STV XBMC GDB

/usr/lib/xbmc # gdb xbmc.bin
GNU gdb (GDB) 7.1
Copyright (C) 2010 Free Software Foundation, Inc.
License GPLv3+: GNU GPL version 3 or later <http://gnu.org/licenses/gpl.html>
This is free software: you are free to change and redistribute it.
There is NO WARRANTY, to the extent permitted by law.  Type "show copying"
and "show warranty" for details.
This GDB was configured as "arm-unknown-linux-gnueabi".
For bug reporting instructions, please see:
<http://www.gnu.org/software/gdb/bugs/>...
Reading symbols from /usr/lib/xbmc/xbmc.bin...(no debugging symbols found)...done.
(gdb) run --standalone
Starting program: /usr/lib/xbmc/xbmc.bin --standalone
[Thread debugging using libthread_db enabled]
[ 1050.426274] aml_m3_codec_mute mute=1
[ 1050.430903] aml_m3_codec_mute mute=1
[ 1050.433951] aml_m3_codec_mute mute=1
[ 1050.437154] aml_m3_codec_mute mute=1
[ 1050.441578] aml_m3_codec_mute mute=1
[ 1052.044785] buf=0
[ 1052.044812] IEC958_mode_raw=0
[ 1052.057837] ***Entered sound/soc/aml/aml_dai.c:aml_dai_hw_params
[ 1052.059532] I2S hw init,i2s mode 0
[ 1052.061684] iec958 mode PCM16
[ 1052.064626] IEC958 16bit
[ 1052.067135] iec958 nodify hdmi audio type 1
[ 1052.071388] audio info changed.notify to hdmi: type 1,sr 44100
[ 1052.077883] HDMI: aout notify rate 44100
[ 1052.081059] HDMI: aout notify format PCM
[ 1052.085402] aml_m3_codec_mute mute=0
[ 1052.096429] I2S hw init,i2s mode 0
[ 1052.096460] iec958 mode PCM16
[ 1052.097240] IEC958 16bit
[ 1052.099830] iec958 nodify hdmi audio type 1
[ 1052.107856] aml_m3_codec_mute mute=0
[New Thread 0x41d31460 (LWP 306)]
[ 1052.121389] ***Entered sound/soc/aml/aml_pcm.c:aml_audio_clock_gating_enable
Restarting network time protocol daemon: ntpd
Stopping network time protocol daemon: ntpd.
Getting initial time via ntp.
Starting network time protocol daemon: ntpd.
[New Thread 0x42531460 (LWP 316)]
[New Thread 0x42d31460 (LWP 317)]
[New Thread 0x43531460 (LWP 318)]
[New Thread 0x43d31460 (LWP 319)]
[ 1057.078278] Headphone unpluged
[New Thread 0x4457f460 (LWP 320)]
[ 1060.850097] Mali<2>: MMU session begin
[ 1060.850163] Mali<2>: Page directory for session 0xe6744820 placed at physical address 0xA6384000
[ 1060.857075] Mali<2>: MMU session begin: success
[ 1060.862445] Mali<2>: Core: session_begin: for Mali-400 PP
[ 1060.866931] Mali<2>: Core: session_begin: for Mali-400 GP
[New Thread 0x44e2e460 (LWP 321)]
[ 1060.890541] tvmode set to 720p50hz

[ 1060.890580] [0x1b7e] = 0xff
[ 1060.891260] [0x1b80] = 0x0
[ 1060.893940] [0x1b57] = 0x0
[ 1060.896625] [0x1059] = 0x1
[ 1060.899392] [0x1bb8] = 0x52
[ 1060.902084] [0x1b62] = 0x202d
[ 1060.905036] [0x1b97] = 0xf77
[ 1060.907884] [0x1bae] = 0x2ed
[ 1060.910760] [0x1b98] = 0x50
[ 1060.913515] [0x1b99] = 0xf0
[ 1060.916286] [0x1b9a] = 0x50
[ 1060.919069] [0x1ba4] = 0x288
[ 1060.921916] [0x1ba3] = 0xc87
[ 1060.924774] [0x1ba7] = 0x80
[ 1060.927545] [0x1ba8] = 0xd0
[ 1060.930335] [0x1b9b] = 0x2b0
[ 1060.933176] [0x1b9c] = 0xcb0
[ 1060.936033] [0x1b9d] = 0x4
[ 1060.938739] [0x1b9e] = 0x8
[ 1060.941404] [0x1ba1] = 0x4
[ 1060.944088] [0x1ba2] = 0x8
[ 1060.946773] [0x1ba6] = 0x1d
[ 1060.949561] [0x1baf] = 0x2ec
[ 1060.952404] [0x1ba9] = 0x80
[ 1060.955175] [0x1baa] = 0x80
[ 1060.957947] [0x1bab] = 0x0
[ 1060.960643] [0x1bac] = 0x5
[ 1060.963317] [0x1b94] = 0x288
[ 1060.966175] [0x1b95] = 0xc87
[ 1060.969048] [0x1b68] = 0x100
[ 1060.971892] [0x1b8d] = 0x4040
[ 1060.974836] [0x1b8e] = 0x19
[ 1060.977608] [0x1b81] = 0x407
[ 1060.980479] [0x1b96] = 0x0
[ 1060.983152] [0x1b60] = 0x0
[ 1060.985836] [0x1b6e] = 0x200
[ 1060.988709] [0x1b58] = 0x0
[ 1060.991380] [0x1b7e] = 0x0
[ 1060.994065] [0x1b78] = 0x1
[ 1060.996749] [0x1b79] = 0x1
[ 1060.999471] [0x1b7a] = 0x1
[ 1061.002131] [0x1b7b] = 0x1
[ 1061.004805] [0x1b7c] = 0x1
[ 1061.007490] [0x1b7d] = 0x1
[ 1061.010192] [0x1b57] = 0x0
[ 1061.012861] [0x1b80] = 0x1
[ 1061.015546] mode is: 9
[ 1061.017886] VPU_VIU_VENC_MUX_CTRL: 0x5
[ 1061.021624] viu chan = 1
[ 1061.024120] VPU_VIU_VENC_MUX_CTRL: 0x6
[ 1061.027853] new mode 720p50hz set ok

[ 1061.036072] set mode VIC 19 (cd0,cs0,pm1,vd0,1)
[ 1061.036095] param->VIC:19
[ 1061.038748] mode is: 6
[ 1061.041012] VPU_VIU_VENC_MUX_CTRL: 0x6
[ 1061.044733] viu chan = 1
[ 1061.047245] VPU_VIU_VENC_MUX_CTRL: 0x6
[ 1061.051015] hdmin get brd phy data
[ 1061.054348] hdmi phy setting
[ 1061.058499] hdmin get brd phy data
[ 1061.060583] hdmi phy setting
[ 1061.063554] Sink is DVI device
[ 1061.067535] No sink attached
[ 1061.070983] osd0 free scale DISABLE

[ 1061.073002] osd1 free scale DISABLE

[ 1061.101310] vfm_map_store:rm all
[ 1061.101393] vfm_map_store:add default_osd osd amvideo
[ 1061.104068] vfm_map_store:add default decoder ppmgr amvideo
[ 1061.110513] video disable try be changed to 0 by xbmc.bin
[ 1061.114994] video disable try be changed to 1 by xbmc.bin
[ 1061.120871] osd0=>x:0 ,y:0,w:1280,h:720

[ 1061.120876]  osd1=> x:0,y:0,w:0,h:0

[ 1061.138298] current VIC: 19
[ 1061.138305] audio sample rate: 2
[ 1061.138340] PCM out to HDMI
[ 1061.150371] Time out: AIU_HDMI_CLK_DATA_CTRL
[ 1061.162374] Time out: AIU_HDMI_CLK_DATA_CTRL
[ 1061.162380] Enable audio spdif to HDMI
[ 1061.162428] HDMI Audio Type: PCM
[ 1061.162660] HDMI: set audio param
[ 1061.501507] tvmode set to 720p50hz

[ 1061.501537] don't set the same mode as current.

[ 1061.504192] osd0 free scale DISABLE

[ 1061.507696] osd1 free scale DISABLE

[ 1061.540425] vfm_map_store:rm all
[ 1061.540505] vfm_map_store:add default_osd osd amvideo
[ 1061.543177] vfm_map_store:add default decoder ppmgr amvideo
[ 1061.549635] video disable try be changed to 0 by xbmc.bin
[ 1061.554100] video disable try be changed to 1 by xbmc.bin
[ 1061.559971] osd0=>x:0 ,y:0,w:1280,h:720

[ 1061.559976]  osd1=> x:0,y:0,w:0,h:0

[New Thread 0x45844460 (LWP 322)]
[Thread 0x45844460 (LWP 322) exited]
[New Thread 0x4641a460 (LWP 323)]
xbmc.bin: /home/stephen/SteveDev/buildroot-AmLogic/output/build/xbmc-0987bea35050a3f5d352c3205d75b7173a7d126d/xbmc/utils/MathUtils.h:166: int MathUtils::truncate_int(double): Assertion `x > static_cast<double>((-2147483647 - 1) / 2) - 1.0' failed.

Program received signal SIGABRT, Aborted.
0x411782ec in raise () from /lib/libc.so.6
^C(gdb) Quit
(gdb) quit
A debugging session is active.

	Inferior 1 [process 293] will be killed.

Quit anyway? (y or n) y
[ 1123.284776] aml_m3_codec_mute mute=1
[ 1123.288153] Mali<2>: Session ending
[ 1123.288180] Mali<2>: Core: session_close: for Mali-400 GP
[ 1123.291639] Mali<2>: Core: session_close: for Mali-400 PP
[ 1123.297007] Mali<2>: MMU session end
[ 1123.301058] Mali<1>: Cleanup of descriptor 1 mapping to 0xe6155800 in descriptor table
[ 1123.308508] Mali<1>: Cleanup of descriptor 2 mapping to 0xe6155600 in descriptor table
[ 1123.316565] Mali<2>: Session has ended
/usr/lib/xbmc #