Guest User

SMART data

a guest
May 24th, 2023
146
0
Never
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 18.41 KB | None | 0 0
  1. DRIVE 1:
  2.  
  3. smartctl 7.0 2018-12-30 r4883 [FreeBSD 11.3-RELEASE-p14 amd64] (local build)
  4. Copyright (C) 2002-18, Bruce Allen, Christian Franke, www.smartmontools.org
  5.  
  6. === START OF INFORMATION SECTION ===
  7. Model Family: Western Digital Red
  8. Device Model: WDC WD40EFRX-68N32N0
  9. Serial Number: <REDACTED>
  10. LU WWN Device Id: 5 0014ee 2668524b9
  11. Firmware Version: 82.00A82
  12. User Capacity: 4,000,787,030,016 bytes [4.00 TB]
  13. Sector Sizes: 512 bytes logical, 4096 bytes physical
  14. Rotation Rate: 5400 rpm
  15. Form Factor: 3.5 inches
  16. Device is: In smartctl database [for details use: -P show]
  17. ATA Version is: ACS-3 T13/2161-D revision 5
  18. SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s)
  19. Local Time is: Wed May 24 16:55:58 2023 CDT
  20. SMART support is: Available - device has SMART capability.
  21. SMART support is: Enabled
  22.  
  23. === START OF READ SMART DATA SECTION ===
  24. SMART overall-health self-assessment test result: PASSED
  25.  
  26. General SMART Values:
  27. Offline data collection status: (0x00) Offline data collection activity
  28. was never started.
  29. Auto Offline Data Collection: Disabled.
  30. Self-test execution status: ( 0) The previous self-test routine completed
  31. without error or no self-test has ever
  32. been run.
  33. Total time to complete Offline
  34. data collection: (43380) seconds.
  35. Offline data collection
  36. capabilities: (0x7b) SMART execute Offline immediate.
  37. Auto Offline data collection on/off support.
  38. Suspend Offline collection upon new
  39. command.
  40. Offline surface scan supported.
  41. Self-test supported.
  42. Conveyance Self-test supported.
  43. Selective Self-test supported.
  44. SMART capabilities: (0x0003) Saves SMART data before entering
  45. power-saving mode.
  46. Supports SMART auto save timer.
  47. Error logging capability: (0x01) Error logging supported.
  48. General Purpose Logging supported.
  49. Short self-test routine
  50. recommended polling time: ( 2) minutes.
  51. Extended self-test routine
  52. recommended polling time: ( 461) minutes.
  53. Conveyance self-test routine
  54. recommended polling time: ( 5) minutes.
  55. SCT capabilities: (0x303d) SCT Status supported.
  56. SCT Error Recovery Control supported.
  57. SCT Feature Control supported.
  58. SCT Data Table supported.
  59.  
  60. SMART Attributes Data Structure revision number: 16
  61. Vendor Specific SMART Attributes with Thresholds:
  62. ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
  63. 1 Raw_Read_Error_Rate 0x002f 200 200 051 Pre-fail Always - 0
  64. 3 Spin_Up_Time 0x0027 165 165 021 Pre-fail Always - 6741
  65. 4 Start_Stop_Count 0x0032 100 100 000 Old_age Always - 53
  66. 5 Reallocated_Sector_Ct 0x0033 200 200 140 Pre-fail Always - 0
  67. 7 Seek_Error_Rate 0x002e 200 200 000 Old_age Always - 0
  68. 9 Power_On_Hours 0x0032 065 065 000 Old_age Always - 25573
  69. 10 Spin_Retry_Count 0x0032 100 253 000 Old_age Always - 0
  70. 11 Calibration_Retry_Count 0x0032 100 253 000 Old_age Always - 0
  71. 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 53
  72. 192 Power-Off_Retract_Count 0x0032 200 200 000 Old_age Always - 51
  73. 193 Load_Cycle_Count 0x0032 200 200 000 Old_age Always - 440
  74. 194 Temperature_Celsius 0x0022 108 102 000 Old_age Always - 42
  75. 196 Reallocated_Event_Count 0x0032 200 200 000 Old_age Always - 0
  76. 197 Current_Pending_Sector 0x0032 200 200 000 Old_age Always - 0
  77. 198 Offline_Uncorrectable 0x0030 100 253 000 Old_age Offline - 0
  78. 199 UDMA_CRC_Error_Count 0x0032 200 200 000 Old_age Always - 0
  79. 200 Multi_Zone_Error_Rate 0x0008 100 253 000 Old_age Offline - 0
  80.  
  81. SMART Error Log Version: 1
  82. No Errors Logged
  83.  
  84. SMART Self-test log structure revision number 1
  85. No self-tests have been logged. [To run self-tests, use: smartctl -t]
  86.  
  87. SMART Selective self-test log data structure revision number 1
  88. SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
  89. 1 0 0 Not_testing
  90. 2 0 0 Not_testing
  91. 3 0 0 Not_testing
  92. 4 0 0 Not_testing
  93. 5 0 0 Not_testing
  94. Selective self-test flags (0x0):
  95. After scanning selected spans, do NOT read-scan remainder of disk.
  96. If Selective self-test is pending on power-up, resume after 0 minute delay.
  97.  
  98. DRIVE 2:
  99.  
  100. smartctl 7.0 2018-12-30 r4883 [FreeBSD 11.3-RELEASE-p14 amd64] (local build)
  101. Copyright (C) 2002-18, Bruce Allen, Christian Franke, www.smartmontools.org
  102.  
  103. === START OF INFORMATION SECTION ===
  104. Model Family: Western Digital Red
  105. Device Model: WDC WD40EFRX-68N32N0
  106. Serial Number: <REDACTED>
  107. LU WWN Device Id: 5 0014ee 2bbdae512
  108. Firmware Version: 82.00A82
  109. User Capacity: 4,000,787,030,016 bytes [4.00 TB]
  110. Sector Sizes: 512 bytes logical, 4096 bytes physical
  111. Rotation Rate: 5400 rpm
  112. Form Factor: 3.5 inches
  113. Device is: In smartctl database [for details use: -P show]
  114. ATA Version is: ACS-3 T13/2161-D revision 5
  115. SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s)
  116. Local Time is: Wed May 24 16:55:55 2023 CDT
  117. SMART support is: Available - device has SMART capability.
  118. SMART support is: Enabled
  119.  
  120. === START OF READ SMART DATA SECTION ===
  121. SMART overall-health self-assessment test result: PASSED
  122.  
  123. General SMART Values:
  124. Offline data collection status: (0x00) Offline data collection activity
  125. was never started.
  126. Auto Offline Data Collection: Disabled.
  127. Self-test execution status: ( 0) The previous self-test routine completed
  128. without error or no self-test has ever
  129. been run.
  130. Total time to complete Offline
  131. data collection: (42780) seconds.
  132. Offline data collection
  133. capabilities: (0x7b) SMART execute Offline immediate.
  134. Auto Offline data collection on/off support.
  135. Suspend Offline collection upon new
  136. command.
  137. Offline surface scan supported.
  138. Self-test supported.
  139. Conveyance Self-test supported.
  140. Selective Self-test supported.
  141. SMART capabilities: (0x0003) Saves SMART data before entering
  142. power-saving mode.
  143. Supports SMART auto save timer.
  144. Error logging capability: (0x01) Error logging supported.
  145. General Purpose Logging supported.
  146. Short self-test routine
  147. recommended polling time: ( 2) minutes.
  148. Extended self-test routine
  149. recommended polling time: ( 454) minutes.
  150. Conveyance self-test routine
  151. recommended polling time: ( 5) minutes.
  152. SCT capabilities: (0x303d) SCT Status supported.
  153. SCT Error Recovery Control supported.
  154. SCT Feature Control supported.
  155. SCT Data Table supported.
  156.  
  157. SMART Attributes Data Structure revision number: 16
  158. Vendor Specific SMART Attributes with Thresholds:
  159. ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
  160. 1 Raw_Read_Error_Rate 0x002f 200 200 051 Pre-fail Always - 0
  161. 3 Spin_Up_Time 0x0027 170 169 021 Pre-fail Always - 6491
  162. 4 Start_Stop_Count 0x0032 100 100 000 Old_age Always - 56
  163. 5 Reallocated_Sector_Ct 0x0033 200 200 140 Pre-fail Always - 0
  164. 7 Seek_Error_Rate 0x002e 200 200 000 Old_age Always - 0
  165. 9 Power_On_Hours 0x0032 065 065 000 Old_age Always - 25575
  166. 10 Spin_Retry_Count 0x0032 100 253 000 Old_age Always - 0
  167. 11 Calibration_Retry_Count 0x0032 100 253 000 Old_age Always - 0
  168. 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 56
  169. 192 Power-Off_Retract_Count 0x0032 200 200 000 Old_age Always - 54
  170. 193 Load_Cycle_Count 0x0032 200 200 000 Old_age Always - 413
  171. 194 Temperature_Celsius 0x0022 108 102 000 Old_age Always - 42
  172. 196 Reallocated_Event_Count 0x0032 200 200 000 Old_age Always - 0
  173. 197 Current_Pending_Sector 0x0032 200 200 000 Old_age Always - 0
  174. 198 Offline_Uncorrectable 0x0030 100 253 000 Old_age Offline - 0
  175. 199 UDMA_CRC_Error_Count 0x0032 200 200 000 Old_age Always - 1
  176. 200 Multi_Zone_Error_Rate 0x0008 100 253 000 Old_age Offline - 0
  177.  
  178. SMART Error Log Version: 1
  179. No Errors Logged
  180.  
  181. SMART Self-test log structure revision number 1
  182. No self-tests have been logged. [To run self-tests, use: smartctl -t]
  183.  
  184. SMART Selective self-test log data structure revision number 1
  185. SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
  186. 1 0 0 Not_testing
  187. 2 0 0 Not_testing
  188. 3 0 0 Not_testing
  189. 4 0 0 Not_testing
  190. 5 0 0 Not_testing
  191. Selective self-test flags (0x0):
  192. After scanning selected spans, do NOT read-scan remainder of disk.
  193. If Selective self-test is pending on power-up, resume after 0 minute delay.
  194.  
  195. DRIVE 3:
  196.  
  197. smartctl 7.0 2018-12-30 r4883 [FreeBSD 11.3-RELEASE-p14 amd64] (local build)
  198. Copyright (C) 2002-18, Bruce Allen, Christian Franke, www.smartmontools.org
  199.  
  200. === START OF INFORMATION SECTION ===
  201. Model Family: Western Digital Red
  202. Device Model: WDC WD40EFRX-68N32N0
  203. Serial Number: <REDACTED>
  204. LU WWN Device Id: 5 0014ee 26683b897
  205. Firmware Version: 82.00A82
  206. User Capacity: 4,000,787,030,016 bytes [4.00 TB]
  207. Sector Sizes: 512 bytes logical, 4096 bytes physical
  208. Rotation Rate: 5400 rpm
  209. Form Factor: 3.5 inches
  210. Device is: In smartctl database [for details use: -P show]
  211. ATA Version is: ACS-3 T13/2161-D revision 5
  212. SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s)
  213. Local Time is: Wed May 24 16:55:51 2023 CDT
  214. SMART support is: Available - device has SMART capability.
  215. SMART support is: Enabled
  216.  
  217. === START OF READ SMART DATA SECTION ===
  218. SMART overall-health self-assessment test result: PASSED
  219.  
  220. General SMART Values:
  221. Offline data collection status: (0x00) Offline data collection activity
  222. was never started.
  223. Auto Offline Data Collection: Disabled.
  224. Self-test execution status: ( 0) The previous self-test routine completed
  225. without error or no self-test has ever
  226. been run.
  227. Total time to complete Offline
  228. data collection: (43380) seconds.
  229. Offline data collection
  230. capabilities: (0x7b) SMART execute Offline immediate.
  231. Auto Offline data collection on/off support.
  232. Suspend Offline collection upon new
  233. command.
  234. Offline surface scan supported.
  235. Self-test supported.
  236. Conveyance Self-test supported.
  237. Selective Self-test supported.
  238. SMART capabilities: (0x0003) Saves SMART data before entering
  239. power-saving mode.
  240. Supports SMART auto save timer.
  241. Error logging capability: (0x01) Error logging supported.
  242. General Purpose Logging supported.
  243. Short self-test routine
  244. recommended polling time: ( 2) minutes.
  245. Extended self-test routine
  246. recommended polling time: ( 461) minutes.
  247. Conveyance self-test routine
  248. recommended polling time: ( 5) minutes.
  249. SCT capabilities: (0x303d) SCT Status supported.
  250. SCT Error Recovery Control supported.
  251. SCT Feature Control supported.
  252. SCT Data Table supported.
  253.  
  254. SMART Attributes Data Structure revision number: 16
  255. Vendor Specific SMART Attributes with Thresholds:
  256. ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
  257. 1 Raw_Read_Error_Rate 0x002f 200 200 051 Pre-fail Always - 0
  258. 3 Spin_Up_Time 0x0027 167 166 021 Pre-fail Always - 6608
  259. 4 Start_Stop_Count 0x0032 100 100 000 Old_age Always - 56
  260. 5 Reallocated_Sector_Ct 0x0033 200 200 140 Pre-fail Always - 0
  261. 7 Seek_Error_Rate 0x002e 200 200 000 Old_age Always - 0
  262. 9 Power_On_Hours 0x0032 065 065 000 Old_age Always - 25571
  263. 10 Spin_Retry_Count 0x0032 100 253 000 Old_age Always - 0
  264. 11 Calibration_Retry_Count 0x0032 100 253 000 Old_age Always - 0
  265. 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 56
  266. 192 Power-Off_Retract_Count 0x0032 200 200 000 Old_age Always - 54
  267. 193 Load_Cycle_Count 0x0032 200 200 000 Old_age Always - 401
  268. 194 Temperature_Celsius 0x0022 110 104 000 Old_age Always - 40
  269. 196 Reallocated_Event_Count 0x0032 200 200 000 Old_age Always - 0
  270. 197 Current_Pending_Sector 0x0032 200 200 000 Old_age Always - 0
  271. 198 Offline_Uncorrectable 0x0030 100 253 000 Old_age Offline - 0
  272. 199 UDMA_CRC_Error_Count 0x0032 200 200 000 Old_age Always - 0
  273. 200 Multi_Zone_Error_Rate 0x0008 100 253 000 Old_age Offline - 0
  274.  
  275. SMART Error Log Version: 1
  276. No Errors Logged
  277.  
  278. SMART Self-test log structure revision number 1
  279. No self-tests have been logged. [To run self-tests, use: smartctl -t]
  280.  
  281. SMART Selective self-test log data structure revision number 1
  282. SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
  283. 1 0 0 Not_testing
  284. 2 0 0 Not_testing
  285. 3 0 0 Not_testing
  286. 4 0 0 Not_testing
  287. 5 0 0 Not_testing
  288. Selective self-test flags (0x0):
  289. After scanning selected spans, do NOT read-scan remainder of disk.
  290. If Selective self-test is pending on power-up, resume after 0 minute delay.
  291.  
  292. DRIVE 4:
  293.  
  294. smartctl 7.0 2018-12-30 r4883 [FreeBSD 11.3-RELEASE-p14 amd64] (local build)
  295. Copyright (C) 2002-18, Bruce Allen, Christian Franke, www.smartmontools.org
  296.  
  297. === START OF INFORMATION SECTION ===
  298. Model Family: Western Digital Red
  299. Device Model: WDC WD40EFRX-68N32N0
  300. Serial Number: <REDACTED>
  301. LU WWN Device Id: 5 0014ee 2112fe059
  302. Firmware Version: 82.00A82
  303. User Capacity: 4,000,787,030,016 bytes [4.00 TB]
  304. Sector Sizes: 512 bytes logical, 4096 bytes physical
  305. Rotation Rate: 5400 rpm
  306. Form Factor: 3.5 inches
  307. Device is: In smartctl database [for details use: -P show]
  308. ATA Version is: ACS-3 T13/2161-D revision 5
  309. SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s)
  310. Local Time is: Wed May 24 16:55:41 2023 CDT
  311. SMART support is: Available - device has SMART capability.
  312. SMART support is: Enabled
  313.  
  314. === START OF READ SMART DATA SECTION ===
  315. SMART overall-health self-assessment test result: PASSED
  316.  
  317. General SMART Values:
  318. Offline data collection status: (0x00) Offline data collection activity
  319. was never started.
  320. Auto Offline Data Collection: Disabled.
  321. Self-test execution status: ( 0) The previous self-test routine completed
  322. without error or no self-test has ever
  323. been run.
  324. Total time to complete Offline
  325. data collection: (44640) seconds.
  326. Offline data collection
  327. capabilities: (0x7b) SMART execute Offline immediate.
  328. Auto Offline data collection on/off support.
  329. Suspend Offline collection upon new
  330. command.
  331. Offline surface scan supported.
  332. Self-test supported.
  333. Conveyance Self-test supported.
  334. Selective Self-test supported.
  335. SMART capabilities: (0x0003) Saves SMART data before entering
  336. power-saving mode.
  337. Supports SMART auto save timer.
  338. Error logging capability: (0x01) Error logging supported.
  339. General Purpose Logging supported.
  340. Short self-test routine
  341. recommended polling time: ( 2) minutes.
  342. Extended self-test routine
  343. recommended polling time: ( 473) minutes.
  344. Conveyance self-test routine
  345. recommended polling time: ( 5) minutes.
  346. SCT capabilities: (0x303d) SCT Status supported.
  347. SCT Error Recovery Control supported.
  348. SCT Feature Control supported.
  349. SCT Data Table supported.
  350.  
  351. SMART Attributes Data Structure revision number: 16
  352. Vendor Specific SMART Attributes with Thresholds:
  353. ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
  354. 1 Raw_Read_Error_Rate 0x002f 200 200 051 Pre-fail Always - 0
  355. 3 Spin_Up_Time 0x0027 159 159 021 Pre-fail Always - 7008
  356. 4 Start_Stop_Count 0x0032 100 100 000 Old_age Always - 56
  357. 5 Reallocated_Sector_Ct 0x0033 200 200 140 Pre-fail Always - 0
  358. 7 Seek_Error_Rate 0x002e 200 200 000 Old_age Always - 0
  359. 9 Power_On_Hours 0x0032 065 065 000 Old_age Always - 25576
  360. 10 Spin_Retry_Count 0x0032 100 253 000 Old_age Always - 0
  361. 11 Calibration_Retry_Count 0x0032 100 253 000 Old_age Always - 0
  362. 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 56
  363. 192 Power-Off_Retract_Count 0x0032 200 200 000 Old_age Always - 54
  364. 193 Load_Cycle_Count 0x0032 200 200 000 Old_age Always - 393
  365. 194 Temperature_Celsius 0x0022 112 106 000 Old_age Always - 38
  366. 196 Reallocated_Event_Count 0x0032 200 200 000 Old_age Always - 0
  367. 197 Current_Pending_Sector 0x0032 200 200 000 Old_age Always - 0
  368. 198 Offline_Uncorrectable 0x0030 100 253 000 Old_age Offline - 0
  369. 199 UDMA_CRC_Error_Count 0x0032 200 200 000 Old_age Always - 0
  370. 200 Multi_Zone_Error_Rate 0x0008 100 253 000 Old_age Offline - 0
  371.  
  372. SMART Error Log Version: 1
  373. No Errors Logged
  374.  
  375. SMART Self-test log structure revision number 1
  376. No self-tests have been logged. [To run self-tests, use: smartctl -t]
  377.  
  378. SMART Selective self-test log data structure revision number 1
  379. SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
  380. 1 0 0 Not_testing
  381. 2 0 0 Not_testing
  382. 3 0 0 Not_testing
  383. 4 0 0 Not_testing
  384. 5 0 0 Not_testing
  385. Selective self-test flags (0x0):
  386. After scanning selected spans, do NOT read-scan remainder of disk.
  387. If Selective self-test is pending on power-up, resume after 0 minute delay.
  388.  
  389.  
Advertisement
Add Comment
Please, Sign In to add comment