12/08/22_beta14

Aug 12 13:49:29 router wan-failover.sh: Debug - Trap set to kill background process on exit
Aug 12 13:49:29 router wan-failover.sh: Debug - Script Mode: monitor
Aug 12 13:49:29 router wan-failover.sh: Debug - Function: monitor
Aug 12 13:49:29 router wan-failover.sh: Debug - Setting System Binaries Path
Aug 12 13:49:29 router wan-failover.sh: Debug - PATH: /sbin:/bin:/usr/sbin:/usr/bin:/opt/bin:/opt/sbin:/bin:/usr/bin:/sbin:/usr/sbin:/home/superadmin:/mmc/sbin:/mmc/bin:/mmc/usr/sbin:/mmc/usr/bin:/opt/sbin:/opt/bin:/opt/usr/sbin:/opt/usr/bin
Aug 12 13:49:29 router wan-failover.sh: Debug - Checking if Scribe is Installed
Aug 12 13:49:29 router wan-failover.sh: Debug - Scribe is installed, using System Log Path: /opt/var/log/messages
Aug 12 13:50:08 router wan-failover.sh: Debug - Script Mode: cron
Aug 12 13:50:08 router wan-failover.sh: Debug - Function: cronjob
Aug 12 13:50:13 router wan-failover.sh: Debug - Script Mode: cron
Aug 12 13:50:13 router wan-failover.sh: Debug - Script Mode: cron
Aug 12 13:50:13 router wan-failover.sh: Debug - Function: cronjob
Aug 12 13:50:13 router wan-failover.sh: Debug - Function: cronjob
Aug 12 13:50:13 router wan-failover.sh: Debug - Script Mode: cron
Aug 12 13:50:13 router wan-failover.sh: Debug - Function: cronjob
Aug 12 13:50:14 router wan-failover.sh: Debug - Script Mode: cron
Aug 12 13:50:14 router wan-failover.sh: Debug - Function: cronjob
Aug 12 13:50:16 router wan-failover.sh: Packet Loss Detected - WAN0 Packet Loss: 40%
Aug 12 13:50:16 router wan-failover.sh: Debug - WAN0 Target IP Rule Missing or Default Route for 100 is invalid
Aug 12 13:50:16 router wan-failover.sh: Debug - Function: failover
Aug 12 13:50:16 router wan-failover.sh: Debug - Function: switchwan
Aug 12 13:50:16 router wan-failover.sh: Debug - Function: nvramcheck
Aug 12 13:50:16 router wan-failover.sh: Debug - ***NVRAM Check Passed***
Aug 12 13:50:16 router wan-failover.sh: Debug - Inactive WAN: wan0
Aug 12 13:50:16 router wan-failover.sh: Debug - Active WAN: wan1
Aug 12 13:50:16 router wan-failover.sh: WAN Switch - Switching wan1 to Primary WAN
Aug 12 13:50:16 router wan-failover.sh: WAN Switch - WAN IP Address: 192.168.199.100
Aug 12 13:50:16 router wan-failover.sh: WAN Switch - WAN Gateway IP: 192.168.199.1
Aug 12 13:50:16 router wan-failover.sh: WAN Switch - WAN Interface: eth1
Aug 12 13:50:16 router wan-failover.sh: WAN Switch - Adding default route via 192.168.199.1 dev eth1
Aug 12 13:50:16 router wan-failover.sh: WAN Switch - Added default route via 192.168.199.1 dev eth1
Aug 12 13:50:16 router wan-failover.sh: Debug - QoS is Enabled
Aug 12 13:50:16 router wan-failover.sh: WAN Switch - Applying Manual QoS Bandwidth Settings
Aug 12 13:50:16 router wan-failover.sh: WAN Switch - Applied Manual QoS Bandwidth Settings
Aug 12 13:50:16 router wan-failover.sh: Debug - Outbound Bandwidth: 20480
Aug 12 13:50:16 router wan-failover.sh: Debug - Inbound Bandwidth: 20480
Aug 12 13:50:16 router wan-failover.sh: Debug - QoS Overhead: 0
Aug 12 13:50:16 router wan-failover.sh: Debug - QoS ATM: 0
Aug 12 13:50:16 router wan-failover.sh: WAN Switch - QoS Settings: Upload Bandwidth: 20Mbps
Aug 12 13:50:16 router wan-failover.sh: WAN Switch - QoS Settings: Download Bandwidth: 20Mbps
Aug 12 13:50:17 router wan-failover.sh: WAN Switch - Switched wan1 to Primary WAN
Aug 12 13:50:17 router wan-failover.sh: Debug - Function: switchdns
Aug 12 13:50:17 router wan-failover.sh: Debug - Function: nvramcheck
Aug 12 13:50:17 router wan-failover.sh: Debug - ***NVRAM Check Passed***
Aug 12 13:50:17 router wan-failover.sh: Debug - Setting WAN0 Status for DNS Switch
Aug 12 13:50:17 router wan-failover.sh: DNS Switch - DNS is being managed by AdGuard
Aug 12 13:50:17 router wan-failover.sh: Debug - Function: restartservices
Aug 12 13:50:17 router wan-failover.sh: Debug - Function: nvramcheck
Aug 12 13:50:17 router wan-failover.sh: Debug - ***NVRAM Check Passed***
Aug 12 13:50:17 router wan-failover.sh: Debug - Checking which services need to be restarted
Aug 12 13:50:17 router wan-failover.sh: Debug - Dnsmasq is running
Aug 12 13:50:17 router wan-failover.sh: Debug - Firewall is enabled
Aug 12 13:50:17 router wan-failover.sh: Debug - LEDs are enabled
Aug 12 13:50:17 router wan-failover.sh: Debug - QoS is enabled
Aug 12 13:50:17 router wan-failover.sh: Debug - IPv6 6in4 is enabled
Aug 12 13:50:17 router wan-failover.sh: Service Restart - Restarting dnsmasq service
Aug 12 13:50:17 router wan-failover.sh: Service Restart - Restarted dnsmasq service
Aug 12 13:50:17 router wan-failover.sh: Service Restart - Restarting firewall service
Aug 12 13:50:24 router wan-failover.sh: Service Restart - Restarted firewall service
Aug 12 13:50:24 router wan-failover.sh: Service Restart - Restarting leds service
Aug 12 13:50:25 router wan-failover.sh: Service Restart - Restarted leds service
Aug 12 13:50:25 router wan-failover.sh: Service Restart - Restarting qos service
Aug 12 13:50:26 router wan-failover.sh: Service Restart - Restarted qos service
Aug 12 13:50:26 router wan-failover.sh: Service Restart - Restarting wan6 service
Aug 12 13:50:32 router wan-failover.sh: Service Restart - Restarted wan6 service
Aug 12 13:50:32 router wan-failover.sh: Debug - Checking if OpenVPN Server instances exist and are enabled
Aug 12 13:50:32 router wan-failover.sh: Debug - Checking if YazFi is installed and scheduled in Cron Jobs
Aug 12 13:50:32 router wan-failover.sh: Debug - Checking if VPNMON-R2 is installed, configured, and running
Aug 12 13:50:32 router wan-failover.sh: Debug - Function: checkiprules
Aug 12 13:50:32 router wan-failover.sh: Debug - Function: nvramcheck
Aug 12 13:50:32 router wan-failover.sh: Debug - ***NVRAM Check Passed***
Aug 12 13:50:32 router wan-failover.sh: Debug - Setting WAN0 Status for Check IP Rules
Aug 12 13:50:32 router wan-failover.sh: Debug - Setting WAN0 Status for Check IP Rules
Aug 12 13:50:32 router wan-failover.sh: Debug - HTTP Web Access: 1
Aug 12 13:50:32 router wan-failover.sh: Debug - wan1 UPNP Enabled: 1
Aug 12 13:50:32 router wan-failover.sh: Debug - wan1 NAT Enabled: 1
Aug 12 13:50:32 router wan-failover.sh: Debug - Function: sendemail
Aug 12 13:50:32 router wan-failover.sh: Debug - Function: nvramcheck
Aug 12 13:50:32 router wan-failover.sh: Debug - ***NVRAM Check Passed***
Aug 12 13:50:32 router wan-failover.sh: Debug - Checking if /tmp/wan-failover-mail exists
Aug 12 13:50:32 router wan-failover.sh: Debug - Selecting Subject Name
Aug 12 13:50:32 router wan-failover.sh: Debug - Selecting From Name
Aug 12 13:50:32 router wan-failover.sh: Debug - Selecting Email Header
Aug 12 13:50:32 router wan-failover.sh: Debug - Selecting Hostname
Aug 12 13:50:32 router wan-failover.sh: Debug - DDNS Hostname: sinema.asuscomm.com
Aug 12 13:50:32 router wan-failover.sh: Debug - Selecting Parameters based on Dual WAN Mode: fo
Aug 12 13:50:32 router wan-failover.sh: Debug - WAN0 Status: CONNECTED
Aug 12 13:50:32 router wan-failover.sh: Debug - WAN1 Status: CONNECTED
Aug 12 13:50:32 router wan-failover.sh: Debug - Connecting to ipinfo.io for Active ISP
Aug 12 13:50:32 router wan-failover.sh: Debug - WAN IP Address: 192.168.199.100
Aug 12 13:50:32 router wan-failover.sh: Debug - IPv6 IP Address:
Aug 12 13:50:32 router wan-failover.sh: Debug - WAN Gateway IP Address: 192.168.199.1
Aug 12 13:50:32 router wan-failover.sh: Debug - WAN Interface: eth1
Aug 12 13:50:32 router wan-failover.sh: Debug - Checking if AdGuardHome is running
Aug 12 13:50:32 router wan-failover.sh: Debug - QoS Enabled: 1
Aug 12 13:50:32 router wan-failover.sh: Debug - QoS Outbound Bandwidth: 20480
Aug 12 13:50:32 router wan-failover.sh: Debug - QoS Inbound Bandwidth: 20480
Aug 12 13:50:32 router wan-failover.sh: Debug - QoS WAN Packet Overhead: 0
Aug 12 13:50:32 router wan-failover.sh: Debug - Selecting AMTM or AIProtection for Email Notification
Aug 12 13:50:32 router wan-failover.sh: Debug - AMTM Email Configuration Detected
Aug 12 13:50:35 router wan-failover.sh: Email Notification - Email Notification via amtm Sent
Aug 12 13:50:35 router wan-failover.sh: Debug - Function: wanstatus
Aug 12 13:50:35 router wan-failover.sh: Debug - Function: nvramcheck
Aug 12 13:50:35 router wan-failover.sh: Debug - ***NVRAM Check Passed***
Aug 12 13:50:35 router wan-failover.sh: Debug - System Uptime: 1551 Seconds
Aug 12 13:50:35 router wan-failover.sh: Debug - Boot Delay Timer: 0 Seconds
Aug 12 13:50:35 router wan-failover.sh: Debug - Setting parameters for wan0
Aug 12 13:50:35 router wan-failover.sh: WAN Status - wan0 disabled
Aug 12 13:50:35 router wan-failover.sh: Debug - wan0 Status: DISABLED
Aug 12 13:50:35 router wan-failover.sh: Debug - Function: setwanstatus
Aug 12 13:50:35 router wan-failover.sh: Debug - Setting parameters for wan1
Aug 12 13:50:35 router wan-failover.sh: WAN Status - wan1 enabled
Aug 12 13:50:35 router wan-failover.sh: Debug - Checking wan1 State
Aug 12 13:50:35 router wan-failover.sh: Debug - Checking wan1 for null IP or Gateway
Aug 12 13:50:35 router wan-failover.sh: Debug - Checking wan1 for Default Route in 200
Aug 12 13:50:35 router wan-failover.sh: Debug - Checking wan1 for IP Rule to 119.28.28.28
Aug 12 13:50:35 router wan-failover.sh: Debug - Recursive Ping Check: 1
Aug 12 13:50:35 router wan-failover.sh: Debug - Checking wan1 for packet loss via 119.28.28.28 - Attempt: 1
Aug 12 13:50:39 router wan-failover.sh: Debug - wan1 Packet Loss: 0%%
Aug 12 13:50:39 router wan-failover.sh: WAN Status - wan1 has 0% packet loss
Aug 12 13:50:39 router wan-failover.sh: Debug - wan1 Status: CONNECTED
Aug 12 13:50:39 router wan-failover.sh: Debug - Function: setwanstatus
Aug 12 13:50:39 router wan-failover.sh: Debug - Function: debuglog
Aug 12 13:50:39 router wan-failover.sh: Debug - Function: nvramcheck
Aug 12 13:50:39 router wan-failover.sh: Debug - ***NVRAM Check Passed***
Aug 12 13:50:39 router wan-failover.sh: Debug - Model: RT-AX88U
Aug 12 13:50:39 router wan-failover.sh: Debug - Product ID: RT-AX88U
Aug 12 13:50:39 router wan-failover.sh: Debug - Build Name: RT-AX88U
Aug 12 13:50:39 router wan-failover.sh: Debug - Firmware: 386.7
Aug 12 13:50:39 router wan-failover.sh: Debug - IPRoute Version: 5.11.0
Aug 12 13:50:39 router wan-failover.sh: Debug - WAN Capability: wan usb lan
Aug 12 13:50:39 router wan-failover.sh: Debug - Dual WAN Mode: fo
Aug 12 13:50:39 router wan-failover.sh: Debug - Load Balance Ratio: 5:1
Aug 12 13:50:39 router wan-failover.sh: Debug - Dual WAN Interfaces: wan lan
Aug 12 13:50:39 router wan-failover.sh: Debug - ASUS Factory Watchdog: 0
Aug 12 13:50:39 router wan-failover.sh: Debug - JFFS custom scripts and configs: 1
Aug 12 13:50:39 router wan-failover.sh: Debug - HTTP Web Access: 1
Aug 12 13:50:39 router wan-failover.sh: Debug - Firewall Enabled: 1
Aug 12 13:50:39 router wan-failover.sh: Debug - IPv6 Firewall Enabled: 1
Aug 12 13:50:39 router wan-failover.sh: Debug - LEDs Disabled: 0
Aug 12 13:50:39 router wan-failover.sh: Debug - QoS Enabled: 1
Aug 12 13:50:39 router wan-failover.sh: Debug - DDNS Enabled: 1
Aug 12 13:50:39 router wan-failover.sh: Debug - DDNS Hostname: sinema.asuscomm.com
Aug 12 13:50:39 router wan-failover.sh: Debug - LAN Hostname: router
Aug 12 13:50:39 router wan-failover.sh: Debug - WAN IPv6 Service: 6in4
Aug 12 13:50:39 router wan-failover.sh: Debug - WAN IPv6 Address:
Aug 12 13:50:39 router wan-failover.sh: Debug - Default Route: default via 192.168.199.1 dev eth1
Aug 12 13:50:39 router wan-failover.sh: Debug - OpenVPN Server Instances Enabled:
Aug 12 13:50:39 router wan-failover.sh: Debug - WAN0 Enabled: 0
Aug 12 13:50:39 router wan-failover.sh: Debug - WAN0 Routing Table Default Route:
Aug 12 13:50:39 router wan-failover.sh: Debug - WAN0 Target IP Rule:
Aug 12 13:50:39 router wan-failover.sh: Debug - WAN0 IP Address: 178.249.55.33
Aug 12 13:50:39 router wan-failover.sh: Debug - WAN0 Real IP Address:
Aug 12 13:50:39 router wan-failover.sh: Debug - WAN0 Real IP Address State: 0
Aug 12 13:50:39 router wan-failover.sh: Debug - WAN0 Gateway IP: 178.249.55.254
Aug 12 13:50:39 router wan-failover.sh: Debug - WAN0 Gateway Interface: eth0
Aug 12 13:50:39 router wan-failover.sh: Debug - WAN0 Interface: eth0
Aug 12 13:50:39 router wan-failover.sh: Debug - WAN0 Automatic ISP DNS Enabled: 0
Aug 12 13:50:39 router wan-failover.sh: Debug - WAN0 Automatic ISP DNS Servers: 9.9.9.9 149.112.112.11
Aug 12 13:50:39 router wan-failover.sh: Debug - WAN0 Manual DNS Server 1: 9.9.9.9
Aug 12 13:50:39 router wan-failover.sh: Debug - WAN0 Manual DNS Server 2: 149.112.112.11
Aug 12 13:50:39 router wan-failover.sh: Debug - WAN0 State: 5
Aug 12 13:50:39 router wan-failover.sh: Debug - WAN0 Aux State: 0
Aug 12 13:50:39 router wan-failover.sh: Debug - WAN0 Sb State: 0
Aug 12 13:50:39 router wan-failover.sh: Debug - WAN0 Primary Status: 0
Aug 12 13:50:39 router wan-failover.sh: Debug - WAN0 USB Modem Status: 0
Aug 12 13:50:39 router wan-failover.sh: Debug - WAN0 UPnP Enabled: 1
Aug 12 13:50:39 router wan-failover.sh: Debug - WAN0 NAT Enabled: 1
Aug 12 13:50:39 router wan-failover.sh: Debug - WAN0 Target IP Address: 119.29.29.29
Aug 12 13:50:39 router wan-failover.sh: Debug - WAN0 Routing Table: 100
Aug 12 13:50:39 router wan-failover.sh: Debug - WAN0 IP Rule Priority: 100
Aug 12 13:50:39 router wan-failover.sh: Debug - WAN0 Mark: 0x80000000
Aug 12 13:50:39 router wan-failover.sh: Debug - WAN0 Mask: 0xf0000000
Aug 12 13:50:39 router wan-failover.sh: Debug - WAN0 From WAN Priority: 200
Aug 12 13:50:39 router wan-failover.sh: Debug - WAN0 To WAN Priority: 400
Aug 12 13:50:39 router wan-failover.sh: Debug - WAN1 Enabled: 1
Aug 12 13:50:39 router wan-failover.sh: Debug - WAN1 Routing Table Default Route: default via 192.168.199.1 dev eth1
Aug 12 13:50:39 router wan-failover.sh: Debug - WAN1 Target IP Rule:
Aug 12 13:50:39 router wan-failover.sh: Debug - WAN1 IP Address: 192.168.199.100
Aug 12 13:50:39 router wan-failover.sh: Debug - WAN1 Real IP Address: 94.25.182.252
Aug 12 13:50:39 router wan-failover.sh: Debug - WAN1 Real IP Address State: 2
Aug 12 13:50:39 router wan-failover.sh: Debug - WAN1 Gateway IP: 192.168.199.1
Aug 12 13:50:39 router wan-failover.sh: Debug - WAN1 Gateway Interface: eth1
Aug 12 13:50:39 router wan-failover.sh: Debug - WAN1 Interface: eth1
Aug 12 13:50:39 router wan-failover.sh: Debug - WAN1 Automatic ISP DNS Enabled: 0
Aug 12 13:50:39 router wan-failover.sh: Debug - WAN1 Automatic ISP DNS Servers: 9.9.9.11 149.112.112.11
Aug 12 13:50:39 router wan-failover.sh: Debug - WAN1 Manual DNS Server 1: 9.9.9.11
Aug 12 13:50:39 router wan-failover.sh: Debug - WAN1 Manual DNS Server 2: 149.112.112.11
Aug 12 13:50:39 router wan-failover.sh: Debug - WAN1 State: 2
Aug 12 13:50:39 router wan-failover.sh: Debug - WAN1 Aux State: 0
Aug 12 13:50:39 router wan-failover.sh: Debug - WAN1 Sb State: 0
Aug 12 13:50:39 router wan-failover.sh: Debug - WAN1 Primary Status: 1
Aug 12 13:50:39 router wan-failover.sh: Debug - WAN1 USB Modem Status: 0
Aug 12 13:50:39 router wan-failover.sh: Debug - WAN1 UPnP Enabled: 1
Aug 12 13:50:39 router wan-failover.sh: Debug - WAN1 NAT Enabled: 1
Aug 12 13:50:39 router wan-failover.sh: Debug - WAN1 Target IP Address: 119.28.28.28
Aug 12 13:50:39 router wan-failover.sh: Debug - WAN1 Routing Table: 200
Aug 12 13:50:39 router wan-failover.sh: Debug - WAN1 IP Rule Priority: 100
Aug 12 13:50:39 router wan-failover.sh: Debug - WAN1 Mark: 0x90000000
Aug 12 13:50:39 router wan-failover.sh: Debug - WAN1 Mask: 0xf0000000
Aug 12 13:50:39 router wan-failover.sh: Debug - WAN1 From WAN Priority: 200
Aug 12 13:50:39 router wan-failover.sh: Debug - WAN1 To WAN Priority: 400
Aug 12 13:50:39 router wan-failover.sh: Debug - Function: switchdns
Aug 12 13:50:39 router wan-failover.sh: Debug - Function: nvramcheck
Aug 12 13:50:39 router wan-failover.sh: Debug - ***NVRAM Check Passed***
Aug 12 13:50:39 router wan-failover.sh: Debug - Setting WAN0 Status for DNS Switch
Aug 12 13:50:39 router wan-failover.sh: DNS Switch - DNS is being managed by AdGuard
Aug 12 13:50:39 router wan-failover.sh: Debug - Function: checkiprules
Aug 12 13:50:39 router wan-failover.sh: Debug - Function: nvramcheck
Aug 12 13:50:39 router wan-failover.sh: Debug - ***NVRAM Check Passed***
Aug 12 13:50:39 router wan-failover.sh: Debug - Setting WAN0 Status for Check IP Rules
Aug 12 13:50:39 router wan-failover.sh: Debug - Setting WAN0 Status for Check IP Rules
Aug 12 13:50:39 router wan-failover.sh: Debug - HTTP Web Access: 1
Aug 12 13:50:39 router wan-failover.sh: Debug - wan1 UPNP Enabled: 1
Aug 12 13:50:40 router wan-failover.sh: Debug - wan1 NAT Enabled: 1
Aug 12 13:50:40 router wan-failover.sh: Debug - WAN0STATUS: DISABLED
Aug 12 13:50:40 router wan-failover.sh: Debug - WAN1STATUS: CONNECTED
Aug 12 13:50:40 router wan-failover.sh: Debug - WAN0 is Disabled
Aug 12 13:50:40 router wan-failover.sh: Debug - Function: wandisabled
Aug 12 13:50:40 router wan-failover.sh: Debug - Function: nvramcheck
Aug 12 13:50:40 router wan-failover.sh: Debug - ***NVRAM Check Passed***
Aug 12 13:50:40 router wan-failover.sh: WAN Failover Disabled - WAN Failover is currently disabled.  ***Review Logs***
Aug 12 13:50:54 router wan-failover.sh: WAN Failover Disabled - wan0 is Disabled
Aug 12 13:54:54 router wan-failover.sh: Debug - Script Mode: cron
Aug 12 13:54:54 router wan-failover.sh: Debug - Function: cronjob
Aug 12 13:55:05 router wan-failover.sh: Debug - Script Mode: cron
Aug 12 13:55:05 router wan-failover.sh: Debug - Function: cronjob
Aug 12 13:55:06 router wan-failover.sh: Debug - Script Mode: cron
Aug 12 13:55:06 router wan-failover.sh: Debug - Function: cronjob
Aug 12 13:55:06 router wan-failover.sh: Debug - Script Mode: cron
Aug 12 13:55:06 router wan-failover.sh: Debug - Script Mode: cron
Aug 12 13:55:06 router wan-failover.sh: Debug - Function: cronjob
Aug 12 13:55:06 router wan-failover.sh: Debug - Function: cronjob
Aug 12 13:55:06 router wan-failover.sh: Debug - Script Mode: cron
Aug 12 13:55:06 router wan-failover.sh: Debug - Function: cronjob
Aug 12 13:55:09 router wan-failover.sh: Debug - Script Mode: cron
Aug 12 13:55:09 router wan-failover.sh: Debug - Function: cronjob
Aug 12 13:55:16 router wan-failover.sh: WAN Failover Disabled - wan0 is enabled and connected
Aug 12 13:55:16 router wan-failover.sh: WAN Failover Disabled - wan1 is enabled and connected
Aug 12 13:55:16 router wan-failover.sh: WAN Failover Disabled - Returning to check WAN Status
Aug 12 13:55:16 router wan-failover.sh: Debug - ***WAN Disabled Loop Ended***
Aug 12 13:55:16 router wan-failover.sh: Debug - Function: debuglog
Aug 12 13:55:16 router wan-failover.sh: Debug - Function: nvramcheck
Aug 12 13:55:16 router wan-failover.sh: Debug - ***NVRAM Check Passed***
Aug 12 13:55:16 router wan-failover.sh: Debug - Model: RT-AX88U
Aug 12 13:55:16 router wan-failover.sh: Debug - Product ID: RT-AX88U
Aug 12 13:55:16 router wan-failover.sh: Debug - Build Name: RT-AX88U
Aug 12 13:55:16 router wan-failover.sh: Debug - Firmware: 386.7
Aug 12 13:55:16 router wan-failover.sh: Debug - IPRoute Version: 5.11.0
Aug 12 13:55:16 router wan-failover.sh: Debug - WAN Capability: wan usb lan
Aug 12 13:55:16 router wan-failover.sh: Debug - Dual WAN Mode: fo
Aug 12 13:55:16 router wan-failover.sh: Debug - Load Balance Ratio: 5:1
Aug 12 13:55:16 router wan-failover.sh: Debug - Dual WAN Interfaces: wan lan
Aug 12 13:55:16 router wan-failover.sh: Debug - ASUS Factory Watchdog: 0
Aug 12 13:55:16 router wan-failover.sh: Debug - JFFS custom scripts and configs: 1
Aug 12 13:55:16 router wan-failover.sh: Debug - HTTP Web Access: 1
Aug 12 13:55:16 router wan-failover.sh: Debug - Firewall Enabled: 1
Aug 12 13:55:16 router wan-failover.sh: Debug - IPv6 Firewall Enabled: 1
Aug 12 13:55:16 router wan-failover.sh: Debug - LEDs Disabled: 0
Aug 12 13:55:16 router wan-failover.sh: Debug - QoS Enabled: 1
Aug 12 13:55:16 router wan-failover.sh: Debug - DDNS Enabled: 1
Aug 12 13:55:16 router wan-failover.sh: Debug - DDNS Hostname: sinema.asuscomm.com
Aug 12 13:55:16 router wan-failover.sh: Debug - LAN Hostname: router
Aug 12 13:55:16 router wan-failover.sh: Debug - WAN IPv6 Service: 6in4
Aug 12 13:55:16 router wan-failover.sh: Debug - WAN IPv6 Address:
Aug 12 13:55:16 router wan-failover.sh: Debug - Default Route: default via 192.168.199.1 dev eth1
Aug 12 13:55:16 router wan-failover.sh: Debug - OpenVPN Server Instances Enabled:
Aug 12 13:55:16 router wan-failover.sh: Debug - WAN0 Enabled: 1
Aug 12 13:55:16 router wan-failover.sh: Debug - WAN0 Routing Table Default Route:
Aug 12 13:55:16 router wan-failover.sh: Debug - WAN0 Target IP Rule:
Aug 12 13:55:16 router wan-failover.sh: Debug - WAN0 IP Address: 178.249.55.33
Aug 12 13:55:16 router wan-failover.sh: Debug - WAN0 Real IP Address:
Aug 12 13:55:16 router wan-failover.sh: Debug - WAN0 Real IP Address State: 0
Aug 12 13:55:16 router wan-failover.sh: Debug - WAN0 Gateway IP: 178.249.55.254
Aug 12 13:55:16 router wan-failover.sh: Debug - WAN0 Gateway Interface: eth0
Aug 12 13:55:16 router wan-failover.sh: Debug - WAN0 Interface: eth0
Aug 12 13:55:16 router wan-failover.sh: Debug - WAN0 Automatic ISP DNS Enabled: 0
Aug 12 13:55:16 router wan-failover.sh: Debug - WAN0 Automatic ISP DNS Servers: 9.9.9.9 149.112.112.11
Aug 12 13:55:16 router wan-failover.sh: Debug - WAN0 Manual DNS Server 1: 9.9.9.9
Aug 12 13:55:16 router wan-failover.sh: Debug - WAN0 Manual DNS Server 2: 149.112.112.11
Aug 12 13:55:16 router wan-failover.sh: Debug - WAN0 State: 2
Aug 12 13:55:16 router wan-failover.sh: Debug - WAN0 Aux State: 0
Aug 12 13:55:16 router wan-failover.sh: Debug - WAN0 Sb State: 0
Aug 12 13:55:16 router wan-failover.sh: Debug - WAN0 Primary Status: 0
Aug 12 13:55:16 router wan-failover.sh: Debug - WAN0 USB Modem Status: 0
Aug 12 13:55:16 router wan-failover.sh: Debug - WAN0 UPnP Enabled: 1
Aug 12 13:55:16 router wan-failover.sh: Debug - WAN0 NAT Enabled: 1
Aug 12 13:55:16 router wan-failover.sh: Debug - WAN0 Target IP Address: 119.29.29.29
Aug 12 13:55:16 router wan-failover.sh: Debug - WAN0 Routing Table: 100
Aug 12 13:55:16 router wan-failover.sh: Debug - WAN0 IP Rule Priority: 100
Aug 12 13:55:16 router wan-failover.sh: Debug - WAN0 Mark: 0x80000000
Aug 12 13:55:16 router wan-failover.sh: Debug - WAN0 Mask: 0xf0000000
Aug 12 13:55:16 router wan-failover.sh: Debug - WAN0 From WAN Priority: 200
Aug 12 13:55:16 router wan-failover.sh: Debug - WAN0 To WAN Priority: 400
Aug 12 13:55:16 router wan-failover.sh: Debug - WAN1 Enabled: 1
Aug 12 13:55:16 router wan-failover.sh: Debug - WAN1 Routing Table Default Route:
Aug 12 13:55:16 router wan-failover.sh: Debug - WAN1 Target IP Rule:
Aug 12 13:55:16 router wan-failover.sh: Debug - WAN1 IP Address: 192.168.199.100
Aug 12 13:55:16 router wan-failover.sh: Debug - WAN1 Real IP Address: 94.25.182.252
Aug 12 13:55:16 router wan-failover.sh: Debug - WAN1 Real IP Address State: 2
Aug 12 13:55:16 router wan-failover.sh: Debug - WAN1 Gateway IP: 192.168.199.1
Aug 12 13:55:16 router wan-failover.sh: Debug - WAN1 Gateway Interface: eth1
Aug 12 13:55:16 router wan-failover.sh: Debug - WAN1 Interface: eth1
Aug 12 13:55:16 router wan-failover.sh: Debug - WAN1 Automatic ISP DNS Enabled: 0
Aug 12 13:55:17 router wan-failover.sh: Debug - WAN1 Automatic ISP DNS Servers: 9.9.9.11 149.112.112.11
Aug 12 13:55:17 router wan-failover.sh: Debug - WAN1 Manual DNS Server 1: 9.9.9.11
Aug 12 13:55:17 router wan-failover.sh: Debug - WAN1 Manual DNS Server 2: 149.112.112.11
Aug 12 13:55:17 router wan-failover.sh: Debug - WAN1 State: 2
Aug 12 13:55:17 router wan-failover.sh: Debug - WAN1 Aux State: 0
Aug 12 13:55:17 router wan-failover.sh: Debug - WAN1 Sb State: 0
Aug 12 13:55:17 router wan-failover.sh: Debug - WAN1 Primary Status: 1
Aug 12 13:55:17 router wan-failover.sh: Debug - WAN1 USB Modem Status: 0
Aug 12 13:55:17 router wan-failover.sh: Debug - WAN1 UPnP Enabled: 1
Aug 12 13:55:17 router wan-failover.sh: Debug - WAN1 NAT Enabled: 1
Aug 12 13:55:17 router wan-failover.sh: Debug - WAN1 Target IP Address: 119.28.28.28
Aug 12 13:55:17 router wan-failover.sh: Debug - WAN1 Routing Table: 200
Aug 12 13:55:17 router wan-failover.sh: Debug - WAN1 IP Rule Priority: 100
Aug 12 13:55:17 router wan-failover.sh: Debug - WAN1 Mark: 0x90000000
Aug 12 13:55:17 router wan-failover.sh: Debug - WAN1 Mask: 0xf0000000
Aug 12 13:55:17 router wan-failover.sh: Debug - WAN1 From WAN Priority: 200
Aug 12 13:55:17 router wan-failover.sh: Debug - WAN1 To WAN Priority: 400
Aug 12 13:55:17 router wan-failover.sh: Debug - Function: wanstatus
Aug 12 13:55:17 router wan-failover.sh: Debug - Function: nvramcheck
Aug 12 13:55:17 router wan-failover.sh: Debug - ***NVRAM Check Passed***
Aug 12 13:55:17 router wan-failover.sh: Debug - System Uptime: 1834 Seconds
Aug 12 13:55:17 router wan-failover.sh: Debug - Boot Delay Timer: 0 Seconds
Aug 12 13:55:17 router wan-failover.sh: Debug - Setting parameters for wan0
Aug 12 13:55:17 router wan-failover.sh: WAN Status - wan0 enabled
Aug 12 13:55:17 router wan-failover.sh: Debug - Checking wan0 State
Aug 12 13:55:17 router wan-failover.sh: Debug - Checking wan0 for null IP or Gateway
Aug 12 13:55:17 router wan-failover.sh: Debug - Checking wan0 for Default Route in 100
Aug 12 13:55:17 router wan-failover.sh: WAN Status - Adding default route for wan0 Routing Table via 178.249.55.254 dev eth0
Aug 12 13:55:17 router wan-failover.sh: WAN Status - Added default route for wan0 Routing Table via 178.249.55.254 dev eth0
Aug 12 13:55:17 router wan-failover.sh: Debug - Checking wan0 for IP Rule to 119.29.29.29
Aug 12 13:55:17 router wan-failover.sh: WAN Status - Adding IP Rule for 119.29.29.29 to monitor wan0
Aug 12 13:55:17 router wan-failover.sh: WAN Status - Added IP Rule for 119.29.29.29 to monitor wan0
Aug 12 13:55:17 router wan-failover.sh: Debug - Recursive Ping Check: 1
Aug 12 13:55:17 router wan-failover.sh: Debug - Checking wan0 for packet loss via 119.29.29.29 - Attempt: 1
Aug 12 13:55:22 router wan-failover.sh: Debug - wan0 Packet Loss: 0%%
Aug 12 13:55:22 router wan-failover.sh: WAN Status - wan0 has 0% packet loss
Aug 12 13:55:22 router wan-failover.sh: Debug - wan0 Status: CONNECTED
Aug 12 13:55:22 router wan-failover.sh: Debug - Function: setwanstatus
Aug 12 13:55:22 router wan-failover.sh: Debug - Setting parameters for wan1
Aug 12 13:55:22 router wan-failover.sh: WAN Status - wan1 enabled
Aug 12 13:55:22 router wan-failover.sh: Debug - Checking wan1 State
Aug 12 13:55:22 router wan-failover.sh: Debug - Checking wan1 for null IP or Gateway
Aug 12 13:55:22 router wan-failover.sh: Debug - Checking wan1 for Default Route in 200
Aug 12 13:55:22 router wan-failover.sh: WAN Status - Adding default route for wan1 Routing Table via 192.168.199.1 dev eth1
Aug 12 13:55:22 router wan-failover.sh: WAN Status - Added default route for wan1 Routing Table via 192.168.199.1 dev eth1
Aug 12 13:55:22 router wan-failover.sh: Debug - Checking wan1 for IP Rule to 119.28.28.28
Aug 12 13:55:23 router wan-failover.sh: WAN Status - Adding IP Rule for 119.28.28.28 to monitor wan1
Aug 12 13:55:23 router wan-failover.sh: WAN Status - Added IP Rule for 119.28.28.28 to monitor wan1
Aug 12 13:55:23 router wan-failover.sh: Debug - Recursive Ping Check: 1
Aug 12 13:55:23 router wan-failover.sh: Debug - Checking wan1 for packet loss via 119.28.28.28 - Attempt: 1
Aug 12 13:55:28 router wan-failover.sh: Debug - wan1 Packet Loss: 20%%
Aug 12 13:55:28 router wan-failover.sh: WAN Status - wan1 has 20% packet loss
Aug 12 13:55:28 router wan-failover.sh: Debug - wan1 Status: CONNECTED
Aug 12 13:55:28 router wan-failover.sh: Debug - Function: setwanstatus
Aug 12 13:55:28 router wan-failover.sh: Debug - Function: debuglog
Aug 12 13:55:28 router wan-failover.sh: Debug - Function: nvramcheck
Aug 12 13:55:28 router wan-failover.sh: Debug - ***NVRAM Check Passed***
Aug 12 13:55:28 router wan-failover.sh: Debug - Model: RT-AX88U
Aug 12 13:55:28 router wan-failover.sh: Debug - Product ID: RT-AX88U
Aug 12 13:55:28 router wan-failover.sh: Debug - Build Name: RT-AX88U
Aug 12 13:55:28 router wan-failover.sh: Debug - Firmware: 386.7
Aug 12 13:55:28 router wan-failover.sh: Debug - IPRoute Version: 5.11.0
Aug 12 13:55:28 router wan-failover.sh: Debug - WAN Capability: wan usb lan
Aug 12 13:55:28 router wan-failover.sh: Debug - Dual WAN Mode: fo
Aug 12 13:55:28 router wan-failover.sh: Debug - Load Balance Ratio: 5:1
Aug 12 13:55:28 router wan-failover.sh: Debug - Dual WAN Interfaces: wan lan
Aug 12 13:55:28 router wan-failover.sh: Debug - ASUS Factory Watchdog: 0
Aug 12 13:55:28 router wan-failover.sh: Debug - JFFS custom scripts and configs: 1
Aug 12 13:55:28 router wan-failover.sh: Debug - HTTP Web Access: 1
Aug 12 13:55:28 router wan-failover.sh: Debug - Firewall Enabled: 1
Aug 12 13:55:28 router wan-failover.sh: Debug - IPv6 Firewall Enabled: 1
Aug 12 13:55:28 router wan-failover.sh: Debug - LEDs Disabled: 0
Aug 12 13:55:28 router wan-failover.sh: Debug - QoS Enabled: 1
Aug 12 13:55:28 router wan-failover.sh: Debug - DDNS Enabled: 1
Aug 12 13:55:28 router wan-failover.sh: Debug - DDNS Hostname: sinema.asuscomm.com
Aug 12 13:55:28 router wan-failover.sh: Debug - LAN Hostname: router
Aug 12 13:55:28 router wan-failover.sh: Debug - WAN IPv6 Service: 6in4
Aug 12 13:55:28 router wan-failover.sh: Debug - WAN IPv6 Address:
Aug 12 13:55:28 router wan-failover.sh: Debug - Default Route: default via 192.168.199.1 dev eth1
Aug 12 13:55:28 router wan-failover.sh: Debug - OpenVPN Server Instances Enabled:
Aug 12 13:55:28 router wan-failover.sh: Debug - WAN0 Enabled: 1
Aug 12 13:55:28 router wan-failover.sh: Debug - WAN0 Routing Table Default Route: default via 178.249.55.254 dev eth0
Aug 12 13:55:28 router wan-failover.sh: Debug - WAN0 Target IP Rule:
Aug 12 13:55:28 router wan-failover.sh: Debug - WAN0 IP Address: 178.249.55.33
Aug 12 13:55:28 router wan-failover.sh: Debug - WAN0 Real IP Address:
Aug 12 13:55:28 router wan-failover.sh: Debug - WAN0 Real IP Address State: 0
Aug 12 13:55:28 router wan-failover.sh: Debug - WAN0 Gateway IP: 178.249.55.254
Aug 12 13:55:28 router wan-failover.sh: Debug - WAN0 Gateway Interface: eth0
Aug 12 13:55:28 router wan-failover.sh: Debug - WAN0 Interface: eth0
Aug 12 13:55:28 router wan-failover.sh: Debug - WAN0 Automatic ISP DNS Enabled: 0
Aug 12 13:55:28 router wan-failover.sh: Debug - WAN0 Automatic ISP DNS Servers: 9.9.9.9 149.112.112.11
Aug 12 13:55:28 router wan-failover.sh: Debug - WAN0 Manual DNS Server 1: 9.9.9.9
Aug 12 13:55:28 router wan-failover.sh: Debug - WAN0 Manual DNS Server 2: 149.112.112.11
Aug 12 13:55:28 router wan-failover.sh: Debug - WAN0 State: 2
Aug 12 13:55:28 router wan-failover.sh: Debug - WAN0 Aux State: 0
Aug 12 13:55:28 router wan-failover.sh: Debug - WAN0 Sb State: 0
Aug 12 13:55:28 router wan-failover.sh: Debug - WAN0 Primary Status: 0
Aug 12 13:55:28 router wan-failover.sh: Debug - WAN0 USB Modem Status: 0
Aug 12 13:55:28 router wan-failover.sh: Debug - WAN0 UPnP Enabled: 1
Aug 12 13:55:28 router wan-failover.sh: Debug - WAN0 NAT Enabled: 1
Aug 12 13:55:28 router wan-failover.sh: Debug - WAN0 Target IP Address: 119.29.29.29
Aug 12 13:55:28 router wan-failover.sh: Debug - WAN0 Routing Table: 100
Aug 12 13:55:28 router wan-failover.sh: Debug - WAN0 IP Rule Priority: 100
Aug 12 13:55:28 router wan-failover.sh: Debug - WAN0 Mark: 0x80000000
Aug 12 13:55:28 router wan-failover.sh: Debug - WAN0 Mask: 0xf0000000
Aug 12 13:55:28 router wan-failover.sh: Debug - WAN0 From WAN Priority: 200
Aug 12 13:55:28 router wan-failover.sh: Debug - WAN0 To WAN Priority: 400
Aug 12 13:55:28 router wan-failover.sh: Debug - WAN1 Enabled: 1
Aug 12 13:55:28 router wan-failover.sh: Debug - WAN1 Routing Table Default Route: default via 192.168.199.1 dev eth1
Aug 12 13:55:28 router wan-failover.sh: Debug - WAN1 Target IP Rule:
Aug 12 13:55:28 router wan-failover.sh: Debug - WAN1 IP Address: 192.168.199.100
Aug 12 13:55:28 router wan-failover.sh: Debug - WAN1 Real IP Address: 94.25.182.252
Aug 12 13:55:28 router wan-failover.sh: Debug - WAN1 Real IP Address State: 2
Aug 12 13:55:28 router wan-failover.sh: Debug - WAN1 Gateway IP: 192.168.199.1
Aug 12 13:55:28 router wan-failover.sh: Debug - WAN1 Gateway Interface: eth1
Aug 12 13:55:28 router wan-failover.sh: Debug - WAN1 Interface: eth1
Aug 12 13:55:28 router wan-failover.sh: Debug - WAN1 Automatic ISP DNS Enabled: 0
Aug 12 13:55:28 router wan-failover.sh: Debug - WAN1 Automatic ISP DNS Servers: 9.9.9.11 149.112.112.11
Aug 12 13:55:28 router wan-failover.sh: Debug - WAN1 Manual DNS Server 1: 9.9.9.11
Aug 12 13:55:28 router wan-failover.sh: Debug - WAN1 Manual DNS Server 2: 149.112.112.11
Aug 12 13:55:28 router wan-failover.sh: Debug - WAN1 State: 2
Aug 12 13:55:28 router wan-failover.sh: Debug - WAN1 Aux State: 0
Aug 12 13:55:28 router wan-failover.sh: Debug - WAN1 Sb State: 0
Aug 12 13:55:28 router wan-failover.sh: Debug - WAN1 Primary Status: 1
Aug 12 13:55:28 router wan-failover.sh: Debug - WAN1 USB Modem Status: 0
Aug 12 13:55:28 router wan-failover.sh: Debug - WAN1 UPnP Enabled: 1
Aug 12 13:55:28 router wan-failover.sh: Debug - WAN1 NAT Enabled: 1
Aug 12 13:55:28 router wan-failover.sh: Debug - WAN1 Target IP Address: 119.28.28.28
Aug 12 13:55:28 router wan-failover.sh: Debug - WAN1 Routing Table: 200
Aug 12 13:55:28 router wan-failover.sh: Debug - WAN1 IP Rule Priority: 100
Aug 12 13:55:28 router wan-failover.sh: Debug - WAN1 Mark: 0x90000000
Aug 12 13:55:28 router wan-failover.sh: Debug - WAN1 Mask: 0xf0000000
Aug 12 13:55:28 router wan-failover.sh: Debug - WAN1 From WAN Priority: 200
Aug 12 13:55:28 router wan-failover.sh: Debug - WAN1 To WAN Priority: 400
Aug 12 13:55:28 router wan-failover.sh: Debug - Function: switchdns
Aug 12 13:55:28 router wan-failover.sh: Debug - Function: nvramcheck
Aug 12 13:55:28 router wan-failover.sh: Debug - ***NVRAM Check Passed***
Aug 12 13:55:28 router wan-failover.sh: Debug - Setting WAN0 Status for DNS Switch
Aug 12 13:55:28 router wan-failover.sh: DNS Switch - DNS is being managed by AdGuard
Aug 12 13:55:28 router wan-failover.sh: Debug - Function: checkiprules
Aug 12 13:55:28 router wan-failover.sh: Debug - Function: nvramcheck
Aug 12 13:55:28 router wan-failover.sh: Debug - ***NVRAM Check Passed***
Aug 12 13:55:28 router wan-failover.sh: Debug - Setting WAN0 Status for Check IP Rules
Aug 12 13:55:28 router wan-failover.sh: Debug - HTTP Web Access: 1
Aug 12 13:55:28 router wan-failover.sh: Check IP Rules - wan0 creating VSERVER Rule for 178.249.55.33
Aug 12 13:55:28 router wan-failover.sh: Check IP Rules - wan0 created VSERVER Rule for 178.249.55.33
Aug 12 13:55:28 router wan-failover.sh: Debug - wan0 UPNP Enabled: 1
Aug 12 13:55:28 router wan-failover.sh: Check IP Rules - wan0 creating UPNP Rule for eth0
Aug 12 13:55:28 router wan-failover.sh: Check IP Rules - wan0 created UPNP Rule for eth0
Aug 12 13:55:28 router wan-failover.sh: Debug - wan0 NAT Enabled: 1
Aug 12 13:55:28 router wan-failover.sh: Check IP Rules - Adding iptables MASQUERADE rule for excluding 178.249.55.33 via eth0
Aug 12 13:55:28 router wan-failover.sh: Check IP Rules - Added iptables MASQUERADE rule for excluding 178.249.55.33 via eth0
Aug 12 13:55:28 router wan-failover.sh: Debug - Setting WAN0 Status for Check IP Rules
Aug 12 13:55:28 router wan-failover.sh: Debug - HTTP Web Access: 1
Aug 12 13:55:28 router wan-failover.sh: Debug - wan1 UPNP Enabled: 1
Aug 12 13:55:28 router wan-failover.sh: Debug - wan1 NAT Enabled: 1
Aug 12 13:55:28 router wan-failover.sh: Debug - WAN0STATUS: CONNECTED
Aug 12 13:55:28 router wan-failover.sh: Debug - WAN1STATUS: CONNECTED
Aug 12 13:55:28 router wan-failover.sh: Debug - WAN0 is not Primary WAN
Aug 12 13:55:28 router wan-failover.sh: Debug - Function: failover
Aug 12 13:55:28 router wan-failover.sh: Debug - Function: switchwan
Aug 12 13:55:28 router wan-failover.sh: Debug - Function: nvramcheck
Aug 12 13:55:28 router wan-failover.sh: Debug - ***NVRAM Check Passed***
Aug 12 13:55:28 router wan-failover.sh: Debug - Active WAN: wan0
Aug 12 13:55:28 router wan-failover.sh: Debug - Inactive WAN: wan1
Aug 12 13:55:28 router wan-failover.sh: WAN Switch - Switching wan0 to Primary WAN
Aug 12 13:55:28 router wan-failover.sh: WAN Switch - WAN Interface: eth0
Aug 12 13:55:28 router wan-failover.sh: WAN Switch - Deleting default route via 192.168.199.1 dev eth1
Aug 12 13:55:28 router wan-failover.sh: WAN Switch - Deleted default route via 192.168.199.1 dev eth1
Aug 12 13:55:28 router wan-failover.sh: WAN Switch - Adding default route via 178.249.55.254 dev eth0
Aug 12 13:55:28 router wan-failover.sh: WAN Switch - Added default route via 178.249.55.254 dev eth0
Aug 12 13:55:28 router wan-failover.sh: Debug - QoS is Enabled
Aug 12 13:55:28 router wan-failover.sh: WAN Switch - Applying Manual QoS Bandwidth Settings
Aug 12 13:55:28 router wan-failover.sh: WAN Switch - Applied Manual QoS Bandwidth Settings
Aug 12 13:55:28 router wan-failover.sh: Debug - Outbound Bandwidth: 102400
Aug 12 13:55:28 router wan-failover.sh: Debug - Inbound Bandwidth: 102400
Aug 12 13:55:28 router wan-failover.sh: Debug - QoS Overhead: 0
Aug 12 13:55:28 router wan-failover.sh: Debug - QoS ATM: 0
Aug 12 13:55:28 router wan-failover.sh: WAN Switch - QoS Settings: Upload Bandwidth: 100Mbps
Aug 12 13:55:28 router wan-failover.sh: WAN Switch - QoS Settings: Download Bandwidth: 100Mbps
Aug 12 13:55:30 router wan-failover.sh: WAN Switch - Switched wan0 to Primary WAN
Aug 12 13:55:30 router wan-failover.sh: Debug - Function: switchdns
Aug 12 13:55:30 router wan-failover.sh: Debug - Function: nvramcheck
Aug 12 13:55:30 router wan-failover.sh: Debug - ***NVRAM Check Passed***
Aug 12 13:55:30 router wan-failover.sh: Debug - Setting WAN0 Status for DNS Switch
Aug 12 13:55:30 router wan-failover.sh: DNS Switch - DNS is being managed by AdGuard
Aug 12 13:55:30 router wan-failover.sh: Debug - Function: restartservices
Aug 12 13:55:30 router wan-failover.sh: Debug - Function: nvramcheck
Aug 12 13:55:30 router wan-failover.sh: Debug - ***NVRAM Check Passed***
Aug 12 13:55:30 router wan-failover.sh: Debug - Checking which services need to be restarted
Aug 12 13:55:30 router wan-failover.sh: Debug - Dnsmasq is running
Aug 12 13:55:30 router wan-failover.sh: Debug - Firewall is enabled
Aug 12 13:55:30 router wan-failover.sh: Debug - LEDs are enabled
Aug 12 13:55:30 router wan-failover.sh: Debug - QoS is enabled
Aug 12 13:55:30 router wan-failover.sh: Debug - IPv6 6in4 is enabled
Aug 12 13:55:30 router wan-failover.sh: Service Restart - Restarting dnsmasq service
Aug 12 13:55:30 router wan-failover.sh: Service Restart - Restarted dnsmasq service
Aug 12 13:55:30 router wan-failover.sh: Service Restart - Restarting firewall service
Aug 12 13:55:31 router wan-failover.sh: Service Restart - Restarted firewall service
Aug 12 13:55:31 router wan-failover.sh: Service Restart - Restarting leds service
Aug 12 13:55:32 router wan-failover.sh: Service Restart - Restarted leds service
Aug 12 13:55:32 router wan-failover.sh: Service Restart - Restarting qos service
Aug 12 13:55:33 router wan-failover.sh: Service Restart - Restarted qos service
Aug 12 13:55:33 router wan-failover.sh: Service Restart - Restarting wan6 service
Aug 12 13:55:39 router wan-failover.sh: Service Restart - Restarted wan6 service
Aug 12 13:55:39 router wan-failover.sh: Debug - Checking if OpenVPN Server instances exist and are enabled
Aug 12 13:55:39 router wan-failover.sh: Debug - Checking if YazFi is installed and scheduled in Cron Jobs
Aug 12 13:55:39 router wan-failover.sh: Debug - Checking if VPNMON-R2 is installed, configured, and running
Aug 12 13:55:39 router wan-failover.sh: Debug - Function: checkiprules
Aug 12 13:55:39 router wan-failover.sh: Debug - Function: nvramcheck
Aug 12 13:55:39 router wan-failover.sh: Debug - ***NVRAM Check Passed***
Aug 12 13:55:39 router wan-failover.sh: Debug - Setting WAN0 Status for Check IP Rules
Aug 12 13:55:39 router wan-failover.sh: Debug - HTTP Web Access: 1
Aug 12 13:55:39 router wan-failover.sh: Debug - wan0 UPNP Enabled: 1
Aug 12 13:55:39 router wan-failover.sh: Debug - wan0 NAT Enabled: 1
Aug 12 13:55:39 router wan-failover.sh: Debug - Setting WAN0 Status for Check IP Rules
Aug 12 13:55:39 router wan-failover.sh: Debug - HTTP Web Access: 1
Aug 12 13:55:39 router wan-failover.sh: Check IP Rules - wan1 creating VSERVER Rule for 192.168.199.100
Aug 12 13:55:39 router wan-failover.sh: Check IP Rules - wan1 created VSERVER Rule for 192.168.199.100
Aug 12 13:55:39 router wan-failover.sh: Debug - wan1 UPNP Enabled: 1
Aug 12 13:55:39 router wan-failover.sh: Check IP Rules - wan1 creating UPNP Rule for eth1
Aug 12 13:55:39 router wan-failover.sh: Check IP Rules - wan1 created UPNP Rule for eth1
Aug 12 13:55:39 router wan-failover.sh: Debug - wan1 NAT Enabled: 1
Aug 12 13:55:39 router wan-failover.sh: Check IP Rules - Adding iptables MASQUERADE rule for excluding 192.168.199.100 via eth1
Aug 12 13:55:39 router wan-failover.sh: Check IP Rules - Added iptables MASQUERADE rule for excluding 192.168.199.100 via eth1
Aug 12 13:55:39 router wan-failover.sh: Debug - Function: sendemail
Aug 12 13:55:39 router wan-failover.sh: Debug - Function: nvramcheck
Aug 12 13:55:39 router wan-failover.sh: Debug - ***NVRAM Check Passed***
Aug 12 13:55:39 router wan-failover.sh: Debug - Checking if /tmp/wan-failover-mail exists
Aug 12 13:55:39 router wan-failover.sh: Debug - Selecting Subject Name
Aug 12 13:55:39 router wan-failover.sh: Debug - Selecting From Name
Aug 12 13:55:39 router wan-failover.sh: Debug - Selecting Email Header
Aug 12 13:55:39 router wan-failover.sh: Debug - Selecting Hostname
Aug 12 13:55:39 router wan-failover.sh: Debug - DDNS Hostname: sinema.asuscomm.com
Aug 12 13:55:39 router wan-failover.sh: Debug - Selecting Parameters based on Dual WAN Mode: fo
Aug 12 13:55:39 router wan-failover.sh: Debug - WAN0 Status: CONNECTED
Aug 12 13:55:39 router wan-failover.sh: Debug - WAN1 Status: CONNECTED
Aug 12 13:55:39 router wan-failover.sh: Debug - Connecting to ipinfo.io for Active ISP
Aug 12 13:55:39 router wan-failover.sh: Debug - WAN IP Address: 178.249.55.33
Aug 12 13:55:39 router wan-failover.sh: Debug - IPv6 IP Address:
Aug 12 13:55:39 router wan-failover.sh: Debug - WAN Gateway IP Address: 178.249.55.254
Aug 12 13:55:39 router wan-failover.sh: Debug - WAN Interface: eth0
Aug 12 13:55:39 router wan-failover.sh: Debug - Checking if AdGuardHome is running
Aug 12 13:55:39 router wan-failover.sh: Debug - QoS Enabled: 1
Aug 12 13:55:39 router wan-failover.sh: Debug - QoS Outbound Bandwidth: 102400
Aug 12 13:55:39 router wan-failover.sh: Debug - QoS Inbound Bandwidth: 102400
Aug 12 13:55:39 router wan-failover.sh: Debug - QoS WAN Packet Overhead: 0
Aug 12 13:55:39 router wan-failover.sh: Debug - Selecting AMTM or AIProtection for Email Notification
Aug 12 13:55:39 router wan-failover.sh: Debug - AMTM Email Configuration Detected
Aug 12 13:55:41 router wan-failover.sh: Email Notification - Email Notification via amtm Sent
Aug 12 13:55:41 router wan-failover.sh: Debug - WAN1 is Connected
Aug 12 13:55:41 router wan-failover.sh: Debug - Function: wan0failovermonitor
Aug 12 13:55:41 router wan-failover.sh: Debug - Function: nvramcheck
Aug 12 13:55:41 router wan-failover.sh: Debug - ***NVRAM Check Passed***
Aug 12 13:55:41 router wan-failover.sh: WAN0 Failover Monitor - Monitoring wan0 via 119.29.29.29 for Failure
Aug 12 13:55:41 router wan-failover.sh: WAN0 Failover Monitor - Monitoring wan1 via 119.28.28.28 for Failure