API tools faq
paste
Guest User

Untitled

a guest
Jul 22nd, 2018
148
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 82.15 KB | None | 0 0
raw download clone embed print report
  1. <6>[ 0.000000] Booting Linux on physical CPU 0x0
  2. <6>[ 0.000000] Initializing cgroup subsys cpu
  3. <6>[ 0.000000] Initializing cgroup subsys cpuacct
  4. <5>[ 0.000000] Linux version 3.10.49-g5c67a92-00001-g9d5501c (release369@yep) (gcc version 4.8 (GCC) ) #1 SMP PREEMPT Wed Aug 24 23:45:59 CST 2016
  5. <4>[ 0.000000] CPU: ARMv7 Processor [410fc075] revision 5 (ARMv7), cr=10c5387d
  6. <4>[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
  7. <6>[ 0.000000] Machine: Qualcomm Technologies, Inc. MSM 8909 (Flattened Device Tree), model: Qualcomm Technologies, Inc. MSM8909 WCD9326 Reference Board MTP
  8. <6>[ 0.000000] cma: Found external_image__region@0, memory base 0x87a00000, size 6 MiB, limit 0xffffffff
  9. <6>[ 0.000000] cma: Found modem_adsp_region@0, memory base 0x88000000, size 85 MiB, limit 0xffffffff
  10. <6>[ 0.000000] cma: Found pheripheral_region@0, memory base 0x8d500000, size 5 MiB, limit 0xffffffff
  11. <6>[ 0.000000] cma: Found venus_qseecom_region@0, memory base 0x00000000, size 6 MiB, limit 0x90000000
  12. <6>[ 0.000000] cma: Found audio_region@0, memory base 0x00000000, size 3 MiB, limit 0xffffffff
  13. <6>[ 0.000000] cma: Found splash_region@83000000, memory base 0x83000000, size 12 MiB, limit 0xffffffff
  14. <6>[ 0.000000] cma: CMA: reserved 6 MiB at 0x87a00000 for external_image_mem
  15. <6>[ 0.000000] cma: CMA: reserved 85 MiB at 0x88000000 for modem_adsp_mem
  16. <6>[ 0.000000] cma: CMA: reserved 5 MiB at 0x8d500000 for peripheral_mem
  17. <6>[ 0.000000] cma: CMA: reserved 8 MiB at 0x8f800000 for venus_qseecom_mem
  18. <6>[ 0.000000] cma: CMA: reserved 4 MiB at 0xbfc00000 for audio_mem
  19. <6>[ 0.000000] cma: CMA: reserved 12 MiB at 0x83000000 for cont_splash_mem
  20. <6>[ 0.000000] cma: CMA: reserved 8 MiB at 0xaf000000 for default region
  21. <4>[ 0.000000] Memory policy: ECC disabled, Data cache writealloc
  22. <7>[ 0.000000] On node 0 totalpages: 237568
  23. <7>[ 0.000000] free_area_init_node: node 0, pgdat c11d3480, node_mem_map c135a000
  24. <7>[ 0.000000] Normal zone: 1710 pages used for memmap
  25. <7>[ 0.000000] Normal zone: 0 pages reserved
  26. <7>[ 0.000000] Normal zone: 169984 pages, LIFO batch:31
  27. <7>[ 0.000000] HighMem zone: 594 pages used for memmap
  28. <7>[ 0.000000] HighMem zone: 67584 pages, LIFO batch:15
  29. <6>[ 0.000000] PERCPU: Embedded 13 pages/cpu @c1ca2000 s32704 r8192 d12352 u53248
  30. <7>[ 0.000000] pcpu-alloc: s32704 r8192 d12352 u53248 alloc=13*4096
  31. <7>[ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
  32. <4>[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 235858
  33. <5>[ 0.000000] Kernel command line: sched_enable_hmp=1 console=ttyHSL0,115200,n8 androidboot.console=ttyHSL0 androidboot.hardware=qcom msm_rtb.filter=0x237 ehci-hcd.park=3 androidboot.bootdevice=7824900.sdhci lpm_levels.sleep_disabled=1 earlyprintk androidboot.bootdevice=7824900.sdhci androidboot.serialno=9aadd4f9 gpt androidboot.baseband=apq mdss_mdp3.panel=1:dsi:0:qcom,mdss_dsi_nt35521s_xingyuan_wxga_video:1:none
  34. <6>[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
  35. <6>[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
  36. <6>[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
  37. <4>[ 0.000000] Memory: 884344K/950272K available (10532K kernel code, 1057K rwdata, 4456K rodata, 1087K init, 1285K bss, 65928K reserved, 266240K highmem)
  38. <5>[ 0.000000] Virtual kernel memory layout:
  39. <5>[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
  40. <5>[ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
  41. <5>[ 0.000000] vmalloc : 0xf0000000 - 0xff000000 ( 240 MB)
  42. <5>[ 0.000000] lowmem : 0xc0000000 - 0xef800000 ( 760 MB)
  43. <5>[ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
  44. <5>[ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
  45. <5>[ 0.000000] .text : 0xc0008000 - 0xc0fa3068 (15981 kB)
  46. <5>[ 0.000000] .init : 0xc1000000 - 0xc110ffc0 (1088 kB)
  47. <5>[ 0.000000] .data : 0xc1110000 - 0xc1218788 (1058 kB)
  48. <5>[ 0.000000] .bss : 0xc121884c - 0xc1359d38 (1286 kB)
  49. <6>[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
  50. <6>[ 0.000000] HMP scheduling enabled.
  51. <6>[ 0.000000] Preemptible hierarchical RCU implementation.
  52. <6>[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
  53. <6>[ 0.000000] NR_IRQS:16 nr_irqs:16 16
  54. <6>[ 0.000000] Architected cp15 and mmio timer(s) running at 19.20MHz (virt/virt).
  55. <6>[ 0.000000] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 3579139424256ns
  56. <6>[ 0.000000] Switching to timer-based delay loop
  57. <6>[ 0.000000] sched_clock: 32 bits at 19MHz, resolution 52ns, wraps every 223696213963ns
  58. <6>[ 0.000000] Console: colour dummy device 80x30
  59. <6>[ 0.000780] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=192000)
  60. <6>[ 0.000795] pid_max: default: 32768 minimum: 301
  61. <6>[ 0.000999] Security Framework initialized
  62. <6>[ 0.001042] SELinux: Initializing.
  63. <7>[ 0.001101] SELinux: Starting in permissive mode
  64. <6>[ 0.001166] Mount-cache hash table entries: 512
  65. <6>[ 0.002279] Initializing cgroup subsys debug
  66. <6>[ 0.002296] Initializing cgroup subsys freezer
  67. <6>[ 0.002340] CPU: Testing write buffer coherency: ok
  68. <3>[ 0.002748] /cpus/cpu@0 missing clock-frequency property
  69. <3>[ 0.002768] /cpus/cpu@1 missing clock-frequency property
  70. <3>[ 0.002784] /cpus/cpu@2 missing clock-frequency property
  71. <3>[ 0.002802] /cpus/cpu@3 missing clock-frequency property
  72. <6>[ 0.002817] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
  73. <6>[ 0.002925] Setting up static identity map for 0xc0a2b878 - 0xc0a2b8d0
  74. <6>[ 0.004146] ftrace: Allocated trace_printk buffers
  75. <6>[ 0.021527] MSM Memory Dump base table set up
  76. <6>[ 0.021569] MSM Memory Dump apps data table set up
  77. <6>[ 0.021609] Configuring XPU violations to be fatal errors
  78. <6>[ 0.023131] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
  79. <6>[ 0.024672] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
  80. <6>[ 0.026132] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
  81. <6>[ 0.026305] Brought up 4 CPUs
  82. <6>[ 0.026333] SMP: Total of 4 processors activated (153.60 BogoMIPS).
  83. <6>[ 0.026341] CPU: All CPU(s) started in SVC mode.
  84. <6>[ 0.042767] VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 5
  85. <4>[ 0.042798] ------------[ cut here ]------------
  86. <4>[ 0.042821] WARNING: at /mnt/sdb/release369/scmworkspace/QL6505/ap/kernel/fs/proc/generic.c:102 __xlate_proc_name+0xa0/0xb4()
  87. <4>[ 0.042830] name 'cpu/vfp_bounce'
  88. <4>[ 0.042837] Modules linked in:
  89. <4>[ 0.042853] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 3.10.49-g5c67a92-00001-g9d5501c #1
  90. <4>[ 0.042889] [<c010bcb4>] (unwind_backtrace+0x0/0x11c) from [<c0109868>] (show_stack+0x10/0x14)
  91. <4>[ 0.042916] [<c0109868>] (show_stack+0x10/0x14) from [<c0121038>] (warn_slowpath_common+0x4c/0x6c)
  92. <4>[ 0.042940] [<c0121038>] (warn_slowpath_common+0x4c/0x6c) from [<c0121084>] (warn_slowpath_fmt+0x2c/0x3c)
  93. <4>[ 0.042963] [<c0121084>] (warn_slowpath_fmt+0x2c/0x3c) from [<c0245cf0>] (__xlate_proc_name+0xa0/0xb4)
  94. <4>[ 0.042983] [<c0245cf0>] (__xlate_proc_name+0xa0/0xb4) from [<c0245d50>] (__proc_create+0x4c/0xdc)
  95. <4>[ 0.043003] [<c0245d50>] (__proc_create+0x4c/0xdc) from [<c024611c>] (proc_create_data+0x58/0x98)
  96. <4>[ 0.043025] [<c024611c>] (proc_create_data+0x58/0x98) from [<c1002e40>] (vfp_init+0x16c/0x1d8)
  97. <4>[ 0.043047] [<c1002e40>] (vfp_init+0x16c/0x1d8) from [<c0100608>] (do_one_initcall+0xb8/0x160)
  98. <4>[ 0.043069] [<c0100608>] (do_one_initcall+0xb8/0x160) from [<c1000bdc>] (kernel_init_freeable+0x108/0x1cc)
  99. <4>[ 0.043092] [<c1000bdc>] (kernel_init_freeable+0x108/0x1cc) from [<c0a137a8>] (kernel_init+0x8/0xe4)
  100. <4>[ 0.043114] [<c0a137a8>] (kernel_init+0x8/0xe4) from [<c0105f58>] (ret_from_fork+0x14/0x3c)
  101. <4>[ 0.043159] ---[ end trace da227214a82491b7 ]---
  102. <3>[ 0.043168] Failed to create procfs node for VFP bounce reporting
  103. <6>[ 0.045473] pinctrl core: initialized pinctrl subsystem
  104. <6>[ 0.045888] regulator-dummy: no parameters
  105. <6>[ 0.047110] NET: Registered protocol family 16
  106. <6>[ 0.050073] DMA: preallocated 256 KiB pool for atomic coherent allocations
  107. <4>[ 0.050572] register_hardware_info:hardware id=4, name=SGM3780-2MHz-1.5A-led-flash-driver
  108. <4>[ 0.050590] register_hardware_info:hardware id=13, name=Host SW:3.2.3.172, FW:00083, HW:WCN v2.0
  109. <4>[ 0.050605] register_hardware_info:hardware id=14, name=HW:WCN3620 v4.0
  110. <3>[ 0.106468] spmi_pmic_arb 200f000.qcom,spmi: PMIC Arb Version-2 0x20010000
  111. <3>[ 0.109450] spmi spmi-0: of_spmi modalias failure on /soc/qcom,spmi@200f000/qcom,pm8916@0/qcom,leds@a300
  112. <3>[ 0.109467] spmi spmi-0: of_spmi_walk_slave_container: unable to create device for node /soc/qcom,spmi@200f000/qcom,pm8916@0/qcom,leds@a300
  113. <6>[ 0.113282] msm_watchdog b017000.qcom,wdt: wdog absent resource not present
  114. <6>[ 0.113554] msm_watchdog b017000.qcom,wdt: MSM Watchdog Initialized
  115. <6>[ 0.115511] cma: Assigned CMA region at 0 to 1de0000.qcom,venus device
  116. <6>[ 0.118864] cma: Assigned CMA region at 0 to a21b000.qcom,pronto device
  117. <6>[ 0.119171] cma: Assigned CMA region at 0 to 4080000.qcom,mss device
  118. <6>[ 0.119858] mem_acc_corner: 0 <--> 0 mV
  119. <7>[ 0.126772] gpiochip_find_base: found new base at 911
  120. <7>[ 0.126902] gpiochip_add: registered GPIOs 911 to 1023 on device: msm_tlmm_gpio
  121. <6>[ 0.130032] KPI: Bootloader start count = 21987
  122. <6>[ 0.130045] KPI: Bootloader end count = 219260
  123. <6>[ 0.130054] KPI: Bootloader display count = 82429
  124. <6>[ 0.130062] KPI: Bootloader load kernel count = 2490
  125. <6>[ 0.130071] KPI: Kernel MPM timestamp = 247427
  126. <6>[ 0.130079] KPI: Kernel MPM Clock frequency = 32768
  127. <6>[ 0.130106] socinfo_print: v10, id=265, ver=2.0, raw_id=2408, raw_ver=1, hw_plat=11, hw_plat_ver=65536
  128. <6>[ 0.130106] accessory_chip=0, hw_plat_subtype=8, pmic_model=65547, pmic_die_revision=131072 foundry_id=2 serial_number=254304247
  129. <3>[ 0.131032] smd_channel_probe_worker: allocation table not initialized
  130. <3>[ 0.131177] smd_channel_probe_worker: allocation table not initialized
  131. <6>[ 0.137312] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
  132. <6>[ 0.137327] hw-breakpoint: maximum watchpoint size is 8 bytes.
  133. <3>[ 0.137837] msm_mpm_dev_probe(): Cannot get clk resource for XO
  134. <6>[ 0.137866] platform 601d0.qcom,mpm: Driver mpm-v2 requests probe deferral
  135. <6>[ 0.139454] 8916_s1_corner: 0 <--> 0 mV at 0 mV normal idle
  136. <6>[ 0.140018] 8916_s1_corner_ao: 0 <--> 0 mV at 0 mV normal idle
  137. <6>[ 0.140555] 8916_s1_floor_corner: 0 <--> 0 mV at 0 mV normal idle
  138. <6>[ 0.141071] 8916_s3: 1200 <--> 1300 mV at 1200 mV normal idle
  139. <6>[ 0.141585] 8916_s4: 1800 <--> 2100 mV at 1800 mV normal idle
  140. <6>[ 0.142076] 8916_l1: 1225 mV normal idle
  141. <6>[ 0.142591] 8916_l2: 1200 mV normal idle
  142. <6>[ 0.143081] 8916_l3: 500 <--> 1287 mV at 0 mV normal idle
  143. <6>[ 0.143559] 8916_l3_corner_ao: 0 <--> 0 mV at 0 mV normal idle
  144. <6>[ 0.144041] 8916_l3_corner_so: 0 <--> 0 mV at 0 mV normal idle
  145. <6>[ 0.144529] 8916_l4: 2050 mV normal idle
  146. <6>[ 0.145074] 8916_l5: 1800 mV normal idle
  147. <6>[ 0.145582] 8916_l6: 1800 mV normal idle
  148. <6>[ 0.146128] 8916_l7: 1800 mV normal idle
  149. <6>[ 0.146620] 8916_l7_ao: 1800 mV normal idle
  150. <6>[ 0.147089] 8916_l7_so: 1800 mV normal idle
  151. <6>[ 0.147640] 8916_l8: 2850 <--> 2900 mV at 2850 mV normal idle
  152. <6>[ 0.148155] 8916_l9: 3300 mV normal idle
  153. <6>[ 0.148688] 8916_l10: 2700 <--> 2800 mV at 2700 mV normal idle
  154. <6>[ 0.149228] 8916_l11: 1800 <--> 2950 mV at 1800 mV normal idle
  155. <6>[ 0.149736] 8916_l12: 1800 <--> 2950 mV at 1800 mV normal idle
  156. <6>[ 0.150274] 8916_l13: 3075 mV normal idle
  157. <6>[ 0.150898] 8916_l14: 1800 <--> 3300 mV at 1800 mV normal idle
  158. <6>[ 0.151417] 8916_l15: 1800 <--> 3300 mV at 1800 mV normal idle
  159. <6>[ 0.151976] 8916_l16: 1800 <--> 3300 mV at 1800 mV normal idle
  160. <6>[ 0.152495] 8916_l17: 2850 mV normal idle
  161. <6>[ 0.153040] 8916_l18: 2700 mV normal idle
  162. <6>[ 0.153689] 8916_s2: 1050 <--> 1350 mV at 1225 mV
  163. <6>[ 0.153849] spm_regulator_probe: name=8916_s2, range=LV, voltage=1225000 uV, mode=PWM, step rate=1200 uV/us
  164. <6>[ 0.154504] cpr_efuse_init: apc_corner: efuse_addr = 0x00058000 (len=0x1000)
  165. <6>[ 0.154557] cpr_read_fuse_revision: apc_corner: fuse revision = 3
  166. <6>[ 0.154578] cpr_parse_speed_bin_fuse: apc_corner: [row: 1]: 0x68f051220f285ff7, speed_bits = 0
  167. <6>[ 0.154682] cpr_pvs_init: apc_corner: pvs voltage: [1050000 1075000 1350000] uV
  168. <6>[ 0.154695] cpr_pvs_init: apc_corner: ceiling voltage: [1050000 1225000 1350000] uV
  169. <6>[ 0.154708] cpr_pvs_init: apc_corner: floor voltage: [1050000 1050000 1155000] uV
  170. <6>[ 0.154965] cpr_init_cpr_efuse: apc_corner: [row:26] = 0x588c020300c128e1
  171. <6>[ 0.154990] cpr_init_cpr_efuse: apc_corner: CPR disable fuse = 0
  172. <6>[ 0.155006] cpr_init_cpr_efuse: apc_corner: Corner[1]: ro_sel = 2, target quot = 768
  173. <6>[ 0.155020] cpr_init_cpr_efuse: apc_corner: Corner[2]: ro_sel = 2, target quot = 768
  174. <6>[ 0.155035] cpr_init_cpr_efuse: apc_corner: Corner[3]: ro_sel = 2, target quot = 1187
  175. <6>[ 0.155099] cpr_get_corner_quot_adjustment: apc_corner: fuse corner 2 quotient adjustment scaling factor: 0.000
  176. <6>[ 0.155112] cpr_get_corner_quot_adjustment: apc_corner: fuse corner 3 quotient adjustment scaling factor: 0.897
  177. <6>[ 0.155129] cpr_get_corner_quot_adjustment: apc_corner: adjusted quotient[1] = 768
  178. <6>[ 0.155140] cpr_get_corner_quot_adjustment: apc_corner: adjusted quotient[2] = 768
  179. <6>[ 0.155151] cpr_get_corner_quot_adjustment: apc_corner: adjusted quotient[3] = 768
  180. <6>[ 0.155161] cpr_get_corner_quot_adjustment: apc_corner: adjusted quotient[4] = 768
  181. <6>[ 0.155171] cpr_get_corner_quot_adjustment: apc_corner: adjusted quotient[5] = 946
  182. <6>[ 0.155181] cpr_get_corner_quot_adjustment: apc_corner: adjusted quotient[6] = 1032
  183. <6>[ 0.155191] cpr_get_corner_quot_adjustment: apc_corner: adjusted quotient[7] = 1118
  184. <6>[ 0.155202] cpr_get_corner_quot_adjustment: apc_corner: adjusted quotient[8] = 1170
  185. <6>[ 0.155212] cpr_get_corner_quot_adjustment: apc_corner: adjusted quotient[9] = 1187
  186. <6>[ 0.155341] cpr_init_cpr_parameters: apc_corner: up threshold = 0, down threshold = 2
  187. <6>[ 0.155371] cpr_init_cpr_parameters: apc_corner: CPR is enabled by default.
  188. <6>[ 0.155386] cpr_config: apc_corner: Timer count: 0x17700 (for 5000 us)
  189. <6>[ 0.155756] apc_corner: 0 <--> 0 mV
  190. <6>[ 0.156730] i2c-msm-v2 78b6000.i2c: probing driver i2c-msm-v2
  191. <3>[ 0.156812] i2c-msm-v2 78b6000.i2c: error on clk_get(core_clk):-517
  192. <3>[ 0.156829] i2c-msm-v2 78b6000.i2c: error probe() failed with err:-517
  193. <6>[ 0.156862] platform 78b6000.i2c: Driver i2c-msm-v2 requests probe deferral
  194. <6>[ 0.157089] i2c-msm-v2 78b8000.i2c: probing driver i2c-msm-v2
  195. <3>[ 0.157152] i2c-msm-v2 78b8000.i2c: error on clk_get(core_clk):-517
  196. <3>[ 0.157167] i2c-msm-v2 78b8000.i2c: error probe() failed with err:-517
  197. <6>[ 0.157193] platform 78b8000.i2c: Driver i2c-msm-v2 requests probe deferral
  198. <6>[ 0.157402] i2c-msm-v2 78b9000.i2c: probing driver i2c-msm-v2
  199. <3>[ 0.157462] i2c-msm-v2 78b9000.i2c: error on clk_get(core_clk):-517
  200. <3>[ 0.157478] i2c-msm-v2 78b9000.i2c: error probe() failed with err:-517
  201. <6>[ 0.157502] platform 78b9000.i2c: Driver i2c-msm-v2 requests probe deferral
  202. <6>[ 0.157709] i2c-msm-v2 78b7000.i2c: probing driver i2c-msm-v2
  203. <3>[ 0.157770] i2c-msm-v2 78b7000.i2c: error on clk_get(core_clk):-517
  204. <3>[ 0.157785] i2c-msm-v2 78b7000.i2c: error probe() failed with err:-517
  205. <6>[ 0.157809] platform 78b7000.i2c: Driver i2c-msm-v2 requests probe deferral
  206. <6>[ 0.158013] i2c-msm-v2 78b5000.i2c: probing driver i2c-msm-v2
  207. <3>[ 0.158073] i2c-msm-v2 78b5000.i2c: error on clk_get(core_clk):-517
  208. <3>[ 0.158089] i2c-msm-v2 78b5000.i2c: error probe() failed with err:-517
  209. <6>[ 0.158114] platform 78b5000.i2c: Driver i2c-msm-v2 requests probe deferral
  210. <6>[ 0.161048] msm_thermal:vdd_restriction_reg_init Defer vdd rstr freq init.
  211. <6>[ 0.162340] sps:sps is ready.
  212. <6>[ 0.171570] qcom,rpmcc-8909 1800000.qcom,rpmcc: Registered RPM clocks.
  213. <6>[ 0.182363] qcom,gcc-8909 1800000.qcom,gcc: Registered GCC clocks
  214. <6>[ 0.183454] clock-a7 b011050.qcom,clock-a7: Speed bin: 0 PVS Version: 0
  215. <6>[ 0.185744] i2c-msm-v2 78b6000.i2c: probing driver i2c-msm-v2
  216. <3>[ 0.185842] AXI: msm_bus_scale_register_client(): msm_bus_scale_register_client: Bus driver not ready.
  217. <6>[ 0.185857] i2c-msm-v2 78b6000.i2c: msm_bus_scale_register_client(mstr-id:86):0 (not a problem)
  218. <6>[ 0.187784] i2c-msm-v2 78b8000.i2c: probing driver i2c-msm-v2
  219. <3>[ 0.187872] AXI: msm_bus_scale_register_client(): msm_bus_scale_register_client: Bus driver not ready.
  220. <6>[ 0.187887] i2c-msm-v2 78b8000.i2c: msm_bus_scale_register_client(mstr-id:86):0 (not a problem)
  221. <6>[ 0.189134] i2c-msm-v2 78b9000.i2c: probing driver i2c-msm-v2
  222. <3>[ 0.189217] AXI: msm_bus_scale_register_client(): msm_bus_scale_register_client: Bus driver not ready.
  223. <6>[ 0.189233] i2c-msm-v2 78b9000.i2c: msm_bus_scale_register_client(mstr-id:86):0 (not a problem)
  224. <6>[ 0.191484] i2c-msm-v2 78b7000.i2c: probing driver i2c-msm-v2
  225. <3>[ 0.191570] AXI: msm_bus_scale_register_client(): msm_bus_scale_register_client: Bus driver not ready.
  226. <6>[ 0.191585] i2c-msm-v2 78b7000.i2c: msm_bus_scale_register_client(mstr-id:86):0 (not a problem)
  227. <6>[ 0.194049] i2c-msm-v2 78b5000.i2c: probing driver i2c-msm-v2
  228. <3>[ 0.194135] AXI: msm_bus_scale_register_client(): msm_bus_scale_register_client: Bus driver not ready.
  229. <6>[ 0.194151] i2c-msm-v2 78b5000.i2c: msm_bus_scale_register_client(mstr-id:86):0 (not a problem)
  230. <6>[ 0.230351] bio: create slab <bio-0> at 0
  231. <5>[ 0.233049] SCSI subsystem initialized
  232. <6>[ 0.233733] usbcore: registered new interface driver usbfs
  233. <6>[ 0.233803] usbcore: registered new interface driver hub
  234. <6>[ 0.234003] usbcore: registered new device driver usb
  235. <6>[ 0.234135] media: Linux media interface: v0.10
  236. <6>[ 0.234196] Linux video capture interface: v2.00
  237. <6>[ 0.235626] cma: Assigned CMA region at 0 to 1b.qcom,ion-heap device
  238. <6>[ 0.235838] cma: Assigned CMA region at 0 to 1c.qcom,ion-heap device
  239. <6>[ 0.236016] cma: Assigned CMA region at 0 to 1a.qcom,ion-heap device
  240. <6>[ 0.236250] ION heap system created
  241. <6>[ 0.236402] ION heap kmalloc created
  242. <6>[ 0.236420] ION heap qsecom created at 0x8f800000 with size 600000
  243. <6>[ 0.236434] ION heap audio created at 0xbfc00000 with size 314000
  244. <6>[ 0.236448] ION heap pil_2 created at 0x88000000 with size 5500000
  245. <3>[ 0.236838] msm_bus_fabric_init_driver
  246. <3>[ 0.237019] msm_bus_device 580000.ad-hoc-bus: Dev 0
  247. <6>[ 0.237039] msm_bus_device 580000.ad-hoc-bus: Vrail-comp is missing, default to 100
  248. <6>[ 0.237169] msm_bus_device 580000.ad-hoc-bus: msmbus_coresight initialized
  249. <3>[ 0.237196] msm_bus_device 580000.ad-hoc-bus: Dev 4096
  250. <6>[ 0.237211] msm_bus_device 580000.ad-hoc-bus: Util-fact is missing, default to 100
  251. <6>[ 0.237220] msm_bus_device 580000.ad-hoc-bus: Vrail-comp is missing, default to 100
  252. <6>[ 0.237314] msm_bus_device 580000.ad-hoc-bus: msmbus_coresight initialized
  253. <3>[ 0.237345] msm_bus_device 580000.ad-hoc-bus: Dev 1024
  254. <6>[ 0.237360] msm_bus_device 580000.ad-hoc-bus: Util-fact is missing, default to 100
  255. <6>[ 0.237370] msm_bus_device 580000.ad-hoc-bus: Vrail-comp is missing, default to 100
  256. <6>[ 0.237482] msm_bus_device 580000.ad-hoc-bus: msmbus_coresight initialized
  257. <3>[ 0.237508] msm_bus_device 580000.ad-hoc-bus: Dev 2048
  258. <6>[ 0.237523] msm_bus_device 580000.ad-hoc-bus: Vrail-comp is missing, default to 100
  259. <4>[ 0.237551] msm_bus_device 580000.ad-hoc-bus: Coresight support absent for bus: 2048
  260. <3>[ 0.239766] msm_bus_init_clk: Valid node clk node 0 ctx 0
  261. <3>[ 0.239773] msm_bus_init_clk: Valid node clk node 0 ctx 1msm_bus_init_clk: Valid node clk node 4096 ctx 0
  262. <3>[ 0.239849] msm_bus_init_clk: Valid node clk node 4096 ctx 1msm_bus_init_clk: Valid node clk node 1024 ctx 0
  263. <3>[ 0.239930] msm_bus_init_clk: Valid node clk node 1024 ctx 1msm_bus_init_clk: Valid Iface clk node 1024
  264. <3>[ 0.239993] msm_bus_init_clk: Valid node clk node 2048 ctx 0msm_bus_init_clk: Valid node clk node 2048 ctx 1
  265. <6>[ 0.249131] gdsc_venus: no parameters
  266. <6>[ 0.249408] gdsc_mdss: no parameters
  267. <6>[ 0.249679] gdsc_vfe: no parameters
  268. <6>[ 0.249896] gdsc_oxili_gx: no parameters
  269. <6>[ 0.250135] gdsc_venus_core0: fast normal
  270. <6>[ 0.250988] mdss_pll_probe: MDSS pll label = MDSS DSI 0 PLL
  271. <6>[ 0.251747] dsi_pll_clock_register_lpm: Registered DSI PLL clocks successfully
  272. <6>[ 0.252625] msm_iommu 1f00000.qcom,iommu: device gfx_iommu (model: 500) mapped at f0320000, with 2 ctx banks
  273. <6>[ 0.253282] msm_iommu 1e00000.qcom,iommu: device apps_iommu (model: 500) mapped at f0380000, with 22 ctx banks
  274. <6>[ 0.258060] msm_iommu_ctx 1f09000.qcom,iommu-ctx: context gfx3d_user using bank 1
  275. <6>[ 0.258190] msm_iommu_ctx 1f0a000.qcom,iommu-ctx: context gfx3d_priv using bank 2
  276. <6>[ 0.258322] msm_iommu_ctx 1e22000.qcom,iommu-ctx: context MSA0_Audio using bank 2
  277. <6>[ 0.258443] msm_iommu_ctx 1e23000.qcom,iommu-ctx: context vfe using bank 3
  278. <6>[ 0.258561] msm_iommu_ctx 1e24000.qcom,iommu-ctx: context mdp_0 using bank 4
  279. <6>[ 0.258677] msm_iommu_ctx 1e25000.qcom,iommu-ctx: context venus_ns using bank 5
  280. <6>[ 0.258792] msm_iommu_ctx 1e27000.qcom,iommu-ctx: context mDSP using bank 7
  281. <6>[ 0.258909] msm_iommu_ctx 1e28000.qcom,iommu-ctx: context gss using bank 8
  282. <6>[ 0.259036] msm_iommu_ctx 1e29000.qcom,iommu-ctx: context a2 using bank 9
  283. <6>[ 0.259154] msm_iommu_ctx 1e32000.qcom,iommu-ctx: context mdp_1 using bank 18
  284. <6>[ 0.259286] msm_iommu_ctx 1e33000.qcom,iommu-ctx: context venus_sec_pixel using bank 19
  285. <6>[ 0.259404] msm_iommu_ctx 1e34000.qcom,iommu-ctx: context venus_sec_bitstream using bank 20
  286. <6>[ 0.259521] msm_iommu_ctx 1e35000.qcom,iommu-ctx: context venus_sec_non_pixel using bank 21
  287. <6>[ 0.259636] msm_iommu_ctx 1e36000.qcom,iommu-ctx: context venus_fw using bank 22
  288. <6>[ 0.259753] msm_iommu_ctx 1e37000.qcom,iommu-ctx: context periph_rpm using bank 23
  289. <6>[ 0.259873] msm_iommu_ctx 1e38000.qcom,iommu-ctx: context periph_CE using bank 24
  290. <6>[ 0.259990] msm_iommu_ctx 1e39000.qcom,iommu-ctx: context periph_BLSP using bank 25
  291. <6>[ 0.260106] msm_iommu_ctx 1e3a000.qcom,iommu-ctx: context periph_SDC1 using bank 26
  292. <6>[ 0.260228] msm_iommu_ctx 1e3b000.qcom,iommu-ctx: context periph_SDC2 using bank 27
  293. <6>[ 0.260349] msm_iommu_ctx 1e3c000.qcom,iommu-ctx: context periph_audio using bank 28
  294. <6>[ 0.260467] msm_iommu_ctx 1e3d000.qcom,iommu-ctx: context periph_USB_HS1 using bank 29
  295. <6>[ 0.260587] msm_iommu_ctx 1e2a000.qcom,iommu-ctx: context qpic using bank 10
  296. <6>[ 0.260710] msm_iommu_ctx 1e31000.qcom,iommu-ctx: context wlan using bank 17
  297. <6>[ 0.260826] msm_iommu_ctx 1e3f000.qcom,iommu-ctx: context periph_CE_secure using bank 31
  298. <6>[ 0.261715] Advanced Linux Sound Architecture Driver Initialized.
  299. <6>[ 0.262252] Bluetooth: ee869f10
  300. <6>[ 0.262298] NET: Registered protocol family 31
  301. <6>[ 0.262305] Bluetooth: ee869f10
  302. <6>[ 0.262318] Bluetooth: ee869f08Bluetooth: ee869ef8
  303. <6>[ 0.262358] Bluetooth: ee869ef8<6>[ 0.262632] cfg80211: Calling CRDA to update world regulatory domain
  304. <6>[ 0.262660] cfg80211: World regulatory domain updated:
  305. <6>[ 0.262667] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
  306. <6>[ 0.262675] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
  307. <6>[ 0.262682] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
  308. <6>[ 0.262689] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
  309. <6>[ 0.262696] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz), (300 mBi, 2000 mBm)
  310. <6>[ 0.262703] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz), (300 mBi, 2000 mBm)
  311. <6>[ 0.262711] cfg80211: (5490000 KHz - 5710000 KHz @ 80000 KHz), (300 mBi, 2000 mBm)
  312. <6>[ 0.262718] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (300 mBi, 2000 mBm)
  313. <6>[ 0.262725] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm)
  314. <6>[ 0.263635] Switching to clocksource arch_sys_counter
  315. <6>[ 0.294616] NET: Registered protocol family 2
  316. <6>[ 0.295157] TCP established hash table entries: 8192 (order: 4, 65536 bytes)
  317. <6>[ 0.295255] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
  318. <6>[ 0.295347] TCP: Hash tables configured (established 8192 bind 8192)
  319. <6>[ 0.295400] TCP: reno registered
  320. <6>[ 0.295412] UDP hash table entries: 512 (order: 2, 16384 bytes)
  321. <6>[ 0.295450] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
  322. <6>[ 0.295689] NET: Registered protocol family 1
  323. <6>[ 0.296286] gcc-mdss-8909 qcom,gcc-mdss.31: Registered GCC MDSS clocks.
  324. <6>[ 0.296819] Trying to unpack rootfs image as initramfs...
  325. <6>[ 0.531936] Freeing initrd memory: 4420K (c2000000 - c2451000)
  326. <6>[ 0.534632] hw perfevents: enabled with ARMv7 Cortex-A7 PMU driver, 5 counters available
  327. <6>[ 0.537666] audit: initializing netlink socket (disabled)
  328. <5>[ 0.537709] type=2000 audit(0.499:1): initialized
  329. <4>[ 0.718669] bounce pool size: 64 pages
  330. <6>[ 0.725213] fuse init (API version 7.23)
  331. <7>[ 0.725500] SELinux: Registering netfilter hooks
  332. <6>[ 0.728658] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
  333. <6>[ 0.728670] io scheduler noop registered
  334. <6>[ 0.728676] io scheduler deadline registered
  335. <6>[ 0.728699] io scheduler row registered
  336. <6>[ 0.728801] io scheduler cfq registered (default)
  337. <7>[ 0.728905] gpiochip_find_base: found new base at 910
  338. <7>[ 0.728991] gpiochip_add: registered GPIOs 910 to 910 on device: pm8916-mpp
  339. <7>[ 0.729068] qcom,qpnp-pin qpnp-pin-ee336400: qpnp_pin_probe: gpio_chip registered between 910-910
  340. <7>[ 0.729116] gpiochip_find_base: found new base at 909
  341. <7>[ 0.729182] gpiochip_add: registered GPIOs 909 to 909 on device: pm8916-gpio
  342. <7>[ 0.729224] qcom,qpnp-pin qpnp-pin-ee336600: qpnp_pin_probe: gpio_chip registered between 909-909
  343. <7>[ 0.729329] gpiochip_find_base: found new base at 877
  344. <7>[ 0.729403] gpiochip_add: registered GPIOs 877 to 908 on device: smp2p
  345. <7>[ 0.729591] gpiochip_find_base: found new base at 845
  346. <7>[ 0.729660] gpiochip_add: registered GPIOs 845 to 876 on device: smp2p
  347. <7>[ 0.729692] gpiochip_find_base: found new base at 813
  348. <7>[ 0.729765] gpiochip_add: registered GPIOs 813 to 844 on device: smp2p
  349. <7>[ 0.729972] gpiochip_find_base: found new base at 781
  350. <7>[ 0.730042] gpiochip_add: registered GPIOs 781 to 812 on device: smp2p
  351. <7>[ 0.730077] gpiochip_find_base: found new base at 749
  352. <7>[ 0.730144] gpiochip_add: registered GPIOs 749 to 780 on device: smp2p
  353. <7>[ 0.730347] gpiochip_find_base: found new base at 717
  354. <7>[ 0.730420] gpiochip_add: registered GPIOs 717 to 748 on device: smp2p
  355. <7>[ 0.730452] gpiochip_find_base: found new base at 685
  356. <7>[ 0.730521] gpiochip_add: registered GPIOs 685 to 716 on device: slave-kernel
  357. <6>[ 0.730605] platform qcom,smp2pgpio-ssr-smp2p-4-in.14: Driver smp2pgpio requests probe deferral
  358. <7>[ 0.730635] gpiochip_find_base: found new base at 685
  359. <7>[ 0.730702] gpiochip_add: registered GPIOs 685 to 716 on device: master-kernel
  360. <6>[ 0.730768] platform qcom,smp2pgpio-ssr-smp2p-4-out.15: Driver smp2pgpio requests probe deferral
  361. <7>[ 0.730796] gpiochip_find_base: found new base at 685
  362. <7>[ 0.730862] gpiochip_add: registered GPIOs 685 to 716 on device: slave-kernel
  363. <6>[ 0.730924] platform qcom,smp2pgpio-ssr-smp2p-1-in.16: Driver smp2pgpio requests probe deferral
  364. <7>[ 0.730953] gpiochip_find_base: found new base at 685
  365. <7>[ 0.731019] gpiochip_add: registered GPIOs 685 to 716 on device: master-kernel
  366. <6>[ 0.731081] platform qcom,smp2pgpio-ssr-smp2p-1-out.17: Driver smp2pgpio requests probe deferral
  367. <6>[ 0.733588] mdss_dsi_ctrl_probe: DSI Ctrl name = MDSS DSI CTRL->0
  368. <6>[ 0.733979] mdss_dsi_panel_init: Panel Name = mdss_dsi_nt35521s_xingyuan_wxga_video
  369. <6>[ 0.733989] mdss_dsi_panel_init: Panel code version = @20160808
  370. <4>[ 0.733998] register_hardware_info:hardware id=0, name=mdss_dsi_nt35521s_xingyuan_wxga_video@20160808
  371. <3>[ 0.734375] mdss_dsi_parse_dcs_cmds: failed, key=qcom,mdss-dsi-post-panel-on-command
  372. <3>[ 0.734396] mdss_dsi_parse_dcs_cmds: failed, key=qcom,mdss-dsi-panel-status-command
  373. <6>[ 0.734434] mdss_dsi_parse_panel_features: ulps feature disabled
  374. <6>[ 0.734445] mdss_dsi_parse_panel_features: ulps during suspend feature disabled
  375. <6>[ 0.734455] mdss_dsi_parse_panel_features: dynamic switch feature enabled: 0
  376. <7>[ 0.734469] of_get_named_gpio_flags: can't parse gpios property
  377. <3>[ 0.734475] mdss_dsi_parse_panel_features:1234, Disp_en gpio not specified
  378. <6>[ 0.734493] mdss_dsi_panel_init: Continuous splash enabled
  379. <7>[ 0.734782] of_get_named_gpio_flags: can't parse gpios property
  380. <3>[ 0.734791] dsi_panel_device_register:1925, Disp_en gpio not specified
  381. <7>[ 0.734798] of_get_named_gpio_flags: can't parse gpios property
  382. <3>[ 0.734805] dsi_panel_device_register:1933, TE gpio not specified
  383. <7>[ 0.734812] of_get_named_gpio_flags: can't parse gpios property
  384. <6>[ 0.734818] dsi_panel_device_register: bklt_en gpio not specified
  385. <3>[ 0.734949] mdss_dsi_pll_1_clk_init: can't find vco_clk. rc=-517
  386. <3>[ 0.734955] PLL 1 Clock's did not register
  387. <6>[ 0.734977] mdss_dsi_retrieve_ctrl_resources: ctrl_base=f0182000 ctrl_size=25c phy_base=f0184500 phy_size=2b0
  388. <3>[ 0.734986] dsi_panel_device_register: Using default BTA for ESD check
  389. <3>[ 0.754201] [zwt]+++ delay 120 then enable bias
  390. <3>[ 0.759223] [zwt]mdss_tps62561_enable: reuqest successfully lcm_bias_enable is set to 1
  391. <6>[ 0.764525] mdss_register_panel: adding framebuffer device 1ac8000.qcom,mdss_dsi
  392. <6>[ 0.766076] mdss_dsi_status_init: DSI status check interval:5000
  393. <6>[ 0.767090] mdp3_alloc: allocating 12582912 bytes at c3000000 (83000000 phys) for fb 0
  394. <6>[ 0.767308] mdss_fb_register: FrameBuffer[0] 800x1280 registered successfully!
  395. <6>[ 0.767315] mdp3_ctrl_init: mdp3_ctrl_init
  396. <4>[ 0.767407] mdp3 1a00000.qcom,mdss_mdp: Unbalanced pm_runtime_enable!
  397. <3>[ 0.769435] IPC_RTR: msm_ipc_router_smd_driver_register Already driver registered IPCRTR
  398. <5>[ 0.771121] msm_rpm_log_probe: OK
  399. <6>[ 0.772859] NET: Registered protocol family 27
  400. <6>[ 0.774905] In memshare_probe, Memshare probe success
  401. <7>[ 0.776633] of_get_named_gpio_flags exited with status -517
  402. <3>[ 0.776649] subsys-pil-tz a21b000.qcom,pronto: [wcnss]: Error getting proxy unvoting gpio
  403. <6>[ 0.776669] platform a21b000.qcom,pronto: Driver subsys-pil-tz requests probe deferral
  404. <7>[ 0.778182] of_get_named_gpio_flags exited with status -517
  405. <3>[ 0.778194] pil-q6v5-mss 4080000.qcom,mss: [modem]: Error getting proxy unvoting gpio
  406. <6>[ 0.778337] platform 4080000.qcom,mss: Driver pil-q6v5-mss requests probe deferral
  407. <6>[ 0.788162] kgsl kgsl-3d0: Initialized kgsl-3d0: mmu=on
  408. <6>[ 0.794174] brd: module loaded
  409. <6>[ 0.796328] loop: module loaded
  410. <3>[ 0.796781] QSEECOM: qseecom_probe: qseecom.qsee_version = 0x405000
  411. <4>[ 0.796814] QSEECOM: qseecom_probe: disk-encrypt-pipe-pair=0x2
  412. <4>[ 0.796822] QSEECOM: qseecom_probe: Device does not support PFEQSEECOM: qseecom_probe: qsee-ce-hw-instance=0x0
  413. <6>[ 0.796837] QSEECOM: qseecom_probe: qseecom.appsbl_qseecom_support = 0x0<6>[ 0.796844] QSEECOM: qseecom_probe: qseecom clocks handled by other subsystem
  414. <4>[ 0.796965] QSEECOM: qseecom_probe: secure app region addr=0x87a00000 size=0x200000
  415. <4>[ 0.798644] i2c-core: driver [tabla-i2c-core] using legacy suspend method
  416. <4>[ 0.798653] i2c-core: driver [tabla-i2c-core] using legacy resume method
  417. <4>[ 0.798766] i2c-core: driver [wcd9xxx-i2c-core] using legacy suspend method
  418. <4>[ 0.798772] i2c-core: driver [wcd9xxx-i2c-core] using legacy resume method
  419. <4>[ 0.798876] i2c-core: driver [tasha-i2c-core] using legacy suspend method
  420. <4>[ 0.798882] i2c-core: driver [tasha-i2c-core] using legacy resume method
  421. <7>[ 0.799386] of_get_named_gpio_flags: can't parse gpios property
  422. <3>[ 0.800466] i2c-msm-v2 78b6000.i2c: msm_bus_scale_register_client(mstr-id:86):0x6 (ok)
  423. <3>[ 0.801046] i2c-msm-v2 78b6000.i2c: NACK: slave not responding, ensure its powered: msgs(n:1 cur:0 tx) bc(rx:0 tx:1) mode:FIFO slv_addr:0xe MSTR_STS:0x0d1300c8 OPER:0x00000090
  424. <3>[ 0.801106] nfc-nci 2-000e: nfcc_hw_check: - no NFCC available
  425. <6>[ 0.801697] SCSI Media Changer driver v0.25
  426. <7>[ 0.802818] of_get_named_gpio_flags: can't parse gpios property
  427. <7>[ 0.802829] of_get_named_gpio_flags: can't parse gpios property
  428. <7>[ 0.802837] of_get_named_gpio_flags: can't parse gpios property
  429. <7>[ 0.802844] of_get_named_gpio_flags: can't parse gpios property
  430. <7>[ 0.802850] of_get_named_gpio_flags: can't parse gpios property
  431. <7>[ 0.802857] of_get_named_gpio_flags: can't parse gpios property
  432. <7>[ 0.802864] of_get_named_gpio_flags: can't parse gpios property
  433. <6>[ 0.804174] tun: Universal TUN/TAP device driver, 1.6
  434. <6>[ 0.804183] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
  435. <6>[ 0.806407] PPP generic driver version 2.4.2
  436. <6>[ 0.806507] PPP BSD Compression module registered
  437. <6>[ 0.806514] PPP Deflate Compression module registered
  438. <6>[ 0.806535] PPP MPPE Compression module registered
  439. <6>[ 0.806541] NET: Registered protocol family 24
  440. <6>[ 0.807118] wcnss_wlan probed in built-in mode
  441. <6>[ 0.807890] usbcore: registered new interface driver asix
  442. <6>[ 0.807964] usbcore: registered new interface driver ax88179_178a
  443. <6>[ 0.808003] usbcore: registered new interface driver cdc_ether
  444. <6>[ 0.808040] usbcore: registered new interface driver net1080
  445. <6>[ 0.808076] usbcore: registered new interface driver cdc_subset
  446. <6>[ 0.808110] usbcore: registered new interface driver zaurus
  447. <6>[ 0.808378] usbcore: registered new interface driver cdc_ncm
  448. <6>[ 0.808816] msm_sharedmem: sharedmem_register_qmi: qmi init successful
  449. <6>[ 0.809217] msm_sharedmem: msm_sharedmem_probe: Device created for client 'rmtfs'
  450. <6>[ 0.809334] msm_sharedmem: msm_sharedmem_probe: Device created for client 'rfsa_dsp'
  451. <6>[ 0.809454] msm_sharedmem: msm_sharedmem_probe: Device created for client 'rfsa_mdm'
  452. <6>[ 0.809881] msm_otg 78d9000.usb: msm_otg probe
  453. <7>[ 0.810204] of_get_named_gpio_flags: can't parse gpios property
  454. <7>[ 0.810214] of_get_named_gpio_flags: can't parse gpios property
  455. <7>[ 0.810222] of_get_named_gpio_flags: can't parse gpios property
  456. <7>[ 0.810235] of_get_named_gpio_flags: can't parse gpios property
  457. <6>[ 0.813181] msm_otg 78d9000.usb: OTG regs = f01bc000
  458. <6>[ 0.815271] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  459. <6>[ 0.815281] ehci-msm: Qualcomm On-Chip EHCI Host Controller
  460. <3>[ 0.815609] Unable to get vbus_otg
  461. <3>[ 0.815621] msm_hsusb_host msm_hsusb_host: unable to register with transceiver
  462. <6>[ 0.815651] platform msm_hsusb_host: Driver msm_hsusb_host requests probe deferral
  463. <6>[ 0.815679] ehci-msm2: Qualcomm EHCI Host Controller
  464. <6>[ 0.816145] usbcore: registered new interface driver cdc_acm
  465. <6>[ 0.816152] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
  466. <6>[ 0.816205] usbcore: registered new interface driver ccid_bridge
  467. <6>[ 0.816324] ccid_bridge_init: success
  468. <6>[ 0.816386] usbcore: registered new interface driver usb-storage
  469. <6>[ 0.816422] usbcore: registered new interface driver ums-alauda
  470. <6>[ 0.816456] usbcore: registered new interface driver ums-cypress
  471. <6>[ 0.816489] usbcore: registered new interface driver ums-datafab
  472. <6>[ 0.816521] usbcore: registered new interface driver ums-freecom
  473. <6>[ 0.816553] usbcore: registered new interface driver ums-isd200
  474. <6>[ 0.816586] usbcore: registered new interface driver ums-jumpshot
  475. <6>[ 0.816619] usbcore: registered new interface driver ums-karma
  476. <6>[ 0.816651] usbcore: registered new interface driver ums-onetouch
  477. <6>[ 0.816685] usbcore: registered new interface driver ums-sddr09
  478. <6>[ 0.816724] usbcore: registered new interface driver ums-sddr55
  479. <6>[ 0.816758] usbcore: registered new interface driver ums-usbat
  480. <6>[ 0.816857] usbcore: registered new interface driver usbserial
  481. <6>[ 0.816892] usbcore: registered new interface driver qc_csvt
  482. <6>[ 0.816923] usbserial: USB Serial support registered for qc_csvt
  483. <6>[ 0.816964] usbcore: registered new interface driver usb_ehset_test
  484. <6>[ 0.818975] mousedev: PS/2 mouse device common for all mice
  485. <6>[ 0.819147] usbcore: registered new interface driver xpad
  486. <3>[ 0.934012] i2c-msm-v2 78b9000.i2c: msm_bus_scale_register_client(mstr-id:86):0x8 (ok)
  487. <3>[ 0.934303] i2c-msm-v2 78b9000.i2c: NACK: slave not responding, ensure its powered: msgs(n:1 cur:0 tx) bc(rx:0 tx:2) mode:FIFO slv_addr:0x20 MSTR_STS:0x0d1300c8 OPER:0x00000090
  488. <3>[ 0.934347] synaptics_dsx_i2c 5-0020: synaptics_rmi4_i2c_set_page: I2C retry 1
  489. <3>[ 0.963803] i2c-msm-v2 78b9000.i2c: NACK: slave not responding, ensure its powered: msgs(n:1 cur:0 tx) bc(rx:0 tx:2) mode:FIFO slv_addr:0x20 MSTR_STS:0x0d1300c8 OPER:0x00000090
  490. <3>[ 0.963838] synaptics_dsx_i2c 5-0020: synaptics_rmi4_i2c_set_page: I2C retry 2
  491. <3>[ 0.993788] i2c-msm-v2 78b9000.i2c: NACK: slave not responding, ensure its powered: msgs(n:1 cur:0 tx) bc(rx:0 tx:2) mode:FIFO slv_addr:0x20 MSTR_STS:0x091343c8 OPER:0x00000090
  492. <3>[ 0.993821] synaptics_dsx_i2c 5-0020: synaptics_rmi4_i2c_set_page: I2C retry 3
  493. <3>[ 1.023773] i2c-msm-v2 78b9000.i2c: NACK: slave not responding, ensure its powered: msgs(n:1 cur:0 tx) bc(rx:0 tx:2) mode:FIFO slv_addr:0x20 MSTR_STS:0x091343c8 OPER:0x00000090
  494. <3>[ 1.023806] synaptics_dsx_i2c 5-0020: synaptics_rmi4_i2c_set_page: I2C retry 4
  495. <3>[ 1.053774] i2c-msm-v2 78b9000.i2c: NACK: slave not responding, ensure its powered: msgs(n:1 cur:0 tx) bc(rx:0 tx:2) mode:FIFO slv_addr:0x20 MSTR_STS:0x091343c8 OPER:0x00000090
  496. <3>[ 1.053805] synaptics_dsx_i2c 5-0020: synaptics_rmi4_i2c_set_page: I2C retry 5
  497. <3>[ 1.083769] i2c-msm-v2 78b9000.i2c: NACK: slave not responding, ensure its powered: msgs(n:1 cur:0 tx) bc(rx:0 tx:2) mode:FIFO slv_addr:0x20 MSTR_STS:0x091343c8 OPER:0x00000090
  498. <3>[ 1.083799] synaptics_dsx_i2c 5-0020: synaptics_rmi4_i2c_set_page: I2C retry 6
  499. <3>[ 1.113767] i2c-msm-v2 78b9000.i2c: NACK: slave not responding, ensure its powered: msgs(n:1 cur:0 tx) bc(rx:0 tx:2) mode:FIFO slv_addr:0x20 MSTR_STS:0x091343c8 OPER:0x00000090
  500. <3>[ 1.113798] synaptics_dsx_i2c 5-0020: synaptics_rmi4_i2c_set_page: I2C retry 7
  501. <3>[ 1.143769] i2c-msm-v2 78b9000.i2c: NACK: slave not responding, ensure its powered: msgs(n:1 cur:0 tx) bc(rx:0 tx:2) mode:FIFO slv_addr:0x20 MSTR_STS:0x091343c8 OPER:0x00000090
  502. <3>[ 1.143797] synaptics_dsx_i2c 5-0020: synaptics_rmi4_i2c_set_page: I2C retry 8
  503. <3>[ 1.173770] i2c-msm-v2 78b9000.i2c: NACK: slave not responding, ensure its powered: msgs(n:1 cur:0 tx) bc(rx:0 tx:2) mode:FIFO slv_addr:0x20 MSTR_STS:0x091343c8 OPER:0x00000090
  504. <3>[ 1.173801] synaptics_dsx_i2c 5-0020: synaptics_rmi4_i2c_set_page: I2C retry 9
  505. <3>[ 1.203766] i2c-msm-v2 78b9000.i2c: NACK: slave not responding, ensure its powered: msgs(n:1 cur:0 tx) bc(rx:0 tx:2) mode:FIFO slv_addr:0x20 MSTR_STS:0x091343c8 OPER:0x00000090
  506. <3>[ 1.203797] synaptics_dsx_i2c 5-0020: synaptics_rmi4_i2c_set_page: I2C retry 10
  507. <3>[ 1.233720] synaptics_dsx_i2c 5-0020: synaptics_rmi4_set_input_dev: Failed to query device
  508. <3>[ 1.233737] synaptics_dsx synaptics_dsx.0: synaptics_rmi4_probe: Failed to set up input device
  509. <6>[ 1.234557] input: FT5x36 as /devices/virtual/input/input0
  510. <3>[ 1.473783] i2c-msm-v2 78b9000.i2c: NACK: slave not responding, ensure its powered: msgs(n:2 cur:0 tx) bc(rx:1 tx:1) mode:FIFO slv_addr:0x38 MSTR_STS:0x091343c8 OPER:0x00000010
  511. <3>[ 1.473819] FT5x36 5-0038: ffts_i2c_Read: i2c read error.
  512. <6>[ 1.473828] [FTS]FTS_REG_VENDOR_ID =0xFD
  513. <6>[ 1.473828]
  514. <3>[ 1.473835] FT5x36 5-0038: vendor id read failed
  515. <6>[ 1.653742] msm_thermal:do_freq_control Limiting CPU0 max frequency to 1190400. Temp:60
  516. <6>[ 1.653866] msm_thermal:do_freq_control Limiting CPU1 max frequency to 1190400. Temp:60
  517. <6>[ 1.653881] msm_thermal:do_freq_control Limiting CPU2 max frequency to 1190400. Temp:60
  518. <6>[ 1.653895] msm_thermal:do_freq_control Limiting CPU3 max frequency to 1190400. Temp:60
  519. <6>[ 1.903746] msm_thermal:do_freq_control Limiting CPU0 max frequency to 998400. Temp:60
  520. <6>[ 1.903849] msm_thermal:do_freq_control Limiting CPU1 max frequency to 998400. Temp:60
  521. <6>[ 1.903866] msm_thermal:do_freq_control Limiting CPU2 max frequency to 998400. Temp:60
  522. <6>[ 1.903881] msm_thermal:do_freq_control Limiting CPU3 max frequency to 998400. Temp:60
  523. <6>[ 1.963999] Successfully added driver FT5x36
  524. <4>[ 1.964007] <<-GTP-INFO->> GTP driver installing...
  525. <4>[ 1.964387] <<-GTP-INFO->> GTP Driver Version: V2.2<2014/01/14>
  526. <4>[ 1.964397] <<-GTP-INFO->> GTP Driver Built@23:45:09, Aug 24 2016
  527. <4>[ 1.964403] <<-GTP-INFO->> GTP I2C Address: 0x14
  528. <4>[ 2.084156] <<-GTP-INFO->> IC Version: 9110_2010
  529. <4>[ 2.084672] <<-GTP-INFO->> probe:Sensor_ID: 0
  530. <4>[ 2.085297] <<-GTP-INFO->> init_panel:Sensor_ID: 0
  531. <4>[ 2.085306] <<-GTP-INFO->> cfg-data0 used, config length: 186
  532. <4>[ 2.085647] <<-GTP-INFO->> Driver send config.
  533. <3>[ 2.086007] sps: BAM device 0x07884000 is not registered yet.
  534. <6>[ 2.086044] sps:BAM 0x07884000 is registered.
  535. <6>[ 2.086312] sps:BAM 0x07884000 (va:0xf0680000) enabled: ver:0x18, number of pipes:16
  536. <4>[ 2.092300] <<-GTP-INFO->> X_MAX: 1280, Y_MAX: 800, TRIGGER: 0x00
  537. <4>[ 2.144289] <<-GTP-INFO->> Esd started
  538. <6>[ 2.144518] input: Goodix-TS as /devices/virtual/input/input1
  539. <4>[ 2.145049] register_hardware_info:hardware id=1, name=IC-Goodix GT915L-firmware:2010-Moudle:DePuTe
  540. <4>[ 2.145208] <<-GTP-INFO->> Applied memory size:2562.
  541. <4>[ 2.145217] <<-GTP-INFO->> I2C function: without pre and end cmd!
  542. <4>[ 2.145239] <<-GTP-INFO->> Create proc entry success!
  543. <3>[ 2.284060] i2c-msm-v2 78b5000.i2c: msm_bus_scale_register_client(mstr-id:86):0x9 (ok)
  544. <6>[ 2.284796] kionix_verify: devices id is 9
  545. <6>[ 2.284809] accelerometer 1-000e: this accelerometer is a KXTJ2-1009.
  546. <6>[ 2.285011] input: accelerometer as /devices/virtual/input/input2
  547. <6>[ 2.285362] accelerometer 1-000e: running in software polling mode
  548. <4>[ 2.286584] register_hardware_info:hardware id=5, name=kionix,kxtj2-1009
  549. <4>[ 2.286638] i2c-core: driver [accelerometer] using legacy suspend method
  550. <4>[ 2.286646] i2c-core: driver [accelerometer] using legacy resume method
  551. <6>[ 2.287452] hall_sensor hall-sensor.69: Detected hall_sensor_parse_dt(),parse device tree
  552. <6>[ 2.287674] input: hall_sensors as /devices/virtual/input/input3
  553. <3>[ 2.303797] hall_sensor hall-sensor.69: hall sensor1 gpio932 input direction
  554. <6>[ 2.304466] qcom,qpnp-rtc qpnp-rtc-ee336800: rtc core: registered qpnp_rtc as rtc0
  555. <6>[ 2.304692] i2c /dev entries driver
  556. <6>[ 2.308394] platform 1d00000.qcom,vidc: Driver msm_vidc_v4l2 requests probe deferral
  557. <6>[ 2.311458] msm_actuator_i2c_probe:1253 msm_actuator_i2c_probe: succeeded
  558. <3>[ 2.312358] adp1660 i2c_add_driver success
  559. <3>[ 2.312736] msm_flash_init_module:1043 Enter
  560. <3>[ 2.313113] msm_flash_lm3642_init entry
  561. <3>[ 2.314716] msm_camera_config_single_vreg : can't find sub reg name
  562. <3>[ 2.343815] i2c-msm-v2 78b7000.i2c: msm_bus_scale_register_client(mstr-id:86):0xa (ok)
  563. <4>[ 2.842116] get group index 0
  564. <4>[ 2.842128] Devine : otp_id = 0x7
  565. <3>[ 2.870821] msm_camera_config_single_vreg : can't find sub reg name
  566. <3>[ 2.872807] g_sctrl[0] edc94800g_sctrl[1] edc95000
  567. <3>[ 2.873456] gc0310_init_module:487
  568. <6>[ 2.876766] i2c 4-0057: Driver smb358-charger requests probe deferral
  569. <4>[ 2.877307] i2c-core: driver [couloMeter] using legacy suspend method
  570. <4>[ 2.877317] i2c-core: driver [couloMeter] using legacy resume method
  571. <3>[ 2.878346] unable to find DT imem DLOAD mode node
  572. <3>[ 2.878693] unable to find DT imem EDLOAD mode node
  573. <3>[ 2.879836] qpnp_vadc_get_temp: VADC read error with -517
  574. <4>[ 2.879851] thermal thermal_zone0: failed to read out thermal zone 0
  575. <3>[ 2.880006] qpnp_vadc_get_temp: VADC read error with -517
  576. <4>[ 2.880018] thermal thermal_zone1: failed to read out thermal zone 1
  577. <3>[ 2.880156] qpnp_vadc_get_temp: VADC read error with -517
  578. <4>[ 2.880167] thermal thermal_zone2: failed to read out thermal zone 2
  579. <6>[ 2.898104] device-mapper: ioctl: 4.24.0-ioctl (2013-01-15) initialised: dm-devel@redhat.com
  580. <6>[ 2.898307] device-mapper: req-crypt: dm-req-crypt successfully initalized.
  581. <6>[ 2.898307]
  582. <6>[ 2.898567] cpuidle: using governor ladder
  583. <6>[ 2.898577] cpuidle: using governor menu
  584. <6>[ 2.898620] sdhci: Secure Digital Host Controller Interface driver
  585. <6>[ 2.898627] sdhci: Copyright(c) Pierre Ossman
  586. <6>[ 2.898633] sdhci-pltfm: SDHCI platform and OF driver helper
  587. <7>[ 2.899447] of_get_named_gpio_flags: can't parse gpios property
  588. <7>[ 2.899459] of_get_named_gpio_flags: can't parse gpios property
  589. <6>[ 2.904290] sdhci_msm 7824900.sdhci: host_use_default_qos = 1
  590. <6>[ 2.904307] sdhci_msm 7824900.sdhci: For qos_policy(default qos) = 0, tbl_sz = 3, qos type = 2
  591. <6>[ 2.904317] sdhci_msm 7824900.sdhci: dma_latency = 2
  592. <6>[ 2.904327] sdhci_msm 7824900.sdhci: dma_latency = 241
  593. <6>[ 2.904337] sdhci_msm 7824900.sdhci: dma_latency = 501
  594. <6>[ 2.904349] sdhci_msm 7824900.sdhci: For qos_policy(modified dynamic qos) = 1, tbl_sz = 1, qos type = 2
  595. <6>[ 2.904359] sdhci_msm 7824900.sdhci: dma_latency = 200
  596. <6>[ 2.904371] sdhci_msm 7824900.sdhci: For qos_policy(modified dynamic qos) = 2, tbl_sz = 1, qos type = 2
  597. <6>[ 2.904380] sdhci_msm 7824900.sdhci: dma_latency = 200
  598. <6>[ 2.904391] sdhci_msm 7824900.sdhci: Host using default pm_qos
  599. <6>[ 2.905196] mmc0: no vqmmc regulator found
  600. <6>[ 2.905213] mmc0: no vmmc regulator found
  601. <6>[ 2.933734] mmc0: SDHCI controller on 7824900.sdhci [7824900.sdhci] using 32-bit ADMA
  602. <3>[ 2.934837] mmc1 vdd enable
  603. <6>[ 2.944456] sdhci_msm 7864900.sdhci: host_use_default_qos = 1
  604. <6>[ 2.944473] sdhci_msm 7864900.sdhci: For qos_policy(default qos) = 0, tbl_sz = 3, qos type = 2
  605. <6>[ 2.944483] sdhci_msm 7864900.sdhci: dma_latency = 2
  606. <6>[ 2.944493] sdhci_msm 7864900.sdhci: dma_latency = 241
  607. <6>[ 2.944503] sdhci_msm 7864900.sdhci: dma_latency = 501
  608. <6>[ 2.944514] sdhci_msm 7864900.sdhci: For qos_policy(modified dynamic qos) = 1, tbl_sz = 1, qos type = 2
  609. <6>[ 2.944524] sdhci_msm 7864900.sdhci: dma_latency = 200
  610. <6>[ 2.944536] sdhci_msm 7864900.sdhci: For qos_policy(modified dynamic qos) = 2, tbl_sz = 1, qos type = 2
  611. <6>[ 2.944546] sdhci_msm 7864900.sdhci: dma_latency = 200
  612. <6>[ 2.944556] sdhci_msm 7864900.sdhci: Host using default pm_qos
  613. <6>[ 2.945591] mmc1: no vqmmc regulator found
  614. <6>[ 2.945606] mmc1: no vmmc regulator found
  615. <6>[ 3.005224] mmc0: BKOPS_EN bit = 0
  616. <6>[ 3.005235] mmc0:manifacture id is 0x15
  617. <4>[ 3.005246] register_hardware_info:hardware id=9, name=SAMSUNG: 14910 MB(EMMC) 2GB(DDR)
  618. <6>[ 3.013181] mmc0: new HS200 MMC card at address 0001
  619. <6>[ 3.013779] mmcblk0: mmc0:0001 FE62MB 14.5 GiB
  620. <6>[ 3.013990] mmcblk0rpmb: mmc0:0001 FE62MB partition 3 4.00 MiB
  621. <6>[ 3.016320] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18 p19 p20 p21 p22 p23 p24 p25 p26 p27 p28 p29
  622. <3>[ 2.946049] mmc1, sdhci_set_power delay 100ms num= 1.
  623. <6>[ 3.074105] mmc1: SDHCI controller on 7864900.sdhci [7864900.sdhci] using 32-bit ADMA
  624. <4>[ 3.074820] qcom,leds-qpnp: probe of leds-qpnp-ee337400 failed with error -10
  625. <3>[ 3.075815] i2c-msm-v2 78b5000.i2c: NACK: slave not responding, ensure its powered: msgs(n:1 cur:0 tx) bc(rx:0 tx:2) mode:FIFO slv_addr:0x45 MSTR_STS:0x011363c8 OPER:0x00000090
  626. <3>[ 3.076064] i2c-msm-v2 78b5000.i2c: NACK: slave not responding, ensure its powered: msgs(n:2 cur:0 tx) bc(rx:1 tx:1) mode:FIFO slv_addr:0x45 MSTR_STS:0x0d1343c8 OPER:0x00000010
  627. <3>[ 3.076117] aw2013_led 1-0045: Check chip id error
  628. <4>[ 3.076138] aw2013_led: probe of 1-0045 failed with error -22
  629. <6>[ 3.079435] qce 720000.qcedev: Qualcomm Crypto 5.3.1 device found @0x720000
  630. <6>[ 3.079457] qce 720000.qcedev: CE device = 0x0
  631. <6>[ 3.079457] , IO base, CE = 0xf06c0000
  632. <6>[ 3.079457] , Consumer (IN) PIPE 2, Producer (OUT) PIPE 3
  633. <6>[ 3.079457] IO base BAM = 0x (null)
  634. <6>[ 3.079457] BAM IRQ 239
  635. <6>[ 3.079457] Engines Availability = 0x2010853
  636. <6>[ 3.079503] sps:BAM 0x00704000 is registered.
  637. <6>[ 3.080385] sps:BAM 0x00704000 (va:0xf07c0000) enabled: ver:0x25, number of pipes:8
  638. <6>[ 3.081284] QCE50: qce_sps_init: Qualcomm MSM CE-BAM at 0x0000000000704000 irq 239
  639. <6>[ 3.081922] qcedev: FIPS140-2 Known Answer Tests : Skipped
  640. <6>[ 3.083017] qcrypto 720000.qcrypto: Qualcomm Crypto 5.3.1 device found @0x720000
  641. <6>[ 3.083039] qcrypto 720000.qcrypto: CE device = 0x0
  642. <6>[ 3.083039] , IO base, CE = 0xf0c40000
  643. <6>[ 3.083039] , Consumer (IN) PIPE 4, Producer (OUT) PIPE 5
  644. <6>[ 3.083039] IO base BAM = 0x (null)
  645. <6>[ 3.083039] BAM IRQ 239
  646. <6>[ 3.083039] Engines Availability = 0x2010853
  647. <6>[ 3.084836] QCE50: qce_sps_init: Qualcomm MSM CE-BAM at 0x0000000000704000 irq 239
  648. <6>[ 3.085644] qcrypto 720000.qcrypto: qcrypto-ecb-aes
  649. <6>[ 3.085850] qcrypto 720000.qcrypto: qcrypto-cbc-aes
  650. <6>[ 3.086044] qcrypto 720000.qcrypto: qcrypto-ctr-aes
  651. <6>[ 3.086229] qcrypto 720000.qcrypto: qcrypto-ecb-des
  652. <6>[ 3.086418] qcrypto 720000.qcrypto: qcrypto-cbc-des
  653. <6>[ 3.086588] qcrypto 720000.qcrypto: qcrypto-ecb-3des
  654. <6>[ 3.086769] qcrypto 720000.qcrypto: qcrypto-cbc-3des
  655. <6>[ 3.086933] qcrypto 720000.qcrypto: qcrypto-xts-aes
  656. <6>[ 3.087116] qcrypto 720000.qcrypto: qcrypto-sha1
  657. <6>[ 3.087278] qcrypto 720000.qcrypto: qcrypto-sha256
  658. <6>[ 3.087456] qcrypto 720000.qcrypto: qcrypto-aead-hmac-sha1-cbc-aes
  659. <6>[ 3.087619] qcrypto 720000.qcrypto: qcrypto-aead-hmac-sha1-cbc-des
  660. <6>[ 3.087803] qcrypto 720000.qcrypto: qcrypto-aead-hmac-sha1-cbc-3des
  661. <6>[ 3.087988] qcrypto 720000.qcrypto: qcrypto-aead-hmac-sha256-cbc-aes
  662. <6>[ 3.088153] qcrypto 720000.qcrypto: qcrypto-aead-hmac-sha256-cbc-des
  663. <6>[ 3.088334] qcrypto 720000.qcrypto: qcrypto-aead-hmac-sha256-cbc-3des
  664. <6>[ 3.088499] qcrypto 720000.qcrypto: qcrypto-hmac-sha1
  665. <6>[ 3.088678] qcrypto 720000.qcrypto: qcrypto-hmac-sha256
  666. <6>[ 3.088840] qcrypto 720000.qcrypto: qcrypto-aes-ccm
  667. <6>[ 3.089021] qcrypto 720000.qcrypto: qcrypto-rfc4309-aes-ccm
  668. <6>[ 3.089030] qcrypto: FIPS140-2 Known Answer Tests: Skipped
  669. <6>[ 3.089832] usbcore: registered new interface driver usbhid
  670. <6>[ 3.089842] usbhid: USB HID core driver
  671. <6>[ 3.090302] zram: Created 1 device(s) ...
  672. <6>[ 3.090758] ashmem: initialized
  673. <6>[ 3.090908] logger: created 256K log 'log_main'
  674. <6>[ 3.091038] logger: created 256K log 'log_events'
  675. <6>[ 3.091176] logger: created 256K log 'log_radio'
  676. <6>[ 3.091312] logger: created 256K log 'log_system'
  677. <6>[ 3.092141] sps:BAM 0x078c4000 is registered.
  678. <6>[ 3.092567] qcom,qpnp-power-on qpnp-power-on-ee336200: PMIC@SID0 Power-on reason: Triggered from Hard Reset and 'warm' boot
  679. <6>[ 3.092593] qcom,qpnp-power-on qpnp-power-on-ee336200: PMIC@SID0: Power-off reason: Triggered from PS_HOLD (PS_HOLD/MSM controlled shutdown)
  680. <6>[ 3.092862] input: qpnp_pon as /devices/virtual/input/input4
  681. <6>[ 3.094746] PMIC@SID0: PM8916 v2.0.1 options: 0, 2, 0, 0
  682. <6>[ 3.112105] populate_opp_table: clock-a7: OPP tables populated (cpu 3)
  683. <6>[ 3.112124] print_opp_table: clock_cpu: a7: OPP voltage for 200000000: 1
  684. <6>[ 3.112132] print_opp_table: clock_cpu: a7: OPP voltage for 1267200000: 9
  685. <6>[ 3.113192] bimc-bwmon 410000.qcom,gpu-bwmon: BW HWmon governor registered.
  686. <6>[ 3.113376] bimc-bwmon 408000.qcom,cpu-bwmon: BW HWmon governor registered.
  687. <3>[ 3.116044] devfreq qcom,cpubw.32: Couldn't update frequency transition information.
  688. <6>[ 3.120785] coresight-fuse 5e01c.fuse: Fuse initialized
  689. <6>[ 3.121677] coresight-cti 810000.cti: CTI initialized
  690. <6>[ 3.121859] coresight-cti 811000.cti: CTI initialized
  691. <6>[ 3.122031] coresight-cti 812000.cti: CTI initialized
  692. <6>[ 3.122201] coresight-cti 813000.cti: CTI initialized
  693. <6>[ 3.122363] coresight-cti 814000.cti: CTI initialized
  694. <6>[ 3.122534] coresight-cti 815000.cti: CTI initialized
  695. <6>[ 3.122882] coresight-cti 816000.cti: CTI initialized
  696. <6>[ 3.123058] coresight-cti 817000.cti: CTI initialized
  697. <6>[ 3.123236] coresight-cti 818000.cti: CTI initialized
  698. <6>[ 3.123418] coresight-cti 851000.cti: CTI initialized
  699. <6>[ 3.123592] coresight-cti 852000.cti: CTI initialized
  700. <6>[ 3.123936] coresight-cti 853000.cti: CTI initialized
  701. <6>[ 3.124146] coresight-cti 854000.cti: CTI initialized
  702. <6>[ 3.124320] coresight-cti 83c000.cti: CTI initialized
  703. <6>[ 3.124500] coresight-cti 838000.cti: CTI initialized
  704. <6>[ 3.124677] coresight-cti 835000.cti: CTI initialized
  705. <6>[ 3.124859] coresight-cti 830000.cti: CTI initialized
  706. <6>[ 3.125469] coresight-csr 801000.csr: CSR initialized
  707. <6>[ 3.126071] coresight-tmc 826000.tmc: Byte Counter feature enabled
  708. <6>[ 3.126098] sps:BAM 0x00884000 is registered.
  709. <6>[ 3.126303] coresight-tmc 826000.tmc: TMC initialized
  710. <6>[ 3.126597] coresight-tmc 825000.tmc: TMC initialized
  711. <6>[ 3.128859] nidnt boot config: 0
  712. <6>[ 3.130301] coresight-tpiu 820000.tpiu: NIDnT on SDCARD only mode
  713. <6>[ 3.130429] coresight-tpiu 820000.tpiu: TPIU initialized
  714. <6>[ 3.131061] coresight-funnel 821000.funnel: FUNNEL initialized
  715. <6>[ 3.131215] coresight-funnel 869000.funnel: FUNNEL initialized
  716. <6>[ 3.131354] coresight-funnel 868000.funnel: FUNNEL initialized
  717. <6>[ 3.131532] coresight-funnel 855000.funnel: FUNNEL initialized
  718. <6>[ 3.132052] coresight-replicator 824000.replicator: REPLICATOR initialized
  719. <6>[ 3.132710] coresight-stm 802000.stm: STM initialized
  720. <6>[ 3.133232] coresight-hwevent 86c000.hwevent: Hardware Event driver initialized
  721. <6>[ 3.133843] usbcore: registered new interface driver snd-usb-audio
  722. <6>[ 3.135028] spmi msm8x16_wcd_codec-ee337a00: Driver wcd-spmi-core requests probe deferral
  723. <6>[ 3.135070] spmi msm8x16_wcd_codec-ee337c00: Driver wcd-spmi-core requests probe deferral
  724. <6>[ 3.148495] msm-pcm-lpa qcom,msm-pcm-lpa.46: msm_pcm_probe: dev name qcom,msm-pcm-lpa.46
  725. <6>[ 3.149411] platform qcom,msm-voip-dsp.48: Driver msm-voip-dsp requests probe deferral
  726. <6>[ 3.149873] platform qcom,msm-pcm-voice.49: Driver msm-pcm-voice requests probe deferral
  727. <6>[ 3.156390] msm8x16-asoc-wcd sound.68: default codec configured
  728. <3>[ 3.158317] msm8x16-asoc-wcd sound.68: ASoC: platform (null) not registered
  729. <3>[ 3.158369] msm8x16-asoc-wcd sound.68: snd_soc_register_card failed (-517)
  730. <6>[ 3.158424] platform sound.68: Driver msm8x16-asoc-wcd requests probe deferral
  731. <6>[ 3.158749] u32 classifier
  732. <6>[ 3.158757] Actions configured
  733. <6>[ 3.158769] Netfilter messages via NETLINK v0.30.
  734. <6>[ 3.158888] nf_conntrack version 0.5.0 (14276 buckets, 57104 max)
  735. <6>[ 3.159515] ctnetlink v0.93: registering with nfnetlink.
  736. <6>[ 3.159633] NF_TPROXY: Transparent proxy support initialized, version 4.1.0
  737. <6>[ 3.159641] NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd.
  738. <6>[ 3.160148] xt_time: kernel timezone is -0000
  739. <6>[ 3.160488] ip_tables: (C) 2000-2006 Netfilter Core Team
  740. <6>[ 3.160697] arp_tables: (C) 2002 David S. Miller
  741. <6>[ 3.160751] TCP: cubic registered
  742. <6>[ 3.160758] Initializing XFRM netlink socket
  743. <6>[ 3.161326] NET: Registered protocol family 10
  744. <6>[ 3.162315] mip6: Mobile IPv6
  745. <6>[ 3.162357] ip6_tables: (C) 2000-2006 Netfilter Core Team
  746. <6>[ 3.162530] sit: IPv6 over IPv4 tunneling driver
  747. <6>[ 3.163141] NET: Registered protocol family 17
  748. <6>[ 3.163190] NET: Registered protocol family 15
  749. <5>[ 3.163314] Bridge firewalling registered
  750. <6>[ 3.163329] Ebtables v2.0 registered
  751. <6>[ 3.163591] Bluetooth: ee869ef0
  752. <6>[ 3.163625] Bluetooth: ee869ee8Bluetooth: ee869f00
  753. <6>[ 3.163639] Bluetooth: ee869ed8Bluetooth: ee869ed8
  754. <6>[ 3.163658] Bluetooth: ee869ed0Bluetooth: ee869f10
  755. <6>[ 3.163676] Bluetooth: ee869f10<6>[ 3.163814] l2tp_core: L2TP core driver, V2.0
  756. <6>[ 3.163839] l2tp_ppp: PPPoL2TP kernel driver, V2.0
  757. <6>[ 3.163847] l2tp_ip: L2TP IP encapsulation support (L2TPv3)
  758. <6>[ 3.163872] l2tp_netlink: L2TP netlink interface
  759. <6>[ 3.163915] l2tp_eth: L2TP ethernet pseudowire support (L2TPv3)
  760. <6>[ 3.163946] l2tp_debugfs: L2TP debugfs support
  761. <6>[ 3.163954] l2tp_ip6: L2TP IP encapsulation support for IPv6 (L2TPv3)
  762. <7>[ 3.164178] gpiochip_find_base: found new base at 685
  763. <7>[ 3.164306] gpiochip_add: registered GPIOs 685 to 716 on device: slave-kernel
  764. <7>[ 3.164899] gpiochip_find_base: found new base at 653
  765. <7>[ 3.165005] gpiochip_add: registered GPIOs 653 to 684 on device: master-kernel
  766. <7>[ 3.165117] gpiochip_find_base: found new base at 621
  767. <7>[ 3.165218] gpiochip_add: registered GPIOs 621 to 652 on device: slave-kernel
  768. <7>[ 3.165773] gpiochip_find_base: found new base at 589
  769. <7>[ 3.165870] gpiochip_add: registered GPIOs 589 to 620 on device: master-kernel
  770. <3>[ 3.169609] Unable to get vbus_otg
  771. <3>[ 3.169628] msm_hsusb_host msm_hsusb_host: unable to register with transceiver
  772. <6>[ 3.169658] platform msm_hsusb_host: Driver msm_hsusb_host requests probe deferral
  773. <7>[ 3.172500] of_get_named_gpio_flags: can't parse gpios property
  774. <3>[ 3.172817] i2c-msm-v2 78b8000.i2c: msm_bus_scale_register_client(mstr-id:86):0x15 (ok)
  775. <6>[ 3.174484] smb358_otg_vreg: no parameters
  776. <3>[ 3.180672] SMB358 qpnp_charge_wake_lock_work: qpnp_charge_wake_lock_work: 1
  777. <4>[ 3.180708] <<-GTP-INFO->> charger_report_work_func:charger status:charger plug in
  778. <4>[ 3.180733] <<-GTP-INFO->> fb unblank,tp resume
  779. <4>[ 3.180741] <<-GTP-INFO->> far away,awake status,switch to normal window
  780. <4>[ 3.181399] <<-GTP-INFO->> init_panel:Sensor_ID: 0
  781. <4>[ 3.181408] <<-GTP-INFO->> chg_insert_for_tp: 1
  782. <6>[ 3.181415] shj chg_insert_for_tp sensor_id :1
  783. <4>[ 3.181422] <<-GTP-INFO->> cfg-data1 used, config length: 186
  784. <4>[ 3.181778] <<-GTP-INFO->> Driver send config.
  785. <3>[ 3.185770] SMB358 smb358_charger_probe: read_battery_id=162000.
  786. <4>[ 3.187691] <<-GTP-INFO->> X_MAX: 800, Y_MAX: 1280, TRIGGER: 0x00
  787. <6>[ 3.195279] smb358-charger 4-0057: SMB358 successfully probed. charger=1, batt=1
  788. <6>[ 3.195479] spmi msm8x16_wcd_codec-ee337a00: Driver wcd-spmi-core requests probe deferral
  789. <6>[ 3.195537] spmi msm8x16_wcd_codec-ee337c00: Driver wcd-spmi-core requests probe deferral
  790. <6>[ 3.199027] msm8x16-asoc-wcd sound.68: default codec configured
  791. <7>[ 3.199397] _gpio_request: gpio-1008 (ext_spk_pa_left_amp_gpio) status -16
  792. <3>[ 3.199406] msm8x16_ext_spk_pa_init: gpio_request failed for ext_spk_pa_left_amp_gpio.
  793. <3>[ 3.201152] msm8x16-asoc-wcd sound.68: ASoC: CODEC (null) not registered
  794. <3>[ 3.201204] msm8x16-asoc-wcd sound.68: snd_soc_register_card failed (-517)
  795. <6>[ 3.201270] platform sound.68: Driver msm8x16-asoc-wcd requests probe deferral
  796. <6>[ 3.201740] spmi msm8x16_wcd_codec-ee337a00: Driver wcd-spmi-core requests probe deferral
  797. <6>[ 3.201799] spmi msm8x16_wcd_codec-ee337c00: Driver wcd-spmi-core requests probe deferral
  798. <6>[ 3.202545] msm8x16-asoc-wcd sound.68: default codec configured
  799. <7>[ 3.202885] _gpio_request: gpio-1008 (ext_spk_pa_left_amp_gpio) status -16
  800. <3>[ 3.202894] msm8x16_ext_spk_pa_init: gpio_request failed for ext_spk_pa_left_amp_gpio.
  801. <6>[ 3.203115] msm_otg 78d9000.usb: phy_reset: success
  802. <3>[ 3.204684] msm8x16-asoc-wcd sound.68: ASoC: CODEC (null) not registered
  803. <3>[ 3.204726] msm8x16-asoc-wcd sound.68: snd_soc_register_card failed (-517)
  804. <6>[ 3.204791] platform sound.68: Driver msm8x16-asoc-wcd requests probe deferral
  805. <5>[ 3.205700] Registering SWP/SWPB emulation handler
  806. <4>[ 3.304126] [oem][usb]: (msm_otg_read_phy_id_state) prepare_count=2, count=2
  807. <4>[ 3.304344] [oem][usb]: (msm_otg_read_phy_id_state) prepare_count=2, count=2
  808. <6>[ 3.347663] mem_acc_corner: disabling
  809. <6>[ 3.347678] regulator-dummy: disabling
  810. <6>[ 3.347804] spmi msm8x16_wcd_codec-ee337a00: Driver wcd-spmi-core requests probe deferral
  811. <6>[ 3.347865] spmi msm8x16_wcd_codec-ee337c00: Driver wcd-spmi-core requests probe deferral
  812. <6>[ 3.348749] msm8x16-asoc-wcd sound.68: default codec configured
  813. <7>[ 3.349103] _gpio_request: gpio-1008 (ext_spk_pa_left_amp_gpio) status -16
  814. <3>[ 3.349112] msm8x16_ext_spk_pa_init: gpio_request failed for ext_spk_pa_left_amp_gpio.
  815. <3>[ 3.350849] msm8x16-asoc-wcd sound.68: ASoC: CODEC (null) not registered
  816. <3>[ 3.350899] msm8x16-asoc-wcd sound.68: snd_soc_register_card failed (-517)
  817. <6>[ 3.350954] platform sound.68: Driver msm8x16-asoc-wcd requests probe deferral
  818. <6>[ 3.352670] file system registered
  819. <6>[ 3.352745] mbim_init: initialize 1 instances
  820. <6>[ 3.352832] mbim_init: Initialized 1 ports
  821. <6>[ 3.352840] mbim_bam_setup: no_ports:1
  822. <6>[ 3.353038] mbim_bam_setup: Initialized 1 ports
  823. <6>[ 3.354420] rndis_qc_init: initialize rndis QC instance
  824. <6>[ 3.354895] android_usb gadget: Mass Storage Function, version: 2009/09/11
  825. <6>[ 3.354906] android_usb gadget: Number of LUNs=2
  826. <6>[ 3.354916] lun0: LUN: removable file: (no medium)
  827. <6>[ 3.354924] lun1: LUN: read only CD-ROM file: (no medium)
  828. <6>[ 3.355352] android_usb gadget: android_usb ready
  829. <6>[ 3.355367] msm_hsusb msm_hsusb: [ci13xxx_start] hw_ep_max = 16
  830. <6>[ 3.355525] spmi msm8x16_wcd_codec-ee337a00: Driver wcd-spmi-core requests probe deferral
  831. <6>[ 3.355588] spmi msm8x16_wcd_codec-ee337c00: Driver wcd-spmi-core requests probe deferral
  832. <6>[ 3.356589] msm8x16-asoc-wcd sound.68: default codec configured
  833. <7>[ 3.357113] _gpio_request: gpio-1008 (ext_spk_pa_left_amp_gpio) status -16
  834. <3>[ 3.357123] msm8x16_ext_spk_pa_init: gpio_request failed for ext_spk_pa_left_amp_gpio.
  835. <7>[ 3.357144] gpiod_set_debounce: gpio-1001 status -22
  836. <6>[ 3.357554] input: gpio-keys as /devices/soc.0/gpio_keys.67/input/input5
  837. <6>[ 3.358387] qcom,qpnp-rtc qpnp-rtc-ee336800: setting system clock to 1970-03-19 18:16:15 UTC (6718575)
  838. <3>[ 3.358950] msm8x16-asoc-wcd sound.68: ASoC: CODEC (null) not registered
  839. <3>[ 3.359001] msm8x16-asoc-wcd sound.68: snd_soc_register_card failed (-517)
  840. <6>[ 3.359065] platform sound.68: Driver msm8x16-asoc-wcd requests probe deferral
  841. <6>[ 3.359179] spmi msm8x16_wcd_codec-ee337a00: Driver wcd-spmi-core requests probe deferral
  842. <6>[ 3.359244] spmi msm8x16_wcd_codec-ee337c00: Driver wcd-spmi-core requests probe deferral
  843. <6>[ 3.360030] msm_thermal:interrupt_mode_init Interrupt mode init
  844. <6>[ 3.360047] msm_thermal:disable_msm_thermal Max frequency reset for CPU0
  845. <6>[ 3.360109] msm8x16-asoc-wcd sound.68: default codec configured
  846. <7>[ 3.360454] _gpio_request: gpio-1008 (ext_spk_pa_left_amp_gpio) status -16
  847. <3>[ 3.360462] msm8x16_ext_spk_pa_init: gpio_request failed for ext_spk_pa_left_amp_gpio.
  848. <4>[ 3.360631] <<-GTP-INFO->> Update status for Charger Plugin
  849. <4>[ 3.360631]
  850. <6>[ 3.360755] msm_thermal:disable_msm_thermal Max frequency reset for CPU1
  851. <6>[ 3.360803] msm_thermal:disable_msm_thermal Max frequency reset for CPU2
  852. <6>[ 3.360832] msm_thermal:disable_msm_thermal Max frequency reset for CPU3
  853. <6>[ 3.362009] /soc/qcom,lpm-levels/qcom,pm-cluster@0: No CPU phandle, assuming single cluster
  854. <3>[ 3.362053] msm8x16-asoc-wcd sound.68: ASoC: CODEC (null) not registered
  855. <3>[ 3.362115] msm8x16-asoc-wcd sound.68: snd_soc_register_card failed (-517)
  856. <6>[ 3.362207] platform sound.68: Driver msm8x16-asoc-wcd requests probe deferral
  857. <6>[ 3.363187] spmi msm8x16_wcd_codec-ee337a00: Driver wcd-spmi-core requests probe deferral
  858. <6>[ 3.363244] spmi msm8x16_wcd_codec-ee337c00: Driver wcd-spmi-core requests probe deferral
  859. <6>[ 3.364084] msm8x16-asoc-wcd sound.68: default codec configured
  860. <7>[ 3.364409] _gpio_request: gpio-1008 (ext_spk_pa_left_amp_gpio) status -16
  861. <3>[ 3.364417] msm8x16_ext_spk_pa_init: gpio_request failed for ext_spk_pa_left_amp_gpio.
  862. <3>[ 3.365837] msm8x16-asoc-wcd sound.68: ASoC: CODEC (null) not registered
  863. <3>[ 3.365878] msm8x16-asoc-wcd sound.68: snd_soc_register_card failed (-517)
  864. <6>[ 3.365930] platform sound.68: Driver msm8x16-asoc-wcd requests probe deferral
  865. <6>[ 3.366027] spmi msm8x16_wcd_codec-ee337a00: Driver wcd-spmi-core requests probe deferral
  866. <6>[ 3.366073] spmi msm8x16_wcd_codec-ee337c00: Driver wcd-spmi-core requests probe deferral
  867. <6>[ 3.366748] msm8x16-asoc-wcd sound.68: default codec configured
  868. <7>[ 3.367032] _gpio_request: gpio-1008 (ext_spk_pa_left_amp_gpio) status -16
  869. <3>[ 3.367040] msm8x16_ext_spk_pa_init: gpio_request failed for ext_spk_pa_left_amp_gpio.
  870. <6>[ 3.367089] qcom,cc-debug-8909 1874000.qcom,cc-debug: Registered Debug Mux successfully
  871. <6>[ 3.367948] clock_late_init: Removing enables held for handed-off clocks
  872. <3>[ 3.368970] msm8x16-asoc-wcd sound.68: ASoC: CODEC (null) not registered
  873. <3>[ 3.369011] msm8x16-asoc-wcd sound.68: snd_soc_register_card failed (-517)
  874. <6>[ 3.369074] platform sound.68: Driver msm8x16-asoc-wcd requests probe deferral
  875. <6>[ 3.369180] spmi msm8x16_wcd_codec-ee337a00: Driver wcd-spmi-core requests probe deferral
  876. <6>[ 3.369227] spmi msm8x16_wcd_codec-ee337c00: Driver wcd-spmi-core requests probe deferral
  877. <6>[ 3.369930] msm8x16-asoc-wcd sound.68: default codec configured
  878. <7>[ 3.370209] _gpio_request: gpio-1008 (ext_spk_pa_left_amp_gpio) status -16
  879. <3>[ 3.370217] msm8x16_ext_spk_pa_init: gpio_request failed for ext_spk_pa_left_amp_gpio.
  880. <3>[ 3.371545] msm8x16-asoc-wcd sound.68: ASoC: CODEC (null) not registered
  881. <3>[ 3.371579] msm8x16-asoc-wcd sound.68: snd_soc_register_card failed (-517)
  882. <6>[ 3.371632] platform sound.68: Driver msm8x16-asoc-wcd requests probe deferral
  883. <6>[ 3.373130] ALSA device list:
  884. <6>[ 3.373137] No soundcards found.
  885. <3>[ 3.373960] Warning: unable to open an initial console.
  886. <6>[ 3.374037] Freeing unused kernel memory: 60K (c1100000 - c110f000)
  887. <13>[ 3.376236] init: init started!
  888. <7>[ 3.380898] SELinux: 2048 avtab hash slots, 4859 rules.
  889. <7>[ 3.383594] SELinux: 2048 avtab hash slots, 4859 rules.
  890. <7>[ 3.383622] SELinux: 1 users, 2 roles, 530 types, 0 bools, 1 sens, 1024 cats
  891. <7>[ 3.383633] SELinux: 87 classes, 4859 rules
  892. <7>[ 3.385615] SELinux: Completing initialization.
  893. <7>[ 3.385628] SELinux: Setting up existing superblocks.
  894. <7>[ 3.385656] SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
  895. <7>[ 3.385675] SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
  896. <7>[ 3.386141] SELinux: initialized (dev bdev, type bdev), not configured for labeling
  897. <7>[ 3.386163] SELinux: initialized (dev proc, type proc), uses genfs_contexts
  898. <7>[ 3.386192] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
  899. <7>[ 3.386220] SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
  900. <7>[ 3.393286] SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
  901. <7>[ 3.393314] SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
  902. <7>[ 3.393329] SELinux: initialized (dev anon_inodefs, type anon_inodefs), not configured for labeling
  903. <7>[ 3.393343] SELinux: initialized (dev devpts, type devpts), uses transition SIDs
  904. <7>[ 3.393376] SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
  905. <7>[ 3.393441] SELinux: initialized (dev configfs, type configfs), not configured for labeling
  906. <7>[ 3.393453] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
  907. <7>[ 3.393480] SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
  908. <6>[ 3.433784] power_supply_set_supply_type:supply_type=4
  909. <6>[ 3.437780] msm_hsusb msm_hsusb: CI13XXX_CONTROLLER_RESET_EVENT received
  910. <6>[ 3.437796] msm_hsusb msm_hsusb: CI13XXX_CONTROLLER_CONNECT_EVENT received
  911. <5>[ 3.479959] type=1403 audit(6718575.609:2): policy loaded auid=4294967295 ses=4294967295
  912. <5>[ 3.480452] type=1404 audit(6718575.609:3): enforcing=1 old_enforcing=0 auid=4294967295 ses=4294967295
  913. <13>[ 3.583971] init: (Initializing SELinux enforcing took 0.21s.)
  914. <5>[ 3.590071] type=1400 audit(6718575.719:4): avc: denied { module_request } for pid=1 comm="init" kmod="personality-8" scontext=u:r:init:s0 tcontext=u:r:kernel:s0 tclass=system permissive=0
  915. <13>[ 3.590505] init: init second stage started!
  916. <11>[ 3.590956] init: property_set("ro.boot.bootdevice", "7824900.sdhci") failed
  917. <11>[ 4.304730] init: waitpid failed: No child processes
  918. <13>[ 4.306914] init: (Loading properties from /default.prop took 0.00s.)
  919. <11>[ 4.307583] init: /init.rc: 57: invalid command 'load_all_props'
  920. <11>[ 4.307708] init: could not import file '/init.recovery.logd.rc' from '/init.rc'
  921. <13>[ 4.307826] init: (Parsing /init.recovery.usb.rc took 0.00s.)
  922. <11>[ 4.307867] init: could not import file '/init.recovery.qcom.rc' from '/init.rc'
  923. <13>[ 4.307888] init: (Parsing /init.rc took 0.00s.)
  924. <5>[ 4.308017] type=1400 audit(6718576.439:5): avc: denied { setcheckreqprot } for pid=1 comm="init" scontext=u:r:init:s0 tcontext=u:object_r:kernel:s0 tclass=security permissive=0
  925. <13>[ 4.308044] init: write_file: Unable to write to '/sys/fs/selinux/checkreqprot': Permission denied
  926. <5>[ 4.308139] type=1400 audit(6718576.439:6): avc: denied { setcurrent } for pid=1 comm="init" scontext=u:r:init:s0 tcontext=u:r:init:s0 tclass=process permissive=0
  927. <13>[ 4.308212] init: Starting service 'ueventd'...
  928. <13>[ 4.308580] init: Starting service 'healthd'...
  929. <13>[ 4.308877] init: Waiting for /dev/.coldboot_done...
  930. <5>[ 4.309653] type=1400 audit(6718576.439:7): avc: denied { module_request } for pid=227 comm="ueventd" kmod="personality-8" scontext=u:r:ueventd:s0 tcontext=u:r:kernel:s0 tclass=system permissive=0
  931. <13>[ 4.310115] ueventd: ueventd started!
  932. <5>[ 4.310520] type=1400 audit(6718576.439:8): avc: denied { module_request } for pid=228 comm="healthd" kmod="personality-8" scontext=u:r:healthd:s0 tcontext=u:r:kernel:s0 tclass=system permissive=0
  933. <11>[ 5.309605] init: Timed out waiting for /dev/.coldboot_done
  934. <13>[ 5.309643] init: Waiting for /dev/.coldboot_done took 1.00s.
  935. <11>[ 5.309712] init: /dev/hw_random not found
  936. <7>[ 5.310840] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
  937. <11>[ 5.311157] init: /dev/hw_random not found
  938. <7>[ 5.312106] SELinux: initialized (dev functionfs, type functionfs), uses genfs_contexts
  939. <3>[ 5.312237] enable_store: android_usb: already disabled
  940. <13>[ 5.312685] init: (Loading properties from /system/build.prop took 0.00s.)
  941. <13>[ 5.312726] init: (Loading properties from /vendor/build.prop took 0.00s.)
  942. <13>[ 5.312763] init: (Loading properties from /factory/factory.prop took 0.00s.)
  943. <11>[ 5.312833] fs_mgr: Cannot open file /fstab.qcom
  944. <11>[ 5.312854] init: unable to read fstab /fstab.qcom: No such file or directory
  945. <13>[ 5.312906] init: (Loading properties from /data/local.prop took 0.00s.)
  946. <11>[ 5.312941] init: Unable to open persistent property directory "/data/property": No such file or directory
  947. <13>[ 5.313802] init: Starting service 'set_permissive'...
  948. <5>[ 5.315600] type=1400 audit(6718577.449:9): avc: denied { module_request } for pid=229 comm="permissive.sh" kmod="personality-8" scontext=u:r:recovery:s0 tcontext=u:r:kernel:s0 tclass=system permissive=1
  949. <11>[ 5.315790] init: Warning! Service recovery needs a SELinux domain defined; please fix!
  950. <13>[ 5.315812] init: Starting service 'recovery'...
  951. <13>[ 5.316354] init: Starting service 'adbd'...
  952. <5>[ 5.316561] type=1400 audit(6718577.449:10): avc: denied { execute_no_trans } for pid=232 comm="init" path="/sbin/recovery" dev="rootfs" ino=6272 scontext=u:r:init:s0 tcontext=u:object_r:rootfs:s0 tclass=file permissive=0
  953. <11>[ 5.316652] init: cannot execve('/sbin/recovery'): Permission denied
  954. <13>[ 5.317067] init: Service 'recovery' (pid 232) exited with status 127
  955. <13>[ 5.317100] init: Service 'recovery' (pid 232) killing any children in process group
  956. <6>[ 5.320872] read descriptors
  957. <6>[ 5.320890] read descriptors
  958. <6>[ 5.320901] read strings
  959. <6>[ 5.320928] mtp_bind_config
  960. <6>[ 5.321006] msm_hsusb msm_hsusb: CI13XXX_CONTROLLER_CONNECT_EVENT received
  961. <13>[ 5.342206] init: Service 'set_permissive' (pid 229) exited with status 0
  962. <6>[ 5.465646] power_supply_set_supply_type:supply_type=4
  963. <6>[ 5.465691] msm_otg 78d9000.usb: Avail curr from USB = 100
  964. <6>[ 5.465837] android_work: android_work: did not send uevent (0 0 (null))
  965. <6>[ 5.584273] android_work: android_work: sent uevent USB_STATE=CONNECTED
  966. <6>[ 5.587731] power_supply_set_supply_type:supply_type=4
  967. <6>[ 5.587944] android_work: android_work: sent uevent USB_STATE=DISCONNECTED
  968. <6>[ 5.724201] android_work: android_work: sent uevent USB_STATE=CONNECTED
  969. <6>[ 5.725600] android_usb gadget: high-speed config #1: 86000c8.android_usb
  970. <6>[ 5.725658] power_supply_set_supply_type:supply_type=4
  971. <6>[ 5.725689] msm_otg 78d9000.usb: Avail curr from USB = 500
  972. <6>[ 5.783800] android_work: android_work: sent uevent USB_STATE=CONFIGURED
  973. <13>[ 6.119340] ueventd: Coldboot took 1.80s.
  974. <11>[ 10.347658] init: Warning! Service recovery needs a SELinux domain defined; please fix!
  975. <13>[ 10.347682] init: Starting service 'recovery'...
  976. <4>[ 10.348306] audit_printk_skb: 12 callbacks suppressed
  977. <5>[ 10.348317] type=1400 audit(6718582.479:15): avc: denied { execute_no_trans } for pid=240 comm="init" path="/sbin/recovery" dev="rootfs" ino=6272 scontext=u:r:init:s0 tcontext=u:object_r:rootfs:s0 tclass=file permissive=1
  978. <5>[ 10.349429] type=1400 audit(6718582.479:16): avc: denied { module_request } for pid=240 comm="recovery" kmod="personality-8" scontext=u:r:init:s0 tcontext=u:r:kernel:s0 tclass=system permissive=1
  979. <5>[ 10.392001] type=1400 audit(6718582.519:17): avc: denied { append } for pid=240 comm="recovery" path="/tmp/recovery.log" dev="tmpfs" ino=8242 scontext=u:r:init:s0 tcontext=u:object_r:init_tmpfs:s0 tclass=file permissive=1
  980. <5>[ 10.392185] type=1400 audit(6718582.519:18): avc: denied { write } for pid=240 comm="recovery" name="property_service" dev="tmpfs" ino=7280 scontext=u:r:init:s0 tcontext=u:object_r:property_socket:s0 tclass=sock_file permissive=1
  981. <5>[ 10.394524] type=1400 audit(6718582.529:19): avc: denied { write } for pid=240 comm="recovery" name="fb0" dev="tmpfs" ino=10471 scontext=u:r:init:s0 tcontext=u:object_r:graphics_device:s0 tclass=chr_file permissive=1
  982. <5>[ 10.394801] type=1400 audit(6718582.529:20): avc: denied { ioctl } for pid=240 comm="recovery" path="/dev/graphics/fb0" dev="tmpfs" ino=10471 ioctlcmd=4602 scontext=u:r:init:s0 tcontext=u:object_r:graphics_device:s0 tclass=chr_file permissive=1
  983. <3>[ 10.395072] mdss_dsi_panel_off--S
  984. <3>[ 10.395130] mdss_dsi_ack_err_status: status=1008000
  985. <3>[ 10.673335] mdss_dsi_panel_off--E
  986. <3>[ 10.720540] [zwt]+++ delay 120 then disabel bias
  987. <6>[ 10.840554] [zwt]mdss_tps62561_enable: lcm_bias_enable is set to 0
  988. <3>[ 11.755655] mdp3_iommu_disable: iommu ref count unbalanced for client 0
  989. <3>[ 11.758460] [zwt]+++ delay 120 then enable bias
  990. <3>[ 11.763480] [zwt]mdss_tps62561_enable: reuqest successfully lcm_bias_enable is set to 1
  991. <3>[ 11.825617] mdss_dsi_panel_on--S
  992. <3>[ 12.090045] mdss_dsi_panel_on--E
  993. <6>[ 12.090128] mdss_dsi_panel_bl_ctrl:bl_level = 100
  994. <3>[ 12.098053] mdss_dsi_panel_off--S
  995. <3>[ 12.487887] mdss_dsi_panel_off--E
  996. <3>[ 12.514063] [zwt]+++ delay 120 then disabel bias
  997. <6>[ 12.634073] [zwt]mdss_tps62561_enable: lcm_bias_enable is set to 0
  998. <4>[ 13.556275] gt9xx_ts_pm_worker():lcd status FB_BLANK_POWERDOWN
  999. <4>[ 13.556279] <<-GTP-INFO->> goodix_ts_suspend enter
  1000. <4>[ 13.556283] pangle trace resume
  1001. <4>[ 13.556287] <<-GTP-INFO->> Esd cancelled
  1002. <3>[ 13.558173] [zwt]+++ delay 120 then enable bias
  1003. <3>[ 13.563185] [zwt]mdss_tps62561_enable: reuqest successfully lcm_bias_enable is set to 1
  1004. <4>[ 13.573859] <<-GTP-INFO->> GTP enter sleep!
  1005. <3>[ 13.625265] mdss_dsi_panel_on--S
  1006. <4>[ 13.643800] <<-GTP-INFO->> tp suspend
  1007. <4>[ 13.643800]
  1008. <3>[ 13.886420] mdss_dsi_panel_on--E
  1009. <6>[ 13.886497] mdss_dsi_panel_bl_ctrl:bl_level = 100
  1010. <4>[ 13.886609] gt9xx_ts_pm_worker():lcd status FB_BLANK_UNBLANK
  1011. <4>[ 13.886611] pangle trace resume
  1012. <4>[ 13.886640] <<-GTP-INFO->> Powerkey wakeup.
  1013. <5>[ 13.952460] type=1400 audit(6718586.079:21): avc: denied { execmem } for pid=240 comm="recovery" scontext=u:r:init:s0 tcontext=u:r:init:s0 tclass=process permissive=1
  1014. <5>[ 13.952515] type=1400 audit(6718586.079:22): avc: denied { execute } for pid=240 comm="recovery" path="/dev/ashmem" dev="tmpfs" ino=10405 scontext=u:r:init:s0 tcontext=u:object_r:ashmem_device:s0 tclass=chr_file permissive=1
  1015. <5>[ 14.010548] type=1400 audit(6718586.139:23): avc: denied { ioctl } for pid=240 comm="recovery" path="/dev/input/event3" dev="tmpfs" ino=10469 ioctlcmd=4506 scontext=u:r:init:s0 tcontext=u:object_r:input_device:s0 tclass=chr_file permissive=1
  1016. <4>[ 14.053944] <<-GTP-INFO->> GTP wakeup sleep.
  1017. <4>[ 14.054104] <<-GTP-INFO->> Update status for Charger Plugin
  1018. <4>[ 14.054104]
  1019. <4>[ 14.054113] <<-GTP-INFO->> Esd started
  1020. <4>[ 14.054121] <<-GTP-INFO->> tp resume
  1021. <4>[ 14.054121]
  1022. <6>[ 14.090972] EXT4-fs (mmcblk0p23): mounted filesystem with ordered data mode. Opts:
  1023. <7>[ 14.091015] SELinux: initialized (dev mmcblk0p23, type ext4), uses xattr
  1024. <6>[ 14.114274] EXT4-fs (mmcblk0p29): mounted filesystem with ordered data mode. Opts:
  1025. <7>[ 14.114307] SELinux: initialized (dev mmcblk0p29, type ext4), uses xattr
  1026. <5>[ 14.146594] type=1400 audit(6718586.279:24): avc: denied { create } for pid=240 comm="recovery" name="fstab" scontext=u:r:init:s0 tcontext=u:object_r:rootfs:s0 tclass=file permissive=1
  1027. <6>[ 14.167651] EXT4-fs (mmcblk0p21): mounted filesystem with ordered data mode. Opts:
  1028. <7>[ 14.167685] SELinux: initialized (dev mmcblk0p21, type ext4), uses xattr
  1029. <6>[ 14.190899] EXT4-fs (mmcblk0p29): mounted filesystem with ordered data mode. Opts:
  1030. <7>[ 14.190932] SELinux: initialized (dev mmcblk0p29, type ext4), uses xattr
  1031. <6>[ 14.241868] SELinux: Context u:object_r:data_qsee_file:s0 is not valid (left unmapped).
  1032. <6>[ 14.242386] SELinux: Context u:object_r:ipacm_data_file:s0 is not valid (left unmapped).
  1033. <6>[ 14.243011] SELinux: Context u:object_r:display_misc_file:s0 is not valid (left unmapped).
  1034. <6>[ 14.243206] SELinux: Context u:object_r:location_data_file:s0 is not valid (left unmapped).
  1035. <6>[ 14.244333] SELinux: Context u:object_r:location_socket:s0 is not valid (left unmapped).
  1036. <6>[ 14.245116] SELinux: Context u:object_r:qlogd_data_file:s0 is not valid (left unmapped).
  1037. <6>[ 14.245275] SELinux: Context u:object_r:fm_data_file:s0 is not valid (left unmapped).
  1038. <6>[ 14.245432] SELinux: Context u:object_r:RIDL_data_file:s0 is not valid (left unmapped).
  1039. <6>[ 14.246129] SELinux: Context u:object_r:RIDL_socket:s0 is not valid (left unmapped).
  1040. <6>[ 14.246294] SELinux: Context u:object_r:dts_data_file:s0 is not valid (left unmapped).
  1041. <6>[ 14.282254] SELinux: Context u:object_r:qsee_svc_app_data_file:s0 is not valid (left unmapped).
  1042. <6>[ 14.532652] SELinux: Context u:object_r:qtitetherservice_app_data_file:s0 is not valid (left unmapped).
  1043. <6>[ 15.106771] SELinux: Context u:object_r:location_app_data_file:s0 is not valid (left unmapped).
  1044. <4>[ 17.328017] audit_printk_skb: 18 callbacks suppressed
  1045. <5>[ 17.328033] type=1400 audit(6718589.459:31): avc: denied { getattr } for pid=240 comm="recovery" path="/data/data/com.alibaba.aliexpresshd/app_SGLib/app_1530551007/libsgmain_315439200000.zip" dev="mmcblk0p29" ino=532905 scontext=u:r:init:s0 tcontext=u:object_r:app_data_file:s0:c512,c768 tclass=lnk_file permissive=1
  1046. <6>[ 17.587867] SELinux: Context drwx------ is not valid (left unmapped).
  1047. <6>[ 17.596935] SELinux: Context u:object_r:mpctl_data_file:s0 is not valid (left unmapped).
  1048. <5>[ 17.657276] type=1400 audit(6718589.789:32): avc: denied { getattr } for pid=240 comm="recovery" path="/data/user/10/com.google.android.youtube" dev="mmcblk0p29" ino=481445 scontext=u:r:init:s0 tcontext=u:object_r:app_data_file:s0:c522,c768 tclass=dir permissive=1
  1049. <5>[ 17.657348] type=1400 audit(6718589.789:33): avc: denied { read } for pid=240 comm="recovery" name="com.google.android.youtube" dev="mmcblk0p29" ino=481445 scontext=u:r:init:s0 tcontext=u:object_r:app_data_file:s0:c522,c768 tclass=dir permissive=1
  1050. <5>[ 17.657390] type=1400 audit(6718589.789:34): avc: denied { open } for pid=240 comm="recovery" path="/data/user/10/com.google.android.youtube" dev="mmcblk0p29" ino=481445 scontext=u:r:init:s0 tcontext=u:object_r:app_data_file:s0:c522,c768 tclass=dir permissive=1
  1051. <6>[ 17.729944] SELinux: Context u:object_r:cnd_data_file:s0 is not valid (left unmapped).
  1052. <6>[ 17.730791] SELinux: Context u:object_r:dpmd_data_file:s0 is not valid (left unmapped).
  1053. <6>[ 17.733863] SELinux: Context u:object_r:time_data_file:s0 is not valid (left unmapped).
  1054. <6>[ 17.735376] SELinux: Context u:object_r:camera_socket:s0 is not valid (left unmapped).
  1055. <6>[ 18.242771] EXT4-fs (mmcblk0p29): mounted filesystem with ordered data mode. Opts:
  1056. <7>[ 18.242804] SELinux: initialized (dev mmcblk0p29, type ext4), uses xattr
  1057. <5>[ 19.570226] type=1400 audit(6718591.699:35): avc: denied { write } for pid=240 comm="recovery" name="mmcblk0p13" dev="tmpfs" ino=7098 scontext=u:r:init:s0 tcontext=u:object_r:block_device:s0 tclass=blk_file permissive=1
  1058. <5>[ 19.572733] type=1400 audit(6718591.699:36): avc: denied { append } for pid=240 comm="recovery" name="log" dev="mmcblk0p23" ino=8195 scontext=u:r:init:s0 tcontext=u:object_r:cache_file:s0 tclass=file permissive=1
  1059. <6>[ 19.643846] EXT4-fs (mmcblk0p21): mounted filesystem with ordered data mode. Opts:
  1060. <7>[ 19.643879] SELinux: initialized (dev mmcblk0p21, type ext4), uses xattr
  1061. <5>[ 19.645332] type=1400 audit(6718591.779:37): avc: denied { create } for pid=240 comm="recovery" name="orsin" scontext=u:r:init:s0 tcontext=u:object_r:rootfs:s0 tclass=fifo_file permissive=1
  1062. <5>[ 19.645424] type=1400 audit(6718591.779:38): avc: denied { read } for pid=240 comm="recovery" name="orsin" dev="rootfs" ino=7311 scontext=u:r:init:s0 tcontext=u:object_r:rootfs:s0 tclass=fifo_file permissive=1
  1063. <5>[ 19.645464] type=1400 audit(6718591.779:39): avc: denied { open } for pid=240 comm="recovery" path="/sbin/orsin" dev="rootfs" ino=7311 scontext=u:r:init:s0 tcontext=u:object_r:rootfs:s0 tclass=fifo_file permissive=1
  1064. <5>[ 20.422984] type=1400 audit(6718592.559:40): avc: denied { write } for pid=277 comm="recovery" name="mtp_usb" dev="tmpfs" ino=10413 scontext=u:r:init:s0 tcontext=u:object_r:mtp_device:s0 tclass=chr_file permissive=1
  1065. <6>[ 20.423013] mtp_open
  1066. <4>[ 27.754258] audit_printk_skb: 3 callbacks suppressed
  1067. <5>[ 27.754272] type=1400 audit(6718599.889:42): avc: denied { getattr } for pid=240 comm="recovery" path="/proc/sysrq-trigger" dev="proc" ino=4026534166 scontext=u:r:init:s0 tcontext=u:object_r:proc_sysrq:s0 tclass=file permissive=1
  1068. <5>[ 90.893063] type=1400 audit(6718663.029:43): avc: denied { read } for pid=39 comm="kworker/u8:2" path="/data/media/0/kmsg" dev="mmcblk0p29" ino=555307 scontext=u:r:kernel:s0 tcontext=u:object_r:media_rw_data_file:s0 tclass=file permissive=1
Add Comment
Please, Sign In to add comment
Public Pastes
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!