not enabled in Cortex-A9
  79. [ 0.000000] L2C-310 ID prefetch enabled, offset 1 lines
  80. [ 0.000000] L2C-310 cache controller enabled, 8 ways, 1024 kB
  81. [ 0.000000] L2C-310: CACHE_ID 0x410000c4, AUX_CTRL 0x7e480001
  82. [ 0.000010] sched_clock: 32 bits at 1000kHz, resolution 1000ns, wraps every 2147483647500ns
  83. [ 0.000028] clocksource timer_us: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275 ns
  84. [ 0.000038] Switching to timer-based delay loop, resolution 1000ns
  85. [ 0.000636] Console: colour dummy device 80x30
  86. [ 0.001221] console [tty0] enabled
  87. [ 0.001245] Calibrating delay loop (skipped), value calculated using timer frequency.. 2.00 BogoMIPS (lpj=10000)
  88. [ 0.001281] pid_max: default: 32768 minimum: 301
  89. [ 0.001688] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
  90. [ 0.001715] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
  91. [ 0.003305] Initializing cgroup subsys freezer
  92. [ 0.003349] Initializing cgroup subsys debug
  93. [ 0.003413] CPU: Testing write buffer coherency: ok
  94. [ 0.003718] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
  95. [ 0.003778] Setting up static identity map for 0x8440 - 0x84d8
  96. [ 0.040181] Tegra Revision: A02 SKU: 8 CPU Process: 2 Core Process: 1
  97. [ 0.061046] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
  98. [ 0.061110] Brought up 2 CPUs
  99. [ 0.061150] SMP: Total of 2 processors activated (4.00 BogoMIPS).
  100. [ 0.061169] CPU: All CPU(s) started in SVC mode.
  101. [ 0.061833] devtmpfs: initialized
  102. [ 0.080256] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 1
  103. [ 0.080957] clocksource jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
  104. [ 0.084199] pinctrl core: initialized pinctrl subsystem
  105. [ 0.086181] NET: Registered protocol family 16
  106. [ 0.087933] DMA: preallocated 256 KiB pool for atomic coherent allocations
  107. [ 0.119984] cpuidle: using governor ladder
  108. [ 0.149982] cpuidle: using governor menu
  109. [ 0.169659] No ATAGs?
  110. [ 0.169690] hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers.
  111. [ 0.169736] hw-breakpoint: maximum watchpoint size is 4 bytes.
  112. [ 0.223219] +3VS,vdd_pnl: Failed to request enable GPIO4: -517
  113. [ 0.223395] reg-fixed-voltage regulators:regulator@1: Failed to register regulator: -517
  114. [ 0.226524] vgaarb: loaded
  115. [ 0.228099] SCSI subsystem initialized
  116. [ 0.229257] usbcore: registered new interface driver usbfs
  117. [ 0.229455] usbcore: registered new interface driver hub
  118. [ 0.229620] usbcore: registered new device driver usb
  119. [ 0.232489] tps6586x 2-0034: Found TPS6586X, VERSIONCRC is 05
  120. [ 0.252621] Linux video capture interface: v2.00
  121. [ 0.252788] pps_core: LinuxPPS API ver. 1 registered
  122. [ 0.252809] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
  123. [ 0.252909] PTP clock support registered
  124. [ 0.253877] Advanced Linux Sound Architecture Driver Initialized.
  125. [ 0.255452] Bluetooth: Core ver 2.20
  126. [ 0.255556] NET: Registered protocol family 31
  127. [ 0.255576] Bluetooth: HCI device and connection manager initialized
  128. [ 0.255612] Bluetooth: HCI socket layer initialized
  129. [ 0.255645] Bluetooth: L2CAP socket layer initialized
  130. [ 0.255716] Bluetooth: SCO socket layer initialized
  131. [ 0.256562] cfg80211: Calling CRDA to update world regulatory domain
  132. [ 0.257295] Switched to clocksource timer_us
  133. [ 0.283803] NET: Registered protocol family 2
  134. [ 0.285046] TCP established hash table entries: 4096 (order: 2, 16384 bytes)
  135. [ 0.285120] TCP bind hash table entries: 4096 (order: 3, 32768 bytes)
  136. [ 0.285187] TCP: Hash tables configured (established 4096 bind 4096)
  137. [ 0.285583] UDP hash table entries: 256 (order: 1, 8192 bytes)
  138. [ 0.285629] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
  139. [ 0.285982] NET: Registered protocol family 1
  140. [ 0.286759] RPC: Registered named UNIX socket transport module.
  141. [ 0.286786] RPC: Registered udp transport module.
  142. [ 0.286804] RPC: Registered tcp transport module.
  143. [ 0.286821] RPC: Registered tcp NFSv4.1 backchannel transport module.
  144. [ 0.288754] Unpacking initramfs...
  145. [ 3.417375] cfg80211: Calling CRDA to update world regulatory domain
  146. [ 4.002622] Freeing initrd memory: 44688K (c2200000 - c4da4000)
  147. [ 4.003180] CPU PMU: Failed to parse /pmu/interrupt-affinity[0]
  148. [ 4.003243] hw perfevents: enabled with armv7_cortex_a9 PMU driver, 7 counters available
  149. [ 4.005630] futex hash table entries: 512 (order: 3, 32768 bytes)
  150. [ 4.008569] squashfs: version 4.0 (2009/01/31) Phillip Lougher
  151. [ 4.011496] io scheduler noop registered (default)
  152. [ 4.016924] backlight supply power not found, using dummy regulator
  153. [ 4.017646] tegra-ahb 6000c004.ahb: incorrect AHB base address in DT data - enabling workaround
  154. [ 4.023828] tegra-apbdma 6000a000.dma: Tegra20 APB DMA driver register 16 channels
  155. [ 4.025010] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
  156. [ 4.028918] console [ttyS0] disabled
  157. [ 4.028981] 70006000.serial: ttyS0 at MMIO 0x70006000 (irq = 279, base_baud = 13500000) is a Tegra
  158. [ 4.721018] console [ttyS0] enabled
  159. [ 4.725576] 70006200.serial: ttyS1 at MMIO 0x70006200 (irq = 280, base_baud = 13500000) is a Tegra
  160. [ 4.736981] [drm] Initialized drm 1.1.0 20060810
  161. [ 4.742071] tegra-dc 54200000.dc: failed to probe RGB output: -517
  162. [ 4.749158] 54280000.hdmi supply hdmi not found, using dummy regulator
  163. [ 4.755790] vdd_sys: supplied by +5valw
  164. [ 4.759707] +3.7vs_sm2,vin_ldo*: supplied by vdd_sys
  165. [ 4.764902] +1.8vs_ldo8,avdd_hdmi_pll: supplied by +3.7vs_sm2,vin_ldo*
  166. [ 4.771920] +3.3vs_ldo7,avdd_hdmi: supplied by +3.7vs_sm2,vin_ldo*
  167. [ 4.794293] loop: module loaded
  168. [ 4.801766] CAN device driver interface
  169. [ 4.805738] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.2.15-k
  170. [ 4.812806] igb: Copyright (c) 2007-2014 Intel Corporation.
  171. [ 4.818799] pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethernet driver
  172. [ 4.826357] usbcore: registered new interface driver pegasus
  173. [ 4.832226] usbcore: registered new interface driver asix
  174. [ 4.837786] usbcore: registered new interface driver ax88179_178a
  175. [ 4.844024] usbcore: registered new interface driver cdc_ether
  176. [ 4.850084] usbcore: registered new interface driver smsc75xx
  177. [ 4.856025] usbcore: registered new interface driver smsc95xx
  178. [ 4.861934] usbcore: registered new interface driver net1080
  179. [ 4.867755] usbcore: registered new interface driver cdc_subset
  180. [ 4.873818] usbcore: registered new interface driver zaurus
  181. [ 4.879627] usbcore: registered new interface driver cdc_ncm
  182. [ 4.885563] tegra-phy c5000000.usb-phy: no vbus regulator
  183. [ 4.892098] tegra-phy c5004000.usb-phy: no vbus regulator
  184. [ 4.897649] tegra-phy c5008000.usb-phy: no vbus regulator
  185. [ 4.903352] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  186. [ 4.909903] ehci-pci: EHCI PCI platform driver
  187. [ 4.914496] tegra-ehci: Tegra EHCI driver
  188. [ 4.919958] utmi_phy_clk_enable: timeout waiting for phy to stabilize
  189. [ 4.926420] tegra-ehci c5000000.usb: EHCI Host Controller
  190. [ 4.931873] tegra-ehci c5000000.usb: new USB bus registered, assigned bus number 1
  191. [ 4.939918] tegra-ehci c5000000.usb: irq 286, io mem 0xc5000000
  192. [ 4.957325] tegra-ehci c5000000.usb: USB 2.0 started, EHCI 1.00
  193. [ 4.965039] hub 1-0:1.0: USB hub found
  194. [ 4.968878] hub 1-0:1.0: 1 port detected
  195. [ 5.007443] tegra-ehci c5004000.usb: EHCI Host Controller
  196. [ 5.012883] tegra-ehci c5004000.usb: new USB bus registered, assigned bus number 2
  197. [ 5.020770] tegra-ehci c5004000.usb: irq 287, io mem 0xc5004000
  198. [ 5.037321] tegra-ehci c5004000.usb: USB 2.0 started, EHCI 1.00
  199. [ 5.044935] hub 2-0:1.0: USB hub found
  200. [ 5.048775] hub 2-0:1.0: 1 port detected
  201. [ 5.056167] tegra-ehci c5008000.usb: EHCI Host Controller
  202. [ 5.061644] tegra-ehci c5008000.usb: new USB bus registered, assigned bus number 3
  203. [ 5.070519] tegra-ehci c5008000.usb: irq 288, io mem 0xc5008000
  204. [ 5.087321] tegra-ehci c5008000.usb: USB 2.0 started, EHCI 1.00
  205. [ 5.094934] hub 3-0:1.0: USB hub found
  206. [ 5.098759] hub 3-0:1.0: 1 port detected
  207. [ 5.103815] usbcore: registered new interface driver cdc_acm
  208. [ 5.109514] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
  209. [ 5.117707] usbcore: registered new interface driver cdc_wdm
  210. [ 5.123608] usbcore: registered new interface driver usb-storage
  211. [ 5.130519] mousedev: PS/2 mouse device common for all mice
  212. [ 5.139087] tegra_rtc 7000e000.rtc: rtc core: registered 7000e000.rtc as rtc1
  213. [ 5.146331] tegra_rtc 7000e000.rtc: Tegra internal Real Time Clock
  214. [ 5.154426] tps6586x-rtc tps6586x-rtc: rtc core: registered tps6586x-rtc as rtc0
  215. [ 5.163271] i2c /dev entries driver
  216. [ 5.168524] usbcore: registered new interface driver uvcvideo
  217. [ 5.174273] USB Video Class driver (1.1.1)
  218. [ 5.178395] gspca_main: v2.14.0 registered
  219. [ 5.183233] 2-004c supply vcc not found, using dummy regulator
  220. [ 5.191107] sdhci: Secure Digital Host Controller Interface driver
  221. [ 5.197306] sdhci: Copyright(c) Pierre Ossman
  222. [ 5.201668] sdhci-pltfm: SDHCI platform and OF driver helper
  223. [ 5.207653] sdhci-tegra c8000000.sdhci: Got CD GPIO
  224. [ 5.212549] sdhci-tegra c8000000.sdhci: Got WP GPIO
  225. [ 5.217576] sdhci-tegra c8000000.sdhci: No vmmc regulator found
  226. [ 5.223499] sdhci-tegra c8000000.sdhci: No vqmmc regulator found
  227. [ 5.229518] mmc0: Invalid maximum block size, assuming 512 bytes
  228. [ 5.267522] mmc0: SDHCI controller on c8000000.sdhci [c8000000.sdhci] using ADMA
  229. [ 5.275169] sdhci-tegra c8000600.sdhci: No vmmc regulator found
  230. [ 5.281159] sdhci-tegra c8000600.sdhci: No vqmmc regulator found
  231. [ 5.287204] mmc1: Invalid maximum block size, assuming 512 bytes
  232. [ 5.326651] mmc0: new high speed SDHC card at address 59b4
  233. [ 5.332170] mmc1: SDHCI controller on c8000600.sdhci [c8000600.sdhci] using ADMA
  234. [ 5.341702] usbcore: registered new interface driver usbhid
  235. [ 5.347279] usbhid: USB HID core driver
  236. [ 5.351154] mmcblk0: mmc0:59b4 NCard 7.51 GiB
  237. [ 5.357384] mmcblk0: p1 p2
  238. [ 5.367273] nvec 7000c500.nvec: ec firmware version 01.20.00 / f9
  239. [ 5.367351] usb 2-1: new high-speed USB device number 2 using tegra-ehci
  240. [ 5.385108] input: nvec keyboard as /devices/soc0/7000c500.nvec/nvec-kbd.0/input/input1
  241. [ 5.404821] tegra-alc5632 sound: alc5632-hifi <-> 70002800.i2s mapping ok
  242. [ 5.417373] usb 3-1: new high-speed USB device number 2 using tegra-ehci
  243. [ 5.512172] mmc1: power class selection to bus width 8 ddr 0 failed
  244. [ 5.518464] mmc1: new high speed MMC card at address 0001
  245. [ 5.524718] mmcblk1: mmc1:0001 MMC32G 29.8 GiB
  246. [ 5.529698] mmcblk1boot0: mmc1:0001 MMC32G partition 1 2.00 MiB
  247. [ 5.537271] hub 2-1:1.0: USB hub found
  248. [ 5.541223] mmcblk1boot1: mmc1:0001 MMC32G partition 2 2.00 MiB
  249. [ 5.547170] hub 2-1:1.0: 2 ports detected
  250. [ 5.551449] mmcblk1rpmb: mmc1:0001 MMC32G partition 3 256 KiB
  251. [ 5.568174] mmcblk1: p1 p2 p3 p4 p5 p6 p7
  252. [ 5.573244] hub 3-1:1.0: USB hub found
  253. [ 5.577396] hub 3-1:1.0: 3 ports detected
  254. [ 5.597346] psmouse serio0: Failed to reset mouse on nvec
  255. [ 5.837599] usb 2-1.1: new high-speed USB device number 3 using tegra-ehci
  256. [ 5.923497] input: Compal PAZ00 Headset Jack as /devices/soc0/sound/sound/card0/input2
  257. [ 5.935619] NET: Registered protocol family 10
  258. [ 5.944898] mip6: Mobile IPv6
  259. [ 5.948077] sit: IPv6 over IPv4 tunneling driver
  260. [ 5.962711] NET: Registered protocol family 17
  261. [ 5.967601] NET: Registered protocol family 15
  262. [ 5.972292] can: controller area network core (rev 20120528 abi 9)
  263. [ 5.979271] NET: Registered protocol family 29
  264. [ 5.983796] can: raw protocol (rev 20120528)
  265. [ 5.988384] can: broadcast manager protocol (rev 20120528 t)
  266. [ 5.994286] can: netlink gateway (rev 20130117) max_hops=1
  267. [ 6.000529] Bluetooth: RFCOMM socket layer initialized
  268. [ 6.005921] Bluetooth: RFCOMM ver 1.11
  269. [ 6.012434] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
  270. [ 6.018835] Bluetooth: BNEP socket layer initialized
  271. [ 6.023928] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
  272. [ 6.030903] Bluetooth: HIDP socket layer initialized
  273. [ 6.042934] rfkill_gpio rfkill_gpio: wifi_rfkill device registered.
  274. [ 6.050453] Registering SWP/SWPB emulation handler
  275. [ 6.065566] tegra-dc 54200000.dc: failed to probe RGB output: -517
  276. [ 6.085183] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
  277. [ 6.091973] [drm] No driver support for vblank timestamp query.
  278. [ 6.107798] usb 2-1.2: new full-speed USB device number 4 using tegra-ehci
  279. [ 6.150913] Console: switching to colour frame buffer device 128x37
  280. [ 6.165199] drm drm: fb0: frame buffer device
  281. [ 6.169806] drm drm: registered panic notifier
  282. [ 6.197340] [drm] Initialized tegra 0.0.0 20120330 on minor 0
  283. [ 6.204525] input: gpio-keys as /devices/soc0/gpio-keys/input/input3
  284. [ 6.212977] tps6586x-rtc tps6586x-rtc: setting system clock to 2015-08-09 19:50:46 UTC (1439149846)
  285. [ 6.235910] ALSA device list:
  286. [ 6.238967] #0: Compal PAZ00
  287. [ 6.246512] Freeing unused kernel memory: 316K (c0971000 - c09c0000)
  288. [ 6.577353] cfg80211: Calling CRDA to update world regulatory domain
  289. [ 7.278405] psmouse serio0: elantech: assuming hardware version 3 (with firmware version 0x150500)
  290. [ 7.337016] psmouse serio0: elantech: Synaptics capabilities query result 0x69, 0x17, 0x09.
  291. [ 7.548293] input: ETPS/2 Elantech Touchpad as /devices/serio0/input/input0
  292. [ 8.054089] systemd-udevd[224]: starting version 219
  293. [ 8.064768] random: systemd-udevd urandom read with 40 bits of entropy available
  294. [ 8.083915] systemd-udevd[224]: invalid key/value pair in file /usr/lib/udev/rules.d/58-scsi-sg3_symlink.rules on line 17, starting at character 64 (',')
  295. [ 9.749229] cfg80211: Calling CRDA to update world regulatory domain
  296. [ 12.917388] cfg80211: Calling CRDA to update world regulatory domain
  297. [ 13.842614] systemd-udevd[233]: inotify_add_watch(7, /dev/mmcblk0p2, 10) failed: No such file or directory
  298. [ 13.871084] systemd-udevd[233]: inotify_add_watch(7, /dev/mmcblk0p2, 10) failed: No such file or directory
  299. [ 13.893415] systemd-udevd[233]: inotify_add_watch(7, /dev/mmcblk0p2, 10) failed: No such file or directory
  300. [ 13.915475] systemd-udevd[233]: inotify_add_watch(7, /dev/mmcblk0p2, 10) failed: No such file or directory
  301. [ 13.939706] systemd-udevd[233]: inotify_add_watch(7, /dev/mmcblk0p2, 10) failed: No such file or directory
  302. [ 13.959745] systemd-udevd[233]: inotify_add_watch(7, /dev/mmcblk0p2, 10) failed: No such file or directory
  303. [ 14.407406] random: nonblocking pool is initialized
  304. [ 16.087559] cfg80211: Calling CRDA to update world regulatory domain
  305. [ 18.410568] mmcblk0: p1 p2 p3
  306. [ 19.257467] cfg80211: Calling CRDA to update world regulatory domain
  307. [ 22.437354] cfg80211: Calling CRDA to update world regulatory domain
  308. [ 24.690649] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
  309. [ 25.160634] kjournald starting. Commit interval 5 seconds
  310. [ 25.174009] EXT3-fs (mmcblk0p1): using internal journal
  311. [ 25.183154] EXT3-fs (mmcblk0p1): mounted filesystem with writeback data mode
  312. [ 25.607398] cfg80211: Calling CRDA to update world regulatory domain
  313. [ 28.777422] cfg80211: Calling CRDA to update world regulatory domain
  314. [ 30.936363] kjournald starting. Commit interval 5 seconds
  315. [ 30.948668] EXT3-fs (mmcblk0p1): using internal journal
  316. [ 30.958644] EXT3-fs (mmcblk0p1): mounted filesystem with writeback data mode
  317. [ 31.947950] cfg80211: Calling CRDA to update world regulatory domain
  318. [ 35.117424] cfg80211: Exceeded CRDA call max attempts. Not calling CRDA
  319. [ 37.258048] kjournald starting. Commit interval 5 seconds
  320. [ 37.274393] EXT3-fs (mmcblk0p1): using internal journal
  321. [ 37.288573] EXT3-fs (mmcblk0p1): mounted filesystem with writeback data mode
  322. [ 41.085848] systemd-udevd[1745]: starting version 219
  323. [ 41.151925] systemd-udevd[1745]: invalid key/value pair in file /usr/lib/udev/rules.d/58-scsi-sg3_symlink.rules on line 17, starting at character 64 (',')
  324. [ 78.975269] systemd[1]: Failed to insert module 'autofs4'
  325. [ 78.991853] systemd[1]: systemd 219 running in system mode. (+PAM +AUDIT +SELINUX -IMA +APPARMOR -SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID -ELFUTILS +KMOD +IDN)
  326. [ 79.015892] systemd[1]: Detected architecture 'arm'.
  327. [ 79.032921] systemd[1]: Set hostname to <linux>.
  328. [ 79.186894] systemd-sysv-generator[4902]: Overwriting existing symlink /run/systemd/generator.late/after.local.service with real service
  329. [ 79.207404] systemd-sysv-generator[4902]: Overwriting existing symlink /run/systemd/generator.late/raw.service with real service
  330. [ 79.227116] systemd-sysv-generator[4902]: Overwriting existing symlink /run/systemd/generator.late/rpmconfigcheck.service with real service
  331. [ 79.249356] systemd-sysv-generator[4902]: Overwriting existing symlink /run/systemd/generator.late/halt.local.service with real service
  332. [ 79.274126] systemd-sysv-generator[4902]: Overwriting existing symlink /run/systemd/generator.late/local.service with real service
  333. [ 79.305807] systemd[1]: Unit type .busname is not supported on this system.
  334. [ 79.370995] systemd[1]: [/usr/lib/systemd/system/after-local.service:18] Support for option SysVStartPriority= has been removed and it is ignored
  335. [ 79.417171] systemd[1]: Dependency Before=nss-lookup.target dropped from unit nss-lookup.target
  336. [ 79.524236] systemd[1]: Unit type .automount is not supported on this system.
  337. [ 79.537555] systemd[1]: Unit boot.mount is bound to inactive unit. Stopping, too.
  338. [ 79.549800] systemd[1]: Found device /sys/devices/soc0/c8000000.sdhci/mmc_host/mmc0/mmc0:59b4/block/mmcblk0/mmcblk0p3.
  339. [ 79.564907] systemd[1]: Found device /dev/disk/by-path/platform-c8000000.sdhci-part3.
  340. [ 79.576973] systemd[1]: Found device /dev/disk/by-uuid/46667750-79e0-4fd9-86ca-e54769557aaa.
  341. [ 79.589729] systemd[1]: Found device /sys/subsystem/rfkill/devices/rfkill0.
  342. [ 79.601359] systemd[1]: Found device /dev/mmcblk0p3.
  343. [ 79.611196] systemd[1]: Mounted /.
  344. [ 79.626314] systemd[1]: Cannot add dependency job for unit display-manager.service, ignoring: Unit display-manager.service failed to load: No such file or directory.
  345. [ 79.658281] systemd[1]: Stopped Load/Save Screen Backlight Brightness of backlight:backlight.
  346. [ 79.676358] systemd[1]: Removed slice system-systemd\x2dbacklight.slice.
  347. [ 79.688071] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
  348. [ 79.707231] systemd[1]: Stopped Load/Save RF Kill Switch Status of rfkill0.
  349. [ 79.723813] systemd[1]: Removed slice system-systemd\x2drfkill.slice.
  350. [ 79.740142] systemd[1]: Stopped target Sound Card.
  351. [ 79.750439] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
  352. [ 79.763266] systemd[1]: Starting Dispatch Password Requests to Console Directory Watch.
  353. [ 79.781013] systemd[1]: Reached target Paths.
  354. [ 79.789923] systemd[1]: Starting Paths.
  355. [ 79.803089] systemd[1]: Created slice Root Slice.
  356. [ 79.812065] systemd[1]: Starting Root Slice.
  357. [ 79.824850] systemd[1]: Listening on Delayed Shutdown Socket.
  358. [ 79.834502] systemd[1]: Starting Delayed Shutdown Socket.
  359. [ 79.848041] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
  360. [ 79.858695] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
  361. [ 79.873046] systemd[1]: Listening on LVM2 metadata daemon socket.
  362. [ 79.882681] systemd[1]: Starting LVM2 metadata daemon socket.
  363. [ 79.896098] systemd[1]: Listening on udev Control Socket.
  364. [ 79.905090] systemd[1]: Starting udev Control Socket.
  365. [ 79.918109] systemd[1]: Created slice User and Session Slice.
  366. [ 79.927261] systemd[1]: Starting User and Session Slice.
  367. [ 79.940500] systemd[1]: Created slice System Slice.
  368. [ 79.949252] systemd[1]: Starting System Slice.
  369. [ 79.960449] systemd[1]: Created slice system-systemd\x2dfsck.slice.
  370. [ 79.969572] systemd[1]: Starting system-systemd\x2dfsck.slice.
  371. [ 79.981913] systemd[1]: Created slice system-serial\x2dgetty.slice.
  372. [ 79.991015] systemd[1]: Starting system-serial\x2dgetty.slice.
  373. [ 80.003282] systemd[1]: Created slice system-getty.slice.
  374. [ 80.011370] systemd[1]: Starting system-getty.slice.
  375. [ 80.022215] systemd[1]: Listening on udev Kernel Socket.
  376. [ 80.030171] systemd[1]: Starting udev Kernel Socket.
  377. [ 80.041162] systemd[1]: Listening on Journal Socket.
  378. [ 80.048718] systemd[1]: Starting Journal Socket.
  379. [ 80.058328] systemd[1]: Activating swap /dev/disk/by-id/mmc-NCard_0x020177ec-part3...
  380. [ 80.072642] systemd[1]: Started File System Check on Root Device.
  381. [ 80.081610] systemd[1]: Mounted POSIX Message Queue File System.
  382. [ 80.082257] Adding 496996k swap on /dev/mmcblk0p3. Priority:-1 extents:1 across:496996k SS
  383. [ 80.101698] systemd[1]: Started Create list of required static device nodes for the current kernel.
  384. [ 80.116464] systemd[1]: Starting Remount Root and Kernel File Systems...
  385. [ 80.131750] systemd[1]: Started Set Up Additional Binary Formats.
  386. [ 80.155338] systemd[1]: Mounted Huge Pages File System.
  387. [ 80.160711] EXT4-fs (mmcblk0p2): re-mounted. Opts: nobarrier
  388. [ 80.175653] systemd[1]: Mounting /sys/kernel/debug...
  389. [ 80.190028] systemd[1]: Starting Rule generator for /dev/root symlink...
  390. [ 80.206516] systemd[1]: Starting Setup Virtual Console...
  391. [ 80.225230] systemd[1]: Starting Load Kernel Modules...
  392. [ 80.243795] systemd[1]: Listening on Journal Audit Socket.
  393. [ 80.257465] systemd[1]: Listening on Journal Socket (/dev/log).
  394. [ 80.267010] systemd[1]: Starting Journal Socket (/dev/log).
  395. [ 80.278954] systemd[1]: Starting Journal Service...
  396. [ 80.298068] systemd[1]: Reached target Slices.
  397. [ 80.305864] systemd[1]: Starting Slices.
  398. [ 80.338250] systemd[1]: Activated swap /dev/disk/by-id/mmc-NCard_0x020177ec-part3.
  399. [ 80.350879] systemd-journald[4929]: Failed to set file attributes: Inappropriate ioctl for device
  400. [ 80.366615] systemd[1]: Mounted /sys/kernel/debug.
  401. [ 80.383064] systemd[1]: Started Remount Root and Kernel File Systems.
  402. [ 80.405081] systemd[1]: Started Rule generator for /dev/root symlink.
  403. [ 80.420966] systemd[1]: Started Setup Virtual Console.
  404. [ 80.430285] systemd[1]: systemd-modules-load.service: main process exited, code=exited, status=1/FAILURE
  405. [ 80.452088] systemd[1]: Failed to start Load Kernel Modules.
  406. [ 80.461132] systemd[1]: Unit systemd-modules-load.service entered failed state.
  407. [ 80.472226] systemd[1]: systemd-modules-load.service failed.
  408. [ 80.549838] systemd[1]: Mounted FUSE Control File System.
  409. [ 80.558599] systemd[1]: Mounted Configuration File System.
  410. [ 80.569998] systemd[1]: Starting udev Coldplug all Devices...
  411. [ 80.590377] systemd[1]: Starting Load/Save Random Seed...
  412. [ 80.609802] systemd[1]: Starting Rebuild Dynamic Linker Cache...
  413. [ 80.626744] systemd[1]: Started First Boot Wizard.
  414. [ 80.642829] systemd[1]: Starting Create System Users...
  415. [ 80.662373] systemd[1]: Starting Rebuild Hardware Database...
  416. [ 80.682669] systemd[1]: Reached target Swap.
  417. [ 80.690233] systemd[1]: Starting Swap.
  418. [ 80.708599] systemd[1]: Started Journal Service.
  419. [ 80.812366] systemd-journald[4929]: Received request to flush runtime journal from PID 1
  420.  
  421. Welcome to openSUSE 20150805 "Tumbleweed" - Kernel 4.1.3-dirty (ttyS0).
  422.  
  423.  
  424. linux login:
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement