================================


BMC reset --

OB Build Timestamp = 1207320877

PPC970InitDrv: Get_NV_Data: There are 4 CPU cores.
  VccOffset = 50 mV
PPC970InitDrv: Freq2Idx[ ] does not support specified frequency of 2520 MHz.                 : Hardcoding to 2500 MHz

Serial console jumper is set to display SLOF output.

SLOF **********************************************************************
JS2XBlade Starting
 Build Date = Jun 20 2009 18:13:46
 FW Version = JX-1.7.0-6
 Check ROM  = OK
 Press "s" to enter Open Firmware.


U4 DDR2 memory controller setup V2.1
------------------------------------
> detected board              : BIMINI
> detected DIMM configuration : 18432Mb @ 667Mhz, CL 5
> initializing memory         :
  [core clock reset:        OK]
  [fastpath        :       OFF]
  [register setup  :        OK]
  [start DDR clock :        OK]
  [memory init     :        OK]
  [auto calibration:        OK]
  [background scrub:        OK]
  [flush cache     :        OK]
> initialization complete.

 Switching top HT bus to 800MHz...
 Adapters on 00000000f2000000
                     00 0800 (B) : 1166 0130    pci*
                     01 0800 (D) : 1014 02bd    obsidian

    Controller         :           IBM      572C001SISIOA
     Disk (Generic)    : @00,00,00 IBM-ESXS ST373455SS         73.4GB

                     00 1000 (B) : 1166 0130    pci*
                     02 2000 (D) : 14e4 166a    network [ ethernet ]
                     02 2100 (D) : 14e4 166a    network [ ethernet ]
                     00 1800 (B) : 1166 0132    pci
                     00 2000 (B) : 1166 0132    pci
                     00 2800 (B) : 1166 0132    pci
                     00 3000 (B) : 1166 0132    pci
                     00 3800 (B) : 1022 7460    pci
                     07 0000 (D) : 1022 7464    serial bus [ usb-ohci ]
                     07 0100 (D) : 1022 7464    serial bus [ usb-ohci ]
                     07 1000 (D) : 13a8 0152    16550-serial*
                     00 4000 (D) : 1022 7468    isa
                     00 4100 (D) : 1022 7469    ide
   CH 0 / MA (@0 ) : ATAPI-Drive  "HL-DT-ST RW/DVD GCC-H20N" (removable media) empty (0 ) -
C0203
 Adapters on 00000000f1000000
                     f0 0000 (B) : 106b 005b    pci*
                     f1 0000 (D) : 1002 71c1    vga
                     f1 0100 (D) : 1002 71e1    display
VGA Device found: /pciex/pci@0/vga@0 initializing...
 VGA initialization: detecting displays...
  VGA initialization done.
 Scan USB...

SYSTEM INFORMATION
 Processor  = PowerPC,970MP @ 2500 MHz
 I/O Bridge = U4 (4.4)
 SMP Size   = 4 (#0 #1 #2 #3)
 Boot-Date  = 2000-00-00 00:01:02
 Memory     = 18 GB of RAM @ 666 MHz
 Board Type = Bimini (7047191/0000000/1)
 MFG Date   = 1608
 Part No.   = 10N8748
 FRU No.    = 10N7182
 FRU Serial = YL30W810902B
 UUID       = 00000000000000000000000000000000
 Flashside  = 1 (temporary)
 Version    = JX0107006
 Build Date = 06-20-2009 18:13


  Welcome to Open Firmware

  Copyright (c) 2004, 2008 IBM Corporation All rights reserved.
  This program and the accompanying materials are made available
  under the terms of the BSD License available at
  http://www.opensource.org/licenses/bsd-license.php

Trying to load:  from: /ht/pci@1/obsidian@1/disk@0,0,0 ...   Successfully loaded