[    0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd034]
[    0.000000] Linux version 5.6.0-sunxi64 (root@wilson-Inspiron-7580) (gcc version 8.3.0 (GNU Toolchain for the A-profile Architecture 8.3-2019.03 (arm-rel-8.36))) #0
[    0.000000] Machine model: Pine H64 model B
[    0.000000] cma: Reserved 128 MiB at 0x00000000f8000000
[    0.000000] NUMA: No NUMA configuration found
[    0.000000] NUMA: Faking a node at [mem 0x0000000040000000-0x00000000ffffffff]
[    0.000000] NUMA: NODE_DATA [mem 0xf79dc100-0xf79ddfff]
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000040000000-0x000000007fffffff]
[    0.000000]   DMA32    [mem 0x0000000080000000-0x00000000ffffffff]
[    0.000000]   Normal   empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000040000000-0x00000000ffffffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000040000000-0x00000000ffffffff]
[    0.000000] psci: probing for conduit method from DT.
[    0.000000] psci: PSCIv1.1 detected in firmware.
[    0.000000] psci: Using standard PSCI v0.2 function IDs
[    0.000000] psci: MIGRATE_INFO_TYPE not supported.
[    0.000000] psci: SMC Calling Convention v1.0
[    0.000000] percpu: Embedded 22 pages/cpu s49432 r8192 d32488 u90112
[    0.000000] Detected VIPT I-cache on CPU0
[    0.000000] CPU features: detected: ARM erratum 845719
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 774144
[    0.000000] Policy zone: DMA32
[    0.000000] Kernel command line: root=UUID=5c8c4fb8-abed-4408-9e93-79bd7445194e rootwait rootfstype=ext4 console=ttyS0,115200 console=tty1 consoleblank=0 loglevel=1
[    0.000000] printk: log_buf_len individual max cpu contribution: 4096 bytes
[    0.000000] printk: log_buf_len total cpu_extra contributions: 12288 bytes
[    0.000000] printk: log_buf_len min size: 16384 bytes
[    0.000000] printk: log_buf_len: 32768 bytes
[    0.000000] printk: early log buf free: 13876(84%)
[    0.000000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes, linear)
[    0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes, linear)
[    0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
[    0.000000] software IO TLB: mapped [mem 0x7bfff000-0x7ffff000] (64MB)
[    0.000000] Memory: 2859992K/3145728K available (11774K kernel code, 732K rwdata, 3376K rodata, 704K init, 302K bss, 154664K reserved, 131072K cma-reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.000000] rcu: Hierarchical RCU implementation.
[    0.000000] rcu:     RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4.
[    0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
[    0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[    0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
[    0.000000] GIC: Using split EOI/Deactivate mode
[    0.000000] random: get_random_bytes called from start_kernel+0x298/0x41c with crng_init=0
[    0.000000] arch_timer: cp15 timer(s) running at 24.00MHz (phys).
[    0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
[    0.000004] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
[    0.000250] Console: colour dummy device 80x25
[    0.000617] printk: console [tty1] enabled
[    0.000698] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=96000)
[    0.000719] pid_max: default: 32768 minimum: 301
[    0.000811] LSM: Security Framework initializing
[    0.000889] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
[    0.000922] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
[    0.000983] *** VALIDATE tmpfs ***
[    0.001440] *** VALIDATE proc ***
[    0.001669] *** VALIDATE cgroup ***
[    0.001684] *** VALIDATE cgroup2 ***
[    0.002440] rcu: Hierarchical SRCU implementation.
[    0.002906] smp: Bringing up secondary CPUs ...
[    0.003493] Detected VIPT I-cache on CPU1
[    0.003547] CPU1: Booted secondary processor 0x0000000001 [0x410fd034]
[    0.004113] Detected VIPT I-cache on CPU2
[    0.004145] CPU2: Booted secondary processor 0x0000000002 [0x410fd034]
[    0.004607] Detected VIPT I-cache on CPU3
[    0.004635] CPU3: Booted secondary processor 0x0000000003 [0x410fd034]
[    0.004699] smp: Brought up 1 node, 4 CPUs
[    0.004739] SMP: Total of 4 processors activated.
[    0.004750] CPU features: detected: 32-bit EL0 Support
[    0.004761] CPU features: detected: CRC32 instructions
[    0.019572] CPU: All CPU(s) started at EL2
[    0.019604] alternatives: patching kernel code
[    0.021457] devtmpfs: initialized
[    0.025855] Registered cp15_barrier emulation handler
[    0.025883] Registered setend emulation handler
[    0.026080] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[    0.026108] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
[    0.030100] xor: measuring software checksum speed
[    0.068099]    8regs     :  1805.000 MB/sec
[    0.108137]    32regs    :  2071.000 MB/sec
[    0.148187]    arm64_neon:  1701.000 MB/sec
[    0.148198] xor: using function: 32regs (2071.000 MB/sec)
[    0.148259] pinctrl core: initialized pinctrl subsystem
[    0.148689] thermal_sys: Registered thermal governor 'fair_share'
[    0.148693] thermal_sys: Registered thermal governor 'bang_bang'
[    0.148706] thermal_sys: Registered thermal governor 'step_wise'
[    0.148718] thermal_sys: Registered thermal governor 'user_space'
[    0.149623] NET: Registered protocol family 16
[    0.151220] DMA: preallocated 256 KiB pool for atomic allocations
[    0.151244] audit: initializing netlink subsys (disabled)
[    0.151390] audit: type=2000 audit(0.148:1): state=initialized audit_enabled=0 res=1
[    0.151864] cpuidle: using governor menu
[    0.152133] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
[    0.152220] ASID allocator initialised with 65536 entries
[    0.152363] Serial: AMBA PL011 UART driver
[    0.164315] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
[    0.164342] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages
[    0.164355] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[    0.164368] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages
[    0.168109] cryptd: max_cpu_qlen set to 1000
[    0.240327] raid6: neonx8   gen()  1546 MB/s
[    0.308385] raid6: neonx8   xor()  1138 MB/s
[    0.376446] raid6: neonx4   gen()  1563 MB/s
[    0.444509] raid6: neonx4   xor()  1140 MB/s
[    0.512579] raid6: neonx2   gen()  1474 MB/s
[    0.580633] raid6: neonx2   xor()  1028 MB/s
[    0.648705] raid6: neonx1   gen()  1143 MB/s
[    0.716756] raid6: neonx1   xor()   821 MB/s
[    0.784840] raid6: int64x8  gen()  1133 MB/s
[    0.852895] raid6: int64x8  xor()   596 MB/s
[    0.920967] raid6: int64x4  gen()  1266 MB/s
[    0.989021] raid6: int64x4  xor()   645 MB/s
[    1.057080] raid6: int64x2  gen()  1074 MB/s
[    1.125157] raid6: int64x2  xor()   570 MB/s
[    1.193208] raid6: int64x1  gen()   800 MB/s
[    1.261290] raid6: int64x1  xor()   416 MB/s
[    1.261300] raid6: using algorithm neonx4 gen() 1563 MB/s
[    1.261310] raid6: .... xor() 1140 MB/s, rmw enabled
[    1.261320] raid6: using neon recovery algorithm
[    1.261846] iommu: Default domain type: Translated
[    1.262133] SCSI subsystem initialized
[    1.262305] usbcore: registered new interface driver usbfs
[    1.262348] usbcore: registered new interface driver hub
[    1.262407] usbcore: registered new device driver usb
[    1.262654] pps_core: LinuxPPS API ver. 1 registered
[    1.262665] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    1.262690] PTP clock support registered
[    1.264120] clocksource: Switched to clocksource arch_sys_counter
[    1.264335] VFS: Disk quotas dquot_6.6.0
[    1.264394] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    1.264457] *** VALIDATE ramfs ***
[    1.264476] *** VALIDATE hugetlbfs ***
[    1.270299] NET: Registered protocol family 2
[    1.270813] tcp_listen_portaddr_hash hash table entries: 2048 (order: 3, 32768 bytes, linear)
[    1.270886] TCP established hash table entries: 32768 (order: 6, 262144 bytes, linear)
[    1.271166] TCP bind hash table entries: 32768 (order: 7, 524288 bytes, linear)
[    1.271681] TCP: Hash tables configured (established 32768 bind 32768)
[    1.271802] UDP hash table entries: 2048 (order: 4, 65536 bytes, linear)
[    1.271908] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes, linear)
[    1.272223] NET: Registered protocol family 1
[    1.272692] RPC: Registered named UNIX socket transport module.
[    1.272705] RPC: Registered udp transport module.
[    1.272715] RPC: Registered tcp transport module.
[    1.272725] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    1.272927] Trying to unpack rootfs image as initramfs...
[    1.802940] Freeing initrd memory: 9744K
[    1.803787] hw perfevents: enabled with armv8_cortex_a53 PMU driver, 7 counters available
[    1.812833] request_module: kmod_concurrent_max (0) close to 0 (max_modprobes: 50), for module binfmt-4c46, throttling...
[    6.880149] request_module: modprobe binfmt-4c46 cannot be processed, kmod busy with 50 threads for more than 5 seconds now
[    6.889017] request_module: kmod_concurrent_max (0) close to 0 (max_modprobes: 50), for module binfmt-4c46, throttling...
[   12.000153] request_module: modprobe binfmt-4c46 cannot be processed, kmod busy with 50 threads for more than 5 seconds now
[   12.008907] request_module: kmod_concurrent_max (0) close to 0 (max_modprobes: 50), for module binfmt-4c46, throttling...
[   17.120151] request_module: modprobe binfmt-4c46 cannot be processed, kmod busy with 50 threads for more than 5 seconds now
[   17.129018] request_module: kmod_concurrent_max (0) close to 0 (max_modprobes: 50), for module binfmt-4c46, throttling...
[   22.240151] request_module: modprobe binfmt-4c46 cannot be processed, kmod busy with 50 threads for more than 5 seconds now
[   22.248905] request_module: kmod_concurrent_max (0) close to 0 (max_modprobes: 50), for module binfmt-4c46, throttling...
[   27.360153] request_module: modprobe binfmt-4c46 cannot be processed, kmod busy with 50 threads for more than 5 seconds now
[   27.369009] request_module: kmod_concurrent_max (0) close to 0 (max_modprobes: 50), for module binfmt-4c46, throttling...
[   32.480151] request_module: modprobe binfmt-4c46 cannot be processed, kmod busy with 50 threads for more than 5 seconds now
[   32.489011] request_module: kmod_concurrent_max (0) close to 0 (max_modprobes: 50), for module binfmt-4c46, throttling...
[   37.600161] request_module: modprobe binfmt-4c46 cannot be processed, kmod busy with 50 threads for more than 5 seconds now
[   37.609030] request_module: kmod_concurrent_max (0) close to 0 (max_modprobes: 50), for module binfmt-4c46, throttling...
[   42.720151] request_module: modprobe binfmt-4c46 cannot be processed, kmod busy with 50 threads for more than 5 seconds now
[   42.729006] request_module: kmod_concurrent_max (0) close to 0 (max_modprobes: 50), for module binfmt-4c46, throttling...
[   47.840159] request_module: modprobe binfmt-4c46 cannot be processed, kmod busy with 50 threads for more than 5 seconds now
[   47.849035] request_module: kmod_concurrent_max (0) close to 0 (max_modprobes: 50), for module binfmt-4c46, throttling...
[   52.960153] request_module: modprobe binfmt-4c46 cannot be processed, kmod busy with 50 threads for more than 5 seconds now
[   52.969003] request_module: kmod_concurrent_max (0) close to 0 (max_modprobes: 50), for module binfmt-4c46, throttling...
[   58.080153] request_module: modprobe binfmt-4c46 cannot be processed, kmod busy with 50 threads for more than 5 seconds now
[   58.089046] request_module: kmod_concurrent_max (0) close to 0 (max_modprobes: 50), for module binfmt-4c46, throttling...
[   63.200159] request_module: modprobe binfmt-4c46 cannot be processed, kmod busy with 50 threads for more than 5 seconds now
[   63.209129] request_module: kmod_concurrent_max (0) close to 0 (max_modprobes: 50), for module binfmt-4c46, throttling...
[   68.320153] request_module: modprobe binfmt-4c46 cannot be processed, kmod busy with 50 threads for more than 5 seconds now
[   68.328991] request_module: kmod_concurrent_max (0) close to 0 (max_modprobes: 50), for module binfmt-4c46, throttling...
[   73.440160] request_module: modprobe binfmt-4c46 cannot be processed, kmod busy with 50 threads for more than 5 seconds now
[   73.449120] request_module: kmod_concurrent_max (0) close to 0 (max_modprobes: 50), for module binfmt-4c46, throttling...
[   78.560159] request_module: modprobe binfmt-4c46 cannot be processed, kmod busy with 50 threads for more than 5 seconds now
[   78.569010] request_module: kmod_concurrent_max (0) close to 0 (max_modprobes: 50), for module binfmt-4c46, throttling...
[   83.680151] request_module: modprobe binfmt-4c46 cannot be processed, kmod busy with 50 threads for more than 5 seconds now
[   83.689126] request_module: kmod_concurrent_max (0) close to 0 (max_modprobes: 50), for module binfmt-4c46, throttling...
[   88.800152] request_module: modprobe binfmt-4c46 cannot be processed, kmod busy with 50 threads for more than 5 seconds now
[   88.809107] request_module: kmod_concurrent_max (0) close to 0 (max_modprobes: 50), for module binfmt-4c46, throttling...
[   93.920159] request_module: modprobe binfmt-4c46 cannot be processed, kmod busy with 50 threads for more than 5 seconds now
[   93.929037] request_module: kmod_concurrent_max (0) close to 0 (max_modprobes: 50), for module binfmt-4c46, throttling...
[   99.040150] request_module: modprobe binfmt-4c46 cannot be processed, kmod busy with 50 threads for more than 5 seconds now
[   99.049032] request_module: kmod_concurrent_max (0) close to 0 (max_modprobes: 50), for module binfmt-4c46, throttling...
[  104.160152] request_module: modprobe binfmt-4c46 cannot be processed, kmod busy with 50 threads for more than 5 seconds now
[  104.169017] request_module: kmod_concurrent_max (0) close to 0 (max_modprobes: 50), for module binfmt-4c46, throttling...
[  109.280162] request_module: modprobe binfmt-4c46 cannot be processed, kmod busy with 50 threads for more than 5 seconds now
[  109.289052] request_module: kmod_concurrent_max (0) close to 0 (max_modprobes: 50), for module binfmt-4c46, throttling...
[  114.400151] request_module: modprobe binfmt-4c46 cannot be processed, kmod busy with 50 threads for more than 5 seconds now
[  114.409126] request_module: kmod_concurrent_max (0) close to 0 (max_modprobes: 50), for module binfmt-4c46, throttling...
[  119.520152] request_module: modprobe binfmt-4c46 cannot be processed, kmod busy with 50 threads for more than 5 seconds now
[  119.529032] request_module: kmod_concurrent_max (0) close to 0 (max_modprobes: 50), for module binfmt-4c46, throttling...
[  124.640142] request_module: modprobe binfmt-4c46 cannot be processed, kmod busy with 50 threads for more than 5 seconds now
[  124.649021] request_module: kmod_concurrent_max (0) close to 0 (max_modprobes: 50), for module binfmt-4c46, throttling...
[  129.760150] request_module: modprobe binfmt-4c46 cannot be processed, kmod busy with 50 threads for more than 5 seconds now
[  129.769144] request_module: kmod_concurrent_max (0) close to 0 (max_modprobes: 50), for module binfmt-4c46, throttling...
[  134.880153] request_module: modprobe binfmt-4c46 cannot be processed, kmod busy with 50 threads for more than 5 seconds now
[  134.889042] request_module: kmod_concurrent_max (0) close to 0 (max_modprobes: 50), for module binfmt-4c46, throttling...
[  140.000158] request_module: modprobe binfmt-4c46 cannot be processed, kmod busy with 50 threads for more than 5 seconds now
[  140.009060] request_module: kmod_concurrent_max (0) close to 0 (max_modprobes: 50), for module binfmt-4c46, throttling...
[  145.120157] request_module: modprobe binfmt-4c46 cannot be processed, kmod busy with 50 threads for more than 5 seconds now
[  145.129055] request_module: kmod_concurrent_max (0) close to 0 (max_modprobes: 50), for module binfmt-4c46, throttling...
[  150.240150] request_module: modprobe binfmt-4c46 cannot be processed, kmod busy with 50 threads for more than 5 seconds now
[  150.249001] request_module: kmod_concurrent_max (0) close to 0 (max_modprobes: 50), for module binfmt-4c46, throttling...
[  155.360158] request_module: modprobe binfmt-4c46 cannot be processed, kmod busy with 50 threads for more than 5 seconds now
[  155.369037] request_module: kmod_concurrent_max (0) close to 0 (max_modprobes: 50), for module binfmt-4c46, throttling...
[  160.480153] request_module: modprobe binfmt-4c46 cannot be processed, kmod busy with 50 threads for more than 5 seconds now
[  160.489005] request_module: kmod_concurrent_max (0) close to 0 (max_modprobes: 50), for module binfmt-4c46, throttling...
[  165.600151] request_module: modprobe binfmt-4c46 cannot be processed, kmod busy with 50 threads for more than 5 seconds now
[  165.609036] request_module: kmod_concurrent_max (0) close to 0 (max_modprobes: 50), for module binfmt-4c46, throttling...
[  170.720158] request_module: modprobe binfmt-4c46 cannot be processed, kmod busy with 50 threads for more than 5 seconds now
[  170.729150] request_module: kmod_concurrent_max (0) close to 0 (max_modprobes: 50), for module binfmt-4c46, throttling...
[  175.840152] request_module: modprobe binfmt-4c46 cannot be processed, kmod busy with 50 threads for more than 5 seconds now
[  175.849149] request_module: kmod_concurrent_max (0) close to 0 (max_modprobes: 50), for module binfmt-4c46, throttling...
[  180.960158] request_module: modprobe binfmt-4c46 cannot be processed, kmod busy with 50 threads for more than 5 seconds now
[  180.969113] request_module: kmod_concurrent_max (0) close to 0 (max_modprobes: 50), for module binfmt-4c46, throttling...
[  186.080158] request_module: modprobe binfmt-4c46 cannot be processed, kmod busy with 50 threads for more than 5 seconds now
[  186.089125] request_module: kmod_concurrent_max (0) close to 0 (max_modprobes: 50), for module binfmt-4c46, throttling...
[  191.200152] request_module: modprobe binfmt-4c46 cannot be processed, kmod busy with 50 threads for more than 5 seconds now
[  191.209122] request_module: kmod_concurrent_max (0) close to 0 (max_modprobes: 50), for module binfmt-4c46, throttling...
[  196.320150] request_module: modprobe binfmt-4c46 cannot be processed, kmod busy with 50 threads for more than 5 seconds now
[  196.329040] request_module: kmod_concurrent_max (0) close to 0 (max_modprobes: 50), for module binfmt-4c46, throttling...
[  201.440156] request_module: modprobe binfmt-4c46 cannot be processed, kmod busy with 50 threads for more than 5 seconds now
[  201.449019] request_module: kmod_concurrent_max (0) close to 0 (max_modprobes: 50), for module binfmt-4c46, throttling...
[  206.560151] request_module: modprobe binfmt-4c46 cannot be processed, kmod busy with 50 threads for more than 5 seconds now
[  206.569151] request_module: kmod_concurrent_max (0) close to 0 (max_modprobes: 50), for module binfmt-4c46, throttling...
[  211.680151] request_module: modprobe binfmt-4c46 cannot be processed, kmod busy with 50 threads for more than 5 seconds now
[  211.689125] request_module: kmod_concurrent_max (0) close to 0 (max_modprobes: 50), for module binfmt-4c46, throttling...
[  216.800166] request_module: modprobe binfmt-4c46 cannot be processed, kmod busy with 50 threads for more than 5 seconds now
[  216.809137] request_module: kmod_concurrent_max (0) close to 0 (max_modprobes: 50), for module binfmt-4c46, throttling...
[  221.920153] request_module: modprobe binfmt-4c46 cannot be processed, kmod busy with 50 threads for more than 5 seconds now
[  221.929134] request_module: kmod_concurrent_max (0) close to 0 (max_modprobes: 50), for module binfmt-4c46, throttling...
[  227.040151] request_module: modprobe binfmt-4c46 cannot be processed, kmod busy with 50 threads for more than 5 seconds now
[  227.049055] request_module: kmod_concurrent_max (0) close to 0 (max_modprobes: 50), for module binfmt-4c46, throttling...
[  232.160157] request_module: modprobe binfmt-4c46 cannot be processed, kmod busy with 50 threads for more than 5 seconds now
[  232.169129] request_module: kmod_concurrent_max (0) close to 0 (max_modprobes: 50), for module binfmt-4c46, throttling...
[  237.280151] request_module: modprobe binfmt-4c46 cannot be processed, kmod busy with 50 threads for more than 5 seconds now
[  237.289054] request_module: kmod_concurrent_max (0) close to 0 (max_modprobes: 50), for module binfmt-4c46, throttling...
[  242.400150] request_module: modprobe binfmt-4c46 cannot be processed, kmod busy with 50 threads for more than 5 seconds now
[  242.409119] request_module: kmod_concurrent_max (0) close to 0 (max_modprobes: 50), for module binfmt-4c46, throttling...
[  247.520142] request_module: modprobe binfmt-4c46 cannot be processed, kmod busy with 50 threads for more than 5 seconds now
[  247.529150] request_module: kmod_concurrent_max (0) close to 0 (max_modprobes: 50), for module binfmt-4c46, throttling...
[  252.640158] request_module: modprobe binfmt-4c46 cannot be processed, kmod busy with 50 threads for more than 5 seconds now
[  252.649138] request_module: kmod_concurrent_max (0) close to 0 (max_modprobes: 50), for module binfmt-4c46, throttling...
[  257.760151] request_module: modprobe binfmt-4c46 cannot be processed, kmod busy with 50 threads for more than 5 seconds now
[  257.764095] Initialise system trusted keyrings
[  257.764331] workingset: timestamp_bits=44 max_order=20 bucket_order=0
[  257.769845] zbud: loaded
[  257.771158] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[  257.771862] *** VALIDATE nfs ***
[  257.771941] *** VALIDATE nfs4 ***
[  257.772033] NFS: Registering the id_resolver key type
[  257.772065] Key type id_resolver registered
[  257.772075] Key type id_legacy registered
[  257.772092] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[  257.772125] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[  257.773103] 9p: Installing v9fs 9p2000 file system support
[  257.796526] request_module: kmod_concurrent_max (0) close to 0 (max_modprobes: 50), for module binfmt-4c46, throttling...
[  262.880159] request_module: modprobe binfmt-4c46 cannot be processed, kmod busy with 50 threads for more than 5 seconds now
[  262.883234] async_tx: api initialized (async)
[  262.883278] Key type asymmetric registered
[  262.883289] Asymmetric key parser 'x509' registered
[  262.883368] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248)
[  262.883533] io scheduler mq-deadline registered
[  262.883546] io scheduler kyber registered
[  262.883717] io scheduler bfq registered
[  262.884020] sun50i-de2-bus 1000000.bus: Error couldn't map SRAM to device
[  262.884699] sun4i-usb-phy 5100400.phy: Couldn't get regulator usb0_vbus... Deferring probe
[  262.888860] sun50i-h6-r-pinctrl 7022000.pinctrl: initialized sunXi PIO driver
[  262.897550] Serial: 8250/16550 driver, 6 ports, IRQ sharing disabled
[  262.901555] cacheinfo: Unable to detect cache hierarchy for CPU 0
[  262.905962] loop: module loaded
[  262.907220] libphy: Fixed MDIO Bus: probed
[  262.908095] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[  262.908137] ehci-platform: EHCI generic platform driver
[  262.908323] ehci-platform 5101000.usb: EHCI Host Controller
[  262.908354] ehci-platform 5101000.usb: new USB bus registered, assigned bus number 1
[  262.908457] ehci-platform 5101000.usb: irq 27, io mem 0x05101000
[  262.924118] ehci-platform 5101000.usb: USB 2.0 started, EHCI 1.00
[  262.924300] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.06
[  262.924320] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[  262.924336] usb usb1: Product: EHCI Host Controller
[  262.924348] usb usb1: Manufacturer: Linux 5.6.0-sunxi64 ehci_hcd
[  262.924361] usb usb1: SerialNumber: 5101000.usb
[  262.924787] hub 1-0:1.0: USB hub found
[  262.924825] hub 1-0:1.0: 1 port detected
[  262.925334] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[  262.925361] ohci-platform: OHCI generic platform driver
[  262.925510] ohci-platform 5101400.usb: Generic Platform OHCI controller
[  262.925536] ohci-platform 5101400.usb: new USB bus registered, assigned bus number 2
[  262.925650] ohci-platform 5101400.usb: irq 28, io mem 0x05101400
[  262.988376] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.06
[  262.988395] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[  262.988411] usb usb2: Product: Generic Platform OHCI controller
[  262.988424] usb usb2: Manufacturer: Linux 5.6.0-sunxi64 ohci_hcd
[  262.988437] usb usb2: SerialNumber: 5101400.usb
[  262.988803] hub 2-0:1.0: USB hub found
[  262.988840] hub 2-0:1.0: 1 port detected
[  262.989623] usbcore: registered new interface driver usb-storage
[  262.990058] mousedev: PS/2 mouse device common for all mice
[  262.990803] sun6i-rtc 7000000.rtc: registered as rtc0
[  262.990818] sun6i-rtc 7000000.rtc: RTC enabled
[  262.990908] i2c /dev entries driver
[  262.991649] sunxi-wdt 7020400.watchdog: Watchdog enabled (timeout=16 sec, nowayout=0)
[  262.992537] sun50i-cpufreq-nvmem: probe of sun50i-cpufreq-nvmem failed with error -2
[  262.992776] sdhci: Secure Digital Host Controller Interface driver
[  262.992789] sdhci: Copyright(c) Pierre Ossman
[  262.992816] Synopsys Designware Multimedia Card Interface Driver
[  262.993357] sdhci-pltfm: SDHCI platform and OF driver helper
[  262.993497] sun50i-h6-r-pinctrl 7022000.pinctrl: 7022000.pinctrl supply vcc-pl not found, using dummy regulator
[  262.994096] ledtrig-cpu: registered to indicate activity on CPUs
[  262.994396] hid: raw HID events driver (C) Jiri Kosina
[  262.994493] usbcore: registered new interface driver usbhid
[  262.994505] usbhid: USB HID core driver
[  262.995759] NET: Registered protocol family 10
[  263.002176] request_module: kmod_concurrent_max (0) close to 0 (max_modprobes: 50), for module binfmt-4c46, throttling...
[  268.256153] request_module: modprobe binfmt-4c46 cannot be processed, kmod busy with 50 threads for more than 5 seconds now
[  268.264915] request_module: kmod_concurrent_max (0) close to 0 (max_modprobes: 50), for module binfmt-4c46, throttling...
[  273.376149] request_module: modprobe binfmt-4c46 cannot be processed, kmod busy with 50 threads for more than 5 seconds now
[  273.385164] request_module: kmod_concurrent_max (0) close to 0 (max_modprobes: 50), for module binfmt-4c46, throttling...
[  278.496157] request_module: modprobe binfmt-4c46 cannot be processed, kmod busy with 50 threads for more than 5 seconds now
[  278.505123] request_module: kmod_concurrent_max (0) close to 0 (max_modprobes: 50), for module binfmt-4c46, throttling...
[  283.616159] request_module: modprobe binfmt-4c46 cannot be processed, kmod busy with 50 threads for more than 5 seconds now
[  283.625026] request_module: kmod_concurrent_max (0) close to 0 (max_modprobes: 50), for module binfmt-4c46, throttling...
[  288.736149] request_module: modprobe binfmt-4c46 cannot be processed, kmod busy with 50 threads for more than 5 seconds now
[  288.745225] request_module: kmod_concurrent_max (0) close to 0 (max_modprobes: 50), for module binfmt-4c46, throttling...
[  293.856152] request_module: modprobe binfmt-4c46 cannot be processed, kmod busy with 50 threads for more than 5 seconds now
[  293.859399] Segment Routing with IPv6
[  293.859527] NET: Registered protocol family 17
[  293.859716] 8021q: 802.1Q VLAN Support v1.8
[  293.859885] 9pnet: Installing 9P2000 support
[  293.859952] Key type dns_resolver registered
[  293.860467] registered taskstats version 1
[  293.860481] Loading compiled-in X.509 certificates
[  293.860598] zswap: loaded using pool lzo/zbud
[  293.860873] Key type ._fscrypt registered
[  293.860885] Key type .fscrypt registered
[  293.860894] Key type fscrypt-provisioning registered
[  293.861965] Btrfs loaded, crc32c=crc32c-generic
[  293.867705] request_module: kmod_concurrent_max (0) close to 0 (max_modprobes: 50), for module binfmt-4c46, throttling...
[  298.976155] request_module: modprobe binfmt-4c46 cannot be processed, kmod busy with 50 threads for more than 5 seconds now
[  298.985013] request_module: kmod_concurrent_max (0) close to 0 (max_modprobes: 50), for module binfmt-4c46, throttling...
[  304.096148] request_module: modprobe binfmt-4c46 cannot be processed, kmod busy with 50 threads for more than 5 seconds now
[  304.105228] request_module: kmod_concurrent_max (0) close to 0 (max_modprobes: 50), for module binfmt-4c46, throttling...
[  309.216158] request_module: modprobe binfmt-4c46 cannot be processed, kmod busy with 50 threads for more than 5 seconds now
[  309.219344] Key type encrypted registered
[  309.235671] sun50i-h6-pinctrl 300b000.pinctrl: initialized sunXi PIO driver
[  309.235943] sun50i-h6-pinctrl 300b000.pinctrl: 300b000.pinctrl supply vcc-ph not found, using dummy regulator
[  309.236400] printk: console [ttyS0] disabled
[  309.236467] 5000000.serial: ttyS0 at MMIO 0x5000000 (irq = 23, base_baud = 1500000) is a 16550A
[  311.850724] printk: console [ttyS0] enabled
[  311.874580] sun4i-drm display-engine: bound 1100000.mixer (ops 0xffff800010cb11f0)
[  311.882305] sun4i-drm display-engine: bound 6510000.tcon-top (ops 0xffff800010cb5430)
[  311.890379] sun4i-drm display-engine: bound 6515000.lcd-controller (ops 0xffff800010cad6d0)
[  311.898788] sun8i-dw-hdmi 6000000.hdmi: 6000000.hdmi supply hvcc not found, using dummy regulator
[  311.907948] sun8i-dw-hdmi 6000000.hdmi: Detected HDMI TX controller v2.12a with HDCP (DWC HDMI 2.0 TX PHY)
[  311.918034] sun8i-dw-hdmi 6000000.hdmi: registered DesignWare HDMI I2C bus driver
[  311.925789] sun4i-drm display-engine: bound 6000000.hdmi (ops 0xffff800010cb0590)
[  311.933283] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[  311.939900] [drm] No driver support for vblank timestamp query.
[  311.946109] [drm] Initialized sun4i-drm 1.0.0 20150629 for display-engine on minor 0
[  312.060680] random: fast init done
[  312.152681] Console: switching to colour frame buffer device 240x67
[  312.192416] sun4i-drm display-engine: fb0: sun4i-drmdrmfb frame buffer device
[  312.308401] xhci-hcd xhci-hcd.3.auto: xHCI Host Controller
[  312.314052] xhci-hcd xhci-hcd.3.auto: new USB bus registered, assigned bus number 3
[  312.322026] xhci-hcd xhci-hcd.3.auto: hcc params 0x0220f064 hci version 0x100 quirks 0x0000000002010010
[  312.331695] xhci-hcd xhci-hcd.3.auto: irq 29, io mem 0x05200000
[  312.338091] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.06
[  312.346558] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[  312.353955] usb usb3: Product: xHCI Host Controller
[  312.358956] usb usb3: Manufacturer: Linux 5.6.0-sunxi64 xhci-hcd
[  312.365109] usb usb3: SerialNumber: xhci-hcd.3.auto
[  312.370514] hub 3-0:1.0: USB hub found
[  312.374401] hub 3-0:1.0: 1 port detected
[  312.378709] xhci-hcd xhci-hcd.3.auto: xHCI Host Controller
[  312.384345] xhci-hcd xhci-hcd.3.auto: new USB bus registered, assigned bus number 4
[  312.392188] xhci-hcd xhci-hcd.3.auto: Host supports USB 3.0 SuperSpeed
[  312.398929] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
[  312.407321] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.06
[  312.415787] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[  312.423183] usb usb4: Product: xHCI Host Controller
[  312.428184] usb usb4: Manufacturer: Linux 5.6.0-sunxi64 xhci-hcd
[  312.434336] usb usb4: SerialNumber: xhci-hcd.3.auto
[  312.439684] hub 4-0:1.0: USB hub found
[  312.443565] hub 4-0:1.0: 1 port detected
[  312.448361] ehci-platform 5311000.usb: EHCI Host Controller
[  312.454091] ehci-platform 5311000.usb: new USB bus registered, assigned bus number 5
[  312.462131] ehci-platform 5311000.usb: irq 30, io mem 0x05311000
[  312.484123] ehci-platform 5311000.usb: USB 2.0 started, EHCI 1.00
[  312.490500] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.06
[  312.498969] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[  312.506367] usb usb5: Product: EHCI Host Controller
[  312.511367] usb usb5: Manufacturer: Linux 5.6.0-sunxi64 ehci_hcd
[  312.517522] usb usb5: SerialNumber: 5311000.usb
[  312.522535] hub 5-0:1.0: USB hub found
[  312.526411] hub 5-0:1.0: 1 port detected
[  312.531087] ohci-platform 5311400.usb: Generic Platform OHCI controller
[  312.537881] ohci-platform 5311400.usb: new USB bus registered, assigned bus number 6
[  312.545909] ohci-platform 5311400.usb: irq 31, io mem 0x05311400
[  312.612262] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.06
[  312.620728] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[  312.628127] usb usb6: Product: Generic Platform OHCI controller
[  312.634194] usb usb6: Manufacturer: Linux 5.6.0-sunxi64 ohci_hcd
[  312.640349] usb usb6: SerialNumber: 5311400.usb
[  312.653441] hub 6-0:1.0: USB hub found
[  312.665329] hub 6-0:1.0: 1 port detected
[  312.678028] usb_phy_generic usb_phy_generic.4.auto: usb_phy_generic.4.auto supply vcc not found, using dummy regulator
[  312.697673] musb-hdrc musb-hdrc.5.auto: MUSB HDRC host driver
[  312.711719] musb-hdrc musb-hdrc.5.auto: new USB bus registered, assigned bus number 7
[  312.728041] usb usb7: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.06
[  312.744597] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[  312.760043] usb usb7: Product: MUSB HDRC host driver
[  312.773141] usb usb7: Manufacturer: Linux 5.6.0-sunxi64 musb-hcd
[  312.787244] usb usb7: SerialNumber: musb-hdrc.5.auto
[  312.800758] hub 7-0:1.0: USB hub found
[  312.812467] hub 7-0:1.0: 1 port detected
[  312.825150] sun8i-thermal 5070400.thermal-sensor: sensor0 is not calibrated.
[  312.840081] sun8i-thermal 5070400.thermal-sensor: sensor1 is not calibrated.
[  312.855869] sun50i-h6-pinctrl 300b000.pinctrl: 300b000.pinctrl supply vcc-pf not found, using dummy regulator
[  312.874466] sun50i-h6-pinctrl 300b000.pinctrl: Couldn't get bank PC regulator
[  312.889371] sun50i-h6-pinctrl 300b000.pinctrl: request() failed for pin 65
[  312.903905] sun50i-h6-pinctrl 300b000.pinctrl: pin-65 (4022000.mmc) status -517
[  312.918804] sun50i-h6-pinctrl 300b000.pinctrl: could not request pin 65 (PC1) from group PC1  on device 300b000.pinctrl
[  312.937250] sunxi-mmc 4022000.mmc: Error applying setting, reverse things back
[  312.952310] sun50i-h6-pinctrl 300b000.pinctrl: Couldn't get bank PC regulator
[  312.967135] sun50i-h6-pinctrl 300b000.pinctrl: request() failed for pin 80
[  312.981616] sun50i-h6-pinctrl 300b000.pinctrl: pin-80 (300b000.pinctrl:80) status -517
[  312.997825] sun50i-h6-pinctrl 300b000.pinctrl: 300b000.pinctrl supply vcc-pf not found, using dummy regulator
[  313.016132] sun50i-h6-pinctrl 300b000.pinctrl: Couldn't get bank PC regulator
[  313.030923] sun50i-h6-pinctrl 300b000.pinctrl: request() failed for pin 65
[  313.045370] sun50i-h6-pinctrl 300b000.pinctrl: pin-65 (4022000.mmc) status -517
[  313.060238] sun50i-h6-pinctrl 300b000.pinctrl: could not request pin 65 (PC1) from group PC1  on device 300b000.pinctrl
[  313.078664] sunxi-mmc 4022000.mmc: Error applying setting, reverse things back
[  313.093673] sun50i-h6-pinctrl 300b000.pinctrl: Couldn't get bank PC regulator
[  313.108439] sun50i-h6-pinctrl 300b000.pinctrl: request() failed for pin 80
[  313.122884] sun50i-h6-pinctrl 300b000.pinctrl: pin-80 (300b000.pinctrl:80) status -517
[  313.138963] sun6i-rtc 7000000.rtc: hctosys: unable to read the hardware clock
[  313.154534] Freeing unused kernel memory: 704K
[  313.172157] Run /init as init process
[  313.189346] request_module: kmod_concurrent_max (0) close to 0 (max_modprobes: 50), for module binfmt-4c46, throttling...
[  313.272134] usb 6-1: new full-speed USB device number 2 using ohci-platform
[  313.533164] usb 6-1: New USB device found, idVendor=feed, idProduct=1307, bcdDevice= 0.01
[  313.549370] usb 6-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  313.564521] usb 6-1: Product: Ergodox EZ
[  313.576340] usb 6-1: Manufacturer: ZSA
[  313.587894] usb 6-1: SerialNumber: 0
[  313.607154] input: ZSA Ergodox EZ as /devices/platform/soc/5311400.usb/usb6/6-1/6-1:1.0/0003:FEED:1307.0001/input/input0
[  313.684640] hid-generic 0003:FEED:1307.0001: input,hidraw0: USB HID v1.11 Keyboard [ZSA Ergodox EZ] on usb-5311400.usb-1/input0
[  313.705085] sun50i-h6-pinctrl 300b000.pinctrl: 300b000.pinctrl supply vcc-pf not found, using dummy regulator
[  313.724191] sun50i-h6-pinctrl 300b000.pinctrl: Couldn't get bank PC regulator
[  313.739627] sun50i-h6-pinctrl 300b000.pinctrl: request() failed for pin 65
[  313.754792] sun50i-h6-pinctrl 300b000.pinctrl: pin-65 (4022000.mmc) status -517
[  313.770360] sun50i-h6-pinctrl 300b000.pinctrl: could not request pin 65 (PC1) from group PC1  on device 300b000.pinctrl
[  313.789530] sunxi-mmc 4022000.mmc: Error applying setting, reverse things back
[  313.805343] sun50i-h6-pinctrl 300b000.pinctrl: Couldn't get bank PC regulator
[  313.820980] sun50i-h6-pinctrl 300b000.pinctrl: request() failed for pin 80
[  313.836260] sun50i-h6-pinctrl 300b000.pinctrl: pin-80 (300b000.pinctrl:80) status -517
[  313.856054] input: ZSA Ergodox EZ Mouse as /devices/platform/soc/5311400.usb/usb6/6-1/6-1:1.1/0003:FEED:1307.0002/input/input1
[  313.876406] input: ZSA Ergodox EZ System Control as /devices/platform/soc/5311400.usb/usb6/6-1/6-1:1.1/0003:FEED:1307.0002/input/input2
[  313.956376] input: ZSA Ergodox EZ Consumer Control as /devices/platform/soc/5311400.usb/usb6/6-1/6-1:1.1/0003:FEED:1307.0002/input/input3
[  313.977789] input: ZSA Ergodox EZ Keyboard as /devices/platform/soc/5311400.usb/usb6/6-1/6-1:1.1/0003:FEED:1307.0002/input/input4
[  313.998924] hid-generic 0003:FEED:1307.0002: input,hidraw1: USB HID v1.11 Mouse [ZSA Ergodox EZ] on usb-5311400.usb-1/input1
[  314.020070] sun50i-h6-pinctrl 300b000.pinctrl: 300b000.pinctrl supply vcc-pf not found, using dummy regulator
[  314.040012] sun50i-h6-pinctrl 300b000.pinctrl: Couldn't get bank PC regulator
[  314.056389] sun50i-h6-pinctrl 300b000.pinctrl: request() failed for pin 65
[  314.072444] sun50i-h6-pinctrl 300b000.pinctrl: pin-65 (4022000.mmc) status -517
[  314.088848] sun50i-h6-pinctrl 300b000.pinctrl: could not request pin 65 (PC1) from group PC1  on device 300b000.pinctrl
[  314.108829] sunxi-mmc 4022000.mmc: Error applying setting, reverse things back
[  314.125409] sun50i-h6-pinctrl 300b000.pinctrl: Couldn't get bank PC regulator
[  314.141799] sun50i-h6-pinctrl 300b000.pinctrl: request() failed for pin 80
[  314.157902] sun50i-h6-pinctrl 300b000.pinctrl: pin-80 (300b000.pinctrl:80) status -517
[  318.432127] request_module: modprobe binfmt-4c46 cannot be processed, kmod busy with 50 threads for more than 5 seconds now
[  318.441236] request_module: kmod_concurrent_max (0) close to 0 (max_modprobes: 50), for module binfmt-4c46, throttling...
[  323.552146] request_module: modprobe binfmt-4c46 cannot be processed, kmod busy with 50 threads for more than 5 seconds now
[  323.575814] Failed to execute /init (error -8)
[  323.610402] Run /sbin/init as init process
[  323.623918] Run /etc/init as init process
[  323.637275] Run /bin/init as init process
[  323.650533] Run /bin/sh as init process
[  323.669334] request_module: kmod_concurrent_max (0) close to 0 (max_modprobes: 50), for module binfmt-4c46, throttling...
[  328.672144] request_module: modprobe binfmt-4c46 cannot be processed, kmod busy with 50 threads for more than 5 seconds now
[  328.695778] Starting init: /bin/sh exists but couldn't execute it (error -8)
[  328.733262] Kernel panic - not syncing: No working init found.  Try passing init= option to kernel. See Linux Documentation/admin-guide/init.rst for guidance.
[  328.757380] CPU: 2 PID: 1 Comm: swapper/0 Not tainted 5.6.0-sunxi64 #trunk
[  328.774313] Hardware name: Pine H64 model B (DT)
[  328.788884] Call trace:
[  328.801193]  dump_backtrace+0x0/0x1a0
[  328.814727]  show_stack+0x14/0x20
[  328.827890]  dump_stack+0xbc/0x104
[  328.841026]  panic+0x150/0x304
[  328.853651]  kernel_init+0xec/0x100
[  328.866635]  ret_from_fork+0x10/0x1c
[  328.879697] SMP: stopping secondary CPUs
[  328.893090] Kernel Offset: disabled
[  328.905973] CPU features: 0x00002,20002004
[  328.919413] Memory Limit: none
[  328.931798] ---[ end Kernel panic - not syncing: No working init found.  Try passing init= option to kernel. See Linux Documentation/admin-guide/init.rst for guida-