API tools faq
paste
Guest User

boox-note2-recovery2

a guest
Oct 6th, 2025
114
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 85.67 KB | None | 0 0
raw download clone embed print report
  1. Format: Log Type - Time(microsec) - Message - Optional Info
  2. Log Type: B - Since Boot(Power On Reset), D - Delta, S - Statistic
  3. S - QC_IMAGE_VERSION_STRING=BOOT.BF.3.3-00228
  4. S - IMAGE_VARIANT_STRING=JAASANAZA
  5. S - OEM_IMAGE_VERSION_STRING=ubuntu
  6. S - Boot Config, 0x000000e1
  7. B - 269 - PBL, Start
  8. B - 3107 - bootable_media_detect_entry, Start
  9. B - 111781 - bootable_media_detect_success, Start
  10. B - 111787 - elf_loader_entry, Start
  11. B - 113764 - auth_hash_seg_entry, Start
  12. B - 114043 - auth_hash_seg_exit, Start
  13. B - 143403 - elf_segs_hash_verify_entry, Start
  14. B - 270830 - PBL, End
  15. B - 281820 - SBL1, Start
  16. B - 336445 - pm_device_init, Start
  17. B - 339526 - BOOT_DUMP: PMi8950_PON_FSM =0x20895 :DATA=0x9
  18. B - 342210 - PON REASON:PM0:0x80000200a0 PM1:0x20020
  19. B - 367494 - PM_SET_VAL:Skip
  20. D - 32452 - pm_device_init, Delta
  21. B - 368958 - usb: hs_phy_nondrive_start
  22. B - 371673 - usb: hs_phy_nondrive_finish
  23. B - 375119 - boot_flash_init, Start
  24. D - 0 - boot_flash_init, Delta
  25. B - 382104 - boot_config_data_table_init, Start
  26. D - 5825 - boot_config_data_table_init, Delta - (0 Bytes)
  27. B - 392474 - CDT version:3,Platform ID:11,Major ID:2,Minor ID:0,Subtype:0
  28. B - 399123 - sbl1_ddr_set_params, Start
  29. B - 403759 - cpr_init, Start
  30. D - 1067 - cpr_init, Delta
  31. B - 408364 - Pre_DDR_clock_init, Start
  32. D - 244 - Pre_DDR_clock_init, Delta
  33. D - 0 - sbl1_ddr_set_params, Delta
  34. B - 421113 - do ddr sanity test, Start
  35. D - 335 - do ddr sanity test, Delta
  36. B - 427183 - pm_driver_init, Start
  37. B - 433954 - Manually set to USB500 mode
  38. B - 434442 - raw vbat: 4173, gain: -19
  39. B - 438224 - vbat: 3974
  40. B - 440603 - Battery good, bootup
  41. B - 444019 - charger_present, enalbe red led
  42. D - 17659 - pm_driver_init, Delta
  43. B - 455151 - DDR Training restore, Start
  44. B - 457195 - DDR Training restore, End
  45. B - 467290 - clock_init, Start
  46. D - 183 - clock_init, Delta
  47. B - 467595 - Image Load, Start
  48. D - 84851 - QSEE Image Loaded, Delta - (1523236 Bytes)
  49. B - 552477 - Image Load, Start
  50. D - 610 - SEC Image Loaded, Delta - (2048 Bytes)
  51. B - 559766 - sbl1_efs_handle_cookies, Start
  52. D - 823 - sbl1_efs_handle_cookies, Delta
  53. B - 567605 - Image Load, Start
  54. D - 11682 - DEVCFG Image Loaded, Delta - (34460 Bytes)
  55. B - 579683 - Image Load, Start
  56. D - 19764 - RPM Image Loaded, Delta - (168980 Bytes)
  57. B - 599477 - Image Load, Start
  58. D - 61915 - APPSBL Image Loaded, Delta - (708856 Bytes)
  59. B - 661423 - QSEE Execution, Start
  60. D - 61 - QSEE Execution, Delta
  61. B - 667096 - USB D+ check, Start
  62. B - 672250 - usb:: sdp
  63. D - 2196 - USB D+ check, Delta
  64. B - 675910 - SBL1, End
  65. D - 396347 - SBL1, Delta
  66. S - Flash Throughput, 28000 KB/s (2440676 Bytes, 85332 us)
  67. S - DDR Frequency, 931 MHz
  68. S - Core 0 Frequency, 800 MHz
  69. Android Bootloader - UART_DM Initialized!!!
  70. [50] Qseecom Init Done in Appsbl version is 0x1001000
  71. [50] secure app region addr=0x84a00000 size=0x1900000[50] TZ App region notif returned with status:0 addr:84a00000 size:26214400
  72. [60] TZ App log region register returned with status:0 addr:8f77d000 size:4096
  73. [70] Qseecom TZ Init Done in Appsbl
  74. [80] Loading cmnlib done
  75. [100] Loading cmnlib64 done
  76. [120] <8>keymaster64: KEYMASTER Init
  77. [120] Not able to search the panel:
  78. [790] calculate_bitclock(): h_back_porch[1] v_back_porch[1] dsi_bpp[24]!
  79. [790] calculate_bitclock: mipi.bitclock=0 bit_clk(every lane)=484649856 pix_clk(all lanes)=40387488 lanes[2] bpp[24] frame_rate[87]
  80. [810] Onyx Splash image header OK!
  81. [810] MEMBASE[0x8f600000] MEMSIZE[0x2a00000]!
  82. [810] fb_base[0x92001000] blocks_image[0xae] size_image[0x15b1c] blocks_waveform[0x228] size_waveform[0x44e77] size_image_nopower[0x2b522] size_image_charging[0x2b522]!
  83. [830] malloc onyx_logo_nopwer buf at 0x8f7872d0 size 1972240!
  84. [830] ERROR: Splash image header invalid
  85. [890] mdss_source_pipe_config: src size=0x58f0145 fb_off=0x0 src_xy=0x0 dst_xy=0x0
  86. [890] EINK_PANEL=ES103TC1
  87. [900] DSI xres =325 yres=1423 dst_format=3 dst_Bpp=3
  88. [920] mdp_dma_on(): MDP_INTR_STATUS[0x100].
  89. [920] mdp_dma_on(): MDP_INTR_CLEAR.
  90. [920] Device is unlocked! Skipping verification...
  91. [990] <8>keymaster64: "cmd_id=SET_ROT begin"
  92. [990] <8>keymaster64: Error: qsee_cfg_getpropval in get_enable_set_bandwidth failed for enable_set_bandwidth, ret_size = 0
  93. [1000] <8>keymaster64: "rot.data_length: 32"
  94. [1000] <8>keymaster64: "cmd_id=SET_ROT done with ret: 0 time taken: 0"
  95. [1010] <8>keymaster64: "cmd_id=GET_VERSION begin"
  96. [1020] Authentication Key not yet programmed
  97. [1020] <8>keymaster64: qsee_stor_device_init error ret: -14
  98. [1030] <8>keymaster64: "secboot device : 0"
  99. [1030] <8>keymaster64: "cmd_id=GET_VERSION done with ret: 0 time taken: 14"
  100. [1040] <8>keymaster64: "cmd_id=SET_BOOT_STATE begin"
  101. [1040] <8>keymaster64: "is_unlocked: 1"
  102. [1050] <8>keymaster64: "color: 1"
  103. [1050] <8>keymaster64: "system_version: 90000"
  104. [1050] <8>keymaster64: "system_security_level 201909"
  105. [1060] <8>keymaster64: "cmd_id=SET_BOOT_STATE done with ret: 0 time taken: 0"
  106. [1070] Sending Root of Trust to trustzone: end
  107. [1600] onyx_battery_status_check: battery(4050) is good!
  108. [1610] charger is present, enable red led
  109. [1610] onyx_battery_status_check ok!! continue boot!
  110. [1620] boot_linux_from_mmc start onyx logo display!!!
  111. [1620] onyx_epd_display start onyx logo display!!!
  112. tc358762_parse_dt(): decode vddio_33v_en_gpio err! maybe use ldo.
  113. [1810] tc358762_parse_dt(): output_control_enable[0].
  114. [2000] tc358762_i2c_probe(): TC358762 found. version id[0x6200]. timing_index[1]
  115. [2250] max17135_i2c_probe(): MAX17135 found.
  116. onyx_get_eink_screen_timing(): decode gdlr_gpio err! can igore!
  117. onyx_epdc_init_wavefw(): Waveform file Load at addr 0x92a16c00!
  118. onyx_epdc_init(): buf_pix_fmt = 5bit!cost 30 ms!
  119. max17135_power_on(): enter!
  120. max17135_power_off(): enter!
  121. onyx_epdc_draw_mode0(): cost 1510 ms!
  122. [3950] epdc_load_logo_file(): load file uboot_logo.bmp.
  123. [3960] lcd_display_bitmap(): Display bmp: 139 x 627 with 256 colors at pos(866 388), bmp_bpix = 8, compression = 0, fb bpix = 16
  124. _onyx_epdc_draw_bmp(): pDataBmp = 0x92001000, l = 866, t = 388, w= 139, h = 627, w_stride = 139!uboot_logo_type[0]!
  125. max17135_power_on(): enter!
  126. max17135_power_off(): enter!
  127. _onyx_epdc_draw_bmp(): cost 610 ms!
  128. [4860] <8>keymaster64: "cmd_id=MILESTONE_CALL begin"
  129. [4860] <8>keymaster64: "cmd_id=MILESTONE_CALL done with ret: 0 time taken: 0"
  130. [4870] Success [4870] Qseecom De-Init Done in Appsbl
  131. [ 0.000000] Initializing cgroup subsys cpu
  132. [ 0.000000] Initializing cgroup subsys cpuacct
  133. [ 0.000000] Linux version 3.18.120-perf-gce29d74-dirty (onyx@onyx-ubuntu) (gcc version 4.9.x 20150123 (prerelease) (GCC) ) #211 SMP PREEMPT Mon Dec 18 16:55:42 CST 2023
  134. [ 0.000000] Boot CPU: AArch64 Processor [410fd034]
  135. [ 0.000000] Machine: Qualcomm Technologies, Inc. MSM8953 + PMI8950 QRD SKU3 v3
  136. [ 0.000000] Early serial console at I/O port 0x0 (options '')
  137. [ 0.000000] bootconsole [uart0] enabled
  138. [ 0.000000] efi: Getting EFI parameters from FDT:
  139. [ 0.000000] efi: UEFI not found.
  140. [ 0.000000] Reserved memory: reserved region for node 'other_ext_region@0': base 0x0000000084a00000, size 30 MiB
  141. [ 0.000000] Reserved memory: reserved region for node 'modem_region@0': base 0x0000000086c00000, size 106 MiB
  142. [ 0.000000] Reserved memory: reserved region for node 'adsp_fw_region@0': base 0x000000008d600000, size 17 MiB
  143. [ 0.000000] Reserved memory: reserved region for node 'wcnss_fw_region@0': base 0x000000008e700000, size 7 MiB
  144. [ 0.000000] Reserved memory: reserved region for node 'dfps_data_mem@90000000': base 0x0000000090000000, size 0 MiB
  145. [ 0.000000] Reserved memory: reserved region for node 'splash_region@0x92001000': base 0x0000000092001000, size 19 MiB
  146. [ 0.000000] Reserved memory: reserved region for node 'pstore_region@0x91400000': base 0x0000000091400000, size 0 MiB
  147. [ 0.000000] Removed memory: created DMA memory pool at 0x0000000084a00000, size 30 MiB
  148. [ 0.000000] Reserved memory: initialized node other_ext_region@0, compatible id removed-dma-pool
  149. [ 0.000000] Removed memory: created DMA memory pool at 0x0000000086c00000, size 106 MiB
  150. [ 0.000000] Reserved memory: initialized node modem_region@0, compatible id removed-dma-pool
  151. [ 0.000000] Removed memory: created DMA memory pool at 0x000000008d600000, size 17 MiB
  152. [ 0.000000] Reserved memory: initialized node adsp_fw_region@0, compatible id removed-dma-pool
  153. [ 0.000000] Removed memory: created DMA memory pool at 0x000000008e700000, size 7 MiB
  154. [ 0.000000] Reserved memory: initialized node wcnss_fw_region@0, compatible id removed-dma-pool
  155. [ 0.000000] Reserved memory: allocated memory for 'venus_region@0' node: base 0x000000008f800000, size 8 MiB
  156. [ 0.000000] Reserved memory: created CMA memory pool at 0x000000008f800000, size 8 MiB
  157. [ 0.000000] Reserved memory: initialized node venus_region@0, compatible id shared-dma-pool
  158. [ 0.000000] Reserved memory: allocated memory for 'secure_region@0' node: base 0x00000000f4c00000, size 180 MiB
  159. [ 0.000000] Reserved memory: created CMA memory pool at 0x00000000f4c00000, size 180 MiB
  160. [ 0.000000] Reserved memory: initialized node secure_region@0, compatible id shared-dma-pool
  161. [ 0.000000] Reserved memory: allocated memory for 'qseecom_region@0' node: base 0x00000000f3c00000, size 16 MiB
  162. [ 0.000000] Reserved memory: created CMA memory pool at 0x00000000f3c00000, size 16 MiB
  163. [ 0.000000] Reserved memory: initialized node qseecom_region@0, compatible id shared-dma-pool
  164. [ 0.000000] Reserved memory: allocated memory for 'adsp_region@0' node: base 0x00000000f3800000, size 4 MiB
  165. [ 0.000000] Reserved memory: created CMA memory pool at 0x00000000f3800000, size 4 MiB
  166. [ 0.000000] Reserved memory: initialized node adsp_region@0, compatible id shared-dma-pool
  167. [ 0.000000] Reserved memory: allocated memory for 'gpu_region@0' node: base 0x000000008f000000, size 8 MiB
  168. [ 0.000000] Reserved memory: created CMA memory pool at 0x000000008f000000, size 8 MiB
  169. [ 0.000000] Reserved memory: initialized node gpu_region@0, compatible id shared-dma-pool
  170. [ 0.000000] cma: Reserved 16 MiB at 0x00000000f2800000
  171. [ 0.000000] psci: probing for conduit method from DT.
  172. [ 0.000000] psci: PSCIv1.0 detected in firmware.
  173. [ 0.000000] psci: Using standard PSCI v0.2 function IDs
  174. [ 0.000000] psci: Initializing psci_cpu_init
  175. [ 0.000000] psci: Initializing psci_cpu_init
  176. [ 0.000000] psci: Initializing psci_cpu_init
  177. [ 0.000000] psci: Initializing psci_cpu_init
  178. [ 0.000000] psci: Initializing psci_cpu_init
  179. [ 0.000000] psci: Initializing psci_cpu_init
  180. [ 0.000000] psci: Initializing psci_cpu_init
  181. [ 0.000000] PERCPU: Embedded 15 pages/cpu @ffffffc0e25cf000 s23168 r8192 d30080 u61440
  182. [ 0.000000] Detected VIPT I-cache on CPU0
  183. [ 0.000000] CPU features: enabling workaround for ARM erratum 845719
  184. [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 926720
  185. [ 0.000000] Kernel command line: sched_enable_hmp=1 sched_enable_power_aware=1 console=ttyHSL0,115200,n8 androidboot.console=ttyHSL0 androidboot.hardware=qcom msm_rtb.filter=0x237 ehci-hcd.park=3 lpm_levels.sleep_disabled=1 androidboot.bootdevice=7824900.sdhci earlycon=msm_hsl_uart,0x78af000 firmware_class.path=/vendor/firmware_mnt/image loop.max_part=7 buildvariant=user veritykeyid=id:7e4333f9bba00adfe0ede979e28ed1920492b40f androidboot.emmc=true androidboot.verifiedbootstate=orange androidboot.veritymode=enforcing androidboot.keymaster=1 androidboot.serialno=261a9048 gpt androidboot.baseband=msm androidboot.selinux=permissive mdss_mdp.panel=1:dsi:0:qcom,mdss_dsi_truly_1080p_cmd_epdc:1:none:cfg:single_dsi rootwait ro init=/init root=/dev/mmcblk0p24
  186. [ 0.000000] log_buf_len individual max cpu contribution: 524288 bytes
  187. [ 0.000000] log_buf_len total cpu_extra contributions: 3670016 bytes
  188. [ 0.000000] log_buf_len min size: 131072 bytes
  189. [ 0.000000] log_buf_len: 4194304 bytes
  190. [ 0.000000] early log buf free: 125168(95%)
  191. [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
  192. [ 0.000000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
  193. [ 0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
  194. [ 0.000000] Memory: 3398488K/3768320K available (13408K kernel code, 1937K rwdata, 7288K rodata, 504K init, 2509K bss, 132264K reserved, 237568K cma-reserved)
  195. [ 0.000000] Virtual kernel memory layout:
  196. [ 0.000000] vmalloc : 0xffffff8000000000 - 0xffffffbdbfff0000 ( 246 GB)
  197. [ 0.000000] vmemmap : 0xffffffbdc0000000 - 0xffffffbfc0000000 ( 8 GB maximum)
  198. [ 0.000000] 0xffffffbdc0400000 - 0xffffffbdc4000000 ( 60 MB actual)
  199. [ 0.000000] PCI I/O : 0xffffffbffa000000 - 0xffffffbffb000000 ( 16 MB)
  200. [ 0.000000] fixed : 0xffffffbffbdfb000 - 0xffffffbffbdff000 ( 16 KB)
  201. [ 0.000000] modules : 0xffffffbffc000000 - 0xffffffc000000000 ( 64 MB)
  202. [ 0.000000] memory : 0xffffffc000000000 - 0xffffffc0f0000000 ( 3840 MB)
  203. [ 0.000000] .init : 0xffffffc0014c3000 - 0xffffffc001541000 ( 504 KB)
  204. [ 0.000000] .text : 0xffffffc000080000 - 0xffffffc000d9a320 ( 13417 KB)
  205. [ 0.000000] .data : 0xffffffc001568000 - 0xffffffc00174c600 ( 1938 KB)
  206. [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
  207. [ 0.000000] HMP scheduling enabled.
  208. [ 0.000000] Preemptible hierarchical RCU implementation.
  209. [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
  210. [ 0.000000]
  211. [ 0.000000] **********************************************************
  212. [ 0.000000] ** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE **
  213. [ 0.000000] ** **
  214. [ 0.000000] ** trace_printk() being used. Allocating extra memory. **
  215. [ 0.000000] ** **
  216. [ 0.000000] ** This means that this is a DEBUG kernel and it is **
  217. [ 0.000000] ** unsafe for produciton use. **
  218. [ 0.000000] ** **
  219. [ 0.000000] ** If you see this message and you are not debugging **
  220. [ 0.000000] ** the kernel, report this immediately to your vendor! **
  221. [ 0.000000] ** **
  222. [ 0.000000] ** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE **
  223. [ 0.000000] **********************************************************
  224. [ 0.000000] NR_IRQS:64 nr_irqs:64 0
  225. [ 0.000000] mpm_init_irq_domain(): Cannot find irq controller for qcom,gpio-parent
  226. [ 0.000000] MPM 1 irq mapping errored -517
  227. [ 0.000000] Offload RCU callbacks from all CPUs
  228. [ 0.000000] Offload RCU callbacks from CPUs: 0-7.
  229. [ 0.000000] Architected cp15 and mmio timer(s) running at 19.20MHz (virt/virt).
  230. [ 0.000006] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 3579139424256ns
  231. [ 0.007993] Switched to clocksource arch_sys_counter
  232. [ 0.014093] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=192000)
  233. [ 0.023400] pid_max: default: 32768 minimum: 301
  234. [ 0.028121] Security Framework initialized
  235. [ 0.032089] SELinux: Initializing.
  236. [ 0.035656] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
  237. [ 0.042270] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
  238. [ 0.050182] Initializing cgroup subsys freezer
  239. [ 0.054466] /cpus/cpu@0: Missing clock-frequency property
  240. [ 0.059199] /cpus/cpu@1: Missing clock-frequency property
  241. [ 0.064555] /cpus/cpu@2: Missing clock-frequency property
  242. [ 0.069961] /cpus/cpu@3: Missing clock-frequency property
  243. [ 0.075321] /cpus/cpu@100: Missing clock-frequency property
  244. [ 0.080902] /cpus/cpu@101: Missing clock-frequency property
  245. [ 0.086437] /cpus/cpu@102: Missing clock-frequency property
  246. [ 0.092015] /cpus/cpu@103: Missing clock-frequency property
  247. [ 0.097576] hw perfevents: enabled with arm/armv8-pmuv3 PMU driver, 7 counters available
  248. [ 0.105663] EFI services will not be available.
  249. [ 0.110152] ASID allocator initialised with 32768 entries
  250. [ 0.115661] NOHZ: local_softirq_pending 02
  251. [ 0.128559] MSM Memory Dump base table set up
  252. [ 0.131898] MSM Memory Dump apps data table set up
  253. [ 0.136713] Configuring XPU violations to be fatal errors
  254. [ 0.144630] cpu_clock_pwr_init: Power clocks configured
  255. [ 0.154120] Detected VIPT I-cache on CPU1
  256. [ 0.154185] CPU1: Booted secondary processor [410fd034]
  257. [ 0.159189] Detected VIPT I-cache on CPU2
  258. [ 0.159234] CPU2: Booted secondary processor [410fd034]
  259. [ 0.164178] Detected VIPT I-cache on CPU3
  260. [ 0.164217] CPU3: Booted secondary processor [410fd034]
  261. [ 0.169334] Detected VIPT I-cache on CPU4
  262. [ 0.169393] CPU4: Booted secondary processor [410fd034]
  263. [ 0.174383] Detected VIPT I-cache on CPU5
  264. [ 0.174424] CPU5: Booted secondary processor [410fd034]
  265. [ 0.179402] Detected VIPT I-cache on CPU6
  266. [ 0.179443] CPU6: Booted secondary processor [410fd034]
  267. [ 0.184428] Detected VIPT I-cache on CPU7
  268. [ 0.184468] CPU7: Booted secondary processor [410fd034]
  269. [ 0.184660] Brought up 8 CPUs
  270. [ 0.251037] SMP: Total of 8 processors activated.
  271. [ 0.255784] alternatives: patching kernel code
  272. [ 0.264769] DMI not present or invalid.
  273. [ 0.277916] pinctrl core: initialized pinctrl subsystem
  274. [ 0.282763] regulator-dummy: no parameters
  275. [ 0.363912] NET: Registered protocol family 16
  276. [ 0.369802] ramoops_register_dummy start, set onyx pstore mem_address: 40000, size: 91400000
  277. [ 0.377195] ramoops: using module parameters
  278. [ 0.383193] console [pstore-1] enabled
  279. [ 0.386057] pstore: Registered ramoops as persistent store backend
  280. [ 0.392097] ramoops: attached 0x40000@0x91400000, ecc: 0/0
  281. [ 0.398562] msm_pm_tz_boot_init: set warmboot address failed
  282. [ 0.403206] scm_call failed: func id 0x42000101, ret: -1, syscall returns: 0x0, 0x0, 0x0
  283. [ 0.428092] cpuidle: using governor ladder
  284. [ 0.448084] cpuidle: using governor menu
  285. [ 0.468086] cpuidle: using governor qcom
  286. [ 0.472400] vdso: 2 pages (1 code @ ffffffc000d9f000, 1 data @ ffffffc00156c000)
  287. [ 0.478840] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
  288. [ 0.486375] software IO TLB [mem 0xebc00000-0xec000000] (4MB) mapped at [ffffffc0dbc00000-ffffffc0dbffffff]
  289. [ 0.496368] DMA: preallocated 256 KiB pool for atomic allocations
  290. [ 0.510395] __of_mpm_init(): MPM driver mapping exists
  291. [ 0.517446] platform soc:qcom,kgsl-hyp: assigned reserved memory node gpu_region@0
  292. [ 0.551510] msm_mpm_dev_probe(): Cannot get clk resource for XO: -517
  293. [ 0.562345] sps:sps is ready.
  294. [ 0.566640] msm_thermal:vdd_restriction_reg_init Defer regulator vdd-dig probe
  295. [ 0.572862] msm_thermal:probe_vdd_rstr Err regulator init. err:-517. KTM continues.
  296. [ 0.580493] msm-thermal soc:qcom,msm-thermal: probe_vdd_rstr:Failed reading node=/soc/qcom,msm-thermal, key=qcom,max-freq-level. err=-517. KTM continues
  297. [ 0.594115] msm_thermal:msm_thermal_dev_probe Failed reading node=/soc/qcom,msm-thermal, key=qcom,online-hotplug-core. err:-517
  298. [ 0.612097] cpu-clock-8953 b114000.qcom,cpu-clock-8953: Speed bin: 2 PVS Version: 0
  299. [ 0.618847] cpu-clock-8953 b114000.qcom,cpu-clock-8953: Get vdd-mx regulator!!!
  300. [ 0.627320] msm_rpm_glink_dt_parse: qcom,rpm-glink compatible not matches
  301. [ 0.633092] msm_rpm_dev_probe: APSS-RPM communication over SMD
  302. [ 0.641659] smd_channel_probe_now: allocation table not initialized
  303. [ 0.648373] smd_channel_probe_now: allocation table not initialized
  304. [ 0.654734] smd_channel_probe_now: allocation table not initialized
  305. [ 0.661830] msm_watchdog b017000.qcom,wdt: wdog absent resource not present
  306. [ 0.668163] msm_watchdog b017000.qcom,wdt: MSM Watchdog Initialized
  307. [ 0.680008] platform soc:qcom,adsprpc-mem: assigned reserved memory node adsp_region@0
  308. [ 0.689042] spmi_pmic_arb 200f000.qcom,spmi: PMIC Arb Version-2 0x20010000
  309. [ 0.698594] pm8953_s5: 400 <--> 1140 mV at 870 mV normal idle
  310. [ 0.703948] pm8953_s5_avs_limit: 400 <--> 1140 mV
  311. [ 0.708594] spm_regulator_probe: name=pm8953_s5, range=LV, voltage=870000 uV, mode=AUTO, step rate=1200 uV/us
  312. [ 0.722482] platform c200000.qcom,lpass: assigned reserved memory node adsp_fw_region@0
  313. [ 0.729909] platform 1de0000.qcom,venus: assigned reserved memory node venus_region@0
  314. [ 0.738064] platform a21b000.qcom,pronto: assigned reserved memory node wcnss_fw_region@0
  315. [ 0.747801] apc_mem_acc_corner: 0 <--> 0 mV
  316. [ 0.752903] cpr4_msm8953_apss_read_fuse_data: apc_corner: speed bin = 2
  317. [ 0.758505] cpr4_msm8953_apss_read_fuse_data: apc_corner: CPR fusing revision = 3
  318. [ 0.765944] cpr4_msm8953_apss_read_fuse_data: apc_corner: foundry id = 1
  319. [ 0.772648] cpr4_msm8953_apss_read_fuse_data: apc_corner: CPR misc fuse value = 0
  320. [ 0.780151] cpr4_msm8953_apss_read_fuse_data: apc_corner: Voltage boost fuse config = 0 boost = disable
  321. [ 0.789619] cpr4_msm8953_apss_calculate_open_loop_voltages: apc_corner: fused LowSVS: open-loop= 625000 uV
  322. [ 0.799296] cpr4_msm8953_apss_calculate_open_loop_voltages: apc_corner: fused SVS: open-loop= 680000 uV
  323. [ 0.809103] cpr4_msm8953_apss_calculate_open_loop_voltages: apc_corner: fused NOM: open-loop= 795000 uV
  324. [ 0.818912] cpr4_msm8953_apss_calculate_open_loop_voltages: apc_corner: fused TURBO_L1: open-loop= 915000 uV
  325. [ 0.828787] cpr4_msm8953_apss_calculate_target_quotients: apc_corner: fused LowSVS: quot[ 7]= 528
  326. [ 0.837733] cpr4_msm8953_apss_calculate_target_quotients: apc_corner: fused SVS: quot[ 7]= 618, quot_offset[ 7]= 90
  327. [ 0.848689] cpr4_msm8953_apss_calculate_target_quotients: apc_corner: fused NOM: quot[ 7]= 860, quot_offset[ 7]= 240
  328. [ 0.859625] cpr4_msm8953_apss_calculate_target_quotients: apc_corner: fused TURBO_L1: quot[ 7]=1100, quot_offset[ 7]= 240
  329. [ 0.870898] cpr4_apss_init_aging: apc: sensor 6 aging init quotient diff = 14, aging RO scale = 2800 QUOT/V
  330. [ 0.880478] cpr3_regulator_init_ctrl: apc: Default CPR mode = HW closed-loop
  331. [ 0.887299] apc_corner: 0 <--> 0 mV at 0 mV
  332. [ 0.894003] gfx_mem_acc_corner: 0 <--> 0 mV
  333. [ 0.898090] GFX_LDO: msm_gfx_ldo_parse_dt: Unable to parse CX parameters rc=-517
  334. [ 0.904612] GFX_LDO: msm_gfx_ldo_probe: Unable to pasrse dt rc=-517
  335. [ 0.930798] msm_mpm_dev_probe(): Cannot get clk resource for XO: -517
  336. [ 0.937125] msm_thermal:sensor_mgr_init_threshold threshold id already initialized
  337. [ 0.943962] msm_thermal:vdd_restriction_reg_init Defer regulator vdd-dig probe
  338. [ 0.950983] msm_thermal:probe_vdd_rstr Err regulator init. err:-517. KTM continues.
  339. [ 0.958626] msm-thermal soc:qcom,msm-thermal: probe_vdd_rstr:Failed reading node=/soc/qcom,msm-thermal, key=qcom,max-freq-level. err=-517. KTM continues
  340. [ 0.972248] msm_thermal:msm_thermal_dev_probe Failed reading node=/soc/qcom,msm-thermal, key=qcom,online-hotplug-core. err:-517
  341. [ 0.984074] cpu-clock-8953 b114000.qcom,cpu-clock-8953: Speed bin: 2 PVS Version: 0
  342. [ 0.991446] cpu-clock-8953 b114000.qcom,cpu-clock-8953: Get vdd-mx regulator!!!
  343. [ 0.998722] msm_rpm_glink_dt_parse: qcom,rpm-glink compatible not matches
  344. [ 1.005388] msm_rpm_dev_probe: APSS-RPM communication over SMD
  345. [ 1.012115] pm8953_s1: 870 <--> 1156 mV at 1000 mV normal idle
  346. [ 1.018240] pm8953_s2_level: 0 <--> 0 mV at 0 mV normal idle
  347. [ 1.023776] pm8953_s2_floor_level: 0 <--> 0 mV at 0 mV normal idle
  348. [ 1.030109] pm8953_s2_level_ao: 0 <--> 0 mV at 0 mV normal idle
  349. [ 1.036251] pm8953_s3: 1225 mV normal idle
  350. [ 1.040420] pm8953_s4: 1900 <--> 2050 mV at 1900 mV normal idle
  351. [ 1.046380] pm8953_s7_level: 0 <--> 0 mV at 0 mV normal idle
  352. [ 1.051988] pm8953_s7_level_ao: 0 <--> 0 mV at 0 mV normal idle
  353. [ 1.057943] pm8953_s7_level_so: 0 <--> 0 mV at 0 mV normal idle
  354. [ 1.064199] pm8953_l1: 1000 <--> 1100 mV at 1000 mV normal idle
  355. [ 1.070168] pm8953_l2: 975 <--> 1225 mV at 975 mV normal idle
  356. [ 1.075991] pm8953_l3: 925 mV normal idle
  357. [ 1.080071] pm8953_l5: 1800 mV normal idle
  358. [ 1.084235] pm8953_l6: 1800 mV normal idle
  359. [ 1.088406] pm8953_l7: 1800 <--> 1900 mV at 1800 mV normal idle
  360. [ 1.094155] pm8953_l7_ao: 1800 <--> 1900 mV at 1800 mV normal idle
  361. [ 1.100676] pm8953_l8: 2900 mV normal idle
  362. [ 1.104827] pm8953_l9: 3000 <--> 3300 mV at 3000 mV normal idle
  363. [ 1.110816] pm8953_l10: 2850 mV normal idle
  364. [ 1.115077] pm8953_l11: 2950 mV normal idle
  365. [ 1.119334] pm8953_l12: 1800 <--> 2950 mV at 1800 mV normal idle
  366. [ 1.125399] pm8953_l13: 3125 mV normal idle
  367. [ 1.129659] pm8953_l14: 3000 mV normal idle
  368. [ 1.133918] pm8953_l15: 3000 mV normal idle
  369. [ 1.138168] pm8953_l16: 1800 mV normal idle
  370. [ 1.142420] pm8953_l17: 1800 <--> 3150 mV at 3150 mV normal idle
  371. [ 1.148503] pm8953_l19: 1200 <--> 1350 mV at 1200 mV normal idle
  372. [ 1.154582] pm8953_l22: 3000 mV normal idle
  373. [ 1.158835] pm8953_l23: 1225 mV normal idle
  374. [ 1.163058] GFX_LDO: msm_gfx_ldo_voltage_init: LDO corner 1: target-volt = 580000 uV
  375. [ 1.169815] GFX_LDO: msm_gfx_ldo_voltage_init: LDO corner 2: target-volt = 650000 uV
  376. [ 1.177519] GFX_LDO: msm_gfx_ldo_voltage_init: LDO corner 3: target-volt = 720000 uV
  377. [ 1.185268] GFX_LDO: msm_gfx_ldo_adjust_init_voltage: adjusted the open-loop voltage[1] 580000 -> 615000
  378. [ 1.194723] GFX_LDO: msm_gfx_ldo_adjust_init_voltage: adjusted the open-loop voltage[2] 650000 -> 675000
  379. [ 1.204194] GFX_LDO: msm_gfx_ldo_voltage_init: LDO-mode fuse disabled by default
  380. [ 1.212074] msm_gfx_ldo: 0 <--> 0 mV at 0 mV
  381. [ 1.216480] msm_mpm_dev_probe(): Cannot get clk resource for XO: -517
  382. [ 1.223280] msm_thermal:sensor_mgr_init_threshold threshold id already initialized
  383. [ 1.230944] cpu cpu0: dev_pm_opp_get_opp_count: device OPP not found (-19)
  384. [ 1.236782] msm_thermal:get_cpu_freq_plan_len Error reading CPU0 freq table len. error:-19
  385. [ 1.245056] cpu cpu4: dev_pm_opp_get_opp_count: device OPP not found (-19)
  386. [ 1.251902] msm_thermal:get_cpu_freq_plan_len Error reading CPU4 freq table len. error:-19
  387. [ 1.260147] msm_thermal:vdd_restriction_reg_init Defer vdd rstr freq init.
  388. [ 1.269217] cpu cpu0: dev_pm_opp_get_opp_count: device OPP not found (-19)
  389. [ 1.275053] msm_thermal:get_cpu_freq_plan_len Error reading CPU0 freq table len. error:-19
  390. [ 1.284032] qcom,gcc-8953 1800000.qcom,gcc: Venus speed bin: 2
  391. [ 1.289549] cpu cpu4: dev_pm_opp_get_opp_count: device OPP not found (-19)
  392. [ 1.295974] msm_thermal:get_cpu_freq_plan_len Error reading CPU4 freq table len. error:-19
  393. [ 1.304253] cpu cpu0: dev_pm_opp_get_opp_count: device OPP not found (-19)
  394. [ 1.311097] msm_thermal:get_cpu_freq_plan_len Error reading CPU0 freq table len. error:-19
  395. [ 1.319349] cpu cpu4: dev_pm_opp_get_opp_count: device OPP not found (-19)
  396. [ 1.326181] msm_thermal:get_cpu_freq_plan_len Error reading CPU4 freq table len. error:-19
  397. [ 1.338207] branch_clk_handoff: gcc_usb_phy_cfg_ahb_clk clock is enabled in HW
  398. [ 1.344219] branch_clk_handoff: even though ENABLE_BIT is not set
  399. [ 1.354833] qcom,gcc-8953 1800000.qcom,gcc: Registered GCC clocks
  400. [ 1.360164] cpu-clock-8953 b114000.qcom,cpu-clock-8953: Speed bin: 2 PVS Version: 0
  401. [ 1.371644] cpu-clock-8953 b114000.qcom,cpu-clock-8953: missing qcom,dfs-sid-c0
  402. [ 1.377918] cpu-clock-8953 b114000.qcom,cpu-clock-8953: No DFS SID tables found for Cluster-0
  403. [ 1.386452] cpu-clock-8953 b114000.qcom,cpu-clock-8953: missing qcom,link-sid-c0
  404. [ 1.393823] cpu-clock-8953 b114000.qcom,cpu-clock-8953: No Link SID tables found for Cluster-0
  405. [ 1.402418] cpu-clock-8953 b114000.qcom,cpu-clock-8953: missing qcom,lmh-sid-c0
  406. [ 1.409707] cpu-clock-8953 b114000.qcom,cpu-clock-8953: No LMH SID tables found for Cluster-0
  407. [ 1.418216] ramp_lmh_sid: Use Default LMH SID
  408. [ 1.422530] ramp_dfs_sid: Use Default DFS SID
  409. [ 1.426870] ramp_link_sid: Use Default Link SID
  410. [ 1.431457] cpu-clock-8953 b114000.qcom,cpu-clock-8953: missing qcom,dfs-sid-c1
  411. [ 1.438702] cpu-clock-8953 b114000.qcom,cpu-clock-8953: No DFS SID tables found for Cluster-1
  412. [ 1.447188] cpu-clock-8953 b114000.qcom,cpu-clock-8953: missing qcom,link-sid-c1
  413. [ 1.454586] cpu-clock-8953 b114000.qcom,cpu-clock-8953: No Link SID tables found for Cluster-1
  414. [ 1.463181] cpu-clock-8953 b114000.qcom,cpu-clock-8953: missing qcom,lmh-sid-c1
  415. [ 1.470471] cpu-clock-8953 b114000.qcom,cpu-clock-8953: No LMH SID tables found for Cluster-1
  416. [ 1.478974] ramp_lmh_sid: Use Default LMH SID
  417. [ 1.483292] ramp_dfs_sid: Use Default DFS SID
  418. [ 1.487633] ramp_link_sid: Use Default Link SID
  419. [ 1.492248] clock_rcgwr_init: RCGwR Init Completed
  420. [ 1.497521] populate_opp_table: clock-cpu-8953: OPP tables populated (cpu 3 and 7)
  421. [ 1.504587] print_opp_table: clock_cpu: a53 C0: OPP voltage for 652800000: 1
  422. [ 1.511612] print_opp_table: clock_cpu: a53 C0: OPP voltage for 2016000000: 7
  423. [ 1.518732] print_opp_table: clock_cpu: a53 C1: OPP voltage for 652800000: 1
  424. [ 1.525742] print_opp_table: clock_cpu: a53 C2: OPP voltage for 2016000000: 7
  425. [ 1.535926] gcc-gfx-8953 1800000.qcom,gcc-gfx: Registered GCC GFX clocks.
  426. [ 1.600309] qcom,qpnp-pin qpnp-pin-14: qpnp_pin_probe: no device nodes specified in topology
  427. [ 1.607725] qcom,qpnp-pin: probe of qpnp-pin-14 failed with error -22
  428. [ 1.614197] qcom,qpnp-pin qpnp-pin-15: qpnp_pin_probe: no device nodes specified in topology
  429. [ 1.622580] qcom,qpnp-pin: probe of qpnp-pin-15 failed with error -22
  430. [ 1.629395] msm_cpuss_dump soc:cpuss_dump: Couldn't get memory for dumping
  431. [ 1.635845] msm_cpuss_dump soc:cpuss_dump: Couldn't get memory for dumping
  432. [ 1.646663] KPI: Bootloader start count = 25916
  433. [ 1.650196] KPI: Bootloader end count = 185898
  434. [ 1.654584] KPI: Bootloader display count = 55624
  435. [ 1.659289] KPI: Bootloader load kernel count = 1865
  436. [ 1.664219] KPI: Kernel MPM timestamp = 273909
  437. [ 1.668673] KPI: Kernel MPM Clock frequency = 32768
  438. [ 1.673529] socinfo_print: v0.10, id=293, ver=1.1, raw_id=70, raw_ver=1, hw_plat=11, hw_plat_ver=131072
  439. [ 1.673529] accessory_chip=0, hw_plat_subtype=0, pmic_model=65558, pmic_die_revision=65536 foundry_id=2 serial_number=86786307
  440. [ 1.695666] eldo2_8953: no parameters
  441. [ 1.698917] qpnp_pin_of_gpio_xlate: no such PMIC gpio 5 in device topology
  442. [ 1.705281] adv_vreg: no parameters
  443. [ 1.709534] vgaarb: loaded
  444. [ 1.712870] SCSI subsystem initialized
  445. [ 1.716748] usbcore: registered new interface driver usbfs
  446. [ 1.721294] usbcore: registered new interface driver hub
  447. [ 1.726712] usbcore: registered new device driver usb
  448. [ 1.733156] i2c-msm-v2 78b6000.i2c: probing driver i2c-msm-v2
  449. [ 1.738246] AXI: msm_bus_scale_register_client(): msm_bus_scale_register_client: Bus driver not ready.
  450. [ 1.746980] i2c-msm-v2 78b6000.i2c: msm_bus_scale_register_client(mstr-id:86):0 (not a problem)
  451. [ 1.756328] i2c i2c-2: No recover_bus() found, not using recovery
  452. [ 1.763121] i2c-msm-v2 78b7000.i2c: probing driver i2c-msm-v2
  453. [ 1.768149] AXI: msm_bus_scale_register_client(): msm_bus_scale_register_client: Bus driver not ready.
  454. [ 1.776948] i2c-msm-v2 78b7000.i2c: msm_bus_scale_register_client(mstr-id:86):0 (not a problem)
  455. [ 1.786118] i2c-msm-v2 78b7000.i2c: irq:176 when no active transfer
  456. [ 1.792837] i2c-msm-v2 7af5000.i2c: probing driver i2c-msm-v2
  457. [ 1.798038] AXI: msm_bus_scale_register_client(): msm_bus_scale_register_client: Bus driver not ready.
  458. [ 1.806894] i2c-msm-v2 7af5000.i2c: msm_bus_scale_register_client(mstr-id:84):0 (not a problem)
  459. [ 1.816265] i2c i2c-5: No recover_bus() found, not using recovery
  460. [ 1.822576] i2c-msm-v2 7af8000.i2c: probing driver i2c-msm-v2
  461. [ 1.827797] AXI: msm_bus_scale_register_client(): msm_bus_scale_register_client: Bus driver not ready.
  462. [ 1.836696] i2c-msm-v2 7af8000.i2c: msm_bus_scale_register_client(mstr-id:84):0 (not a problem)
  463. [ 1.846135] i2c i2c-8: No recover_bus() found, not using recovery
  464. [ 1.852768] media: Linux media interface: v0.10
  465. [ 1.856328] Linux video capture interface: v2.00
  466. [ 1.860981] EDAC MC: Ver: 3.0.0
  467. [ 1.948227] cpufreq: driver msm up and running
  468. [ 1.952166] platform soc:qcom,ion:qcom,ion-heap@8: assigned reserved memory node secure_region@0
  469. [ 1.960637] platform soc:qcom,ion:qcom,ion-heap@27: assigned reserved memory node qseecom_region@0
  470. [ 1.969730] ION heap system created
  471. [ 1.972960] ION heap mm created at 0x00000000f4c00000 with size b400000
  472. [ 1.979432] ION heap qsecom created at 0x00000000f3c00000 with size 1000000
  473. [ 1.986945] msm_bus_fabric_init_driver
  474. [ 1.990949] msm_bus_device 580000.ad-hoc-bus: Coresight support absent for bus: 2048
  475. [ 2.006997] qcom,qpnp-power-on qpnp-power-on-1: PMIC@SID0 Power-on reason: Triggered from PON1 (secondary PMIC) and 'warm' boot
  476. [ 2.017450] qcom,qpnp-power-on qpnp-power-on-1: PMIC@SID0: Power-off reason: Triggered from KPDPWR_N (Long Power Key hold)
  477. [ 2.028613] input: qpnp_pon as /devices/virtual/input/input0
  478. [ 2.034669] pon_spare_reg: no parameters
  479. [ 2.038147] qcom,qpnp-power-on qpnp-power-on-12: No PON config. specified
  480. [ 2.044811] qcom,qpnp-power-on qpnp-power-on-12: PMIC@SID2 Power-on reason: Triggered from PON1 (secondary PMIC) and 'warm' boot
  481. [ 2.056335] qcom,qpnp-power-on qpnp-power-on-12: PMIC@SID2: Unknown power-off reason
  482. [ 2.064213] PMIC@SID0: (null) v1.0 options: 2, 2, 0, 0
  483. [ 2.069261] PMIC@SID2: PMI8950 v2.0 options: 0, 0, 0, 0
  484. [ 2.075044] ipa ipa2_uc_state_check:296 uC interface not initialized
  485. [ 2.080724] ipa ipa_sps_irq_control_all:945 EP (2) not allocated.
  486. [ 2.086783] ipa ipa_sps_irq_control_all:945 EP (5) not allocated.
  487. [ 2.094359] sps:BAM 0x0000000007904000 is registered.
  488. [ 2.098706] sps:BAM 0x0000000007904000 (va:0xffffff80016c0000) enabled: ver:0x27, number of pipes:20
  489. [ 2.110737] IPA driver initialization was successful.
  490. [ 2.115643] gdsc_venus: no parameters
  491. [ 2.118720] gdsc_mdss: no parameters
  492. [ 2.122257] gdsc_jpeg: no parameters
  493. [ 2.125958] gdsc_vfe: no parameters
  494. [ 2.129454] gdsc_vfe1: no parameters
  495. [ 2.132831] gdsc_cpp: no parameters
  496. [ 2.136269] gdsc_oxili_gx: no parameters
  497. [ 2.139978] gdsc_oxili_gx: supplied by msm_gfx_ldo
  498. [ 2.145003] gdsc_venus_core0: fast normal
  499. [ 2.149064] gdsc_oxili_cx: no parameters
  500. [ 2.152916] gdsc_usb30: no parameters
  501. [ 2.157318] mdss_pll_probe: MDSS pll label = MDSS DSI 0 PLL
  502. [ 2.161889] mdss_pll_probe: mdss_pll_probe: label=MDSS DSI 0 PLL PLL SSC enabled
  503. [ 2.169277] mdss_pll_util_parse_dt_supply: : error reading ulp load. rc=-22
  504. [ 2.177335] dsi_pll_clock_register_8996: Registered DSI PLL ndx=0 clocks successfully
  505. [ 2.184147] mdss_pll_probe: MDSS pll label = MDSS DSI 1 PLL
  506. [ 2.189683] mdss_pll_probe: mdss_pll_probe: label=MDSS DSI 1 PLL PLL SSC enabled
  507. [ 2.197060] mdss_pll_util_parse_dt_supply: : error reading ulp load. rc=-22
  508. [ 2.205142] pll_is_pll_locked_8996: DSI PLL ndx=1 status=0 failed to Lock
  509. [ 2.211816] dsi_pll_clock_register_8996: Registered DSI PLL ndx=1 clocks successfully
  510. [ 2.219141] msm_iommu 1e00000.qcom,iommu: device apps_iommu (model: 500) mapped at ffffff8001c80000, with 21 ctx banks
  511. [ 2.234975] msm_iommu_ctx 1e20000.qcom,iommu-ctx: context adsp_elf using bank 0
  512. [ 2.241388] msm_iommu_ctx 1e21000.qcom,iommu-ctx: context adsp_sec_pixel using bank 1
  513. [ 2.249199] msm_iommu_ctx 1e22000.qcom,iommu-ctx: context mdp_1 using bank 2
  514. [ 2.256213] msm_iommu_ctx 1e23000.qcom,iommu-ctx: context venus_fw using bank 3
  515. [ 2.263521] msm_iommu_ctx 1e24000.qcom,iommu-ctx: context venus_sec_non_pixel using bank 4
  516. [ 2.271771] msm_iommu_ctx 1e25000.qcom,iommu-ctx: context venus_sec_bitstream using bank 5
  517. [ 2.280012] msm_iommu_ctx 1e26000.qcom,iommu-ctx: context venus_sec_pixel using bank 6
  518. [ 2.287921] msm_iommu_ctx 1e28000.qcom,iommu-ctx: context pronto_pil using bank 8
  519. [ 2.295406] msm_iommu_ctx 1e29000.qcom,iommu-ctx: context q6 using bank 9
  520. [ 2.302172] msm_iommu_ctx 1e2a000.qcom,iommu-ctx: context periph_rpm using bank 10
  521. [ 2.309728] msm_iommu_ctx 1e2b000.qcom,iommu-ctx: context lpass using bank 11
  522. [ 2.316827] msm_iommu_ctx 1e2f000.qcom,iommu-ctx: context adsp_io using bank 15
  523. [ 2.324132] msm_iommu_ctx 1e30000.qcom,iommu-ctx: context adsp_opendsp using bank 16
  524. [ 2.331858] msm_iommu_ctx 1e31000.qcom,iommu-ctx: context adsp_shared using bank 17
  525. [ 2.339499] msm_iommu_ctx 1e32000.qcom,iommu-ctx: context cpp using bank 18
  526. [ 2.346430] msm_iommu_ctx 1e33000.qcom,iommu-ctx: context jpeg_enc0 using bank 19
  527. [ 2.353906] msm_iommu_ctx 1e34000.qcom,iommu-ctx: context vfe using bank 20
  528. [ 2.360850] msm_iommu_ctx 1e35000.qcom,iommu-ctx: context mdp_0 using bank 21
  529. [ 2.367965] msm_iommu_ctx 1e36000.qcom,iommu-ctx: context venus_ns using bank 22
  530. [ 2.375347] msm_iommu_ctx 1e38000.qcom,iommu-ctx: context ipa using bank 24
  531. [ 2.382292] msm_iommu_ctx 1e37000.qcom,iommu-ctx: context access_control using bank 23
  532. [ 2.392318] arm-smmu 1c40000.arm,smmu-kgsl: regulator defer delay 80
  533. [ 2.399557] Advanced Linux Sound Architecture Driver Initialized.
  534. [ 2.405393] Bluetooth: ffffffc0dd063d08
  535. [ 2.408285] NET: Registered protocol family 31
  536. [ 2.412848] Bluetooth: ffffffc0dd063d08
  537. [ 2.416499] Bluetooth: ffffffc0dd063ce8Bluetooth: ffffffc0dd063cc8
  538. [ 2.422684] Bluetooth: ffffffc0dd063cc8[ 2.426765] cfg80211: Calling CRDA to update world regulatory domain
  539. [ 2.432841] cfg80211: World regulatory domain updated:
  540. [ 2.432914] pcie:pcie_init.
  541. [ 2.434184] tc358762_driver_init(): enter!
  542. [ 2.434274] tc358762 2-000b: invalid io_power_3v3_peri.gpio: -2
  543. [ 2.434410] 2-000b supply vddc not found, using dummy regulator
  544. [ 2.456607] cfg80211: DFS Master region: unset
  545. [ 2.460948] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
  546. [ 2.470672] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
  547. [ 2.478658] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
  548. [ 2.486634] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
  549. [ 2.488014] tc358762_parse_dt(): output_control_enable[0] timing_index[1] io_power_3v3_peri[-2], io_power_3v3_io[-2], io_power_1v2[97], io_power_down[13], io_reset[12] active[0]!
  550. [ 2.488540] tc358762_power_ctrl(): active 0 0 1 1 0!
  551. [ 2.496770] i2c-msm-v2 78b6000.i2c: msm_bus_scale_register_client(mstr-id:86):0x2 (ok)
  552. [ 2.523363] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
  553. [ 2.528314] tc358762_probe(): read version id[0x6200]!
  554. [ 2.536461] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
  555. [ 2.543455] tc358762_probe(): read Reg[0x0470] = [0x68420000]!
  556. [ 2.543471] register_ebc_transiver_ops(): OK!
  557. [ 2.543472] tc358762_probe(): OK!
  558. [ 2.557902] cfg80211: (5490000 KHz - 5710000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
  559. [ 2.559312] max17135_detect(): Max17135 PMIC!
  560. [ 2.559479] max17135-pmic max17135-pmic: vneg_pwrup 10, gvee_pwrup 0, vpos_pwrup 20, gvdd_pwrup 25gvdd_pwrdn 0, vpos_pwrdn 3, vneg_pwrdn 10, gvee_pwrdn 20
  561. [ 2.559481] max17135-pmic max17135-pmic: max_wait 24
  562. [ 2.559485] max17135-pmic max17135-pmic: no control_mode available! use deault val!
  563. [ 2.559487] max17135-pmic max17135-pmic: color panel mode is (disabled)!
  564. [ 2.559637] max17135_pmic_dt_parse_pdata(): set vdd 3000000 uV!
  565. [ 2.559649] max17135-pmic max17135-pmic: no epdc pmic intr pin available
  566. [ 2.559652] max17135-pmic max17135-pmic: no epdc pmic vcom sw pin available
  567. [ 2.559657] max17135-pmic max17135-pmic: gpio_pmic_wakeup = 94, gpio_pmic_vcom_ctrl = 89, gpio_pmic_v3p3 = -2, gpio_pmic_pwrgood = 90, gpio_pmic_intr = -2, gpio_pmic_vcom_sw =-2!
  568. [ 2.559658] max17135_pmic_dt_parse_pdata(): OK!
  569. [ 2.560094] VCOM has been setup to [-1670000]
  570. [ 2.560166] DISPLAY: no parameters
  571. [ 2.560788] VCOM: -4325 <--> -500 mV
  572. [ 2.561384] V3P3: no parameters
  573. [ 2.561537] TMST: at 0 mV
  574. [ 2.565094] timing1: [0], gvee_pwrup=0
  575. [ 2.565095] timing2: [10], vneg_pwrup=10
  576. [ 2.565097] timing3: [20], vpos_pwrup=20
  577. [ 2.565098] timing4: [25], gvdd_pwrup=25
  578. [ 2.565099] timing5: [0], gvdd_pwrdn=0
  579. [ 2.565101] timing6: [3], vpos_pwrdn=3
  580. [ 2.565102] timing7: [10], vneg_pwrdn=10
  581. [ 2.565103] timing8: [20], gvee_pwrdn=20
  582. [ 2.565105] max17135_regulator_probe(): OK!
  583. [ 2.565205] max17135 2-0048: PMIC MAX17135 for eInk display
  584. [ 2.565225] i2c-core: driver [max17135] using legacy suspend method
  585. [ 2.565226] i2c-core: driver [max17135] using legacy resume method
  586. [ 2.565748] Switched to clocksource arch_sys_counter
  587. [ 2.640425] tps6518x_init(): OK!
  588. [ 2.640464] i2c-core: driver [tps6518x] using legacy suspend method
  589. [ 2.640465] i2c-core: driver [tps6518x] using legacy resume method
  590. [ 2.643283] onyx,onyx-config soc:onyx-config: request usb_id(1021) for onyx_usb_otg_id
  591. [ 2.643287] onyx,onyx-config soc:onyx-config: gps_rf-gpio not specified
  592. [ 2.744594] NET: Registered protocol family 2
  593. [ 2.752868] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
  594. [ 2.760862] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
  595. [ 2.769323] TCP established hash table entries: 32768 (order: 6, 262144 bytes)
  596. [ 2.776284] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
  597. [ 2.783060] TCP: Hash tables configured (established 32768 bind 32768)
  598. [ 2.789288] TCP: reno registered
  599. [ 2.792453] UDP hash table entries: 2048 (order: 4, 65536 bytes)
  600. [ 2.798497] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
  601. [ 2.805031] NET: Registered protocol family 1
  602. [ 2.811907] gcc-mdss-8953 1800000.qcom,gcc-mdss: Registered GCC MDSS clocks.
  603. [ 2.818388] Trying to unpack rootfs image as initramfs...
  604. [ 2.992241] Freeing initrd memory: 7080K
  605. [ 2.999130] futex hash table entries: 2048 (order: 5, 131072 bytes)
  606. [ 3.004431] Initialise system trusted keyring
  607. [ 3.008756] audit: initializing netlink subsys (disabled)
  608. [ 3.014109] audit: type=2000 audit(2.999:1): initialized
  609. [ 3.019781] vmscan: error setting kswapd cpu affinity mask
  610. [ 3.028442] zbud: loaded
  611. [ 3.030205] VFS: Disk quotas dquot_6.5.2
  612. [ 3.033926] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
  613. [ 3.041121] Registering sdcardfs 0.1
  614. [ 3.043991] fuse init (API version 7.23)
  615. [ 3.049821] Key type asymmetric registered
  616. [ 3.052873] Asymmetric key parser 'x509' registered
  617. [ 3.057825] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246)
  618. [ 3.065130] io scheduler noop registered
  619. [ 3.069031] io scheduler deadline registered
  620. [ 3.073395] io scheduler cfq registered (default)
  621. [ 3.081780] lm3630a_parse_dt: failed to get lm3630,dual_control
  622. [ 3.086652] lm3630a_parse_dt: max_current =0xA max_brightness = 0xFF default_brightness = 0x0
  623. [ 3.095261] lm3630a_parse_dt: bank_sel = 6 bank_swap = 1 pwm_enable = 0
  624. [ 3.102317] i2c-msm-v2 7af8000.i2c: msm_bus_scale_register_client(mstr-id:84):0x3 (ok)
  625. [ 3.110452] lm3630a found. read REG_REVISION[0x2].
  626. [ 3.114799] lm3630a_bl 8-0038: LM3630A backlight register OK.
  627. [ 3.120755] msm_dss_get_res_byname: 'vbif_nrt_phys' resource not found
  628. [ 3.126932] mdss_mdp_probe+0x25c/0x115c->msm_dss_ioremap_byname: 'vbif_nrt_phys' msm_dss_get_res_byname failed
  629. [ 3.137529] mdss_mdp_irq_clk_register: unable to get clk: lut_clk
  630. [ 3.143536] No change in context(0==0), skip
  631. [ 3.147923] mdss_mdp_pipe_addr_setup: type:0 ftchid:-1 xinid:0 num:0 rect:0 ndx:0x1 prio:0
  632. [ 3.155514] mdss_mdp_pipe_addr_setup: type:1 ftchid:-1 xinid:1 num:3 rect:0 ndx:0x8 prio:1
  633. [ 3.163748] mdss_mdp_pipe_addr_setup: type:1 ftchid:-1 xinid:5 num:4 rect:0 ndx:0x10 prio:2
  634. [ 3.172089] mdss_mdp_pipe_addr_setup: type:2 ftchid:-1 xinid:2 num:6 rect:0 ndx:0x40 prio:3
  635. [ 3.180423] mdss_mdp_pipe_addr_setup: type:3 ftchid:-1 xinid:7 num:10 rect:0 ndx:0x400 prio:0
  636. [ 3.188926] mdss_mdp_parse_dt_handler: Error from prop qcom,mdss-pipe-sw-reset-off : u32 array read
  637. [ 3.198035] mdss_mdp_parse_dt_handler: Error from prop qcom,mdss-ib-factor-overlap : u32 array read
  638. [ 3.207273] xlog_status: enable:1, panic:1, dump:2
  639. [ 3.212436] mdss_mdp_probe: mdss version = 0x10100000, bootloader display is on, num 1, intf_sel=0x00000100
  640. [ 3.223331] mdss_smmu_util_parse_dt_clock: clocks are not defined
  641. [ 3.228432] mdss_smmu_probe: iommu v2 domain[0] mapping and clk register successful!
  642. [ 3.236120] mdss_smmu_util_parse_dt_clock: clocks are not defined
  643. [ 3.242219] mdss_smmu_probe: iommu v2 domain[2] mapping and clk register successful!
  644. [ 3.251052] mdss_dsi_get_dt_vreg_data: error reading ulp load. rc=-22
  645. [ 3.256454] mdss_dsi_get_dt_vreg_data: error reading ulp load. rc=-22
  646. [ 3.262890] mdss_dsi_get_dt_vreg_data: error reading ulp load. rc=-22
  647. [ 3.270092] mdss_dsi_ctrl_probe: DSI Ctrl name = MDSS DSI CTRL->0
  648. [ 3.275818] mdss_dsi_find_panel_of_node: epdc force parse panel info from dts!!
  649. [ 3.282719] mdss_dsi_panel_init: Panel Name = truly 1080p cmd mode dsi panel
  650. [ 3.289798] mdss_dsi_panel_timing_from_dt: found new timing "qcom,mdss_dsi_truly_1080p_cmd" (ffffffc0dd0632a0)
  651. [ 3.299697] mdss_dsi_parse_dcs_cmds: failed, key=qcom,mdss-dsi-post-panel-on-command
  652. [ 3.307400] mdss_dsi_parse_dcs_cmds: failed, key=qcom,mdss-dsi-timing-switch-command
  653. [ 3.315138] mdss_dsi_panel_get_dsc_cfg_np: cannot find dsc config node:
  654. [ 3.321761] mdss_dsi_clk_refresh mdss_dsi_clk_set_link_rate ctrl_pdata->byte_clk_rate(every lane)=365249925 ctrl_pdata->pclk_rate(all lanes)=243499950
  655. [ 3.335221] mdss_dsi_parse_dcs_cmds: failed, key=qcom,mdss-dsi-off-command
  656. [ 3.342049] mdss_dsi_parse_dcs_cmds: failed, key=qcom,mdss-dsi-idle-on-command
  657. [ 3.349253] mdss_dsi_parse_dcs_cmds: failed, key=qcom,mdss-dsi-idle-off-command
  658. [ 3.356539] mdss_dsi_parse_panel_features: partial_update_enabled=0
  659. [ 3.362860] mdss_dsi_parse_panel_features: ulps feature enabled
  660. [ 3.368700] mdss_dsi_parse_panel_features: ulps during suspend feature disabled
  661. [ 3.375803] mdss_dsi_parse_dms_config: dynamic switch feature enabled: 0
  662. [ 3.382682] mdss_dsi_parse_dcs_cmds: failed, key=qcom,mdss-dsi-lp-mode-on
  663. [ 3.389444] mdss_dsi_parse_dcs_cmds: failed, key=qcom,mdss-dsi-lp-mode-off
  664. [ 3.396295] onyx_epdc_set_screen_info(): enter! screen->face = 0!
  665. [ 3.402537] onyx_get_eink_screen_timing(): get gdck_sta failed! maybe not need.
  666. [ 3.409669] onyx_get_eink_screen_timing(): get lgonl failed! maybe not need.
  667. [ 3.416687] onyx_get_eink_screen_timing(): get color_panel failed! set default val 0!
  668. [ 3.424512] onyx_get_eink_screen_timing(): get waveform_file_format failed! set default val 0!
  669. [ 3.433105] onyx_get_eink_screen_timing(): get half_empty failed! set default val 0!
  670. [ 3.440832] onyx_get_eink_screen_timing(): no gdlr_gpio pin available
  671. [ 3.447248] onyx_get_eink_screen_timing(): [ES103TC1 timing] -- panel_width = 16, sdclk-frequency = 40000000HZ, xres = 1872, yres = 1404, left_margin = 10, right_margin = 70, upper_margin = 4, lower_margin = 14, hsync_len = 15, vsync_len = 1!
  672. [ 3.468698] onyx_get_eink_screen_timing(): color_panel = 0, waveform_file_format = 0, half_empty = 0, sdshr = 0, gdlr = 0, density = 240!
  673. [ 3.481024] onyx_epdc_set_timing: oringin -- width = 1872, heigh = 1404, lsl=15, lbl=10, lel=70, fsl=1, fbl=4, fel=14, frame_rate = 87!
  674. [ 3.493178] onyx_epdc_set_timing: adjust -- width = 1872, heigh = 1404, lsl=15, lbl=10, lel=66, ldl=234, fsl=1, fbl=4, fel=14, bitspanel = 16!
  675. [ 3.506022] onyx_epdc_set_timing: adjust -- xres_lcd_data = 325, yres_lcd_data = 1423! gdck_sta[0] lgonl[0].
  676. [ 3.515927] mdss_dsi_clk_div_config(): h_back_porch[1], v_back_porch[1] Bpp[3]!
  677. [ 3.523210] dsi_panel_device_register: pclk(all lanes)=40387488, byteclk(every lanes)=60581232
  678. [ 3.531842] mdss_dsi_get_dt_vreg_data: error reading ulp load. rc=-22
  679. [ 3.538253] 1a94000.qcom,mdss_dsi_ctrl0 supply vdd not found, using dummy regulator
  680. [ 3.545942] mdss_dsi_parse_ctrl_params:4090 Unable to read qcom,display-id, data=0000000000000000,len=20
  681. [ 3.555336] mdss_dsi_parse_gpio_params: bklt_en gpio not specified
  682. [ 3.561522] msm_dss_get_res_byname: 'dsi_phy_regulator' resource not found
  683. [ 3.568355] mdss_dsi_retrieve_ctrl_resources+0x170/0x1f4->msm_dss_ioremap_byname: 'dsi_phy_regulator' msm_dss_get_res_byname failed
  684. [ 3.580155] mdss_dsi_retrieve_ctrl_resources: ctrl_base=ffffff80005fe000 ctrl_size=400 phy_base=ffffff8000e7c400 phy_size=580
  685. [ 3.591515] dsi_panel_device_register: Continuous splash enabled
  686. [ 3.597678] mdss_register_panel: adding framebuffer device 1a94000.qcom,mdss_dsi_ctrl0
  687. [ 3.605563] mdss_dsi_set_clk_rates: mdss_dsi_clk_set_link_rate pclk(all lanes)=40387488, byteclk(every lanes)=60581232
  688. [ 3.616906] mdss_dsi_ctrl_probe: Dsi Ctrl->0 initialized, DSI rev:0x10040002, PHY rev:0x2
  689. [ 3.624325] mdss_dsi_status_init: DSI status check interval:5000
  690. [ 3.631062] mdss_register_panel: adding framebuffer device soc:qcom,mdss_wb_panel
  691. [ 3.638160] mdss_fb_probe: fb0: split_mode:0 left:0 right:0
  692. [ 3.644313] mdss_fb_register: FrameBuffer[0] 1872x1404 registered successfully!
  693. [ 3.651040] onyx_mdss_mdp_epdc_init(): epdc image w[325] h[1423] face[24]
  694. [ 3.657380] mdss_mdp_epdc_splash_parse_dt: splash_mem_addr=92001000 splash_mem_size=13ff000
  695. [ 3.665883] mdss_mdp_epdc_splash_sync_to_epdc_wb: epdc_splash virt_addr[0xffffff8001f00000].
  696. [ 3.676191] mdss_mdp_epdc_splash_sync_to_epdc_wb: malloc splash_mem_addr_virt[ffffff8003300000].
  697. [ 3.693404] mdss_mdp_epdc_thread: mdss_mdp_epdc_thread(): wait ...
  698. [ 3.693528] mdss_fb_probe: fb1: split_mode:0 left:0 right:0
  699. [ 3.704116] mdss_fb_register: FrameBuffer[1] 640x640 registered successfully!
  700. [ 3.711315] mdss_mdp_splash_parse_dt: splash mem child node is not present
  701. [ 3.721131] IPC_RTR: msm_ipc_router_smd_driver_register Already driver registered IPCRTR
  702. [ 3.728210] IPC_RTR: msm_ipc_router_smd_driver_register Already driver registered IPCRTR
  703. [ 3.739873] In memshare_probe, Memshare probe success
  704. [ 3.745637] msm_rpm_log_probe: OK
  705. [ 3.749053] subsys-pil-tz soc:qcom,kgsl-hyp: for a506_zap segments only will be dumped.
  706. [ 3.757784] subsys-pil-tz 1de0000.qcom,venus: for venus segments only will be dumped.
  707. [ 3.766762] msm_serial_hs module loaded
  708. [ 3.769768] msm_serial_hsl_probe: detected port #0 (ttyHSL0)
  709. [ 3.775275] AXI: get_pdata(): Error: Client name not found
  710. [ 3.780678] AXI: msm_bus_cl_get_pdata(): client has to provide missing entry for successful registration
  711. [ 3.790137] msm_serial_hsl_probe: Bus scaling is disabled
  712. [ 3.795593] 78af000.serial: ttyHSL0 at MMIO 0x78af000 (irq = 173, base_baud = 460800y+HH▒▒3.804155] msm_hsl_console_setup: console setup on port #0
  713. [ 3.808715] console [ttyHSL0] enabled
  714. [ 3.808715] console [ttyHSL0] enabled
  715. [ 3.815971] bootconsole [uart0] disabled
  716. [ 3.815971] bootconsole [uart0] disabled
  717. [ 3.824071] msm_serial_hsl_init: driver initialized
  718. [ 3.838479] platform 1c40000.qcom,kgsl-iommu:gfx3d_secure: assigned reserved memory node secure_region@0
  719. [ 3.853894] brd: module loaded
  720. [ 3.857547] loop: module loaded
  721. [ 3.859916] zram: Created 1 device(s) ...
  722. [ 3.864063] QSEECOM: qseecom_probe: qseecom.qsee_version = 0x1001000
  723. [ 3.870014] QSEECOM: qseecom_retrieve_ce_data: Device does not support PFE
  724. [ 3.876660] QSEECOM: qseecom_probe: qseecom clocks handled by other subsystem
  725. [ 3.883960] QSEECOM: qseecom_probe: qsee reentrancy support phase is not defined, setting to default 0
  726. [ 3.893783] QSEECOM: qseecom_probe: qseecom.whitelist_support = 1
  727. [ 3.900986] i2c-core: driver [tabla-i2c-core] using legacy suspend method
  728. [ 3.906725] i2c-core: driver [tabla-i2c-core] using legacy resume method
  729. [ 3.913493] i2c-core: driver [wcd9xxx-i2c-core] using legacy suspend method
  730. [ 3.920366] i2c-core: driver [wcd9xxx-i2c-core] using legacy resume method
  731. [ 3.927279] i2c-core: driver [tasha-i2c-core] using legacy suspend method
  732. [ 3.933996] i2c-core: driver [tasha-i2c-core] using legacy resume method
  733. [ 3.941505] QCE50: __qce_get_device_tree_data: BAM Apps EE is not defined, setting to default 1
  734. [ 3.949869] qce 720000.qcedev: Qualcomm Crypto 5.3.3 device found @0x720000
  735. [ 3.956296] qce 720000.qcedev: CE device = 0x0
  736. [ 3.956296] IO base, CE = 0xffffff8001b40000
  737. [ 3.956296] Consumer (IN) PIPE 2, Producer (OUT) PIPE 3
  738. [ 3.956296] IO base BAM = 0x0000000000000000
  739. [ 3.956296] BAM IRQ 196
  740. [ 3.956296] Engines Availability = 0x2010853
  741. [ 3.981688] sps:BAM 0x0000000000704000 is registered.
  742. [ 3.986401] sps:BAM 0x0000000000704000 (va:0xffffff8001ec0000) enabled: ver:0x27, number of pipes:8
  743. [ 3.995651] QCE50: qce_sps_init: Qualcomm MSM CE-BAM at 0x0000000000704000 irq 196
  744. [ 4.005680] QCE50: __qce_get_device_tree_data: BAM Apps EE is not defined, setting to default 1
  745. [ 4.014112] qcrypto 720000.qcrypto: Qualcomm Crypto 5.3.3 device found @0x720000
  746. [ 4.020725] qcrypto 720000.qcrypto: CE device = 0x0
  747. [ 4.020725] IO base, CE = 0xffffff8004780000
  748. [ 4.020725] Consumer (IN) PIPE 4, Producer (OUT) PIPE 5
  749. [ 4.020725] IO base BAM = 0x0000000000000000
  750. [ 4.020725] BAM IRQ 196
  751. [ 4.020725] Engines Availability = 0x2010853
  752. [ 4.046492] QCE50: qce_sps_init: Qualcomm MSM CE-BAM at 0x0000000000704000 irq 196
  753. [ 4.055831] qcrypto 720000.qcrypto: qcrypto-ecb-aes
  754. [ 4.059752] qcrypto 720000.qcrypto: qcrypto-cbc-aes
  755. [ 4.064597] qcrypto 720000.qcrypto: qcrypto-ctr-aes
  756. [ 4.069472] qcrypto 720000.qcrypto: qcrypto-ecb-des
  757. [ 4.074321] qcrypto 720000.qcrypto: qcrypto-cbc-des
  758. [ 4.079192] qcrypto 720000.qcrypto: qcrypto-ecb-3des
  759. [ 4.084132] qcrypto 720000.qcrypto: qcrypto-cbc-3des
  760. [ 4.089091] qcrypto 720000.qcrypto: qcrypto-xts-aes
  761. [ 4.093938] qcrypto 720000.qcrypto: qcrypto-sha1
  762. [ 4.098552] qcrypto 720000.qcrypto: qcrypto-sha256
  763. [ 4.103312] qcrypto 720000.qcrypto: qcrypto-aead-hmac-sha1-cbc-aes
  764. [ 4.109491] qcrypto 720000.qcrypto: qcrypto-aead-hmac-sha1-cbc-des
  765. [ 4.115639] qcrypto 720000.qcrypto: qcrypto-aead-hmac-sha1-cbc-3des
  766. [ 4.121903] qcrypto 720000.qcrypto: qcrypto-aead-hmac-sha256-cbc-aes
  767. [ 4.128239] qcrypto 720000.qcrypto: qcrypto-aead-hmac-sha256-cbc-des
  768. [ 4.134563] qcrypto 720000.qcrypto: qcrypto-aead-hmac-sha256-cbc-3des
  769. [ 4.140998] qcrypto 720000.qcrypto: qcrypto-hmac-sha1
  770. [ 4.146021] qcrypto 720000.qcrypto: qcrypto-hmac-sha256
  771. [ 4.151243] qcrypto 720000.qcrypto: qcrypto-aes-ccm
  772. [ 4.156090] qcrypto 720000.qcrypto: qcrypto-rfc4309-aes-ccm
  773. [ 4.162516] qcom_ice_get_device_tree_data: No vdd-hba-supply regulator, assuming not needed
  774. [ 4.170044] ICE IRQ = 197
  775. [ 4.173350] SCSI Media Changer driver v0.25
  776. [ 4.177704] spi_flash_init(555): spi_flash_init
  777. [ 4.181469] tun: Universal TUN/TAP device driver, 1.6
  778. [ 4.186310] tun: (C) 1999-2004 Max Krasnyansky <[email protected]>
  779. [ 4.192542] PPP generic driver version 2.4.2
  780. [ 4.196802] PPP BSD Compression module registered
  781. [ 4.201432] PPP Deflate Compression module registered
  782. [ 4.206461] PPP MPPE Compression module registered
  783. [ 4.211243] NET: Registered protocol family 24
  784. [ 4.216202] wcnss_wlan probed in built-in mode
  785. [ 4.220717] usbcore: registered new interface driver asix
  786. [ 4.225521] usbcore: registered new interface driver ax88179_178a
  787. [ 4.231580] usbcore: registered new interface driver cdc_ether
  788. [ 4.237382] usbcore: registered new interface driver net1080
  789. [ 4.243041] usbcore: registered new interface driver cdc_subset
  790. [ 4.248938] usbcore: registered new interface driver zaurus
  791. [ 4.254585] usbcore: registered new interface driver cdc_ncm
  792. [ 4.260586] msm_sharedmem: sharedmem_register_qmi: qmi init successful
  793. [ 4.260976] scm_call failed: func id 0x42000c16, ret: -1, syscall returns: 0x0, 0x0, 0x0
  794. [ 4.260978] hyp_assign_table: Failed to assign memory protection, ret = -5
  795. [ 4.260983] msm_sharedmem: setup_shared_ram_perms: hyp_assign_phys failed IPA=0x0160x00000000f2d00000 size=1572864 err=-5
  796. [ 4.261067] msm_sharedmem: msm_sharedmem_probe: Device created for client 'rmtfs'
  797. [ 4.266700] msm-dwc3 7000000.ssusb: unable to get dbm device
  798. [ 4.268070] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  799. [ 4.268339] ehci-pci: EHCI PCI platform driver
  800. [ 4.268374] ehci-msm: Qualcomm On-Chip EHCI Host Controller
  801. [ 4.268677] usbcore: registered new interface driver cdc_acm
  802. [ 4.268679] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
  803. [ 4.268720] usbcore: registered new interface driver usb-storage
  804. [ 4.268745] usbcore: registered new interface driver ums-alauda
  805. [ 4.268770] usbcore: registered new interface driver ums-cypress
  806. [ 4.268796] usbcore: registered new interface driver ums-datafab
  807. [ 4.268822] usbcore: registered new interface driver ums-freecom
  808. [ 4.268847] usbcore: registered new interface driver ums-isd200
  809. [ 4.268874] usbcore: registered new interface driver ums-jumpshot
  810. [ 4.268899] usbcore: registered new interface driver ums-karma
  811. [ 4.268924] usbcore: registered new interface driver ums-sddr09
  812. [ 4.268951] usbcore: registered new interface driver ums-sddr55
  813. [ 4.268976] usbcore: registered new interface driver ums-usbat
  814. [ 4.269055] usbcore: registered new interface driver usbserial
  815. [ 4.269086] usbcore: registered new interface driver usb_ehset_test
  816. [ 4.269567] onyx_mtp_buf_alloc: onyx_mtp_buf_alloc: onyx mtp buf alloc success!
  817. [ 4.269821] gbridge_init: gbridge_init successs.
  818. [ 4.270140] mousedev: PS/2 mouse device common for all mice
  819. [ 4.270303] usbcore: registered new interface driver xpad
  820. [ 4.270786] cyttsp4_core_init: Cypress TTSP v4 core driver (Built 20130612) rc=0
  821. [ 4.270816] cyttsp4_i2c_init: Cypress TTSP I2C Touchscreen Driver (Built 20130612) rc=0
  822. [ 4.270840] cyttsp4_mt_init: Cypress TTSP MT v4 multi-touch (Built 20130612), rc=0
  823. [ 4.270846] cyttsp4_device_access_init: Registering device access device for core_id: main_ttsp_core
  824. [ 4.270870] cyttsp4_device_access_init: Cypress TTSP Device Access (Built 20130612) rc=0
  825. [ 4.270876] cyttsp4_loader_init: Registering loader device for core_id: main_ttsp_core
  826. [ 4.270898] cyttsp4_loader_init: Cypress TTSP FW loader (Built 20130612) rc=0
  827. [ 4.270929] i2c-core: driver [fts_ts] using legacy suspend method
  828. [ 4.270930] i2c-core: driver [fts_ts] using legacy resume method
  829. [ 4.271088] 3-0024 supply vdd not found, using dummy regulator
  830. [ 4.271159] unable to set vdd to 1.8V
  831. [ 4.321199] cyttsp5_i2c_adapter 3-0024: cyttsp5_init: INIT CYTTSP PWR gpio=116(1) 1v8_gpio=117(1) RST gpio=64 and IRQ gpio=65 r=0
  832. [ 4.321202] cyttsp5_i2c_adapter 3-0024: cyttsp5_probe: Detect HW
  833. [ 4.398014] cyttsp5_i2c_adapter 3-0024: cyttsp5_xres: RESET CYTTSP gpio=64 r=0
  834. [ 4.508255] i2c-msm-v2 78b7000.i2c: msm_bus_scale_register_client(mstr-id:86):0x10 (ok)
  835. [ 5.337193] cyttsp5_i2c_adapter 3-0024: cyttsp5_startup_: Bootloader mode
  836. [ 5.347661] cyttsp5_i2c_adapter 3-0024: cyttsp5_hid_output_validate_bl_response: HID output response, ERROR:5
  837. [ 5.365700] cyttsp5_i2c_adapter 3-0024: cyttsp5_startup_: Operational mode
  838. [ 5.371541] cyttsp5_i2c_adapter 3-0024: cyttsp5_startup_: Reading report descriptor
  839. [ 5.379920] sps: BAM device 0x0000000007884000 is not registered yet.
  840. [ 5.385888] sps:BAM 0x0000000007884000 is registered.
  841. [ 5.390592] sps:BAM 0x0000000007884000 (va:0xffffff8001c60000) enabled: ver:0x19, number of pipes:12
  842. [ 6.223877] cyttsp5_i2c_adapter 3-0024: cyttsp5 Protocol Version: 1.2
  843. [ 6.233521] cyttsp5_startup_: Panel ID: 0xFF
  844. [ 6.242552] input: cyttsp5_mt as /devices/soc/78b7000.i2c/i2c-3/3-0024/input/input1
  845. [ 6.249267] cyttsp5_i2c_init: Parade TTSP I2C Driver (Built TTDA.03.08.874312) rc=0
  846. [ 6.256817] Update TTConfig for note2
  847. [ 6.260484] cyttsp5_i2c_adapter 3-0024: cyttsp5_get_platform_ttconfig: Panel ID not enabled, using legacy ttconfig
  848. [ 6.270794] cyttsp5_check_firmware_version: Image is the same, will NOT upgrade
  849. [ 6.278084] cyttsp5_i2c_adapter 3-0024: cyttsp5_loader_probe: Successful probe 3-0024
  850. [ 6.285881] cyttsp5_loader_init: Parade TTSP FW Loader Driver (Built TTDA.03.08.874312) rc=0
  851. [ 6.294541] cyttsp5_device_access_init: Parade TTSP Device Access Driver (Built TTDA.03.08.874312) rc=0
  852. [ 6.303814] wacom_ts 5-0009: no update_gpio pin available
  853. [ 6.309093] wacom_ts 5-0009: no pen_detect_gpio pin available
  854. [ 6.314816] 5-0009 supply vdd not found, using dummy regulator
  855. [ 6.320680] wacom_i2c_probe(): reset_gpio=63, intr_gpio=59, pen_detect_gpio=-2, irq=66 flag=0
  856. [ 6.329130] wacom_i2c_power_ctl: power 3v3 enable
  857. [ 6.333798] wacom_i2c_power_ctl: power 1v8 enable
  858. [ 6.458699] i2c-msm-v2 7af5000.i2c: msm_bus_scale_register_client(mstr-id:84):0x11 (ok)
  859. [ 6.466201] wacom_query_device-L_407 return 1
  860. [ 6.470347] wacom_query_device-L_407 return 2
  861. [ 6.476218] wacom_query_device-L_407 return 3
  862. [ 6.482759] input report length 17
  863. [ 6.485201] x_max:20967, y_max:15725, pressure:4095, fw:3
  864. [ 6.490595] height:255, tilt_x:40, tilt_y:35
  865. [ 6.494837] wacom_i2c_probe feature_xmax: 20967 feature_ymax: 15725
  866. [ 6.501312] input: onyx_emp_Wacom I2C Digitizer as /devices/soc/7af5000.i2c/i2c-5/5-0009/input/input2
  867. [ 6.510595] wacom_i2c_probe(): OK!
  868. [ 6.513783] EMRight I2C Pen Driver (Built)
  869. [ 6.517871] [EMRight]-emright_i2c_init: Pen i2c driver add Success
  870. [ 6.525794] i2c-core: driver [smi130_acc] using legacy suspend method
  871. [ 6.531199] i2c-core: driver [smi130_acc] using legacy resume method
  872. [ 6.537553] i2c-core: driver [smi130_gyro] using legacy suspend method
  873. [ 6.544049] i2c-core: driver [smi130_gyro] using legacy resume method
  874. [ 6.608112] input: sf-keys as /devices/virtual/input/input3
  875. [ 6.612745] sf_ctl_init_irq(..) enter ##############.
  876. [ 6.618034] qcom,qpnp-rtc qpnp-rtc-8: rtc core: registered qpnp_rtc as rtc0
  877. [ 6.624718] i2c /dev entries driver
  878. [ 6.635699] msm_camera_get_dt_vreg_data:1201 number of entries is 0 or not present in dts
  879. [ 6.643396] msm_camera_get_dt_vreg_data:1201 number of entries is 0 or not present in dts
  880. [ 6.651658] msm_camera_get_dt_vreg_data:1201 number of entries is 0 or not present in dts
  881. [ 6.659766] msm_camera_get_dt_vreg_data:1201 number of entries is 0 or not present in dts
  882. [ 6.669152] msm_camera_get_dt_vreg_data:1201 number of entries is 0 or not present in dts
  883. [ 6.677397] msm_camera_get_dt_vreg_data:1201 number of entries is 0 or not present in dts
  884. [ 6.685653] msm_camera_get_dt_vreg_data:1201 number of entries is 0 or not present in dts
  885. [ 6.694248] msm_flash_get_dt_data:1035 No valid flash GPIOs data
  886. [ 6.699975] adp1660 i2c_add_driver success
  887. [ 6.707793] MSM-CPP cpp_init_hardware:1011 CPP HW Version: 0x40030003
  888. [ 6.713377] MSM-CPP cpp_init_hardware:1029 stream_cnt:0
  889. [ 6.720058] CAM-SOC msm_camera_get_reg_base:787 err: mem resource vfe_fuse not found
  890. [ 6.726754] CAM-SOC msm_camera_get_res_size:830 err: mem resource vfe_fuse not found
  891. [ 6.735784] CAM-SOC msm_camera_get_reg_base:787 err: mem resource vfe_fuse not found
  892. [ 6.742492] CAM-SOC msm_camera_get_res_size:830 err: mem resource vfe_fuse not found
  893. [ 6.757716] __msm_jpeg_init:1537] Jpeg Device id 0
  894. [ 6.763742] FG: fg_check_ima_exception: Initial ima_err_sts=0 ima_exp_sts=0 ima_hw_sts=aa
  895. [ 6.772797] FG: fg_probe: FG Probe success - FG Revision DIG:3.1 ANA:1.2 PMIC subtype=17
  896. [ 6.780126] update_cutoff_voltage: update cutoff voltage to: 3300mV[ 6.780605] TYPEC: set_property_on_battery: no batt psy found
  897. [ 6.780608] TYPEC: ufp_detect_handler: failed to set TYPEC MODE on battery psy rc=-19
  898. [ 6.781503] TYPEC: qpnp_typec_probe: TypeC successfully probed state=18 CC-line-state=1
  899. [ 6.782975] thermal thermal_zone1: failed to read out thermal zone 1
  900. [ 6.783131] thermal thermal_zone2: failed to read out thermal zone 2
  901. [ 6.783287] thermal thermal_zone3: failed to read out thermal zone 3
  902. [ 6.783681] qpnp_vadc_read: no vadc_chg_vote found
  903. [ 6.783683] qpnp_vadc_get_temp: VADC read error with -22
  904. [ 6.783686] thermal thermal_zone4: failed to read out thermal zone 4
  905. [ 6.784268] VCOM: Failed to create debugfs directory
  906. [ 6.784279] DISPLAY: Failed to create debugfs directory
  907. [ 6.804892] device-mapper: uevent: version 1.0.3
  908. [ 6.805037] device-mapper: ioctl: 4.28.0-ioctl (2014-09-17) initialised: [email protected]
  909. [ 6.805123] device-mapper: req-crypt: dm-req-crypt successfully initalized.
  910. [ 6.805123]
  911. [ 6.805931] sdhci: Secure Digital Host Controller Interface driver
  912. [ 6.805932] sdhci: Copyright(c) Pierre Ossman
  913. [ 6.805937] sdhci-pltfm: SDHCI platform and OF driver helper
  914. [ 6.806288] hidraw: raw HID events driver (C) Jiri Kosina
  915. [ 6.806622] usbcore: registered new interface driver usbhid
  916. [ 6.806623] usbhid: USB HID core driver
  917. [ 6.806628] i2c_hid_driver_init skip init
  918. [ 6.806641] qcom_ice_get_pdevice: found ice device ffffffc0d8f01c00
  919. [ 6.806643] qcom_ice_get_pdevice: matching platform device ffffffc0dc293000
  920. [ 6.806921] sdhci_msm 7824900.sdhci: hotplug_in_freeze: 0
  921. [ 6.807748] ashmem: initialized
  922. [ 6.810776] qcom_ice 7803000.sdcc1ice: QC ICE 2.1.44 device found @0xffffff8001b20000
  923. [ 6.813931] sdhci_msm 7824900.sdhci: No vmmc regulator found
  924. [ 6.813934] sdhci_msm 7824900.sdhci: No vqmmc regulator found
  925. [ 6.814261] mmc0: SDHCI controller on 7824900.sdhci [7824900.sdhci] using 64-bit ADMA in CMDQ mode
  926. [ 6.842951] tz_log 8600720.tz-log: Hyp log service is not supported
  927. [ 6.843600] qpnp_coincell_charger_show_state: enabled=Y, voltage=3200 mV, resistance=2100 ohm
  928. [ 6.852025] bimc-bwmon 408000.qcom,cpu-bwmon: BW HWmon governor registered.
  929. [ 6.855714] devfreq soc:qcom,cpubw: Couldn't update frequency transition information.
  930. [ 6.855852] devfreq soc:qcom,mincpubw: Couldn't update frequency transition information.
  931. [ 6.857341] coresight-csr 6001000.csr: CSR initialized
  932. [ 6.857799] coresight-tmc 6028000.tmc: Byte Counter feature enabled
  933. [ 6.858103] sps:BAM 0x0000000006044000 is registered.[ 6.858257] coresight-tmc 6028000.tmc: TMC initialized
  934. [ 6.858494] coresight-tmc 6027000.tmc: TMC initialized
  935. [ 6.859916] coresight-replicator 6026000.replicator: REPLICATOR initialized
  936. [ 6.860359] coresight-stm 6002000.stm: STM initialized
  937. [ 6.860726] sensors-ssc soc:qcom,msm-ssc-sensors: msm_ssc_sensors_dt_parse: get qdsp timer cntpct hi offset fail
  938. [ 6.860729] sensors-ssc soc:qcom,msm-ssc-sensors: slpi_loader_init_sysfs: Could not parse dt
  939. [ 6.861137] msm8953_board_info_init: chip_serial: 0x52c4103, board_info_format: 0xa[ 6.861547] onyx-hall soc:onyx_hall: hall enable alt key: 1
  940. [ 6.862338] onyx_hall_power_init: power_gpio not found, maybe not set!
  941. [ 6.862555] input: onyx-hall as /devices/soc/soc:onyx_hall/input/input4
  942. [ 6.862929] usbcore: registered new interface driver snd-usb-audio
  943. [ 6.876799] msm-pcm-lpa soc:qcom,msm-pcm-lpa: msm_pcm_probe: dev name soc:qcom,msm-pcm-lpa
  944. [ 6.879460] mmc0: Out-of-interrupt timeout is 100[ms]
  945. [ 6.879462] mmc0: BKOPS_EN equals 0x2
  946. [ 6.879464] mmc0: eMMC FW version: 0x05
  947. [ 6.879466] mmc0: CMDQ supported: depth: 16
  948. [ 6.879467] mmc0: cache barrier support 0 flush policy 0
  949. [ 6.881384] u32 classifier
  950. [ 6.881385] Actions configured
  951. [ 6.881416] Netfilter messages via NETLINK v0.30.
  952. [ 6.881459] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
  953. [ 6.881729] ctnetlink v0.93: registering with nfnetlink.
  954. [ 6.882247] xt_time: kernel timezone is -0000
  955. [ 6.882314] IPv4 over IPsec tunneling driver
  956. [ 6.882730] ip_tables: (C) 2000-2006 Netfilter Core Team
  957. [ 6.882866] arp_tables: (C) 2002 David S. Miller
  958. [ 6.882906] TCP: cubic registered
  959. [ 6.882910] Initializing XFRM netlink socket
  960. [ 6.883176] NET: Registered protocol family 10
  961. [ 6.883936] mip6: Mobile IPv6
  962. [ 6.883955] ip6_tables: (C) 2000-2006 Netfilter Core Team
  963. [ 6.884392] sit: IPv6 over IPv4 tunneling driver
  964. [ 6.884993] NET: Registered protocol family 17
  965. [ 6.885012] NET: Registered protocol family 15
  966. [ 6.885041] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this.
  967. [ 6.885048] Ebtables v2.0 registered
  968. [ 6.885177] Bluetooth: ffffffc0dd063cc8Bluetooth: ffffffc0dd063cb8Bluetooth: ffffffc0dd063cf8Bluetooth: ffffffc0dd063cd8Bluetooth: ffffffc0dd063cd8Bluetooth: ffffffc0dd063cb8Bluetooth: ffffffc0dd063d28Bluetooth: ffffffc0dd063d08[ 6.885268] l2tp_core: L2TP core driver, V2.0
  969. [ 6.885280] l2tp_ppp: PPPoL2TP kernel driver, V2.0
  970. [ 6.885285] l2tp_ip: L2TP IP encapsulation support (L2TPv3)
  971. [ 6.885297] l2tp_netlink: L2TP netlink interface
  972. [ 6.885319] l2tp_eth: L2TP ethernet pseudowire support (L2TPv3)
  973. [ 6.885340] l2tp_debugfs: L2TP debugfs support
  974. [ 6.885345] l2tp_ip6: L2TP IP encapsulation support for IPv6 (L2TPv3)
  975. [ 6.886058] NET: Registered protocol family 27
  976. [ 6.890040] cmdq_host_alloc_tdl: desc_size: 768 data_sz: 253952 slot-sz: 24
  977. [ 6.890327] mmc0: CMDQ enabled on card
  978. [ 6.890335] mmc0: new HS400 MMC card at address 0001
  979. [ 6.890652] sdhci_msm_pm_qos_cpu_init (): voted for group #0 (mask=0xf) latency=2
  980. [ 6.890657] sdhci_msm_pm_qos_cpu_init (): voted for group #1 (mask=0xf0) latency=2
  981. [ 6.890725] mmcblk0: mmc0:0001 RH64AB 58.2 GiB
  982. [ 6.890812] mmcblk0rpmb: mmc0:0001 RH64AB partition 3 4.00 MiB
  983. [ 6.890955] subsys-pil-tz a21b000.qcom,pronto: for wcnss segments only will be dumped.
  984. [ 6.892551] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18 p19 p20 p21 p22 p23 p24 p25 p26 p27 p28 p29 p30 p31 p32 p33 p34 p35 p36 p37 p38 p39 p40 p41 p42 p43 p44 p45 p46 p47 p48 p49 p50 p51
  985. [ 6.897504] sps:BAM 0x0000000007104000 is registered.[ 6.900952] qpnp-smbcharger qpnp-smbcharger-16: node /soc/qcom,spmi@200f000/qcom,pmi8950@2/qcom,qpnp-smbcharger IO resource absent!
  986. [ 6.901107] smbcharger_charger_otg: no parameters
  987. [ 6.901289] SMBCHG: smbchg_hvdcp_enable_cb: smbchg_hvdcp_enable_cb enable 1
  988. [ 6.904320] handle_usb_insertion: inserted type = 4 (SDP)
  989. [ 6.907901] qpnp-smbcharger qpnp-smbcharger-16: node /soc/qcom,spmi@200f000/qcom,pmi8950@2/qcom,qpnp-smbcharger IO resource absent!
  990. [ 6.908935] qpnp-smbcharger qpnp-smbcharger-16: SMBCHG successfully probe Charger version=SCHG_LITE Revision DIG:0.0 ANA:0.1 batt=1 dc=0 usb=1
  991. [ 6.910346] EDAC DEVICE0: Giving out device to module soc:arm64-cpu-erp controller cache: DEV soc:arm64-cpu-erp (INTERRUPT)
  992. [ 6.910724] ARM64 CPU ERP: Could not find <cci-irq> IRQ property. Proceeding anyway.
  993. [ 6.910726] ARM64 CPU ERP: SBE detection is disabled.
  994. [ 6.915611] Registered cp15_barrier emulation handler
  995. [ 6.922551] Registered setend emulation handler
  996. [ 6.922861] Loading compiled-in X.509 certificates
  997. [ 6.923392] Loaded X.509 cert 'Android: 7e4333f9bba00adfe0ede979e28ed1920492b40f'
  998. [ 6.924907] Loaded X.509 cert 'Magrathea: Glacier signing key: ba11c6c06f2f47e73d4bfee20eebcdee052c0a10'
  999. [ 6.924930] registered taskstats version 1
  1000. [ 6.925489] onyx_epdc_fb_init(): enter!
  1001. [ 6.925490] ONYX_SEPDC_VERSION version: 798b484+2019-11-23 17:56:23
  1002. [ 6.926031] onyx_epdc_fb_probe(): Probing onyx epdc fb ......
  1003. [ 6.926038] onyx_epdc_fb_probe(): framebuffer allocated
  1004. [ 6.926040] onyx_epdc_fb_probe(): upd_scheme[2] src_pixel_format[0]!
  1005. [ 6.926043] onyx_epdc_parse_dt(): pwrdown_delay[500]
  1006. [ 6.926049] onyx_epdc_parse_dt(): power_fail_dont_update[N] cfa_mode[0] cut_frame_num[0] cut_frame_fill_zero_enable[N] sf_rotation[270] power_timeout_deteck[N].
  1007. [ 6.926051] onyx_epdc_parse_dt(): temp_deteck_enable[N] temp_deteck_from_pmic[N] temp_diff[0].
  1008. [ 6.927473] onyx_epdc_fb_probe(): kmalloc buf_gray_fb_dma[0] = 0xffffffc0d5400000, buf_gray_fb_dma[ext] = 0xffffffc0d5800000!
  1009. [ 6.927510] onyx_epdc_fb_probe(): kmalloc buf_gray_fb_dma[1] = 0xffffffc0d5000000, buf_gray_fb_dma[ext] = 0xffffffc0d5800000!
  1010. [ 6.927548] onyx_epdc_fb_probe(): kmalloc buf_gray_fb_dma[2] = 0xffffffc0d4c00000, buf_gray_fb_dma[ext] = 0xffffffc0d5800000!
  1011. [ 6.927587] onyx_epdc_fb_probe(): kmalloc buf_gray_fb_dma[3] = 0xffffffc0d4800000, buf_gray_fb_dma[ext] = 0xffffffc0d5800000!
  1012. [ 6.928463] onyx_epdc_fb_probe(): allocated 16bit buf_index[ffffff8005908000] size[5259264], 8bit working_buffer[ffffff8005e0d000] size[2629632]!
  1013. [ 6.928984] onyx_epdc_fb_probe(): videomemory allocated ok!
  1014. [ 6.929387] onyx_epdc_fb_probe(): videomemory=0xFFFFFF8005685000h, screen_base=0xFFFFFF8005685000h, screen_size=0x281AC0h, dpyw=1872, dpyh=1404, pixel bits=8 bits
  1015. [ 6.929390] onyx_epdc_fb_probe(): videomemorysize=282000, info->fix.smem_len=282000
  1016. [ 6.930704] msm-dwc3 7000000.ssusb: Avail curr from USB = 500
  1017. [ 6.943398] onyx_hall_irq: val: 1
  1018. [ 6.975786] initSgs(): struct Sg size[6], sgTable size[15400 KB].
  1019. [ 6.975958] onyx_epdc_mempool_cteate(): mempool[upd] malloc EpdcMem esize[136] num[64] num_max[-1] real[64]!
  1020. [ 6.976291] onyx_epdc_mempool_cteate(): mempool[lut] malloc EpdcMem esize[1168] num[128] num_max[-1] real[128]!
  1021. [ 6.976335] onyx_epdc_mempool_cteate(): mempool[msg] malloc EpdcMem esize[24] num[16] num_max[-1] real[16]!
  1022. [ 6.976338] onyx_epdc_LCDIF_init(): tcon_id[0]!
  1023. [ 6.976340] msm8953_lcdc_set_isr_callback(): set isr_callback!!
  1024. [ 6.976377] onyx_epdc_LCDIF_init(): kmalloc waveform buf_eink[0] virt addr = 0xffffffc0d0800000[phy:0x00000000e0800000] size = 1855488.
  1025. [ 6.976408] onyx_epdc_LCDIF_init(): kmalloc waveform buf_eink[1] virt addr = 0xffffffc0d0a00000[phy:0x00000000e0a00000] size = 1855488.
  1026. [ 6.976436] onyx_epdc_LCDIF_init(): kmalloc waveform buf_eink[2] virt addr = 0xffffffc0d0400000[phy:0x00000000e0400000] size = 1855488.
  1027. [ 6.976468] onyx_epdc_LCDIF_init(): kmalloc waveform buf_eink[3] virt addr = 0xffffffc0d0600000[phy:0x00000000e0600000] size = 1855488.
  1028. [ 6.981815] onyx_epdc_LCDIF_init(): virt_buf_handwrite = 0xffffff800b609000, phy_buf_handwrite = 0x0!
  1029. [ 6.981818] onyx_epdc_power_init(): enter.
  1030. [ 6.981839] DISPLAY: Failed to create debugfs directory
  1031. [ 6.981849] VCOM: Failed to create debugfs directory
  1032. [ 6.981858] V3P3: Failed to create debugfs directory
  1033. [ 6.981867] TMST: Failed to create debugfs directory
  1034. [ 6.981870] o_e_i(): panel index:0!
  1035. [ 6.981872] ebc_set_timing_buf_16bits(): 325 x 1423 x 4 = 1849900,
  1036. [ 6.981876] ebc_set_timing_buf_16bits(): 0xffffffc0d0800004 - 0xffffffc0d0800000 = 1, LINE_TIME=325, GDCLK_LOW=40 GDCLK_HIGH=285 GDCLK_LOW_REST=0
  1037. [ 6.982599] GDCLK: 0xffffffc0d09c3a2c - 0xffffffc0d0800000 = 462475
  1038. [ 6.984301] GDSP: 0xffffffc0d09c3a2c - 0xffffffc0d0800000 = 462475
  1039. [ 6.986022] GDOE: 0xffffffc0d09c3a2c - 0xffffffc0d0800000 = 462475
  1040. [ 6.987678] SDOE: 0xffffffc0d09c3a2c - 0xffffffc0d0800000 = 462475
  1041. [ 6.987913] SDLE: 0xffffffc0d09c3a2c - 0xffffffc0d0800000 = 462475
  1042. [ 6.988940] SDSP: 0xffffffc0d09c3a2c - 0xffffffc0d0800000 = 462475
  1043. [ 6.990377] ebc_check_timing_buf_16bits(): enter! -- test 0x100000
  1044. [ 6.993865] ebc_check_timing_buf_16bits(): [0] pos = 325, num = 457600!
  1045. [ 6.995528] onyx_epdc_fb_probe(): fb-1: onyx_epdc frame buffer, using 2568K of video memory
  1046. [ 6.995960] ebc_buf_init(): virt = 0xffffffc0cf000000, phy = 0x00000000df000000!
  1047. [ 6.995962] ebc_buf_init(): virt = 0xffffffc0cf140d60, phy = 0x00000000df140d60!
  1048. [ 6.995963] ebc_buf_init(): init OK! ebc_buf num = 2!
  1049. [ 6.996821] e_w_b_i(): queue 4 free waveform_desc.
  1050. [ 6.996885] onyx_epdc_fb_probe(): sched_setscheduler_nocheck() return 0!
  1051. [ 6.996889] epdc_refresh_waveform_task(): begin!
  1052. [ 6.996941] e_task_n(): begin!
  1053. [ 6.996998] e_m_t(): begin!
  1054. [ 6.998635] onyx_epdc_fb_probe(): handwrite memory allocated ok!virt_buf_handwrite = 0xffffff800b609000, phy_buf_handwrite = 0x0!
  1055. [ 7.001881] onyx_epdc_fb_probe(): OK!.
  1056. [ 7.002173] onyx_epdc_fb_init(): registered driver end!
  1057. [ 7.004058] fastrpc soc:qcom,adsprpc-mem: for adsp_rh segments only will be dumped.
  1058. [ 7.006658] RNDIS_IPA module is loaded.[ 7.007881] file system registered
  1059. [ 7.007927] mbim_init: initialize 1 instances
  1060. [ 7.007974] mbim_init: Initialized 1 ports
  1061. [ 7.009183] rndis_qc_init: initialize rndis QC instance
  1062. [ 7.009361] Number of LUNs=8
  1063. [ 7.009365] Mass Storage Function, version: 2009/09/11
  1064. [ 7.009369] LUN: removable file: (no medium)
  1065. [ 7.009379] Number of LUNs=1
  1066. [ 7.009418] LUN: removable file: (no medium)
  1067. [ 7.009419] Number of LUNs=1
  1068. [ 7.009626] android_usb gadget: android_usb ready
  1069. [ 7.013009] qcom,qpnp-rtc qpnp-rtc-8: setting system clock to 1970-01-01 02:01:22 UTC (7282)
  1070. [ 7.016072] msm-core initialized without polling period
  1071. [ 7.019277] parse_cpu_levels: idx 1 276
  1072. [ 7.019282] calculate_residency: residency < 0 for LPM
  1073. [ 7.019422] parse_cpu_levels: idx 1 286
  1074. [ 7.019426] calculate_residency: residency < 0 for LPM
  1075. [ 7.027747] qcom,qpnp-flash-led qpnp-flash-led-20: Unable to acquire pinctrl
  1076. [ 7.029701] rmnet_ipa started initialization
  1077. [ 7.029705] IPA SSR support = True
  1078. [ 7.029706] IPA ipa-loaduC = True
  1079. [ 7.029708] IPA SG support = True
  1080. [ 7.032429] ipa ipa_sps_irq_control_all:945 EP (5) not allocated.
  1081. [ 7.032434] ipa ipa2_uc_state_check:301 uC is not loaded
  1082. [ 7.033440] rmnet_ipa completed initialization
  1083. [ 7.039372] qcom,cc-debug-8953 1874000.qcom,cc-debug: Registered Debug Mux successfully
  1084. [ 7.041187] msm8952-slimbus-wcd c051000.sound-9335: MUX addr invalid for QUIN PCM
  1085. [ 7.041191] msm8952-slimbus-wcd c051000.sound-9335: MUX addr invalid for EXT CLK CTL
  1086. [ 7.041194] msm8952-slimbus-wcd c051000.sound-9335: MUX addr invalid for SEC TLMM CTL
  1087. [ 7.041199] msm8952-slimbus-wcd c051000.sound-9335: msm8952_asoc_machine_probe: Card uninitialized
  1088. [ 7.041399] apc_mem_acc_corner: disabling
  1089. [ 7.041403] gfx_mem_acc_corner: disabling
  1090. [ 7.041441] adv_vreg: disabling
  1091. [ 7.042008] TMST: disabling
  1092. [ 7.042030] clock_late_init: Removing enables held for handed-off clocks
  1093. [ 7.046221] Total: 85
  1094. [ 7.046226] Total: 16
  1095. [ 7.047621] ALSA device list:
  1096. [ 7.047622] No soundcards found.
  1097. [ 7.049644] msm8952-slimbus-wcd c051000.sound-9335: MUX addr invalid for QUIN PCM
  1098. [ 7.049647] msm8952-slimbus-wcd c051000.sound-9335: MUX addr invalid for EXT CLK CTL
  1099. [ 7.049651] msm8952-slimbus-wcd c051000.sound-9335: MUX addr invalid for SEC TLMM CTL
  1100. [ 7.049657] msm8952-slimbus-wcd c051000.sound-9335: msm8952_asoc_machine_probe: Card uninitialized
  1101. [ 7.898015] smbchg_set_usb_present_work: start set usb present!!
  1102. [ 8.109489] Freeing unused kernel memory: 504K
  1103. [ 8.112933] Freeing alternatives memory: 112K
  1104. [ 8.120990] init: init first stage started!
  1105. [ 8.124156] init: First stage mount skipped (recovery mode)
  1106. [ 8.129825] init: Using Android DT directory /proc/device-tree/firmware/android/
  1107. [ 8.137175] init: Skipped setting INIT_AVB_VERSION (not vbmeta compatible)
  1108. [ 8.144026] init: Loading SELinux policy
  1109. [ 8.255771] audit: type=1403 audit(7283.729:2): policy loaded auid=4294967295 ses=4294967295
  1110. [ 8.263478] selinux: SELinux: Loaded policy from /sepolicy
  1111. [ 8.263478]
  1112. [ 8.270403] init: kernel_enforcing: 0, is_enforcing: 0, is_recovery_mode: 1
  1113. [ 8.277062] init:
  1114. [ 8.283607] selinux: SELinux: Loaded file_contexts
  1115. [ 8.283607]
  1116. [ 8.289948] random: init urandom read with 101 bits of entropy available
  1117. [ 8.297698] init: init second stage started!
  1118. [ 8.323608] init: Using Android DT directory /proc/device-tree/firmware/android/
  1119. [ 8.335113] selinux: SELinux: Loaded file_contexts
  1120. [ 8.335113]
  1121. [ 8.340385] init: Running restorecon...
  1122. [ 8.350194] selinux: SELinux: Could not stat /dev/block: No such file or directory.
  1123. [ 8.350194]
  1124. [ 8.358884] init: waitid failed: No child processes
  1125. [ 8.363307] init: Couldn't load property file '/system/etc/prop.default': open() failed: No such file or directory: No such file or directory
  1126. [ 8.376619] init: Unable to set property 'ro.adb.secure' to '0' in property file '/prop.default': Read-only property was already set
  1127. [ 8.390094] init: Unable to set property 'ro.cutoff_voltage_mv' to '3400' in property file '/prop.default': Read-only property was already set
  1128. [ 8.402930] init: Unable to set property 'ro.af.client_heap_size_kbyte' to '7168' in property file '/prop.default': Read-only property was already set
  1129. [ 8.415514] init: Couldn't load property file '/product/build.prop': open() failed: No such file or directory: No such file or directory
  1130. [ 8.427652] init: Couldn't load property file '/odm/default.prop': open() failed: No such file or directory: No such file or directory
  1131. [ 8.439708] init: Couldn't load property file '/vendor/default.prop': open() failed: No such file or directory: No such file or directory
  1132. [ 8.452537] init: Created socket '/dev/socket/property_service', mode 666, user 0, group 0
  1133. [ 8.461042] init: Forked subcontext for 'u:r:vendor_init:s0' with pid 414
  1134. [ 8.467732] init: Forked subcontext for 'u:r:vendor_init:s0' with pid 415
  1135. [ 8.473919] init: Parsing file /init.rc...
  1136. [ 8.477952] init: Added '/init.recovery.qcom.rc' to import list
  1137. [ 8.484116] init: Parsing file /init.recovery.qcom.rc...
  1138. [ 8.489158] init: Parsing file /system/etc/init...
  1139. [ 8.493865] init: Unable to read config file '/system/etc/init': open() failed: No such file or directory
  1140. [ 8.503438] init: Parsing file /product/etc/init...
  1141. [ 8.508301] init: Unable to read config file '/product/etc/init': open() failed: No such file or directory
  1142. [ 8.517896] init: Parsing file /odm/etc/init...
  1143. [ 8.522428] init: Unable to read config file '/odm/etc/init': open() failed: No such file or directory
  1144. [ 8.531715] init: Parsing file /vendor/etc/init...
  1145. [ 8.536480] init: Unable to read config file '/vendor/etc/init': open() failed: No such file or directory
  1146. [ 8.546085] init: processing action (early-init) from (/init.rc:3)
  1147. [ 8.552259] init: starting service 'ueventd'...
  1148. [ 8.557629] init: processing action (wait_for_coldboot_done) from (<Builtin Action>:0)
  1149. [ 8.560310] ueventd: ueventd started!
  1150. [ 8.564272] selinux: SELinux: Loaded file_contexts
  1151. [ 8.564272]
  1152. [ 8.564530] ueventd: Parsing file /ueventd.rc...
  1153. [ 8.565044] ueventd: Parsing file /vendor/ueventd.rc...
  1154. [ 8.565077] ueventd: Unable to read config file '/vendor/ueventd.rc': open() failed: No such file or directory
  1155. [ 8.565098] ueventd: Parsing file /odm/ueventd.rc...
  1156. [ 8.565122] ueventd: Unable to read config file '/odm/ueventd.rc': open() failed: No such file or directory
  1157. [ 8.565140] ueventd: Parsing file /ueventd.qcom.rc...
  1158. [ 8.565162] ueventd: Unable to read config file '/ueventd.qcom.rc': open() failed: No such file or directory
  1159. [ 8.632492] ueventd: firmware: loading 'ttdl_cmcp_thresholdfile.csv' for '/devices/soc/78b7000.i2c/i2c-3/3-0024/firmware/ttdl_cmcp_thresholdfile.csv'
  1160. [ 9.988769] ueventd: Coldboot took 1.421 seconds
  1161. [ 9.995481] init: wait for '/dev/.coldboot_done' took 1371ms
  1162. [ 10.000225] init: Command 'wait_for_coldboot_done' action=wait_for_coldboot_done (<Builtin Action>:0) took 1376ms and succeeded
  1163. [ 10.008042] fail to open /onyxconfig/waveform/waveform.wbf!
  1164. [ 10.008045] onyx_epdc_init_wavefw(): request_firmware_nowait [/waveform/eink_waveform.wbf]!
  1165. [ 10.008070] fail to open /waveform/cfa_lut.bin!
  1166. [ 10.008435] onyx_epdc_fb_fw_handler(): fw->size=282231
  1167. [ 10.008556] onyx_waveform_parse_and_init_panel(): enter!
  1168. [ 10.008558] o_w_p_p(): is_5bit_to_4bit= 0!
  1169. [ 10.008562] o_w_p_p(): file_size=282231, fpl_material_version=0x0, waveform_mode_version[0x10]=0x19, WFM_REV[0x16]=0x0, waveform_version=0xde
  1170. [ 10.008565] o_w_p_p(): frame_rate=85HZ, waveform_lookup_table_fmt = 4, waveform_mode_table_address=0x5f, mode_num=8, temp_num=14, gray_num=32
  1171. [ 10.008567] o_w_p_p(): waveform file [320_R137_AFDE01_ES103TD1C1_TC]!
  1172. [ 10.050177] o_w_p_p(): OK!
  1173. [ 10.050181] mode[0] = 99 frames.
  1174. [ 10.050183] mode[1] = 22 frames.
  1175. [ 10.050184] mode[2] = 38 frames.
  1176. [ 10.050185] mode[3] = 38 frames.
  1177. [ 10.050186] mode[4] = 38 frames.
  1178. [ 10.050188] mode[5] = 38 frames.
  1179. [ 10.050189] mode[6] = 10 frames.
  1180. [ 10.050190] mode[7] = 24 frames.
  1181. [ 10.050192] onyx_waveform_mode_transform_init(): waveform_mode_version[0x25]
  1182. [ 10.050195] get_glr16_mode_index(): waveform_info_index = 7.
  1183. [ 10.050198] get_glr16_mode_index(): gc16[2] glr16[4] gld16[5] a2[6] gcc16[-1] glrc16[-1].
  1184. [ 10.050200] o_c_w_d_p(): waveform_mode_index = 4!
  1185. [ 10.050322] o_c_w_d_p(): waveform_mode_index = 5!
  1186. [ 10.050444] o_e_d_mode0(): begin!
  1187. [ 10.050447] onyx_epdc_set_temp(): set temp[24] temp_index[8]!
  1188. [ 10.052083] onyx_epdc_draw_mode0(): kernel_init_mode_disable[1]!
  1189. [ 10.065214] onyx_epdc_draw_mode0(): splash mem w[139] h[627] bpp[16] at x[864] y[388].
  1190. [ 10.160902] init: processing action (MixHwrngIntoLinuxRng) from (<Builtin Action>:0)
  1191. [ 10.169122] init: Mixed 512 bytes from /dev/hw_random into /dev/urandom
  1192. [ 10.175136] init: processing action (SetMmapRndBits) from (<Builtin Action>:0)
  1193. [ 10.183168] init: processing action (SetKptrRestrict) from (<Builtin Action>:0)
  1194. [ 10.189840] init: processing action (keychord_init) from (<Builtin Action>:0)
  1195. [ 10.196731] init: processing action (console_init) from (<Builtin Action>:0)
  1196. [ 10.203797] init: processing action (init) from (/init.rc:8)
  1197. [ 10.768120] of_batterydata_get_best_profile: 4038356_actionprowave_a835_cholipower_4300mah_pmi8952_averaged_masterslave_jul15th2019 found
  1198. [ 10.783711] FG: fg_batt_profile_init: vbat_est_diff: 17853uv, allow range: 50000uv
  1199. [ 10.792903] FG: fg_batt_profile_init: Battery SOC: 68, V: 3988929uV
  1200. [ 10.798534] of_batterydata_get_best_profile: 4038356_actionprowave_a835_cholipower_4300mah_pmi8952_averaged_masterslave_jul15th2019 found
  1201. [ 10.810493] SMBCHG: smbchg_config_chg_battery_type: Vfloat changed from 4400mV to 4350mV for battery-type 4038356_actionprowave_a835_cholipower_4300mah_pmi8952_averaged_masterslave_jul15th2019
  1202. [ 18.708025] mdss_mdp_epdc_thread: mdss_mdp_epdc_thread(): start!!
  1203. [ 18.713217] mdss_mdp_epdc_thread: mdss epdc open fb0.
  1204. [ 18.718135] ################ fb_blank(): caller = mdss_mdp_epdc_thread+0x110/0x920, blank=0
  1205. [ 18.737195] ################ fb_blank(): END!
  1206. [ 32.538293] random: nonblocking pool is initialized
  1207. [ 66.408148] cyttsp5_i2c_adapter 3-0024: cyttsp5_cmcp_parse_threshold_file: No builtin cmcp threshold file
  1208.  
Advertisement
Add Comment
Please, Sign In to add comment
Public Pastes
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!