Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- Bytes transferred = 4941058 (4b6502 hex)
- LoadAddr=80a00000 NetBootFileXferSize= 004b6502
- Automatic boot of image at addr 0x80A00000 ...
- ## Booting image at 80a00000 ...
- Image Name: MIPS OpenWrt Linux-5.4.85
- Image Type: MIPS Linux Kernel Image (lzma compressed)
- Data Size: 4940994 Bytes = 4.7 MB
- Load Address: 80000000
- Entry Point: 80000000
- Verifying Checksum ... OK
- Uncompressing Kernel Image ... OK
- No initrd
- ## Transferring control to Linux (at address 80000000) ...
- ## Giving linux memsize in MB, 64
- Starting kernel ...
- [ 0.000000] Linux version 5.4.85 (X) (gcc version 8.4.0 (OpenWrt GCC 8.4.0 r15369-75900a25ed)) #0 Mon Dec 28 23:03:26 2020
- [ 0.000000] Board has DDR2
- [ 0.000000] Analog PMU set to hw control
- [ 0.000000] Digital PMU set to hw control
- [ 0.000000] SoC Type: MediaTek MT7620A ver:2 eco:6
- [ 0.000000] printk: bootconsole [early0] enabled
- [ 0.000000] CPU0 revision is: 00019650 (MIPS 24KEc)
- [ 0.000000] MIPS: machine is Wise Tiger RT-8501
- [ 0.000000] Initrd not found or empty - disabling initrd
- [ 0.000000] Primary instruction cache 64kB, VIPT, 4-way, linesize 32 bytes.
- [ 0.000000] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes
- [ 0.000000] Zone ranges:
- [ 0.000000] Normal [mem 0x0000000000000000-0x0000000003ffffff]
- [ 0.000000] Movable zone start for each node
- [ 0.000000] Early memory node ranges
- [ 0.000000] node 0: [mem 0x0000000000000000-0x0000000003ffffff]
- [ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x0000000003ffffff]
- [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 16240
- [ 0.000000] Kernel command line: console=ttyS1,57600 rootfstype=squashfs,jffs2
- [ 0.000000] Dentry cache hash table entries: 8192 (order: 3, 32768 bytes, linear)
- [ 0.000000] Inode-cache hash table entries: 4096 (order: 2, 16384 bytes, linear)
- [ 0.000000] Writing ErrCtl register=0001bb26
- [ 0.000000] Readback ErrCtl register=0001bb26
- [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
- [ 0.000000] Memory: 54624K/65536K available (4701K kernel code, 203K rwdata,1040K rodata, 4032K init, 205K bss, 10912K reserved, 0K cma-reserved)
- [ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
- [ 0.000000] NR_IRQS: 256
- [ 0.000000] random: get_random_bytes called from start_kernel+0x32c/0x520 with crng_init=0
- [ 0.000000] CPU Clock: 580MHz
- [ 0.000000] clocksource: systick: mask: 0xffff max_cycles: 0xffff, max_idle_ns: 583261500 ns
- [ 0.000000] systick: enable autosleep mode
- [ 0.000000] systick: running - mult: 214748, shift: 32
- [ 0.000000] clocksource: MIPS: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6590553264 ns
- [ 0.000010] sched_clock: 32 bits at 290MHz, resolution 3ns, wraps every 7405115902ns
- [ 0.015475] Calibrating delay loop... 385.02 BogoMIPS (lpj=770048)
- [ 0.059569] pid_max: default: 32768 minimum: 301
- [ 0.068960] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
- [ 0.083370] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
- [ 0.105643] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
- [ 0.124952] futex hash table entries: 256 (order: -1, 3072 bytes, linear)
- [ 0.138553] pinctrl core: initialized pinctrl subsystem
- [ 0.149451] NET: Registered protocol family 16
- [ 0.420507] PCI host bridge /pcie@10140000 ranges:
- [ 0.429907] MEM 0x0000000020000000..0x000000002fffffff
- [ 0.440275] IO 0x0000000010160000..0x000000001016ffff
- [ 0.473560] rt2880_gpio 10000600.gpio: registering 24 gpios
- [ 0.484622] rt2880_gpio 10000600.gpio: registering 24 irq handlers
- [ 0.497666] PCI host bridge to bus 0000:00
- [ 0.505719] pci_bus 0000:00: root bus resource [mem 0x20000000-0x2fffffff]
- [ 0.519336] pci_bus 0000:00: root bus resource [io 0xffffffff]
- [ 0.531106] pci_bus 0000:00: root bus resource [??? 0x00000000 flags 0x0]
- [ 0.544605] pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff]
- [ 0.560399] pci 0000:00:00.0: [1814:0801] type 01 class 0x060400
- [ 0.572331] pci 0000:00:00.0: reg 0x10: [mem 0x00000000-0x7fffffff]
- [ 0.584766] pci 0000:00:00.0: reg 0x14: [mem 0x00000000-0x0000ffff]
- [ 0.597307] pci 0000:00:00.0: supports D1
- [ 0.605184] pci 0000:00:00.0: PME# supported from D0 D1 D3hot
- [ 0.618700] pci 0000:00:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring
- [ 0.634736] pci 0000:01:00.0: [14c3:7662] type 00 class 0x028000
- [ 0.646635] pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x000fffff 64bit]
- [ 0.660088] pci 0000:01:00.0: reg 0x30: [mem 0x00000000-0x0000ffff pref]
- [ 0.673491] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold
- [ 0.687537] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01
- [ 0.700589] pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to 01
- [ 0.713740] pci 0000:00:00.0: BAR 0: no space for [mem size 0x80000000]
- [ 0.726861] pci 0000:00:00.0: BAR 0: failed to assign [mem size 0x80000000]
- [ 0.740710] pci 0000:00:00.0: BAR 8: assigned [mem 0x20000000-0x200fffff]
- [ 0.754210] pci 0000:00:00.0: BAR 9: assigned [mem 0x20100000-0x201fffff pref]
- [ 0.768574] pci 0000:00:00.0: BAR 1: assigned [mem 0x20200000-0x2020ffff]
- [ 0.782085] pci 0000:01:00.0: BAR 0: assigned [mem 0x20000000-0x200fffff 64bit]
- [ 0.796632] pci 0000:01:00.0: BAR 6: assigned [mem 0x20100000-0x2010ffff pref]
- [ 0.810975] pci 0000:00:00.0: PCI bridge to [bus 01]
- [ 0.820844] pci 0000:00:00.0: bridge window [mem 0x20000000-0x200fffff]
- [ 0.834339] pci 0000:00:00.0: bridge window [mem 0x20100000-0x201fffff pref]
- [ 0.848818] workqueue: max_active 576 requested for napi_workq is out of range, clamping between 1 and 512
- [ 0.872549] clocksource: Switched to clocksource systick
- [ 0.884403] NET: Registered protocol family 2
- [ 0.893868] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 4096 bytes, linear)
- [ 0.910444] TCP established hash table entries: 1024 (order: 0, 4096 bytes, linear)
- [ 0.925605] TCP bind hash table entries: 1024 (order: 0, 4096 bytes, linear)
- [ 0.939617] TCP: Hash tables configured (established 1024 bind 1024)
- [ 0.952398] UDP hash table entries: 256 (order: 0, 4096 bytes, linear)
- [ 0.965310] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes, linear)
- [ 0.979448] NET: Registered protocol family 1
- [ 0.988077] PCI: CLS 0 bytes, default 32
- [ 1.484529] random: fast init done
- [ 6.551173] rt-timer 10000100.timer: maximum frequency is 1220Hz
- [ 6.565262] workingset: timestamp_bits=14 max_order=14 bucket_order=0
- [ 6.586445] squashfs: version 4.0 (2009/01/31) Phillip Lougher
- [ 6.597958] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
- [ 6.634932] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled
- [ 6.648648] 10000500.uart: ttyS0 at MMIO 0x10000500 (irq = 13, base_baud = 2500000) is a Palmchip BK-3103
- [ 6.668343] 10000c00.uartlite: ttyS1 at MMIO 0x10000c00 (irq = 20, base_baud = 2500000) is a Palmchip BK-3103
- [ 6.688039] printk: console [ttyS1] enabled
- [ 6.688039] printk: console [ttyS1] enabled
- [ 6.704562] printk: bootconsole [early0] disabled
- [ 6.704562] printk: bootconsole [early0] disabled
- [ 6.729989] spi spi0.0: force spi mode3
- [ 6.738625] spi-nor spi0.0: mx25l6405d (8192 Kbytes)
- [ 6.748659] 5 fixed-partitions partitions found on MTD device spi0.0
- [ 6.761332] Creating 5 MTD partitions on "spi0.0":
- [ 6.770892] 0x000000000000-0x000000030000 : "Bootloader"
- [ 6.782547] 0x000000030000-0x000000040000 : "Config"
- [ 6.793537] 0x000000040000-0x000000050000 : "Factory"
- [ 6.804732] 0x000000050000-0x000000060000 : "params"
- [ 6.815651] 0x000000060000-0x000000800000 : "firmware"
- [ 6.827851] libphy: Fixed MDIO Bus: probed
- [ 6.848344] gsw: setting port4 to ephy mode
- [ 6.856779] mtk_soc_eth 10100000.ethernet eth0 (uninitialized): port 1 link up (100Mbps/Full duplex)
- [ 6.875061] mtk_soc_eth 10100000.ethernet: generated random MAC address 3a:92:97:e6:b7:e8
- [ 6.891584] mtk_soc_eth 10100000.ethernet: loaded mt7620 driver
- [ 6.904121] mtk_soc_eth 10100000.ethernet eth0: mediatek frame engine at 0xb0100000, irq 5
- [ 6.921146] rt2880_wdt 10000120.watchdog: Initialized
- [ 6.932759] NET: Registered protocol family 10
- [ 6.945842] Segment Routing with IPv6
- [ 6.953362] NET: Registered protocol family 17
- [ 6.962310] 8021q: 802.1Q VLAN Support v1.8
- [ 6.995033] Freeing unused kernel memory: 4032K
- [ 7.004093] This architecture does not have kernel memory protection.
- [ 7.016926] Run /init as init process
- [ 7.599578] init: Console is alive
- [ 7.606785] init: - watchdog -
- [ 7.638565] kmodloader: loading kernel modules from /etc/modules-boot.d/*
- [ 7.658417] kmodloader: done loading kernel modules from /etc/modules-boot.d/*
- [ 7.675768] init: - preinit -
- [ 7.936604] random: jshn: uninitialized urandom read (4 bytes read)
- [ 8.036063] random: jshn: uninitialized urandom read (4 bytes read)
- [ 8.071072] random: jshn: uninitialized urandom read (4 bytes read)
- [ 8.278670] 8021q: adding VLAN 0 to HW filter on device eth0
- Press the [f] key and hit [enter] to enter failsafe mode
- Press the [1], [2], [3] or [4] key and hit [enter] to select the debug level
- [ 8.882750] procd: - early -
- [ 8.888706] procd: - watchdog -
- [ 9.005074] procd: - watchdog -
- [ 9.011913] procd: - ubus -
- [ 9.027705] urandom_read: 6 callbacks suppressed
- [ 9.027714] random: ubusd: uninitialized urandom read (4 bytes read)
- [ 9.054675] procd: - init -
- Please press Enter to activate this console.
- [ 9.750483] kmodloader: loading kernel modules from /etc/modules.d/*
- [ 9.812935] Loading modules backported from Linux version v5.8.18-0-gab435ce49bd1
- [ 9.827879] Backport generated by backports.git v5.8.18-1-0-ga630fd46
- [ 9.914667] xt_time: kernel timezone is -0000
- [ 10.092917] PPP generic driver version 2.4.2
- [ 10.112962] NET: Registered protocol family 24
- [ 10.204683] urngd: jent-rng init failed, err: 2
- [ 10.219910] ieee80211 phy0: rt2x00lib_request_eeprom_file: Info - Loading EEPROM data from 'soc_wmac.eeprom'.
- [ 10.241173] rt2800_wmac 10180000.wmac: Direct firmware load for soc_wmac.eeprom failed with error -2
- [ 10.259445] rt2800_wmac 10180000.wmac: Falling back to sysfs fallback for: soc_wmac.eeprom
- [ 10.352380] ieee80211 phy0: rt2x00lib_request_eeprom_file: Error - Failed to request EEPROM.
- [ 10.369341] rt2800_wmac: probe of 10180000.wmac failed with error -12
- [ 10.410141] kmodloader: done loading kernel modules from /etc/modules.d/*
- [ 15.712712] random: crng init done
- BusyBox v1.31.1 () built-in shell (ash)
- _______ ________ __
- | |.-----.-----.-----.| | | |.----.| |_
- | - || _ | -__| || | | || _|| _|
- |_______|| __|_____|__|__||________||__| |____|
- |__| W I R E L E S S F R E E D O M
- -----------------------------------------------------
- OpenWrt SNAPSHOT, r15369-75900a25ed
- -----------------------------------------------------
- === WARNING! =====================================
- There is no root password defined on this device!
- Use the "passwd" command to set up a new password
- in order to prevent unauthorized SSH logins.
- --------------------------------------------------
- root@OpenWrt:/#
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement