Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- Willkommen zu minicom 2.7.1
- Optionen: I18n
- Übersetzt am May 6 2018, 08:02:47.
- Port /dev/ttyUSB0, 16:49:04
- Drücken Sie CTRL-A Z für Hilfe zu speziellen Tasten
- U-Boot TPL 2020.01-ayufan-2011-g26eed9fd (Apr 09 2020 - 21:56:16)
- Channel 0: LPDDR4, 50MHz
- BW=32 Col=10 Bk=8 CS0 Row=15 CS=1 Die BW=16 Size=1024MB
- Channel 1: LPDDR4, 50MHz
- BW=32 Col=10 Bk=8 CS0 Row=15 CS=1 Die BW=16 Size=1024MB
- 256B stride
- 256B stride
- lpddr4_set_rate: change freq to 400000000 mhz 0, 1
- lpddr4_set_rate: change freq to 800000000 mhz 1, 0
- Trying to boot from BOOTROM
- Returning to boot ROM...
- U-Boot SPL 2020.01-ayufan-2011-g26eed9fd (Apr 09 2020 - 21:56:16 +0000)
- Trying to boot from SPI
- U-Boot 2020.01-ayufan-2011-g26eed9fd (Apr 09 2020 - 21:56:23 +0000)
- Model: Pine64 RockPro64
- DRAM: 2 GiB
- PMIC: RK808
- MMC: dwmmc@fe320000: 1, sdhci@fe330000: 0
- Loading Environment from MMC... Card did not respond to voltage select!
- *** Warning - No block device, using default environment
- In: serial
- Out: vidconsole
- Err: vidconsole
- Model: Pine64 RockPro64
- rockchip_dnl_key_pressed: adc_channel_single_shot fail!
- Net: eth0: ethernet@fe300000
- Hit any key to stop autoboot: 0
- Card did not respond to voltage select!
- switch to partitions #0, OK
- mmc1 is current device
- Scanning mmc 1:3...
- Found /extlinux/extlinux.conf
- Retrieving file: /extlinux/extlinux.conf
- 937 bytes read in 7 ms (129.9 KiB/s)
- select kernel
- 1: kernel-5.6.0-1134-ayufan-g652fb97d87eb
- 2: kernel-5.6.0-1134-ayufan-g652fb97d87eb-memtest
- Enter choice: 1: kernel-5.6.0-1134-ayufan-g652fb97d87eb
- Retrieving file: /initrd.img-5.6.0-1134-ayufan-g652fb97d87eb
- 13258588 bytes read in 569 ms (22.2 MiB/s)
- Retrieving file: /vmlinuz-5.6.0-1134-ayufan-g652fb97d87eb
- 22915584 bytes read in 976 ms (22.4 MiB/s)
- append: rw panic=10 init=/sbin/init coherent_pool=1M ethaddr=62:03:b0:d6:dc:b3 4
- Retrieving file: /dtbs/5.6.0-1134-ayufan-g652fb97d87eb/rockchip/rk3399-rockpro6b
- 56691 bytes read in 11 ms (4.9 MiB/s)
- ## Flattened Device Tree blob at 01f00000
- Booting using the fdt blob at 0x1f00000
- Loading Ramdisk to 79262000, end 79f06f5c ... OK
- Loading Device Tree to 0000000079251000, end 0000000079261d72 ... OK
- Starting kernel ...
- [ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd034]
- [ 0.000000] Linux version 5.6.0-1134-ayufan-g652fb97d87eb (root@runner-f725f0
- [ 0.000000] Machine model: Pine64 RockPro64 v2.1
- [ 0.000000] efi: Getting EFI parameters from FDT:
- [ 0.000000] efi: UEFI not found.
- [ 0.000000] cma: Reserved 64 MiB at 0x000000007c000000
- [ 0.000000] psci: probing for conduit method from DT.
- [ 0.000000] psci: PSCIv1.1 detected in firmware.
- [ 0.000000] psci: Using standard PSCI v0.2 function IDs
- [ 0.000000] psci: MIGRATE_INFO_TYPE not supported.
- [ 0.000000] psci: SMC Calling Convention v1.0
- [ 0.000000] percpu: Embedded 34 pages/cpu s101272 r8192 d29800 u139264
- [ 0.000000] Detected VIPT I-cache on CPU0
- [ 0.000000] CPU features: detected: ARM erratum 845719
- [ 0.000000] CPU features: detected: GIC system register CPU interface
- [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 515592
- [ 0.000000] Kernel command line: rw panic=10 init=/sbin/init coherent_pool=14
- [ 0.000000] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
- [ 0.000000] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes,)
- [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
- [ 0.000000] software IO TLB: mapped [mem 0x3bfff000-0x3ffff000] (64MB)
- [ 0.000000] Memory: 1878640K/2095104K available (14012K kernel code, 1130K r)
- [ 0.000000] random: get_random_u64 called from cache_random_seq_create+0x84/0
- [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1
- [ 0.000000] rcu: Hierarchical RCU implementation.
- [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=6.
- [ 0.000000] Tasks RCU enabled.
- [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 ji.
- [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=6
- [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
- [ 0.000000] GICv3: GIC: Using split EOI/Deactivate mode
- [ 0.000000] GICv3: 256 SPIs implemented
- [ 0.000000] GICv3: 0 Extended SPIs implemented
- [ 0.000000] GICv3: Distributor has no Range Selector support
- [ 0.000000] GICv3: 16 PPIs implemented
- [ 0.000000] GICv3: no VLPI support, no direct LPI support, no RVPEID support
- [ 0.000000] GICv3: CPU0: found redistributor 0 region 0:0x00000000fef00000
- [ 0.000000] ITS [mem 0xfee20000-0xfee3ffff]
- [ 0.000000] ITS@0x00000000fee20000: allocated 65536 Devices @7b080000 (flat,)
- [ 0.000000] ITS: using cache flushing for cmd queue
- [ 0.000000] GICv3: using LPI property table @0x000000007b040000
- [ 0.000000] GIC: using cache flushing for LPI property table
- [ 0.000000] GICv3: CPU0: using allocated LPI pending table @0x000000007b05000
- [ 0.000000] GICv3: GIC: PPI partition interrupt-partition-0[0] { /cpus/cpu@0}
- [ 0.000000] GICv3: GIC: PPI partition interrupt-partition-1[1] { /cpus/cpu@1}
- [ 0.000000] arch_timer: cp15 timer(s) running at 24.00MHz (phys).
- [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycless
- [ 0.000007] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398s
- [ 0.001437] Console: colour dummy device 80x25
- [ 0.002039] printk: console [tty0] enabled
- [ 0.002097] Calibrating delay loop (skipped), value calculated using timer f)
- [ 0.002128] pid_max: default: 32768 minimum: 301
- [ 0.002383] LSM: Security Framework initializing
- [ 0.002416] Yama: becoming mindful.
- [ 0.002531] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes, lin)
- [ 0.002567] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes)
- [ 0.002664] *** VALIDATE tmpfs ***
- [ 0.003380] *** VALIDATE proc ***
- [ 0.003726] *** VALIDATE cgroup ***
- [ 0.003746] *** VALIDATE cgroup2 ***
- [ 0.005120] rcu: Hierarchical SRCU implementation.
- [ 0.007674] Platform MSI: interrupt-controller@fee20000 domain created
- [ 0.008115] PCI/MSI: /interrupt-controller@fee00000/interrupt-controller@feed
- [ 0.008861] EFI services will not be available.
- [ 0.009533] smp: Bringing up secondary CPUs ...
- [ 0.010297] Detected VIPT I-cache on CPU1
- [ 0.010337] GICv3: CPU1: found redistributor 1 region 0:0x00000000fef20000
- [ 0.010352] GICv3: CPU1: using allocated LPI pending table @0x000000007b06000
- [ 0.010403] CPU1: Booted secondary processor 0x0000000001 [0x410fd034]
- [ 0.011178] Detected VIPT I-cache on CPU2
- [ 0.011207] GICv3: CPU2: found redistributor 2 region 0:0x00000000fef40000
- [ 0.011220] GICv3: CPU2: using allocated LPI pending table @0x000000007b07000
- [ 0.011252] CPU2: Booted secondary processor 0x0000000002 [0x410fd034]
- [ 0.011938] Detected VIPT I-cache on CPU3
- [ 0.011966] GICv3: CPU3: found redistributor 3 region 0:0x00000000fef60000
- [ 0.011979] GICv3: CPU3: using allocated LPI pending table @0x000000007b10000
- [ 0.012008] CPU3: Booted secondary processor 0x0000000003 [0x410fd034]
- [ 0.012709] CPU features: detected: EL2 vector hardening
- [ 0.012719] ARM_SMCCC_ARCH_WORKAROUND_1 missing from firmware
- [ 0.012726] CPU features: detected: ARM erratum 1319367
- [ 0.012731] Detected PIPT I-cache on CPU4
- [ 0.012766] GICv3: CPU4: found redistributor 100 region 0:0x00000000fef80000
- [ 0.012778] GICv3: CPU4: using allocated LPI pending table @0x000000007b11000
- [ 0.012813] CPU4: Booted secondary processor 0x0000000100 [0x410fd082]
- [ 0.013555] Detected PIPT I-cache on CPU5
- [ 0.013580] GICv3: CPU5: found redistributor 101 region 0:0x00000000fefa0000
- [ 0.013592] GICv3: CPU5: using allocated LPI pending table @0x000000007b12000
- [ 0.013620] CPU5: Booted secondary processor 0x0000000101 [0x410fd082]
- [ 0.013732] smp: Brought up 1 node, 6 CPUs
- [ 0.014027] SMP: Total of 6 processors activated.
- [ 0.014044] CPU features: detected: 32-bit EL0 Support
- [ 0.014060] CPU features: detected: CRC32 instructions
- [ 0.047868] CPU: All CPU(s) started at EL2
- [ 0.047962] alternatives: patching kernel code
- [ 0.050871] devtmpfs: initialized
- [ 0.062504] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, ms
- [ 0.062549] futex hash table entries: 2048 (order: 5, 131072 bytes, linear)
- [ 0.065886] pinctrl core: initialized pinctrl subsystem
- [ 0.066951] thermal_sys: Registered thermal governor 'fair_share'
- [ 0.066956] thermal_sys: Registered thermal governor 'bang_bang'
- [ 0.066980] thermal_sys: Registered thermal governor 'step_wise'
- [ 0.066997] thermal_sys: Registered thermal governor 'user_space'
- [ 0.067013] thermal_sys: Registered thermal governor 'power_allocator'
- [ 0.067669] DMI not present or invalid.
- [ 0.068547] NET: Registered protocol family 16
- [ 0.071474] DMA: preallocated 1024 KiB pool for atomic allocations
- [ 0.072707] cpuidle: using governor ladder
- [ 0.072758] cpuidle: using governor menu
- [ 0.073223] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
- [ 0.073416] ASID allocator initialised with 65536 entries
- [ 0.073559] Serial: AMBA PL011 UART driver
- [ 0.110012] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
- [ 0.110036] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages
- [ 0.110050] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
- [ 0.110064] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages
- [ 1.552732] cryptd: max_cpu_qlen set to 1000
- [ 1.584513] ACPI: Interpreter disabled.
- [ 1.586092] vcc3v3_pcie: supplied by vcc12v_dcin
- [ 1.587757] vcc5v0_sys: supplied by vcc12v_dcin
- [ 1.588132] vcc5v0_usb: supplied by vcc12v_dcin
- [ 1.588343] vcc3v3_sys: supplied by vcc5v0_sys
- [ 1.589022] iommu: Default domain type: Translated
- [ 1.591495] vgaarb: loaded
- [ 1.592726] SCSI subsystem initialized
- [ 1.593188] usbcore: registered new interface driver usbfs
- [ 1.593242] usbcore: registered new interface driver hub
- [ 1.593334] usbcore: registered new device driver usb
- [ 1.593932] mc: Linux media interface: v0.10
- [ 1.593966] videodev: Linux video capture interface: v2.00
- [ 1.594028] pps_core: LinuxPPS API ver. 1 registered
- [ 1.594041] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giom>
- [ 1.594064] PTP clock support registered
- [ 1.594291] EDAC MC: Ver: 3.0.0
- [ 1.595064] Advanced Linux Sound Architecture Driver Initialized.
- [ 1.595535] NetLabel: Initializing
- [ 1.595549] NetLabel: domain hash size = 128
- [ 1.595558] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
- [ 1.595625] NetLabel: unlabeled traffic allowed by default
- [ 1.596148] clocksource: Switched to clocksource arch_sys_counter
- [ 1.596167] *** VALIDATE bpf ***
- [ 1.596386] VFS: Disk quotas dquot_6.6.0
- [ 1.596461] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
- [ 1.596539] *** VALIDATE ramfs ***
- [ 1.596562] *** VALIDATE hugetlbfs ***
- [ 1.596975] pnp: PnP ACPI: disabled
- [ 1.603405] NET: Registered protocol family 2
- [ 1.604130] tcp_listen_portaddr_hash hash table entries: 1024 (order: 2, 163)
- [ 1.604190] TCP established hash table entries: 16384 (order: 5, 131072 byte)
- [ 1.604380] TCP bind hash table entries: 16384 (order: 6, 262144 bytes, line)
- [ 1.604725] TCP: Hash tables configured (established 16384 bind 16384)
- [ 1.604855] UDP hash table entries: 1024 (order: 3, 32768 bytes, linear)
- [ 1.604933] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes, linear)
- [ 1.605185] NET: Registered protocol family 1
- [ 1.605760] RPC: Registered named UNIX socket transport module.
- [ 1.605775] RPC: Registered udp transport module.
- [ 1.605786] RPC: Registered tcp transport module.
- [ 1.605796] RPC: Registered tcp NFSv4.1 backchannel transport module.
- [ 1.605814] PCI: CLS 0 bytes, default 64
- [ 1.605955] Trying to unpack rootfs image as initramfs...
- [ 2.504683] Freeing initrd memory: 12944K
- [ 2.505837] hw perfevents: enabled with armv8_cortex_a53 PMU driver, 7 counte
- [ 2.506254] hw perfevents: enabled with armv8_cortex_a72 PMU driver, 7 counte
- [ 2.506718] kvm [1]: IPA Size Limit: 40bits
- [ 2.508295] kvm [1]: vgic-v2@fff20000
- [ 2.508331] kvm [1]: GIC system register CPU interface enabled
- [ 2.508532] kvm [1]: vgic interrupt IRQ10
- [ 2.508763] kvm [1]: Hyp mode initialized successfully
- [ 3.474481] debugfs: File ':interrupt-controller@fee00000' in directory 'dom!
- [ 3.474526] debugfs: File ':interrupt-controller@fee00000' in directory 'dom!
- [ 3.474552] debugfs: File ':interrupt-controller@fee00000' in directory 'dom!
- [ 3.474578] debugfs: File ':interrupt-controller@fee00000' in directory 'dom!
- [ 3.474602] debugfs: File ':interrupt-controller@fee00000' in directory 'dom!
- [ 3.474627] debugfs: File ':interrupt-controller@fee00000' in directory 'dom!
- [ 3.474652] debugfs: File ':interrupt-controller@fee00000' in directory 'dom!
- [ 3.474677] debugfs: File ':interrupt-controller@fee00000' in directory 'dom!
- [ 3.474701] debugfs: File ':interrupt-controller@fee00000' in directory 'dom!
- [ 3.474726] debugfs: File ':interrupt-controller@fee00000' in directory 'dom!
- [ 3.474751] debugfs: File ':interrupt-controller@fee00000' in directory 'dom!
- [ 3.474776] debugfs: File ':interrupt-controller@fee00000' in directory 'dom!
- [ 3.474801] debugfs: File ':interrupt-controller@fee00000' in directory 'dom!
- [ 3.474825] debugfs: File ':interrupt-controller@fee00000' in directory 'dom!
- [ 3.474850] debugfs: File ':interrupt-controller@fee00000' in directory 'dom!
- [ 3.478213] workingset: timestamp_bits=46 max_order=19 bucket_order=0
- [ 3.487127] zbud: loaded
- [ 3.490101] *** VALIDATE nfs ***
- [ 3.490200] *** VALIDATE nfs4 ***
- [ 3.490309] NFS: Registering the id_resolver key type
- [ 3.490349] Key type id_resolver registered
- [ 3.490365] Key type id_legacy registered
- [ 3.490388] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
- [ 3.490437] ntfs: driver 2.1.32 [Flags: R/W].
- [ 3.490914] fuse: init (API version 7.31)
- [ 3.491044] *** VALIDATE fuseblk ***
- [ 3.491066] *** VALIDATE fuse ***
- [ 3.491469] SGI XFS with ACLs, security attributes, quota, no debug enabled
- [ 3.493641] *** VALIDATE xfs ***
- [ 3.529695] NET: Registered protocol family 38
- [ 3.529736] Key type asymmetric registered
- [ 3.529752] Asymmetric key parser 'x509' registered
- [ 3.529842] Block layer SCSI generic (bsg) driver version 0.4 loaded (major )
- [ 3.530069] io scheduler mq-deadline registered
- [ 3.530089] io scheduler kyber registered
- [ 3.530331] io scheduler bfq registered
- [ 3.532959] vcc5v0_host: supplied by vcc5v0_usb
- [ 3.540310] rockchip-pcie f8000000.pcie: f8000000.pcie supply vpcie1v8 not fr
- [ 3.540385] rockchip-pcie f8000000.pcie: f8000000.pcie supply vpcie0v9 not fr
- [ 3.628371] rockchip-pcie f8000000.pcie: host bridge /pcie@f8000000 ranges:
- [ 3.628428] rockchip-pcie f8000000.pcie: MEM 0x00fa000000..0x00fbdfffff0
- [ 3.628466] rockchip-pcie f8000000.pcie: IO 0x00fbe00000..0x00fbefffff0
- [ 3.628845] rockchip-pcie f8000000.pcie: PCI host bridge to bus 0000:00
- [ 3.628874] pci_bus 0000:00: root bus resource [bus 00-1f]
- [ 3.628895] pci_bus 0000:00: root bus resource [mem 0xfa000000-0xfbdfffff]
- [ 3.628921] pci_bus 0000:00: root bus resource [io 0x0000-0xfffff] (bus add)
- [ 3.628984] pci 0000:00:00.0: [1d87:0100] type 01 class 0x060400
- [ 3.629128] pci 0000:00:00.0: supports D1
- [ 3.629149] pci 0000:00:00.0: PME# supported from D0 D1 D3hot
- [ 3.635531] pci 0000:00:00.0: bridge configuration invalid ([bus 00-00]), reg
- [ 3.635748] pci 0000:01:00.0: [197b:0585] type 00 class 0x010601
- [ 3.635887] pci 0000:01:00.0: reg 0x10: initial BAR value 0x00000000 invalid
- [ 3.635910] pci 0000:01:00.0: reg 0x10: [io size 0x0080]
- [ 3.635958] pci 0000:01:00.0: reg 0x14: initial BAR value 0x00000000 invalid
- [ 3.635979] pci 0000:01:00.0: reg 0x14: [io size 0x0080]
- [ 3.636026] pci 0000:01:00.0: reg 0x18: initial BAR value 0x00000000 invalid
- [ 3.636047] pci 0000:01:00.0: reg 0x18: [io size 0x0080]
- [ 3.636094] pci 0000:01:00.0: reg 0x1c: initial BAR value 0x00000000 invalid
- [ 3.636115] pci 0000:01:00.0: reg 0x1c: [io size 0x0080]
- [ 3.636198] pci 0000:01:00.0: reg 0x20: initial BAR value 0x00000000 invalid
- [ 3.636221] pci 0000:01:00.0: reg 0x20: [io size 0x0080]
- [ 3.636269] pci 0000:01:00.0: reg 0x24: [mem 0x00000000-0x00001fff]
- [ 3.636318] pci 0000:01:00.0: reg 0x30: [mem 0x00000000-0x0000ffff pref]
- [ 3.636371] pci 0000:01:00.0: Max Payload Size set to 256 (was 128, max 512)
- [ 3.636715] pci 0000:01:00.0: PME# supported from D3hot
- [ 3.637010] pci 0000:01:00.0: 4.000 Gb/s available PCIe bandwidth, limited b)
- [ 3.643233] pci_bus 0000:01: busn_res: [bus 01-1f] end is updated to 01
- [ 3.643283] pci 0000:00:00.0: BAR 14: assigned [mem 0xfa000000-0xfa0fffff]
- [ 3.643323] pci 0000:01:00.0: BAR 6: assigned [mem 0xfa000000-0xfa00ffff pre]
- [ 3.643350] pci 0000:01:00.0: BAR 5: assigned [mem 0xfa010000-0xfa011fff]
- [ 3.643384] pci 0000:01:00.0: BAR 0: no space for [io size 0x0080]
- [ 3.643404] pci 0000:01:00.0: BAR 0: failed to assign [io size 0x0080]
- [ 3.643426] pci 0000:01:00.0: BAR 1: no space for [io size 0x0080]
- [ 3.643446] pci 0000:01:00.0: BAR 1: failed to assign [io size 0x0080]
- [ 3.643466] pci 0000:01:00.0: BAR 2: no space for [io size 0x0080]
- [ 3.643486] pci 0000:01:00.0: BAR 2: failed to assign [io size 0x0080]
- [ 3.643507] pci 0000:01:00.0: BAR 3: no space for [io size 0x0080]
- [ 3.643527] pci 0000:01:00.0: BAR 3: failed to assign [io size 0x0080]
- [ 3.643547] pci 0000:01:00.0: BAR 4: no space for [io size 0x0080]
- [ 3.643567] pci 0000:01:00.0: BAR 4: failed to assign [io size 0x0080]
- [ 3.643592] pci 0000:00:00.0: PCI bridge to [bus 01]
- [ 3.643614] pci 0000:00:00.0: bridge window [mem 0xfa000000-0xfa0fffff]
- [ 3.643861] pcieport 0000:00:00.0: enabling device (0000 -> 0002)
- [ 3.644226] pcieport 0000:00:00.0: PME: Signaling with IRQ 229
- [ 3.644577] pcieport 0000:00:00.0: AER: enabled with IRQ 229
- [ 3.645899] IPMI message handler: version 39.2
- [ 3.648753] dma-pl330 ff6d0000.dma-controller: Loaded driver for PL330 DMAC-0
- [ 3.648789] dma-pl330 ff6d0000.dma-controller: DBUFF-32x8bytes Num_Cha2
- [ 3.650572] dma-pl330 ff6e0000.dma-controller: Loaded driver for PL330 DMAC-0
- [ 3.650603] dma-pl330 ff6e0000.dma-controller: DBUFF-128x8bytes Num_Ch6
- [ 3.652623] pwm-regulator: supplied by regulator-dummy
- [ 3.652880] vcc5v0_typec: supplied by vcc5v0_usb
- [ 3.653740] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
- [ 3.656209] ff180000.serial: ttyS0 at MMIO 0xff180000 (irq = 38, base_baud =A
- [ 3.656421] serial serial0: tty port ttyS0 registered
- [ 3.657085] ff1a0000.serial: ttyS2 at MMIO 0xff1a0000 (irq = 39, base_baud =A
- [ 3.797764] printk: console [ttyS2] enabled
- [ 3.800772] cacheinfo: Unable to detect cache hierarchy for CPU 0
- [ 3.802014] ahci 0000:01:00.0: enabling device (0000 -> 0002)
- [ 3.803137] ahci 0000:01:00.0: SSS flag set, parallel bus scan disabled
- [ 3.803842] ahci 0000:01:00.0: AHCI 0001.0301 32 slots 5 ports 6 Gbps 0x1f ie
- [ 3.804572] ahci 0000:01:00.0: flags: 64bit ncq sntf stag pm led clo pmp fbs
- [ 3.809656] scsi host0: ahci
- [ 3.810470] scsi host1: ahci
- [ 3.811149] scsi host2: ahci
- [ 3.811828] scsi host3: ahci
- [ 3.812501] scsi host4: ahci
- [ 3.812957] ata1: SATA max UDMA/133 abar m8192@0xfa010000 port 0xfa010100 ir0
- [ 3.813628] ata2: SATA max UDMA/133 abar m8192@0xfa010000 port 0xfa010180 ir1
- [ 3.814293] ata3: SATA max UDMA/133 abar m8192@0xfa010000 port 0xfa010200 ir2
- [ 3.814958] ata4: SATA max UDMA/133 abar m8192@0xfa010000 port 0xfa010280 ir3
- [ 3.815624] ata5: SATA max UDMA/133 abar m8192@0xfa010000 port 0xfa010300 ir4
- [ 3.819513] spi-nor spi0.0: gd25q128 (16384 Kbytes)
- [ 3.842195] libphy: Fixed MDIO Bus: probed
- [ 3.848300] OF: graph: no port node found in /syscon@ff770000/usb2-phy@e450/t
- [ 3.856850] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
- [ 3.857445] ehci-pci: EHCI PCI platform driver
- [ 3.857880] ehci-platform: EHCI generic platform driver
- [ 3.860608] ehci-platform fe380000.usb: EHCI Host Controller
- [ 3.861262] ehci-platform fe380000.usb: new USB bus registered, assigned bus1
- [ 3.862076] ehci-platform fe380000.usb: irq 31, io mem 0xfe380000
- [ 3.886179] ehci-platform fe380000.usb: USB 2.0 started, EHCI 1.00
- [ 3.886920] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, b6
- [ 3.887656] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber1
- [ 3.888299] usb usb1: Product: EHCI Host Controller
- [ 3.888735] usb usb1: Manufacturer: Linux 5.6.0-1134-ayufan-g652fb97d87eb ehd
- [ 3.889406] usb usb1: SerialNumber: fe380000.usb
- [ 3.890274] hub 1-0:1.0: USB hub found
- [ 3.890648] hub 1-0:1.0: 1 port detected
- [ 3.893491] ehci-platform fe3c0000.usb: EHCI Host Controller
- [ 3.894152] ehci-platform fe3c0000.usb: new USB bus registered, assigned bus2
- [ 3.894965] ehci-platform fe3c0000.usb: irq 33, io mem 0xfe3c0000
- [ 3.916177] ehci-platform fe3c0000.usb: USB 2.0 started, EHCI 1.00
- [ 3.916891] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, b6
- [ 3.917627] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber1
- [ 3.918270] usb usb2: Product: EHCI Host Controller
- [ 3.918707] usb usb2: Manufacturer: Linux 5.6.0-1134-ayufan-g652fb97d87eb ehd
- [ 3.919378] usb usb2: SerialNumber: fe3c0000.usb
- [ 3.920267] hub 2-0:1.0: USB hub found
- [ 3.920633] hub 2-0:1.0: 1 port detected
- [ 3.921549] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
- [ 3.922109] ohci-pci: OHCI PCI platform driver
- [ 3.922569] ohci-platform: OHCI generic platform driver
- [ 3.923232] ohci-platform fe3a0000.usb: Generic Platform OHCI controller
- [ 3.923985] ohci-platform fe3a0000.usb: new USB bus registered, assigned bus3
- [ 3.924787] ohci-platform fe3a0000.usb: irq 32, io mem 0xfe3a0000
- [ 3.990472] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001, b6
- [ 3.991208] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber1
- [ 3.991851] usb usb3: Product: Generic Platform OHCI controller
- [ 3.992378] usb usb3: Manufacturer: Linux 5.6.0-1134-ayufan-g652fb97d87eb ohd
- [ 3.993050] usb usb3: SerialNumber: fe3a0000.usb
- [ 3.994052] hub 3-0:1.0: USB hub found
- [ 3.994452] hub 3-0:1.0: 1 port detected
- [ 3.995495] ohci-platform fe3e0000.usb: Generic Platform OHCI controller
- [ 3.996329] ohci-platform fe3e0000.usb: new USB bus registered, assigned bus4
- [ 3.997162] ohci-platform fe3e0000.usb: irq 34, io mem 0xfe3e0000
- [ 4.070406] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001, b6
- [ 4.071153] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber1
- [ 4.071803] usb usb4: Product: Generic Platform OHCI controller
- [ 4.072336] usb usb4: Manufacturer: Linux 5.6.0-1134-ayufan-g652fb97d87eb ohd
- [ 4.073014] usb usb4: SerialNumber: fe3e0000.usb
- [ 4.073963] hub 4-0:1.0: USB hub found
- [ 4.074341] hub 4-0:1.0: 1 port detected
- [ 4.075463] uhci_hcd: USB Universal Host Controller Interface driver
- [ 4.077144] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
- [ 4.077842] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus n5
- [ 4.078694] xhci-hcd xhci-hcd.0.auto: hcc params 0x0220fe64 hci version 0x110
- [ 4.079559] xhci-hcd xhci-hcd.0.auto: irq 238, io mem 0xfe800000
- [ 4.080539] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002, b6
- [ 4.081285] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber1
- [ 4.081935] usb usb5: Product: xHCI Host Controller
- [ 4.082376] usb usb5: Manufacturer: Linux 5.6.0-1134-ayufan-g652fb97d87eb xhd
- [ 4.083055] usb usb5: SerialNumber: xhci-hcd.0.auto
- [ 4.084042] hub 5-0:1.0: USB hub found
- [ 4.084423] hub 5-0:1.0: 1 port detected
- [ 4.085186] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
- [ 4.085851] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus n6
- [ 4.086606] xhci-hcd xhci-hcd.0.auto: Host supports USB 3.0 SuperSpeed
- [ 4.087271] usb usb6: We don't know the algorithms for LPM for this host, di.
- [ 4.088140] usb usb6: New USB device found, idVendor=1d6b, idProduct=0003, b6
- [ 4.088885] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber1
- [ 4.089534] usb usb6: Product: xHCI Host Controller
- [ 4.089975] usb usb6: Manufacturer: Linux 5.6.0-1134-ayufan-g652fb97d87eb xhd
- [ 4.090654] usb usb6: SerialNumber: xhci-hcd.0.auto
- [ 4.091619] hub 6-0:1.0: USB hub found
- [ 4.092004] hub 6-0:1.0: 1 port detected
- [ 4.092961] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
- [ 4.093658] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus n7
- [ 4.094508] xhci-hcd xhci-hcd.1.auto: hcc params 0x0220fe64 hci version 0x110
- [ 4.095406] xhci-hcd xhci-hcd.1.auto: irq 239, io mem 0xfe900000
- [ 4.096461] usb usb7: New USB device found, idVendor=1d6b, idProduct=0002, b6
- [ 4.097206] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber1
- [ 4.097856] usb usb7: Product: xHCI Host Controller
- [ 4.098297] usb usb7: Manufacturer: Linux 5.6.0-1134-ayufan-g652fb97d87eb xhd
- [ 4.098975] usb usb7: SerialNumber: xhci-hcd.1.auto
- [ 4.099952] hub 7-0:1.0: USB hub found
- [ 4.100341] hub 7-0:1.0: 1 port detected
- [ 4.101100] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
- [ 4.101800] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus n8
- [ 4.102512] xhci-hcd xhci-hcd.1.auto: Host supports USB 3.0 SuperSpeed
- [ 4.103177] usb usb8: We don't know the algorithms for LPM for this host, di.
- [ 4.104052] usb usb8: New USB device found, idVendor=1d6b, idProduct=0003, b6
- [ 4.104797] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber1
- [ 4.105446] usb usb8: Product: xHCI Host Controller
- [ 4.105887] usb usb8: Manufacturer: Linux 5.6.0-1134-ayufan-g652fb97d87eb xhd
- [ 4.106590] usb usb8: SerialNumber: xhci-hcd.1.auto
- [ 4.107577] hub 8-0:1.0: USB hub found
- [ 4.107953] hub 8-0:1.0: 1 port detected
- [ 4.108883] usbcore: registered new interface driver uas
- [ 4.109579] usbcore: registered new interface driver usb-storage
- [ 4.110166] usbcore: registered new interface driver ums-alauda
- [ 4.110742] usbcore: registered new interface driver ums-cypress
- [ 4.111327] usbcore: registered new interface driver ums-datafab
- [ 4.111914] usbcore: registered new interface driver ums_eneub6250
- [ 4.112513] usbcore: registered new interface driver ums-freecom
- [ 4.113097] usbcore: registered new interface driver ums-isd200
- [ 4.113673] usbcore: registered new interface driver ums-jumpshot
- [ 4.114262] usbcore: registered new interface driver ums-karma
- [ 4.114835] usbcore: registered new interface driver ums-onetouch
- [ 4.115441] usbcore: registered new interface driver ums-realtek
- [ 4.116025] usbcore: registered new interface driver ums-sddr09
- [ 4.116645] usbcore: registered new interface driver ums-sddr55
- [ 4.117223] usbcore: registered new interface driver ums-usbat
- [ 4.117850] usbcore: registered new interface driver usbserial_generic
- [ 4.118458] usbserial: USB Serial support registered for generic
- [ 4.121880] mousedev: PS/2 mouse device common for all mice
- [ 4.124194] i2c i2c-1: of_i2c: modalias failure on /i2c@ff110000/i2s0
- [ 4.124788] i2c i2c-1: Failed to create I2C device for /i2c@ff110000/i2s0
- [ 4.127422] rk808 0-001b: chip id: 0x0
- [ 4.132456] rk808-regulator rk808-regulator: there is no dvs0 gpio
- [ 4.133048] rk808-regulator rk808-regulator: there is no dvs1 gpio
- [ 4.133674] DCDC_REG1: supplied by vcc5v0_sys
- [ 4.134977] DCDC_REG2: supplied by vcc5v0_sys
- [ 4.135900] DCDC_REG3: supplied by vcc5v0_sys
- [ 4.136604] DCDC_REG4: supplied by vcc5v0_sys
- [ 4.137633] LDO_REG1: supplied by vcc5v0_sys
- [ 4.139268] LDO_REG2: supplied by vcc5v0_sys
- [ 4.140630] LDO_REG3: supplied by vcc5v0_sys
- [ 4.142152] LDO_REG4: supplied by vcc5v0_sys
- [ 4.143659] LDO_REG5: supplied by vcc5v0_sys
- [ 4.145009] LDO_REG6: supplied by vcc5v0_sys
- [ 4.146534] LDO_REG7: supplied by vcc5v0_sys
- [ 4.147753] ata1: SATA link down (SStatus 0 SControl 300)
- [ 4.147913] LDO_REG8: supplied by vcc5v0_sys
- [ 4.149749] SWITCH_REG1: supplied by vcc3v3_sys
- [ 4.150462] SWITCH_REG2: supplied by vcc3v3_sys
- [ 4.154858] rk808-rtc rk808-rtc: registered as rtc0
- [ 4.156123] fan53555-regulator 0-0040: FAN53555 Option[8] Rev[1] Detected!
- [ 4.156817] fan53555-reg: supplied by vcc5v0_sys
- [ 4.158592] vcc1v8_s3: supplied by vcc_1v8
- [ 4.159894] fan53555-regulator 0-0041: FAN53555 Option[8] Rev[1] Detected!
- [ 4.160535] fan53555-reg: supplied by vcc5v0_sys
- [ 4.161950] random: fast init done
- [ 4.164116] typec_fusb302 4-0022: No cable types defined, using default cabls
- [ 4.164878] OF: graph: no port node found in /i2c@ff3d0000/typec-portc@22
- [ 4.181073] device-mapper: uevent: version 1.0.3
- [ 4.181953] device-mapper: ioctl: 4.42.0-ioctl (2020-02-27) initialised: dm-m
- [ 4.184457] energy_model: pd0: hertz/watts ratio non-monotonically decreasin0
- [ 4.190009] sdhci: Secure Digital Host Controller Interface driver
- [ 4.190558] sdhci: Copyright(c) Pierre Ossman
- [ 4.191242] Synopsys Designware Multimedia Card Interface Driver
- [ 4.192290] dwmmc_rockchip fe310000.mmc: IDMAC supports 32-bit address mode.
- [ 4.192918] dwmmc_rockchip fe310000.mmc: Using internal DMA controller.
- [ 4.193503] dwmmc_rockchip fe310000.mmc: Version ID is 270a
- [ 4.194016] dwmmc_rockchip fe310000.mmc: DW MMC controller at irq 28,32 bit o
- [ 4.194933] dwmmc_rockchip fe310000.mmc: allocated mmc-pwrseq
- [ 4.195437] mmc_host mmc0: card is non-removable.
- [ 4.208758] mmc_host mmc0: Bus speed (slot 0) = 400000Hz (slot req 400000Hz,)
- [ 4.222555] dwmmc_rockchip fe320000.mmc: IDMAC supports 32-bit address mode.
- [ 4.223198] dwmmc_rockchip fe320000.mmc: Using internal DMA controller.
- [ 4.223785] dwmmc_rockchip fe320000.mmc: Version ID is 270a
- [ 4.224333] dwmmc_rockchip fe320000.mmc: DW MMC controller at irq 29,32 bit o
- [ 4.225246] dwmmc_rockchip fe320000.mmc: Got CD GPIO
- [ 4.238448] mmc_host mmc1: Bus speed (slot 0) = 400000Hz (slot req 400000Hz,)
- [ 4.252789] sdhci-pltfm: SDHCI platform and OF driver helper
- [ 4.254659] mmc2: CQHCI version 5.10
- [ 4.255649] mmc0: queuing unknown CIS tuple 0x80 (2 bytes)
- [ 4.257754] mmc0: queuing unknown CIS tuple 0x80 (3 bytes)
- [ 4.259823] mmc0: queuing unknown CIS tuple 0x80 (3 bytes)
- [ 4.263197] mmc0: queuing unknown CIS tuple 0x80 (7 bytes)
- [ 4.278759] mmc2: SDHCI controller on fe330000.sdhci [fe330000.sdhci] using A
- [ 4.281372] ledtrig-cpu: registered to indicate activity on CPUs
- [ 4.282351] hid: raw HID events driver (C) Jiri Kosina
- [ 4.283007] usbcore: registered new interface driver usbhid
- [ 4.283504] usbhid: USB HID core driver
- [ 4.284099] hantro-vpu ff650000.video-codec: Adding to iommu group 0
- [ 4.285357] hantro-vpu ff650000.video-codec: registered rockchip,rk3399-vpu-0
- [ 4.286241] hantro-vpu ff650000.video-codec: registered rockchip,rk3399-vpu-1
- [ 4.289841] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 5000000)
- [ 4.290772] mmc1: new high speed SDHC card at address 0001
- [ 4.291826] Initializing XFRM netlink socket
- [ 4.291877] mmcblk1: mmc1:0001 EB1QT 29.8 GiB
- [ 4.293682] NET: Registered protocol family 10
- [ 4.299171] GPT:Primary header thinks Alt. header is not at the end of the d.
- [ 4.299839] GPT:3906241 != 62521343
- [ 4.300150] GPT:Alternate GPT header not at the end of the disk.
- [ 4.300679] GPT:3906241 != 62521343
- [ 4.300989] GPT: Use GNU Parted to correct GPT errors.
- [ 4.301464] mmcblk1: p1 p2 p3 p4
- [ 4.324529] mmc_host mmc0: Bus speed (slot 0) = 148500000Hz (slot req 150000)
- [ 4.339569] Segment Routing with IPv6
- [ 4.339987] mip6: Mobile IPv6
- [ 4.340256] NET: Registered protocol family 17
- [ 4.340845] Key type dns_resolver registered
- [ 4.341764] registered taskstats version 1
- [ 4.342227] zswap: loaded using pool lzo/zbud
- [ 4.342949] Key type ._fscrypt registered
- [ 4.343305] Key type .fscrypt registered
- [ 4.343651] Key type fscrypt-provisioning registered
- [ 4.344151] Key type big_key registered
- [ 4.367422] Key type encrypted registered
- [ 4.402843] rk808-rtc rk808-rtc: setting system clock to 2013-01-18T08:50:18)
- [ 4.403615] of_cfs_init
- [ 4.403947] of_cfs_init: OK
- [ 4.404692] ALSA device list:
- [ 4.404961] No soundcards found.
- [ 4.405479] ttyS2 - failed to request DMA
- [ 4.477942] ata2: SATA link down (SStatus 0 SControl 300)
- [ 4.576559] dwmmc_rockchip fe310000.mmc: Successfully tuned phase to 164
- [ 4.583367] mmc0: new ultra high speed SDR104 SDIO card at address 0001
- [ 4.808286] ata3: SATA link down (SStatus 0 SControl 300)
- [ 5.148308] ata4: SATA link down (SStatus 0 SControl 300)
- [ 5.488329] ata5: SATA link down (SStatus 0 SControl 300)
- [ 5.489553] Freeing unused kernel memory: 1216K
- [ 5.490078] Run /init as init process
- Loading, please wait...
- Starting version 241
- [ 5.748325] rk_gmac-dwmac fe300000.ethernet: IRQ eth_wake_irq not found
- [ 5.748927] rk_gmac-dwmac fe300000.ethernet: IRQ eth_lpi not found
- [ 5.749564] rk_gmac-dwmac fe300000.ethernet: PTP uses main clock
- [ 5.750204] rk_gmac-dwmac fe300000.ethernet: clock input or output? (input).
- [ 5.750828] rk_gmac-dwmac fe300000.ethernet: TX delay(0x28).
- [ 5.751328] rk_gmac-dwmac fe300000.ethernet: RX delay(0x11).
- [ 5.751832] rk_gmac-dwmac fe300000.ethernet: integrated PHY? (no).
- [ 5.752402] rk_gmac-dwmac fe300000.ethernet: cannot get clock clk_mac_speed
- [ 5.753018] rk_gmac-dwmac fe300000.ethernet: clock input from PHY
- [ 5.758610] rk_gmac-dwmac fe300000.ethernet: init for RGMII
- [ 5.760049] rk_gmac-dwmac fe300000.ethernet: User ID: 0x10, Synopsys ID: 0x35
- [ 5.760706] rk_gmac-dwmac fe300000.ethernet: DWMAC1000
- [ 5.761173] rk_gmac-dwmac fe300000.ethernet: DMA HW capability register suppd
- [ 5.761835] rk_gmac-dwmac fe300000.ethernet: RX Checksum Offload Engine suppd
- [ 5.762495] rk_gmac-dwmac fe300000.ethernet: COE Type 2
- [ 5.762956] rk_gmac-dwmac fe300000.ethernet: TX Checksum insertion supported
- [ 5.763576] rk_gmac-dwmac fe300000.ethernet: Wake-Up On Lan supported
- [ 5.764185] rk_gmac-dwmac fe300000.ethernet: Normal descriptors
- [ 5.764716] rk_gmac-dwmac fe300000.ethernet: Ring mode enabled
- [ 5.765233] rk_gmac-dwmac fe300000.ethernet: Enable RX Mitigation via HW Watr
- [ 5.773223] input: gpio-keys as /devices/platform/gpio-keys/input/input0
- [ 5.905108] libphy: stmmac: probed
- [ 5.905440] RTL8211F Gigabit Ethernet stmmac-0:00: attached PHY driver [RTL8)
- [ 5.906553] RTL8211F Gigabit Ethernet stmmac-0:01: attached PHY driver [RTL8)
- Begin: Loading essential drivers ... done.
- Begin: Running /scripts/init-premount ... done.
- Begin: Mounting root file system ... Begin: Running /scripts/local-top ... done.
- Begin: Running /scripts/local-premount ... done.
- Warning: fsck not present, so skipping root file system
- [ 6.053224] EXT4-fs (mmcblk1p4): mounted filesystem with writeback data mode)
- done.
- Begin: Running /scripts/local-bottom ... done.
- Begin: Running /scripts/init-bottom ... done.
- [ 6.748296] systemd[1]: System time before build time, advancing clock.
- [ 6.785321] systemd[1]: systemd 241 running in system mode. (+PAM +AUDIT +SE)
- [ 6.788854] systemd[1]: Detected architecture arm64.
- Welcome to Debian GNU/Linux 10 (buster)!
- [ 6.845592] systemd[1]: Set hostname to <rockpro64>.
- [ 6.848611] random: systemd: uninitialized urandom read (16 bytes read)
- [ 6.849274] systemd[1]: Initializing machine ID from random generator.
- [ 7.414440] random: systemd: uninitialized urandom read (16 bytes read)
- [ 7.419162] random: systemd: uninitialized urandom read (16 bytes read)
- [ 7.420158] systemd[1]: Set up automount Arbitrary Executable File Formats F.
- [ OK ] Set up automount Arbitrary�…s File System Automount Point.
- [ 7.446848] systemd[1]: Listening on Journal Socket (/dev/log).
- [ OK ] Listening on Journal Socket (/dev/log).
- [ 7.476796] systemd[1]: Listening on udev Kernel Socket.
- [ OK ] Listening on udev Kernel Socket.
- [ 7.506678] systemd[1]: Started Forward Password Requests to Wall Directory .
- [ OK ] Started Forward Password R�…uests to Wall Directory Watch.
- [ 7.539261] systemd[1]: Created slice User and Session Slice.
- [ OK ] Created slice User and Session Slice.
- [ 7.570444] systemd[1]: Created slice system-systemd\x2dfsck.slice.
- [ OK ] Created slice system-systemd\x2dfsck.slice.
- [ OK ] Listening on fsck to fsckd communication Socket.
- [ OK ] Listening on initctl Compatibility Named Pipe.
- [ OK ] Listening on Journal Socket.
- Starting Set the console keyboard layout...
- Starting Create list of re�…odes for the current kernel...
- Starting Load Kernel Modules...
- Mounting Kernel Debug File System...
- Starting Remount Root and Kernel File Systems...
- Mounting Huge Pages File System...
- [ 7.827690] EXT4-fs (mmcblk1p4): re-mounted. Opts: (null)
- [ OK ] Started Dispatch Password �…ts to Console Directory Watch.
- [ OK ] Reached target Local Encrypted Volumes.
- [ OK ] Reached target Paths.
- [ OK ] Created slice system-getty.slice.
- [ OK ] Reached target System Time Synchronized.
- [ OK ] Listening on udev Control Socket.
- Starting udev Coldplug all Devices...
- Starting Restore / save the current clock...
- Starting Nameserver information manager...
- Mounting POSIX Message Queue File System...
- [ OK ] Reached target Remote File Systems.
- [ OK ] Reached target Swap.
- [ OK ] Created slice system-serial\x2dgetty.slice.
- [ OK ] Listening on Syslog Socket.
- Starting Journal Service...
- [ OK ] Reached target Slices.
- [ OK ] Started Set the console keyboard layout.
- [ OK ] Started Create list of req�… nodes for the current kernel.
- [ OK ] Started Load Kernel Modules.
- [ OK ] Started Journal Service.
- [ OK ] Mounted Kernel Debug File System.
- [ OK ] Started Remount Root and Kernel File Systems.
- [ OK ] Mounted Huge Pages File System.
- [ OK ] Started Restore / save the current clock.
- [ OK ] Mounted POSIX Message Queue File System.
- [ OK ] Started Nameserver information manager.
- Starting Rebuild Hardware Database...
- Starting Load/Save Random Seed...
- Starting Create System Users...
- Starting Flush Journal to Persistent Storage...
- Mounting Kernel Configuration File System...
- Mounting FUSE Control File System...
- Starting Apply Kernel Variables...
- [ OK ] Started udev Coldplug all Devices.
- [ OK ] Started Load/Save Random Seed.
- [ OK ] Mounted Kernel Configuration File System.
- [ OK ] Mounted FUSE Control File System.
- [ OK ] Started Apply Kernel Variables.
- Starting Helper to synchronize boot up for ifupdown...
- [ 8.928043] systemd-journald[523]: Received request to flush runtime journal1
- [ OK ] Started Flush Journal to Persistent Storage.
- [ OK ] Started Helper to synchronize boot up for ifupdown.
- [ OK ] Started Create System Users.
- Starting Create Static Device Nodes in /dev...
- [ OK ] Started Create Static Device Nodes in /dev.
- [ OK ] Reached target Local File Systems (Pre).
- [ 9.743533] random: crng init done
- [ 9.743883] random: 7 urandom warning(s) missed due to ratelimiting
- [ OK ] Started Rebuild Hardware Database.
- Starting udev Kernel Device Manager...
- [ OK ] Started udev Kernel Device Manager.
- [ OK ] Found device /dev/ttyS2.
- [ 10.377973] es8316 1-0011: Failed to get IRQ 0: -22
- [ 10.463142] platform regulatory.0: Direct firmware load for regulatory.db fa2
- [ 10.463928] cfg80211: failed to load regulatory.db
- [ OK ] Found device /sys/subsystem/net/devices/eth0.
- [ 10.554998] rockchip-rga ff680000.rga: HW Version: 0x03.02
- [ 10.555770] rockchip-rga ff680000.rga: Registered rockchip-rga as /dev/video2
- [ 10.590938] Bluetooth: Core ver 2.22
- [ 10.591340] NET: Registered protocol family 31
- [ 10.591738] Bluetooth: HCI device and connection manager initialized
- [ 10.592321] Bluetooth: HCI socket layer initialized
- [ 10.592763] Bluetooth: L2CAP socket layer initialized
- [ 10.593233] Bluetooth: SCO socket layer initialized
- [ 10.630101] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac4359-sdio f9
- [ 10.631392] usbcore: registered new interface driver brcmfmac
- [ 10.661190] brcmfmac mmc0:0001:1: Direct firmware load for brcm/brcmfmac43592
- [ OK ] Found device /dev/disk/by-label/boot-efi.
- [ 10.692746] panfrost ff9a0000.gpu: clock rate = 500000000
- [ 10.693548] panfrost ff9a0000.gpu: mali-t860 id 0x860 major 0x2 minor 0x0 st0
- [ 10.694245] panfrost ff9a0000.gpu: features: 00000000,100e77bf, issues: 00000
- [ 10.694968] panfrost ff9a0000.gpu: Features: L2:0x07120206 Shader:0x000000007
- [ 10.696006] panfrost ff9a0000.gpu: shader_present=0xf l2_present=0x1
- [ 10.698379] [drm] Initialized panfrost 1.1.0 20180908 for ff9a0000.gpu on mi0
- [ 10.762205] Bluetooth: HCI UART driver ver 2.3
- [ 10.762606] Bluetooth: HCI UART protocol H4 registered
- [ 10.763056] Bluetooth: HCI UART protocol BCSP registered
- [ 10.763550] Bluetooth: HCI UART protocol LL registered
- [ 10.764001] Bluetooth: HCI UART protocol ATH3K registered
- [ 10.764486] Bluetooth: HCI UART protocol Three-wire (H5) registered
- [ 10.765204] Bluetooth: HCI UART protocol Intel registered
- [ 10.765750] Bluetooth: HCI UART protocol Broadcom registered
- [ 10.766383] Bluetooth: HCI UART protocol QCA registered
- [ 10.766855] Bluetooth: HCI UART protocol Marvell registered
- [ 10.778499] rockchip-vop ff8f0000.vop: Adding to iommu group 1
- [ 10.782015] rockchip-vop ff900000.vop: Adding to iommu group 2
- [ 10.787828] rockchip-drm display-subsystem: bound ff8f0000.vop (ops vop_comp)
- [ OK ] Found device /dev/disk/by-label/linux-boot.
- [ 10.790700] rockchip-drm display-subsystem: bound ff900000.vop (ops vop_comp)
- [ 10.791882] dwhdmi-rockchip ff940000.hdmi: Detected HDMI TX controller v2.11)
- [ 10.793618] rockchip-drm display-subsystem: bound ff940000.hdmi (ops dw_hdmi)
- [ 10.794485] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
- [ 10.795072] [drm] No driver support for vblank timestamp query.
- Starting File System Check�…ev/disk/by-label/[ 10.829145] phy phy-f R
- linux-boot...
- [ 10.852608] asoc-audio-graph-card sound: ES8316 HiFi <-> ff890000.i2s mappink
- [ 10.852644] asoc-audio-graph-card sound: ASoC: no DMI vendor name!
- [ 10.865211] Console: switching to colour frame buffer device 240x67
- [ 10.886396] ttyS0 - failed to request DMA
- [ 10.924223] rockchip-drm display-subsystem: fb0: rockchipdrmfb frame buffer e
- Starting File System Check�…/dev/disk/by-label/boot-efi...
- [ 10.966735] [drm] Initialized rockchip 1.0.0 20140818 for display-subsystem 1
- [ 10.975995] Registered IR keymap rc-cec
- [ 10.976118] rc rc0: dw_hdmi as /devices/platform/ff940000.hdmi/rc/rc0
- [ 10.976322] input: dw_hdmi as /devices/platform/ff940000.hdmi/rc/rc0/input1
- [ 11.003941] asoc-simple-card hdmi-sound: i2s-hifi <-> ff8a0000.i2s mapping ok
- [ 11.003978] asoc-simple-card hdmi-sound: ASoC: no DMI vendor name!
- [ OK ] Reached target Bluetooth.
- [ OK ] Started File System Check Daemon to report status.
- [ 11.140518] Bluetooth: hci0: BCM: chip id 121
- [ 11.142873] Bluetooth: hci0: BCM: features 0x0e
- [ 11.166050] Bluetooth: hci0: BCM4359C0lete)
- [ 11.166461] Bluetooth: hci0: BCM4359C0 (003.001.006) build 0000
- [ 11.167202] bluetooth hci0: Direct firmware load for brcm/BCM4359C0.hcd fail2
- [ 11.168102] Bluetooth: hci0: BCM: Patch brcm/BCM4359C0.hcd not found
- [ OK ] Listening on Load/Save RF �…itch Status /dev/rfkill Watch.
- [ OK ] Started File System Check �…/dev/disk/by-label/linux-boot.
- [ OK ] Started File System Check on /dev/disk/by-label/boot-efi.
- Starting Load/Save RF Kill Switch Status...
- Mounting /boot...
- [ OK ] Started Load/Save RF Kill Switch Status.
- [ 11.362026] EXT4-fs (mmcblk1p3): mounted filesystem with ordered data mode. )
- [ 11.363104] ext4 filesystem being mounted at /boot supports timestamps until)
- [ OK ] Mounted /boot.
- Mounting /boot/efi...
- [ OK ] Mounted /boot/efi.
- [ OK ] Reached target Local File Systems.
- [ OK ] Started ifup for eth0.
- Starting Raise network interfaces...
- Starting Create Volatile Files and Directories...
- Starting Set console font and keymap...
- [ OK ] Started Create Volatile Files and Directories.
- [ OK ] Started Set console font and keymap.
- Starting Update UTMP about System Boot/Shutdown...
- [ OK ] Started Update UTMP about System Boot/Shutdown.
- [ 11.666251] brcmfmac: brcmf_sdio_htclk: HT Avail timeout (1000000): clkctl 00
- [ OK ] Reached target System Initialization.
- [ OK ] Listening on D-Bus System Message Bus Socket.
- [ 11.746191] rk_gmac-dwmac fe300000.ethernet eth0: PHY [stmmac-0:00] driver [)
- [ OK ] Listening on Avahi mDNS/DNS-SD Stack Activation Socket.
- [ OK ] Reached target Sockets.
- [ OK ] Reached target Basic System.
- Starting Rock 64 First boot...
- [ 11.803359] rk_gmac-dwmac fe300000.ethernet eth0: No Safety Features supportd
- [ 11.804289] rk_gmac-dwmac fe300000.ethernet eth0: PTP not supported by HW
- [ 11.805079] rk_gmac-dwmac fe300000.ethernet eth0: configuring for phy/rgmii e
- Starting Avahi mDNS/DNS-SD Stack...
- Starting Generate SSH keys if not there...
- Starting Login Service...
- [ OK ] Started Manage Sound Card State (restore and store).
- [ OK ] Started Regular background program processing daemon.
- [ OK ] Started D-Bus System Message Bus.
- Starting WPA supplicant...
- Starting Network Manager...
- Starting Save/Restore Sound Card State...
- Starting Resets System Activity Data Collector...
- [ OK ] Started Daily Cleanup of Temporary Directories.
- [ OK ] Started Daily apt download activities.
- Starting Start bluetooth on ttyS0...
- [ OK ] Started Daily rotation of log files.
- Starting System Logging Service...
- [ OK ] Started Daily apt upgrade and clean activities.
- [ OK ] Reached target Timers.
- [ OK ] Started Raise network interfaces.
- [ OK ] Started Save/Restore Sound Card State.
- [ OK ] Started Resets System Activity Data Collector.
- [ OK ] Reached target Sound Card.
- [ OK ] Started System Logging Service.
- [ OK ] Started Login Service.
- [ OK ] Started Avahi mDNS/DNS-SD Stack.
- [ OK ] Started WPA supplicant.
- [ 12.886484] rd 0-5: Disabling EAS, schedutil is mandatory
- [ OK ] Started Generate SSH keys if not there.
- [ OK ] Started Network Manager.
- [ OK ] Reached target Network.
- Starting OpenBSD Secure Shell server...
- Starting Permit User Sessions...
- Starting Network Time Service...
- [ OK ] Started Permit User Sessions.
- [ OK ] Started OpenBSD Secure Shell server.
- [ OK ] Started Network Time Service.
- Starting Hostname Service...
- [ OK ] Started Serial Getty on ttyS2.
- [ OK ] Started Getty on tty1.
- [ OK ] Reached target Login Prompts.
- [ OK ] Started Hostname Service.
- Starting Network Manager Script Dispatcher Service...
- [ OK ] Started Network Manager Script Dispatcher Service.
- Starting Authorization Manager...
- [ OK ] Started Authorization Manager.
- [FAILED] Failed to start Start bluetooth on ttyS0.
- See 'systemctl status sdio-hciattach.service' for details.
- [ 14.436424] EXT4-fs (mmcblk1p4): resizing filesystem from 422728 to 7749627 s
- [ 16.228162] EXT4-fs (mmcblk1p4): resized filesystem to 7749627
- [ 17.046652] rk_gmac-dwmac fe300000.ethernet eth0: Link is Up - 1Gbps/Full - f
- [ 17.047572] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
- [ OK ] Started Rock 64 First boot.
- [ OK ] Reached target Multi-User System.
- [ OK ] Reached target Graphical Interface.
- Starting Update UTMP about System Runlevel Changes...
- [ OK ] Started Update UTMP about System Runlevel Changes.
- Debian GNU/Linux 10 rockpro64 ttyS2
- [ 215.156237] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
- [ 215.405186] ata1.00: ATA-10: ST2000LM015-2E8174, SDM1, max UDMA/133
- [ 215.406120] ata1.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth 32), AA
- [ 215.456688] ata1.00: configured for UDMA/133
- [ 215.458198] scsi 0:0:0:0: Direct-Access ATA ST2000LM015-2E81 SDM1 P5
- [ 215.461053] sd 0:0:0:0: Attached scsi generic sg0 type 0
- [ 215.461287] sd 0:0:0:0: [sda] 3907029168 512-byte logical blocks: (2.00 TB/1)
- [ 215.462714] sd 0:0:0:0: [sda] 4096-byte physical blocks
- [ 215.463359] sd 0:0:0:0: [sda] Write Protect is off
- [ 215.464010] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doeA
- [ 215.614516] GPT:Primary header thinks Alt. header is not at the end of the d.
- [ 215.615215] GPT:3906241 != 3907029167
- [ 215.615554] GPT:Alternate GPT header not at the end of the disk.
- [ 215.616105] GPT:3906241 != 3907029167
- [ 215.616463] GPT: Use GNU Parted to correct GPT errors.
- [ 215.616955] sda: sda1 sda2 sda3 sda4
- [ 215.618720] sd 0:0:0:0: [sda] Attached SCSI disk
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement