API tools faq
paste
Guest User

Untitled

a guest
Jul 21st, 2023
91
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 9.08 KB | None | 0 0
raw download clone embed print report
  1. smartctl 7.3 2022-02-28 r5338 [x86_64-linux-6.4.2-arch1-1] (local build)
  2. Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org
  3.  
  4. === START OF INFORMATION SECTION ===
  5. Model Family: Western Digital Scorpio Blue Serial ATA
  6. Device Model: WDC WD2500BEVS-22UST0
  7. Serial Number: WD-WXEX07493960
  8. LU WWN Device Id: 5 0014ee 200a916c8
  9. Firmware Version: 01.01A01
  10. User Capacity: 250,059,350,016 bytes [250 GB]
  11. Sector Size: 512 bytes logical/physical
  12. Device is: In smartctl database 7.3/5319
  13. ATA Version is: ATA8-ACS (minor revision not indicated)
  14. Local Time is: Fri Jul 21 23:32:09 2023 CET
  15. SMART support is: Available - device has SMART capability.
  16. SMART support is: Enabled
  17.  
  18. === START OF READ SMART DATA SECTION ===
  19. SMART overall-health self-assessment test result: PASSED
  20.  
  21. General SMART Values:
  22. Offline data collection status: (0x00) Offline data collection activity
  23. was never started.
  24. Auto Offline Data Collection: Disabled.
  25. Self-test execution status: ( 0) The previous self-test routine completed
  26. without error or no self-test has ever
  27. been run.
  28. Total time to complete Offline
  29. data collection: ( 9180) seconds.
  30. Offline data collection
  31. capabilities: (0x7b) SMART execute Offline immediate.
  32. Auto Offline data collection on/off support.
  33. Suspend Offline collection upon new
  34. command.
  35. Offline surface scan supported.
  36. Self-test supported.
  37. Conveyance Self-test supported.
  38. Selective Self-test supported.
  39. SMART capabilities: (0x0003) Saves SMART data before entering
  40. power-saving mode.
  41. Supports SMART auto save timer.
  42. Error logging capability: (0x01) Error logging supported.
  43. General Purpose Logging supported.
  44. Short self-test routine
  45. recommended polling time: ( 2) minutes.
  46. Extended self-test routine
  47. recommended polling time: ( 110) minutes.
  48. Conveyance self-test routine
  49. recommended polling time: ( 5) minutes.
  50. SCT capabilities: (0x303f) SCT Status supported.
  51. SCT Error Recovery Control supported.
  52. SCT Feature Control supported.
  53. SCT Data Table supported.
  54.  
  55. SMART Attributes Data Structure revision number: 16
  56. Vendor Specific SMART Attributes with Thresholds:
  57. ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
  58. 1 Raw_Read_Error_Rate 0x000f 200 200 051 Pre-fail Always - 372
  59. 3 Spin_Up_Time 0x0003 188 185 021 Pre-fail Always - 1600
  60. 4 Start_Stop_Count 0x0032 095 095 000 Old_age Always - 5156
  61. 5 Reallocated_Sector_Ct 0x0033 200 200 140 Pre-fail Always - 0
  62. 7 Seek_Error_Rate 0x000f 100 253 051 Pre-fail Always - 0
  63. 9 Power_On_Hours 0x0032 091 091 000 Old_age Always - 6611
  64. 10 Spin_Retry_Count 0x0013 100 100 051 Pre-fail Always - 0
  65. 11 Calibration_Retry_Count 0x0012 100 100 051 Old_age Always - 0
  66. 12 Power_Cycle_Count 0x0032 096 096 000 Old_age Always - 4677
  67. 192 Power-Off_Retract_Count 0x0032 199 199 000 Old_age Always - 1432
  68. 193 Load_Cycle_Count 0x0032 182 182 000 Old_age Always - 55579
  69. 194 Temperature_Celsius 0x0022 103 088 000 Old_age Always - 44
  70. 196 Reallocated_Event_Count 0x0032 200 200 000 Old_age Always - 0
  71. 197 Current_Pending_Sector 0x0012 200 200 000 Old_age Always - 6
  72. 198 Offline_Uncorrectable 0x0010 100 253 000 Old_age Offline - 0
  73. 199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 2
  74. 200 Multi_Zone_Error_Rate 0x0009 100 253 051 Pre-fail Offline - 0
  75.  
  76. SMART Error Log Version: 1
  77. ATA Error Count: 2378 (device log contains only the most recent five errors)
  78. CR = Command Register [HEX]
  79. FR = Features Register [HEX]
  80. SC = Sector Count Register [HEX]
  81. SN = Sector Number Register [HEX]
  82. CL = Cylinder Low Register [HEX]
  83. CH = Cylinder High Register [HEX]
  84. DH = Device/Head Register [HEX]
  85. DC = Device Command Register [HEX]
  86. ER = Error register [HEX]
  87. ST = Status register [HEX]
  88. Powered_Up_Time is measured from power on, and printed as
  89. DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
  90. SS=sec, and sss=millisec. It "wraps" after 49.710 days.
  91.  
  92. Error 2378 occurred at disk power-on lifetime: 6562 hours (273 days + 10 hours)
  93. When the command that caused the error occurred, the device was active or idle.
  94.  
  95. After command completion occurred, registers were:
  96. ER ST SC SN CL CH DH
  97. -- -- -- -- -- -- --
  98. 40 51 00 00 60 60 e0 Error: UNC at LBA = 0x00606000 = 6316032
  99.  
  100. Commands leading to the command that caused the error were:
  101. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  102. -- -- -- -- -- -- -- -- ---------------- --------------------
  103. 25 00 00 00 60 60 1c 00 02:07:42.427 READ DMA EXT
  104. 25 00 00 00 60 60 1c 00 02:07:38.211 READ DMA EXT
  105. 25 00 00 00 60 60 1c 00 02:07:34.261 READ DMA EXT
  106. 25 00 00 00 60 60 1c 00 02:07:30.311 READ DMA EXT
  107. 25 00 00 00 60 60 1c 00 02:07:26.094 READ DMA EXT
  108.  
  109. Error 2377 occurred at disk power-on lifetime: 6562 hours (273 days + 10 hours)
  110. When the command that caused the error occurred, the device was active or idle.
  111.  
  112. After command completion occurred, registers were:
  113. ER ST SC SN CL CH DH
  114. -- -- -- -- -- -- --
  115. 40 51 00 00 60 60 e0 Error: UNC at LBA = 0x00606000 = 6316032
  116.  
  117. Commands leading to the command that caused the error were:
  118. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  119. -- -- -- -- -- -- -- -- ---------------- --------------------
  120. 25 00 00 00 60 60 1c 00 02:07:38.211 READ DMA EXT
  121. 25 00 00 00 60 60 1c 00 02:07:34.261 READ DMA EXT
  122. 25 00 00 00 60 60 1c 00 02:07:30.311 READ DMA EXT
  123. 25 00 00 00 60 60 1c 00 02:07:26.094 READ DMA EXT
  124. 25 00 00 00 60 60 1c 00 02:07:22.011 READ DMA EXT
  125.  
  126. Error 2376 occurred at disk power-on lifetime: 6562 hours (273 days + 10 hours)
  127. When the command that caused the error occurred, the device was active or idle.
  128.  
  129. After command completion occurred, registers were:
  130. ER ST SC SN CL CH DH
  131. -- -- -- -- -- -- --
  132. 40 51 00 00 60 60 e0 Error: UNC at LBA = 0x00606000 = 6316032
  133.  
  134. Commands leading to the command that caused the error were:
  135. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  136. -- -- -- -- -- -- -- -- ---------------- --------------------
  137. 25 00 00 00 60 60 1c 00 02:07:34.261 READ DMA EXT
  138. 25 00 00 00 60 60 1c 00 02:07:30.311 READ DMA EXT
  139. 25 00 00 00 60 60 1c 00 02:07:26.094 READ DMA EXT
  140. 25 00 00 00 60 60 1c 00 02:07:22.011 READ DMA EXT
  141. 25 00 00 00 60 60 1c 00 02:07:17.928 READ DMA EXT
  142.  
  143. Error 2375 occurred at disk power-on lifetime: 6562 hours (273 days + 10 hours)
  144. When the command that caused the error occurred, the device was active or idle.
  145.  
  146. After command completion occurred, registers were:
  147. ER ST SC SN CL CH DH
  148. -- -- -- -- -- -- --
  149. 40 51 00 00 60 60 e0 Error: UNC at LBA = 0x00606000 = 6316032
  150.  
  151. Commands leading to the command that caused the error were:
  152. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  153. -- -- -- -- -- -- -- -- ---------------- --------------------
  154. 25 00 00 00 60 60 1c 00 02:07:30.311 READ DMA EXT
  155. 25 00 00 00 60 60 1c 00 02:07:26.094 READ DMA EXT
  156. 25 00 00 00 60 60 1c 00 02:07:22.011 READ DMA EXT
  157. 25 00 00 00 60 60 1c 00 02:07:17.928 READ DMA EXT
  158. 25 00 00 00 60 60 1c 00 02:07:13.978 READ DMA EXT
  159.  
  160. Error 2374 occurred at disk power-on lifetime: 6562 hours (273 days + 10 hours)
  161. When the command that caused the error occurred, the device was active or idle.
  162.  
  163. After command completion occurred, registers were:
  164. ER ST SC SN CL CH DH
  165. -- -- -- -- -- -- --
  166. 40 51 00 00 60 60 e0 Error: UNC at LBA = 0x00606000 = 6316032
  167.  
  168. Commands leading to the command that caused the error were:
  169. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  170. -- -- -- -- -- -- -- -- ---------------- --------------------
  171. 25 00 00 00 60 60 1c 00 02:07:26.094 READ DMA EXT
  172. 25 00 00 00 60 60 1c 00 02:07:22.011 READ DMA EXT
  173. 25 00 00 00 60 60 1c 00 02:07:17.928 READ DMA EXT
  174. 25 00 00 00 60 60 1c 00 02:07:13.978 READ DMA EXT
  175. 25 00 00 00 60 60 1c 00 02:07:09.895 READ DMA EXT
  176.  
  177. SMART Self-test log structure revision number 1
  178. No self-tests have been logged. [To run self-tests, use: smartctl -t]
  179.  
  180. SMART Selective self-test log data structure revision number 1
  181. SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
  182. 1 0 0 Not_testing
  183. 2 0 0 Not_testing
  184. 3 0 0 Not_testing
  185. 4 0 0 Not_testing
  186. 5 0 0 Not_testing
  187. Selective self-test flags (0x0):
  188. After scanning selected spans, do NOT read-scan remainder of disk.
  189. If Selective self-test is pending on power-up, resume after 0 minute delay.
Advertisement
Add Comment
Please, Sign In to add comment
Public Pastes
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!