API tools faq
paste
rsuinux

log form boot system openwrt r45468

rsuinux
Apr 18th, 2015
397
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 15.58 KB | None | 0 0
raw download clone embed print report
  1. Bienvenue avec minicom 2.7
  2.  
  3. OPTIONS: I18n
  4. Compilé le Jan 1 2014, 09:30:18.
  5. Port /dev/ttyUSB0, 21:49:08
  6.  
  7. Tapez CTRL-A Z pour voir l'aide concernant les touches spéciales
  8.  
  9.  
  10. U-Boot SPL 2015.01 (Apr 16 2015 - 22:50:58)
  11. DRAM: 1024 MiB
  12. CPU: 1008000000Hz, AXI/AHB/APB: 3/2/2
  13.  
  14.  
  15. U-Boot 2015.01 (Apr 16 2015 - 22:50:58) Allwinner Technology
  16.  
  17. CPU: Allwinner A10 (SUN4I)
  18. I2C: ready
  19. DRAM: 1016 MiB
  20. MMC: SUNXI SD/MMC: 0
  21. *** Warning - bad CRC, using default environment
  22.  
  23. Reserved 8192kB of RAM for Framebuffer.
  24. In: serial
  25. Out: serial
  26. Err: serial
  27. SCSI: SUNXI SCSI INIT
  28. SATA link 0 timeout.
  29. AHCI 0001.0100 32 slots 1 ports 3 Gbps 0x1 impl SATA mode
  30. flags: ncq stag pm led clo only pmp pio slum part ccc apst
  31. Net: emac
  32. (Re)start USB...
  33. USB0: USB EHCI 1.00
  34. scanning bus 0 for devices... 2 USB Device(s) found
  35. USB1: USB EHCI 1.00
  36. scanning bus 1 for devices... 1 USB Device(s) found
  37. scanning usb for storage devices... 0 Storage Device(s) found
  38. Hit any key to stop autoboot: 0
  39. switch to partitions #0, OK
  40. mmc0 is current device
  41. Scanning mmc 0...
  42. Found U-Boot script /boot.scr
  43. reading /boot.scr
  44. 377 bytes read in 16 ms (22.5 KiB/s)
  45. ## Executing script at 43100000
  46. reading uImage
  47. 1999248 bytes read in 151 ms (12.6 MiB/s)
  48. reading dtb
  49. 18334 bytes read in 27 ms (663.1 KiB/s)
  50. ## Booting kernel from Legacy Image at 42000000 ...
  51. Image Name: ARM OpenWrt Linux-3.18.11
  52. Image Type: ARM Linux Kernel Image (uncompressed)
  53. Data Size: 1999184 Bytes = 1.9 MiB
  54. Load Address: 40008000
  55. Entry Point: 40008000
  56. Verifying Checksum ... OK
  57. ## Flattened Device Tree blob at 43000000
  58. Booting using the fdt blob at 0x43000000
  59. Loading Kernel Image ... OK
  60. Using Device Tree in place at 43000000, end 4300779d
  61.  
  62. Starting kernel ...
  63.  
  64. [ 0.000000] Booting Linux on physical CPU 0x0
  65. [ 0.000000] Linux version 3.18.11 (openwrt@gb-10) (gcc version 4.8.3 (OpenWrt/Linaro GCC 4.8-2014.04 r45468) ) #1 SMP PREEMPT Fri Apr 17 10:00:58 UTC 2015
  66. [ 0.000000] CPU: ARMv7 Processor [413fc082] revision 2 (ARMv7), cr=10c5387d
  67. [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
  68. [ 0.000000] Machine model: Cubietech Cubieboard
  69. [ 0.000000] Memory policy: Data cache writeback
  70. [ 0.000000] CPU: All CPU(s) started in SVC mode.
  71. [ 0.000000] PERCPU: Embedded 9 pages/cpu @eefed000 s6272 r8192 d22400 u36864
  72. [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 258576
  73. [ 0.000000] Kernel command line: console=ttyS0,115200 earlyprintk rootwait root=/dev/mmcblk0p2
  74. [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
  75. [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
  76. [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
  77. [ 0.000000] Memory: 1025192K/1040384K available (3967K kernel code, 175K rwdata, 1140K rodata, 212K init, 610K bss, 15192K reserved, 262144K highmem)
  78. [ 0.000000] Virtual kernel memory layout:
  79. [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
  80. [ 0.000000] fixmap : 0xffc00000 - 0xffe00000 (2048 kB)
  81. [ 0.000000] vmalloc : 0xf0000000 - 0xff000000 ( 240 MB)
  82. [ 0.000000] lowmem : 0xc0000000 - 0xef800000 ( 760 MB)
  83. [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
  84. [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
  85. [ 0.000000] .text : 0xc0008000 - 0xc0504ef4 (5108 kB)
  86. [ 0.000000] .init : 0xc0505000 - 0xc053a000 ( 212 kB)
  87. [ 0.000000] .data : 0xc053a000 - 0xc0565c38 ( 176 kB)
  88. [ 0.000000] .bss : 0xc0565c38 - 0xc05fe5cc ( 611 kB)
  89. [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
  90. [ 0.000000] Preemptible hierarchical RCU implementation.
  91. [ 0.000000] RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=1.
  92. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1
  93. [ 0.000000] NR_IRQS:16 nr_irqs:16 16
  94. [ 0.000016] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 178956969942ns
  95. [ 0.000245] Console: colour dummy device 80x30
  96. [ 0.000270] Calibrating delay loop... 1001.88 BogoMIPS (lpj=5009408)
  97. [ 0.040076] pid_max: default: 32768 minimum: 301
  98. [ 0.040177] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
  99. [ 0.040189] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
  100. [ 0.040707] CPU: Testing write buffer coherency: ok
  101. [ 0.040948] CPU0: thread -1, cpu 0, socket -1, mpidr 0
  102. [ 0.041013] Setting up static identity map for 0x40011c00 - 0x40011c34
  103. [ 0.080239] Brought up 1 CPUs
  104. [ 0.080254] SMP: Total of 1 processors activated (1001.88 BogoMIPS).
  105. [ 0.080262] CPU: All CPU(s) started in SVC mode.
  106. [ 0.081101] VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 3
  107. [ 0.081407] pinctrl core: initialized pinctrl subsystem
  108. [ 0.081755] regulator-dummy: no parameters
  109. [ 0.086595] NET: Registered protocol family 16
  110. [ 0.087053] DMA: preallocated 256 KiB pool for atomic coherent allocations
  111. [ 0.121263] reg-fixed-voltage ahci-5v: could not find pctldev for node /soc@01c00000/pinctrl@01c20800/ahci_pwr_pin@0, deferring probe
  112. [ 0.121291] platform ahci-5v: Driver reg-fixed-voltage requests probe deferral
  113. [ 0.121319] reg-fixed-voltage usb1-vbus: could not find pctldev for node /soc@01c00000/pinctrl@01c20800/usb1_vbus_pin@0, deferring probe
  114. [ 0.121333] platform usb1-vbus: Driver reg-fixed-voltage requests probe deferral
  115. [ 0.121355] reg-fixed-voltage usb2-vbus: could not find pctldev for node /soc@01c00000/pinctrl@01c20800/usb2_vbus_pin@0, deferring probe
  116. [ 0.121368] platform usb2-vbus: Driver reg-fixed-voltage requests probe deferral
  117. [ 0.121563] vcc3v0: 3000 mV
  118. [ 0.121790] vcc3v3: 3300 mV
  119. [ 0.122024] vcc5v0: 5000 mV
  120. [ 0.122504] SCSI subsystem initialized
  121. [ 0.122914] usbcore: registered new interface driver usbfs
  122. [ 0.122992] usbcore: registered new interface driver hub
  123. [ 0.123086] usbcore: registered new device driver usb
  124. [ 0.123219] Linux video capture interface: v2.00
  125. [ 0.123302] pps_core: LinuxPPS API ver. 1 registered
  126. [ 0.123311] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <[email protected]>
  127. [ 0.123342] PTP clock support registered
  128. [ 0.124388] Switched to clocksource timer
  129. [ 0.131423] NET: Registered protocol family 2
  130. [ 0.132173] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
  131. [ 0.132253] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
  132. [ 0.132363] TCP: Hash tables configured (established 8192 bind 8192)
  133. [ 0.132448] TCP: reno registered
  134. [ 0.132461] UDP hash table entries: 512 (order: 2, 16384 bytes)
  135. [ 0.132493] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
  136. [ 0.132680] NET: Registered protocol family 1
  137. [ 0.133874] futex hash table entries: 256 (order: 2, 16384 bytes)
  138. [ 0.133952] audit: initializing netlink subsys (disabled)
  139. [ 0.134012] audit: type=2000 audit(0.120:1): initialized
  140. [ 0.142908] VFS: Disk quotas dquot_6.5.2
  141. [ 0.143138] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
  142. [ 0.144903] squashfs: version 4.0 (2009/01/31) Phillip Lougher
  143. [ 0.144921] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
  144. [ 0.145681] msgmni has been set to 1490
  145. [ 0.146875] bounce: pool size: 64 pages
  146. [ 0.146892] io scheduler noop registered
  147. [ 0.146904] io scheduler deadline registered
  148. [ 0.146943] io scheduler cfq registered (default)
  149. [ 0.147184] platform 1c13400.phy: Driver sun4i-usb-phy requests probe deferral
  150. [ 0.149275] sun4i-pinctrl 1c20800.pinctrl: initialized sunXi PIO driver
  151. [ 0.192260] Serial: 8250/16550 driver, 16 ports, IRQ sharing enabled
  152. [ 0.195833] console [ttyS0] disabled
  153. [ 0.216092] 1c28000.serial: ttyS0 at MMIO 0x1c28000 (irq = 29, base_baud = 1500000) is a U6_16550A
  154. [ 0.757994] console [ttyS0] enabled
  155. [ 0.763303] 1c0b080.mdio supply phy not found, using dummy regulator
  156. [ 0.769871] libphy: sun4i_mii_bus: probed
  157. [ 0.805107] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  158. [ 0.811637] ehci-platform: EHCI generic platform driver
  159. [ 0.817073] platform 1c14000.usb: Driver ehci-platform requests probe deferral
  160. [ 0.824410] platform 1c1c000.usb: Driver ehci-platform requests probe deferral
  161. [ 0.831710] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
  162. [ 0.837976] ohci-platform: OHCI generic platform driver
  163. [ 0.843305] platform 1c14400.usb: Driver ohci-platform requests probe deferral
  164. [ 0.850631] platform 1c1c400.usb: Driver ohci-platform requests probe deferral
  165. [ 0.858033] usbcore: registered new interface driver usb-storage
  166. [ 0.864277] mousedev: PS/2 mouse device common for all mice
  167. [ 0.875163] axp20x-regulator axp20x-regulator: regulators node not found
  168. [ 0.882039] LDO1: 1300 mV
  169. [ 0.885235] LDO2: at 3000 mV
  170. [ 0.888620] LDO3: at 2275 mV
  171. [ 0.891790] LDO4: at 2800 mV
  172. [ 0.895244] LDO5: at 2800 mV
  173. [ 0.898626] DCDC2: at 1400 mV
  174. [ 0.902089] DCDC3: at 1250 mV
  175. [ 0.905275] axp20x 0-0034: AXP20X driver loaded
  176. [ 0.910705] sunxi-wdt 1c20c90.watchdog: Watchdog enabled (timeout=16 sec, nowayout=0)
  177. [ 0.919207] sunxi-mmc 1c0f000.mmc: No vqmmc regulator found
  178. [ 0.925137] sunxi-mmc 1c0f000.mmc: Got CD GPIO
  179. [ 0.964549] sunxi-mmc 1c0f000.mmc: base:0xf00e4000 irq:19
  180. [ 0.971347] TCP: cubic registered
  181. [ 0.974732] Initializing XFRM netlink socket
  182. [ 0.980093] NET: Registered protocol family 17
  183. [ 0.986703] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this.
  184. [ 0.999372] Bridge firewalling registered
  185. [ 1.003402] 8021q: 802.1Q VLAN Support v1.8
  186. [ 1.007741] Registering SWP/SWPB emulation handler
  187. [ 1.012998] registered taskstats version 1
  188. [ 1.017814] ahci-5v: 5000 mV
  189. [ 1.021145] usb1-vbus: 5000 mV
  190. [ 1.025750] usb2-vbus: 5000 mV
  191. [ 1.031739] ehci-platform 1c14000.usb: EHCI Host Controller
  192. [ 1.037429] ehci-platform 1c14000.usb: new USB bus registered, assigned bus number 1
  193. [ 1.045361] ehci-platform 1c14000.usb: irq 20, io mem 0x01c14000
  194. [ 1.061504] mmc0: host does not support reading read-only switch, assuming write-enable
  195. [ 1.069535] ehci-platform 1c14000.usb: USB 2.0 started, EHCI 1.00
  196. [ 1.075833] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
  197. [ 1.082753] mmc0: new high speed SDHC card at address 0007
  198. [ 1.088262] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  199. [ 1.095907] mmcblk0: mmc0:0007 SD04G 3.67 GiB
  200. [ 1.100836] usb usb1: Product: EHCI Host Controller
  201. [ 1.105831] mmcblk0: p1 p2
  202. [ 1.109260] usb usb1: Manufacturer: Linux 3.18.11 ehci_hcd
  203. [ 1.114832] usb usb1: SerialNumber: 1c14000.usb
  204. [ 1.119871] hub 1-0:1.0: USB hub found
  205. [ 1.123653] hub 1-0:1.0: 1 port detected
  206. [ 1.128242] ehci-platform 1c1c000.usb: EHCI Host Controller
  207. [ 1.133846] ehci-platform 1c1c000.usb: new USB bus registered, assigned bus number 2
  208. [ 1.141775] ehci-platform 1c1c000.usb: irq 23, io mem 0x01c1c000
  209. [ 1.164399] ehci-platform 1c1c000.usb: USB 2.0 started, EHCI 1.00
  210. [ 1.170652] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
  211. [ 1.177455] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  212. [ 1.184684] usb usb2: Product: EHCI Host Controller
  213. [ 1.189558] usb usb2: Manufacturer: Linux 3.18.11 ehci_hcd
  214. [ 1.195050] usb usb2: SerialNumber: 1c1c000.usb
  215. [ 1.200067] hub 2-0:1.0: USB hub found
  216. [ 1.203846] hub 2-0:1.0: 1 port detected
  217. [ 1.208341] ohci-platform 1c14400.usb: Generic Platform OHCI controller
  218. [ 1.215003] ohci-platform 1c14400.usb: new USB bus registered, assigned bus number 3
  219. [ 1.222874] ohci-platform 1c14400.usb: irq 21, io mem 0x01c14400
  220. [ 1.288527] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
  221. [ 1.295333] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  222. [ 1.302547] usb usb3: Product: Generic Platform OHCI controller
  223. [ 1.308822] usb usb3: Manufacturer: Linux 3.18.11 ohci_hcd
  224. [ 1.314305] usb usb3: SerialNumber: 1c14400.usb
  225. [ 1.319348] hub 3-0:1.0: USB hub found
  226. [ 1.323126] hub 3-0:1.0: 1 port detected
  227. [ 1.327815] ohci-platform 1c1c400.usb: Generic Platform OHCI controller
  228. [ 1.334547] ohci-platform 1c1c400.usb: new USB bus registered, assigned bus number 4
  229. [ 1.342425] ohci-platform 1c1c400.usb: irq 24, io mem 0x01c1c400
  230. [ 1.408513] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
  231. [ 1.415317] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  232. [ 1.422532] usb usb4: Product: Generic Platform OHCI controller
  233. [ 1.428578] usb usb4: Manufacturer: Linux 3.18.11 ohci_hcd
  234. [ 1.434060] usb usb4: SerialNumber: 1c1c400.usb
  235. [ 1.439121] hub 4-0:1.0: USB hub found
  236. [ 1.442900] hub 4-0:1.0: 1 port detected
  237. [ 1.446892] usb 1-1: new high-speed USB device number 2 using ehci-platform
  238. [ 1.454313] drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
  239. [ 1.465956] ahci-5v: disabling
  240. [ 1.469058] vcc5v0: disabling
  241. [ 1.472035] vcc3v0: disabling
  242. [ 1.477203] EXT4-fs (mmcblk0p2): couldn't mount as ext3 due to feature incompatibilities
  243. [ 1.486235] EXT4-fs (mmcblk0p2): couldn't mount as ext2 due to feature incompatibilities
  244. [ 1.499735] EXT4-fs (mmcblk0p2): mounted filesystem without journal. Opts: (null)
  245. [ 1.507450] VFS: Mounted root (ext4 filesystem) readonly on device 179:2.
  246. [ 1.514518] Freeing unused kernel memory: 212K (c0505000 - c053a000)
  247. [ 1.631715] init: failed to symlink /tmp -> /var
  248. [ 1.636508] usb 1-1: New USB device found, idVendor=7392, idProduct=7711
  249. [ 1.643207] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
  250. [ 1.650519] init: Console is alive
  251. [ 1.654124] init: - watchdog -
  252. [ 1.658375] usb 1-1: Product: 802.11 n WLAN
  253. [ 1.664977] usb 1-1: Manufacturer: Ralink
  254. [ 1.669311] usb 1-1: SerialNumber: 1.0
  255. [ 2.657971] init: - preinit -
  256. Detected cubieboard // Cubietech Cubieboard
  257. [ 2.717553] random: mktemp urandom read with 7 bits of entropy available
  258. Press the [f] key and hit [enter] to enter failsafe mode
  259. Press the [1], [2], [3] or [4] key and hit [enter] to select the debug level
  260. [ 4.783022] mount_root: mounting /dev/root
  261. [ 4.787769] EXT4-fs (mmcblk0p2): warning: mounting unchecked fs, running e2fsck is recommended
  262. [ 4.805769] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null)
  263. [ 4.820421] procd: - early -
  264. [ 4.823412] procd: - watchdog -
  265. [ 6.315475] procd: - ubus -
  266. [ 7.325239] procd: - init -
  267. Please press Enter to activate this console.
  268. [ 8.464938] NET: Registered protocol family 10
  269. [ 8.484582] ip6_tables: (C) 2000-2006 Netfilter Core Team
  270. [ 8.528109] ip_tables: (C) 2000-2006 Netfilter Core Team
  271. [ 8.552544] nf_conntrack version 0.5.0 (16021 buckets, 64084 max)
  272. [ 8.645052] sun4i-emac 1c0b000.ethernet: eth0: at f01d8000, IRQ 18 MAC: 02:d1:0d:01:ee:e3
  273. [ 8.682559] xt_time: kernel timezone is -0000
  274. [ 8.722663] PPP generic driver version 2.4.2
  275. [ 8.744560] NET: Registered protocol family 24
  276. [ 13.645216] device eth0 entered promiscuous mode
  277. [ 13.654909] IPv6: ADDRCONF(NETDEV_UP): br-lan: link is not ready
  278. [ 15.804409] sun4i-emac 1c0b000.ethernet eth0: Link is Up - 100Mbps/Full - flow control rx/tx
  279. [ 15.812891] br-lan: port 1(eth0) entered forwarding state
  280. [ 15.818351] br-lan: port 1(eth0) entered forwarding state
  281. [ 15.834748] IPv6: ADDRCONF(NETDEV_CHANGE): br-lan: link becomes ready
  282. [ 17.814385] br-lan: port 1(eth0) entered forwarding state
  283. [ 21.176450] random: nonblocking pool is initialized
Advertisement
Add Comment
Please, Sign In to add comment
Public Pastes
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!