API tools faq
paste
Advertisement
Guest User

Untitled

a guest
Sep 29th, 2021
74
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 33.92 KB | None | 0 0
raw download clone embed print report
  1. Found qca8k switch in ath79/ar1022_iodata_wn-ag300dgr.dts
  2. Conf for cpu port0, Mode rgmii-id, With tx-internal-delay-ps of 2000
  3. ######################END################################
  4. Found qca8k switch in ath79/qca9558_sitecom_wlr-8100.dts
  5. Conf for cpu port0, Mode rgmii-id, With qca,mac6-exchange
  6. Custom rule for phy0123 applied using qca,led_rules, blink-auto, tx-blink, rx-blink, link-10M, link-100M, link-1000M, power-on-reset
  7. port0 led1 is set to mode rule
  8. Custom rule for phy4 applied using qca,led_rules, blink-auto, tx-blink, rx-blink, link-10M, link-100M, link-1000M, power-on-reset
  9. port4 led1 is set to mode rule
  10. Custom rule for phy0123 applied using qca,led_rules
  11.  
  12. Custom rule for phy4 applied using qca,led_rules
  13.  
  14. Custom rule for phy0123 applied using qca,led_rules
  15.  
  16. Custom rule for phy4 applied using qca,led_rules
  17.  
  18. port1 led 0 is set to mode rule
  19. port1 led 1 is set to mode off
  20. port1 led 2 is set to mode off
  21. port2 led 0 is set to mode rule
  22. port2 led 1 is set to mode off
  23. port2 led 2 is set to mode off
  24. port3 led 0 is set to mode rule
  25. port3 led 1 is set to mode off
  26. port3 led 2 is set to mode off
  27. ######################END################################
  28. Found qca8k switch in ath79/ar9342_ubnt_wa_2port.dtsi
  29. Conf for cpu port0, Mode rgmii-id
  30. Custom rule for phy0123 applied using qca,led_rules, blink-auto, tx-blink, rx-blink, collision-blink, link-10M, link-100M, link-1000M, power-on-reset, half-duplex, full-duplex
  31. port0 led3 is set to mode rule
  32. Custom rule for phy4 applied using qca,led_rules, blink-auto, tx-blink, rx-blink, collision-blink, link-10M, link-100M, link-1000M, power-on-reset, half-duplex, full-duplex
  33. port4 led3 is set to mode rule
  34. port1 led 0 is set to mode rule
  35. port1 led 1 is set to mode rule
  36. port1 led 2 is set to mode rule
  37. port2 led 0 is set to mode rule
  38. port2 led 1 is set to mode rule
  39. port2 led 2 is set to mode rule
  40. port3 led 0 is set to mode rule
  41. port3 led 1 is set to mode rule
  42. port3 led 2 is set to mode rule
  43. ######################END################################
  44. Found qca8k switch in ath79/qca9563_phicomm_k2t.dts
  45. Conf for cpu port0, Mode sgmii, With qca,sgmii-rxclk-falling-edge
  46. Set qca,power-on-sel in switch node, Set qca,led-open-drain in switch node
  47. Custom rule for phy0123 applied using qca,led_rules, blink-auto, tx-blink, rx-blink, link-10M, link-100M, power-on-reset
  48. port0 led2 is set to mode rule
  49. Custom rule for phy4 applied using qca,led_rules, blink-auto, tx-blink, rx-blink, link-10M, link-100M, power-on-reset
  50. port4 led2 is set to mode rule
  51. Custom rule for phy0123 applied using qca,led_rules
  52.  
  53. Custom rule for phy4 applied using qca,led_rules
  54.  
  55. port1 led 0 is set to mode rule
  56. port1 led 1 is set to mode rule
  57. port1 led 2 is set to mode off
  58. port2 led 0 is set to mode rule
  59. port2 led 1 is set to mode rule
  60. port2 led 2 is set to mode off
  61. port3 led 0 is set to mode rule
  62. port3 led 1 is set to mode rule
  63. port3 led 2 is set to mode off
  64. ######################END################################
  65. Found qca8k switch in ath79/ar9344_qxwlan_e750g-v8-16m.dts
  66. Conf for cpu port0, Mode rgmii-id
  67. Set qca,power-on-sel in switch node, Set qca,led-open-drain in switch node
  68. port1 led 0 is set to mode rule
  69. port1 led 1 is set to mode rule
  70. port1 led 2 is set to mode rule
  71. port2 led 0 is set to mode rule
  72. port2 led 1 is set to mode rule
  73. port2 led 2 is set to mode rule
  74. port3 led 0 is set to mode rule
  75. port3 led 1 is set to mode rule
  76. port3 led 2 is set to mode rule
  77. ######################END################################
  78. Found qca8k switch in ath79/ar9344_qxwlan_e750g-v8-8m.dts
  79. Conf for cpu port0, Mode rgmii-id
  80. Set qca,power-on-sel in switch node, Set qca,led-open-drain in switch node
  81. port1 led 0 is set to mode rule
  82. port1 led 1 is set to mode rule
  83. port1 led 2 is set to mode rule
  84. port2 led 0 is set to mode rule
  85. port2 led 1 is set to mode rule
  86. port2 led 2 is set to mode rule
  87. port3 led 0 is set to mode rule
  88. port3 led 1 is set to mode rule
  89. port3 led 2 is set to mode rule
  90. ######################END################################
  91. Found qca8k switch in ath79/ar9344_ubnt_unifi-ap-pro.dts
  92. Conf for cpu port0, Mode rgmii-id
  93. Set qca,power-on-sel in switch node
  94. ######################END################################
  95. Found qca8k switch in ath79/ar9344_devolo_dlan_wifi.dtsi
  96. Conf for cpu port0, Mode rgmii-txid
  97. Absent config (regs set to 0x0) for pad5. Not attached port5?
  98. Absent config (regs set to 0x0) for pad6. Not attached port6?
  99. ######################END################################
  100. Found qca8k switch in ath79/qca9563_tplink_archer-x6-v2.dtsi
  101. Conf for cpu port0, Mode sgmii, With qca,sgmii-rxclk-falling-edge
  102. ######################END################################
  103. Found qca8k switch in ath79/qca9563_tplink_tl-wpa8630.dtsi
  104. Conf for cpu port0, Mode sgmii, With qca,sgmii-rxclk-falling-edge
  105. ######################END################################
  106. Found qca8k switch in ath79/qca9557_iodata_wn-ac-dgr.dtsi
  107. Conf for cpu port0, Mode rgmii-id, With qca,mac6-exchange
  108. ######################END################################
  109. Found qca8k switch in ath79/ar9344_pcs_cr5000.dts
  110. Conf for cpu port0, Mode rgmii-id
  111. Set qca,power-on-sel in switch node, Set qca,led-open-drain in switch node
  112. port1 led 0 is set to mode rule
  113. port1 led 1 is set to mode rule
  114. port1 led 2 is set to mode rule
  115. port2 led 0 is set to mode rule
  116. port2 led 1 is set to mode rule
  117. port2 led 2 is set to mode rule
  118. port3 led 0 is set to mode rule
  119. port3 led 1 is set to mode rule
  120. port3 led 2 is set to mode rule
  121. ######################END################################
  122. Found qca8k switch in ath79/qca9563_nec_wg1200cr.dts
  123. Conf for cpu port0, Mode sgmii
  124. port1 led 0 is set to mode rule
  125. port1 led 1 is set to mode rule
  126. port1 led 2 is set to mode rule
  127. port2 led 0 is set to mode rule
  128. port2 led 1 is set to mode rule
  129. port2 led 2 is set to mode rule
  130. port3 led 0 is set to mode rule
  131. port3 led 1 is set to mode rule
  132. port3 led 2 is set to mode rule
  133. ######################END################################
  134. Found qca8k switch in ath79/ar9342_iodata_etg3-r.dts
  135. Conf for cpu port0, Mode rgmii-id
  136. Custom rule for phy0123 applied using qca,led_rules, blink-auto, tx-blink, rx-blink, collision-blink, link-10M, link-100M, link-1000M, power-on-reset, half-duplex, full-duplex
  137. port0 led1 is set to mode rule
  138. Custom rule for phy4 applied using qca,led_rules, blink-auto, tx-blink, rx-blink, collision-blink, link-10M, link-100M, link-1000M, power-on-reset, half-duplex, full-duplex
  139. port4 led1 is set to mode rule
  140. Custom rule for phy0123 applied using qca,led_rules, blink-auto, tx-blink, rx-blink, collision-blink, link-10M, link-100M, link-1000M, power-on-reset, half-duplex, full-duplex
  141. port0 led2 is set to mode rule
  142. Custom rule for phy4 applied using qca,led_rules, blink-auto, tx-blink, rx-blink, collision-blink, link-10M, link-100M, link-1000M, power-on-reset, half-duplex, full-duplex
  143. port4 led2 is set to mode rule
  144. Custom rule for phy0123 applied using qca,led_rules, blink-auto, tx-blink, rx-blink, collision-blink, link-10M, link-100M, link-1000M, power-on-reset, half-duplex, full-duplex
  145. port0 led3 is set to mode rule
  146. Custom rule for phy4 applied using qca,led_rules, blink-auto, tx-blink, rx-blink, collision-blink, link-10M, link-100M, link-1000M, power-on-reset, half-duplex, full-duplex
  147. port4 led3 is set to mode rule
  148. port1 led 0 is set to mode rule
  149. port1 led 1 is set to mode rule
  150. port1 led 2 is set to mode rule
  151. port2 led 0 is set to mode rule
  152. port2 led 1 is set to mode rule
  153. port2 led 2 is set to mode rule
  154. port3 led 0 is set to mode rule
  155. port3 led 1 is set to mode rule
  156. port3 led 2 is set to mode rule
  157. ######################END################################
  158. Found qca8k switch in ath79/ar9344_tplink_tl-wdr4300.dtsi
  159. Conf for cpu port0, Mode rgmii-id
  160. Set qca,power-on-sel in switch node
  161. Custom rule for phy0123 applied using qca,led_rules, blink-auto, tx-blink, rx-blink, link-10M, link-100M, link-1000M
  162. port0 led1 is set to mode rule
  163. Custom rule for phy4 applied using qca,led_rules, blink-auto, tx-blink, rx-blink, link-10M, link-100M, link-1000M
  164. port4 led1 is set to mode rule
  165. Custom rule for phy0123 applied using qca,led_rules
  166.  
  167. Custom rule for phy4 applied using qca,led_rules
  168.  
  169. Custom rule for phy0123 applied using qca,led_rules
  170.  
  171. Custom rule for phy4 applied using qca,led_rules
  172.  
  173. port1 led 0 is set to mode rule
  174. port1 led 1 is set to mode off
  175. port1 led 2 is set to mode off
  176. port2 led 0 is set to mode rule
  177. port2 led 1 is set to mode off
  178. port2 led 2 is set to mode off
  179. port3 led 0 is set to mode rule
  180. port3 led 1 is set to mode off
  181. port3 led 2 is set to mode off
  182. ######################END################################
  183. Found qca8k switch in ath79/ar1022_sitecom_wlr-7100.dts
  184. Conf for cpu port0, Mode rgmii-id, With tx-internal-delay-ps of 2000, With qca,mac6-exchange
  185. Conf for cpu port6, Mode rgmii-rxid
  186. Set qca,power-on-sel in switch node
  187. ######################END################################
  188. Found qca8k switch in ath79/qca9558_tplink_tl-wdr4900-v2.dts
  189. Conf for cpu port0, Mode sgmii, With qca,sgmii-rxclk-falling-edge
  190. Conf for cpu port6, Mode rgmii-id
  191. Custom rule for phy0123 applied using qca,led_rules, blink-auto, tx-blink, rx-blink, link-10M, link-100M, link-1000M
  192. port0 led1 is set to mode rule
  193. Custom rule for phy4 applied using qca,led_rules, blink-auto, tx-blink, rx-blink, link-10M, link-100M, link-1000M
  194. port4 led1 is set to mode rule
  195. Custom rule for phy0123 applied using qca,led_rules
  196.  
  197. Custom rule for phy4 applied using qca,led_rules
  198.  
  199. Custom rule for phy0123 applied using qca,led_rules
  200.  
  201. Custom rule for phy4 applied using qca,led_rules
  202.  
  203. port1 led 0 is set to mode rule
  204. port1 led 1 is set to mode off
  205. port1 led 2 is set to mode off
  206. port2 led 0 is set to mode rule
  207. port2 led 1 is set to mode off
  208. port2 led 2 is set to mode off
  209. port3 led 0 is set to mode rule
  210. port3 led 1 is set to mode off
  211. port3 led 2 is set to mode off
  212. ######################END################################
  213. Found qca8k switch in ath79/qca9563_tplink_archer-c7-v4.dts
  214. Conf for cpu port0, Mode sgmii, With qca,sgmii-rxclk-falling-edge, With qca,mac6-exchange
  215. ######################END################################
  216. Found qca8k switch in ath79/qca9563_xiaomi_aiot-ac2350.dts
  217. Conf for cpu port0, Mode sgmii
  218. Conf for cpu port5, Mode rgmii-rxid
  219. Absent config (regs set to 0x0) for pad6. Not attached port6?
  220. !!MISSING TO CONVERT REMAINING BIT 0x60000000 FOR REG 0x10
  221.  
  222. Custom rule for phy0123 applied using qca,led_rules, blink-4hz, tx-blink, rx-blink, link-10M, link-100M, link-1000M, power-on-reset
  223. port0 led1 is set to mode rule
  224. Custom rule for phy4 applied using qca,led_rules, blink-4hz, tx-blink, rx-blink, link-10M, link-100M, link-1000M, power-on-reset
  225. port4 led1 is set to mode rule
  226. port1 led 0 is set to mode rule
  227. port1 led 1 is set to mode rule
  228. port1 led 2 is set to mode rule
  229. port2 led 0 is set to mode rule
  230. port2 led 1 is set to mode rule
  231. port2 led 2 is set to mode rule
  232. port3 led 0 is set to mode rule
  233. port3 led 1 is set to mode rule
  234. port3 led 2 is set to mode rule
  235. Sgmii mode set to PHY If set to PHY you can ignore this settings as qca8k should automatically set this
  236. ######################END################################
  237. Found qca8k switch in ath79/qca9563_netgear_wndr.dtsi
  238. Conf for cpu port0, Mode sgmii
  239. Set qca,power-on-sel in switch node, Set qca,led-open-drain in switch node
  240. Custom rule for phy0123 applied using qca,led_rules, blink-auto, tx-blink, rx-blink, link-10M, link-100M, power-on-reset
  241. port0 led2 is set to mode rule
  242. Custom rule for phy4 applied using qca,led_rules, blink-auto, tx-blink, rx-blink, link-10M, link-100M, power-on-reset
  243. port4 led2 is set to mode rule
  244. Custom rule for phy0123 applied using qca,led_rules
  245.  
  246. Custom rule for phy4 applied using qca,led_rules
  247.  
  248. port1 led 0 is set to mode rule
  249. port1 led 1 is set to mode rule
  250. port1 led 2 is set to mode off
  251. port2 led 0 is set to mode rule
  252. port2 led 1 is set to mode rule
  253. port2 led 2 is set to mode off
  254. port3 led 0 is set to mode rule
  255. port3 led 1 is set to mode rule
  256. port3 led 2 is set to mode off
  257. ######################END################################
  258. Found qca8k switch in ath79/qca9558_librerouter_librerouter-v1.dts
  259. Conf for cpu port0, Mode rgmii-id, With qca,mac6-exchange
  260. Conf for cpu port6, Mode sgmii
  261. Set qca,power-on-sel in switch node, Set qca,led-open-drain in switch node
  262. Custom rule for phy0123 applied using qca,led_rules, blink-auto, tx-blink, rx-blink, link-10M, link-100M, link-1000M, power-on-reset
  263. port0 led1 is set to mode rule
  264. Custom rule for phy4 applied using qca,led_rules, blink-auto, tx-blink, rx-blink, link-10M, link-100M, link-1000M, power-on-reset
  265. port4 led1 is set to mode rule
  266. Custom rule for phy0123 applied using qca,led_rules, blink-auto, tx-blink, rx-blink, link-10M, link-100M, link-1000M, power-on-reset
  267. port0 led2 is set to mode rule
  268. Custom rule for phy4 applied using qca,led_rules, blink-auto, tx-blink, rx-blink, link-10M, link-100M, link-1000M, power-on-reset
  269. port4 led2 is set to mode rule
  270. Custom rule for phy0123 applied using qca,led_rules, blink-auto, tx-blink, rx-blink, link-10M, link-100M, link-1000M, power-on-reset
  271. port0 led3 is set to mode rule
  272. Custom rule for phy4 applied using qca,led_rules, blink-auto, tx-blink, rx-blink, link-10M, link-100M, link-1000M, power-on-reset
  273. port4 led3 is set to mode rule
  274. port1 led 0 is set to mode off
  275. port1 led 1 is set to mode off
  276. port1 led 2 is set to mode off
  277. port2 led 0 is set to mode off
  278. port2 led 1 is set to mode off
  279. port2 led 2 is set to mode off
  280. port3 led 0 is set to mode off
  281. port3 led 1 is set to mode off
  282. port3 led 2 is set to mode off
  283. ######################END################################
  284. Found qca8k switch in ath79/qca9563_compex_wpj563.dts
  285. Conf for cpu port0, Mode sgmii, With qca,sgmii-rxclk-falling-edge
  286. ######################END################################
  287. Found qca8k switch in ath79/qca9563_tplink_tl-wr1043n.dtsi
  288. Conf for cpu port0, Mode sgmii, With qca,sgmii-rxclk-falling-edge
  289. ######################END################################
  290. Found qca8k switch in ath79/qca9563_comfast_cf-e375ac.dts
  291. Conf for cpu port0, Mode sgmii, With qca,sgmii-rxclk-falling-edge
  292. ######################END################################
  293. Found qca8k switch in ath79/ar9344_dlink_dir-8x5.dtsi
  294. !!MISSING TO CONVERT REMAINING BIT 0x40000000 FOR REG 0x10
  295. Set qca,power-on-sel in switch node, Set qca,led-open-drain in switch node
  296. Conf for cpu port0, Mode rgmii-id
  297. Conf for cpu port6, Mode rgmii-rxid
  298. ######################END################################
  299. Found qca8k switch in ath79/qca9563_tplink_archer-x7-v5.dtsi
  300. Conf for cpu port0, Mode sgmii, With qca,sgmii-rxclk-falling-edge, With qca,mac6-exchange
  301. Absent config (regs set to 0x0) for pad5. Not attached port5?
  302. Absent config (regs set to 0x0) for pad6. Not attached port6?
  303.  
  304. ######################END################################
  305. Found qca8k switch in ath79/qca9558_tplink_tl-wr1043nd.dtsi
  306. Conf for cpu port0, Mode sgmii, With qca,sgmii-rxclk-falling-edge
  307. Conf for cpu port6, Mode rgmii-id
  308. Set qca,power-on-sel in switch node, Set qca,led-open-drain in switch node
  309. port1 led 0 is set to mode rule
  310. port1 led 1 is set to mode rule
  311. port1 led 2 is set to mode rule
  312. port2 led 0 is set to mode rule
  313. port2 led 1 is set to mode rule
  314. port2 led 2 is set to mode rule
  315. port3 led 0 is set to mode rule
  316. port3 led 1 is set to mode rule
  317. port3 led 2 is set to mode rule
  318. ######################END################################
  319. Found qca8k switch in ath79/qca9563_rosinson_wr818.dts
  320. Conf for cpu port0, Mode sgmii, With qca,sgmii-rxclk-falling-edge
  321. ######################END################################
  322. Found qca8k switch in ath79/qca9558_dlink_dap-2695-a1.dts
  323. Conf for cpu port0, Mode rgmii-id
  324. Conf for cpu port6, Mode sgmii, With qca,sgmii-rxclk-falling-edge
  325. ######################END################################
  326. Found qca8k switch in ath79/qca9563_elecom_wrc-ghbk2-i.dtsi
  327. Conf for cpu port0, Mode sgmii
  328. Custom rule for phy0123 applied using qca,led_rules, blink-auto, tx-blink, rx-blink, link-10M, link-100M, link-1000M, power-on-reset
  329. port0 led1 is set to mode rule
  330. Custom rule for phy4 applied using qca,led_rules, blink-auto, tx-blink, rx-blink, link-10M, link-100M, link-1000M, power-on-reset
  331. port4 led1 is set to mode rule
  332. Custom rule for phy0123 applied using qca,led_rules
  333.  
  334. Custom rule for phy4 applied using qca,led_rules
  335.  
  336. Custom rule for phy0123 applied using qca,led_rules
  337.  
  338. Custom rule for phy4 applied using qca,led_rules
  339.  
  340. port1 led 0 is set to mode rule
  341. port1 led 1 is set to mode rule
  342. port1 led 2 is set to mode rule
  343. port2 led 0 is set to mode rule
  344. port2 led 1 is set to mode rule
  345. port2 led 2 is set to mode rule
  346. port3 led 0 is set to mode rule
  347. port3 led 1 is set to mode rule
  348. port3 led 2 is set to mode rule
  349. ######################END################################
  350. Found qca8k switch in ath79/qca9558_tplink_archer-d7.dtsi
  351. Conf for cpu port0, Mode sgmii, With qca,sgmii-rxclk-falling-edge
  352. Conf for cpu port6, Mode rgmii-id
  353. Custom rule for phy0123 applied using qca,led_rules, blink-auto, tx-blink, rx-blink, link-10M, link-100M, link-1000M
  354. port0 led1 is set to mode rule
  355. Custom rule for phy4 applied using qca,led_rules, blink-auto, tx-blink, rx-blink, link-10M, link-100M, link-1000M
  356. port4 led1 is set to mode rule
  357. Custom rule for phy0123 applied using qca,led_rules
  358.  
  359. Custom rule for phy4 applied using qca,led_rules
  360.  
  361. Custom rule for phy0123 applied using qca,led_rules
  362.  
  363. Custom rule for phy4 applied using qca,led_rules
  364.  
  365. port1 led 0 is set to mode rule
  366. port1 led 1 is set to mode off
  367. port1 led 2 is set to mode off
  368. port2 led 0 is set to mode rule
  369. port2 led 1 is set to mode off
  370. port2 led 2 is set to mode off
  371. port3 led 0 is set to mode rule
  372. port3 led 1 is set to mode off
  373. port3 led 2 is set to mode off
  374. ######################END################################
  375. Found qca8k switch in ath79/qca9558_dlink_dap-3662-a1.dts
  376. Conf for cpu port0, Mode rgmii-id
  377. Conf for cpu port6, Mode sgmii, With qca,sgmii-rxclk-falling-edge
  378. ######################END################################
  379. Found qca8k switch in ath79/qca9558_engenius_epg5000.dts
  380. Conf for cpu port0, Mode rgmii-id, With qca,mac6-exchange
  381. ######################END################################
  382. Found qca8k switch in ath79/qca9563_tplink_archer-c2-v3.dts
  383. Conf for cpu port0, Mode sgmii, With qca,sgmii-rxclk-falling-edge
  384. ######################END################################
  385. Found qca8k switch in ath79/ar7242_ubnt_edgeswitch-5xp.dts
  386. Conf for cpu port0, Mode rgmii-rxid, With rx-internal-delay-ps of 1000
  387. Conf for cpu port6, Mode rgmii-rxid, With rx-internal-delay-ps of 1000
  388. Custom rule for phy0123 applied using qca,led_rules
  389. port0 led1 is set to mode blink
  390. Custom rule for phy4 applied using qca,led_rules
  391. port4 led1 is set to mode blink
  392. Custom rule for phy0123 applied using qca,led_rules
  393. port0 led2 is set to mode blink
  394. Custom rule for phy4 applied using qca,led_rules
  395. port4 led2 is set to mode blink
  396. Custom rule for phy0123 applied using qca,led_rules
  397. port0 led3 is set to mode blink
  398. Custom rule for phy4 applied using qca,led_rules
  399. port4 led3 is set to mode blink
  400. port1 led 0 is set to mode rule
  401. port1 led 1 is set to mode rule
  402. port1 led 2 is set to mode rule
  403. port2 led 0 is set to mode rule
  404. port2 led 1 is set to mode rule
  405. port2 led 2 is set to mode rule
  406. port3 led 0 is set to mode rule
  407. port3 led 1 is set to mode rule
  408. port3 led 2 is set to mode rule
  409. ######################END################################
  410. Found qca8k switch in ath79/qca9563_glinet_gl-ar750s.dtsi
  411. Conf for cpu port0, Mode sgmii, With qca,sgmii-rxclk-falling-edge
  412. ######################END################################
  413. Found qca8k switch in ath79/qca9558_trendnet_tew-823dru.dts
  414. Conf for cpu port0, Mode sgmii, With qca,sgmii-rxclk-falling-edge
  415. Conf for cpu port6, Mode rgmii-id
  416. Set qca,power-on-sel in switch node, Set qca,led-open-drain in switch node
  417. ######################END################################
  418. Found qca8k switch in ath79/qca9563_dlink_dir-842-c.dtsi
  419. Conf for cpu port0, Mode sgmii, With qca,sgmii-rxclk-falling-edge
  420. Set qca,power-on-sel in switch node, Set qca,led-open-drain in switch node
  421. Custom rule for phy0123 applied using qca,led_rules, blink-auto, tx-blink, rx-blink, link-10M, link-100M, power-on-reset
  422. port0 led2 is set to mode rule
  423. Custom rule for phy4 applied using qca,led_rules, blink-auto, tx-blink, rx-blink, link-10M, link-100M, power-on-reset
  424. port4 led2 is set to mode rule
  425. Custom rule for phy0123 applied using qca,led_rules
  426.  
  427. Custom rule for phy4 applied using qca,led_rules
  428.  
  429. port1 led 0 is set to mode rule
  430. port1 led 1 is set to mode rule
  431. port1 led 2 is set to mode off
  432. port2 led 0 is set to mode rule
  433. port2 led 1 is set to mode rule
  434. port2 led 2 is set to mode off
  435. port3 led 0 is set to mode rule
  436. port3 led 1 is set to mode rule
  437. port3 led 2 is set to mode off
  438. ######################END################################
  439. Found qca8k switch in ath79/ar9342_ubnt_aircube-ac.dts
  440. Conf for cpu port0, Mode rgmii-id
  441. ######################END################################
  442. Found qca8k switch in ath79/qca9557_buffalo_bhr-4grv2.dts
  443. Conf for cpu port0, Mode sgmii, With qca,sgmii-rxclk-falling-edge, With qca,mac6-exchange
  444. Conf for cpu port6, Mode rgmii-id
  445. ######################END################################
  446. Found qca8k switch in ath79/qca955x_zyxel_nbg6x16.dtsi
  447. Conf for cpu port0, Mode rgmii-id, With qca,mac6-exchange
  448. Conf for cpu port6, Mode sgmii, With qca,sgmii-rxclk-falling-edge
  449. Set qca,power-on-sel in switch node, Set qca,led-open-drain in switch node
  450. Custom rule for phy0123 applied using qca,led_rules, blink-auto, tx-blink, rx-blink, collision-blink, link-10M, link-100M, link-1000M, power-on-reset, half-duplex, full-duplex
  451. port0 led1 is set to mode rule
  452. Custom rule for phy4 applied using qca,led_rules, blink-auto, tx-blink, rx-blink, collision-blink, link-10M, link-100M, link-1000M, power-on-reset, half-duplex, full-duplex
  453. port4 led1 is set to mode rule
  454. Custom rule for phy0123 applied using qca,led_rules, blink-auto, tx-blink, rx-blink, collision-blink, link-10M, link-100M, link-1000M, power-on-reset, half-duplex, full-duplex
  455. port0 led2 is set to mode rule
  456. Custom rule for phy4 applied using qca,led_rules, blink-auto, tx-blink, rx-blink, collision-blink, link-10M, link-100M, link-1000M, power-on-reset, half-duplex, full-duplex
  457. port4 led2 is set to mode rule
  458. Custom rule for phy0123 applied using qca,led_rules, blink-auto, tx-blink, rx-blink, collision-blink, link-10M, link-100M, link-1000M, power-on-reset, half-duplex, full-duplex
  459. port0 led3 is set to mode rule
  460. Custom rule for phy4 applied using qca,led_rules, blink-auto, tx-blink, rx-blink, collision-blink, link-10M, link-100M, link-1000M, power-on-reset, half-duplex, full-duplex
  461. port4 led3 is set to mode rule
  462. port1 led 0 is set to mode rule
  463. port1 led 1 is set to mode rule
  464. port1 led 2 is set to mode rule
  465. port2 led 0 is set to mode rule
  466. port2 led 1 is set to mode rule
  467. port2 led 2 is set to mode rule
  468. port3 led 0 is set to mode rule
  469. port3 led 1 is set to mode rule
  470. port3 led 2 is set to mode rule
  471. ######################END################################
  472. Found qca8k switch in ath79/qca9558_qxwlan_e558.dtsi
  473. Conf for cpu port0, Mode sgmii, With qca,sgmii-rxclk-falling-edge
  474. Conf for cpu port6, Mode rgmii-id
  475. Set qca,power-on-sel in switch node, Set qca,led-open-drain in switch node
  476. port1 led 0 is set to mode rule
  477. port1 led 1 is set to mode rule
  478. port1 led 2 is set to mode rule
  479. port2 led 0 is set to mode rule
  480. port2 led 1 is set to mode rule
  481. port2 led 2 is set to mode rule
  482. port3 led 0 is set to mode rule
  483. port3 led 1 is set to mode rule
  484. port3 led 2 is set to mode rule
  485. ######################END################################
  486. Found qca8k switch in ath79/ar9344_compex_wpj344-16m.dts
  487. Conf for cpu port0, Mode rgmii-id
  488. Set qca,power-on-sel in switch node
  489. Custom rule for phy0123 applied using qca,led_rules
  490.  
  491. Custom rule for phy4 applied using qca,led_rules
  492.  
  493. Custom rule for phy0123 applied using qca,led_rules, blink-auto, tx-blink, rx-blink, link-10M, link-100M, link-1000M
  494. port0 led2 is set to mode rule
  495. Custom rule for phy4 applied using qca,led_rules, blink-auto, tx-blink, rx-blink, link-10M, link-100M, link-1000M
  496. port4 led2 is set to mode rule
  497. Custom rule for phy0123 applied using qca,led_rules
  498.  
  499. Custom rule for phy4 applied using qca,led_rules
  500.  
  501. port1 led 0 is set to mode off
  502. port1 led 1 is set to mode rule
  503. port1 led 2 is set to mode off
  504. port2 led 0 is set to mode off
  505. port2 led 1 is set to mode rule
  506. port2 led 2 is set to mode off
  507. port3 led 0 is set to mode off
  508. port3 led 1 is set to mode rule
  509. port3 led 2 is set to mode off
  510. ######################END################################
  511. Found qca8k switch in ath79/qca9558_compex_wpj558-16m.dts
  512. Conf for cpu port0, Mode sgmii, With qca,sgmii-rxclk-falling-edge
  513. Conf for cpu port6, Mode rgmii-id
  514. Custom rule for phy0123 applied using qca,led_rules
  515.  
  516. Custom rule for phy4 applied using qca,led_rules
  517.  
  518. Custom rule for phy0123 applied using qca,led_rules
  519.  
  520. Custom rule for phy4 applied using qca,led_rules
  521.  
  522. port1 led 0 is set to mode rule
  523. port1 led 1 is set to mode rule
  524. port1 led 2 is set to mode rule
  525. port2 led 0 is set to mode rule
  526. port2 led 1 is set to mode rule
  527. port2 led 2 is set to mode rule
  528. port3 led 0 is set to mode rule
  529. port3 led 1 is set to mode rule
  530. port3 led 2 is set to mode rule
  531. ######################END################################
  532. Found qca8k switch in ath79/qca9563_tplink_eap245-v3.dts
  533. Conf for cpu port0, Mode sgmii, With qca,sgmii-rxclk-falling-edge
  534. Sgmii mode set to PHY If set to PHY you can ignore this settings as qca8k should automatically set this
  535. ######################END################################
  536. Found qca8k switch in ath79/qca9558_domywifi_dw33d.dts
  537. Conf for cpu port0, Mode rgmii-id, With qca,mac6-exchange
  538. Conf for cpu port6, Mode sgmii, With qca,sgmii-rxclk-falling-edge
  539. ######################END################################
  540. Found qca8k switch in ath79/qca9563_ubnt_unifiac-pro.dtsi
  541. Conf for cpu port0, Mode sgmii, With qca,sgmii-rxclk-falling-edge
  542. ######################END################################
  543. Found qca8k switch in ath79/qca9563_yuncore_xd4200.dtsi
  544. Conf for cpu port0, Mode sgmii, With qca,sgmii-rxclk-falling-edge
  545. Set qca,power-on-sel in switch node, Set qca,led-open-drain in switch node
  546. Custom rule for phy0123 applied using qca,led_rules, blink-auto, tx-blink, rx-blink, link-10M, link-100M, link-1000M, power-on-reset
  547. port0 led1 is set to mode rule
  548. Custom rule for phy4 applied using qca,led_rules, blink-auto, tx-blink, rx-blink, link-10M, link-100M, link-1000M, power-on-reset
  549. port4 led1 is set to mode rule
  550. Custom rule for phy0123 applied using qca,led_rules, blink-auto, tx-blink, rx-blink, link-10M, link-100M, link-1000M, power-on-reset
  551. port0 led2 is set to mode rule
  552. Custom rule for phy4 applied using qca,led_rules, blink-auto, tx-blink, rx-blink, link-10M, link-100M, link-1000M, power-on-reset
  553. port4 led2 is set to mode rule
  554. Custom rule for phy0123 applied using qca,led_rules, blink-auto, tx-blink, rx-blink, link-10M, link-100M, link-1000M, power-on-reset
  555. port0 led3 is set to mode rule
  556. Custom rule for phy4 applied using qca,led_rules, blink-auto, tx-blink, rx-blink, link-10M, link-100M, link-1000M, power-on-reset
  557. port4 led3 is set to mode rule
  558. port1 led 0 is set to mode rule
  559. port1 led 1 is set to mode off
  560. port1 led 2 is set to mode off
  561. port2 led 0 is set to mode rule
  562. port2 led 1 is set to mode off
  563. port2 led 2 is set to mode off
  564. port3 led 0 is set to mode off
  565. port3 led 1 is set to mode off
  566. port3 led 2 is set to mode off
  567. ######################END################################
  568. Found qca8k switch in ath79/qca9558_comfast_cf-wr650ac.dtsi
  569. Conf for cpu port0, Mode rgmii-id, With qca,mac6-exchange
  570. Conf for cpu port6, Mode sgmii, With qca,sgmii-rxclk-falling-edge
  571. Set qca,power-on-sel in switch node, Set qca,led-open-drain in switch node
  572. ######################END################################
  573. Found qca8k switch in ath79/ar9344_atheros_db120.dts
  574. Conf for cpu port0, Mode rgmii-id
  575. !!MISSING TO CONVERT REMAINING BIT 0x40000000 FOR REG 0x10
  576. Set qca,power-on-sel in switch node, Set qca,led-open-drain in switch node
  577. ######################END################################
  578. Found qca8k switch in ath79/qca9563_nec_wg800hp.dts
  579. Conf for cpu port0, Mode sgmii
  580. port1 led 0 is set to mode rule
  581. port1 led 1 is set to mode rule
  582. port1 led 2 is set to mode rule
  583. port2 led 0 is set to mode rule
  584. port2 led 1 is set to mode rule
  585. port2 led 2 is set to mode rule
  586. port3 led 0 is set to mode rule
  587. port3 led 1 is set to mode rule
  588. port3 led 2 is set to mode rule
  589. ######################END################################
  590. Found qca8k switch in ath79/qca9550_airtight_c-75.dts
  591. Conf for cpu port0, Mode rgmii-id
  592. Conf for cpu port6, Mode sgmii, With qca,sgmii-rxclk-falling-edge
  593. port1 led 0 is set to mode rule
  594. port1 led 1 is set to mode rule
  595. port1 led 2 is set to mode rule
  596. port2 led 0 is set to mode rule
  597. port2 led 1 is set to mode rule
  598. port2 led 2 is set to mode rule
  599. port3 led 0 is set to mode rule
  600. port3 led 1 is set to mode rule
  601. port3 led 2 is set to mode rule
  602. ######################END################################
  603. Found qca8k switch in ath79/ar9344_wd_mynet-n750.dts
  604. Conf for cpu port0, Mode rgmii-id
  605. Set qca,power-on-sel in switch node
  606. Custom rule for phy0123 applied using qca,led_rules, blink-auto, tx-blink, rx-blink, link-10M, link-100M, link-1000M
  607. port0 led1 is set to mode rule
  608. Custom rule for phy4 applied using qca,led_rules, blink-auto, tx-blink, rx-blink, link-10M, link-100M, link-1000M
  609. port4 led1 is set to mode rule
  610. Custom rule for phy0123 applied using qca,led_rules
  611.  
  612. Custom rule for phy4 applied using qca,led_rules
  613.  
  614. Custom rule for phy0123 applied using qca,led_rules
  615.  
  616. Custom rule for phy4 applied using qca,led_rules
  617.  
  618. port1 led 0 is set to mode rule
  619. port1 led 1 is set to mode off
  620. port1 led 2 is set to mode off
  621. port2 led 0 is set to mode rule
  622. port2 led 1 is set to mode off
  623. port2 led 2 is set to mode off
  624. port3 led 0 is set to mode rule
  625. port3 led 1 is set to mode off
  626. port3 led 2 is set to mode off
  627. ######################END################################
  628. Found qca8k switch in ath79/qca9558_tplink_archer-c.dtsi
  629. Conf for cpu port0, Mode sgmii, With qca,sgmii-rxclk-falling-edge
  630. Conf for cpu port6, Mode rgmii-id
  631. Custom rule for phy0123 applied using qca,led_rules, blink-auto, tx-blink, rx-blink, link-10M, link-100M, link-1000M
  632. port0 led1 is set to mode rule
  633. Custom rule for phy4 applied using qca,led_rules, blink-auto, tx-blink, rx-blink, link-10M, link-100M, link-1000M
  634. port4 led1 is set to mode rule
  635. Custom rule for phy0123 applied using qca,led_rules
  636.  
  637. Custom rule for phy4 applied using qca,led_rules
  638.  
  639. Custom rule for phy0123 applied using qca,led_rules
  640.  
  641. Custom rule for phy4 applied using qca,led_rules
  642.  
  643. port1 led 0 is set to mode rule
  644. port1 led 1 is set to mode off
  645. port1 led 2 is set to mode off
  646. port2 led 0 is set to mode rule
  647. port2 led 1 is set to mode off
  648. port2 led 2 is set to mode off
  649. port3 led 0 is set to mode rule
  650. port3 led 1 is set to mode off
  651. port3 led 2 is set to mode off
  652. ######################END################################
  653. Found qca8k switch in ath79/qca9563_dlink_dir-859-a1.dts
  654. Conf for cpu port0, Mode sgmii, With qca,sgmii-rxclk-falling-edge
  655. Set qca,power-on-sel in switch node, Set qca,led-open-drain in switch node
  656. Custom rule for phy0123 applied using qca,led_rules, blink-auto, tx-blink, rx-blink, link-10M, link-100M, power-on-reset
  657. port0 led2 is set to mode rule
  658. Custom rule for phy4 applied using qca,led_rules, blink-auto, tx-blink, rx-blink, link-10M, link-100M, power-on-reset
  659. port4 led2 is set to mode rule
  660. Custom rule for phy0123 applied using qca,led_rules
  661.  
  662. Custom rule for phy4 applied using qca,led_rules
  663.  
  664. port1 led 0 is set to mode rule
  665. port1 led 1 is set to mode rule
  666. port1 led 2 is set to mode off
  667. port2 led 0 is set to mode rule
  668. port2 led 1 is set to mode rule
  669. port2 led 2 is set to mode off
  670. port3 led 0 is set to mode rule
  671. port3 led 1 is set to mode rule
  672. port3 led 2 is set to mode off
  673. ######################END################################
  674. Found qca8k switch in ath79/ar9344_netgear_wndr.dtsi
  675. Conf for cpu port0, Mode rgmii-id
  676. Conf for cpu port6, Mode rgmii-rxid
  677. !!MISSING TO CONVERT REMAINING BIT 0x40000000 FOR REG 0x10
  678. Set qca,power-on-sel in switch node, Set qca,led-open-drain in switch node
  679. Custom rule for phy0123 applied using qca,led_rules, blink-auto, tx-blink, rx-blink, link-10M, link-100M, power-on-reset
  680. port0 led2 is set to mode rule
  681. Custom rule for phy4 applied using qca,led_rules, blink-auto, tx-blink, rx-blink, link-10M, link-100M, power-on-reset
  682. port4 led2 is set to mode rule
  683. Custom rule for phy0123 applied using qca,led_rules
  684.  
  685. Custom rule for phy4 applied using qca,led_rules
  686.  
  687. port1 led 0 is set to mode rule
  688. port1 led 1 is set to mode rule
  689. port1 led 2 is set to mode off
  690. port2 led 0 is set to mode rule
  691. port2 led 1 is set to mode rule
  692. port2 led 2 is set to mode off
  693. port3 led 0 is set to mode rule
  694. port3 led 1 is set to mode rule
  695. port3 led 2 is set to mode off
  696. ######################END################################
  697. Found qca8k switch in ath79/qca9563_qxwlan_e1700ac.dtsi
  698. Conf for cpu port0, Mode sgmii, With qca,sgmii-rxclk-falling-edge
  699. ######################END################################
  700. Found qca8k switch in ath79/qca9558_belkin_f9x-v2.dtsi
  701. Conf for cpu port0, Mode sgmii, With qca,sgmii-rxclk-falling-edge
  702. Conf for cpu port6, Mode rgmii-id
  703. Custom rule for phy0123 applied using qca,led_rules, blink-auto, tx-blink, rx-blink, link-10M, link-100M, link-1000M
  704. port0 led1 is set to mode rule
  705. Custom rule for phy4 applied using qca,led_rules, blink-auto, tx-blink, rx-blink, link-10M, link-100M, link-1000M
  706. port4 led1 is set to mode rule
  707. Custom rule for phy0123 applied using qca,led_rules
  708.  
  709. Custom rule for phy4 applied using qca,led_rules
  710.  
  711. Custom rule for phy0123 applied using qca,led_rules
  712.  
  713. Custom rule for phy4 applied using qca,led_rules
  714.  
  715. port1 led 0 is set to mode rule
  716. port1 led 1 is set to mode off
  717. port1 led 2 is set to mode off
  718. port2 led 0 is set to mode rule
  719. port2 led 1 is set to mode off
  720. port2 led 2 is set to mode off
  721. port3 led 0 is set to mode rule
  722. port3 led 1 is set to mode off
  723. port3 led 2 is set to mode off
  724. ######################END################################
  725.  
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement
Public Pastes
Advertisement
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!