MajorMar log 2

***********************RESET***********************
RGB to HDMI booted
CPLD board detected
8/12 bit board detected
Using PLLA as the sampling clock
PLLA: 2400.000000 ANA1 = 00144000
PLLA: PDIV=1 NDIV=62 CTRL=0002103e FRAC=524288 DSI0=256 CORE=2 PER=256 CCP2=256
PLLB: 2000.000024 ANA1 = 00144000
PLLB: PDIV=1 NDIV=52 CTRL=00021034 FRAC=87382 ARM=2 SP0=256 SP1=256 SP2=256
PLLC: 2400.000000, ANA1 = 00144000
PLLC: PDIV=1 NDIV=62 CTRL=0002103e FRAC=524288 CORE2=256 CORE1=256 PER=2 CORE0=2
PLLD: 2000.000024 ANA1 = 00144000
PLLD: PDIV=1 NDIV=52 CTRL=00021034 FRAC=87382 DSI0=256 CORE=4 PER=4 DSI1=256
PLLH: 1065.000000 ANA1 = 0000000c
PLLH: PDIV=1 NDIV=55 CTRL=00021037 FRAC=491520 AUX=256 RCAL=256 PIX=1 STS=528127
PLLA: 2400.000000 ANA1 = 00144000
PLLA: PDIV=1 NDIV=62 CTRL=0002103e FRAC=524288 DSI0=256 CORE=256 PER=4 CCP2=256
CPU speed detected as: 1000 Mhz
Keycount = 0
CPLD  Design: 6-12_BIT_RGB
CPLD Version: 9.1
Loading file /Palettes/Atari_800_NTSC.bin
Loading file /Palettes/Atari_800_PAL.bin
Loading file /Palettes/Atom_MKII.bin
Loading file /Palettes/Atom_MKII_Full.bin
Loading file /Palettes/Atom_MKII_Plus.bin
Loading file /Palettes/Colour_Genie_N25.bin
Loading file /Palettes/Colour_Genie_S24.bin
Loading file /Palettes/Colour_Genie_S25.bin
Loading file /Palettes/Commodore_64.bin
Loading file /Palettes/Commodore_64_Rev1.bin
Loading file /Palettes/Dragon-CoCo.bin
Loading file /Palettes/Dragon-CoCo_Emu.bin
Loading file /Palettes/Dragon-CoCo_Full.bin
Loading file /Palettes/MDA-Hercules.bin
Loading file /Palettes/Mono_(2_level).bin
Loading file /Palettes/Mono_(3_level).bin
Loading file /Palettes/Mono_(4_level).bin
Loading file /Palettes/Mono_(6_level).bin
Loading file /Palettes/RGB.bin
Loading file /Palettes/RGBI.bin
Loading file /Palettes/RGBI_(CGA).bin
Loading file /Palettes/RGBI_(Spectrum).bin
Loading file /Palettes/RGBrgb_(Amstrad).bin
Loading file /Palettes/RGBrgb_(Spectrum).bin
Loading file /Palettes/RrGgBb_(EGA).bin
Loading file /Palettes/Spectrum_48K_9Col.bin
Loading file /Palettes/TI-99-4a.bin
Loading file /Palettes/Tea1002.bin
Loading file /Palettes/Test_4_Lvl_B_or_U.bin
Loading file /Palettes/Test_4_Lvl_G_or_Y.bin
Loading file /Palettes/Test_4_Lvl_R_or_V.bin
FOUND RESOLUTION: 1024x600@50Hz
FOUND RESOLUTION: 1024x600@60Hz
FOUND RESOLUTION: 1024x768@50Hz
FOUND RESOLUTION: 1024x768@60Hz
FOUND RESOLUTION: 1280x1024@50Hz
FOUND RESOLUTION: 1280x1024@60Hz
FOUND RESOLUTION: 1280x720@50Hz
FOUND RESOLUTION: 1280x720@60Hz
FOUND RESOLUTION: 1280x800@50Hz
FOUND RESOLUTION: 1280x800@60Hz
FOUND RESOLUTION: 1368x768@50Hz
FOUND RESOLUTION: 1368x768@60Hz
FOUND RESOLUTION: 1600x1200@50Hz
FOUND RESOLUTION: 1600x1200@60Hz
FOUND RESOLUTION: 1680x1050@50Hz
FOUND RESOLUTION: 1680x1050@60Hz
FOUND RESOLUTION: 1920x1080@50Hz
FOUND RESOLUTION: 1920x1080@60Hz
FOUND RESOLUTION: 1920x1200@50Hz
FOUND RESOLUTION: 1920x1200@60Hz
FOUND RESOLUTION: 2560x1440@50Hz
FOUND RESOLUTION: 2560x1440@60Hz
FOUND RESOLUTION: 640x480@50Hz
FOUND RESOLUTION: 640x480@60Hz
FOUND RESOLUTION: 720x576@50Hz
FOUND RESOLUTION: 800x480@50Hz
FOUND RESOLUTION: 800x480@60Hz
FOUND RESOLUTION: 800x600@50Hz
FOUND RESOLUTION: 800x600@60Hz
FOUND RESOLUTION: Auto@50Hz-60Hz
FOUND RESOLUTION: Auto@Unlimited
FOUND RESOLUTION: Default@60Hz
FOUND RESOLUTION: Default@EDID
Standard EDID lowest vertical refresh detected as 58 Hz
Reading EDID extension block #1
EIA/CEA-861 EDID SVD lowest vertical refresh detected as 58 Hz
Lowest vertical frequency supported by monitor = 58 Hz
Loading file /config.txt
Read force_genlock_range: 1
Read resolution: Default@EDID
Match resolution: 32 Default@EDID
Read scaling: 0
Setting 4:3 soft
Read scaling_kernel: 2
Read interface_4 = 3
Loading file: /Profiles/6-12_BIT_RGB/Default.txt
FOUND PROFILE: Acorn_Atom_TTL
FOUND PROFILE: Acorn_Electron
FOUND SUB-FOLDER: Amiga
FOUND PROFILE: Aquarius
FOUND SUB-FOLDER: Atari_ST
FOUND PROFILE: Camputers_Lynx
FOUND SUB-FOLDER: Colour Test
FOUND PROFILE: Colour_Genie
FOUND PROFILE: Commodore_128-80col
FOUND PROFILE: Custom
FOUND SUB-FOLDER: Oak_OTIVGA
FOUND PROFILE: Olivetti Prodest-PC1
FOUND PROFILE: Oric
FOUND PROFILE: RML_480Z
FOUND PROFILE: Sinclair_QL
FOUND PROFILE: Spectrum_128_+2
FOUND SUB-FOLDER: Standard_PC
FOUND PROFILE: Teletext
FOUND SUB-FOLDER: Tseng_ET3000AX
FOUND PROFILE: ZX80
Loading file /profile_6-12_BIT_RGB.txt
Setting profile to 16
Loading file: /Profiles/6-12_BIT_RGB/Standard_PC/Default.txt
Loading file: /Saved_Profiles/6-12_BIT_RGB/Standard_PC/CGA.txt
Autoswitch timings 0 (CGA) = 63408, 63695, 63981, 262, 3
Loading file: /Profiles/6-12_BIT_RGB/Standard_PC/EGA.txt
Autoswitch timings 1 (EGA) = 45558, 45764, 45969, 365, 1
Loading file: /Profiles/6-12_BIT_RGB/Standard_PC/Hercules_Gfx.txt
Autoswitch timings 2 (Hercules_Gfx) = 53757, 54000, 54243, 370, 3
Loading file: /Profiles/6-12_BIT_RGB/Standard_PC/Hercules_Txt.txt
Autoswitch timings 3 (Hercules_Txt) = 54876, 55125, 55373, 370, 3
Loading file: /Profiles/6-12_BIT_RGB/Standard_PC/MDA.txt
Autoswitch timings 4 (MDA) = 54008, 54253, 54497, 370, 3
Jit0
Setting subprofile to 0
Profile = Standard_PC
Analyze Csync: polarity unchanged (non-inverted)
Detected polarity state at startup = InvComp (Separate H & V CPLD)
Keycount = 0
-----------------------LOOP------------------------
Detected screen size = 1440x900
Setting 4:3 soft
Analyze Csync: polarity changed to inverted
Detected polarity state = 3, +H+V (Separate H & V CPLD)
        clkinfo.clock = 14318181 Hz
     clkinfo.line_len = 912
    clkinfo.clock_ppm = 4500 ppm
    Nominal 100 lines = 6369500 ns
     Actual 100 lines = 6369741 ns
          Clock error = 37 PPM
 Error adjusted clock = 14317639 Hz
 Target PLL frequency = 2061740040 Hz, prediv = 1, PER = 4
 Actual PLL frequency = 2061740040 Hz
        GPCLK Divisor = 6
Vsync retry count = 0
      Lines per frame = 262, (262)
Actual frame time = 16688720 ns (non-interlaced), line time = 63697 ns
Window: H = 63409 to 63981, V = 16613158 to 16763022, S = +H+V
Looking for autoswitch match = 63697, 262, 262, 3
Autoswitch match: CGA (0) = 63408, 63981, 262, 3
Setting subprofile to 0
Detected screen size = 1440x900
Setting 4:3 soft
Analyze Csync: polarity unchanged (inverted)
Detected polarity state = 3, +H+V (Separate H & V CPLD)
        clkinfo.clock = 14318181 Hz
     clkinfo.line_len = 912
    clkinfo.clock_ppm = 4500 ppm
    Nominal 100 lines = 6369500 ns
     Actual 100 lines = 6369779 ns
          Clock error = 43 PPM
 Error adjusted clock = 14317553 Hz
 Target PLL frequency = 2061727752 Hz, prediv = 1, PER = 4
 Actual PLL frequency = 2061727752 Hz
        GPCLK Divisor = 6
Vsync retry count = 0
      Lines per frame = 262, (262.001)
Actual frame time = 16688679 ns (non-interlaced), line time = 63696 ns
Window: H = 63409 to 63981, V = 16613158 to 16763022, S = +H+V
Width or Height differ from last FB: Setting dummy 64x64 framebuffer
Overscan L=0, R=0, T=0, B=0
Initialised Framebuffer
Size: 882x468 (requested 882x468)
Pitch: 896 bytes
Framebuffer address: DE000000
RAM benchmark: Main memory = 800579 ns, Screen memory = 26429066 ns
Locked
*PLL
Timing exceeds window: H = 127412, V = 16688702, Lines = 131, VSync = 0
-----------------------LOOP------------------------
Detected screen size = 1440x900
Setting 4:3 soft
Analyze Csync: polarity unchanged (inverted)
Detected polarity state = 3, +H+V (Separate H & V CPLD)
        clkinfo.clock = 14318181 Hz
     clkinfo.line_len = 912
    clkinfo.clock_ppm = 4500 ppm
    Nominal 100 lines = 6369500 ns
     Actual 100 lines = 6369699 ns
          Clock error = 31 PPM
 Error adjusted clock = 14317733 Hz
 Target PLL frequency = 2061753648 Hz, prediv = 1, PER = 4
 Actual PLL frequency = 2061753648 Hz
        GPCLK Divisor = 6
Vsync retry count = 0
      Lines per frame = 262, (262)
Actual frame time = 16688791 ns (non-interlaced), line time = 63697 ns
Window: H = 63409 to 63981, V = 16613158 to 16763022, S = +H+V
Looking for autoswitch match = 63697, 262, 262, 3
Autoswitch match: CGA (0) = 63408, 63981, 262, 3
Setting subprofile to 0
Detected screen size = 1440x900
Setting 4:3 soft
Analyze Csync: polarity unchanged (inverted)
Detected polarity state = 3, +H+V (Separate H & V CPLD)
        clkinfo.clock = 14318181 Hz
     clkinfo.line_len = 912
    clkinfo.clock_ppm = 4500 ppm
    Nominal 100 lines = 6369500 ns
     Actual 100 lines = 6369741 ns
          Clock error = 37 PPM
 Error adjusted clock = 14317639 Hz
 Target PLL frequency = 2061740040 Hz, prediv = 1, PER = 4
 Actual PLL frequency = 2061740040 Hz
        GPCLK Divisor = 6
Vsync retry count = 0
      Lines per frame = 262, (262)
Actual frame time = 16688597 ns (non-interlaced), line time = 63696 ns
Window: H = 63409 to 63981, V = 16613158 to 16763022, S = +H+V
Width or Height differ from last FB: Setting dummy 64x64 framebuffer
Overscan L=0, R=0, T=0, B=0
Initialised Framebuffer
Size: 882x468 (requested 882x468)
Pitch: 896 bytes
Framebuffer address: DE000000
RAM benchmark: Main memory = 800168 ns, Screen memory = 26429506 ns
Locked
*PLL
Timing exceeds window: H = 127450, V = 16688679, Lines = 131, VSync = 0
-----------------------LOOP------------------------
Detected screen size = 1440x900
Setting 4:3 soft
Analyze Csync: polarity unchanged (inverted)
Detected polarity state = 3, +H+V (Separate H & V CPLD)
        clkinfo.clock = 14318181 Hz
     clkinfo.line_len = 912
    clkinfo.clock_ppm = 4500 ppm
    Nominal 100 lines = 6369500 ns
     Actual 100 lines = 6369722 ns
          Clock error = 34 PPM
 Error adjusted clock = 14317681 Hz
 Target PLL frequency = 2061746184 Hz, prediv = 1, PER = 4
 Actual PLL frequency = 2061746184 Hz
        GPCLK Divisor = 6
Vsync retry count = 0
      Lines per frame = 262, (262)
Actual frame time = 16688696 ns (non-interlaced), line time = 63697 ns
Window: H = 63409 to 63981, V = 16613158 to 16763022, S = +H+V
Looking for autoswitch match = 63697, 262, 262, 3
Autoswitch match: CGA (0) = 63408, 63981, 262, 3
Setting subprofile to 0
Detected screen size = 1440x900
Setting 4:3 soft
Analyze Csync: polarity unchanged (inverted)
Detected polarity state = 3, +H+V (Separate H & V CPLD)
        clkinfo.clock = 14318181 Hz
     clkinfo.line_len = 912
    clkinfo.clock_ppm = 4500 ppm
    Nominal 100 lines = 6369500 ns
     Actual 100 lines = 6369754 ns
          Clock error = 39 PPM
 Error adjusted clock = 14317610 Hz
 Target PLL frequency = 2061735840 Hz, prediv = 1, PER = 4
 Actual PLL frequency = 2061735840 Hz
        GPCLK Divisor = 6
Vsync retry count = 0
      Lines per frame = 262, (261.999)
Actual frame time = 16688686 ns (non-interlaced), line time = 63697 ns
Window: H = 63409 to 63981, V = 16613158 to 16763022, S = +H+V
Width or Height differ from last FB: Setting dummy 64x64 framebuffer
Overscan L=0, R=0, T=0, B=0
Initialised Framebuffer
Size: 882x468 (requested 882x468)
Pitch: 896 bytes
Framebuffer address: DE000000
RAM benchmark: Main memory = 799696 ns, Screen memory = 26453498 ns
Locked
*PLL
Timing exceeds window: H = 127340, V = 16688739, Lines = 131, VSync = 0
-----------------------LOOP------------------------
Detected screen size = 1440x900
Setting 4:3 soft
Analyze Csync: polarity unchanged (inverted)
Detected polarity state = 3, +H+V (Separate H & V CPLD)
        clkinfo.clock = 14318181 Hz
     clkinfo.line_len = 912
    clkinfo.clock_ppm = 4500 ppm
    Nominal 100 lines = 6369500 ns
     Actual 100 lines = 6369761 ns
          Clock error = 40 PPM
 Error adjusted clock = 14317594 Hz
 Target PLL frequency = 2061733560 Hz, prediv = 1, PER = 4
 Actual PLL frequency = 2061733560 Hz
        GPCLK Divisor = 6
Vsync retry count = 0
      Lines per frame = 262, (262)
Actual frame time = 16688637 ns (non-interlaced), line time = 63697 ns
Window: H = 63409 to 63981, V = 16613158 to 16763022, S = +H+V
Looking for autoswitch match = 63697, 262, 262, 3
Autoswitch match: CGA (0) = 63408, 63981, 262, 3
Setting subprofile to 0
Detected screen size = 1440x900
Setting 4:3 soft
Analyze Csync: polarity unchanged (inverted)
Detected polarity state = 3, +H+V (Separate H & V CPLD)
        clkinfo.clock = 14318181 Hz
     clkinfo.line_len = 912
    clkinfo.clock_ppm = 4500 ppm
    Nominal 100 lines = 6369500 ns
     Actual 100 lines = 6369774 ns
          Clock error = 43 PPM
 Error adjusted clock = 14317565 Hz
 Target PLL frequency = 2061729360 Hz, prediv = 1, PER = 4
 Actual PLL frequency = 2061729360 Hz
        GPCLK Divisor = 6
Vsync retry count = 0
      Lines per frame = 262, (261.997)
Actual frame time = 16688664 ns (non-interlaced), line time = 63697 ns
Window: H = 63409 to 63981, V = 16613158 to 16763022, S = +H+V
Width or Height differ from last FB: Setting dummy 64x64 framebuffer
Overscan L=0, R=0, T=0, B=0
Initialised Framebuffer
Size: 882x468 (requested 882x468)
Pitch: 896 bytes
Framebuffer address: DE000000
RAM benchmark: Main memory = 799493 ns, Screen memory = 26456623 ns
Locked
*PLL
Timing exceeds window: H = 127450, V = 16688693, Lines = 131, VSync = 0
-----------------------LOOP------------------------
Detected screen size = 1440x900
Setting 4:3 soft
Analyze Csync: polarity unchanged (inverted)
Detected polarity state = 3, +H+V (Separate H & V CPLD)
        clkinfo.clock = 14318181 Hz
     clkinfo.line_len = 912
    clkinfo.clock_ppm = 4500 ppm
    Nominal 100 lines = 6369500 ns
     Actual 100 lines = 6369701 ns
          Clock error = 31 PPM
 Error adjusted clock = 14317729 Hz
 Target PLL frequency = 2061753000 Hz, prediv = 1, PER = 4
 Actual PLL frequency = 2061753000 Hz
        GPCLK Divisor = 6
Vsync retry count = 0
      Lines per frame = 262, (261.999)
Actual frame time = 16688680 ns (non-interlaced), line time = 63697 ns
Window: H = 63409 to 63981, V = 16613158 to 16763022, S = +H+V
Looking for autoswitch match = 63697, 262, 262, 3
Autoswitch match: CGA (0) = 63408, 63981, 262, 3
Setting subprofile to 0
Detected screen size = 1440x900
Setting 4:3 soft
Analyze Csync: polarity unchanged (inverted)
Detected polarity state = 3, +H+V (Separate H & V CPLD)
        clkinfo.clock = 14318181 Hz
     clkinfo.line_len = 912
    clkinfo.clock_ppm = 4500 ppm
    Nominal 100 lines = 6369500 ns
     Actual 100 lines = 6369741 ns
          Clock error = 37 PPM
 Error adjusted clock = 14317639 Hz
 Target PLL frequency = 2061740040 Hz, prediv = 1, PER = 4
 Actual PLL frequency = 2061740040 Hz
        GPCLK Divisor = 6
Vsync retry count = 0
      Lines per frame = 262, (261.999)
Actual frame time = 16688701 ns (non-interlaced), line time = 63697 ns
Window: H = 63409 to 63981, V = 16613158 to 16763022, S = +H+V
Width or Height differ from last FB: Setting dummy 64x64 framebuffer
Overscan L=0, R=0, T=0, B=0
Initialised Framebuffer
Size: 882x468 (requested 882x468)
Pitch: 896 bytes
Framebuffer address: DE000000
RAM benchmark: Main memory = 799579 ns, Screen memory = 26431219 ns
Locked
*PLL
Timing exceeds window: H = 127380, V = 16688691, Lines = 131, VSync = 0
-----------------------LOOP------------------------
Detected screen size = 1440x900
Setting 4:3 soft
Analyze Csync: polarity unchanged (inverted)
Detected polarity state = 3, +H+V (Separate H & V CPLD)
        clkinfo.clock = 14318181 Hz
     clkinfo.line_len = 912
    clkinfo.clock_ppm = 4500 ppm
    Nominal 100 lines = 6369500 ns
     Actual 100 lines = 6369696 ns
          Clock error = 30 PPM
 Error adjusted clock = 14317740 Hz
 Target PLL frequency = 2061754608 Hz, prediv = 1, PER = 4
 Actual PLL frequency = 2061754608 Hz
        GPCLK Divisor = 6
Vsync retry count = 0
      Lines per frame = 262, (262.002)
Actual frame time = 16688708 ns (non-interlaced), line time = 63696 ns
Window: H = 63409 to 63981, V = 16613158 to 16763022, S = +H+V
Looking for autoswitch match = 63696, 262, 262, 3
Autoswitch match: CGA (0) = 63408, 63981, 262, 3
Setting subprofile to 0
Detected screen size = 1440x900
Setting 4:3 soft
Analyze Csync: polarity unchanged (inverted)
Detected polarity state = 3, +H+V (Separate H & V CPLD)
        clkinfo.clock = 14318181 Hz
     clkinfo.line_len = 912
    clkinfo.clock_ppm = 4500 ppm
    Nominal 100 lines = 6369500 ns
     Actual 100 lines = 6359736 ns
          Clock error = -1532 PPM
WARN: PPM error too large, using nominal clock
 Error adjusted clock = 14318181 Hz
 Target PLL frequency = 2061818064 Hz, prediv = 1, PER = 4
 Actual PLL frequency = 2061818064 Hz
        GPCLK Divisor = 6
Vsync retry count = 0
      Lines per frame = 262, (262)
Actual frame time = 16688759 ns (non-interlaced), line time = 63697 ns
Window: H = 63409 to 63981, V = 16613158 to 16763022, S = +H+V
Width or Height differ from last FB: Setting dummy 64x64 framebuffer
Overscan L=0, R=0, T=0, B=0
Initialised Framebuffer
Size: 882x468 (requested 882x468)
Pitch: 896 bytes
Framebuffer address: DE000000
RAM benchmark: Main memory = 799290 ns, Screen memory = 26438662 ns
Timing exceeds window: H = 107333, V = 75099025, Lines = 700, VSync = 0
-----------------------LOOP------------------------
Detected screen size = 1440x900
Setting 4:3 soft
Analyze Csync: polarity unchanged (inverted)
Detected polarity state = 3, +H+V (Separate H & V CPLD)
        clkinfo.clock = 14318181 Hz
     clkinfo.line_len = 912
    clkinfo.clock_ppm = 4500 ppm
    Nominal 100 lines = 6369500 ns
     Actual 100 lines = 6369741 ns
          Clock error = 37 PPM
 Error adjusted clock = 14317639 Hz
 Target PLL frequency = 2061740040 Hz, prediv = 1, PER = 4
 Actual PLL frequency = 2061740040 Hz
        GPCLK Divisor = 6
Vsync retry count = 0
      Lines per frame = 262, (261.998)
Actual frame time = 16688635 ns (non-interlaced), line time = 63697 ns
Window: H = 63409 to 63981, V = 16613158 to 16763022, S = +H+V
Looking for autoswitch match = 63697, 262, 262, 3
Autoswitch match: CGA (0) = 63408, 63981, 262, 3
Setting subprofile to 0
Detected screen size = 1440x900
Setting 4:3 soft
Analyze Csync: polarity unchanged (inverted)
Detected polarity state = 3, +H+V (Separate H & V CPLD)
        clkinfo.clock = 14318181 Hz
     clkinfo.line_len = 912
    clkinfo.clock_ppm = 4500 ppm
    Nominal 100 lines = 6369500 ns
     Actual 100 lines = 6369764 ns
          Clock error = 41 PPM
 Error adjusted clock = 14317587 Hz
 Target PLL frequency = 2061732600 Hz, prediv = 1, PER = 4
 Actual PLL frequency = 2061732600 Hz
        GPCLK Divisor = 6
Vsync retry count = 0
      Lines per frame = 262, (261.999)
Actual frame time = 16688682 ns (non-interlaced), line time = 63697 ns
Window: H = 63409 to 63981, V = 16613158 to 16763022, S = +H+V
Width or Height differ from last FB: Setting dummy 64x64 framebuffer
Overscan L=0, R=0, T=0, B=0
Initialised Framebuffer
Size: 882x468 (requested 882x468)
Pitch: 896 bytes
Framebuffer address: DE000000
RAM benchmark: Main memory = 799535 ns, Screen memory = 26441989 ns
Locked
Timing exceeds window: H = 127370, V = 16688685, Lines = 131, VSync = 0
-----------------------LOOP------------------------
Detected screen size = 1440x900
Setting 4:3 soft
Analyze Csync: polarity unchanged (inverted)
Detected polarity state = 3, +H+V (Separate H & V CPLD)
        clkinfo.clock = 14318181 Hz
     clkinfo.line_len = 912
    clkinfo.clock_ppm = 4500 ppm
    Nominal 100 lines = 6369500 ns
     Actual 100 lines = 6369716 ns
          Clock error = 33 PPM
 Error adjusted clock = 14317695 Hz
 Target PLL frequency = 2061748128 Hz, prediv = 1, PER = 4
 Actual PLL frequency = 2061748128 Hz
        GPCLK Divisor = 6
Vsync retry count = 0
      Lines per frame = 262, (262.002)
Actual frame time = 16688758 ns (non-interlaced), line time = 63697 ns
Window: H = 63409 to 63981, V = 16613158 to 16763022, S = +H+V
Looking for autoswitch match = 63697, 262, 262, 3
Autoswitch match: CGA (0) = 63408, 63981, 262, 3
Setting subprofile to 0
Detected screen size = 1440x900
Setting 4:3 soft
Analyze Csync: polarity unchanged (inverted)
Detected polarity state = 3, +H+V (Separate H & V CPLD)
        clkinfo.clock = 14318181 Hz
     clkinfo.line_len = 912
    clkinfo.clock_ppm = 4500 ppm
    Nominal 100 lines = 6369500 ns
     Actual 100 lines = 6369751 ns
          Clock error = 39 PPM
WARN: PPM error too large, using nominal clock
 Error adjusted clock = 14318181 Hz
 Target PLL frequency = 2061818064 Hz, prediv = 1, PER = 4
 Actual PLL frequency = 2061818064 Hz
        GPCLK Divisor = 6
Vsync retry count = 0
      Lines per frame = 262, (261.998)
Actual frame time = 16688705 ns (non-interlaced), line time = 63697 ns
Window: H = 63409 to 63981, V = 16613158 to 16763022, S = +H+V
Width or Height differ from last FB: Setting dummy 64x64 framebuffer
Overscan L=0, R=0, T=0, B=0
Initialised Framebuffer
Size: 882x468 (requested 882x468)
Pitch: 896 bytes
Framebuffer address: DE000000
RAM benchmark: Main memory = 799470 ns, Screen memory = 26459661 ns
Timing exceeds window: H = 63673, V = 75099079, Lines = 1179, VSync = 0
-----------------------LOOP------------------------
Detected screen size = 1440x900
Setting 4:3 soft
Analyze Csync: polarity unchanged (inverted)
Detected polarity state = 3, +H+V (Separate H & V CPLD)
        clkinfo.clock = 14318181 Hz
     clkinfo.line_len = 912
    clkinfo.clock_ppm = 4500 ppm
    Nominal 100 lines = 6369500 ns
     Actual 100 lines = 6369772 ns
          Clock error = 42 PPM
 Error adjusted clock = 14317569 Hz
 Target PLL frequency = 2061730008 Hz, prediv = 1, PER = 4
 Actual PLL frequency = 2061730008 Hz
        GPCLK Divisor = 6
Vsync retry count = 0
      Lines per frame = 262, (262)
Actual frame time = 16688691 ns (non-interlaced), line time = 63697 ns
Window: H = 63409 to 63981, V = 16613158 to 16763022, S = +H+V
Looking for autoswitch match = 63697, 262, 262, 3
Autoswitch match: CGA (0) = 63408, 63981, 262, 3
Setting subprofile to 0
Detected screen size = 1440x900
Setting 4:3 soft
Analyze Csync: polarity unchanged (inverted)
Detected polarity state = 3, +H+V (Separate H & V CPLD)
        clkinfo.clock = 14318181 Hz
     clkinfo.line_len = 912
    clkinfo.clock_ppm = 4500 ppm
    Nominal 100 lines = 6369500 ns
     Actual 100 lines = 6369721 ns
          Clock error = 34 PPM
 Error adjusted clock = 14317684 Hz
 Target PLL frequency = 2061746520 Hz, prediv = 1, PER = 4
 Actual PLL frequency = 2061746520 Hz
        GPCLK Divisor = 6
Vsync retry count = 0
      Lines per frame = 262, (261.999)
Actual frame time = 16688695 ns (non-interlaced), line time = 63697 ns
Window: H = 63409 to 63981, V = 16613158 to 16763022, S = +H+V
Width or Height differ from last FB: Setting dummy 64x64 framebuffer
Overscan L=0, R=0, T=0, B=0
Initialised Framebuffer
Size: 882x468 (requested 882x468)
Pitch: 896 bytes
Framebuffer address: DE000000
RAM benchmark: Main memory = 799651 ns, Screen memory = 26459391 ns
Timing exceeds window: H = 127425, V = 16688644, Lines = 131, VSync = 0
-----------------------LOOP------------------------
Detected screen size = 1440x900
Setting 4:3 soft
Analyze Csync: polarity unchanged (inverted)
Detected polarity state = 3, +H+V (Separate H & V CPLD)
        clkinfo.clock = 14318181 Hz
     clkinfo.line_len = 912
    clkinfo.clock_ppm = 4500 ppm
    Nominal 100 lines = 6369500 ns
     Actual 100 lines = 6369739 ns
          Clock error = 37 PPM
 Error adjusted clock = 14317643 Hz
 Target PLL frequency = 2061740688 Hz, prediv = 1, PER = 4
 Actual PLL frequency = 2061740688 Hz
        GPCLK Divisor = 6
Vsync retry count = 0
      Lines per frame = 262, (261.999)
Actual frame time = 16688691 ns (non-interlaced), line time = 63697 ns
Window: H = 63409 to 63981, V = 16613158 to 16763022, S = +H+V
Looking for autoswitch match = 63697, 262, 262, 3
Autoswitch match: CGA (0) = 63408, 63981, 262, 3
Setting subprofile to 0
Detected screen size = 1440x900
Setting 4:3 soft
Analyze Csync: polarity unchanged (inverted)
Detected polarity state = 3, +H+V (Separate H & V CPLD)
        clkinfo.clock = 14318181 Hz
     clkinfo.line_len = 912
    clkinfo.clock_ppm = 4500 ppm
    Nominal 100 lines = 6369500 ns
     Actual 100 lines = 6369700 ns
          Clock error = 31 PPM
WARN: PPM error too large, using nominal clock
 Error adjusted clock = 14318181 Hz
 Target PLL frequency = 2061818064 Hz, prediv = 1, PER = 4
 Actual PLL frequency = 2061818064 Hz
        GPCLK Divisor = 6
Vsync retry count = 9
      Lines per frame = 262, (262)
Actual frame time = 16688745 ns (non-interlaced), line time = 63697 ns
Window: H = 63409 to 63981, V = 16613158 to 16763022, S = +H+V
Width or Height differ from last FB: Setting dummy 64x64 framebuffer
Overscan L=0, R=0, T=0, B=0
Initialised Framebuffer
Size: 882x468 (requested 882x468)
Pitch: 896 bytes
Framebuffer address: DE000000
RAM benchmark: Main memory = 799523 ns, Screen memory = 26452544 ns
Timing exceeds window: H = 63832, V = 75099169, Lines = 1177, VSync = 0
-----------------------LOOP------------------------
Detected screen size = 1440x900
Setting 4:3 soft
Analyze Csync: polarity unchanged (inverted)
Detected polarity state = 3, +H+V (Separate H & V CPLD)
        clkinfo.clock = 14318181 Hz
     clkinfo.line_len = 912
    clkinfo.clock_ppm = 4500 ppm
    Nominal 100 lines = 6369500 ns
     Actual 100 lines = 6369726 ns
          Clock error = 35 PPM
 Error adjusted clock = 14317672 Hz
 Target PLL frequency = 2061744888 Hz, prediv = 1, PER = 4
 Actual PLL frequency = 2061744888 Hz
        GPCLK Divisor = 6
Vsync retry count = 0
      Lines per frame = 262, (262.001)
Actual frame time = 16688775 ns (non-interlaced), line time = 63697 ns
Window: H = 63409 to 63981, V = 16613158 to 16763022, S = +H+V
Looking for autoswitch match = 63697, 262, 262, 3
Autoswitch match: CGA (0) = 63408, 63981, 262, 3
Setting subprofile to 0
Detected screen size = 1440x900
Setting 4:3 soft
Analyze Csync: polarity unchanged (inverted)
Detected polarity state = 3, +H+V (Separate H & V CPLD)
        clkinfo.clock = 14318181 Hz
     clkinfo.line_len = 912
    clkinfo.clock_ppm = 4500 ppm
    Nominal 100 lines = 6369500 ns
     Actual 100 lines = 6369762 ns
          Clock error = 41 PPM
 Error adjusted clock = 14317592 Hz
 Target PLL frequency = 2061733248 Hz, prediv = 1, PER = 4
 Actual PLL frequency = 2061733248 Hz
        GPCLK Divisor = 6
Vsync retry count = 0
      Lines per frame = 262, (262.001)
Actual frame time = 16688771 ns (non-interlaced), line time = 63697 ns
Window: H = 63409 to 63981, V = 16613158 to 16763022, S = +H+V
Width or Height differ from last FB: Setting dummy 64x64 framebuffer
Overscan L=0, R=0, T=0, B=0
Initialised Framebuffer
Size: 882x468 (requested 882x468)
Pitch: 896 bytes
Framebuffer address: DE000000
RAM benchmark: Main memory = 799648 ns, Screen memory = 26457486 ns
Timing exceeds window: H = 127365, V = 16688625, Lines = 131, VSync = 0
-----------------------LOOP------------------------
Detected screen size = 1440x900
Setting 4:3 soft
Analyze Csync: polarity unchanged (inverted)
Detected polarity state = 3, +H+V (Separate H & V CPLD)
        clkinfo.clock = 14318181 Hz
     clkinfo.line_len = 912
    clkinfo.clock_ppm = 4500 ppm
    Nominal 100 lines = 6369500 ns
     Actual 100 lines = 6369736 ns
          Clock error = 37 PPM
 Error adjusted clock = 14317650 Hz
 Target PLL frequency = 2061741672 Hz, prediv = 1, PER = 4
 Actual PLL frequency = 2061741672 Hz
        GPCLK Divisor = 6
Vsync retry count = 0
      Lines per frame = 262, (261.999)
Actual frame time = 16688611 ns (non-interlaced), line time = 63697 ns
Window: H = 63409 to 63981, V = 16613158 to 16763022, S = +H+V
Looking for autoswitch match = 63697, 262, 262, 3
Autoswitch match: CGA (0) = 63408, 63981, 262, 3
Setting subprofile to 0
Detected screen size = 1440x900
Setting 4:3 soft
Analyze Csync: polarity unchanged (inverted)
Detected polarity state = 3, +H+V (Separate H & V CPLD)
        clkinfo.clock = 14318181 Hz
     clkinfo.line_len = 912
    clkinfo.clock_ppm = 4500 ppm
    Nominal 100 lines = 6369500 ns
     Actual 100 lines = 6369709 ns
          Clock error = 32 PPM
 Error adjusted clock = 14317711 Hz
 Target PLL frequency = 2061750408 Hz, prediv = 1, PER = 4
 Actual PLL frequency = 2061750408 Hz
        GPCLK Divisor = 6
Vsync retry count = 0
      Lines per frame = 262, (261.999)
Actual frame time = 16688620 ns (non-interlaced), line time = 63697 ns
Window: H = 63409 to 63981, V = 16613158 to 16763022, S = +H+V
Width or Height differ from last FB: Setting dummy 64x64 framebuffer
Overscan L=0, R=0, T=0, B=0
Initialised Framebuffer
Size: 882x468 (requested 882x468)
Pitch: 896 bytes
Framebuffer address: DE000000
RAM benchmark: Main memory = 799615 ns, Screen memory = 26457894 ns
Locked
*PLL
Timing exceeds window: H = 158438, V = 16688641, Lines = 105, VSync = 0
-----------------------LOOP------------------------
Detected screen size = 1440x900
Setting 4:3 soft
Analyze Csync: polarity unchanged (inverted)
Detected polarity state = 3, +H+V (Separate H & V CPLD)
        clkinfo.clock = 14318181 Hz
     clkinfo.line_len = 912
    clkinfo.clock_ppm = 4500 ppm
    Nominal 100 lines = 6369500 ns
     Actual 100 lines = 10317557 ns
          Clock error = 619837 PPM
WARN: PPM error too large, using nominal clock
 Error adjusted clock = 14318181 Hz
 Target PLL frequency = 2061818064 Hz, prediv = 1, PER = 4
 Actual PLL frequency = 2061818064 Hz
        GPCLK Divisor = 6
Vsync retry count = 9
      Lines per frame = 515, (515.251)
Actual frame time = 53161228 ns (interlaced), line time = 103175 ns
Window: H = 63409 to 63981, V = 16613158 to 16763022, S = +H+V
Looking for autoswitch match = 103175, 257, 258, 3
Autoswitch: No profile matched
Width or Height differ from last FB: Setting dummy 64x64 framebuffer
Overscan L=0, R=0, T=0, B=0
Initialised Framebuffer
Size: 882x468 (requested 882x468)
Pitch: 896 bytes
Framebuffer address: DE000000
RAM benchmark: Main memory = 798047 ns, Screen memory = 26461651 ns
Timing exceeds window: H = 127373, V = 46029011, Lines = 361, VSync = 0
-----------------------LOOP------------------------
Detected screen size = 1440x900
Setting 4:3 soft
Analyze Csync: polarity unchanged (inverted)
Detected polarity state = 3, +H+V (Separate H & V CPLD)
        clkinfo.clock = 14318181 Hz
     clkinfo.line_len = 912
    clkinfo.clock_ppm = 4500 ppm
    Nominal 100 lines = 6369500 ns
     Actual 100 lines = 6369709 ns
          Clock error = 32 PPM
WARN: PPM error too large, using nominal clock
 Error adjusted clock = 14318181 Hz
 Target PLL frequency = 2061818064 Hz, prediv = 1, PER = 4
 Actual PLL frequency = 2061818064 Hz
        GPCLK Divisor = 6
Vsync retry count = 0
      Lines per frame = 275, (274.824)
Actual frame time = 17505486 ns (non-interlaced), line time = 63696 ns
Window: H = 63409 to 63981, V = 16613158 to 16763022, S = +H+V
Looking for autoswitch match = 63696, 275, 275, 3
Autoswitch: No profile matched
Width or Height differ from last FB: Setting dummy 64x64 framebuffer
Overscan L=0, R=0, T=0, B=0
Initialised Framebuffer
Size: 882x468 (requested 882x468)
Pitch: 896 bytes
Framebuffer address: DE000000
RAM benchmark: Main memory = 798021 ns, Screen memory = 26467304 ns
Timing exceeds window: H = 107435, V = 71446763, Lines = 665, VSync = 0
-----------------------LOOP------------------------
Detected screen size = 1440x900
Setting 4:3 soft
Analyze Csync: polarity unchanged (inverted)
Detected polarity state = 3, +H+V (Separate H & V CPLD)
        clkinfo.clock = 14318181 Hz
     clkinfo.line_len = 912
    clkinfo.clock_ppm = 4500 ppm
    Nominal 100 lines = 6369500 ns
     Actual 100 lines = 6369646 ns
          Clock error = 22 PPM
WARN: PPM error too large, using nominal clock
 Error adjusted clock = 14318181 Hz
 Target PLL frequency = 2061818064 Hz, prediv = 1, PER = 4
 Actual PLL frequency = 2061818064 Hz
        GPCLK Divisor = 6
Vsync retry count = 0
      Lines per frame = 275, (274.826)
Actual frame time = 17505560 ns (non-interlaced), line time = 63696 ns
Window: H = 63409 to 63981, V = 16613158 to 16763022, S = +H+V
Looking for autoswitch match = 63696, 275, 275, 3
Autoswitch: No profile matched
Width or Height differ from last FB: Setting dummy 64x64 framebuffer
Overscan L=0, R=0, T=0, B=0
Initialised Framebuffer
Size: 882x468 (requested 882x468)
Pitch: 896 bytes
Framebuffer address: DE000000
RAM benchmark: Main memory = 798103 ns, Screen memory = 26467516 ns
Timing exceeds window: H = 107340, V = 71446893, Lines = 666, VSync = 0
-----------------------LOOP------------------------
Detected screen size = 1440x900
Setting 4:3 soft
Analyze Csync: polarity unchanged (inverted)
Detected polarity state = 3, +H+V (Separate H & V CPLD)
        clkinfo.clock = 14318181 Hz
     clkinfo.line_len = 912
    clkinfo.clock_ppm = 4500 ppm
    Nominal 100 lines = 6369500 ns
     Actual 100 lines = 6369669 ns
          Clock error = 26 PPM
WARN: PPM error too large, using nominal clock
 Error adjusted clock = 14318181 Hz
 Target PLL frequency = 2061818064 Hz, prediv = 1, PER = 4
 Actual PLL frequency = 2061818064 Hz
        GPCLK Divisor = 6
Vsync retry count = 0
      Lines per frame = 275, (274.827)
Actual frame time = 17505704 ns (non-interlaced), line time = 63697 ns
Window: H = 63409 to 63981, V = 16613158 to 16763022, S = +H+V
Looking for autoswitch match = 63697, 275, 275, 3
Autoswitch: No profile matched
Width or Height differ from last FB: Setting dummy 64x64 framebuffer
Overscan L=0, R=0, T=0, B=0
Initialised Framebuffer
Size: 882x468 (requested 882x468)
Pitch: 896 bytes
Framebuffer address: DE000000
RAM benchmark: Main memory = 797988 ns, Screen memory = 26467139 ns
Timing exceeds window: H = 107277, V = 71446794, Lines = 666, VSync = 0
-----------------------LOOP------------------------
Detected screen size = 1440x900
Setting 4:3 soft
Analyze Csync: polarity unchanged (inverted)
Detected polarity state = 3, +H+V (Separate H & V CPLD)
        clkinfo.clock = 14318181 Hz
     clkinfo.line_len = 912
    clkinfo.clock_ppm = 4500 ppm
    Nominal 100 lines = 6369500 ns
     Actual 100 lines = 6369714 ns
          Clock error = 33 PPM
WARN: PPM error too large, using nominal clock
 Error adjusted clock = 14318181 Hz
 Target PLL frequency = 2061818064 Hz, prediv = 1, PER = 4
 Actual PLL frequency = 2061818064 Hz
        GPCLK Divisor = 6
Vsync retry count = 0
      Lines per frame = 487, (487)
Actual frame time = 31020375 ns (interlaced), line time = 63696 ns
Window: H = 63409 to 63981, V = 16613158 to 16763022, S = +H+V
Looking for autoswitch match = 63696, 243, 244, 3
Autoswitch: No profile matched
Width or Height differ from last FB: Setting dummy 64x64 framebuffer
Overscan L=0, R=0, T=0, B=0
Initialised Framebuffer
Size: 882x468 (requested 882x468)
Pitch: 896 bytes
Framebuffer address: DE000000
RAM benchmark: Main memory = 797688 ns, Screen memory = 26459906 ns
Timing exceeds window: H = 107277, V = 72703560, Lines = 678, VSync = 0
-----------------------LOOP------------------------
Detected screen size = 1440x900
Setting 4:3 soft
Analyze Csync: polarity unchanged (inverted)
Detected polarity state = 3, +H+V (Separate H & V CPLD)
        clkinfo.clock = 14318181 Hz
     clkinfo.line_len = 912
    clkinfo.clock_ppm = 4500 ppm
    Nominal 100 lines = 6369500 ns
     Actual 100 lines = 6369671 ns
          Clock error = 26 PPM
 Error adjusted clock = 14317796 Hz
 Target PLL frequency = 2061762696 Hz, prediv = 1, PER = 4
 Actual PLL frequency = 2061762696 Hz
        GPCLK Divisor = 6
Vsync retry count = 0
      Lines per frame = 262, (262.001)
Actual frame time = 16688555 ns (non-interlaced), line time = 63696 ns
Window: H = 63409 to 63981, V = 16613158 to 16763022, S = +H+V
Looking for autoswitch match = 63696, 262, 262, 3
Autoswitch match: CGA (0) = 63408, 63981, 262, 3
Setting subprofile to 0
Detected screen size = 1440x900
Setting 4:3 soft
Analyze Csync: polarity unchanged (inverted)
Detected polarity state = 3, +H+V (Separate H & V CPLD)
        clkinfo.clock = 14318181 Hz
     clkinfo.line_len = 912
    clkinfo.clock_ppm = 4500 ppm
    Nominal 100 lines = 6369500 ns
     Actual 100 lines = 6369686 ns
          Clock error = 29 PPM
 Error adjusted clock = 14317762 Hz
 Target PLL frequency = 2061757848 Hz, prediv = 1, PER = 4
 Actual PLL frequency = 2061757848 Hz
        GPCLK Divisor = 6
Vsync retry count = 0
      Lines per frame = 262, (262)
Actual frame time = 16688522 ns (non-interlaced), line time = 63696 ns
Window: H = 63409 to 63981, V = 16613158 to 16763022, S = +H+V
Width or Height differ from last FB: Setting dummy 64x64 framebuffer
Overscan L=0, R=0, T=0, B=0
Initialised Framebuffer
Size: 882x468 (requested 882x468)
Pitch: 896 bytes
Framebuffer address: DE000000
RAM benchmark: Main memory = 799099 ns, Screen memory = 26454663 ns
Locked
*PLL
*PLL
*PLL
*PLL
*PLL
Sync01
Locked
*PLL
Screen capture starting, file = /Captures/Standard_PC/capture1.png
Scaling is 1 x 3 x=882 y=468 sx=882 sy=234 px=882 py=702
Screen capture PNG length = 3297, writing data...
Screen capture complete
        clkinfo.clock = 14318181 Hz
     clkinfo.line_len = 912
    clkinfo.clock_ppm = 4500 ppm
    Nominal 100 lines = 6369500 ns
     Actual 100 lines = 6369726 ns
          Clock error = 35 PPM
 Error adjusted clock = 14317672 Hz
 Target PLL frequency = 2061744888 Hz, prediv = 1, PER = 4
 Actual PLL frequency = 2061744888 Hz
        GPCLK Divisor = 6
Vsync retry count = 0
      Lines per frame = 262, (262.002)
Actual frame time = 16688704 ns (non-interlaced), line time = 63696 ns
Calibrating mode: default
*PLL
phases = 1 1 1 1 1 1; half = 0; pixel h offset = 0; rate = 1; invert = 1
Not a BBC display: Delay not auto adjusted
Performing final test
phases = 1 1 1 1 1 1; half = 0; pixel h offset = 7; rate = 1; invert = 1
Calibration complete, errors = 0
UnLock
Locked
        clkinfo.clock = 14318181 Hz
     clkinfo.line_len = 912
    clkinfo.clock_ppm = 4500 ppm
    Nominal 100 lines = 6369500 ns
     Actual 100 lines = 6369719 ns
          Clock error = 34 PPM
 Error adjusted clock = 14317688 Hz
 Target PLL frequency = 2061747168 Hz, prediv = 1, PER = 4
 Actual PLL frequency = 2061747168 Hz
        GPCLK Divisor = 6
Vsync retry count = 0
      Lines per frame = 262, (262.001)
Actual frame time = 16688663 ns (non-interlaced), line time = 63696 ns
Calibrating mode: default
phases = 2 2 2 2 2 2; half = 0; pixel h offset = 0; rate = 1; invert = 1
Not a BBC display: Delay not auto adjusted
Performing final test
phases = 2 2 2 2 2 2; half = 0; pixel h offset = 7; rate = 1; invert = 1
Calibration complete, errors = 0
*PLL