==== Help - Show & Select USB Port and Baudrate ======================================
GMC Device:
- USB-to-Serial Port:         /dev/ttyUSB0
- Baudrate:                   115200

==== Disconnect GMC Device ===========================================================
No connected GMC Device

==== Disconnect AudioCounter Device ==================================================
No connected Audio Device

==== WARNING: You have not activated any device! =====================================

Neither Logging nor History downloads from device are possible, but
you can work on Log and History data loaded from file.

Devices are activated in the configuration file 'geigerlog.cfg'.

==== GMC Device ======================================================================
Configured Connection:        port:'/dev/ttyUSB0' baud:115200 timeoutR:3.0s timeoutW:1.0s
Connected Device:             'GMC-500+Re 2.24'
Configured Variables:         CPM1st, CPS1st, CPM2nd, CPS2nd
Geiger Tube#1 Sensitivity:    154   CPM/(µSv/h) (= 0.0065 µSv/h/CPM)
Geiger Tube#2 Sensitivity:    2.08  CPM/(µSv/h) (= 0.4808 µSv/h/CPM)
Device Time:                  2021-08-04 04:37:05
Date & Time from computer:    2021-08-04 04:39:44.642
                              Device is slower than computer by 157.2 sec
Device Power State:           ON
Fast Estimate Time:           60 sec. Okay


==== AudioCounter Device =============================================================
Configured Connection:        Default Audio Input
Connected Device:             'AudioCounter'
Configured Variables:         CPM3rd, CPS3rd
Geiger Tube Sensitivity:      154.0 CPM/(µSv/h) (0.0065 µSv/h/CPM)


==== Device Mappings =================================================================
The configuration is determined in the configuration file geigerlog.cfg

Device      :  CPM    CPS    CPM1st CPS1st CPM2nd CPS2nd CPM3rd CPS3rd   T   P   H   X
--------------------------------------------------------------------------------------
GMC         :  -      -      X      X      X      X      -      -        -   -   -   -
Audio       :  -      -      -      -      -      -      X      X        -   -   -   -
Mapping is valid

==== AudioCounter Device Extended ====================================================
Configured Connection:        Default Audio Input
Connected Device:             'AudioCounter'
Configured Variables:         CPM3rd, CPS3rd
Geiger Tube Sensitivity:      154.0 CPM/(µSv/h) (0.0065 µSv/h/CPM)

Sampling Details:
- DEVICE:                     Input:'9', Output:'9'
- FORMAT:                     Input:'int16', Output:'int16'
- CHANNELS (1=Mono,2=Stereo): Input:'1', Output:'1'
- LATENCY [sec]:              Input:'1.0', Output:'1.0'
- Host API Index              0
- RATE:                       44100 (Samples per second)
- CHUNK:                      32 (Samples per read)
- Pulse Height Max            32768 (System reported max signal)
- Pulse Direction             NEGATIVE (negative or positive)
- Pulse Threshold             60% of Pulse Height Max to trigger count
Full Device Query:
  0 bcm2835 Headphones: - (hw:0,0), ALSA (0 in, 8 out)
  1 sysdefault, ALSA (0 in, 128 out)
  2 lavrate, ALSA (0 in, 128 out)
  3 samplerate, ALSA (0 in, 128 out)
  4 speexrate, ALSA (0 in, 128 out)
  5 pulse, ALSA (32 in, 32 out)
  6 upmix, ALSA (0 in, 8 out)
  7 vdownmix, ALSA (0 in, 6 out)
  8 dmix, ALSA (0 in, 2 out)
* 9 default, ALSA (32 in, 32 out)