RobertBerger

Untitled

Mar 12th, 2021
128
Never
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
  1. => setenv initrd_high '0xffffffff'
  2. => setenv kernel_addr_r '0x10007fc0'
  3. => setenv fdt_addr_r '0x18000000'
  4. => setenv ramdisk_addr_r '0x13000000'
  5. => setenv tftp_bootfile 'imx6q-phytec-mira-rdk-nand/uImage'
  6. => setenv fdt_file 'imx6q-phytec-mira-rdk-nand/uImage-imx6q-phytec-mira-rdk-nand.dtb'
  7. => setenv ramdisk_file 'imx6q-phytec-mira-rdk-nand/uRamdisk'
  8. => setenv bootcmd 'tftp ${kernel_addr_r} ${tftp_bootfile}; tftp ${ramdisk_addr_r} ${ramdisk_file}; tftp ${fdt_addr_r} ${fdt_file}; bootm ${kernel_addr_r} ${ramdisk_addr_r} ${fdt_addr_r}'
  9. => setenv bootargs 'console=ttymxc1,115200n8 ip=192.168.42.11:192.168.42.1:192.168.42.1:255.255.255.0::eth0: ramdisk_size=75536 root=/dev/ram rw'
  10. => setenv netup 'setenv ipaddr 192.168.42.11; setenv serverip 192.168.42.1; setenv netmask 255.255.255.0'
  11. => setenv loaduimage 'run netup; ping $serverip; boot'
  12. => run loaduimage
  13. Using ethernet@2188000 device
  14. host 192.168.42.1 is alive
  15. Using ethernet@2188000 device
  16. TFTP from server 192.168.42.1; our IP address is 192.168.42.11
  17. Filename 'imx6q-phytec-mira-rdk-nand/uImage'.
  18. Load address: 0x10007fc0
  19. Loading: #################################################################
  20. #################################################################
  21. #################################################################
  22. #################################################################
  23. #################################################################
  24. #################################################################
  25. #################################################################
  26. #################################################################
  27. #################################################################
  28. #################################################################
  29. #################################################################
  30. #################################################################
  31. #################################################################
  32. #####################
  33. 6.9 MiB/s
  34. done
  35. Bytes transferred = 12702272 (c1d240 hex)
  36. Using ethernet@2188000 device
  37. TFTP from server 192.168.42.1; our IP address is 192.168.42.11
  38. Filename 'imx6q-phytec-mira-rdk-nand/uRamdisk'.
  39. Load address: 0x13000000
  40. Loading: #################################################################
  41. #################################################################
  42. #################################################################
  43. #################################################################
  44. #################################################################
  45. #################################################################
  46. #################################################################
  47. #################################################################
  48. #################################################################
  49. #################################################################
  50. #################################################################
  51. #################################################################
  52. #################################################################
  53. #################################################################
  54. #################################################################
  55. #################################################################
  56. #################################################################
  57. #################################################################
  58. #################################################################
  59. #################################################################
  60. #################################################################
  61. #################################################################
  62. #################################################################
  63. #################################################################
  64. #################################################################
  65. #################################################################
  66. #################################################################
  67. #################################################################
  68. #################################################################
  69. #########
  70. 6.3 MiB/s
  71. done
  72. Bytes transferred = 27791708 (1a8115c hex)
  73. Using ethernet@2188000 device
  74. TFTP from server 192.168.42.1; our IP address is 192.168.42.11
  75. Filename 'imx6q-phytec-mira-rdk-nand/uImage-imx6q-phytec-mira-rdk-nand.dtb'.
  76. Load address: 0x18000000
  77. Loading: ###
  78. 3.9 MiB/s
  79. done
  80. Bytes transferred = 41325 (a16d hex)
  81. ## Booting kernel from Legacy Image at 10007fc0 ...
  82. Image Name: Linux-5.10.17-custom-student-deb
  83. Image Type: ARM Linux Kernel Image (no loading done) (uncompressed)
  84. Data Size: 12702208 Bytes = 12.1 MiB
  85. Load Address: 00000000
  86. Entry Point: 00000000
  87. Verifying Checksum ... OK
  88. ## Loading init Ramdisk from Legacy Image at 13000000 ...
  89. Image Name: Test Ramdisk Image
  90. Image Type: ARM Linux RAMDisk Image (gzip compressed)
  91. Data Size: 27791644 Bytes = 26.5 MiB
  92. Load Address: 00000000
  93. Entry Point: 00000000
  94. Verifying Checksum ... OK
  95. ## Flattened Device Tree blob at 18000000
  96. Booting using the fdt blob at 0x18000000
  97. XIP Kernel Image (no loading done)
  98. Using Device Tree in place at 18000000, end 1800d16c
  99.  
  100. Starting kernel ...
  101.  
  102. [ 0.000000] Booting Linux on physical CPU 0x0
  103. [ 0.000000] Linux version 5.10.17-custom-student-debug-00001-gd5741bc06cb6 (student@e450-tr1) (arm-resy-linux-gnueabi-gcc (GCC) 10.2.0, GNU ld (GNU Binutils) 2.35.0.20200730) #1 SMP Thu Mar 11 18:11:30 EET 2021
  104. [ 0.000000] CPU: ARMv7 Processor [412fc09a] revision 10 (ARMv7), cr=10c5387d
  105. [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
  106. [ 0.000000] OF: fdt: Machine model: PHYTEC phyBOARD-Mira Quad Carrier-Board with NAND
  107. [ 0.000000] Memory policy: Data cache writealloc
  108. [ 0.000000] efi: UEFI not found.
  109. [ 0.000000] cma: Reserved 64 MiB at 0x4c000000
  110. [ 0.000000] Zone ranges:
  111. [ 0.000000] DMA [mem 0x0000000010000000-0x000000003fffffff]
  112. [ 0.000000] Normal empty
  113. [ 0.000000] HighMem [mem 0x0000000040000000-0x000000004fffffff]
  114. [ 0.000000] Movable zone start for each node
  115. [ 0.000000] Early memory node ranges
  116. [ 0.000000] node 0: [mem 0x0000000010000000-0x000000004fffffff]
  117. [ 0.000000] Initmem setup node 0 [mem 0x0000000010000000-0x000000004fffffff]
  118. [ 0.000000] percpu: Embedded 381 pages/cpu s1530676 r8192 d21708 u1560576
  119. [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 260608
  120. [ 0.000000] Kernel command line: console=ttymxc1,115200n8 ip=192.168.42.11:192.168.42.1:192.168.42.1:255.255.255.0::eth0: ramdisk_size=75536 root=/dev/ram rw
  121. [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes, linear)
  122. [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes, linear)
  123. [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
  124. [ 0.000000] Memory: 899928K/1048576K available (17408K kernel code, 2722K rwdata, 8224K rodata, 4096K init, 7242K bss, 83112K reserved, 65536K cma-reserved, 196608K highmem)
  125. [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
  126. [ 0.000000] ftrace: allocating 55562 entries in 109 pages
  127. [ 0.000000] ftrace: allocated 109 pages with 5 groups
  128. [ 0.000000] Running RCU self tests
  129. [ 0.000000] rcu: Hierarchical RCU implementation.
  130. [ 0.000000] rcu: RCU event tracing is enabled.
  131. [ 0.000000] rcu: RCU lockdep checking is enabled.
  132. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=16 to nr_cpu_ids=4.
  133. [ 0.000000] Rude variant of Tasks RCU enabled.
  134. [ 0.000000] Tracing variant of Tasks RCU enabled.
  135. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
  136. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
  137. [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
  138. [ 0.000000] L2C-310 errata 752271 769419 enabled
  139. [ 0.000000] L2C-310 enabling early BRESP for Cortex-A9
  140. [ 0.000000] L2C-310 full line of zeros enabled for Cortex-A9
  141. [ 0.000000] L2C-310 ID prefetch enabled, offset 16 lines
  142. [ 0.000000] L2C-310 dynamic clock gating enabled, standby mode enabled
  143. [ 0.000000] L2C-310 cache controller enabled, 16 ways, 1024 kB
  144. [ 0.000000] L2C-310: CACHE_ID 0x410000c7, AUX_CTRL 0x76470001
  145. [ 0.000000] random: get_random_bytes called from start_kernel+0x3dc/0x5a0 with crng_init=0
  146. [ 0.000000] Switching to timer-based delay loop, resolution 333ns
  147. [ 0.000010] sched_clock: 32 bits at 3000kHz, resolution 333ns, wraps every 715827882841ns
  148. [ 0.000060] clocksource: mxc_timer1: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 637086815595 ns
  149. [ 0.004505] Console: colour dummy device 80x30
  150. [ 0.004591] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar
  151. [ 0.004639] ... MAX_LOCKDEP_SUBCLASSES: 8
  152. [ 0.004683] ... MAX_LOCK_DEPTH: 48
  153. [ 0.004726] ... MAX_LOCKDEP_KEYS: 8192
  154. [ 0.004769] ... CLASSHASH_SIZE: 4096
  155. [ 0.004812] ... MAX_LOCKDEP_ENTRIES: 32768
  156. [ 0.004853] ... MAX_LOCKDEP_CHAINS: 65536
  157. [ 0.004895] ... CHAINHASH_SIZE: 32768
  158. [ 0.004937] memory used by lock dependency info: 4317 kB
  159. [ 0.004981] memory used for stack traces: 2112 kB
  160. [ 0.005024] per task-struct memory footprint: 2304 bytes
  161. [ 0.005157] Calibrating delay loop (skipped), value calculated using timer frequency.. 6.00 BogoMIPS (lpj=30000)
  162. [ 0.005236] pid_max: default: 32768 minimum: 301
  163. [ 0.006045] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes, linear)
  164. [ 0.006120] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes, linear)
  165. [ 0.009496] CPU: Testing write buffer coherency: ok
  166. [ 0.009665] CPU0: Spectre v2: using BPIALL workaround
  167. [ 0.011019] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
  168. [ 0.016769] Setting up static identity map for 0x10300000 - 0x103000ac
  169. [ 0.019683] rcu: Hierarchical SRCU implementation.
  170. [ 0.033266] EFI services will not be available.
  171. [ 0.035200] smp: Bringing up secondary CPUs ...
  172. [ 0.040129] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
  173. [ 0.040152] CPU1: Spectre v2: using BPIALL workaround
  174. [ 0.046283] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
  175. [ 0.046305] CPU2: Spectre v2: using BPIALL workaround
  176. [ 0.052430] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
  177. [ 0.052452] CPU3: Spectre v2: using BPIALL workaround
  178. [ 0.053938] smp: Brought up 1 node, 4 CPUs
  179. [ 0.054007] SMP: Total of 4 processors activated (24.00 BogoMIPS).
  180. [ 0.054067] CPU: All CPU(s) started in SVC mode.
  181. [ 0.057775] devtmpfs: initialized
  182. [ 0.153894] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
  183. [ 0.157974] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
  184. [ 0.158082] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
  185. [ 0.163103] pinctrl core: initialized pinctrl subsystem
  186. [ 0.173457] DMI not present or invalid.
  187. [ 0.175673] NET: Registered protocol family 16
  188. [ 0.192530] DMA: preallocated 256 KiB pool for atomic coherent allocations
  189. [ 0.207769] thermal_sys: Registered thermal governor 'step_wise'
  190. [ 0.208502] cpuidle: using governor menu
  191. [ 0.209368] CPU identified as i.MX6Q, silicon rev 1.5
  192. [ 1.165001] vdd1p1: supplied by regulator-dummy
  193. [ 1.211426] vdd3p0: supplied by regulator-dummy
  194. [ 1.257240] vdd2p5: supplied by regulator-dummy
  195. [ 3.226225] No ATAGs?
  196. [ 3.227508] hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers.
  197. [ 3.227624] hw-breakpoint: maximum watchpoint size is 4 bytes.
  198. [ 3.250488] debugfs: Directory 'dummy-iomuxc-gpr@20e0000' with parent 'regmap' already present!
  199. [ 3.254000] imx6q-pinctrl 20e0000.pinctrl: initialized IMX pinctrl driver
  200. [ 3.294946] Serial: AMBA PL011 UART driver
  201. [ 3.598788] raid6: neonx8 gen() 494 MB/s
  202. [ 3.768743] raid6: neonx8 xor() 396 MB/s
  203. [ 3.938738] raid6: neonx4 gen() 1215 MB/s
  204. [ 4.108744] raid6: neonx4 xor() 789 MB/s
  205. [ 4.278749] raid6: neonx2 gen() 1130 MB/s
  206. [ 4.448737] raid6: neonx2 xor() 759 MB/s
  207. [ 4.618758] raid6: neonx1 gen() 1007 MB/s
  208. [ 4.788742] raid6: neonx1 xor() 687 MB/s
  209. [ 4.958817] raid6: int32x8 gen() 230 MB/s
  210. [ 5.128775] raid6: int32x8 xor() 150 MB/s
  211. [ 5.298779] raid6: int32x4 gen() 249 MB/s
  212. [ 5.468773] raid6: int32x4 xor() 160 MB/s
  213. [ 5.638770] raid6: int32x2 gen() 314 MB/s
  214. [ 5.808796] raid6: int32x2 xor() 158 MB/s
  215. [ 5.978744] raid6: int32x1 gen() 323 MB/s
  216. [ 6.148757] raid6: int32x1 xor() 140 MB/s
  217. [ 6.148821] raid6: using algorithm neonx4 gen() 1215 MB/s
  218. [ 6.148878] raid6: .... xor() 789 MB/s, rmw enabled
  219. [ 6.148934] raid6: using neon recovery algorithm
  220. [ 6.284164] mxs-dma 110000.dma-apbh: initialized
  221. [ 6.332906] iommu: Default domain type: Translated
  222. [ 6.335474] vgaarb: loaded
  223. [ 6.342828] SCSI subsystem initialized
  224. [ 6.346104] usbcore: registered new interface driver usbfs
  225. [ 6.346695] usbcore: registered new interface driver hub
  226. [ 6.347092] usbcore: registered new device driver usb
  227. [ 6.370130] i2c i2c-0: IMX I2C adapter registered
  228. [ 6.374769] i2c i2c-1: IMX I2C adapter registered
  229. [ 6.407953] i2c i2c-2: IMX I2C adapter registered
  230. [ 6.414756] pps_core: LinuxPPS API ver. 1 registered
  231. [ 6.414823] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
  232. [ 6.414976] PTP clock support registered
  233. [ 6.437479] clocksource: Switched to clocksource mxc_timer1
  234. [ 8.721909] NET: Registered protocol family 2
  235. [ 8.726410] tcp_listen_portaddr_hash hash table entries: 512 (order: 2, 26624 bytes, linear)
  236. [ 8.726613] TCP established hash table entries: 8192 (order: 3, 32768 bytes, linear)
  237. [ 8.726856] TCP bind hash table entries: 8192 (order: 6, 393216 bytes, linear)
  238. [ 8.728390] TCP: Hash tables configured (established 8192 bind 8192)
  239. [ 8.729226] UDP hash table entries: 512 (order: 3, 57344 bytes, linear)
  240. [ 8.729531] UDP-Lite hash table entries: 512 (order: 3, 57344 bytes, linear)
  241. [ 8.730773] NET: Registered protocol family 1
  242. [ 8.734873] RPC: Registered named UNIX socket transport module.
  243. [ 8.734994] RPC: Registered udp transport module.
  244. [ 8.735065] RPC: Registered tcp transport module.
  245. [ 8.735130] RPC: Registered tcp NFSv4.1 backchannel transport module.
  246. [ 8.735208] PCI: CLS 0 bytes, default 64
  247. [ 8.739177] Trying to unpack rootfs image as initramfs...
  248. [ 8.740989] rootfs image is not initramfs (no cpio magic); looks like an initrd
  249. [ 9.262577] Freeing initrd memory: 27144K
  250. [ 9.263867] hw perfevents: no interrupt-affinity property for /pmu, guessing.
  251. [ 9.265708] hw perfevents: enabled with armv7_cortex_a9 PMU driver, 7 counters available
  252. [ 9.280198] Initialise system trusted keyrings
  253. [ 9.281562] workingset: timestamp_bits=30 max_order=18 bucket_order=0
  254. [ 9.368055] squashfs: version 4.0 (2009/01/31) Phillip Lougher
  255. [ 9.375557] NFS: Registering the id_resolver key type
  256. [ 9.375793] Key type id_resolver registered
  257. [ 9.375915] Key type id_legacy registered
  258. [ 9.377064] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
  259. [ 9.377578] ntfs: driver 2.1.32 [Flags: R/O].
  260. [ 9.383037] xor: measuring software checksum speed
  261. [ 9.391155] arm4regs : 1253 MB/sec
  262. [ 9.401127] 8regs : 1009 MB/sec
  263. [ 9.411429] 32regs : 971 MB/sec
  264. [ 9.422021] neon : 942 MB/sec
  265. [ 9.422080] xor: using function: arm4regs (1253 MB/sec)
  266. [ 9.422160] Key type asymmetric registered
  267. [ 9.422318] Asymmetric key parser 'x509' registered
  268. [ 9.422933] bounce: pool size: 64 pages
  269. [ 9.423184] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
  270. [ 9.423322] io scheduler mq-deadline registered
  271. [ 9.423392] io scheduler kyber registered
  272. [ 9.753914] imx-sdma 20ec000.sdma: Direct firmware load for imx/sdma/sdma-imx6q.bin failed with error -2
  273. [ 9.754148] imx-sdma 20ec000.sdma: external firmware not found, using ROM firmware
  274. [ 10.194087] Serial: 8250/16550 driver, 5 ports, IRQ sharing enabled
  275. [ 10.225699] SuperH (H)SCI(F) driver initialized
  276. [ 10.230511] 21e8000.serial: ttymxc1 at MMIO 0x21e8000 (irq = 75, base_baud = 5000000) is a IMX
  277. [ 11.228624] printk: console [ttymxc1] enabled
  278. [ 11.240207] 21ec000.serial: ttymxc2 at MMIO 0x21ec000 (irq = 76, base_baud = 5000000) is a IMX
  279. [ 11.258773] msm_serial: driver initialized
  280. [ 11.264374] STMicroelectronics ASC driver initialized
  281. [ 11.278582] STM32 USART driver initialized
  282. [ 11.332377] panel-simple panel: Specify missing connector_type
  283. [ 11.417082] brd: module loaded
  284. [ 11.519349] loop: module loaded
  285. [ 11.524996] at24 2-0050: supply vcc not found, using dummy regulator
  286. [ 11.535982] at24 2-0050: 4096 byte 24c32 EEPROM, writable, 1 bytes/write
  287. [ 11.593028] nand: device found, Manufacturer ID: 0xef, Chip ID: 0xd3
  288. [ 11.599617] nand: Winbond W29N08GV
  289. [ 11.603087] nand: 1024 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64
  290. [ 11.613050] Bad block table found at page 524224, version 0x01
  291. [ 11.619624] Bad block table found at page 524160, version 0x01
  292. [ 11.644604] gpmi-nand 112000.nand-controller: driver registered.
  293. [ 11.698914] libphy: Fixed MDIO Bus: probed
  294. [ 11.716860] CAN device driver interface
  295. [ 11.726658] bgmac_bcma: Broadcom 47xx GBit MAC driver loaded
  296. [ 11.743862] pps pps0: new PPS source ptp0
  297. [ 11.756838] libphy: fec_enet_mii_bus: probed
  298. [ 11.773489] fec 2188000.ethernet eth0: registered PHC device 0
  299. [ 11.786667] e1000e: Intel(R) PRO/1000 Network Driver
  300. [ 11.791815] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
  301. [ 11.798371] igb: Intel(R) Gigabit Ethernet Network Driver
  302. [ 11.803835] igb: Copyright (c) 2007-2014 Intel Corporation.
  303. [ 11.840285] pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethernet driver
  304. [ 11.848114] usbcore: registered new interface driver pegasus
  305. [ 11.854213] usbcore: registered new interface driver asix
  306. [ 11.860015] usbcore: registered new interface driver ax88179_178a
  307. [ 11.866403] usbcore: registered new interface driver cdc_ether
  308. [ 11.872756] usbcore: registered new interface driver smsc75xx
  309. [ 11.879055] usbcore: registered new interface driver smsc95xx
  310. [ 11.885116] usbcore: registered new interface driver net1080
  311. [ 11.891178] usbcore: registered new interface driver cdc_subset
  312. [ 11.897506] usbcore: registered new interface driver zaurus
  313. [ 11.903525] usbcore: registered new interface driver cdc_ncm
  314. [ 11.927050] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  315. [ 11.933872] ehci-pci: EHCI PCI platform driver
  316. [ 11.938728] ehci-platform: EHCI generic platform driver
  317. [ 11.945394] ehci-orion: EHCI orion driver
  318. [ 11.950859] SPEAr-ehci: EHCI SPEAr driver
  319. [ 11.956167] ehci-st: EHCI STMicroelectronics driver
  320. [ 11.962439] ehci-exynos: EHCI Exynos driver
  321. [ 11.967999] ehci-atmel: EHCI Atmel driver
  322. [ 11.973288] tegra-ehci: Tegra EHCI driver
  323. [ 11.978725] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
  324. [ 11.985077] ohci-pci: OHCI PCI platform driver
  325. [ 11.989938] ohci-platform: OHCI generic platform driver
  326. [ 11.996542] SPEAr-ohci: OHCI SPEAr driver
  327. [ 12.001991] ohci-st: OHCI STMicroelectronics driver
  328. [ 12.008283] ohci-atmel: OHCI Atmel driver
  329. [ 12.017125] usbcore: registered new interface driver usb-storage
  330. [ 12.070251] i2c /dev entries driver
  331. [ 12.193583] sdhci: Secure Digital Host Controller Interface driver
  332. [ 12.199943] sdhci: Copyright(c) Pierre Ossman
  333. [ 12.217677] Synopsys Designware Multimedia Card Interface Driver
  334. [ 12.234136] sdhci-pltfm: SDHCI platform and OF driver helper
  335. [ 12.245369] sdhci-esdhc-imx 2190000.mmc: Got CD GPIO
  336. [ 12.266333] ledtrig-cpu: registered to indicate activity on CPUs
  337. [ 12.278254] usbcore: registered new interface driver usbhid
  338. [ 12.283894] usbhid: USB HID core driver
  339. [ 12.309261] mmc0: SDHCI controller on 2190000.mmc [2190000.mmc] using ADMA
  340. [ 12.326296] NET: Registered protocol family 10
  341. [ 12.338227] Segment Routing with IPv6
  342. [ 12.342222] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
  343. [ 12.353415] NET: Registered protocol family 17
  344. [ 12.357962] mmc0: host does not support reading read-only switch, assuming write-enable
  345. [ 12.360657] mmc0: new high speed SDHC card at address 1234
  346. [ 12.366299] can: controller area network core
  347. [ 12.376794] NET: Registered protocol family 29
  348. [ 12.377494] mmcblk0: mmc0:1234 SA08G 7.21 GiB
  349. [ 12.381429] can: raw protocol
  350. [ 12.389159] can: broadcast manager protocol
  351. [ 12.393517] can: netlink gateway - max_hops=1
  352. [ 12.401201] Key type dns_resolver registered
  353. [ 12.404321] mmcblk0: p1 p2 p3
  354. [ 12.419415] ThumbEE CPU extension supported.
  355. [ 12.423801] Registering SWP/SWPB emulation handler
  356. [ 12.430797] registered taskstats version 1
  357. [ 12.435034] Loading compiled-in X.509 certificates
  358. [ 12.461077] Btrfs loaded, crc32c=crc32c-generic
  359. [ 12.824837] panel-simple panel: Specify missing connector_type
  360. [ 12.894092] ci_hdrc ci_hdrc.1: EHCI Host Controller
  361. [ 12.899692] ci_hdrc ci_hdrc.1: new USB bus registered, assigned bus number 1
  362. [ 12.937660] ci_hdrc ci_hdrc.1: USB 2.0 started, EHCI 1.00
  363. [ 12.954431] hub 1-0:1.0: USB hub found
  364. [ 12.959115] hub 1-0:1.0: 1 port detected
  365. [ 13.031257] panel-simple panel: Specify missing connector_type
  366. [ 13.102631] panel-simple panel: Specify missing connector_type
  367. [ 13.212616] Micrel KSZ9031 Gigabit PHY 2188000.ethernet-1:03: attached PHY driver [Micrel KSZ9031 Gigabit PHY] (mii_bus:phy_addr=2188000.ethernet-1:03, irq=POLL)
  368. [ 20.488795] fec 2188000.ethernet eth0: Link is Up - 1Gbps/Full - flow control rx/tx
  369. [ 20.497231] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
  370. [ 20.517566] IP-Config: Complete:
  371. [ 20.520870] device=eth0, hwaddr=50:2d:f4:16:2d:bd, ipaddr=192.168.42.11, mask=255.255.255.0, gw=192.168.42.1
  372. [ 20.532586] host=192.168.42.11, domain=, nis-domain=(none)
  373. [ 20.538654] bootserver=192.168.42.1, rootserver=192.168.42.1, rootpath=
  374. [ 20.550537] RAMDISK: gzip image found at block 0
  375. [ 25.258755] EXT4-fs (ram0): mounting ext2 file system using the ext4 subsystem
  376. [ 25.276531] EXT4-fs (ram0): mounted filesystem without journal. Opts: (null)
  377. [ 25.285283] VFS: Mounted root (ext2 filesystem) on device 1:0.
  378. [ 25.295886] devtmpfs: mounted
  379. [ 25.384936] Freeing unused kernel memory: 4096K
  380. [ 25.391873] Run /sbin/init as init process
  381. INIT: version 2.98 booting
  382. Starting udev
  383. [ 26.376926] udevd[111]: starting version 3.2.9
  384. [ 26.387066] random: udevd: uninitialized urandom read (16 bytes read)
  385. [ 26.396140] random: udevd: uninitialized urandom read (16 bytes read)
  386. [ 26.403011] random: udevd: uninitialized urandom read (16 bytes read)
  387. [ 26.454095] udevd[112]: starting eudev-3.2.9
  388. [ 27.487907] urandom_read: 1 callbacks suppressed
  389. [ 27.487937] random: udevd: uninitialized urandom read (16 bytes read)
  390. [ 28.040368] random: fast init done
  391. [ 28.258497] BTRFS: device label cntdata devid 1 transid 42 /dev/mmcblk0p3 scanned by udevd (120)
  392. [ 29.378027] EXT4-fs (ram0): re-mounted. Opts: errors=remount-ro
  393. depmod: can't change directory to 'lib/modules/5.10.17-custom-student-debug-00001-gd5741bc06cb6': No such file or directory
  394. [ 31.608233] random: dd: uninitialized urandom read (512 bytes read)
  395.  
  396. Resy (Reliable Embedded Systems Reference Distro) 3.2.66 multi-v7-ml /dev/ttymxc1
  397.  
  398. multi-v7-ml login: root
  399. root@multi-v7-ml:~# cat /proc/cmdline
  400. console=ttymxc1,115200n8 ip=192.168.42.11:192.168.42.1:192.168.42.1:255.255.255.0::eth0: ramdisk_size=75536 root=/dev/ram rw
  401. root@multi-v7-ml:~# mount
  402. /dev/root on / type ext2 (rw,relatime,errors=remount-ro)
  403. devtmpfs on /dev type devtmpfs (rw,relatime,size=449964k,nr_inodes=112491,mode=755)
  404. proc on /proc type proc (rw,relatime)
  405. sysfs on /sys type sysfs (rw,relatime)
  406. debugfs on /sys/kernel/debug type debugfs (rw,relatime)
  407. configfs on /sys/kernel/config type configfs (rw,relatime)
  408. tmpfs on /run type tmpfs (rw,nosuid,nodev,mode=755)
  409. tmpfs on /var/volatile type tmpfs (rw,relatime)
  410. devpts on /dev/pts type devpts (rw,relatime,gid=5,mode=620,ptmxmode=000)
  411. root@multi-v7-ml:~# cat /proc/filesystems
  412. nodev sysfs
  413. nodev tmpfs
  414. nodev bdev
  415. nodev proc
  416. nodev cgroup
  417. nodev cgroup2
  418. nodev devtmpfs
  419. nodev configfs
  420. nodev debugfs
  421. nodev tracefs
  422. nodev securityfs
  423. nodev sockfs
  424. nodev bpf
  425. nodev pipefs
  426. nodev ramfs
  427. nodev rpc_pipefs
  428. nodev devpts
  429. ext3
  430. ext2
  431. ext4
  432. squashfs
  433. vfat
  434. msdos
  435. nodev nfs
  436. nodev nfs4
  437. ntfs
  438. nodev autofs
  439. nodev mqueue
  440. nodev ubifs
  441. btrfs
  442. nodev pstore
  443. root@multi-v7-ml:~#
  444.  
  445.  
RAW Paste Data