evg2000 nothing special

CFE> f 192.168.1.2:DGND3700_06101913_A_D.chk
Loading 192.168.1.2:DGND3700_06101913_A_D.chk ...
Finished loading 8388608 bytes
Firmware tag version [0] is not compatible with the current Tag version [6].
*** command status = -1
CFE> b
Press:  <enter> to use current value
        '-' to go previous parameter
        '.' to clear the current value
        'x' to exit this command
96368VVW         ------- 0
96368MVWG        ------- 1
96368SV2         ------- 2
96369PVG         ------- 3
96368MBG         ------- 4
Board Id (0-4)                    :  3  1
Number of MAC Addresses (1-32)    :  11
Base MAC Address                  :  20:4e:7f:1d:27:a0
PSI Size (1-64) KBytes            :  24
Main Thread Number [0|1]          :  0

Resetting board...

EVG2000 Boot Code V1.0.6
CFE version 1.0.37-102.6 for BCM96368 (32bit,SP,BE)
Build Date: Fri Sep 25 11:21:49 CST 2009 (eric@dev3)
Copyright (C) 2000-2008 Broadcom Corporation.

Parallel flash device: name AM29LV320MT, id 0x2201, size 16384KB
CPU type 0x2A031: 400MHz, Bus: 160MHz, Ref: 64MHz
CPU running TP0
Total memory: 33554432 bytes (32MB)
Boot Address 0xb8000000


Board IP address                  : 192.168.1.1:ffffff00
Host IP address                   : 192.168.1.100
Gateway IP address                :
Run from flash/host (f/h)         : f
Default host run file name        : vmlinux
Default host flash file name      : bcm963xx_fs_kernel
Boot delay (0-9 seconds)          : 1
Board Id (0-4)                    : 96368MVWG
Number of MAC Addresses (1-32)    : 11
Base MAC Address                  : 20:4e:7f:1d:27:a0
PSI Size (1-64) KBytes            : 24
Main Thread Number [0|1]          : 0

*** Press any key to stop auto run (1 seconds) ***
Auto run second count down: 1
web info: Waiting for connection on socket 0.
CFE>
CFE>
CFE>
CFE>
CFE>
CFE>
CFE>
CFE>
CFE>
CFE> help
Available commands:

tftpd               Start TFTP server
sm                  Set memory or registers.
dm                  Dump memory or registers.
w                   Write the whole image start from beginning of the flash
e                   Erase [n]vram or [a]ll flash except bootrom
r                   Run program from flash image or from host depend on [f/h] flag
p                   Print boot line and board parameter info
c                   Change booline parameters
f                   Write image to the flash
i                   Erase persistent storage data
b                   Change board parameters
reset               Reset the board
flashimage          Flashes a compressed image after the bootloader.
ping                Ping a remote IP host.
arp                 Display or modify the ARP Table
ifconfig            Configure the Ethernet interface
help                Obtain help for CFE commands

For more information about a command, enter 'help command-name'
*** command status = 0
CFE> f
Loading 192.168.1.100:bcm963xx_fs_kernel ...
Loading failed.: CFE error -21
*** command status = -21
CFE> ^C
CFE> ^C
CFE>
CFE>
CFE>
CFE>
CFE> flashimage

     eg. flashimage [hostip:]compressed_image_file_name

*** command status = -2
CFE> p
Board IP address                  : 192.168.1.1:ffffff00
Host IP address                   : 192.168.1.100
Gateway IP address                :
Run from flash/host (f/h)         : f
Default host run file name        : vmlinux
Default host flash file name      : bcm963xx_fs_kernel
Boot delay (0-9 seconds)          : 1
Board Id (0-4)                    : 96368MVWG
Number of MAC Addresses (1-32)    : 11
Base MAC Address                  : 20:4e:7f:1d:27:a0
PSI Size (1-64) KBytes            : 24
Main Thread Number [0|1]          : 0

*** command status = 0
CFE>
CFE>
CFE> f 192.168.1.2:DGND3700_06101913_A_D.chk
Loading 192.168.1.2:DGND3700_06101913_A_D.chk ...
Finished loading 8388608 bytes
Firmware tag version [0] is not compatible with the current Tag version [6].
*** command status = -1
CFE>