Public Pastes
daily pastebin goal
72%
SHARE
TWEET

Untitled

a guest May 21st, 2017 65 Never
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
  1. sudo smartctl -a /dev/sda
  2. smartctl 6.6 2016-05-31 r4324 [i686-linux-4.10.0-21-generic] (local build)
  3. Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org
  4.  
  5. === START OF INFORMATION SECTION ===
  6. Model Family:     Crucial/Micron RealSSD m4/C400/P400
  7. Device Model:     M4-CT128M4SSD2
  8. Serial Number:    000000001203032B4346
  9. LU WWN Device Id: 5 00a075 1032b4346
  10. Firmware Version: 0309
  11. User Capacity:    128 035 676 160 bytes [128 GB]
  12. Sector Size:      512 bytes logical/physical
  13. Rotation Rate:    Solid State Device
  14. Form Factor:      2.5 inches
  15. Device is:        In smartctl database [for details use: -P show]
  16. ATA Version is:   ACS-2, ATA8-ACS T13/1699-D revision 6
  17. SATA Version is:  SATA 3.0, 6.0 Gb/s (current: 3.0 Gb/s)
  18. Local Time is:    Sun May 21 19:10:39 2017 CEST
  19. SMART support is: Available - device has SMART capability.
  20. SMART support is: Enabled
  21.  
  22. === START OF READ SMART DATA SECTION ===
  23. SMART overall-health self-assessment test result: PASSED
  24.  
  25. General SMART Values:
  26. Offline data collection status:  (0x80) Offline data collection activity
  27.                                         was never started.
  28.                                         Auto Offline Data Collection: Enabled.
  29. Self-test execution status:      (   0) The previous self-test routine completed
  30.                                         without error or no self-test has ever
  31.                                         been run.
  32. Total time to complete Offline
  33. data collection:                (  595) seconds.
  34. Offline data collection
  35. capabilities:                    (0x7b) SMART execute Offline immediate.
  36.                                         Auto Offline data collection on/off support.
  37.                                         Suspend Offline collection upon new
  38.                                         command.
  39.                                         Offline surface scan supported.
  40.                                         Self-test supported.
  41.                                         Conveyance Self-test supported.
  42.                                         Selective Self-test supported.
  43. SMART capabilities:            (0x0003) Saves SMART data before entering
  44.                                         power-saving mode.
  45.                                         Supports SMART auto save timer.
  46. Error logging capability:        (0x01) Error logging supported.
  47.                                         General Purpose Logging supported.
  48. Short self-test routine
  49. recommended polling time:        (   2) minutes.
  50. Extended self-test routine
  51. recommended polling time:        (   9) minutes.
  52. Conveyance self-test routine
  53. recommended polling time:        (   3) minutes.
  54. SCT capabilities:              (0x003d) SCT Status supported.
  55.                                         SCT Error Recovery Control supported.
  56.                                         SCT Feature Control supported.
  57.                                         SCT Data Table supported.
  58.  
  59. SMART Attributes Data Structure revision number: 16
  60. Vendor Specific SMART Attributes with Thresholds:
  61. ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  62.   1 Raw_Read_Error_Rate     0x002f   089   089   050    Pre-fail  Always       -       14
  63.   5 Reallocated_Sector_Ct   0x0033   100   100   010    Pre-fail  Always       -       0
  64.   9 Power_On_Hours          0x0032   100   100   001    Old_age   Always       -       15593
  65.  12 Power_Cycle_Count       0x0032   100   100   001    Old_age   Always       -       9268
  66. 170 Grown_Failing_Block_Ct  0x0033   100   100   010    Pre-fail  Always       -       0
  67. 171 Program_Fail_Count      0x0032   100   100   001    Old_age   Always       -       0
  68. 172 Erase_Fail_Count        0x0032   100   100   001    Old_age   Always       -       0
  69. 173 Wear_Leveling_Count     0x0033   089   089   010    Pre-fail  Always       -       353
  70. 174 Unexpect_Power_Loss_Ct  0x0032   100   100   001    Old_age   Always       -       37
  71. 181 Non4k_Aligned_Access    0x0022   100   100   001    Old_age   Always       -       6204 2841 3363
  72. 183 SATA_Iface_Downshift    0x0032   100   100   001    Old_age   Always       -       1
  73. 184 End-to-End_Error        0x0033   100   100   050    Pre-fail  Always       -       0
  74. 187 Reported_Uncorrect      0x0032   100   100   001    Old_age   Always       -       116046
  75. 188 Command_Timeout         0x0032   100   100   001    Old_age   Always       -       0
  76. 189 Factory_Bad_Block_Ct    0x000e   100   100   001    Old_age   Always       -       122
  77. 194 Temperature_Celsius     0x0022   100   100   000    Old_age   Always       -       0
  78. 195 Hardware_ECC_Recovered  0x003a   100   100   001    Old_age   Always       -       26461
  79. 196 Reallocated_Event_Count 0x0032   100   100   001    Old_age   Always       -       0
  80. 197 Current_Pending_Sector  0x0032   100   100   001    Old_age   Always       -       0
  81. 198 Offline_Uncorrectable   0x0030   100   100   001    Old_age   Offline      -       0
  82. 199 UDMA_CRC_Error_Count    0x0032   100   100   001    Old_age   Always       -       0
  83. 202 Perc_Rated_Life_Used    0x0018   089   089   001    Old_age   Offline      -       11
  84. 206 Write_Error_Rate        0x000e   100   100   001    Old_age   Always       -       0
  85.  
  86. SMART Error Log Version: 1
  87. Warning: ATA error count 0 inconsistent with error log pointer 4
  88.  
  89. ATA Error Count: 0
  90.         CR = Command Register [HEX]
  91.         FR = Features Register [HEX]
  92.         SC = Sector Count Register [HEX]
  93.         SN = Sector Number Register [HEX]
  94.         CL = Cylinder Low Register [HEX]
  95.         CH = Cylinder High Register [HEX]
  96.         DH = Device/Head Register [HEX]
  97.         DC = Device Command Register [HEX]
  98.         ER = Error register [HEX]
  99.         ST = Status register [HEX]
  100. Powered_Up_Time is measured from power on, and printed as
  101. DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
  102. SS=sec, and sss=millisec. It "wraps" after 49.710 days.
  103.  
  104. Error 0 occurred at disk power-on lifetime: 15593 hours (649 days + 17 hours)
  105.   When the command that caused the error occurred, the device was active or idle.
  106.  
  107.   After command completion occurred, registers were:
  108.   ER ST SC SN CL CH DH
  109.   -- -- -- -- -- -- --
  110.   00 50 08 88 9c 4c 40   at LBA = 0x004c9c88 = 5020808
  111.  
  112.   Commands leading to the command that caused the error were:
  113.   CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  114.   -- -- -- -- -- -- -- --  ----------------  --------------------
  115.   60 10 08 88 9c 4c 40 00   3d+11:30:45.152  READ FPDMA QUEUED
  116.   ef 10 02 00 00 00 a0 00   3d+11:30:45.152  SET FEATURES [Enable SATA feature]
  117.   27 00 00 00 00 00 e0 00   3d+11:30:45.152  READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
  118.   ec 00 00 00 00 00 a0 00   3d+11:30:45.152  IDENTIFY DEVICE
  119.   ef 03 45 00 00 00 a0 00   3d+11:30:45.152  SET FEATURES [Set transfer mode]
  120.  
  121. Error -1 occurred at disk power-on lifetime: 15593 hours (649 days + 17 hours)
  122.   When the command that caused the error occurred, the device was active or idle.
  123.  
  124.   After command completion occurred, registers were:
  125.   ER ST SC SN CL CH DH
  126.   -- -- -- -- -- -- --
  127.   00 50 08 88 9c 4c 40   at LBA = 0x004c9c88 = 5020808
  128.  
  129.   Commands leading to the command that caused the error were:
  130.   CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  131.   -- -- -- -- -- -- -- --  ----------------  --------------------
  132.   60 10 08 88 9c 4c 40 00   3d+11:30:45.152  READ FPDMA QUEUED
  133.   60 00 08 50 9d 4c 40 00   3d+11:30:45.152  READ FPDMA QUEUED
  134.   60 00 08 48 9d 4c 40 00   3d+11:30:45.152  READ FPDMA QUEUED
  135.   60 03 08 40 9d 4c 40 00   3d+11:30:45.152  READ FPDMA QUEUED
  136.   60 10 08 38 9d 4c 40 00   3d+11:30:45.152  READ FPDMA QUEUED
  137.  
  138. Error -2 occurred at disk power-on lifetime: 15593 hours (649 days + 17 hours)
  139.   When the command that caused the error occurred, the device was active or idle.
  140.  
  141.   After command completion occurred, registers were:
  142.   ER ST SC SN CL CH DH
  143.   -- -- -- -- -- -- --
  144.   00 50 08 88 9c 4c 40   at LBA = 0x004c9c88 = 5020808
  145.  
  146.   Commands leading to the command that caused the error were:
  147.   CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  148.   -- -- -- -- -- -- -- --  ----------------  --------------------
  149.   60 00 08 88 9c 4c 40 00   3d+11:30:45.152  READ FPDMA QUEUED
  150.   ef 10 02 00 00 00 a0 00   3d+11:30:45.152  SET FEATURES [Enable SATA feature]
  151.   27 00 00 00 00 00 e0 00   3d+11:30:45.152  READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
  152.   ec 00 00 00 00 00 a0 00   3d+11:30:45.152  IDENTIFY DEVICE
  153.   ef 03 45 00 00 00 a0 00   3d+11:30:45.152  SET FEATURES [Set transfer mode]
  154.  
  155. Error -3 occurred at disk power-on lifetime: 15593 hours (649 days + 17 hours)
  156.   When the command that caused the error occurred, the device was active or idle.
  157.  
  158.   After command completion occurred, registers were:
  159.   ER ST SC SN CL CH DH
  160.   -- -- -- -- -- -- --
  161.   00 50 08 88 9c 4c 40   at LBA = 0x004c9c88 = 5020808
  162.  
  163.   Commands leading to the command that caused the error were:
  164.   CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  165.   -- -- -- -- -- -- -- --  ----------------  --------------------
  166.   60 00 08 88 9c 4c 40 00   3d+11:30:45.152  READ FPDMA QUEUED
  167.   ef 10 02 00 00 00 a0 00   3d+11:30:45.152  SET FEATURES [Enable SATA feature]
  168.   27 00 00 00 00 00 e0 00   3d+11:30:45.152  READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
  169.   ec 00 00 00 00 00 a0 00   3d+11:30:45.152  IDENTIFY DEVICE
  170.   ef 03 45 00 00 00 a0 00   3d+11:30:45.152  SET FEATURES [Set transfer mode]
  171.  
  172. Error -4 occurred at disk power-on lifetime: 15593 hours (649 days + 17 hours)
  173.   When the command that caused the error occurred, the device was active or idle.
  174.  
  175.   After command completion occurred, registers were:
  176.   ER ST SC SN CL CH DH
  177.   -- -- -- -- -- -- --
  178.   00 50 08 88 9c 4c 40   at LBA = 0x004c9c88 = 5020808
  179.  
  180.   Commands leading to the command that caused the error were:
  181.   CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  182.   -- -- -- -- -- -- -- --  ----------------  --------------------
  183.   60 00 08 88 9c 4c 40 00   3d+11:30:45.152  READ FPDMA QUEUED
  184.   60 00 08 80 9c 4c 40 00   3d+11:30:45.152  READ FPDMA QUEUED
  185.   60 00 08 78 9c 4c 40 00   3d+11:30:45.152  READ FPDMA QUEUED
  186.   60 00 08 70 9c 4c 40 00   3d+11:30:45.152  READ FPDMA QUEUED
  187.   60 00 08 68 9c 4c 40 00   3d+11:30:45.152  READ FPDMA QUEUED
  188.  
  189. SMART Self-test log structure revision number 1
  190. No self-tests have been logged.  [To run self-tests, use: smartctl -t]
  191.  
  192. SMART Selective self-test log data structure revision number 1
  193.  SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
  194.     1        0        0  Not_testing
  195.     2        0        0  Not_testing
  196.     3        0        0  Not_testing
  197.     4        0        0  Not_testing
  198.     5        0        0  Not_testing
  199. Selective self-test flags (0x0):
  200.   After scanning selected spans, do NOT read-scan remainder of disk.
  201. If Selective self-test is pending on power-up, resume after 0 minute delay.
RAW Paste Data
Top