API tools faq
paste
Advertisement
Guest User

DAP1620B1-iw list (after mt76 patch)

a guest
Apr 9th, 2023
34
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 9.56 KB | None | 0 0
raw download clone embed print report
  1. root@DAP-1620-B1:~# iw list
  2. Wiphy phy1
  3. wiphy index: 1
  4. max # scan SSIDs: 4
  5. max scan IEs length: 543 bytes
  6. max # sched scan SSIDs: 10
  7. max # match sets: 16
  8. Retry short limit: 7
  9. Retry long limit: 4
  10. Coverage class: 0 (up to 0m)
  11. Device supports AP-side u-APSD.
  12. Device supports T-DLS.
  13. Available Antennas: TX 0x3 RX 0x3
  14. Configured Antennas: TX 0x3 RX 0x3
  15. Supported interface modes:
  16. * IBSS
  17. * managed
  18. * AP
  19. * AP/VLAN
  20. * monitor
  21. * mesh point
  22. * P2P-client
  23. * P2P-GO
  24. Band 2:
  25. Capabilities: 0x1ff
  26. RX LDPC
  27. HT20/HT40
  28. SM Power Save disabled
  29. RX Greenfield
  30. RX HT20 SGI
  31. RX HT40 SGI
  32. TX STBC
  33. RX STBC 1-stream
  34. Max AMSDU length: 3839 bytes
  35. No DSSS/CCK HT40
  36. Maximum RX AMPDU length 65535 bytes (exponent: 0x003)
  37. Minimum RX AMPDU time spacing: No restriction (0x00)
  38. HT TX/RX MCS rate indexes supported: 0-15
  39. VHT Capabilities (0x338001b0):
  40. Max MPDU length: 3895
  41. Supported Channel Width: neither 160 nor 80+80
  42. RX LDPC
  43. short GI (80 MHz)
  44. TX STBC
  45. RX antenna pattern consistency
  46. TX antenna pattern consistency
  47. VHT RX MCS set:
  48. 1 streams: MCS 0-9
  49. 2 streams: MCS 0-9
  50. 3 streams: not supported
  51. 4 streams: not supported
  52. 5 streams: not supported
  53. 6 streams: not supported
  54. 7 streams: not supported
  55. 8 streams: not supported
  56. VHT RX highest supported: 0 Mbps
  57. VHT TX MCS set:
  58. 1 streams: MCS 0-9
  59. 2 streams: MCS 0-9
  60. 3 streams: not supported
  61. 4 streams: not supported
  62. 5 streams: not supported
  63. 6 streams: not supported
  64. 7 streams: not supported
  65. 8 streams: not supported
  66. VHT TX highest supported: 0 Mbps
  67. VHT extended NSS: not supported
  68. Frequencies:
  69. * 5180 MHz [36] (15.0 dBm)
  70. * 5200 MHz [40] (15.0 dBm)
  71. * 5220 MHz [44] (15.0 dBm)
  72. * 5240 MHz [48] (15.0 dBm)
  73. * 5260 MHz [52] (15.0 dBm) (radar detection)
  74. * 5280 MHz [56] (15.0 dBm) (radar detection)
  75. * 5300 MHz [60] (15.0 dBm) (radar detection)
  76. * 5320 MHz [64] (15.0 dBm) (radar detection)
  77. * 5500 MHz [100] (15.0 dBm) (radar detection)
  78. * 5520 MHz [104] (15.0 dBm) (radar detection)
  79. * 5540 MHz [108] (15.0 dBm) (radar detection)
  80. * 5560 MHz [112] (15.0 dBm) (radar detection)
  81. * 5580 MHz [116] (15.0 dBm) (radar detection)
  82. * 5600 MHz [120] (15.0 dBm) (radar detection)
  83. * 5620 MHz [124] (15.0 dBm) (radar detection)
  84. * 5640 MHz [128] (15.0 dBm) (radar detection)
  85. * 5660 MHz [132] (15.0 dBm) (radar detection)
  86. * 5680 MHz [136] (15.0 dBm) (radar detection)
  87. * 5700 MHz [140] (15.0 dBm) (radar detection)
  88. * 5720 MHz [144] (15.0 dBm) (radar detection)
  89. * 5745 MHz [149] (15.0 dBm)
  90. * 5765 MHz [153] (15.0 dBm)
  91. * 5785 MHz [157] (15.0 dBm)
  92. * 5805 MHz [161] (15.0 dBm)
  93. * 5825 MHz [165] (15.0 dBm)
  94. * 5845 MHz [169] (15.0 dBm)
  95. * 5865 MHz [173] (15.0 dBm)
  96. valid interface combinations:
  97. * #{ IBSS } <= 1, #{ managed, AP, mesh point, P2P-client, P2P-GO } <= 16,
  98. total <= 16, #channels <= 1, STA/AP BI must match, radar detect widths: { 20 MHz (no HT), 20 MHz, 40 MHz, 80 MHz, 80+80 MHz, 160 MHz }
  99.  
  100. HT Capability overrides:
  101. * MCS: ff ff ff ff ff ff ff ff ff ff
  102. * maximum A-MSDU length
  103. * supported channel width
  104. * short GI for 40 MHz
  105. * max A-MPDU length exponent
  106. * min MPDU start spacing
  107. max # scan plans: 1
  108. max scan plan interval: 65535
  109. max scan plan iterations: 0
  110. Supported extended features:
  111. * [ VHT_IBSS ]: VHT-IBSS
  112. * [ RRM ]: RRM
  113. * [ SET_SCAN_DWELL ]: scan dwell setting
  114. * [ FILS_STA ]: STA FILS (Fast Initial Link Setup)
  115. * [ CQM_RSSI_LIST ]: multiple CQM_RSSI_THOLD records
  116. * [ CONTROL_PORT_OVER_NL80211 ]: control port over nl80211
  117. * [ TXQS ]: FQ-CoDel-enabled intermediate TXQs
  118. * [ AIRTIME_FAIRNESS ]: airtime fairness scheduling
  119. * [ AQL ]: Airtime Queue Limits (AQL)
  120. * [ CONTROL_PORT_NO_PREAUTH ]: disable pre-auth over nl80211 control port support
  121. * [ DEL_IBSS_STA ]: deletion of IBSS station support
  122. * [ SCAN_FREQ_KHZ ]: scan on kHz frequency support
  123. * [ CONTROL_PORT_OVER_NL80211_TX_STATUS ]: tx status for nl80211 control port support
  124. Wiphy phy0
  125. wiphy index: 0
  126. max # scan SSIDs: 4
  127. max scan IEs length: 2304 bytes
  128. max # sched scan SSIDs: 0
  129. max # match sets: 0
  130. Retry short limit: 7
  131. Retry long limit: 4
  132. Coverage class: 0 (up to 0m)
  133. Device supports AP-side u-APSD.
  134. Device supports T-DLS.
  135. Available Antennas: TX 0x3 RX 0x3
  136. Configured Antennas: TX 0x3 RX 0x3
  137. Supported interface modes:
  138. * IBSS
  139. * managed
  140. * AP
  141. * AP/VLAN
  142. * monitor
  143. * mesh point
  144. * P2P-client
  145. * P2P-GO
  146. Band 1:
  147. Capabilities: 0x1ff
  148. RX LDPC
  149. HT20/HT40
  150. SM Power Save disabled
  151. RX Greenfield
  152. RX HT20 SGI
  153. RX HT40 SGI
  154. TX STBC
  155. RX STBC 1-stream
  156. Max AMSDU length: 3839 bytes
  157. No DSSS/CCK HT40
  158. Maximum RX AMPDU length 65535 bytes (exponent: 0x003)
  159. Minimum RX AMPDU time spacing: No restriction (0x00)
  160. HT TX/RX MCS rate indexes supported: 0-15
  161. Frequencies:
  162. * 2412 MHz [1] (19.0 dBm)
  163. * 2417 MHz [2] (19.0 dBm)
  164. * 2422 MHz [3] (19.0 dBm)
  165. * 2427 MHz [4] (19.0 dBm)
  166. * 2432 MHz [5] (19.0 dBm)
  167. * 2437 MHz [6] (19.0 dBm)
  168. * 2442 MHz [7] (19.0 dBm)
  169. * 2447 MHz [8] (19.0 dBm)
  170. * 2452 MHz [9] (19.0 dBm)
  171. * 2457 MHz [10] (19.0 dBm)
  172. * 2462 MHz [11] (19.0 dBm)
  173. * 2467 MHz [12] (19.0 dBm)
  174. * 2472 MHz [13] (19.0 dBm)
  175. * 2484 MHz [14] (disabled)
  176. valid interface combinations:
  177. * #{ IBSS } <= 1, #{ managed, AP, mesh point, P2P-client, P2P-GO } <= 16,
  178. total <= 16, #channels <= 1, STA/AP BI must match, radar detect widths: { 20 MHz (no HT), 20 MHz, 40 MHz, 80 MHz, 80+80 MHz, 160 MHz }
  179.  
  180. HT Capability overrides:
  181. * MCS: ff ff ff ff ff ff ff ff ff ff
  182. * maximum A-MSDU length
  183. * supported channel width
  184. * short GI for 40 MHz
  185. * max A-MPDU length exponent
  186. * min MPDU start spacing
  187. max # scan plans: 1
  188. max scan plan interval: 0
  189. max scan plan iterations: 0
  190. Supported extended features:
  191. * [ VHT_IBSS ]: VHT-IBSS
  192. * [ RRM ]: RRM
  193. * [ SET_SCAN_DWELL ]: scan dwell setting
  194. * [ FILS_STA ]: STA FILS (Fast Initial Link Setup)
  195. * [ CQM_RSSI_LIST ]: multiple CQM_RSSI_THOLD records
  196. * [ CONTROL_PORT_OVER_NL80211 ]: control port over nl80211
  197. * [ TXQS ]: FQ-CoDel-enabled intermediate TXQs
  198. * [ AIRTIME_FAIRNESS ]: airtime fairness scheduling
  199. * [ AQL ]: Airtime Queue Limits (AQL)
  200. * [ CONTROL_PORT_NO_PREAUTH ]: disable pre-auth over nl80211 control port support
  201. * [ DEL_IBSS_STA ]: deletion of IBSS station support
  202. * [ SCAN_FREQ_KHZ ]: scan on kHz frequency support
  203. * [ CONTROL_PORT_OVER_NL80211_TX_STATUS ]: tx status for nl80211 control port support
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement
Public Pastes
Advertisement
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!