Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- Willkommen zu minicom 2.7.1
- Optionen: I18n
- Übersetzt am May 6 2018, 08:02:47.
- Port /dev/ttyUSB0
- Drücken Sie CTRL-A Z für Hilfe zu speziellen Tasten
- U-Boot TPL 2020.01-ayufan-2011-g26eed9fd (Apr 09 2020 - 21:56:16)
- Channel 0: LPDDR4, 50MHz
- BW=32 Col=10 Bk=8 CS0 Row=15 CS=1 Die BW=16 Size=1024MB
- Channel 1: LPDDR4, 50MHz
- BW=32 Col=10 Bk=8 CS0 Row=15 CS=1 Die BW=16 Size=1024MB
- 256B stride
- 256B stride
- lpddr4_set_rate: change freq to 400000000 mhz 0, 1
- lpddr4_set_rate: change freq to 800000000 mhz 1, 0
- Trying to boot from BOOTROM
- Returning to boot ROM...
- U-Boot SPL 2020.01-ayufan-2011-g26eed9fd (Apr 09 2020 - 21:56:16 +0000)
- Trying to boot from SPI
- U-Boot 2020.01-ayufan-2011-g26eed9fd (Apr 09 2020 - 21:56:23 +0000)
- Model: Pine64 RockPro64
- DRAM: 2 GiB
- PMIC: RK808
- MMC: dwmmc@fe320000: 1, sdhci@fe330000: 0
- Loading Environment from MMC... Card did not respond to voltage select!
- *** Warning - No block device, using default environment
- In: serial
- Out: vidconsole
- Err: vidconsole
- Model: Pine64 RockPro64
- rockchip_dnl_key_pressed: adc_channel_single_shot fail!
- Net: eth0: ethernet@fe300000
- Hit any key to stop autoboot: 0
- Card did not respond to voltage select!
- Card did not respond to voltage select!
- Device 0: unknown device
- scanning bus for devices...
- Target spinup took 0 ms.
- Target spinup took 0 ms.
- Target spinup took 0 ms.
- Target spinup took 0 ms.
- Target spinup took 0 ms.
- AHCI 0001.0301 32 slots 5 ports 6 Gbps 0x1f impl SATA mode
- flags: 64bit ncq stag pm led clo pmp fbss pio slum part ccc apst boh
- Device 0: (0:0) Vendor: ATA Prod.: HGST HTS541010A9 Rev: JA0O
- Type: Hard Disk
- Capacity: 953869.7 MB = 931.5 GB (1953525168 x 512)
- Device 1: (1:0) Vendor: ATA Prod.: ST1000LM024 HN-M Rev: 2BA3
- Type: Hard Disk
- Capacity: 953869.7 MB = 931.5 GB (1953525168 x 512)
- Device 2: (2:0) Vendor: ATA Prod.: KINGSTON SS200S3 Rev: S8FM
- Type: Hard Disk
- Capacity: 28626.1 MB = 27.9 GB (58626288 x 512)
- Device 3: (3:0) Vendor: ATA Prod.: ST2000LM015-2E81 Rev: SDM1
- Type: Hard Disk
- Capacity: 1907729.0 MB = 1863.0 GB (3907029168 x 512)
- Device 4: (4:0) Vendor: ATA Prod.: ST2000LM015-2E81 Rev: SDM1
- Type: Hard Disk
- Capacity: 1907729.0 MB = 1863.0 GB (3907029168 x 512)
- Device 0: (0:0) Vendor: ATA Prod.: HGST HTS541010A9 Rev: JA0O
- Type: Hard Disk
- Capacity: 953869.7 MB = 931.5 GB (1953525168 x 512)
- ... is now current device
- Scanning scsi 0:1...
- Device 1: (1:0) Vendor: ATA Prod.: ST1000LM024 HN-M Rev: 2BA3
- Type: Hard Disk
- Capacity: 953869.7 MB = 931.5 GB (1953525168 x 512)
- ... is now current device
- ** Unrecognized filesystem type **
- Device 2: (2:0) Vendor: ATA Prod.: KINGSTON SS200S3 Rev: S8FM
- Type: Hard Disk
- Capacity: 28626.1 MB = 27.9 GB (58626288 x 512)
- ... is now current device
- Scanning scsi 2:3...
- Found /extlinux/extlinux.conf
- Retrieving file: /extlinux/extlinux.conf
- 937 bytes read in 10 ms (90.8 KiB/s)
- select kernel
- 1: kernel-5.6.0-1132-ayufan-g81043e6e109a
- 2: kernel-5.6.0-1132-ayufan-g81043e6e109a-memtest
- Enter choice: 1: kernel-5.6.0-1132-ayufan-g81043e6e109a
- Retrieving file: /initrd.img-5.6.0-1132-ayufan-g81043e6e109a
- 13257282 bytes read in 220 ms (57.5 MiB/s)
- Retrieving file: /vmlinuz-5.6.0-1132-ayufan-g81043e6e109a
- 22915584 bytes read in 374 ms (58.4 MiB/s)
- append: rw panic=10 init=/sbin/init coherent_pool=1M ethaddr=62:03:b0:d6:dc:b3 4
- Retrieving file: /dtbs/5.6.0-1132-ayufan-g81043e6e109a/rockchip/rk3399-rockpro6b
- 56691 bytes read in 14 ms (3.9 MiB/s)
- ## Flattened Device Tree blob at 01f00000
- Booting using the fdt blob at 0x1f00000
- Loading Ramdisk to 79263000, end 79f07a42 ... OK
- Loading Device Tree to 0000000079252000, end 0000000079262d72 ... OK
- Starting kernel ...
- [ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd034]
- [ 0.000000] Linux version 5.6.0-1132-ayufan-g81043e6e109a (root@runner-f725f0
- [ 0.000000] Machine model: Pine64 RockPro64 v2.1
- [ 0.000000] efi: Getting EFI parameters from FDT:
- [ 0.000000] efi: UEFI not found.
- [ 0.000000] cma: Reserved 64 MiB at 0x000000007c000000
- [ 0.000000] psci: probing for conduit method from DT.
- [ 0.000000] psci: PSCIv1.1 detected in firmware.
- [ 0.000000] psci: Using standard PSCI v0.2 function IDs
- [ 0.000000] psci: MIGRATE_INFO_TYPE not supported.
- [ 0.000000] psci: SMC Calling Convention v1.0
- [ 0.000000] percpu: Embedded 34 pages/cpu s101272 r8192 d29800 u139264
- [ 0.000000] Detected VIPT I-cache on CPU0
- [ 0.000000] CPU features: detected: ARM erratum 845719
- [ 0.000000] CPU features: detected: GIC system register CPU interface
- [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 515592
- [ 0.000000] Kernel command line: rw panic=10 init=/sbin/init coherent_pool=14
- [ 0.000000] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
- [ 0.000000] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes,)
- [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
- [ 0.000000] software IO TLB: mapped [mem 0x3bfff000-0x3ffff000] (64MB)
- [ 0.000000] Memory: 1878640K/2095104K available (14012K kernel code, 1130K r)
- [ 0.000000] random: get_random_u64 called from cache_random_seq_create+0x84/0
- [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1
- [ 0.000000] rcu: Hierarchical RCU implementation.
- [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=6.
- [ 0.000000] Tasks RCU enabled.
- [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 ji.
- [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=6
- [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
- [ 0.000000] GICv3: GIC: Using split EOI/Deactivate mode
- [ 0.000000] GICv3: 256 SPIs implemented
- [ 0.000000] GICv3: 0 Extended SPIs implemented
- [ 0.000000] GICv3: Distributor has no Range Selector support
- [ 0.000000] GICv3: 16 PPIs implemented
- [ 0.000000] GICv3: no VLPI support, no direct LPI support, no RVPEID support
- [ 0.000000] GICv3: CPU0: found redistributor 0 region 0:0x00000000fef00000
- [ 0.000000] ITS [mem 0xfee20000-0xfee3ffff]
- [ 0.000000] ITS@0x00000000fee20000: allocated 65536 Devices @7b080000 (flat,)
- [ 0.000000] ITS: using cache flushing for cmd queue
- [ 0.000000] GICv3: using LPI property table @0x000000007b040000
- [ 0.000000] GIC: using cache flushing for LPI property table
- [ 0.000000] GICv3: CPU0: using allocated LPI pending table @0x000000007b05000
- [ 0.000000] GICv3: GIC: PPI partition interrupt-partition-0[0] { /cpus/cpu@0}
- [ 0.000000] GICv3: GIC: PPI partition interrupt-partition-1[1] { /cpus/cpu@1}
- [ 0.000000] arch_timer: cp15 timer(s) running at 24.00MHz (phys).
- [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycless
- [ 0.000007] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398s
- [ 0.001442] Console: colour dummy device 80x25
- [ 0.002045] printk: console [tty0] enabled
- [ 0.002102] Calibrating delay loop (skipped), value calculated using timer f)
- [ 0.002132] pid_max: default: 32768 minimum: 301
- [ 0.002389] LSM: Security Framework initializing
- [ 0.002422] Yama: becoming mindful.
- [ 0.002537] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes, lin)
- [ 0.002572] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes)
- [ 0.002670] *** VALIDATE tmpfs ***
- [ 0.003385] *** VALIDATE proc ***
- [ 0.003728] *** VALIDATE cgroup ***
- [ 0.003748] *** VALIDATE cgroup2 ***
- [ 0.005123] rcu: Hierarchical SRCU implementation.
- [ 0.007669] Platform MSI: interrupt-controller@fee20000 domain created
- [ 0.008118] PCI/MSI: /interrupt-controller@fee00000/interrupt-controller@feed
- [ 0.008863] EFI services will not be available.
- [ 0.009536] smp: Bringing up secondary CPUs ...
- [ 0.010295] Detected VIPT I-cache on CPU1
- [ 0.010336] GICv3: CPU1: found redistributor 1 region 0:0x00000000fef20000
- [ 0.010352] GICv3: CPU1: using allocated LPI pending table @0x000000007b06000
- [ 0.010403] CPU1: Booted secondary processor 0x0000000001 [0x410fd034]
- [ 0.011180] Detected VIPT I-cache on CPU2
- [ 0.011210] GICv3: CPU2: found redistributor 2 region 0:0x00000000fef40000
- [ 0.011223] GICv3: CPU2: using allocated LPI pending table @0x000000007b07000
- [ 0.011254] CPU2: Booted secondary processor 0x0000000002 [0x410fd034]
- [ 0.011938] Detected VIPT I-cache on CPU3
- [ 0.011965] GICv3: CPU3: found redistributor 3 region 0:0x00000000fef60000
- [ 0.011977] GICv3: CPU3: using allocated LPI pending table @0x000000007b10000
- [ 0.012006] CPU3: Booted secondary processor 0x0000000003 [0x410fd034]
- [ 0.012710] CPU features: detected: EL2 vector hardening
- [ 0.012720] ARM_SMCCC_ARCH_WORKAROUND_1 missing from firmware
- [ 0.012726] CPU features: detected: ARM erratum 1319367
- [ 0.012732] Detected PIPT I-cache on CPU4
- [ 0.012765] GICv3: CPU4: found redistributor 100 region 0:0x00000000fef80000
- [ 0.012778] GICv3: CPU4: using allocated LPI pending table @0x000000007b11000
- [ 0.012812] CPU4: Booted secondary processor 0x0000000100 [0x410fd082]
- [ 0.013548] Detected PIPT I-cache on CPU5
- [ 0.013573] GICv3: CPU5: found redistributor 101 region 0:0x00000000fefa0000
- [ 0.013586] GICv3: CPU5: using allocated LPI pending table @0x000000007b12000
- [ 0.013613] CPU5: Booted secondary processor 0x0000000101 [0x410fd082]
- [ 0.013724] smp: Brought up 1 node, 6 CPUs
- [ 0.014019] SMP: Total of 6 processors activated.
- [ 0.014036] CPU features: detected: 32-bit EL0 Support
- [ 0.014053] CPU features: detected: CRC32 instructions
- [ 0.047693] CPU: All CPU(s) started at EL2
- [ 0.047789] alternatives: patching kernel code
- [ 0.050695] devtmpfs: initialized
- [ 0.062362] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, ms
- [ 0.062407] futex hash table entries: 2048 (order: 5, 131072 bytes, linear)
- [ 0.065742] pinctrl core: initialized pinctrl subsystem
- [ 0.066816] thermal_sys: Registered thermal governor 'fair_share'
- [ 0.066821] thermal_sys: Registered thermal governor 'bang_bang'
- [ 0.066845] thermal_sys: Registered thermal governor 'step_wise'
- [ 0.066862] thermal_sys: Registered thermal governor 'user_space'
- [ 0.066878] thermal_sys: Registered thermal governor 'power_allocator'
- [ 0.067534] DMI not present or invalid.
- [ 0.068412] NET: Registered protocol family 16
- [ 0.071196] DMA: preallocated 1024 KiB pool for atomic allocations
- [ 0.072425] cpuidle: using governor ladder
- [ 0.072491] cpuidle: using governor menu
- [ 0.072976] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
- [ 0.073170] ASID allocator initialised with 65536 entries
- [ 0.073312] Serial: AMBA PL011 UART driver
- [ 0.109805] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
- [ 0.109830] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages
- [ 0.109845] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
- [ 0.109859] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages
- [ 1.587307] cryptd: max_cpu_qlen set to 1000
- [ 1.618472] ACPI: Interpreter disabled.
- [ 1.620054] vcc3v3_pcie: supplied by vcc12v_dcin
- [ 1.621837] vcc5v0_sys: supplied by vcc12v_dcin
- [ 1.622255] vcc5v0_usb: supplied by vcc12v_dcin
- [ 1.622467] vcc3v3_sys: supplied by vcc5v0_sys
- [ 1.623187] iommu: Default domain type: Translated
- [ 1.625660] vgaarb: loaded
- [ 1.626787] SCSI subsystem initialized
- [ 1.627331] usbcore: registered new interface driver usbfs
- [ 1.627402] usbcore: registered new interface driver hub
- [ 1.627532] usbcore: registered new device driver usb
- [ 1.628250] mc: Linux media interface: v0.10
- [ 1.628301] videodev: Linux video capture interface: v2.00
- [ 1.628395] pps_core: LinuxPPS API ver. 1 registered
- [ 1.628412] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giom>
- [ 1.628448] PTP clock support registered
- [ 1.628700] EDAC MC: Ver: 3.0.0
- [ 1.629690] Advanced Linux Sound Architecture Driver Initialized.
- [ 1.630397] NetLabel: Initializing
- [ 1.630415] NetLabel: domain hash size = 128
- [ 1.630428] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
- [ 1.630516] NetLabel: unlabeled traffic allowed by default
- [ 1.631433] clocksource: Switched to clocksource arch_sys_counter
- [ 1.631460] *** VALIDATE bpf ***
- [ 1.631774] VFS: Disk quotas dquot_6.6.0
- [ 1.631870] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
- [ 1.631977] *** VALIDATE ramfs ***
- [ 1.632022] *** VALIDATE hugetlbfs ***
- [ 1.632589] pnp: PnP ACPI: disabled
- [ 1.641829] NET: Registered protocol family 2
- [ 1.642687] tcp_listen_portaddr_hash hash table entries: 1024 (order: 2, 163)
- [ 1.642759] TCP established hash table entries: 16384 (order: 5, 131072 byte)
- [ 1.642988] TCP bind hash table entries: 16384 (order: 6, 262144 bytes, line)
- [ 1.643375] TCP: Hash tables configured (established 16384 bind 16384)
- [ 1.643528] UDP hash table entries: 1024 (order: 3, 32768 bytes, linear)
- [ 1.643621] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes, linear)
- [ 1.643928] NET: Registered protocol family 1
- [ 1.644598] RPC: Registered named UNIX socket transport module.
- [ 1.644619] RPC: Registered udp transport module.
- [ 1.644633] RPC: Registered tcp transport module.
- [ 1.644647] RPC: Registered tcp NFSv4.1 backchannel transport module.
- [ 1.644670] PCI: CLS 0 bytes, default 64
- [ 1.644898] Trying to unpack rootfs image as initramfs...
- [ 2.552250] Freeing initrd memory: 12944K
- [ 2.553526] hw perfevents: enabled with armv8_cortex_a53 PMU driver, 7 counte
- [ 2.553861] hw perfevents: enabled with armv8_cortex_a72 PMU driver, 7 counte
- [ 2.554342] kvm [1]: IPA Size Limit: 40bits
- [ 2.555908] kvm [1]: vgic-v2@fff20000
- [ 2.555947] kvm [1]: GIC system register CPU interface enabled
- [ 2.556147] kvm [1]: vgic interrupt IRQ10
- [ 2.556376] kvm [1]: Hyp mode initialized successfully
- [ 3.509881] debugfs: File ':interrupt-controller@fee00000' in directory 'dom!
- [ 3.509928] debugfs: File ':interrupt-controller@fee00000' in directory 'dom!
- [ 3.509954] debugfs: File ':interrupt-controller@fee00000' in directory 'dom!
- [ 3.509979] debugfs: File ':interrupt-controller@fee00000' in directory 'dom!
- [ 3.510005] debugfs: File ':interrupt-controller@fee00000' in directory 'dom!
- [ 3.510030] debugfs: File ':interrupt-controller@fee00000' in directory 'dom!
- [ 3.510055] debugfs: File ':interrupt-controller@fee00000' in directory 'dom!
- [ 3.510079] debugfs: File ':interrupt-controller@fee00000' in directory 'dom!
- [ 3.510105] debugfs: File ':interrupt-controller@fee00000' in directory 'dom!
- [ 3.510130] debugfs: File ':interrupt-controller@fee00000' in directory 'dom!
- [ 3.510154] debugfs: File ':interrupt-controller@fee00000' in directory 'dom!
- [ 3.510179] debugfs: File ':interrupt-controller@fee00000' in directory 'dom!
- [ 3.510204] debugfs: File ':interrupt-controller@fee00000' in directory 'dom!
- [ 3.510229] debugfs: File ':interrupt-controller@fee00000' in directory 'dom!
- [ 3.510254] debugfs: File ':interrupt-controller@fee00000' in directory 'dom!
- [ 3.513616] workingset: timestamp_bits=46 max_order=19 bucket_order=0
- [ 3.522637] zbud: loaded
- [ 3.525669] *** VALIDATE nfs ***
- [ 3.525770] *** VALIDATE nfs4 ***
- [ 3.525880] NFS: Registering the id_resolver key type
- [ 3.525924] Key type id_resolver registered
- [ 3.525940] Key type id_legacy registered
- [ 3.525964] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
- [ 3.526014] ntfs: driver 2.1.32 [Flags: R/W].
- [ 3.526488] fuse: init (API version 7.31)
- [ 3.526620] *** VALIDATE fuseblk ***
- [ 3.526642] *** VALIDATE fuse ***
- [ 3.527046] SGI XFS with ACLs, security attributes, quota, no debug enabled
- [ 3.529253] *** VALIDATE xfs ***
- [ 3.565694] NET: Registered protocol family 38
- [ 3.565738] Key type asymmetric registered
- [ 3.565754] Asymmetric key parser 'x509' registered
- [ 3.565841] Block layer SCSI generic (bsg) driver version 0.4 loaded (major )
- [ 3.566102] io scheduler mq-deadline registered
- [ 3.566121] io scheduler kyber registered
- [ 3.566381] io scheduler bfq registered
- [ 3.568991] vcc5v0_host: supplied by vcc5v0_usb
- [ 3.578822] rockchip-pcie f8000000.pcie: f8000000.pcie supply vpcie1v8 not fr
- [ 3.578933] rockchip-pcie f8000000.pcie: f8000000.pcie supply vpcie0v9 not fr
- [ 3.623699] rockchip-pcie f8000000.pcie: host bridge /pcie@f8000000 ranges:
- [ 3.623752] rockchip-pcie f8000000.pcie: MEM 0x00fa000000..0x00fbdfffff0
- [ 3.623789] rockchip-pcie f8000000.pcie: IO 0x00fbe00000..0x00fbefffff0
- [ 3.624135] rockchip-pcie f8000000.pcie: PCI host bridge to bus 0000:00
- [ 3.624164] pci_bus 0000:00: root bus resource [bus 00-1f]
- [ 3.624186] pci_bus 0000:00: root bus resource [mem 0xfa000000-0xfbdfffff]
- [ 3.624211] pci_bus 0000:00: root bus resource [io 0x0000-0xfffff] (bus add)
- [ 3.624273] pci 0000:00:00.0: [1d87:0100] type 01 class 0x060400
- [ 3.624416] pci 0000:00:00.0: supports D1
- [ 3.624436] pci 0000:00:00.0: PME# supported from D0 D1 D3hot
- [ 3.630781] pci 0000:00:00.0: bridge configuration invalid ([bus 00-00]), reg
- [ 3.631000] pci 0000:01:00.0: [197b:0585] type 00 class 0x010601
- [ 3.631140] pci 0000:01:00.0: reg 0x10: initial BAR value 0x00000000 invalid
- [ 3.631164] pci 0000:01:00.0: reg 0x10: [io size 0x0080]
- [ 3.631211] pci 0000:01:00.0: reg 0x14: initial BAR value 0x00000000 invalid
- [ 3.631233] pci 0000:01:00.0: reg 0x14: [io size 0x0080]
- [ 3.631280] pci 0000:01:00.0: reg 0x18: initial BAR value 0x00000000 invalid
- [ 3.631301] pci 0000:01:00.0: reg 0x18: [io size 0x0080]
- [ 3.631348] pci 0000:01:00.0: reg 0x1c: initial BAR value 0x00000000 invalid
- [ 3.631369] pci 0000:01:00.0: reg 0x1c: [io size 0x0080]
- [ 3.631451] pci 0000:01:00.0: reg 0x20: initial BAR value 0x00000000 invalid
- [ 3.631475] pci 0000:01:00.0: reg 0x20: [io size 0x0080]
- [ 3.631523] pci 0000:01:00.0: reg 0x24: [mem 0x00000000-0x00001fff]
- [ 3.631573] pci 0000:01:00.0: reg 0x30: [mem 0x00000000-0x0000ffff pref]
- [ 3.631625] pci 0000:01:00.0: Max Payload Size set to 256 (was 128, max 512)
- [ 3.631970] pci 0000:01:00.0: PME# supported from D3hot
- [ 3.632279] pci 0000:01:00.0: 4.000 Gb/s available PCIe bandwidth, limited b)
- [ 3.638489] pci_bus 0000:01: busn_res: [bus 01-1f] end is updated to 01
- [ 3.638540] pci 0000:00:00.0: BAR 14: assigned [mem 0xfa000000-0xfa0fffff]
- [ 3.638572] pci 0000:01:00.0: BAR 6: assigned [mem 0xfa000000-0xfa00ffff pre]
- [ 3.638600] pci 0000:01:00.0: BAR 5: assigned [mem 0xfa010000-0xfa011fff]
- [ 3.638634] pci 0000:01:00.0: BAR 0: no space for [io size 0x0080]
- [ 3.638654] pci 0000:01:00.0: BAR 0: failed to assign [io size 0x0080]
- [ 3.638675] pci 0000:01:00.0: BAR 1: no space for [io size 0x0080]
- [ 3.638695] pci 0000:01:00.0: BAR 1: failed to assign [io size 0x0080]
- [ 3.638716] pci 0000:01:00.0: BAR 2: no space for [io size 0x0080]
- [ 3.638737] pci 0000:01:00.0: BAR 2: failed to assign [io size 0x0080]
- [ 3.638758] pci 0000:01:00.0: BAR 3: no space for [io size 0x0080]
- [ 3.638778] pci 0000:01:00.0: BAR 3: failed to assign [io size 0x0080]
- [ 3.638799] pci 0000:01:00.0: BAR 4: no space for [io size 0x0080]
- [ 3.638819] pci 0000:01:00.0: BAR 4: failed to assign [io size 0x0080]
- [ 3.638842] pci 0000:00:00.0: PCI bridge to [bus 01]
- [ 3.638865] pci 0000:00:00.0: bridge window [mem 0xfa000000-0xfa0fffff]
- [ 3.639104] pcieport 0000:00:00.0: enabling device (0000 -> 0002)
- [ 3.639463] pcieport 0000:00:00.0: PME: Signaling with IRQ 229
- [ 3.639780] pcieport 0000:00:00.0: AER: enabled with IRQ 229
- [ 3.641121] IPMI message handler: version 39.2
- [ 3.643963] dma-pl330 ff6d0000.dma-controller: Loaded driver for PL330 DMAC-0
- [ 3.643996] dma-pl330 ff6d0000.dma-controller: DBUFF-32x8bytes Num_Cha2
- [ 3.645786] dma-pl330 ff6e0000.dma-controller: Loaded driver for PL330 DMAC-0
- [ 3.645817] dma-pl330 ff6e0000.dma-controller: DBUFF-128x8bytes Num_Ch6
- [ 3.647854] pwm-regulator: supplied by regulator-dummy
- [ 3.648112] vcc5v0_typec: supplied by vcc5v0_usb
- [ 3.648998] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
- [ 3.651504] ff180000.serial: ttyS0 at MMIO 0xff180000 (irq = 38, base_baud =A
- [ 3.651718] serial serial0: tty port ttyS0 registered
- [ 3.652402] ff1a0000.serial: ttyS2 at MMIO 0xff1a0000 (irq = 39, base_baud =A
- [ 3.793014] printk: console [ttyS2] enabled
- [ 3.796047] cacheinfo: Unable to detect cache hierarchy for CPU 0
- [ 3.797303] ahci 0000:01:00.0: enabling device (0000 -> 0002)
- [ 3.798395] ahci 0000:01:00.0: SSS flag set, parallel bus scan disabled
- [ 3.799100] ahci 0000:01:00.0: AHCI 0001.0301 32 slots 5 ports 6 Gbps 0x1f ie
- [ 3.799830] ahci 0000:01:00.0: flags: 64bit ncq sntf stag pm led clo pmp fbs
- [ 3.804895] scsi host0: ahci
- [ 3.805685] scsi host1: ahci
- [ 3.806384] scsi host2: ahci
- [ 3.807065] scsi host3: ahci
- [ 3.807737] scsi host4: ahci
- [ 3.808189] ata1: SATA max UDMA/133 abar m8192@0xfa010000 port 0xfa010100 ir0
- [ 3.808857] ata2: SATA max UDMA/133 abar m8192@0xfa010000 port 0xfa010180 ir1
- [ 3.809524] ata3: SATA max UDMA/133 abar m8192@0xfa010000 port 0xfa010200 ir2
- [ 3.810190] ata4: SATA max UDMA/133 abar m8192@0xfa010000 port 0xfa010280 ir3
- [ 3.810855] ata5: SATA max UDMA/133 abar m8192@0xfa010000 port 0xfa010300 ir4
- [ 3.814774] spi-nor spi0.0: gd25q128 (16384 Kbytes)
- [ 3.837387] libphy: Fixed MDIO Bus: probed
- [ 3.843566] OF: graph: no port node found in /syscon@ff770000/usb2-phy@e450/t
- [ 3.851676] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
- [ 3.852272] ehci-pci: EHCI PCI platform driver
- [ 3.852711] ehci-platform: EHCI generic platform driver
- [ 3.855441] ehci-platform fe380000.usb: EHCI Host Controller
- [ 3.856103] ehci-platform fe380000.usb: new USB bus registered, assigned bus1
- [ 3.856910] ehci-platform fe380000.usb: irq 31, io mem 0xfe380000
- [ 3.881454] ehci-platform fe380000.usb: USB 2.0 started, EHCI 1.00
- [ 3.882202] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, b6
- [ 3.882938] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber1
- [ 3.883581] usb usb1: Product: EHCI Host Controller
- [ 3.884017] usb usb1: Manufacturer: Linux 5.6.0-1132-ayufan-g81043e6e109a ehd
- [ 3.884688] usb usb1: SerialNumber: fe380000.usb
- [ 3.885606] hub 1-0:1.0: USB hub found
- [ 3.885972] hub 1-0:1.0: 1 port detected
- [ 3.888812] ehci-platform fe3c0000.usb: EHCI Host Controller
- [ 3.889471] ehci-platform fe3c0000.usb: new USB bus registered, assigned bus2
- [ 3.890263] ehci-platform fe3c0000.usb: irq 33, io mem 0xfe3c0000
- [ 3.911455] ehci-platform fe3c0000.usb: USB 2.0 started, EHCI 1.00
- [ 3.912171] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, b6
- [ 3.912907] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber1
- [ 3.913549] usb usb2: Product: EHCI Host Controller
- [ 3.913985] usb usb2: Manufacturer: Linux 5.6.0-1132-ayufan-g81043e6e109a ehd
- [ 3.914656] usb usb2: SerialNumber: fe3c0000.usb
- [ 3.915472] hub 2-0:1.0: USB hub found
- [ 3.915838] hub 2-0:1.0: 1 port detected
- [ 3.916750] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
- [ 3.917311] ohci-pci: OHCI PCI platform driver
- [ 3.917763] ohci-platform: OHCI generic platform driver
- [ 3.918424] ohci-platform fe3a0000.usb: Generic Platform OHCI controller
- [ 3.919172] ohci-platform fe3a0000.usb: new USB bus registered, assigned bus3
- [ 3.919977] ohci-platform fe3a0000.usb: irq 32, io mem 0xfe3a0000
- [ 3.985646] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001, b6
- [ 3.986382] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber1
- [ 3.987025] usb usb3: Product: Generic Platform OHCI controller
- [ 3.987553] usb usb3: Manufacturer: Linux 5.6.0-1132-ayufan-g81043e6e109a ohd
- [ 3.988224] usb usb3: SerialNumber: fe3a0000.usb
- [ 3.989267] hub 3-0:1.0: USB hub found
- [ 3.989667] hub 3-0:1.0: 1 port detected
- [ 3.990714] ohci-platform fe3e0000.usb: Generic Platform OHCI controller
- [ 3.991594] ohci-platform fe3e0000.usb: new USB bus registered, assigned bus4
- [ 3.992422] ohci-platform fe3e0000.usb: irq 34, io mem 0xfe3e0000
- [ 4.065749] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001, b6
- [ 4.066495] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber1
- [ 4.067145] usb usb4: Product: Generic Platform OHCI controller
- [ 4.067679] usb usb4: Manufacturer: Linux 5.6.0-1132-ayufan-g81043e6e109a ohd
- [ 4.068358] usb usb4: SerialNumber: fe3e0000.usb
- [ 4.069314] hub 4-0:1.0: USB hub found
- [ 4.069691] hub 4-0:1.0: 1 port detected
- [ 4.070814] uhci_hcd: USB Universal Host Controller Interface driver
- [ 4.072553] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
- [ 4.073260] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus n5
- [ 4.074118] xhci-hcd xhci-hcd.0.auto: hcc params 0x0220fe64 hci version 0x110
- [ 4.074985] xhci-hcd xhci-hcd.0.auto: irq 238, io mem 0xfe800000
- [ 4.075907] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002, b6
- [ 4.076652] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber1
- [ 4.077302] usb usb5: Product: xHCI Host Controller
- [ 4.077743] usb usb5: Manufacturer: Linux 5.6.0-1132-ayufan-g81043e6e109a xhd
- [ 4.078422] usb usb5: SerialNumber: xhci-hcd.0.auto
- [ 4.079410] hub 5-0:1.0: USB hub found
- [ 4.079790] hub 5-0:1.0: 1 port detected
- [ 4.080566] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
- [ 4.081227] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus n6
- [ 4.081953] xhci-hcd xhci-hcd.0.auto: Host supports USB 3.0 SuperSpeed
- [ 4.082617] usb usb6: We don't know the algorithms for LPM for this host, di.
- [ 4.083496] usb usb6: New USB device found, idVendor=1d6b, idProduct=0003, b6
- [ 4.084240] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber1
- [ 4.084889] usb usb6: Product: xHCI Host Controller
- [ 4.085331] usb usb6: Manufacturer: Linux 5.6.0-1132-ayufan-g81043e6e109a xhd
- [ 4.086009] usb usb6: SerialNumber: xhci-hcd.0.auto
- [ 4.086983] hub 6-0:1.0: USB hub found
- [ 4.087367] hub 6-0:1.0: 1 port detected
- [ 4.088313] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
- [ 4.088996] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus n7
- [ 4.089855] xhci-hcd xhci-hcd.1.auto: hcc params 0x0220fe64 hci version 0x110
- [ 4.090751] xhci-hcd xhci-hcd.1.auto: irq 239, io mem 0xfe900000
- [ 4.091889] usb usb7: New USB device found, idVendor=1d6b, idProduct=0002, b6
- [ 4.092634] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber1
- [ 4.093284] usb usb7: Product: xHCI Host Controller
- [ 4.093726] usb usb7: Manufacturer: Linux 5.6.0-1132-ayufan-g81043e6e109a xhd
- [ 4.094404] usb usb7: SerialNumber: xhci-hcd.1.auto
- [ 4.095377] hub 7-0:1.0: USB hub found
- [ 4.095755] hub 7-0:1.0: 1 port detected
- [ 4.096498] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
- [ 4.097165] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus n8
- [ 4.097867] xhci-hcd xhci-hcd.1.auto: Host supports USB 3.0 SuperSpeed
- [ 4.098529] usb usb8: We don't know the algorithms for LPM for this host, di.
- [ 4.099398] usb usb8: New USB device found, idVendor=1d6b, idProduct=0003, b6
- [ 4.100141] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber1
- [ 4.100790] usb usb8: Product: xHCI Host Controller
- [ 4.101232] usb usb8: Manufacturer: Linux 5.6.0-1132-ayufan-g81043e6e109a xhd
- [ 4.101934] usb usb8: SerialNumber: xhci-hcd.1.auto
- [ 4.102893] hub 8-0:1.0: USB hub found
- [ 4.103278] hub 8-0:1.0: 1 port detected
- [ 4.104214] usbcore: registered new interface driver uas
- [ 4.104903] usbcore: registered new interface driver usb-storage
- [ 4.105496] usbcore: registered new interface driver ums-alauda
- [ 4.106073] usbcore: registered new interface driver ums-cypress
- [ 4.106658] usbcore: registered new interface driver ums-datafab
- [ 4.107240] usbcore: registered new interface driver ums_eneub6250
- [ 4.107837] usbcore: registered new interface driver ums-freecom
- [ 4.108422] usbcore: registered new interface driver ums-isd200
- [ 4.108997] usbcore: registered new interface driver ums-jumpshot
- [ 4.109587] usbcore: registered new interface driver ums-karma
- [ 4.110161] usbcore: registered new interface driver ums-onetouch
- [ 4.110775] usbcore: registered new interface driver ums-realtek
- [ 4.111361] usbcore: registered new interface driver ums-sddr09
- [ 4.111974] usbcore: registered new interface driver ums-sddr55
- [ 4.112553] usbcore: registered new interface driver ums-usbat
- [ 4.113185] usbcore: registered new interface driver usbserial_generic
- [ 4.113805] usbserial: USB Serial support registered for generic
- [ 4.117266] mousedev: PS/2 mouse device common for all mice
- [ 4.119569] i2c i2c-1: of_i2c: modalias failure on /i2c@ff110000/i2s0
- [ 4.120164] i2c i2c-1: Failed to create I2C device for /i2c@ff110000/i2s0
- [ 4.122836] rk808 0-001b: chip id: 0x0
- [ 4.128199] rk808-regulator rk808-regulator: there is no dvs0 gpio
- [ 4.128793] rk808-regulator rk808-regulator: there is no dvs1 gpio
- [ 4.129420] DCDC_REG1: supplied by vcc5v0_sys
- [ 4.130732] DCDC_REG2: supplied by vcc5v0_sys
- [ 4.131703] DCDC_REG3: supplied by vcc5v0_sys
- [ 4.132393] DCDC_REG4: supplied by vcc5v0_sys
- [ 4.133387] LDO_REG1: supplied by vcc5v0_sys
- [ 4.135046] LDO_REG2: supplied by vcc5v0_sys
- [ 4.136438] LDO_REG3: supplied by vcc5v0_sys
- [ 4.137945] LDO_REG4: supplied by vcc5v0_sys
- [ 4.139458] LDO_REG5: supplied by vcc5v0_sys
- [ 4.140839] LDO_REG6: supplied by vcc5v0_sys
- [ 4.142358] LDO_REG7: supplied by vcc5v0_sys
- [ 4.143733] LDO_REG8: supplied by vcc5v0_sys
- [ 4.145279] SWITCH_REG1: supplied by vcc3v3_sys
- [ 4.145974] SWITCH_REG2: supplied by vcc3v3_sys
- [ 4.150390] rk808-rtc rk808-rtc: registered as rtc0
- [ 4.151682] fan53555-regulator 0-0040: FAN53555 Option[8] Rev[1] Detected!
- [ 4.152323] fan53555-reg: supplied by vcc5v0_sys
- [ 4.154130] vcc1v8_s3: supplied by vcc_1v8
- [ 4.155408] fan53555-regulator 0-0041: FAN53555 Option[8] Rev[1] Detected!
- [ 4.156043] fan53555-reg: supplied by vcc5v0_sys
- [ 4.157524] random: fast init done
- [ 4.159771] typec_fusb302 4-0022: No cable types defined, using default cabls
- [ 4.160538] OF: graph: no port node found in /i2c@ff3d0000/typec-portc@22
- [ 4.168929] device-mapper: uevent: version 1.0.3
- [ 4.170014] device-mapper: ioctl: 4.42.0-ioctl (2020-02-27) initialised: dm-m
- [ 4.172571] energy_model: pd0: hertz/watts ratio non-monotonically decreasin0
- [ 4.178364] sdhci: Secure Digital Host Controller Interface driver
- [ 4.178917] sdhci: Copyright(c) Pierre Ossman
- [ 4.179916] Synopsys Designware Multimedia Card Interface Driver
- [ 4.181410] dwmmc_rockchip fe310000.mmc: IDMAC supports 32-bit address mode.
- [ 4.182073] dwmmc_rockchip fe310000.mmc: Using internal DMA controller.
- [ 4.182665] dwmmc_rockchip fe310000.mmc: Version ID is 270a
- [ 4.183195] dwmmc_rockchip fe310000.mmc: DW MMC controller at irq 28,32 bit o
- [ 4.184181] dwmmc_rockchip fe310000.mmc: allocated mmc-pwrseq
- [ 4.184693] mmc_host mmc0: card is non-removable.
- [ 4.198135] mmc_host mmc0: Bus speed (slot 0) = 400000Hz (slot req 400000Hz,)
- [ 4.212128] dwmmc_rockchip fe320000.mmc: IDMAC supports 32-bit address mode.
- [ 4.212809] dwmmc_rockchip fe320000.mmc: Using internal DMA controller.
- [ 4.213409] dwmmc_rockchip fe320000.mmc: Version ID is 270a
- [ 4.213958] dwmmc_rockchip fe320000.mmc: DW MMC controller at irq 29,32 bit o
- [ 4.214877] dwmmc_rockchip fe320000.mmc: Got CD GPIO
- [ 4.228030] mmc_host mmc1: Bus speed (slot 0) = 400000Hz (slot req 400000Hz,)
- [ 4.242118] sdhci-pltfm: SDHCI platform and OF driver helper
- [ 4.242328] mmc0: queuing unknown CIS tuple 0x80 (2 bytes)
- [ 4.243570] mmc2: CQHCI version 5.10
- [ 4.244685] mmc0: queuing unknown CIS tuple 0x80 (3 bytes)
- [ 4.246736] mmc0: queuing unknown CIS tuple 0x80 (3 bytes)
- [ 4.249969] mmc0: queuing unknown CIS tuple 0x80 (7 bytes)
- [ 4.269437] mmc2: SDHCI controller on fe330000.sdhci [fe330000.sdhci] using A
- [ 4.271507] ledtrig-cpu: registered to indicate activity on CPUs
- [ 4.272461] hid: raw HID events driver (C) Jiri Kosina
- [ 4.273068] usbcore: registered new interface driver usbhid
- [ 4.273564] usbhid: USB HID core driver
- [ 4.274116] hantro-vpu ff650000.video-codec: Adding to iommu group 0
- [ 4.275209] hantro-vpu ff650000.video-codec: registered rockchip,rk3399-vpu-0
- [ 4.276083] hantro-vpu ff650000.video-codec: registered rockchip,rk3399-vpu-1
- [ 4.279802] Initializing XFRM netlink socket
- [ 4.280620] NET: Registered protocol family 10
- [ 4.307798] mmc_host mmc0: Bus speed (slot 0) = 148500000Hz (slot req 150000)
- [ 4.311503] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
- [ 4.313259] ata1.00: ATA-8: HGST HTS541010A9E680, JA0OA560, max UDMA/133
- [ 4.313865] ata1.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 32), AA
- [ 4.315767] ata1.00: configured for UDMA/133
- [ 4.316746] scsi 0:0:0:0: Direct-Access ATA HGST HTS541010A9 A560 P5
- [ 4.318517] sd 0:0:0:0: Attached scsi generic sg0 type 0
- [ 4.318561] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/9)
- [ 4.319677] sd 0:0:0:0: [sda] 4096-byte physical blocks
- [ 4.320234] sd 0:0:0:0: [sda] Write Protect is off
- [ 4.320751] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doeA
- [ 4.321245] Segment Routing with IPv6
- [ 4.321975] mip6: Mobile IPv6
- [ 4.322248] NET: Registered protocol family 17
- [ 4.322937] Key type dns_resolver registered
- [ 4.323998] registered taskstats version 1
- [ 4.324497] zswap: loaded using pool lzo/zbud
- [ 4.325201] Key type ._fscrypt registered
- [ 4.325561] Key type .fscrypt registered
- [ 4.325911] Key type fscrypt-provisioning registered
- [ 4.326430] Key type big_key registered
- [ 4.345545] Key type encrypted registered
- [ 4.359508] sda: sda1
- [ 4.360954] sd 0:0:0:0: [sda] Attached SCSI disk
- [ 4.375639] rk808-rtc rk808-rtc: setting system clock to 2013-01-18T08:50:22)
- [ 4.376412] of_cfs_init
- [ 4.376744] of_cfs_init: OK
- [ 4.377659] ALSA device list:
- [ 4.377933] No soundcards found.
- [ 4.378508] ttyS2 - failed to request DMA
- [ 4.461757] dwmmc_rockchip fe310000.mmc: Successfully tuned phase to 166
- [ 4.469980] mmc0: new ultra high speed SDR104 SDIO card at address 0001
- [ 4.678213] random: crng init done
- [ 4.811530] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
- [ 4.818251] ata2.00: LPM support broken, forcing max_power
- [ 4.818888] ata2.00: ATA-8: ST1000LM024 HN-M101MBB, 2BA30001, max UDMA/133
- [ 4.819518] ata2.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 32)
- [ 4.826332] ata2.00: LPM support broken, forcing max_power
- [ 4.826967] ata2.00: configured for UDMA/133
- [ 4.848073] scsi 1:0:0:0: Direct-Access ATA ST1000LM024 HN-M 0001 P5
- [ 4.849514] scsi 1:0:0:0: Attached scsi generic sg1 type 0
- [ 4.850431] sd 1:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/9)
- [ 4.851113] sd 1:0:0:0: [sdb] 4096-byte physical blocks
- [ 4.851739] sd 1:0:0:0: [sdb] Write Protect is off
- [ 4.852234] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doeA
- [ 5.147259] sdb: sdb1
- [ 5.149913] sd 1:0:0:0: [sdb] Attached SCSI disk
- [ 5.351534] ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
- [ 5.353639] ata3.00: ATA-8: KINGSTON SS200S330G, S8FM05.1, max UDMA/133
- [ 5.354249] ata3.00: 58626288 sectors, multi 16: LBA48 NCQ (depth 32), AA
- [ 5.355381] ata3.00: configured for UDMA/133
- [ 5.356404] scsi 2:0:0:0: Direct-Access ATA KINGSTON SS200S3 05.1 P5
- [ 5.357946] sd 2:0:0:0: Attached scsi generic sg2 type 0
- [ 5.358175] sd 2:0:0:0: [sdc] 58626288 512-byte logical blocks: (30.0 GB/28.)
- [ 5.359176] sd 2:0:0:0: [sdc] Write Protect is off
- [ 5.359693] sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doeA
- [ 5.363127] sdc: sdc1 sdc2 sdc3 sdc4
- [ 5.365313] sd 2:0:0:0: [sdc] Attached SCSI disk
- [ 5.851520] ata4: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
- [ 5.913234] ata4.00: ATA-10: ST2000LM015-2E8174, SDM1, max UDMA/133
- [ 5.913814] ata4.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth 32), AA
- [ 7.823878] ata4.00: configured for UDMA/133
- [ 7.824987] scsi 3:0:0:0: Direct-Access ATA ST2000LM015-2E81 SDM1 P5
- [ 7.826753] sd 3:0:0:0: Attached scsi generic sg3 type 0
- [ 7.827805] sd 3:0:0:0: [sdd] 3907029168 512-byte logical blocks: (2.00 TB/1)
- [ 7.828505] sd 3:0:0:0: [sdd] 4096-byte physical blocks
- [ 7.829029] sd 3:0:0:0: [sdd] Write Protect is off
- [ 7.829565] sd 3:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doeA
- [ 7.884374] sdd: sdd1
- [ 7.887127] sd 3:0:0:0: [sdd] Attached SCSI disk
- [ 8.321524] ata5: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
- [ 8.383203] ata5.00: ATA-10: ST2000LM015-2E8174, SDM1, max UDMA/133
- [ 8.383782] ata5.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth 32), AA
- [ 10.356707] ata5.00: configured for UDMA/133
- [ 10.357734] scsi 4:0:0:0: Direct-Access ATA ST2000LM015-2E81 SDM1 P5
- [ 10.359576] sd 4:0:0:0: Attached scsi generic sg4 type 0
- [ 10.359740] sd 4:0:0:0: [sde] 3907029168 512-byte logical blocks: (2.00 TB/1)
- [ 10.360757] sd 4:0:0:0: [sde] 4096-byte physical blocks
- [ 10.361293] sd 4:0:0:0: [sde] Write Protect is off
- [ 10.361856] sd 4:0:0:0: [sde] Write cache: enabled, read cache: enabled, doeA
- [ 10.417661] sde: sde1 sde2 sde3 sde4
- [ 10.420388] sd 4:0:0:0: [sde] Attached SCSI disk
- [ 10.421543] Freeing unused kernel memory: 1216K
- [ 10.451591] Run /init as init process
- Loading, please wait...
- Starting version 241
- [ 10.755637] rk_gmac-dwmac fe300000.ethernet: IRQ eth_wake_irq not found
- [ 10.756229] rk_gmac-dwmac fe300000.ethernet: IRQ eth_lpi not found
- [ 10.756834] rk_gmac-dwmac fe300000.ethernet: PTP uses main clock
- [ 10.757438] rk_gmac-dwmac fe300000.ethernet: clock input or output? (input).
- [ 10.758055] rk_gmac-dwmac fe300000.ethernet: TX delay(0x28).
- [ 10.758551] rk_gmac-dwmac fe300000.ethernet: RX delay(0x11).
- [ 10.759049] rk_gmac-dwmac fe300000.ethernet: integrated PHY? (no).
- [ 10.759606] rk_gmac-dwmac fe300000.ethernet: cannot get clock clk_mac_speed
- [ 10.760214] rk_gmac-dwmac fe300000.ethernet: clock input from PHY
- [ 10.765750] rk_gmac-dwmac fe300000.ethernet: init for RGMII
- [ 10.781713] rk_gmac-dwmac fe300000.ethernet: User ID: 0x10, Synopsys ID: 0x35
- [ 10.782368] rk_gmac-dwmac fe300000.ethernet: DWMAC1000
- [ 10.782829] rk_gmac-dwmac fe300000.ethernet: DMA HW capability register suppd
- [ 10.783484] rk_gmac-dwmac fe300000.ethernet: RX Checksum Offload Engine suppd
- [ 10.784139] rk_gmac-dwmac fe300000.ethernet: COE Type 2
- [ 10.784596] rk_gmac-dwmac fe300000.ethernet: TX Checksum insertion supported
- [ 10.785213] rk_gmac-dwmac fe300000.ethernet: Wake-Up On Lan supported
- [ 10.785816] rk_gmac-dwmac fe300000.ethernet: Normal descriptors
- [ 10.786336] rk_gmac-dwmac fe300000.ethernet: Ring mode enabled
- [ 10.786846] rk_gmac-dwmac fe300000.ethernet: Enable RX Mitigation via HW Watr
- [ 10.791492] phy phy-ff770000.syscon:usb2-phy@e450.2: charger = USB_DCP_CHARGR
- [ 10.805247] input: gpio-keys as /devices/platform/gpio-keys/input/input0
- [ 10.910314] libphy: stmmac: probed
- [ 10.910643] RTL8211F Gigabit Ethernet stmmac-0:00: attached PHY driver [RTL8)
- [ 10.911768] RTL8211F Gigabit Ethernet stmmac-0:01: attached PHY driver [RTL8)
- Begin: Loading essential drivers ... done.
- Begin: Running /scripts/init-premount ... done.
- Begin: Mounting root file system ... Begin: Running /scripts/local-top ... done.
- Begin: Running /scripts/local-premount ... done.
- Warning: fsck not present, so skipping root file system
- [ 11.344540] EXT4-fs (sde4): mounted filesystem with writeback data mode. Opt)
- done.
- Begin: Running /scripts/local-bottom ... done.
- Begin: Running /scripts/init-bottom ... done.
- [ 12.064267] systemd[1]: System time before build time, advancing clock.
- [ 12.097368] systemd[1]: systemd 241 running in system mode. (+PAM +AUDIT +SE)
- [ 12.099837] systemd[1]: Detected architecture arm64.
- Welcome to Debian GNU/Linux 10 (buster)!
- [ 12.217531] systemd[1]: Set hostname to <rockpro64>.
- [ 12.780820] systemd[1]: Reached target System Time Synchronized.
- [ OK ] Reached target System Time Synchronized.
- [ 12.812108] systemd[1]: Listening on initctl Compatibility Named Pipe.
- [ OK ] Listening on initctl Compatibility Named Pipe.
- [ 12.842506] systemd[1]: Listening on Journal Socket.
- [ OK ] Listening on Journal Socket.
- [ 12.882103] systemd[1]: Starting Restore / save the current clock...
- Starting Restore / save the current clock...
- [ 12.912890] systemd[1]: Created slice system-getty.slice.
- [ OK ] Created slice system-getty.slice.
- [ 12.950063] systemd[1]: Condition check resulted in Create list of required .
- [ 12.952536] systemd[1]: Created slice system-serial\x2dgetty.slice.
- [ OK ] Created slice system-serial\x2dgetty.slice.
- Starting Load Kernel Modules...
- [ OK ] Listening on udev Control Socket.
- Starting Set the console keyboard layout...
- Mounting Huge Pages File System...
- [ OK ] Reached target Swap.
- [ OK ] Listening on udev Kernel Socket.
- Starting udev Coldplug all Devices...
- [ OK ] Listening on fsck to fsckd communication Socket.
- Mounting POSIX Message Queue File System...
- Starting Remount Root and Kernel File Systems...
- [ 13.288381] EXT4-fs (sde4): re-mounted. Opts: (null)
- [ OK ] Set up automount Arbitrary�…s File System Automount Point.
- [ OK ] Started Dispatch Password �…ts to Console Directory Watch.
- [ OK ] Created slice User and Session Slice.
- [ OK ] Reached target Slices.
- [ OK ] Created slice system-systemd\x2dfsck.slice.
- [ OK ] Started Forward Password R�…uests to Wall Directory Watch.
- [ OK ] Reached target Local Encrypted Volumes.
- [ OK ] Listening on Syslog Socket.
- Starting Nameserver information manager...
- [ OK ] Listening on Journal Socket (/dev/log).
- Starting Journal Service...
- Mounting Kernel Debug File System...
- [ OK ] Reached target Paths.
- [ OK ] Reached target Remote File Systems.
- [ OK ] Started Restore / save the current clock.
- [ OK ] Started Load Kernel Modules.
- [ OK ] Started Journal Service.
- [ OK ] Started Set the console keyboard layout.
- [ OK ] Mounted Huge Pages File System.
- [ OK ] Mounted POSIX Message Queue File System.
- [ OK ] Started Remount Root and Kernel File Systems.
- [ OK ] Mounted Kernel Debug File System.
- Starting Rebuild Hardware Database...
- Starting Load/Save Random Seed...
- Starting Create System Users...
- Starting Flush Journal to Persistent Storage...
- Mounting Kernel Configuration File System...
- Starting Apply Kernel Variables...
- Mounting FUSE Control File System...
- [ OK ] Started udev Coldplug all Devices.
- [ OK ] Mounted Kernel Configuration File System.
- [ OK ] Mounted FUSE Control File System.
- Starting Helper to synchronize boot up for ifupdown...
- [ OK ] Started Nameserver information manager.
- [ OK ] Started Apply Kernel Variables.
- [ OK ] Started Load/Save Random Seed.
- [ OK ] Started Helper to synchronize boot up for ifupdown.
- [ 14.431702] systemd-journald[520]: Received request to flush runtime journal1
- [ OK ] Started Flush Journal to Persistent Storage.
- [ OK ] Started Create System Users.
- Starting Create Static Device Nodes in /dev...
- [ OK ] Started Create Static Device Nodes in /dev.
- [ OK ] Reached target Local File Systems (Pre).
- [ OK ] Started Rebuild Hardware Database.
- Starting udev Kernel Device Manager...
- [ OK ] Started udev Kernel Device Manager.
- [ OK ] Found device /dev/ttyS2.
- [ OK ] Found device KINGSTON_SS200S330G boot-efi.
- [ OK ] Found device KINGSTON_SS200S330G linux-boot.
- Starting File System Check�…ev/disk/by-label/linux-boot...
- Starting File System Check�…/dev/disk/by-label/boot-efi...
- [ OK ] Started File System Check Daemon to report status.
- [ OK ] Started File System Check on /dev/disk/by-label/boot-efi.
- [ OK ] Started File System Check �…/dev/disk/by-label/linux-boot.
- Mounting /boot...
- [ 17.131399] EXT4-fs (sde3): mounted filesystem with ordered data mode. Opts:)
- [ 17.132210] ext4 filesystem being mounted at /boot supports timestamps until)
- [ OK ] Mounted /boot.
- Mounting /boot/efi...
- [ OK ] Mounted /boot/efi.
- [ OK ] Reached target Local File Systems.
- Starting Set console font and keymap...
- Starting Create Volatile Files and Directories...
- [ OK ] Started ifup for eth0.
- Starting Raise network interfaces...
- [ OK ] Started Set console font and keymap.
- [ OK ] Started Create Volatile Files and Directories.
- Starting Update UTMP about System Boot/Shutdown...
- [ OK ] Started Update UTMP about System Boot/Shutdown.
- [ OK ] Reached target System Initialization.
- [ OK ] Listening on Avahi mDNS/DNS-SD Stack Activation Socket.
- [ OK ] Listening on D-Bus System Message Bus Socket.
- [ 17.638087] rk_gmac-dwmac fe300000.ethernet eth0: PHY [stmmac-0:00] driver [)
- [ 17.640962] rk_gmac-dwmac fe300000.ethernet eth0: No Safety Features supportd
- [ 17.641754] rk_gmac-dwmac fe300000.ethernet eth0: PTP not supported by HW
- [ 17.642427] rk_gmac-dwmac fe300000.ethernet eth0: configuring for phy/rgmii e
- [ OK ] Reached target Sockets.
- [ OK ] Started Daily rotation of log files.
- [ OK ] Started Daily apt download activities.
- [ OK ] Started Daily Cleanup of Temporary Directories.
- [ OK ] Started Daily apt upgrade and clean activities.
- [ OK ] Reached target Timers.
- [ OK ] Reached target Basic System.
- [ OK ] Started Regular background program processing daemon.
- Starting Start bluetooth on ttyS0...
- Starting Avahi mDNS/DNS-SD Stack...
- Starting Rock 64 First boot...
- Starting Generate SSH keys if not there...
- Starting System Logging Service...
- Starting Resets System Activity Data Collector...
- Starting Login Service...
- [ OK ] Started D-Bus System Message Bus.
- Starting WPA supplicant...
- Starting Network Manager...
- [ OK ] Started Raise network interfaces.
- [ OK ] Started Rock 64 First boot.
- [ OK ] Started Generate SSH keys if not there.
- [ OK ] Started Resets System Activity Data Collector.
- [ 18.161503] rd 0-5: Disabling EAS, schedutil is mandatory
- [ OK ] Started Login Service.
- [ OK ] Started System Logging Service.
- [ OK ] Started Avahi mDNS/DNS-SD Stack.
- [ OK ] Started WPA supplicant.
- [ OK ] Started Network Manager.
- Starting Hostname Service...
- [ OK ] Reached target Network.
- Starting Network Time Service...
- Starting OpenBSD Secure Shell server...
- Starting Permit User Sessions...
- [ OK ] Started Hostname Service.
- [ OK ] Started Network Time Service.
- [ OK ] Started Permit User Sessions.
- [ OK ] Started OpenBSD Secure Shell server.
- Starting Network Manager Script Dispatcher Service...
- [ OK ] Started Serial Getty on ttyS2.
- [ OK ] Started Getty on tty1.
- [ OK ] Reached target Login Prompts.
- [ OK ] Started Network Manager Script Dispatcher Service.
- Starting Authorization Manager...
- [ OK ] Started Authorization Manager.
- [FAILED] Failed to start Start bluetooth on ttyS0.
- See 'systemctl status sdio-hciattach.service' for details.
- [ OK ] Reached target Multi-User System.
- [ OK ] Reached target Graphical Interface.
- Starting Update UTMP about System Runlevel Changes...
- [ OK ] Started Update UTMP about System Runlevel Changes.
- Debian GNU/Linux 10 rockpro64 ttyS2
- rockpro64 login: [ 22.871966] rk_gmac-dwmac fe300000.ethernet eth0: Link is Uf
- [ 22.872751] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement