Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- [ 0.000000] Initializing cgroup subsys cpuset
- [ 0.000000] Initializing cgroup subsys cpu
- [ 0.000000] Initializing cgroup subsys cpuacct
- [ 0.000000] Linux version 3.12.5-gentoo (root@kombajn) (gcc version 4.7.3 (Gentoo 4.7.3-r1 p1.3, pie-0.5.5) ) #1 SMP Sat Dec 14 00:10:55 CET 2013
- [ 0.000000] Command line: BOOT_IMAGE=/boot/kernel-3.12.5-c01-gentoo root=/dev/sda5 ro nomodeset init=/usr/lib/systemd/systemd video=vesafb:mtrr:3,ywrap vga=795
- [ 0.000000] e820: BIOS-provided physical RAM map:
- [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009d3ff] usable
- [ 0.000000] BIOS-e820: [mem 0x000000000009d400-0x000000000009ffff] reserved
- [ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
- [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x0000000094caffff] usable
- [ 0.000000] BIOS-e820: [mem 0x0000000094cb0000-0x00000000960affff] reserved
- [ 0.000000] BIOS-e820: [mem 0x00000000960b0000-0x000000009a6befff] usable
- [ 0.000000] BIOS-e820: [mem 0x000000009a6bf000-0x000000009aebefff] reserved
- [ 0.000000] BIOS-e820: [mem 0x000000009aebf000-0x000000009afbefff] ACPI NVS
- [ 0.000000] BIOS-e820: [mem 0x000000009afbf000-0x000000009affefff] ACPI data
- [ 0.000000] BIOS-e820: [mem 0x000000009afff000-0x000000009affffff] usable
- [ 0.000000] BIOS-e820: [mem 0x000000009b000000-0x000000009f9fffff] reserved
- [ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
- [ 0.000000] BIOS-e820: [mem 0x00000000feb00000-0x00000000feb0ffff] reserved
- [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
- [ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fee00fff] reserved
- [ 0.000000] BIOS-e820: [mem 0x00000000ffc00000-0x00000000ffffffff] reserved
- [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000045f5fffff] usable
- [ 0.000000] NX (Execute Disable) protection: active
- [ 0.000000] SMBIOS 2.7 present.
- [ 0.000000] DMI: Acer Aspire V3-772/VA70_HW, BIOS V1.12 09/19/2013
- [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
- [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
- [ 0.000000] No AGP bridge found
- [ 0.000000] e820: last_pfn = 0x45f600 max_arch_pfn = 0x400000000
- [ 0.000000] MTRR default type: uncachable
- [ 0.000000] MTRR fixed ranges enabled:
- [ 0.000000] 00000-9FFFF write-back
- [ 0.000000] A0000-BFFFF uncachable
- [ 0.000000] C0000-E7FFF write-protect
- [ 0.000000] E8000-EFFFF write-combining
- [ 0.000000] F0000-FFFFF write-protect
- [ 0.000000] MTRR variable ranges enabled:
- [ 0.000000] 0 base 0000000000 mask 7F80000000 write-back
- [ 0.000000] 1 base 0080000000 mask 7FE0000000 write-back
- [ 0.000000] 2 base 009B000000 mask 7FFF000000 uncachable
- [ 0.000000] 3 base 009C000000 mask 7FFC000000 uncachable
- [ 0.000000] 4 base 00FFC00000 mask 7FFFC00000 write-protect
- [ 0.000000] 5 base 0100000000 mask 7F00000000 write-back
- [ 0.000000] 6 base 0200000000 mask 7E00000000 write-back
- [ 0.000000] 7 base 0400000000 mask 7F80000000 write-back
- [ 0.000000] 8 base 045F600000 mask 7FFFE00000 uncachable
- [ 0.000000] 9 base 045F800000 mask 7FFF800000 uncachable
- [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
- [ 0.000000] e820: last_pfn = 0x9b000 max_arch_pfn = 0x400000000
- [ 0.000000] found SMP MP-table at [mem 0x000fe200-0x000fe20f] mapped at [ffff8800000fe200]
- [ 0.000000] Scanning 1 areas for low memory corruption
- [ 0.000000] Base memory trampoline at [ffff880000097000] 97000 size 24576
- [ 0.000000] Using GB pages for direct mapping
- [ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
- [ 0.000000] [mem 0x00000000-0x000fffff] page 4k
- [ 0.000000] BRK [0x02106000, 0x02106fff] PGTABLE
- [ 0.000000] BRK [0x02107000, 0x02107fff] PGTABLE
- [ 0.000000] BRK [0x02108000, 0x02108fff] PGTABLE
- [ 0.000000] init_memory_mapping: [mem 0x45f400000-0x45f5fffff]
- [ 0.000000] [mem 0x45f400000-0x45f5fffff] page 2M
- [ 0.000000] BRK [0x02109000, 0x02109fff] PGTABLE
- [ 0.000000] init_memory_mapping: [mem 0x45c000000-0x45f3fffff]
- [ 0.000000] [mem 0x45c000000-0x45f3fffff] page 2M
- [ 0.000000] init_memory_mapping: [mem 0x400000000-0x45bffffff]
- [ 0.000000] [mem 0x400000000-0x43fffffff] page 1G
- [ 0.000000] [mem 0x440000000-0x45bffffff] page 2M
- [ 0.000000] init_memory_mapping: [mem 0x00100000-0x94caffff]
- [ 0.000000] [mem 0x00100000-0x001fffff] page 4k
- [ 0.000000] [mem 0x00200000-0x3fffffff] page 2M
- [ 0.000000] [mem 0x40000000-0x7fffffff] page 1G
- [ 0.000000] [mem 0x80000000-0x94bfffff] page 2M
- [ 0.000000] [mem 0x94c00000-0x94caffff] page 4k
- [ 0.000000] init_memory_mapping: [mem 0x960b0000-0x9a6befff]
- [ 0.000000] [mem 0x960b0000-0x961fffff] page 4k
- [ 0.000000] [mem 0x96200000-0x9a5fffff] page 2M
- [ 0.000000] [mem 0x9a600000-0x9a6befff] page 4k
- [ 0.000000] BRK [0x0210a000, 0x0210afff] PGTABLE
- [ 0.000000] BRK [0x0210b000, 0x0210bfff] PGTABLE
- [ 0.000000] init_memory_mapping: [mem 0x9afff000-0x9affffff]
- [ 0.000000] [mem 0x9afff000-0x9affffff] page 4k
- [ 0.000000] init_memory_mapping: [mem 0x100000000-0x3ffffffff]
- [ 0.000000] [mem 0x100000000-0x3ffffffff] page 1G
- [ 0.000000] ACPI: RSDP 00000000000fe020 00024 (v02 ACRSYS)
- [ 0.000000] ACPI: XSDT 000000009affe210 000AC (v01 ACRSYS ACRPRDCT 00000001 01000013)
- [ 0.000000] ACPI: FACP 000000009aff5000 0010C (v05 ACRSYS ACRPRDCT 00000001 1025 00040000)
- [ 0.000000] ACPI: DSDT 000000009afde000 13FE7 (v01 ACRSYS ACRPRDCT 00000000 1025 00040000)
- [ 0.000000] ACPI: FACS 000000009afaf000 00040
- [ 0.000000] ACPI: ECDT 000000009affd000 000C1 (v01 ACRSYS ACRPRDCT 00000001 1025 00040000)
- [ 0.000000] ACPI: UEFI 000000009affc000 00236 (v01 ACRSYS ACRPRDCT 00000001 1025 00040000)
- [ 0.000000] ACPI: FPDT 000000009affa000 00044 (v01 ACRSYS ACRPRDCT 00000001 1025 00040000)
- [ 0.000000] ACPI: SSDT 000000009aff8000 00538 (v01 ACRSYS ACRPRDCT 00003000 1025 00040000)
- [ 0.000000] ACPI: SSDT 000000009aff7000 00ABA (v01 ACRSYS ACRPRDCT 00003000 1025 00040000)
- [ 0.000000] ACPI: ASF! 000000009aff6000 000A5 (v32 ACRSYS ACRPRDCT 00000001 1025 00040000)
- [ 0.000000] ACPI: HPET 000000009aff4000 00038 (v01 ACRSYS ACRPRDCT 00000001 1025 00040000)
- [ 0.000000] ACPI: APIC 000000009aff3000 0008C (v03 ACRSYS ACRPRDCT 00000001 1025 00040000)
- [ 0.000000] ACPI: MCFG 000000009aff2000 0003C (v01 ACRSYS ACRPRDCT 00000001 1025 00040000)
- [ 0.000000] ACPI: SSDT 000000009afdc000 013A4 (v01 ACRSYS ACRPRDCT 00001000 1025 00040000)
- [ 0.000000] ACPI: SSDT 000000009afdb000 00172 (v01 ACRSYS ACRPRDCT 00003000 1025 00040000)
- [ 0.000000] ACPI: BOOT 000000009afda000 00028 (v01 ACRSYS ACRPRDCT 00000001 1025 00040000)
- [ 0.000000] ACPI: ASPT 000000009afd9000 00034 (v07 ACRSYS ACRPRDCT 00000001 1025 00040000)
- [ 0.000000] ACPI: DBGP 000000009afd8000 00034 (v01 ACRSYS ACRPRDCT 00000001 1025 00040000)
- [ 0.000000] ACPI: SSDT 000000009afd4000 03352 (v01 ACRSYS ACRPRDCT 00003000 1025 00040000)
- [ 0.000000] ACPI: SSDT 000000009afd0000 0362A (v01 ACRSYS ACRPRDCT 00001000 1025 00040000)
- [ 0.000000] ACPI: Local APIC address 0xfee00000
- [ 0.000000] No NUMA configuration found
- [ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000045f5fffff]
- [ 0.000000] Initmem setup node 0 [mem 0x00000000-0x45f5fffff]
- [ 0.000000] NODE_DATA [mem 0x45f5f9000-0x45f5fcfff]
- [ 0.000000] [ffffea0000000000-ffffea00117fffff] PMD -> [ffff88044ec00000-ffff88045ebfffff] on node 0
- [ 0.000000] Zone ranges:
- [ 0.000000] DMA [mem 0x00001000-0x00ffffff]
- [ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
- [ 0.000000] Normal [mem 0x100000000-0x45f5fffff]
- [ 0.000000] Movable zone start for each node
- [ 0.000000] Early memory node ranges
- [ 0.000000] node 0: [mem 0x00001000-0x0009cfff]
- [ 0.000000] node 0: [mem 0x00100000-0x94caffff]
- [ 0.000000] node 0: [mem 0x960b0000-0x9a6befff]
- [ 0.000000] node 0: [mem 0x9afff000-0x9affffff]
- [ 0.000000] node 0: [mem 0x100000000-0x45f5fffff]
- [ 0.000000] On node 0 totalpages: 4163676
- [ 0.000000] DMA zone: 64 pages used for memmap
- [ 0.000000] DMA zone: 21 pages reserved
- [ 0.000000] DMA zone: 3996 pages, LIFO batch:0
- [ 0.000000] DMA32 zone: 9739 pages used for memmap
- [ 0.000000] DMA32 zone: 623296 pages, LIFO batch:31
- [ 0.000000] Normal zone: 55256 pages used for memmap
- [ 0.000000] Normal zone: 3536384 pages, LIFO batch:31
- [ 0.000000] ACPI: PM-Timer IO Port: 0x1808
- [ 0.000000] ACPI: Local APIC address 0xfee00000
- [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
- [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
- [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
- [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
- [ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x04] enabled)
- [ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x05] enabled)
- [ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x06] enabled)
- [ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x07] enabled)
- [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
- [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
- [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
- [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
- [ 0.000000] ACPI: IRQ0 used by override.
- [ 0.000000] ACPI: IRQ2 used by override.
- [ 0.000000] ACPI: IRQ9 used by override.
- [ 0.000000] Using ACPI (MADT) for SMP configuration information
- [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
- [ 0.000000] smpboot: Allowing 8 CPUs, 0 hotplug CPUs
- [ 0.000000] nr_irqs_gsi: 40
- [ 0.000000] PM: Registered nosave memory: [mem 0x0009d000-0x0009dfff]
- [ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
- [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
- [ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
- [ 0.000000] PM: Registered nosave memory: [mem 0x94cb0000-0x960affff]
- [ 0.000000] PM: Registered nosave memory: [mem 0x9a6bf000-0x9aebefff]
- [ 0.000000] PM: Registered nosave memory: [mem 0x9aebf000-0x9afbefff]
- [ 0.000000] PM: Registered nosave memory: [mem 0x9afbf000-0x9affefff]
- [ 0.000000] PM: Registered nosave memory: [mem 0x9b000000-0x9f9fffff]
- [ 0.000000] PM: Registered nosave memory: [mem 0x9fa00000-0xdfffffff]
- [ 0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xefffffff]
- [ 0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xfeafffff]
- [ 0.000000] PM: Registered nosave memory: [mem 0xfeb00000-0xfeb0ffff]
- [ 0.000000] PM: Registered nosave memory: [mem 0xfeb10000-0xfebfffff]
- [ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
- [ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff]
- [ 0.000000] PM: Registered nosave memory: [mem 0xfed00000-0xfee00fff]
- [ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xffbfffff]
- [ 0.000000] PM: Registered nosave memory: [mem 0xffc00000-0xffffffff]
- [ 0.000000] e820: [mem 0x9fa00000-0xdfffffff] available for PCI devices
- [ 0.000000] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:8 nr_node_ids:1
- [ 0.000000] PERCPU: Embedded 27 pages/cpu @ffff88045f200000 s79808 r8192 d22592 u262144
- [ 0.000000] pcpu-alloc: s79808 r8192 d22592 u262144 alloc=1*2097152
- [ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
- [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 4098596
- [ 0.000000] Policy zone: Normal
- [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/kernel-3.12.5-c01-gentoo root=/dev/sda5 ro nomodeset init=/usr/lib/systemd/systemd video=vesafb:mtrr:3,ywrap vga=795
- [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
- [ 0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340
- [ 0.000000] Checking aperture...
- [ 0.000000] No AGP bridge found
- [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
- [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
- [ 0.000000] Memory: 16307920K/16654704K available (8661K kernel code, 880K rwdata, 3064K rodata, 1172K init, 996K bss, 346784K reserved)
- [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
- [ 0.000000] Hierarchical RCU implementation.
- [ 0.000000] RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=8.
- [ 0.000000] NR_IRQS:4352 nr_irqs:744 16
- [ 0.000000] Console: colour dummy device 80x25
- [ 0.000000] console [tty0] enabled
- [ 0.000000] hpet clockevent registered
- [ 0.000000] tsc: Fast TSC calibration using PIT
- [ 0.001000] tsc: Detected 2194.915 MHz processor
- [ 0.000002] Calibrating delay loop (skipped), value calculated using timer frequency.. 4389.83 BogoMIPS (lpj=2194915)
- [ 0.000007] pid_max: default: 32768 minimum: 301
- [ 0.000028] Security Framework initialized
- [ 0.000945] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
- [ 0.003702] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
- [ 0.004894] Mount-cache hash table entries: 256
- [ 0.005041] Initializing cgroup subsys freezer
- [ 0.005063] CPU: Physical Processor ID: 0
- [ 0.005065] CPU: Processor Core ID: 0
- [ 0.005070] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
- ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
- [ 0.006026] mce: CPU supports 9 MCE banks
- [ 0.006042] CPU0: Thermal monitoring enabled (TM1)
- [ 0.006055] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0
- Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0
- tlb_flushall_shift: 6
- [ 0.006185] Freeing SMP alternatives memory: 32K (ffffffff82003000 - ffffffff8200b000)
- [ 0.006188] ACPI: Core revision 20130725
- [ 0.016386] ACPI: All ACPI Tables successfully acquired
- [ 0.017561] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
- [ 0.027575] smpboot: CPU0: Intel(R) Core(TM) i7-4702MQ CPU @ 2.20GHz (fam: 06, model: 3c, stepping: 03)
- [ 0.027584] TSC deadline timer enabled
- [ 0.027591] Performance Events: PEBS fmt2+, 16-deep LBR, Haswell events, full-width counters, Intel PMU driver.
- [ 0.027600] ... version: 3
- [ 0.027602] ... bit width: 48
- [ 0.027603] ... generic registers: 4
- [ 0.027605] ... value mask: 0000ffffffffffff
- [ 0.027607] ... max period: 0000ffffffffffff
- [ 0.027609] ... fixed-purpose events: 3
- [ 0.027611] ... event mask: 000000070000000f
- [ 0.027787] smpboot: Booting Node 0, Processors # 1 # 2 # 3 # 4 # 5 # 6 # 7 OK
- [ 0.127678] Brought up 8 CPUs
- [ 0.127683] smpboot: Total of 8 processors activated (35118.64 BogoMIPS)
- [ 0.134789] devtmpfs: initialized
- [ 0.134959] PM: Registering ACPI NVS region [mem 0x9aebf000-0x9afbefff] (1048576 bytes)
- [ 0.135148] NET: Registered protocol family 16
- [ 0.135237] cpuidle: using governor ladder
- [ 0.135239] cpuidle: using governor menu
- [ 0.135276] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
- [ 0.135279] ACPI: bus type PCI registered
- [ 0.135316] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
- [ 0.135320] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
- [ 0.156634] PCI: Using configuration type 1 for base access
- [ 0.157946] bio: create slab <bio-0> at 0
- [ 0.158067] ACPI: Added _OSI(Module Device)
- [ 0.158069] ACPI: Added _OSI(Processor Device)
- [ 0.158071] ACPI: Added _OSI(3.0 _SCP Extensions)
- [ 0.158073] ACPI: Added _OSI(Processor Aggregator Device)
- [ 0.160147] ACPI: EC: EC description table is found, configuring boot EC
- [ 0.162250] ACPI: Executed 1 blocks of module-level executable AML code
- [ 0.171742] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
- [ 0.173039] ACPI: SSDT 000000009ae58c18 003D3 (v01 PmRef Cpu0Cst 00003001 INTL 20120518)
- [ 0.173564] ACPI: Dynamic OEM Table Load:
- [ 0.173567] ACPI: SSDT (null) 003D3 (v01 PmRef Cpu0Cst 00003001 INTL 20120518)
- [ 0.177949] ACPI: SSDT 000000009ae58618 005AA (v01 PmRef ApIst 00003000 INTL 20120518)
- [ 0.178542] ACPI: Dynamic OEM Table Load:
- [ 0.178545] ACPI: SSDT (null) 005AA (v01 PmRef ApIst 00003000 INTL 20120518)
- [ 0.182832] ACPI: SSDT 000000009ae57d98 00119 (v01 PmRef ApCst 00003000 INTL 20120518)
- [ 0.183354] ACPI: Dynamic OEM Table Load:
- [ 0.183356] ACPI: SSDT (null) 00119 (v01 PmRef ApCst 00003000 INTL 20120518)
- [ 0.188985] ACPI: Interpreter enabled
- [ 0.188993] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20130725/hwxface-571)
- [ 0.189002] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20130725/hwxface-571)
- [ 0.189022] ACPI: (supports S0 S3 S4 S5)
- [ 0.189025] ACPI: Using IOAPIC for interrupt routing
- [ 0.189050] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
- [ 0.189227] ACPI: No dock devices found.
- [ 0.202363] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
- [ 0.202581] acpi PNP0A08:00: Requesting ACPI _OSC control (0x1d)
- [ 0.202933] acpi PNP0A08:00: ACPI _OSC control (0x1d) granted
- [ 0.203367] PCI host bridge to bus 0000:00
- [ 0.203371] pci_bus 0000:00: root bus resource [bus 00-fe]
- [ 0.203374] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
- [ 0.203376] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
- [ 0.203379] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
- [ 0.203382] pci_bus 0000:00: root bus resource [mem 0x9fa00000-0xfeafffff]
- [ 0.203391] pci 0000:00:00.0: [8086:0c04] type 00 class 0x060000
- [ 0.203538] pci 0000:00:01.0: [8086:0c01] type 01 class 0x060400
- [ 0.203571] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
- [ 0.203684] pci 0000:00:01.0: System wakeup disabled by ACPI
- [ 0.203715] pci 0000:00:02.0: [8086:0416] type 00 class 0x030000
- [ 0.203726] pci 0000:00:02.0: reg 0x10: [mem 0xd3000000-0xd33fffff 64bit]
- [ 0.203732] pci 0000:00:02.0: reg 0x18: [mem 0xc0000000-0xcfffffff 64bit pref]
- [ 0.203737] pci 0000:00:02.0: reg 0x20: [io 0x5000-0x503f]
- [ 0.203878] pci 0000:00:03.0: [8086:0c0c] type 00 class 0x040300
- [ 0.203885] pci 0000:00:03.0: reg 0x10: [mem 0xd3610000-0xd3613fff 64bit]
- [ 0.204046] pci 0000:00:14.0: [8086:8c31] type 00 class 0x0c0330
- [ 0.204064] pci 0000:00:14.0: reg 0x10: [mem 0xd3600000-0xd360ffff 64bit]
- [ 0.204122] pci 0000:00:14.0: PME# supported from D3hot D3cold
- [ 0.204226] pci 0000:00:14.0: System wakeup disabled by ACPI
- [ 0.204253] pci 0000:00:16.0: [8086:8c3a] type 00 class 0x078000
- [ 0.204272] pci 0000:00:16.0: reg 0x10: [mem 0xd3618000-0xd361800f 64bit]
- [ 0.204333] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
- [ 0.204468] pci 0000:00:1a.0: [8086:8c2d] type 00 class 0x0c0320
- [ 0.204487] pci 0000:00:1a.0: reg 0x10: [mem 0xd361d000-0xd361d3ff]
- [ 0.204571] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
- [ 0.204686] pci 0000:00:1a.0: System wakeup disabled by ACPI
- [ 0.204715] pci 0000:00:1b.0: [8086:8c20] type 00 class 0x040300
- [ 0.204728] pci 0000:00:1b.0: reg 0x10: [mem 0xd3614000-0xd3617fff 64bit]
- [ 0.204790] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
- [ 0.204899] pci 0000:00:1b.0: System wakeup disabled by ACPI
- [ 0.204924] pci 0000:00:1c.0: [8086:8c10] type 01 class 0x060400
- [ 0.204987] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
- [ 0.205093] pci 0000:00:1c.0: System wakeup disabled by ACPI
- [ 0.205119] pci 0000:00:1c.2: [8086:8c14] type 01 class 0x060400
- [ 0.205181] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
- [ 0.205287] pci 0000:00:1c.2: System wakeup disabled by ACPI
- [ 0.205312] pci 0000:00:1c.3: [8086:8c16] type 01 class 0x060400
- [ 0.205374] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
- [ 0.205480] pci 0000:00:1c.3: System wakeup disabled by ACPI
- [ 0.205511] pci 0000:00:1d.0: [8086:8c26] type 00 class 0x0c0320
- [ 0.205531] pci 0000:00:1d.0: reg 0x10: [mem 0xd361c000-0xd361c3ff]
- [ 0.205615] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
- [ 0.205729] pci 0000:00:1d.0: System wakeup disabled by ACPI
- [ 0.205758] pci 0000:00:1f.0: [8086:8c49] type 00 class 0x060100
- [ 0.205981] pci 0000:00:1f.2: [8086:8c03] type 00 class 0x010601
- [ 0.205996] pci 0000:00:1f.2: reg 0x10: [io 0x5088-0x508f]
- [ 0.206003] pci 0000:00:1f.2: reg 0x14: [io 0x5094-0x5097]
- [ 0.206010] pci 0000:00:1f.2: reg 0x18: [io 0x5080-0x5087]
- [ 0.206018] pci 0000:00:1f.2: reg 0x1c: [io 0x5090-0x5093]
- [ 0.206025] pci 0000:00:1f.2: reg 0x20: [io 0x5060-0x507f]
- [ 0.206032] pci 0000:00:1f.2: reg 0x24: [mem 0xd361b000-0xd361b7ff]
- [ 0.206068] pci 0000:00:1f.2: PME# supported from D3hot
- [ 0.206187] pci 0000:00:1f.3: [8086:8c22] type 00 class 0x0c0500
- [ 0.206201] pci 0000:00:1f.3: reg 0x10: [mem 0xd3619000-0xd36190ff 64bit]
- [ 0.206221] pci 0000:00:1f.3: reg 0x20: [io 0x5040-0x505f]
- [ 0.206385] pci 0000:01:00.0: [10de:0fe4] type 00 class 0x030200
- [ 0.206393] pci 0000:01:00.0: reg 0x10: [mem 0xd2000000-0xd2ffffff]
- [ 0.206401] pci 0000:01:00.0: reg 0x14: [mem 0xa0000000-0xafffffff 64bit pref]
- [ 0.206409] pci 0000:01:00.0: reg 0x1c: [mem 0xb0000000-0xb1ffffff 64bit pref]
- [ 0.206415] pci 0000:01:00.0: reg 0x24: [io 0x4000-0x407f]
- [ 0.206421] pci 0000:01:00.0: reg 0x30: [mem 0x00000000-0x0007ffff pref]
- [ 0.206460] pci 0000:01:00.0: System wakeup disabled by ACPI
- [ 0.207837] pci 0000:00:01.0: PCI bridge to [bus 01-06]
- [ 0.207840] pci 0000:00:01.0: bridge window [io 0x4000-0x4fff]
- [ 0.207843] pci 0000:00:01.0: bridge window [mem 0xd2000000-0xd2ffffff]
- [ 0.207846] pci 0000:00:01.0: bridge window [mem 0xa0000000-0xbfffffff 64bit pref]
- [ 0.207906] pci 0000:07:00.0: [10ec:5209] type 00 class 0xff0000
- [ 0.207923] pci 0000:07:00.0: reg 0x10: [mem 0xd1000000-0xd1000fff]
- [ 0.208046] pci 0000:07:00.0: supports D1 D2
- [ 0.208047] pci 0000:07:00.0: PME# supported from D1 D2 D3hot
- [ 0.208072] pci 0000:07:00.0: System wakeup disabled by ACPI
- [ 0.209845] pci 0000:00:1c.0: PCI bridge to [bus 07-0c]
- [ 0.209850] pci 0000:00:1c.0: bridge window [io 0x3000-0x3fff]
- [ 0.209853] pci 0000:00:1c.0: bridge window [mem 0xd1000000-0xd1ffffff]
- [ 0.209858] pci 0000:00:1c.0: bridge window [mem 0xd0000000-0xd0ffffff 64bit pref]
- [ 0.209918] pci 0000:0d:00.0: [168c:0034] type 00 class 0x028000
- [ 0.209940] pci 0000:0d:00.0: reg 0x10: [mem 0xd3500000-0xd357ffff 64bit]
- [ 0.209993] pci 0000:0d:00.0: reg 0x30: [mem 0xffff0000-0xffffffff pref]
- [ 0.210046] pci 0000:0d:00.0: supports D1 D2
- [ 0.210048] pci 0000:0d:00.0: PME# supported from D0 D1 D2 D3hot D3cold
- [ 0.210070] pci 0000:0d:00.0: System wakeup disabled by ACPI
- [ 0.211848] pci 0000:00:1c.2: PCI bridge to [bus 0d]
- [ 0.211854] pci 0000:00:1c.2: bridge window [mem 0xd3500000-0xd35fffff]
- [ 0.211950] pci 0000:0e:00.0: [14e4:1692] type 00 class 0x020000
- [ 0.211973] pci 0000:0e:00.0: reg 0x10: [mem 0xd3400000-0xd340ffff 64bit]
- [ 0.212097] pci 0000:0e:00.0: PME# supported from D3hot D3cold
- [ 0.212123] pci 0000:0e:00.0: System wakeup disabled by ACPI
- [ 0.213887] pci 0000:00:1c.3: PCI bridge to [bus 0e]
- [ 0.213893] pci 0000:00:1c.3: bridge window [mem 0xd3400000-0xd34fffff]
- [ 0.213920] acpi PNP0A08:00: Disabling ASPM (FADT indicates it is unsupported)
- [ 0.214636] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 11 12 14 15) *7
- [ 0.214682] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
- [ 0.214726] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 *11 12 14 15)
- [ 0.214768] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 *10 11 12 14 15)
- [ 0.214809] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
- [ 0.214855] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
- [ 0.214899] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 *10 11 12 14 15)
- [ 0.214941] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 *11 12 14 15)
- [ 0.215365] ACPI: Enabled 4 GPEs in block 00 to 3F
- [ 0.215372] ACPI: \_SB_.PCI0: notify handler is installed
- [ 0.215436] Found 1 acpi root devices
- [ 0.215478] ACPI: EC: GPE = 0x1d, I/O: command/status = 0x66, data = 0x62
- [ 0.215523] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
- [ 0.215528] vgaarb: loaded
- [ 0.215530] vgaarb: bridge control possible 0000:00:02.0
- [ 0.215576] SCSI subsystem initialized
- [ 0.215610] libata version 3.00 loaded.
- [ 0.215625] ACPI: bus type USB registered
- [ 0.215639] usbcore: registered new interface driver usbfs
- [ 0.215646] usbcore: registered new interface driver hub
- [ 0.215662] usbcore: registered new device driver usb
- [ 0.215677] pps_core: LinuxPPS API ver. 1 registered
- [ 0.215679] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
- [ 0.215683] PTP clock support registered
- [ 0.216086] wmi: Mapper loaded
- [ 0.216099] Advanced Linux Sound Architecture Driver Initialized.
- [ 0.216101] PCI: Using ACPI for IRQ routing
- [ 0.221807] PCI: pci_cache_line_size set to 64 bytes
- [ 0.221849] e820: reserve RAM buffer [mem 0x0009d400-0x0009ffff]
- [ 0.221850] e820: reserve RAM buffer [mem 0x94cb0000-0x97ffffff]
- [ 0.221851] e820: reserve RAM buffer [mem 0x9a6bf000-0x9bffffff]
- [ 0.221853] e820: reserve RAM buffer [mem 0x9b000000-0x9bffffff]
- [ 0.221854] e820: reserve RAM buffer [mem 0x45f600000-0x45fffffff]
- [ 0.221919] Bluetooth: Core ver 2.16
- [ 0.221925] NET: Registered protocol family 31
- [ 0.221927] Bluetooth: HCI device and connection manager initialized
- [ 0.221930] Bluetooth: HCI socket layer initialized
- [ 0.221932] Bluetooth: L2CAP socket layer initialized
- [ 0.221936] Bluetooth: SCO socket layer initialized
- [ 0.221986] cfg80211: Calling CRDA to update world regulatory domain
- [ 0.222092] NetLabel: Initializing
- [ 0.222096] NetLabel: domain hash size = 128
- [ 0.222098] NetLabel: protocols = UNLABELED CIPSOv4
- [ 0.222117] NetLabel: unlabeled traffic allowed by default
- [ 0.222187] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
- [ 0.222194] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
- [ 0.224223] Switched to clocksource hpet
- [ 0.228487] pnp: PnP ACPI init
- [ 0.228495] ACPI: bus type PNP registered
- [ 0.228520] pnp 00:00: [dma 4]
- [ 0.228533] pnp 00:00: Plug and Play ACPI device, IDs PNP0200 (active)
- [ 0.228548] pnp 00:01: Plug and Play ACPI device, IDs INT0800 (active)
- [ 0.228645] pnp 00:02: Plug and Play ACPI device, IDs PNP0103 (active)
- [ 0.228682] pnp 00:03: Plug and Play ACPI device, IDs PNP0c04 (active)
- [ 0.228709] system 00:04: [io 0x0680-0x069f] has been reserved
- [ 0.228713] system 00:04: [io 0xffff] has been reserved
- [ 0.228715] system 00:04: [io 0xffff] has been reserved
- [ 0.228718] system 00:04: [io 0xffff] has been reserved
- [ 0.228721] system 00:04: [io 0x1800-0x18fe] could not be reserved
- [ 0.228723] system 00:04: [io 0x164e-0x164f] has been reserved
- [ 0.228727] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
- [ 0.228760] system 00:05: [io 0x0800-0x087f] has been reserved
- [ 0.228764] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
- [ 0.228780] pnp 00:06: Plug and Play ACPI device, IDs PNP0b00 (active)
- [ 0.228814] system 00:07: [io 0x1854-0x1857] has been reserved
- [ 0.228817] system 00:07: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
- [ 0.228850] pnp 00:08: Plug and Play ACPI device, IDs PNP0303 (active)
- [ 0.228872] pnp 00:09: Plug and Play ACPI device, IDs SYN1b66 SYN1b00 SYN0002 PNP0f13 (active)
- [ 0.228989] system 00:0a: [mem 0xfed1c000-0xfed1ffff] has been reserved
- [ 0.228993] system 00:0a: [mem 0xfed10000-0xfed17fff] has been reserved
- [ 0.228996] system 00:0a: [mem 0xfed18000-0xfed18fff] has been reserved
- [ 0.228998] system 00:0a: [mem 0xfed19000-0xfed19fff] has been reserved
- [ 0.229002] system 00:0a: [mem 0xe0000000-0xefffffff] has been reserved
- [ 0.229004] system 00:0a: [mem 0xfed20000-0xfed3ffff] has been reserved
- [ 0.229007] system 00:0a: [mem 0xfed90000-0xfed93fff] has been reserved
- [ 0.229010] system 00:0a: [mem 0xff000000-0xffffffff] could not be reserved
- [ 0.229013] system 00:0a: [mem 0xfee00000-0xfeefffff] could not be reserved
- [ 0.229016] system 00:0a: [mem 0x9fa20000-0x9fa20fff] has been reserved
- [ 0.229019] system 00:0a: [mem 0x9fa10000-0x9fa1ffff] has been reserved
- [ 0.229022] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
- [ 0.229465] pnp: PnP ACPI: found 11 devices
- [ 0.229468] ACPI: bus type PNP unregistered
- [ 0.234007] pci 0000:0d:00.0: no compatible bridge window for [mem 0xffff0000-0xffffffff pref]
- [ 0.234034] pci 0000:00:1c.2: BAR 9: assigned [mem 0x9fb00000-0x9fbfffff pref]
- [ 0.234038] pci 0000:01:00.0: BAR 6: assigned [mem 0xb2000000-0xb207ffff pref]
- [ 0.234042] pci 0000:00:01.0: PCI bridge to [bus 01-06]
- [ 0.234045] pci 0000:00:01.0: bridge window [io 0x4000-0x4fff]
- [ 0.234049] pci 0000:00:01.0: bridge window [mem 0xd2000000-0xd2ffffff]
- [ 0.234053] pci 0000:00:01.0: bridge window [mem 0xa0000000-0xbfffffff 64bit pref]
- [ 0.234058] pci 0000:00:1c.0: PCI bridge to [bus 07-0c]
- [ 0.234062] pci 0000:00:1c.0: bridge window [io 0x3000-0x3fff]
- [ 0.234067] pci 0000:00:1c.0: bridge window [mem 0xd1000000-0xd1ffffff]
- [ 0.234072] pci 0000:00:1c.0: bridge window [mem 0xd0000000-0xd0ffffff 64bit pref]
- [ 0.234079] pci 0000:0d:00.0: BAR 6: assigned [mem 0x9fb00000-0x9fb0ffff pref]
- [ 0.234082] pci 0000:00:1c.2: PCI bridge to [bus 0d]
- [ 0.234087] pci 0000:00:1c.2: bridge window [mem 0xd3500000-0xd35fffff]
- [ 0.234092] pci 0000:00:1c.2: bridge window [mem 0x9fb00000-0x9fbfffff pref]
- [ 0.234099] pci 0000:00:1c.3: PCI bridge to [bus 0e]
- [ 0.234104] pci 0000:00:1c.3: bridge window [mem 0xd3400000-0xd34fffff]
- [ 0.234113] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
- [ 0.234114] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
- [ 0.234116] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
- [ 0.234117] pci_bus 0000:00: resource 7 [mem 0x9fa00000-0xfeafffff]
- [ 0.234119] pci_bus 0000:01: resource 0 [io 0x4000-0x4fff]
- [ 0.234120] pci_bus 0000:01: resource 1 [mem 0xd2000000-0xd2ffffff]
- [ 0.234122] pci_bus 0000:01: resource 2 [mem 0xa0000000-0xbfffffff 64bit pref]
- [ 0.234123] pci_bus 0000:07: resource 0 [io 0x3000-0x3fff]
- [ 0.234125] pci_bus 0000:07: resource 1 [mem 0xd1000000-0xd1ffffff]
- [ 0.234126] pci_bus 0000:07: resource 2 [mem 0xd0000000-0xd0ffffff 64bit pref]
- [ 0.234127] pci_bus 0000:0d: resource 1 [mem 0xd3500000-0xd35fffff]
- [ 0.234129] pci_bus 0000:0d: resource 2 [mem 0x9fb00000-0x9fbfffff pref]
- [ 0.234130] pci_bus 0000:0e: resource 1 [mem 0xd3400000-0xd34fffff]
- [ 0.234156] NET: Registered protocol family 2
- [ 0.234384] TCP established hash table entries: 131072 (order: 9, 2097152 bytes)
- [ 0.234675] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
- [ 0.234789] TCP: Hash tables configured (established 131072 bind 65536)
- [ 0.234805] TCP: reno registered
- [ 0.234824] UDP hash table entries: 8192 (order: 6, 262144 bytes)
- [ 0.234873] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
- [ 0.234950] NET: Registered protocol family 1
- [ 0.235022] RPC: Registered named UNIX socket transport module.
- [ 0.235025] RPC: Registered udp transport module.
- [ 0.235027] RPC: Registered tcp transport module.
- [ 0.235029] RPC: Registered tcp NFSv4.1 backchannel transport module.
- [ 0.235037] pci 0000:00:02.0: Boot video device
- [ 0.236301] pci 0000:00:14.0: CONFIG_USB_XHCI_HCD is turned off, defaulting to EHCI.
- [ 0.236305] pci 0000:00:14.0: USB 3.0 devices will work at USB 2.0 speeds.
- [ 0.236446] pci 0000:00:1a.0: EHCI: BIOS handoff
- [ 0.247449] pci 0000:00:1d.0: EHCI: BIOS handoff
- [ 0.258368] PCI: CLS 64 bytes, default 64
- [ 0.258475] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
- [ 0.258480] software IO TLB [mem 0x966bf000-0x9a6bf000] (64MB) mapped at [ffff8800966bf000-ffff88009a6befff]
- [ 0.258679] Simple Boot Flag at 0x44 set to 0x1
- [ 0.259136] microcode: CPU0 sig=0x306c3, pf=0x10, revision=0x16
- [ 0.259143] microcode: CPU1 sig=0x306c3, pf=0x10, revision=0x16
- [ 0.259150] microcode: CPU2 sig=0x306c3, pf=0x10, revision=0x16
- [ 0.259158] microcode: CPU3 sig=0x306c3, pf=0x10, revision=0x16
- [ 0.259163] microcode: CPU4 sig=0x306c3, pf=0x10, revision=0x16
- [ 0.259170] microcode: CPU5 sig=0x306c3, pf=0x10, revision=0x16
- [ 0.259180] microcode: CPU6 sig=0x306c3, pf=0x10, revision=0x16
- [ 0.259189] microcode: CPU7 sig=0x306c3, pf=0x10, revision=0x16
- [ 0.259210] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
- [ 0.259214] Scanning for low memory corruption every 60 seconds
- [ 0.259912] HugeTLB registered 2 MB page size, pre-allocated 0 pages
- [ 0.260781] VFS: Disk quotas dquot_6.5.2
- [ 0.260813] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
- [ 0.261204] NFS: Registering the id_resolver key type
- [ 0.261211] Key type id_resolver registered
- [ 0.261213] Key type id_legacy registered
- [ 0.261332] fuse init (API version 7.22)
- [ 0.261386] msgmni has been set to 31851
- [ 0.261491] cryptomgr_test (58) used greatest stack depth: 7144 bytes left
- [ 0.261514] cryptomgr_test (59) used greatest stack depth: 6896 bytes left
- [ 0.261763] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
- [ 0.261767] io scheduler noop registered
- [ 0.261787] io scheduler cfq registered (default)
- [ 0.261902] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
- [ 0.262019] pcieport 0000:00:1c.0: irq 41 for MSI/MSI-X
- [ 0.262141] pcieport 0000:00:1c.2: irq 42 for MSI/MSI-X
- [ 0.262269] pcieport 0000:00:1c.3: irq 43 for MSI/MSI-X
- [ 0.262331] pcieport 0000:00:01.0: Signaling PME through PCIe PME interrupt
- [ 0.262334] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt
- [ 0.262338] pcie_pme 0000:00:01.0:pcie01: service driver pcie_pme loaded
- [ 0.262353] pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt
- [ 0.262356] pci 0000:07:00.0: Signaling PME through PCIe PME interrupt
- [ 0.262361] pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded
- [ 0.262373] pcieport 0000:00:1c.2: Signaling PME through PCIe PME interrupt
- [ 0.262375] pci 0000:0d:00.0: Signaling PME through PCIe PME interrupt
- [ 0.262380] pcie_pme 0000:00:1c.2:pcie01: service driver pcie_pme loaded
- [ 0.262394] pcieport 0000:00:1c.3: Signaling PME through PCIe PME interrupt
- [ 0.262397] pci 0000:0e:00.0: Signaling PME through PCIe PME interrupt
- [ 0.262401] pcie_pme 0000:00:1c.3:pcie01: service driver pcie_pme loaded
- [ 0.262405] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
- [ 0.262430] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
- [ 0.262777] Non-volatile memory driver v1.3
- [ 0.262780] Linux agpgart interface v0.103
- [ 0.262807] vesafb: mode is 1280x1024x32, linelength=5120, pages=0
- [ 0.262810] vesafb: scrolling: redraw
- [ 0.262812] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
- [ 0.262818] mtrr: no more MTRRs available
- [ 0.263272] vesafb: framebuffer at 0xc0000000, mapped to 0xffffc90011c80000, using 5120k, total 5120k
- [ 0.266532] Console: switching to colour frame buffer device 160x64
- [ 0.269654] fb0: VESA VGA frame buffer device
- [ 0.269677] intel_idle: MWAIT substates: 0x42120
- [ 0.269678] intel_idle: v0.4 model 0x3C
- [ 0.269679] intel_idle: lapic_timer_reliable_states 0xffffffff
- [ 0.274328] ACPI: AC Adapter [AC0] (on-line)
- [ 0.274417] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0A08:00/PNP0C0C:00/input/input0
- [ 0.274457] ACPI: Power Button [PWRB]
- [ 0.274495] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0A08:00/PNP0C0E:00/input/input1
- [ 0.274533] ACPI: Sleep Button [SLPB]
- [ 0.274576] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input2
- [ 0.275325] ACPI: Lid Switch [LID]
- [ 0.275365] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
- [ 0.275397] ACPI: Power Button [PWRF]
- [ 0.275474] ACPI: Requesting acpi_cpufreq
- [ 0.275565] kworker/u16:0 (71) used greatest stack depth: 5816 bytes left
- [ 0.276325] thermal LNXTHERM:00: registered as thermal_zone0
- [ 0.276352] ACPI: Thermal Zone [THRM] (50 C)
- [ 0.276393] [drm] Initialized drm 1.1.0 20060810
- [ 0.276630] [drm:drm_pci_agp_init] *ERROR* Cannot initialize the agpgart module.
- [ 0.276662] DRM: Fill_in_dev failed.
- [ 0.277187] loop: module loaded
- [ 0.277242] ahci 0000:00:1f.2: version 3.0
- [ 0.277362] ahci 0000:00:1f.2: irq 44 for MSI/MSI-X
- [ 0.277409] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 4 ports 6 Gbps 0x34 impl SATA mode
- [ 0.277445] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part ems apst
- [ 0.277478] ahci 0000:00:1f.2: setting latency timer to 64
- [ 0.281577] ACPI: Battery Slot [BAT0] (battery present)
- [ 0.281850] scsi0 : ahci
- [ 0.281917] scsi1 : ahci
- [ 0.281975] scsi2 : ahci
- [ 0.282031] scsi3 : ahci
- [ 0.282085] scsi4 : ahci
- [ 0.282138] scsi5 : ahci
- [ 0.282169] ata1: DUMMY
- [ 0.282181] ata2: DUMMY
- [ 0.282194] ata3: SATA max UDMA/133 abar m2048@0xd361b000 port 0xd361b200 irq 44
- [ 0.282224] ata4: DUMMY
- [ 0.282237] ata5: SATA max UDMA/133 abar m2048@0xd361b000 port 0xd361b300 irq 44
- [ 0.282268] ata6: SATA max UDMA/133 abar m2048@0xd361b000 port 0xd361b380 irq 44
- [ 0.282403] tg3.c:v3.133 (Jul 29, 2013)
- [ 0.289011] libphy: tg3 mdio bus: probed
- [ 0.294701] tg3 0000:0e:00.0 eth0: Tigon3 [partno(BCM57780) rev 57780001] (PCI Express) MAC address 54:be:f7:76:77:ed
- [ 0.295768] tg3 0000:0e:00.0 eth0: attached PHY driver [Broadcom BCM57780] (mii_bus:phy_addr=e00:01)
- [ 0.296829] tg3 0000:0e:00.0 eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
- [ 0.297894] tg3 0000:0e:00.0 eth0: dma_rwctrl[76180000] dma_mask[64-bit]
- [ 0.299017] e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI
- [ 0.300083] e100: Copyright(c) 1999-2006 Intel Corporation
- [ 0.301156] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI
- [ 0.302224] e1000: Copyright (c) 1999-2006 Intel Corporation.
- [ 0.312655] ath: EEPROM regdomain: 0x6c
- [ 0.312657] ath: EEPROM indicates we should expect a direct regpair map
- [ 0.312659] ath: Country alpha2 being used: 00
- [ 0.312660] ath: Regpair used: 0x6c
- [ 0.313122] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
- [ 0.313207] ieee80211 phy0: Atheros AR9462 Rev:2 mem=0xffffc90012200000, irq=18
- [ 0.314377] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
- [ 0.315453] ehci_hcd: block sizes: qh 112 qtd 96 itd 192 sitd 96
- [ 0.315455] ehci-pci: EHCI PCI platform driver
- [ 0.316605] ehci-pci 0000:00:1a.0: setting latency timer to 64
- [ 0.316611] ehci-pci 0000:00:1a.0: EHCI Host Controller
- [ 0.317702] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
- [ 0.318779] ehci-pci 0000:00:1a.0: debug port 2
- [ 0.319834] ehci-pci 0000:00:1a.0: reset hcs_params 0x200002 dbg=2 cc=0 pcc=0 ordered !ppc ports=2
- [ 0.319836] ehci-pci 0000:00:1a.0: reset hcc_params 36881 caching frame 1024 64 bit addr
- [ 0.319849] ehci-pci 0000:00:1a.0: reset command 0080002 (park)=0 ithresh=8 period=1024 Reset HALT
- [ 0.323747] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
- [ 0.323748] ehci-pci 0000:00:1a.0: supports USB remote wakeup
- [ 0.323759] ehci-pci 0000:00:1a.0: irq 16, io mem 0xd361d000
- [ 0.324810] ehci-pci 0000:00:1a.0: init command 0010001 (park)=0 ithresh=1 period=1024 RUN
- [ 0.330356] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
- [ 0.331431] usb usb1: default language 0x0409
- [ 0.331440] usb usb1: udev 1, busnum 1, minor = 0
- [ 0.331442] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
- [ 0.332496] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 0.333550] usb usb1: Product: EHCI Host Controller
- [ 0.334601] usb usb1: Manufacturer: Linux 3.12.5-gentoo ehci_hcd
- [ 0.335655] usb usb1: SerialNumber: 0000:00:1a.0
- [ 0.336791] usb usb1: usb_probe_device
- [ 0.336795] usb usb1: configuration #1 chosen from 1 choice
- [ 0.336807] usb usb1: adding 1-0:1.0 (config #1, interface 0)
- [ 0.336822] hub 1-0:1.0: usb_probe_interface
- [ 0.336823] hub 1-0:1.0: usb_probe_interface - got id
- [ 0.336825] hub 1-0:1.0: USB hub found
- [ 0.337861] hub 1-0:1.0: 2 ports detected
- [ 0.338874] hub 1-0:1.0: standalone hub
- [ 0.338875] hub 1-0:1.0: no power switching (usb 1.0)
- [ 0.338876] hub 1-0:1.0: individual port over-current protection
- [ 0.338877] hub 1-0:1.0: power on to power good time: 20ms
- [ 0.338883] hub 1-0:1.0: local power source is good
- [ 0.338934] usb usb1: usb port1's DeviceRemovable is changed to 1 according to platform information.
- [ 0.338936] hub 1-0:1.0: trying to enable port power on non-switchable hub
- [ 0.339050] ehci-pci 0000:00:1d.0: setting latency timer to 64
- [ 0.339055] ehci-pci 0000:00:1d.0: EHCI Host Controller
- [ 0.340138] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
- [ 0.341181] ehci-pci 0000:00:1d.0: debug port 2
- [ 0.342184] ehci-pci 0000:00:1d.0: reset hcs_params 0x200002 dbg=2 cc=0 pcc=0 ordered !ppc ports=2
- [ 0.342187] ehci-pci 0000:00:1d.0: reset hcc_params 36881 caching frame 1024 64 bit addr
- [ 0.342198] ehci-pci 0000:00:1d.0: reset command 0080002 (park)=0 ithresh=8 period=1024 Reset HALT
- [ 0.346077] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
- [ 0.346078] ehci-pci 0000:00:1d.0: supports USB remote wakeup
- [ 0.346091] ehci-pci 0000:00:1d.0: irq 23, io mem 0xd361c000
- [ 0.347080] ehci-pci 0000:00:1d.0: init command 0010001 (park)=0 ithresh=1 period=1024 RUN
- [ 0.352378] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
- [ 0.353371] usb usb2: default language 0x0409
- [ 0.353380] usb usb2: udev 1, busnum 2, minor = 128
- [ 0.353382] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
- [ 0.354342] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 0.355297] usb usb2: Product: EHCI Host Controller
- [ 0.356238] usb usb2: Manufacturer: Linux 3.12.5-gentoo ehci_hcd
- [ 0.357176] usb usb2: SerialNumber: 0000:00:1d.0
- [ 0.358239] usb usb2: usb_probe_device
- [ 0.358242] usb usb2: configuration #1 chosen from 1 choice
- [ 0.358251] usb usb2: adding 2-0:1.0 (config #1, interface 0)
- [ 0.358264] hub 2-0:1.0: usb_probe_interface
- [ 0.358266] hub 2-0:1.0: usb_probe_interface - got id
- [ 0.358267] hub 2-0:1.0: USB hub found
- [ 0.359202] hub 2-0:1.0: 2 ports detected
- [ 0.360114] hub 2-0:1.0: standalone hub
- [ 0.360115] hub 2-0:1.0: no power switching (usb 1.0)
- [ 0.360116] hub 2-0:1.0: individual port over-current protection
- [ 0.360118] hub 2-0:1.0: power on to power good time: 20ms
- [ 0.360123] hub 2-0:1.0: local power source is good
- [ 0.360172] usb usb2: usb port1's DeviceRemovable is changed to 1 according to platform information.
- [ 0.360174] hub 2-0:1.0: trying to enable port power on non-switchable hub
- [ 0.360209] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
- [ 0.361130] ohci_hcd: block sizes: ed 80 td 96
- [ 0.361134] ohci-pci: OHCI PCI platform driver
- [ 0.362054] uhci_hcd: USB Universal Host Controller Interface driver
- [ 0.362997] usbcore: registered new interface driver usblp
- [ 0.363931] usbcore: registered new interface driver usb-storage
- [ 0.364857] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
- [ 0.368294] i8042: Detected active multiplexing controller, rev 1.1
- [ 0.370918] serio: i8042 KBD port at 0x60,0x64 irq 1
- [ 0.371835] serio: i8042 AUX0 port at 0x60,0x64 irq 12
- [ 0.372763] serio: i8042 AUX1 port at 0x60,0x64 irq 12
- [ 0.373669] serio: i8042 AUX2 port at 0x60,0x64 irq 12
- [ 0.374573] serio: i8042 AUX3 port at 0x60,0x64 irq 12
- [ 0.375566] mousedev: PS/2 mouse device common for all mice
- [ 0.377005] rtc_cmos 00:06: RTC can wake from S4
- [ 0.378132] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
- [ 0.379096] rtc_cmos 00:06: alarms up to one month, 242 bytes nvram, hpet irqs
- [ 0.380140] ACPI Warning: 0x0000000000005040-0x000000000000505f SystemIO conflicts with Region \_SB_.PCI0.SBUS.SMBI 1 (20130725/utaddress-251)
- [ 0.381158] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
- [ 0.382299] device-mapper: ioctl: 4.26.0-ioctl (2013-08-15) initialised: dm-devel@redhat.com
- [ 0.383343] hidraw: raw HID events driver (C) Jiri Kosina
- [ 0.384454] usbcore: registered new interface driver usbhid
- [ 0.385488] usbhid: USB HID core driver
- [ 0.386508] acer_wmi: Acer Laptop ACPI-WMI Extras
- [ 0.387543] acer_wmi: Function bitmap for Communication Button: 0x801
- [ 0.388659] acer_wmi: Brightness must be controlled by acpi video driver
- [ 0.391598] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
- [ 0.401012] acer_wmi: Enabling Launch Manager failed: 0xe2 - 0x0
- [ 0.402094] input: Acer WMI hotkeys as /devices/virtual/input/input6
- [ 0.403492] input: Acer BMA150 accelerometer as /devices/virtual/input/input7
- [ 0.412240] atkbd serio0: Unknown key released (translated set 2, code 0x7c on isa0060/serio0).
- [ 0.416595] kworker/u16:4 (90) used greatest stack depth: 5728 bytes left
- [ 0.416632] ------------[ cut here ]------------
- [ 0.416638] WARNING: CPU: 5 PID: 88 at drivers/gpu/drm/i915/intel_pm.c:5342 i915_request_power_well+0x67/0x70()
- [ 0.416639] Modules linked in:
- [ 0.416641] CPU: 5 PID: 88 Comm: kworker/5:1 Not tainted 3.12.5-gentoo #1
- [ 0.416641] Hardware name: Acer Aspire V3-772/VA70_HW, BIOS V1.12 09/19/2013
- [ 0.416646] Workqueue: events azx_probe_work
- [ 0.416649] 0000000000000009 ffff88044c2afcb8 ffffffff8186620c 0000000000000000
- [ 0.416650] 0000000000000000 ffff88044c2afcf8 ffffffff81087157 0000000000000000
- [ 0.416651] ffff88044c70f300 ffff88045f3523c0 0000000000000000 ffff88044c703000
- [ 0.416651] Call Trace:
- [ 0.416656] [<ffffffff8186620c>] dump_stack+0x46/0x58
- [ 0.416660] [<ffffffff81087157>] warn_slowpath_common+0x87/0xb0
- [ 0.416661] [<ffffffff81087195>] warn_slowpath_null+0x15/0x20
- [ 0.416663] [<ffffffff8144f177>] i915_request_power_well+0x67/0x70
- [ 0.416665] [<ffffffff816708c2>] hda_display_power+0x32/0x40
- [ 0.416667] [<ffffffff8166eb29>] azx_probe_continue+0x49/0xb80
- [ 0.416670] [<ffffffff81632a66>] ? snd_seq_do_ioctl+0xa6/0xb0
- [ 0.416672] [<ffffffff8166fca0>] azx_probe_work+0x10/0x20
- [ 0.416674] [<ffffffff810a0a96>] process_one_work+0x176/0x400
- [ 0.416676] [<ffffffff810a1169>] worker_thread+0x119/0x370
- [ 0.416677] [<ffffffff810a1050>] ? rescuer_thread+0x2f0/0x2f0
- [ 0.416680] [<ffffffff810a7cab>] kthread+0xbb/0xc0
- [ 0.416682] [<ffffffff810a7bf0>] ? kthread_create_on_node+0x120/0x120
- [ 0.416686] [<ffffffff8186fdfc>] ret_from_fork+0x7c/0xb0
- [ 0.416688] [<ffffffff810a7bf0>] ? kthread_create_on_node+0x120/0x120
- [ 0.416691] ---[ end trace 16f0772d7987f056 ]---
- [ 0.416715] snd_hda_intel 0000:00:03.0: irq 45 for MSI/MSI-X
- [ 0.416831] snd_hda_intel 0000:00:1b.0: irq 46 for MSI/MSI-X
- [ 0.445339] atkbd serio0: Use 'setkeycodes 7c <keycode>' to make it known.
- [ 0.446439] ehci-pci 0000:00:1a.0: GetStatus port:1 status 001803 0 ACK POWER sig=j CSC CONNECT
- [ 0.446454] hub 1-0:1.0: port 1: status 0501 change 0001
- [ 0.449072] hda_codec: invalid CONNECT_LIST verb 6[1]:0
- [ 0.454384] Netfilter messages via NETLINK v0.30.
- [ 0.455464] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
- [ 0.456591] ctnetlink v0.93: registering with nfnetlink.
- [ 0.458156] ip_tables: (C) 2000-2006 Netfilter Core Team
- [ 0.459335] TCP: cubic registered
- [ 0.459473] ehci-pci 0000:00:1d.0: GetStatus port:1 status 001803 0 ACK POWER sig=j CSC CONNECT
- [ 0.459479] hub 2-0:1.0: port 1: status 0501 change 0001
- [ 0.460394] Initializing XFRM netlink socket
- [ 0.461520] NET: Registered protocol family 10
- [ 0.462710] ip6_tables: (C) 2000-2006 Netfilter Core Team
- [ 0.464338] sit: IPv6 over IPv4 tunneling driver
- [ 0.465496] NET: Registered protocol family 17
- [ 0.466589] Key type dns_resolver registered
- [ 0.467899] registered taskstats version 1
- [ 0.469399] console [netcon0] enabled
- [ 0.470474] netconsole: network logging started
- [ 0.472935] PM: Hibernation image not present or could not be loaded.
- [ 0.472937] ALSA device list:
- [ 0.474004] #0: HDA Intel MID at 0xd3610000 irq 45
- [ 0.475047] #1: HDA Intel PCH at 0xd3614000 irq 46
- [ 0.546648] hub 1-0:1.0: state 7 ports 2 chg 0002 evt 0000
- [ 0.546700] hub 1-0:1.0: port 1, status 0501, change 0000, 480 Mb/s
- [ 0.587652] ata5: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
- [ 0.588685] ata6: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
- [ 0.589679] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
- [ 0.591228] ata6.00: ATA-9: WDC WD10JPVX-22JC3T0, 01.01A01, max UDMA/133
- [ 0.592876] ata6.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
- [ 0.594672] ata3.00: ATAPI: HL-DT-ST DVDRAM GT90N, 1.00, max UDMA/133
- [ 0.596414] ata5.00: ATA-8: PLEXTOR PX-128M5M, 1.03, max UDMA/133
- [ 0.597847] ata5.00: 250069680 sectors, multi 1: LBA48 NCQ (depth 31/32), AA
- [ 0.598110] ehci-pci 0000:00:1a.0: port 1 reset complete, port enabled
- [ 0.598113] ehci-pci 0000:00:1a.0: GetStatus port:1 status 001005 0 ACK POWER sig=se0 PE CONNECT
- [ 0.599696] ata6.00: configured for UDMA/133
- [ 0.601466] ata5.00: configured for UDMA/133
- [ 0.602899] ata3.00: configured for UDMA/133
- [ 0.607256] scsi 2:0:0:0: CD-ROM HL-DT-ST DVDRAM GT90N 1.00 PQ: 0 ANSI: 5
- [ 0.611862] atkbd serio0: Unknown key released (translated set 2, code 0x7c on isa0060/serio0).
- [ 0.612837] atkbd serio0: Use 'setkeycodes 7c <keycode>' to make it known.
- [ 0.619361] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
- [ 0.620301] cdrom: Uniform CD-ROM driver Revision: 3.20
- [ 0.621381] sr 2:0:0:0: Attached scsi CD-ROM sr0
- [ 0.621454] sr 2:0:0:0: Attached scsi generic sg0 type 5
- [ 0.622611] scsi 4:0:0:0: Direct-Access ATA PLEXTOR PX-128M5 1.03 PQ: 0 ANSI: 5
- [ 0.623653] sd 4:0:0:0: [sda] 250069680 512-byte logical blocks: (128 GB/119 GiB)
- [ 0.623672] sd 4:0:0:0: Attached scsi generic sg1 type 0
- [ 0.623859] scsi 5:0:0:0: Direct-Access ATA WDC WD10JPVX-22J 01.0 PQ: 0 ANSI: 5
- [ 0.623963] sd 5:0:0:0: Attached scsi generic sg2 type 0
- [ 0.623971] sd 5:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
- [ 0.623972] sd 5:0:0:0: [sdb] 4096-byte physical blocks
- [ 0.624112] sd 5:0:0:0: [sdb] Write Protect is off
- [ 0.624114] sd 5:0:0:0: [sdb] Mode Sense: 00 3a 00 00
- [ 0.624178] sd 5:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
- [ 0.631055] sd 4:0:0:0: [sda] Write Protect is off
- [ 0.631995] sd 4:0:0:0: [sda] Mode Sense: 00 3a 00 00
- [ 0.632006] sd 4:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
- [ 0.633749] sda: sda1 sda2 < sda5 sda6 sda7 >
- [ 0.635046] sd 4:0:0:0: [sda] Attached SCSI disk
- [ 0.648734] usb 1-1: new high-speed USB device number 2 using ehci-pci
- [ 0.700963] ehci-pci 0000:00:1a.0: port 1 reset complete, port enabled
- [ 0.700969] ehci-pci 0000:00:1a.0: GetStatus port:1 status 001005 0 ACK POWER sig=se0 PE CONNECT
- [ 0.764207] usb 1-1: udev 2, busnum 1, minor = 1
- [ 0.764212] usb 1-1: New USB device found, idVendor=8087, idProduct=8008
- [ 0.765219] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
- [ 0.766283] usb 1-1: usb_probe_device
- [ 0.766285] usb 1-1: configuration #1 chosen from 1 choice
- [ 0.766466] usb 1-1: adding 1-1:1.0 (config #1, interface 0)
- [ 0.766491] hub 1-1:1.0: usb_probe_interface
- [ 0.766493] hub 1-1:1.0: usb_probe_interface - got id
- [ 0.766496] hub 1-1:1.0: USB hub found
- [ 0.767579] hub 1-1:1.0: 6 ports detected
- [ 0.768570] hub 1-1:1.0: standalone hub
- [ 0.768572] hub 1-1:1.0: individual port power switching
- [ 0.768573] hub 1-1:1.0: individual port over-current protection
- [ 0.768574] hub 1-1:1.0: Single TT
- [ 0.768576] hub 1-1:1.0: TT requires at most 8 FS bit times (666 ns)
- [ 0.768577] hub 1-1:1.0: power on to power good time: 0ms
- [ 0.768837] hub 1-1:1.0: local power source is good
- [ 0.769059] hub 1-1:1.0: enabling power on all ports
- [ 0.769836] hub 2-0:1.0: state 7 ports 2 chg 0002 evt 0000
- [ 0.769849] hub 2-0:1.0: port 1, status 0501, change 0000, 480 Mb/s
- [ 0.812091] atkbd serio0: Unknown key released (translated set 2, code 0x7c on isa0060/serio0).
- [ 0.813121] atkbd serio0: Use 'setkeycodes 7c <keycode>' to make it known.
- [ 0.821085] ehci-pci 0000:00:1d.0: port 1 reset complete, port enabled
- [ 0.821092] ehci-pci 0000:00:1d.0: GetStatus port:1 status 001005 0 ACK POWER sig=se0 PE CONNECT
- [ 0.870065] hub 1-1:1.0: port 1: status 0101 change 0001
- [ 0.871907] usb 2-1: new high-speed USB device number 2 using ehci-pci
- [ 0.924188] ehci-pci 0000:00:1d.0: port 1 reset complete, port enabled
- [ 0.924194] ehci-pci 0000:00:1d.0: GetStatus port:1 status 001005 0 ACK POWER sig=se0 PE CONNECT
- [ 0.970035] usb 1-1: link qh256-0001/ffff88044c5f9c80 start 1 [1/0 us]
- [ 0.987432] usb 2-1: udev 2, busnum 2, minor = 129
- [ 0.987436] usb 2-1: New USB device found, idVendor=8087, idProduct=8000
- [ 0.988479] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
- [ 0.989574] usb 2-1: usb_probe_device
- [ 0.989576] usb 2-1: configuration #1 chosen from 1 choice
- [ 0.989677] usb 2-1: adding 2-1:1.0 (config #1, interface 0)
- [ 0.989696] hub 2-1:1.0: usb_probe_interface
- [ 0.989698] hub 2-1:1.0: usb_probe_interface - got id
- [ 0.989700] hub 2-1:1.0: USB hub found
- [ 0.990795] hub 2-1:1.0: 8 ports detected
- [ 0.991799] hub 2-1:1.0: standalone hub
- [ 0.991800] hub 2-1:1.0: individual port power switching
- [ 0.991802] hub 2-1:1.0: individual port over-current protection
- [ 0.991803] hub 2-1:1.0: Single TT
- [ 0.991804] hub 2-1:1.0: TT requires at most 8 FS bit times (666 ns)
- [ 0.991806] hub 2-1:1.0: power on to power good time: 0ms
- [ 0.992058] hub 2-1:1.0: local power source is good
- [ 0.992384] hub 2-1:1.0: enabling power on all ports
- [ 0.993454] hub 1-1:1.0: state 7 ports 6 chg 0002 evt 0000
- [ 0.993544] hub 1-1:1.0: port 1, status 0101, change 0000, 12 Mb/s
- [ 1.004196] hub 1-1:1.0: port 1 not reset yet, waiting 10ms
- [ 1.012275] atkbd serio0: Unknown key released (translated set 2, code 0x7c on isa0060/serio0).
- [ 1.013313] atkbd serio0: Use 'setkeycodes 7c <keycode>' to make it known.
- [ 1.025545] sdb: sdb1 < sdb5 >
- [ 1.027008] sd 5:0:0:0: [sdb] Attached SCSI disk
- [ 1.066261] usb 1-1.1: new high-speed USB device number 3 using ehci-pci
- [ 1.093867] hub 2-1:1.0: port 6: status 0101 change 0001
- [ 1.189640] usb 1-1.1: skipped 1 descriptor after configuration
- [ 1.189644] usb 1-1.1: skipped 6 descriptors after interface
- [ 1.189646] usb 1-1.1: skipped 1 descriptor after endpoint
- [ 1.189648] usb 1-1.1: skipped 17 descriptors after interface
- [ 1.191135] usb 1-1.1: default language 0x0409
- [ 1.194242] usb 2-1: link qh256-0001/ffff88044c5f9e00 start 1 [1/0 us]
- [ 1.199274] usb 1-1.1: udev 3, busnum 1, minor = 2
- [ 1.199278] usb 1-1.1: New USB device found, idVendor=1bcf, idProduct=2c55
- [ 1.200335] usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
- [ 1.201372] usb 1-1.1: Product: HD WebCam
- [ 1.202398] usb 1-1.1: Manufacturer: NC.21411.01N33605E86LM0002
- [ 1.203510] usb 1-1.1: usb_probe_device
- [ 1.203513] usb 1-1.1: configuration #1 chosen from 1 choice
- [ 1.203634] usb 1-1.1: adding 1-1.1:1.0 (config #1, interface 0)
- [ 1.221825] atkbd serio0: Unknown key released (translated set 2, code 0x7c on isa0060/serio0).
- [ 1.222902] atkbd serio0: Use 'setkeycodes 7c <keycode>' to make it known.
- [ 1.261320] tsc: Refined TSC clocksource calibration: 2194.917 MHz
- [ 1.273136] usb 1-1.1: adding 1-1.1:1.1 (config #1, interface 1)
- [ 1.273176] hub 1-1:1.0: state 7 ports 6 chg 0000 evt 0002
- [ 1.273347] hub 2-1:1.0: state 7 ports 8 chg 0040 evt 0000
- [ 1.273466] hub 2-1:1.0: port 6, status 0101, change 0000, 12 Mb/s
- [ 1.284478] hub 2-1:1.0: port 6 not reset yet, waiting 10ms
- [ 1.346540] usb 2-1.6: new full-speed USB device number 3 using ehci-pci
- [ 1.358549] hub 2-1:1.0: port 6 not reset yet, waiting 10ms
- [ 1.421700] atkbd serio0: Unknown key released (translated set 2, code 0x7c on isa0060/serio0).
- [ 1.422821] atkbd serio0: Use 'setkeycodes 7c <keycode>' to make it known.
- [ 1.434250] usb 2-1.6: string descriptor 0 read error: -22
- [ 1.435394] usb 2-1.6: udev 3, busnum 2, minor = 130
- [ 1.435397] usb 2-1.6: New USB device found, idVendor=0489, idProduct=e04e
- [ 1.436520] usb 2-1.6: New USB device strings: Mfr=1, Product=2, SerialNumber=3
- [ 1.437728] usb 2-1.6: usb_probe_device
- [ 1.437730] usb 2-1.6: configuration #1 chosen from 1 choice
- [ 1.437865] usb 2-1.6: adding 2-1.6:1.0 (config #1, interface 0)
- [ 1.437903] usb 2-1.6: adding 2-1.6:1.1 (config #1, interface 1)
- [ 1.437940] hub 2-1:1.0: state 7 ports 8 chg 0000 evt 0040
- [ 2.056379] psmouse serio4: synaptics: Touchpad model: 1, fw: 8.1, id: 0x1e2b1, caps: 0xd00423/0x840300/0x126c00, board id: 2134, fw id: 1447239
- [ 2.096835] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input14
- [ 2.100902] md: Waiting for all devices to be available before autodetect
- [ 2.102144] md: If you don't use raid, use raid=noautodetect
- [ 2.103528] md: Autodetecting RAID arrays.
- [ 2.104725] md: Scanned 0 and added 0 devices.
- [ 2.105910] md: autorun ...
- [ 2.107080] md: ... autorun DONE.
- [ 2.110961] EXT4-fs (sda5): couldn't mount as ext3 due to feature incompatibilities
- [ 2.112301] EXT4-fs (sda5): couldn't mount as ext2 due to feature incompatibilities
- [ 2.114120] EXT4-fs (sda5): INFO: recovery required on readonly filesystem
- [ 2.115304] EXT4-fs (sda5): write access will be enabled during recovery
- [ 2.193665] EXT4-fs (sda5): orphan cleanup on readonly fs
- [ 2.194885] EXT4-fs (sda5): 2 orphan inodes deleted
- [ 2.196037] EXT4-fs (sda5): recovery complete
- [ 2.200549] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
- [ 2.201714] VFS: Mounted root (ext4 filesystem) readonly on device 8:5.
- [ 2.203515] Freeing unused kernel memory: 1172K (ffffffff81ede000 - ffffffff82003000)
- [ 2.204667] Write protecting the kernel read-only data: 14336k
- [ 2.208725] Freeing unused kernel memory: 1564K (ffff880001879000 - ffff880001a00000)
- [ 2.211610] Freeing unused kernel memory: 1032K (ffff880001cfe000 - ffff880001e00000)
- [ 2.249558] systemd[1]: systemd 208 running in system mode. (+PAM +LIBWRAP -AUDIT -SELINUX +IMA -SYSVINIT -LIBCRYPTSETUP -GCRYPT +ACL -XZ)
- [ 2.254827] systemd[1]: Set hostname to <kombajn>.
- [ 2.259605] systemd-getty-g (103) used greatest stack depth: 4872 bytes left
- [ 2.262674] systemd-fstab-g (102) used greatest stack depth: 4616 bytes left
- [ 2.263924] Switched to clocksource tsc
- [ 2.270372] lvm2-activation (106) used greatest stack depth: 4504 bytes left
- [ 2.279155] gentoo-local-ge (108) used greatest stack depth: 4488 bytes left
- [ 2.305214] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
- [ 2.306422] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
- [ 2.307597] systemd[1]: Starting mnt-icybox.automount.
- [ 2.310767] systemd[1]: Set up automount mnt-icybox.automount.
- [ 2.311920] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
- [ 2.314282] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
- [ 2.315449] systemd[1]: Starting Delayed Shutdown Socket.
- [ 2.317828] systemd[1]: Listening on Delayed Shutdown Socket.
- [ 2.318992] systemd[1]: Starting Dispatch Password Requests to Console Directory Watch.
- [ 2.320180] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
- [ 2.321356] systemd[1]: Starting Paths.
- [ 2.323708] systemd[1]: Reached target Paths.
- [ 2.324881] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
- [ 2.327351] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
- [ 2.328554] systemd[1]: Starting Journal Socket.
- [ 2.330988] systemd[1]: Listening on Journal Socket.
- [ 2.332593] systemd[1]: Starting Apply Kernel Variables...
- [ 2.337505] systemd[1]: Starting Create list of required static device nodes for the current kernel...
- [ 2.340236] systemd[1]: Starting Journal Service...
- [ 2.344488] systemd[1]: Started Journal Service.
- [ 2.348387] systemd-journald[119]: Vacuuming done, freed 0 bytes
- [ 2.408408] EXT4-fs (sda5): re-mounted. Opts: (null)
- [ 2.416948] systemd-udevd[155]: starting version 208
- [ 2.493617] systemd-udevd[161]: renamed network interface wlan0 to wlp13s0
- [ 2.506629] systemd-udevd[164]: renamed network interface eth0 to enp14s0
- [ 2.557449] Adding 4215804k swap on /dev/sda6. Priority:-1 extents:1 across:4215804k SS
- [ 2.752715] EXT4-fs (sda7): recovery complete
- [ 2.756294] EXT4-fs (sda7): mounted filesystem with ordered data mode. Opts: (null)
- [ 2.757723] mount (451) used greatest stack depth: 4440 bytes left
- [ 2.766651] systemd-journald[119]: Received request to flush runtime journal from PID 1
- [ 2.779128] systemd-journald[119]: File /var/log/journal/06a1edb2b11a49ffa9db29f952894796/system.journal corrupted or uncleanly shut down, renaming and replacing.
- [ 2.902599] bbswitch: version 0.7
- [ 2.903839] bbswitch: Found integrated VGA device 0000:00:02.0: \_SB_.PCI0.GFX0
- [ 2.905002] bbswitch: Found discrete VGA device 0000:01:00.0: \_SB_.PCI0.PEG0.PEGP
- [ 2.906217] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130725/nsarguments-95)
- [ 2.907442] bbswitch: detected an Optimus _DSM function
- [ 2.908542] pci 0000:01:00.0: enabling device (0006 -> 0007)
- [ 2.909673] bbswitch: disabling discrete graphics
- [ 2.909679] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130725/nsarguments-95)
- [ 3.079407] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
- [ 3.390674] systemd-journald[119]: File /var/log/journal/06a1edb2b11a49ffa9db29f952894796/user-1000.journal corrupted or uncleanly shut down, renaming and replacing.
- [ 6.859734] tg3 0000:0e:00.0: irq 47 for MSI/MSI-X
- [ 6.870528] IPv6: ADDRCONF(NETDEV_UP): enp14s0: link is not ready
- [ 7.317401] tg3 0000:0e:00.0 enp14s0: Link is down
- [ 8.238885] bbswitch: Succesfully loaded. Discrete card 0000:01:00.0 is off
- [ 8.239136] modprobe (1395) used greatest stack depth: 4088 bytes left
- [ 12.640922] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
- [ 12.661485] tg3 0000:0e:00.0: irq 47 for MSI/MSI-X
- [ 12.682983] IPv6: ADDRCONF(NETDEV_UP): enp14s0: link is not ready
- [ 12.759302] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
- [ 18.416738] wlp13s0: authenticate with 00:4f:74:30:8c:ce
- [ 18.431187] wlp13s0: send auth to 00:4f:74:30:8c:ce (try 1/3)
- [ 18.433170] wlp13s0: authenticated
- [ 18.433189] ath9k 0000:0d:00.0 wlp13s0: disabling HT as WMM/QoS is not supported by the AP
- [ 18.433191] ath9k 0000:0d:00.0 wlp13s0: disabling VHT as WMM/QoS is not supported by the AP
- [ 18.433474] wlp13s0: associate with 00:4f:74:30:8c:ce (try 1/3)
- [ 18.435916] wlp13s0: RX AssocResp from 00:4f:74:30:8c:ce (capab=0x411 status=0 aid=1)
- [ 18.436203] wlp13s0: associated
- [ 18.436213] IPv6: ADDRCONF(NETDEV_CHANGE): wlp13s0: link becomes ready
- [ 25.391992] mtrr: no MTRR for c0000000,3ff0000 found
- [ 25.723009] systemd-journald[119]: File /var/log/journal/06a1edb2b11a49ffa9db29f952894796/user-105.journal corrupted or uncleanly shut down, renaming and replacing.
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement