API tools faq
paste
Advertisement
Guest User

ebin, u-boot 17.10.1, kernelbranch 17.10, ondemand governor

a guest
Sep 25th, 2017
468
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 31.89 KB | None | 0 0
raw download clone embed print report
  1. NOTICE: Booting Trusted Firmware
  2. NOTICE: BL1: v1.3(release):devel-17.08.1:627667b
  3. NOTICE: BL1: Built : 15:50:29, Sep 25 2NOTICE: BL2: v1.3(release):devel-17.08.1:627667b
  4. NOTICE: BL2: Built : 15:50:29, Sep 25 2017
  5. NNOTICE: BL31: v1.3(release):devel-17.08.1:627667b
  6. NOTICE: BL31:
  7.  
  8. U-Boot 2017.03-armada-17.10.1-g440395a (Sep 25 2017 - 15:43:51 +0200)
  9.  
  10. Model: Marvell Armada 3720 Community Board ESPRESSOBin
  11. CPU @ 1000 [MHz]
  12. L2 @ 800 [MHz]
  13. TClock @ 200 [MHz]
  14. DDR @ 800 [MHz]
  15. DRAM: 1 GiB
  16. U-Boot DT blob at : 000000003f7182d8
  17. Comphy-0: USB3 5 Gbps
  18. Comphy-1: PEX0 2.5 Gbps
  19. Comphy-2: SATA0 6 Gbps
  20. SATA link 0 timeout.
  21. AHCI 0001.0300 32 slots 1 ports 6 Gbps 0x1 impl SATA mode
  22. flags: ncq led only pmp fbss pio slum part sxs
  23. PCIE-0: Link down
  24. MMC: sdhci@d0000: 0
  25. SF: Detected w25q32dw with page size 256 Bytes, erase size 4 KiB, total 4 MiB
  26. Net: eth0: neta@30000 [PRIME]
  27. Hit any key to stop autoboot: 0
  28. switch to partitions #0, OK
  29. mmc0 is current device
  30. 14312448 bytes read in 621 ms (22 MiB/s)
  31. 5124334 bytes read in 230 ms (21.2 MiB/s)
  32. 11474 bytes read in 26 ms (430.7 KiB/s)
  33. ## Loading init Ramdisk from Legacy Image at 01100000 ...
  34. Image Name: uInitrd
  35. Image Type: AArch64 Linux RAMDisk Image (gzip compressed)
  36. Data Size: 5124270 Bytes = 4.9 MiB
  37. Load Address: 00000000
  38. Entry Point: 00000000
  39. Verifying Checksum ... OK
  40. ## Flattened Device Tree blob at 04f00000
  41. Booting using the fdt blob at 0x4f00000
  42. Loading Ramdisk to 3f233000, end 3f7160ae ... OK
  43. Using Device Tree in place at 0000000004f00000, end 0000000004f05cd1
  44.  
  45. Starting kernel ...
  46.  
  47. [ 0.000000] Booting Linux on physical CPU 0x0
  48. [ 0.000000] Initializing cgroup subsys cpuset
  49. [ 0.000000] Initializing cgroup subsys cpu
  50. [ 0.000000] Initializing cgroup subsys cpuacct
  51. [ 0.000000] Linux version 4.4.88-mvebu64 (root@Ubuntu) (gcc version 6.4.1 20170707 (Linaro GCC 6.4-2017.08) ) #1 SMP PREEMPT Mon Sep 25 10:05:52 CEST 2017
  52. [ 0.000000] Boot CPU: AArch64 Processor [410fd034]
  53. [ 0.000000] earlycon: Early serial console at MMIO 0xd0012000 (options '')
  54. [ 0.000000] bootconsole [uart0] enabled
  55. [ 0.000000] efi: Getting EFI parameters from FDT:
  56. [ 0.000000] efi: UEFI not found.
  57. [ 0.000000] cma: Reserved 16 MiB at 0x000000003e000000
  58. [ 0.000000] psci: probing for conduit method from DT.
  59. [ 0.000000] psci: PSCIv1.0 detected in firmware.
  60. [ 0.000000] psci: Using standard PSCI v0.2 function IDs
  61. [ 0.000000] psci: MIGRATE_INFO_TYPE not supported.
  62. [ 0.000000] PERCPU: Embedded 16 pages/cpu @ffffffc03ffc5000 s25240 r8192 d32104 u65536
  63. [ 0.000000] Detected VIPT I-cache on CPU0
  64. [ 0.000000] CPU features: enabling workaround for ARM erratum 845719
  65. [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 257536
  66. [ 0.000000] Kernel command line: console=ttyMV0,115200 earlycon=ar3700_uart,0xd0012000 root=/dev/mmcblk0p1 rw rootwait
  67. [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
  68. [ 0.000000] Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)
  69. [ 0.000000] Inode-cache hash table entries: 65536 (order: 7, 524288 bytes)
  70. [ 0.000000] software IO TLB [mem 0x39600000-0x3d600000] (64MB) mapped at [ffffffc039600000-ffffffc03d5fffff]
  71. [ 0.000000] Memory: 926688K/1046528K available (9613K kernel code, 573K rwdata, 3312K rodata, 360K init, 289K bss, 103456K reserved, 16384K cma-reserved)
  72. [ 0.000000] Virtual kernel memory layout:
  73. [ 0.000000] vmalloc : 0xffffff8000000000 - 0xffffffbdbfff0000 ( 246 GB)
  74. [ 0.000000] vmemmap : 0xffffffbdc0000000 - 0xffffffbfc0000000 ( 8 GB maximum)
  75. [ 0.000000] 0xffffffbdc0000000 - 0xffffffbdc1000000 ( 16 MB actual)
  76. [ 0.000000] fixed : 0xffffffbffa7fd000 - 0xffffffbffac00000 ( 4108 KB)
  77. [ 0.000000] PCI I/O : 0xffffffbffae00000 - 0xffffffbffbe00000 ( 16 MB)
  78. [ 0.000000] modules : 0xffffffbffc000000 - 0xffffffc000000000 ( 64 MB)
  79. [ 0.000000] memory : 0xffffffc000000000 - 0xffffffc040000000 ( 1024 MB)
  80. [ 0.000000] .init : 0xffffffc000d22000 - 0xffffffc000d7c000 ( 360 KB)
  81. [ 0.000000] .text : 0xffffffc000080000 - 0xffffffc000d21474 ( 12934 KB)
  82. [ 0.000000] .data : 0xffffffc000d97000 - 0xffffffc000e26400 ( 573 KB)
  83. [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
  84. [ 0.000000] Preemptible hierarchical RCU implementation.
  85. [ 0.000000] Build-time adjustment of leaf fanout to 64.
  86. [ 0.000000] RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=2.
  87. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=2
  88. [ 0.000000] NR_IRQS:64 nr_irqs:64 0
  89. [ 0.000000] GIC: Using split EOI/Deactivate mode
  90. [ 0.000000] CPU0: found redistributor 0 region 0:0x00000000d1d40000
  91. [ 0.000000] Architected cp15 timer(s) running at 12.50MHz (phys).
  92. [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x2e2049cda, max_idle_ns: 440795202628 ns
  93. [ 0.000003] sched_clock: 56 bits at 12MHz, resolution 80ns, wraps every 4398046511080ns
  94. [ 0.008408] Console: colour dummy device 80x25
  95. [ 0.012917] Calibrating delay loop (skipped), value calculated using timer frequency.. 25.00 BogoMIPS (lpj=50000)
  96. [ 0.023469] pid_max: default: 32768 minimum: 301
  97. [ 0.028269] Security Framework initialized
  98. [ 0.032459] Mount-cache hash table entries: 2048 (order: 2, 16384 bytes)
  99. [ 0.039334] Mountpoint-cache hash table entries: 2048 (order: 2, 16384 bytes)
  100. [ 0.047197] Initializing cgroup subsys memory
  101. [ 0.051627] Initializing cgroup subsys devices
  102. [ 0.056178] Initializing cgroup subsys freezer
  103. [ 0.060746] Initializing cgroup subsys net_cls
  104. [ 0.065314] Initializing cgroup subsys net_prio
  105. [ 0.069973] Initializing cgroup subsys hugetlb
  106. [ 0.074541] Initializing cgroup subsys pids
  107. [ 0.079096] EFI services will not be available.
  108. [ 0.083701] ASID allocator initialised with 65536 entries
  109. [ 0.125384] Detected VIPT I-cache on CPU1
  110. [ 0.125410] CPU1: found redistributor 1 region 0:0x00000000d1d60000
  111. [ 0.125436] CPU1: Booted secondary processor [410fd034]
  112. [ 0.125491] Brought up 2 CPUs
  113. [ 0.144410] SMP: Total of 2 processors activated.
  114. [ 0.149254] CPU features: detected feature: GIC system register CPU interface
  115. [ 0.156602] CPU: All CPU(s) started at EL2
  116. [ 0.160823] alternatives: patching kernel code
  117. [ 0.165853] devtmpfs: initialized
  118. [ 0.171873] DMI not present or invalid.
  119. [ 0.175961] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
  120. [ 0.185946] futex hash table entries: 512 (order: 4, 65536 bytes)
  121. [ 0.192930] xor: measuring software checksum speed
  122. [ 0.237857] 8regs : 1919.000 MB/sec
  123. [ 0.282118] 8regs_prefetch: 1711.000 MB/sec
  124. [ 0.326734] 32regs : 2359.000 MB/sec
  125. [ 0.370991] 32regs_prefetch: 1984.000 MB/sec
  126. [ 0.375662] xor: using function: 32regs (2359.000 MB/sec)
  127. [ 0.381231] pinctrl core: initialized pinctrl subsystem
  128. [ 0.387766] NET: Registered protocol family 16
  129. [ 0.404345] cpuidle: using governor ladder
  130. [ 0.420509] cpuidle: using governor menu
  131. [ 0.424715] vdso: 2 pages (1 code @ ffffffc000d9d000, 1 data @ ffffffc000d9c000)
  132. [ 0.432289] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
  133. [ 0.441031] DMA: preallocated 2048 KiB pool for atomic allocations
  134. [ 0.447451] Serial: AMBA PL011 UART driver
  135. [ 0.452968] d0012000.serial: ttyMV0 at MMIO 0xd0012000 (irq = 7, base_baud = 0) is a mvebu-uart
  136. [ 0.461884] console [ttyMV0] enabled
  137. [ 0.461884] console [ttyMV0] enabled
  138. [ 0.469229] bootconsole [uart0] disabled
  139. [ 0.469229] bootconsole [uart0] disabled
  140. [ 0.572970] raid6: int64x1 gen() 396 MB/s
  141. [ 0.644860] raid6: int64x1 xor() 398 MB/s
  142. [ 0.716925] raid6: int64x2 gen() 595 MB/s
  143. [ 0.788975] raid6: int64x2 xor() 514 MB/s
  144. [ 0.861075] raid6: int64x4 gen() 864 MB/s
  145. [ 0.933106] raid6: int64x4 xor() 633 MB/s
  146. [ 1.005141] raid6: int64x8 gen() 998 MB/s
  147. [ 1.077192] raid6: int64x8 xor() 626 MB/s
  148. [ 1.149222] raid6: neonx1 gen() 629 MB/s
  149. [ 1.221295] raid6: neonx1 xor() 651 MB/s
  150. [ 1.293370] raid6: neonx2 gen() 1035 MB/s
  151. [ 1.365405] raid6: neonx2 xor() 890 MB/s
  152. [ 1.437439] raid6: neonx4 gen() 1332 MB/s
  153. [ 1.509513] raid6: neonx4 xor() 1015 MB/s
  154. [ 1.581559] raid6: neonx8 gen() 1414 MB/s
  155. [ 1.653603] raid6: neonx8 xor() 1046 MB/s
  156. [ 1.657842] raid6: using algorithm neonx8 gen() 1414 MB/s
  157. [ 1.663144] raid6: .... xor() 1046 MB/s, rmw enabled
  158. [ 1.668716] raid6: using intx1 recovery algorithm
  159. [ 1.673989] ACPI: Interpreter disabled.
  160. [ 1.678279] gpio-regulator soc:internal-regs:regulator@0: Could not obtain regulator setting GPIOs: -517
  161. [ 1.687956] armada3700-avs d0011500.avs: error getting max cpu frequency, try again later
  162. [ 1.696377] armada3700-avs d0011500.avs: armada_3700_avs_probe: failed initialization
  163. [ 1.704797] vgaarb: loaded
  164. [ 1.707602] SCSI subsystem initialized
  165. [ 1.711537] usbcore: registered new interface driver usbfs
  166. [ 1.717239] usbcore: registered new interface driver hub
  167. [ 1.722372] usbcore: registered new device driver usb
  168. [ 1.728321] pps_core: LinuxPPS API ver. 1 registered
  169. [ 1.733052] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
  170. [ 1.742787] PTP clock support registered
  171. [ 1.746996] dmi: Firmware registration failed.
  172. [ 1.751406] armada37xx-clk-pm d0014018.cpu-pm-clk: error getting max cpu frequency, try again later
  173. [ 1.761642] NetLabel: Initializing
  174. [ 1.764802] NetLabel: domain hash size = 128
  175. [ 1.769321] NetLabel: protocols = UNLABELED CIPSOv4
  176. [ 1.774482] NetLabel: unlabeled traffic allowed by default
  177. [ 1.780670] clocksource: Switched to clocksource arch_sys_counter
  178. [ 1.787349] pnp: PnP ACPI: disabled
  179. [ 1.798386] NET: Registered protocol family 2
  180. [ 1.803482] TCP established hash table entries: 8192 (order: 4, 65536 bytes)
  181. [ 1.810806] TCP bind hash table entries: 8192 (order: 5, 131072 bytes)
  182. [ 1.817536] TCP: Hash tables configured (established 8192 bind 8192)
  183. [ 1.824454] UDP hash table entries: 512 (order: 2, 16384 bytes)
  184. [ 1.830626] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
  185. [ 1.837015] NET: Registered protocol family 1
  186. [ 1.841894] RPC: Registered named UNIX socket transport module.
  187. [ 1.848040] RPC: Registered udp transport module.
  188. [ 1.852559] RPC: Registered tcp transport module.
  189. [ 1.857418] RPC: Registered tcp NFSv4.1 backchannel transport module.
  190. [ 1.864567] Trying to unpack rootfs image as initramfs...
  191. [ 2.120112] Freeing initrd memory: 5004K
  192. [ 2.124977] kvm [1]: GICv3: no GICV resource entry
  193. [ 2.129964] kvm [1]: disabling GICv2 emulation
  194. [ 2.134480] kvm [1]: interrupt-controller@ffffffc0000aba64 IRQ13
  195. [ 2.140590] kvm [1]: timer IRQ3
  196. [ 2.144041] kvm [1]: Hyp mode initialized successfully
  197. [ 2.151145] audit: initializing netlink subsys (disabled)
  198. [ 2.156823] audit: type=2000 audit(2.080:1): initialized
  199. [ 2.162359] HugeTLB registered 2 MB page size, pre-allocated 0 pages
  200. [ 2.177100] VFS: Disk quotas dquot_6.6.0
  201. [ 2.181015] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
  202. [ 2.191123] NFS: Registering the id_resolver key type
  203. [ 2.196162] Key type id_resolver registered
  204. [ 2.200425] Key type id_legacy registered
  205. [ 2.204621] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
  206. [ 2.211365] jffs2: version 2.2. (NAND) ?? 2001-2006 Red Hat, Inc.
  207. [ 2.218374] fuse init (API version 7.23)
  208. [ 2.222789] SGI XFS with ACLs, security attributes, realtime, no debug enabled
  209. [ 2.234316] async_tx: api initialized (async)
  210. [ 2.239168] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
  211. [ 2.246594] io scheduler noop registered
  212. [ 2.250932] io scheduler deadline registered
  213. [ 2.255043] io scheduler cfq registered (default)
  214. [ 2.263538] libphy: Fixed MDIO Bus: probed
  215. [ 2.267759] tun: Universal TUN/TAP device driver, 1.6
  216. [ 2.272759] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
  217. [ 2.279560] libphy: mdio_driver_register: mv88e6xxx
  218. [ 2.284817] libphy: orion_mdio_bus: probed
  219. [ 2.288918] mdio_bus d0032004.mdio-mi:01: mdio_device_register
  220. [ 2.299471] sky2: driver version 1.30
  221. [ 2.303132] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
  222. [ 2.309132] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
  223. [ 2.315495] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.3.0-k
  224. [ 2.322262] igb: Copyright (c) 2007-2014 Intel Corporation.
  225. [ 2.328183] igbvf: Intel(R) Gigabit Virtual Function Network Driver - version 2.0.2-k
  226. [ 2.336294] igbvf: Copyright (c) 2009 - 2012 Intel Corporation.
  227. [ 2.342281] ixgbe: Intel(R) 10 Gigabit PCI Express Network Driver - version 4.2.1-k
  228. [ 2.350504] ixgbe: Copyright (c) 1999-2015 Intel Corporation.
  229. [ 2.356422] ixgbevf: Intel(R) 10 Gigabit PCI Express Virtual Function Network Driver - version 2.12.1-k
  230. [ 2.365800] ixgbevf: Copyright (c) 2009 - 2012 Intel Corporation.
  231. [ 2.372502] ixgb: Intel(R) PRO/10GbE Network Driver - version 1.0.135-k2-NAPI
  232. [ 2.379559] ixgb: Copyright (c) 1999-2008 Intel Corporation.
  233. [ 2.386826] advk-pcie d0070000.pcie: Failed to obtain clock from DT
  234. [ 2.397705] mv_xor d0060900.xor: Marvell shared XOR driver
  235. [ 2.425273] mv_xor d0060900.xor: Marvell XOR (Descriptor Mode): ( xor cpy intr pq )
  236. [ 2.453244] mv_xor d0060900.xor: Marvell XOR (Descriptor Mode): ( xor cpy intr pq )
  237. [ 2.465729] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
  238. [ 2.474549] Unable to detect cache hierarchy from DT for CPU 0
  239. [ 2.481594] brd: module loaded
  240. [ 2.493764] loop: module loaded
  241. [ 2.497517] SCSI Media Changer driver v0.25
  242. [ 2.503706] VFIO - User Level meta-driver version: 0.3
  243. [ 2.515507] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  244. [ 2.522058] ehci-pci: EHCI PCI platform driver
  245. [ 2.526970] ehci-platform: EHCI generic platform driver
  246. [ 2.532190] ehci-orion: EHCI orion driver
  247. [ 2.546639] orion-ehci d005e000.usb: EHCI Host Controller
  248. [ 2.552075] orion-ehci d005e000.usb: new USB bus registered, assigned bus number 1
  249. [ 2.560056] orion-ehci d005e000.usb: irq 10, io mem 0xd005e000
  250. [ 2.576683] orion-ehci d005e000.usb: USB 2.0 started, EHCI 1.00
  251. [ 2.583326] hub 1-0:1.0: USB hub found
  252. [ 2.586890] hub 1-0:1.0: 1 port detected
  253. [ 2.591244] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
  254. [ 2.597328] ohci-pci: OHCI PCI platform driver
  255. [ 2.602350] ohci-platform: OHCI generic platform driver
  256. [ 2.608381] usbcore: registered new interface driver usb-storage
  257. [ 2.614600] usbcore: registered new interface driver ums-alauda
  258. [ 2.620339] usbcore: registered new interface driver ums-cypress
  259. [ 2.626824] usbcore: registered new interface driver ums-datafab
  260. [ 2.633032] usbcore: registered new interface driver ums_eneub6250
  261. [ 2.639240] usbcore: registered new interface driver ums-freecom
  262. [ 2.645629] usbcore: registered new interface driver ums-isd200
  263. [ 2.651840] usbcore: registered new interface driver ums-jumpshot
  264. [ 2.658054] usbcore: registered new interface driver ums-karma
  265. [ 2.663813] usbcore: registered new interface driver ums-onetouch
  266. [ 2.670392] usbcore: registered new interface driver ums-realtek
  267. [ 2.676708] usbcore: registered new interface driver ums-sddr09
  268. [ 2.682811] usbcore: registered new interface driver ums-sddr55
  269. [ 2.689989] usbcore: registered new interface driver ums-usbat
  270. [ 2.697277] mousedev: PS/2 mouse device common for all mice
  271. [ 2.703691] i2c /dev entries driver
  272. [ 2.707891] md: linear personality registered for level -1
  273. [ 2.713602] md: raid0 personality registered for level 0
  274. [ 2.719117] md: raid1 personality registered for level 1
  275. [ 2.724280] md: raid10 personality registered for level 10
  276. [ 2.730319] md: raid6 personality registered for level 6
  277. [ 2.735541] md: raid5 personality registered for level 5
  278. [ 2.741323] md: raid4 personality registered for level 4
  279. [ 2.747072] sdhci: Secure Digital Host Controller Interface driver
  280. [ 2.753494] sdhci: Copyright(c) Pierre Ossman
  281. [ 2.758019] sdhci-pltfm: SDHCI platform and OF driver helper
  282. [ 2.764164] xenon-sdhci d00d0000.sdhci: Failed to setup input clk: -517
  283. [ 2.770978] ledtrig-cpu: registered to indicate activity on CPUs
  284. [ 2.776972] hidraw: raw HID events driver (C) Jiri Kosina
  285. [ 2.784927] NET: Registered protocol family 10
  286. [ 2.790320] NET: Registered protocol family 17
  287. [ 2.795020] Distributed Switch Architecture driver version 0.1
  288. [ 2.800985] Key type dns_resolver registered
  289. [ 2.805861] registered taskstats version 1
  290. [ 2.812334] Btrfs loaded
  291. [ 2.827051] Key type encrypted registered
  292. [ 2.836824] mvneta d0030000.ethernet eth0: Using device tree mac address 00:51:82:11:22:00
  293. [ 3.045965] PCI host bridge /soc/pcie@d0070000 ranges:
  294. [ 3.051142] MEM 0xe8000000..0xe8ffffff -> 0xe8000000
  295. [ 3.056168] IO 0xe9000000..0xe900ffff -> 0xe9000000
  296. [ 4.061693] advk-pcie d0070000.pcie: link never came up
  297. [ 4.066859] advk-pcie d0070000.pcie: PCI host bridge to bus 0000:00
  298. [ 4.073511] pci_bus 0000:00: root bus resource [bus 00-ff]
  299. [ 4.079262] pci_bus 0000:00: root bus resource [mem 0xe8000000-0xe8ffffff]
  300. [ 4.086385] pci_bus 0000:00: root bus resource [io 0x0000-0xffff] (bus address [0xe9000000-0xe900ffff])
  301. [ 5.527760] advk-pcie d0070000.pcie: Posted PIO Response Status: CA, 0xe00 @ 0x0
  302. [ 5.538190] ahci-mvebu d00e0000.sata: AHCI 0001.0300 32 slots 1 ports 6 Gbps 0x1 impl platform mode
  303. [ 5.547298] ahci-mvebu d00e0000.sata: flags: ncq sntf led only pmp fbs pio slum part sxs
  304. [ 5.556515] scsi host0: ahci-mvebu
  305. [ 5.560336] ata1: SATA max UDMA/133 mmio [mem 0xd00e0000-0xd00e0177] port 0x100 irq 12
  306. [ 5.578769] xhci-hcd d0058000.usb3: xHCI Host Controller
  307. [ 5.584303] xhci-hcd d0058000.usb3: new USB bus registered, assigned bus number 2
  308. [ 5.592167] xhci-hcd d0058000.usb3: hcc params 0x0a000998 hci version 0x100 quirks 0x00010090
  309. [ 5.600799] xhci-hcd d0058000.usb3: irq 9, io mem 0xd0058000
  310. [ 5.607168] hub 2-0:1.0: USB hub found
  311. [ 5.610654] hub 2-0:1.0: 1 port detected
  312. [ 5.615600] xhci-hcd d0058000.usb3: xHCI Host Controller
  313. [ 5.620761] xhci-hcd d0058000.usb3: new USB bus registered, assigned bus number 3
  314. [ 5.628721] usb usb3: We don't know the algorithms for LPM for this host, disabling LPM.
  315. [ 5.637329] hub 3-0:1.0: USB hub found
  316. [ 5.640977] hub 3-0:1.0: 1 port detected
  317. [ 5.645892] xenon-sdhci d00d0000.sdhci: Got CD GPIO
  318. [ 5.650745] xenon-sdhci d00d0000.sdhci: No vmmc regulator found
  319. [ 5.692811] mmc0: SDHCI controller on d00d0000.sdhci [d00d0000.sdhci] using ADMA
  320. [ 5.728127] libphy: mv88e6xxx SMI: probed
  321. [ 5.732352] mdio_bus d0032004.mdio-mi: switch 0x341 probed: Marvell 88E6341, revision 0
  322. [ 5.740392] mvneta d0030000.ethernet eth0: [0]: detected a Marvell 88E6341 switch
  323. [ 5.763997] mmc0: new high speed SDHC card at address aaaa
  324. [ 5.770085] mmcblk0: mmc0:aaaa SL16G 14.8 GiB
  325. [ 5.779499] mmcblk0: p1
  326. [ 5.827106] Generic PHY mv88e6xxx-0:01: attached PHY driver [Generic PHY] (mii_bus:phy_addr=mv88e6xxx-0:01, irq=-1)
  327. [ 5.841308] Generic PHY mv88e6xxx-0:02: attached PHY driver [Generic PHY] (mii_bus:phy_addr=mv88e6xxx-0:02, irq=-1)
  328. [ 5.855337] Generic PHY mv88e6xxx-0:03: attached PHY driver [Generic PHY] (mii_bus:phy_addr=mv88e6xxx-0:03, irq=-1)
  329. [ 5.869788] hctosys: unable to open rtc device (rtc0)
  330. [ 5.884716] ata1: SATA link down (SStatus 0 SControl 300)
  331. [ 5.890522] Freeing unused kernel memory: 360K
  332. [ 5.895081] Freeing alternatives memory: 76K
  333. Loading, please wait...
  334. starting version 229
  335. [ 5.955604] random: systemd-udevd: uninitialized urandom read (16 bytes read, 2 bits of entropy available)
  336. [ 5.961555] random: udevadm: uninitialized urandom read (16 bytes read, 2 bits of entropy available)
  337. [ 5.961820] random: udevadm: uninitialized urandom read (16 bytes read, 2 bits of entropy available)
  338. [ 5.961888] random: udevadm: uninitialized urandom read (16 bytes read, 2 bits of entropy available)
  339. [ 5.962016] random: udevadm: uninitialized urandom read (16 bytes read, 2 bits of entropy available)
  340. [ 5.962430] random: udevadm: uninitialized urandom read (16 bytes read, 2 bits of entropy available)
  341. [ 5.962555] random: udevadm: uninitialized urandom read (16 bytes read, 2 bits of entropy available)
  342. [ 5.963263] random: udevadm: uninitialized urandom read (16 bytes read, 2 bits of entropy available)
  343. [ 5.963998] random: udevadm: uninitialized urandom read (16 bytes read, 2 bits of entropy available)
  344. [ 5.964087] random: udevadm: uninitialized urandom read (16 bytes read, 2 bits of entropy available)
  345. Begin: Loading essential drivers ... done.
  346. Begin: Running /scripts/init-premount ... done.
  347. Begin: Mounting root file system ... Begin: Running /scripts/local-top ... done.
  348. Begin: Running /scripts/local-premount ... Scanning for Btrfs filesystems
  349. done.
  350. Begin: Will now check root file system ... fsck from util-linux 2.27.1
  351. [/sbin/fsck.ext4 (1) -- /dev/mmcblk0p1] fsck.ext4 -a -C0 /dev/mmcblk0p1
  352. /dev/mmcblk0p1: clean, 74087/934560 files, 673156/3850384 blocks
  353. done.
  354. [ 6.626146] EXT4-fs (mmcblk0p1): mounted filesystem with writeback data mode. Opts: (null)
  355. done.
  356. Begin: Running /scripts/local-bottom ... done.
  357. Begin: Running /scripts/init-bottom ... done.
  358. [ 7.122309] systemd[1]: System time before build time, advancing clock.
  359. [ 7.170978] systemd[1]: systemd 229 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN)
  360. [ 7.190310] systemd[1]: Detected architecture arm64.
  361.  
  362. Welcome to Ubuntu 16.04.3 LTS!
  363.  
  364. [ 7.216502] systemd[1]: Set hostname to <ebin>.
  365. [ 7.661921] systemd[1]: Listening on fsck to fsckd communication Socket.
  366. [ OK ] Listening on fsck to fsckd communication Socket.
  367. [ 7.680942] systemd[1]: Reached target Encrypted Volumes.
  368. [ OK ] Reached target Encrypted Volumes.
  369. [ 7.693194] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
  370. [ OK ] Started Forward Password Requests to Wall Directory Watch.
  371. [ 7.712891] systemd[1]: Reached target Remote File Systems (Pre).
  372. [ OK ] Reached target Remote File Systems (Pre).
  373. [ 7.729322] systemd[1]: Listening on Network Service Netlink Socket.
  374. [ OK ] Listening on Network Service Netlink Socket.
  375. [ 7.745552] systemd[1]: Created slice User and Session Slice.
  376. [ OK ] Created slice User and Session Slice.
  377. [ 7.761184] systemd[1]: Listening on udev Kernel Socket.
  378. [ OK ] Listening on udev Kernel Socket.
  379. [ 7.776893] systemd[1]: Reached target Remote File Systems.
  380. [ OK ] Reached target Remote File Systems.
  381. [ 7.793220] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
  382. [ OK ] Started Dispatch Password Requests to Console Directory Watch.
  383. [ 7.813375] systemd[1]: Listening on Journal Audit Socket.
  384. [ OK ] Listening on Journal Audit Socket.
  385. [ 7.829151] systemd[1]: Listening on Journal Socket (/dev/log).
  386. [ OK ] Listening on Journal Socket (/dev/log).
  387. [ 7.845100] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
  388. [ OK ] Listening on /dev/initctl Compatibility Named Pipe.
  389. [ 7.861199] systemd[1]: Started Trigger resolvconf update for networkd DNS.
  390. [ OK ] Started Trigger resolvconf update for networkd DNS.
  391. [ 7.877189] systemd[1]: Listening on udev Control Socket.
  392. [ OK ] Listening on udev Control Socket.
  393. [ 7.892927] systemd[1]: Reached target Paths.
  394. [ OK ] Reached target Paths.
  395. [ 7.905592] systemd[1]: Created slice System Slice.
  396. [ OK ] Created slice System Slice.
  397. [ 7.917661] systemd[1]: Created slice system-serial\x2dgetty.slice.
  398. [ OK ] Created slice system-serial\x2dgetty.slice.
  399. [ 7.933301] systemd[1]: Listening on Journal Socket.
  400. [ OK ] Listening on Journal Socket.
  401. [ 7.961223] systemd[1]: Starting Nameserver information manager...
  402. Starting Nameserver information manager...
  403. [ 7.981061] systemd[1]: Starting Set console keymap...
  404. Starting Set console keymap...
  405. [ 7.996916] systemd[1]: Mounting POSIX Message Queue File System...
  406. Mounting POSIX Message Queue File System...
  407. [ 8.015398] systemd[1]: Starting Create list of required static device nodes for the current kernel...
  408. Starting Create list of required st... nodes for the current kernel...
  409. [ 8.045781] systemd[1]: Starting Load Kernel Modules...
  410. Starting Load Kernel Modules...
  411. [ 8.064494] systemd[1]: Starting Remount Root and Kernel File Systems...
  412. Starting Remount Root and Kernel File Systems...
  413. [ 8.085611] systemd[1]: Mounting Huge Pages File System...
  414. Mounting Huge Pages File System...
  415. [ 8.111957] EXT4-fs (mmcblk0p1): re-mounted. Opts: commit=600,errors=remount-ro
  416. [ 8.129082] systemd[1]: Mounting Debug File System...
  417. Mounting Debug File System...
  418. [ OK ] Reached target Slices.hed target Slices.
  419. [ 8.157067] systemd[1]: Listening on Syslog Socket.
  420. [ OK ] Listening on Syslog Socket.
  421. [ 8.190429] systemd[1]: Starting Restore / save the current clock...
  422. Starting Restore / save the current clock...
  423. [ 8.225337] systemd[1]: Mounted Huge Pages File System.
  424. [ OK ] Mounted Huge Pages File System.
  425. [ 8.245048] systemd[1]: Mounted Debug File System.
  426. [ OK ] Mounted Debug File System.
  427. [ OK ] Mounted POSIX Message Queue File System.Queue File System.
  428. [ 8.291777] systemd[1]: Started Set console keymap.
  429. [ OK ] Started Set console keymap.
  430. [ 8.306608] systemd[1]: Started Create list of required static device nodes for the current kernel.
  431. [ OK ] Started Create list of required sta...ce nodes for the current kernel.
  432. [ 8.330486] systemd[1]: Started Load Kernel Modules.
  433. [ OK ] Started Load Kernel Modules.
  434. [ 8.346418] systemd[1]: Started Remount Root and Kernel File Systems.
  435. [ OK ] Started Remount Root and Kernel File Systems.
  436. [ 8.363415] systemd[1]: Started Restore / save the current clock.
  437. [ OK ] Started Restore / save the current clock.
  438. [ 8.395408] systemd[1]: Started Nameserver information manager.
  439. [ OK ] Started Nameserver information manager.
  440. [ 8.432433] systemd[1]: Time has been changed
  441. [ 8.639898] systemd[1]: Reached target Network (Pre).
  442. [ OK ] Reached target Network (Pre).
  443. [ 8.664971] systemd[1]: Activating swap /var/swap...
  444. Activating swap /var/swap...
  445. [ 8.683768] systemd[1]: Starting udev Coldplug all Devices...
  446. Starting udev Coldplug all Devices...
  447. [ 8.737347] systemd[1]: Starting Load/Save Random Seed...
  448. Starting Load/Save Random Seed...
  449. [ 8.757847] systemd[1]: Starting Apply Kernel Variables...
  450. Starting Apply Kernel Variables...
  451. Mounting Configuration File System...
  452. Mounting FUSE Control File System...
  453. Starting Create Static Device Nodes in /dev...
  454. [ OK ] Activated swap /var/swap.
  455. [ OK ] Mounted FUSE Control File System.
  456. [ OK ] Mounted Configuration File System.
  457. [ OK ] Started Load/Save Random Seed.
  458. [ OK ] Started Apply Kernel Variables.
  459. [ OK ] Started Create Static Device Nodes in /dev.
  460. [ OK ] Started udev Coldplug all Devices.
  461. [ OK ] Reached target Local File Systems (Pre).
  462. Mounting /tmp...
  463. Starting udev Kernel Device Manager...
  464. [ OK ] Reached target Swap.
  465. [ OK ] Mounted /tmp.
  466. [ OK ] Reached target Local File Systems.
  467. Starting LSB: Restore and store ALSA driver settings...
  468. Starting Set console font and keymap...
  469. Starting Raise network interfaces...
  470. Starting Armbian enhanced Log2Ram...
  471. [ OK ] Started Entropy daemon using the HAVEGE algorithm.
  472. [ OK ] Started udev Kernel Device Manager.
  473. [ OK ] Started LSB: Restore and store ALSA driver settings.
  474. Starting Network Service...
  475. [ OK ] Started Network Service.
  476. Starting Update resolvconf for networkd DNS...
  477. [ OK ] Started Armbian enhanced Log2Ram.
  478. Starting Journal Service...
  479. [ OK ] Started Set console font and keymap.
  480. [ OK ] Started Journal Service.
  481. Starting Flush Journal to Persistent Storage...
  482. [ OK ] Created slice system-getty.slice.
  483. [ OK ] Started Flush Journal to Persistent Storage.
  484. Starting Create Volatile Files and Directories...
  485. [ OK ] Found device /dev/ttyMV0.
  486. [ OK ] Started Raise network interfaces.
  487. [ OK ] Started Create Volatile Files and Directories.
  488. [ OK ] Reached target System Time Synchronized.
  489. Starting Update UTMP about System Boot/Shutdown...
  490. [ OK ] Started Update UTMP about System Boot/Shutdown.
  491. [ OK ] Reached target System Initialization.
  492. [ OK ] Started Daily Cleanup of Temporary Directories.
  493. [ OK ] Listening on D-Bus System Message Bus Socket.
  494. [ OK ] Reached target Sockets.
  495. [ OK ] Reached target Basic System.
  496. Starting Permit User Sessions...
  497. Starting LSB: Starts LIRC daemon....
  498. Starting LSB: Armbian gathering hardware information...
  499. Starting System Logging Service...
  500. Starting LSB: Load kernel modules needed to enable cpufreq scaling...
  501. [ OK ] Started Regular background program processing daemon.
  502. Starting Login Service...
  503. [ OK ] Started D-Bus System Message Bus.
  504. Starting Network Manager...
  505. Starting LSB: Start/stop sysstat's sadc...
  506. [ OK ] Started System Logging Service.
  507. [ OK ] Started Permit User Sessions.
  508. [ OK ] Started LSB: Starts LIRC daemon..
  509. [ OK ] Started LSB: Start/stop sysstat's sadc.
  510. [ OK ] Started Login Service.
  511. Starting Set console scheme...
  512. [ OK ] Started Set console scheme.
  513. [ OK ] Started LSB: Load kernel modules needed to enable cpufreq scaling.
  514. Starting LSB: set CPUFreq kernel parameters...
  515. [ OK ] Started Network Manager.
  516. [ OK ] Reached target Network.
  517. Starting OpenBSD Secure Shell server...
  518. Starting Network Name Resolution...
  519. [ OK ] Started Unattended Upgrades Shutdown.
  520. Starting Network Manager Wait Online...
  521. [ OK ] Started LSB: set CPUFreq kernel parameters.
  522. [ OK ] Started Network Name Resolution.
  523. Starting Network Manager Script Dispatcher Service...
  524. Starting LSB: Set sysfs variables from /etc/sysfs.conf...
  525. [ OK ] Started LSB: Set sysfs variables from /etc/sysfs.conf.
  526. [ OK ] Started OpenBSD Secure Shell server.
  527. [ OK ] Started Network Manager Script Dispatcher Service.
  528. Starting Hostname Service...
  529. [ OK ] Started Hostname Service.
  530. Starting Authenticate and Authorize Users to Run Privileged Tasks...
  531. [ OK ] Started Authenticate and Authorize Users to Run Privileged Tasks.
  532. [ OK ] Started Network Manager Wait Online.
  533. [ OK ] Started Update resolvconf for networkd DNS.
  534. [ OK ] Reached target Network is Online.
  535. Starting LSB: disk temperature monitoring daemon...
  536. [ OK ] Started Daily apt download activities.
  537. [ OK ] Started Daily apt upgrade and clean activities.
  538. [ OK ] Reached target Timers.
  539. Starting /etc/rc.local Compatibility...
  540. Starting LSB: Apache2 web server...
  541. Starting LSB: Start NTP daemon...
  542. Starting LSB: Advanced IEEE 802.11 management daemon...
  543. [ OK ] Started /etc/rc.local Compatibility.
  544. [ OK ] Started LSB: Advanced IEEE 802.11 management daemon.
  545. [ OK ] Started LSB: disk temperature monitoring daemon.
  546. [ OK ] Started Getty on tty1.
  547. [ OK ] Started Serial Getty on ttyMV0.
  548. [ OK ] Reached target Login Prompts.
  549. [ OK ] Started LSB: Armbian gathering hardware information.
  550. [ OK ] Started LSB: Start NTP daemon.
  551. [ OK ] Started LSB: Apache2 web server.
  552. [ OK ] Reached target Multi-User System.
  553. [ OK ] Reached target Graphical Interface.
  554. Starting Update UTMP about System Runlevel Changes...
  555. [ OK ] Started Update UTMP about System Runlevel Changes.
  556.  
  557. Ubuntu 16.04.3 LTS ebin ttyMV0
  558.  
  559. ebin login:
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement
Public Pastes
Advertisement
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!