API tools faq
paste
Advertisement
Guest User

Untitled

a guest
Jan 31st, 2020
229
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 28.04 KB | None | 0 0
raw download clone embed print report
  1. root@Omega-E194:~# dmesg
  2. [ 0.000000] Linux version 4.14.81 (user@xubu-vm) (gcc version 7.3.0 (OpenWrt GCC 7.3.0 r7460-52a1594fbb)) #0 Thu Jan 30 17:42:06 2020
  3. [ 0.000000] Board has DDR2
  4. [ 0.000000] Analog PMU set to hw control
  5. [ 0.000000] Digital PMU set to hw control
  6. [ 0.000000] SoC Type: MediaTek MT7688 ver:1 eco:2
  7. [ 0.000000] bootconsole [early0] enabled
  8. [ 0.000000] CPU0 revision is: 00019655 (MIPS 24KEc)
  9. [ 0.000000] MIPS: machine is Onion Omega2+
  10. [ 0.000000] Determined physical RAM map:
  11. [ 0.000000] memory: 08000000 @ 00000000 (usable)
  12. [ 0.000000] Initrd not found or empty - disabling initrd
  13. [ 0.000000] Primary instruction cache 64kB, VIPT, 4-way, linesize 32 bytes.
  14. [ 0.000000] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes
  15. [ 0.000000] Zone ranges:
  16. [ 0.000000] Normal [mem 0x0000000000000000-0x0000000007ffffff]
  17. [ 0.000000] Movable zone start for each node
  18. [ 0.000000] Early memory node ranges
  19. [ 0.000000] node 0: [mem 0x0000000000000000-0x0000000007ffffff]
  20. [ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x0000000007ffffff]
  21. [ 0.000000] On node 0 totalpages: 32768
  22. [ 0.000000] free_area_init_node: node 0, pgdat 80500d20, node_mem_map 81000040
  23. [ 0.000000] Normal zone: 256 pages used for memmap
  24. [ 0.000000] Normal zone: 0 pages reserved
  25. [ 0.000000] Normal zone: 32768 pages, LIFO batch:7
  26. [ 0.000000] random: get_random_bytes called from start_kernel+0x8c/0x474 with crng_init=0
  27. [ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
  28. [ 0.000000] pcpu-alloc: [0] 0
  29. [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 32512
  30. [ 0.000000] Kernel command line: console=ttyS0,115200 rootfstype=squashfs,jffs2 debug
  31. [ 0.000000] PID hash table entries: 512 (order: -1, 2048 bytes)
  32. [ 0.000000] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
  33. [ 0.000000] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
  34. [ 0.000000] Writing ErrCtl register=0004000e
  35. [ 0.000000] Readback ErrCtl register=0004000e
  36. [ 0.000000] Memory: 124256K/131072K available (3946K kernel code, 212K rwdata, 988K rodata, 220K init, 209K bss, 6816K reserved, 0K cma-reserved)
  37. [ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
  38. [ 0.000000] NR_IRQS: 256
  39. [ 0.000000] intc: using register map from devicetree
  40. [ 0.000000] CPU Clock: 580MHz
  41. [ 0.000000] timer_probe: no matching timers found
  42. [ 0.000000] clocksource: MIPS: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6590553264 ns
  43. [ 0.000011] sched_clock: 32 bits at 290MHz, resolution 3ns, wraps every 7405115902ns
  44. [ 0.007673] Console: colour dummy device 80x25
  45. [ 0.011929] Calibrating delay loop... 385.84 BogoMIPS (lpj=1929216)
  46. [ 0.073511] pid_max: default: 32768 minimum: 301
  47. [ 0.078197] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
  48. [ 0.084542] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
  49. [ 0.099010] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
  50. [ 0.108506] futex hash table entries: 256 (order: -1, 3072 bytes)
  51. [ 0.114453] pinctrl core: initialized pinctrl subsystem
  52. [ 0.120024] NET: Registered protocol family 16
  53. [ 0.127702] rt2880-pinmux pinctrl: try to register 47 pins ...
  54. [ 0.133346] pinctrl core: registered pin 0 (io0) on rt2880-pinmux
  55. [ 0.139172] pinctrl core: registered pin 1 (io1) on rt2880-pinmux
  56. [ 0.145055] pinctrl core: registered pin 2 (io2) on rt2880-pinmux
  57. [ 0.150928] pinctrl core: registered pin 3 (io3) on rt2880-pinmux
  58. [ 0.156817] pinctrl core: registered pin 4 (io4) on rt2880-pinmux
  59. [ 0.162687] pinctrl core: registered pin 5 (io5) on rt2880-pinmux
  60. [ 0.168578] pinctrl core: registered pin 6 (io6) on rt2880-pinmux
  61. [ 0.174447] pinctrl core: registered pin 7 (io7) on rt2880-pinmux
  62. [ 0.180338] pinctrl core: registered pin 8 (io8) on rt2880-pinmux
  63. [ 0.186207] pinctrl core: registered pin 9 (io9) on rt2880-pinmux
  64. [ 0.192096] pinctrl core: registered pin 10 (io10) on rt2880-pinmux
  65. [ 0.198137] pinctrl core: registered pin 11 (io11) on rt2880-pinmux
  66. [ 0.204195] pinctrl core: registered pin 12 (io12) on rt2880-pinmux
  67. [ 0.210231] pinctrl core: registered pin 13 (io13) on rt2880-pinmux
  68. [ 0.216289] pinctrl core: registered pin 14 (io14) on rt2880-pinmux
  69. [ 0.222328] pinctrl core: registered pin 15 (io15) on rt2880-pinmux
  70. [ 0.228385] pinctrl core: registered pin 16 (io16) on rt2880-pinmux
  71. [ 0.234422] pinctrl core: registered pin 17 (io17) on rt2880-pinmux
  72. [ 0.240481] pinctrl core: registered pin 18 (io18) on rt2880-pinmux
  73. [ 0.246520] pinctrl core: registered pin 19 (io19) on rt2880-pinmux
  74. [ 0.252578] pinctrl core: registered pin 20 (io20) on rt2880-pinmux
  75. [ 0.258614] pinctrl core: registered pin 21 (io21) on rt2880-pinmux
  76. [ 0.264673] pinctrl core: registered pin 22 (io22) on rt2880-pinmux
  77. [ 0.270712] pinctrl core: registered pin 23 (io23) on rt2880-pinmux
  78. [ 0.276769] pinctrl core: registered pin 24 (io24) on rt2880-pinmux
  79. [ 0.282806] pinctrl core: registered pin 25 (io25) on rt2880-pinmux
  80. [ 0.288865] pinctrl core: registered pin 26 (io26) on rt2880-pinmux
  81. [ 0.294904] pinctrl core: registered pin 27 (io27) on rt2880-pinmux
  82. [ 0.300970] pinctrl core: registered pin 28 (io28) on rt2880-pinmux
  83. [ 0.306998] pinctrl core: registered pin 29 (io29) on rt2880-pinmux
  84. [ 0.313056] pinctrl core: registered pin 30 (io30) on rt2880-pinmux
  85. [ 0.319095] pinctrl core: registered pin 31 (io31) on rt2880-pinmux
  86. [ 0.325154] pinctrl core: registered pin 32 (io32) on rt2880-pinmux
  87. [ 0.331190] pinctrl core: registered pin 33 (io33) on rt2880-pinmux
  88. [ 0.337248] pinctrl core: registered pin 34 (io34) on rt2880-pinmux
  89. [ 0.343288] pinctrl core: registered pin 35 (io35) on rt2880-pinmux
  90. [ 0.349346] pinctrl core: registered pin 36 (io36) on rt2880-pinmux
  91. [ 0.355382] pinctrl core: registered pin 37 (io37) on rt2880-pinmux
  92. [ 0.361440] pinctrl core: registered pin 38 (io38) on rt2880-pinmux
  93. [ 0.367479] pinctrl core: registered pin 39 (io39) on rt2880-pinmux
  94. [ 0.373538] pinctrl core: registered pin 40 (io40) on rt2880-pinmux
  95. [ 0.379574] pinctrl core: registered pin 41 (io41) on rt2880-pinmux
  96. [ 0.385632] pinctrl core: registered pin 42 (io42) on rt2880-pinmux
  97. [ 0.391672] pinctrl core: registered pin 43 (io43) on rt2880-pinmux
  98. [ 0.397730] pinctrl core: registered pin 44 (io44) on rt2880-pinmux
  99. [ 0.403766] pinctrl core: registered pin 45 (io45) on rt2880-pinmux
  100. [ 0.409825] pinctrl core: registered pin 46 (io46) on rt2880-pinmux
  101. [ 0.415924] pinctrl core: add 10 pinctrl maps
  102. [ 0.420101] rt2880-pinmux pinctrl: found group selector 14 for gpio
  103. [ 0.426117] rt2880-pinmux pinctrl: found group selector 6 for perst
  104. [ 0.432177] rt2880-pinmux pinctrl: found group selector 5 for refclk
  105. [ 0.438303] rt2880-pinmux pinctrl: found group selector 11 for i2s
  106. [ 0.444275] rt2880-pinmux pinctrl: found group selector 13 for spis
  107. [ 0.450310] rt2880-pinmux pinctrl: found group selector 21 for wled_kn
  108. [ 0.456623] rt2880-pinmux pinctrl: found group selector 15 for wled_an
  109. [ 0.462908] rt2880-pinmux pinctrl: found group selector 7 for wdt
  110. [ 0.468800] rt2880-pinmux pinctrl: found group selector 1 for pwm0
  111. [ 0.474759] rt2880-pinmux pinctrl: found group selector 0 for pwm1
  112. [ 0.480734] rt2880-pinmux pinctrl: request pin 11 (io11) for pinctrl
  113. [ 0.486853] rt2880-pinmux pinctrl: request pin 36 (io36) for pinctrl
  114. [ 0.492991] rt2880-pinmux pinctrl: request pin 37 (io37) for pinctrl
  115. [ 0.499113] rt2880-pinmux pinctrl: request pin 0 (io0) for pinctrl
  116. [ 0.505088] rt2880-pinmux pinctrl: request pin 1 (io1) for pinctrl
  117. [ 0.511038] rt2880-pinmux pinctrl: request pin 2 (io2) for pinctrl
  118. [ 0.517016] rt2880-pinmux pinctrl: request pin 3 (io3) for pinctrl
  119. [ 0.522971] rt2880-pinmux pinctrl: request pin 14 (io14) for pinctrl
  120. [ 0.529112] rt2880-pinmux pinctrl: request pin 15 (io15) for pinctrl
  121. [ 0.535233] rt2880-pinmux pinctrl: request pin 16 (io16) for pinctrl
  122. [ 0.541375] rt2880-pinmux pinctrl: request pin 17 (io17) for pinctrl
  123. [ 0.547497] rt2880-pinmux pinctrl: request pin 35 (io35) for pinctrl
  124. [ 0.553640] rt2880-pinmux pinctrl: request pin 44 (io44) for pinctrl
  125. [ 0.559761] rt2880-pinmux pinctrl: request pin 38 (io38) for pinctrl
  126. [ 0.565904] rt2880-pinmux pinctrl: request pin 18 (io18) for pinctrl
  127. [ 0.572026] rt2880-pinmux pinctrl: request pin 19 (io19) for pinctrl
  128. [ 0.578167] rt2880-pinmux pinctrl: failed to lookup the sleep state
  129. [ 0.617268] mt7621_gpio 10000600.gpio: registering 32 gpios
  130. [ 0.622841] gpio gpiochip0: (10000600.gpio): added GPIO chardev (254:0)
  131. [ 0.629265] gpiochip_setup_dev: registered GPIOs 0 to 31 on device: gpiochip0 (10000600.gpio)
  132. [ 0.637484] mt7621_gpio 10000600.gpio: registering 32 gpios
  133. [ 0.642976] gpio gpiochip1: (10000600.gpio): added GPIO chardev (254:1)
  134. [ 0.649423] gpiochip_setup_dev: registered GPIOs 32 to 63 on device: gpiochip1 (10000600.gpio)
  135. [ 0.657693] mt7621_gpio 10000600.gpio: registering 32 gpios
  136. [ 0.663240] gpio gpiochip2: (10000600.gpio): added GPIO chardev (254:2)
  137. [ 0.669652] gpiochip_setup_dev: registered GPIOs 64 to 95 on device: gpiochip2 (10000600.gpio)
  138. [ 0.678758] pinctrl core: add 1 pinctrl maps
  139. [ 0.682859] rt2880-pinmux pinctrl: found group selector 4 for i2c
  140. [ 0.688766] rt2880-pinmux pinctrl: request pin 4 (io4) for 10000900.i2c
  141. [ 0.695097] rt2880-pinmux pinctrl: request pin 5 (io5) for 10000900.i2c
  142. [ 0.701722] i2c-mt7621 10000900.i2c: clock 100 kHz
  143. [ 0.706612] Advanced Linux Sound Architecture Driver Initialized.
  144. [ 0.717537] clocksource: Switched to clocksource MIPS
  145. [ 0.729380] NET: Registered protocol family 2
  146. [ 0.734516] TCP established hash table entries: 1024 (order: 0, 4096 bytes)
  147. [ 0.741264] TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
  148. [ 0.747360] TCP: Hash tables configured (established 1024 bind 1024)
  149. [ 0.753642] UDP hash table entries: 256 (order: 0, 4096 bytes)
  150. [ 0.759275] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
  151. [ 0.765565] NET: Registered protocol family 1
  152. [ 0.769770] PCI: CLS 0 bytes, default 32
  153. [ 0.788348] alarmtimer alarmtimer: no of_node; not parsing pinctrl DT
  154. [ 0.794865] Crashlog allocated RAM at address 0x3f00000
  155. [ 0.801539] workingset: timestamp_bits=30 max_order=15 bucket_order=0
  156. [ 0.813839] squashfs: version 4.0 (2009/01/31) Phillip Lougher
  157. [ 0.819459] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
  158. [ 0.839467] io scheduler noop registered
  159. [ 0.843199] io scheduler deadline registered (default)
  160. [ 0.849245] Serial: 8250/16550 driver, 3 ports, IRQ sharing disabled
  161. [ 0.855913] serial8250 serial8250: no of_node; not parsing pinctrl DT
  162. [ 0.862477] pinctrl core: add 1 pinctrl maps
  163. [ 0.866581] rt2880-pinmux pinctrl: found group selector 10 for uart0
  164. [ 0.872727] rt2880-pinmux pinctrl: request pin 12 (io12) for 10000c00.uartlite
  165. [ 0.879661] rt2880-pinmux pinctrl: request pin 13 (io13) for 10000c00.uartlite
  166. [ 0.886952] console [ttyS0] disabled
  167. [ 0.890431] 10000c00.uartlite: ttyS0 at MMIO 0x10000c00 (irq = 28, base_baud = 2500000) is a 16550A
  168. [ 0.899152] console [ttyS0] enabled
  169. [ 0.906147] bootconsole [early0] disabled
  170. [ 0.914582] pinctrl core: add 1 pinctrl maps
  171. [ 0.918991] rt2880-pinmux pinctrl: found group selector 3 for uart1
  172. [ 0.925360] rt2880-pinmux pinctrl: request pin 45 (io45) for 10000d00.uart1
  173. [ 0.932439] rt2880-pinmux pinctrl: request pin 46 (io46) for 10000d00.uart1
  174. [ 0.939865] 10000d00.uart1: ttyS1 at MMIO 0x10000d00 (irq = 29, base_baud = 2500000) is a 16550A
  175. [ 0.949135] pinctrl core: add 1 pinctrl maps
  176. [ 0.953503] rt2880-pinmux pinctrl: found group selector 2 for uart2
  177. [ 0.959917] rt2880-pinmux pinctrl: request pin 20 (io20) for 10000e00.uart2
  178. [ 0.966981] rt2880-pinmux pinctrl: request pin 21 (io21) for 10000e00.uart2
  179. [ 0.974420] 10000e00.uart2: ttyS2 at MMIO 0x10000e00 (irq = 30, base_baud = 2500000) is a 16550A
  180. [ 0.983967] cacheinfo: Failed to find cpu0 device node
  181. [ 0.989221] cacheinfo: Unable to detect cache hierarchy for CPU 0
  182. [ 0.996073] pinctrl core: add 1 pinctrl maps
  183. [ 1.000473] pinctrl core: add 1 pinctrl maps
  184. [ 1.004838] rt2880-pinmux pinctrl: found group selector 8 for spi
  185. [ 1.011050] rt2880-pinmux pinctrl: found group selector 12 for spi cs1
  186. [ 1.017700] rt2880-pinmux pinctrl: request pin 7 (io7) for 10000b00.spi
  187. [ 1.024411] rt2880-pinmux pinctrl: request pin 8 (io8) for 10000b00.spi
  188. [ 1.031134] rt2880-pinmux pinctrl: request pin 9 (io9) for 10000b00.spi
  189. [ 1.037859] rt2880-pinmux pinctrl: request pin 10 (io10) for 10000b00.spi
  190. [ 1.044750] rt2880-pinmux pinctrl: request pin 6 (io6) for 10000b00.spi
  191. [ 1.051534] spi-mt7621 10000b00.spi: sys_freq: 193333333
  192. [ 1.062943] m25p80 spi0.0: mx25l25635e (32768 Kbytes)
  193. [ 1.068187] 5 fixed-partitions partitions found on MTD device spi0.0
  194. [ 1.074628] Creating 5 MTD partitions on "spi0.0":
  195. [ 1.079507] 0x000000000000-0x000000030000 : "u-boot"
  196. [ 1.085503] 0x000000030000-0x000000040000 : "u-boot-env"
  197. [ 1.091816] 0x000000040000-0x000000050000 : "factory"
  198. [ 1.097844] 0x000000050000-0x000001f80000 : "firmware"
  199. [ 1.184878] 2 uimage-fw partitions found on MTD device firmware
  200. [ 1.190928] 0x000000050000-0x0000001f3b92 : "kernel"
  201. [ 1.196900] 0x0000001f3b92-0x000001f80000 : "rootfs"
  202. [ 1.202798] mtd: device 5 (rootfs) set to be root filesystem
  203. [ 1.210133] 1 squashfs-split partitions found on MTD device rootfs
  204. [ 1.216425] 0x0000009b0000-0x000001f80000 : "rootfs_data"
  205. [ 1.222916] 0x000001f80000-0x000002000000 : "user"
  206. [ 1.229668] mdio_bus fixed-0: GPIO lookup for consumer reset
  207. [ 1.235421] mdio_bus fixed-0: using lookup tables for GPIO lookup
  208. [ 1.241672] mdio_bus fixed-0: lookup for GPIO reset failed
  209. [ 1.247256] libphy: Fixed MDIO Bus: probed
  210. [ 1.263189] rt3050-esw 10110000.esw: link changed 0x00
  211. [ 1.270094] mtk_soc_eth 10100000.ethernet eth0: mediatek frame engine at 0xb0100000, irq 5
  212. [ 1.278788] i2c /dev entries driver
  213. [ 1.283383] snd-soc-dummy snd-soc-dummy: no of_node; not parsing pinctrl DT
  214. [ 1.292566] NET: Registered protocol family 10
  215. [ 1.303024] Segment Routing with IPv6
  216. [ 1.306859] NET: Registered protocol family 17
  217. [ 1.311499] 8021q: 802.1Q VLAN Support v1.8
  218. [ 1.317962] ALSA device list:
  219. [ 1.320983] No soundcards found.
  220. [ 1.330268] VFS: Mounted root (squashfs filesystem) readonly on device 31:5.
  221. [ 1.338700] Freeing unused kernel memory: 220K
  222. [ 1.343206] This architecture does not have kernel memory protection.
  223. [ 2.259013] init: Console is alive
  224. [ 2.262699] init: - watchdog -
  225. [ 2.525785] random: fast init done
  226. [ 5.486687] kmodloader: loading kernel modules from /etc/modules-boot.d/*
  227. [ 5.775672] usbcore: registered new interface driver usbfs
  228. [ 5.781394] usbcore: registered new interface driver hub
  229. [ 5.786892] usbcore: registered new device driver usb
  230. [ 5.798455] exFAT: Version 1.2.9
  231. [ 5.833010] of_get_named_gpiod_flags: parsed 'gpios' property of node '/gpio-keys-polled/reset[0]' - status (0)
  232. [ 5.848746] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  233. [ 5.864969] SCSI subsystem initialized
  234. [ 5.874491] ehci-platform: EHCI generic platform driver
  235. [ 5.890194] phy phy-10120000.usbphy.0: remote usb device wakeup disabled
  236. [ 5.896998] phy phy-10120000.usbphy.0: UTMI 16bit 30MHz
  237. [ 5.902339] ehci-platform 101c0000.ehci: EHCI Host Controller
  238. [ 5.908227] ehci-platform 101c0000.ehci: new USB bus registered, assigned bus number 1
  239. [ 5.916391] ehci-platform 101c0000.ehci: irq 26, io mem 0x101c0000
  240. [ 5.947581] ehci-platform 101c0000.ehci: USB 2.0 started, EHCI 1.00
  241. [ 5.955025] hub 1-0:1.0: no of_node; not parsing pinctrl DT
  242. [ 5.960792] hub 1-0:1.0: USB hub found
  243. [ 5.965043] hub 1-0:1.0: 1 port detected
  244. [ 5.975427] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
  245. [ 5.983417] ohci-platform: OHCI generic platform driver
  246. [ 5.989092] ohci-platform 101c1000.ohci: Generic Platform OHCI controller
  247. [ 5.996030] ohci-platform 101c1000.ohci: new USB bus registered, assigned bus number 2
  248. [ 6.004181] ohci-platform 101c1000.ohci: irq 26, io mem 0x101c1000
  249. [ 6.082635] hub 2-0:1.0: no of_node; not parsing pinctrl DT
  250. [ 6.088402] hub 2-0:1.0: USB hub found
  251. [ 6.092648] hub 2-0:1.0: 1 port detected
  252. [ 6.099485] of_get_named_gpiod_flags: parsed 'gpios' property of node '/gpio-leds/system[0]' - status (0)
  253. [ 6.109281] no flags found for gpios
  254. [ 6.125544] pinctrl core: add 1 pinctrl maps
  255. [ 6.130007] rt2880-pinmux pinctrl: found group selector 9 for sdmode
  256. [ 6.136472] rt2880-pinmux pinctrl: request pin 22 (io22) for 10130000.sdhci
  257. [ 6.143552] rt2880-pinmux pinctrl: request pin 23 (io23) for 10130000.sdhci
  258. [ 6.150631] rt2880-pinmux pinctrl: request pin 24 (io24) for 10130000.sdhci
  259. [ 6.157710] rt2880-pinmux pinctrl: request pin 25 (io25) for 10130000.sdhci
  260. [ 6.164772] rt2880-pinmux pinctrl: request pin 26 (io26) for 10130000.sdhci
  261. [ 6.171849] rt2880-pinmux pinctrl: request pin 27 (io27) for 10130000.sdhci
  262. [ 6.178929] rt2880-pinmux pinctrl: request pin 28 (io28) for 10130000.sdhci
  263. [ 6.185993] rt2880-pinmux pinctrl: request pin 29 (io29) for 10130000.sdhci
  264. [ 6.193096] MTK MSDC device init.
  265. [ 6.247788] mtk-sd: MediaTek MT6575 MSDC Driver
  266. [ 6.259828] sdhci: Secure Digital Host Controller Interface driver
  267. [ 6.266104] sdhci: Copyright(c) Pierre Ossman
  268. [ 6.272160] sdhci-pltfm: SDHCI platform and OF driver helper
  269. [ 6.285876] usbcore: registered new interface driver usb-storage
  270. [ 6.295737] kmodloader: done loading kernel modules from /etc/modules-boot.d/*
  271. [ 6.313624] init: - preinit -
  272. [ 6.337451] mmc0: new high speed SDHC card at address 59b4
  273. [ 6.343358] mmcblk mmc0:59b4: no of_node; not parsing pinctrl DT
  274. [ 6.365748] mmcblk0: mmc0:59b4 USDU1 28.7 GiB
  275. [ 6.378089] mmcblk0: p1
  276. [ 7.783288] rt3050-esw 10110000.esw: link changed 0x00
  277. [ 7.983626] random: procd: uninitialized urandom read (4 bytes read)
  278. [ 10.845395] rt3050-esw 10110000.esw: link changed 0x01
  279. [ 11.233581] mount_root: loading kmods from internal overlay
  280. [ 11.300626] kmodloader: loading kernel modules from //etc/modules-boot.d/*
  281. [ 11.313978] kmodloader: done loading kernel modules from //etc/modules-boot.d/*
  282. [ 12.825885] jffs2_scan_eraseblock(): End of filesystem marker found at 0xc0000
  283. [ 12.833344] jffs2_build_filesystem(): unlocking the mtd device...
  284. [ 12.833351] done.
  285. [ 12.841583] jffs2_build_filesystem(): erasing all blocks after the end marker...
  286. [ 121.144741] done.
  287. [ 121.154343] jffs2: notice: (550) jffs2_build_xattr_subsystem: complete building xattr subsystem, 0 of xdatum (0 unchecked, 0 orphan) and 0 of xref (0 dead, 0 orphan) found.
  288. [ 121.170538] block: attempting to load /tmp/jffs_cfg/upper/etc/config/fstab
  289. [ 121.177787] block: unable to load configuration (fstab: Entry not found)
  290. [ 121.184667] block: attempting to load /tmp/jffs_cfg/etc/config/fstab
  291. [ 121.191329] block: unable to load configuration (fstab: Entry not found)
  292. [ 121.198377] block: attempting to load /etc/config/fstab
  293. [ 121.209085] block: unable to load configuration (fstab: Entry not found)
  294. [ 121.216051] block: no usable configuration
  295. [ 121.725154] jffs2: notice: (548) jffs2_build_xattr_subsystem: complete building xattr subsystem, 0 of xdatum (0 unchecked, 0 orphan) and 0 of xref (0 dead, 0 orphan) found.
  296. [ 122.788228] block: attempting to load /tmp/jffs_cfg/upper/etc/config/fstab
  297. [ 122.795352] block: unable to load configuration (fstab: Entry not found)
  298. [ 122.802326] block: attempting to load /tmp/jffs_cfg/etc/config/fstab
  299. [ 122.809116] block: unable to load configuration (fstab: Entry not found)
  300. [ 122.815997] block: attempting to load /etc/config/fstab
  301. [ 122.821499] block: unable to load configuration (fstab: Entry not found)
  302. [ 122.828432] block: no usable configuration
  303. [ 122.834084] mount_root: overlay filesystem has not been fully initialized yet
  304. [ 122.853233] mount_root: switching to jffs2 overlay
  305. [ 122.921814] overlayfs: upper fs does not support tmpfile.
  306. [ 124.557629] random: crng init done
  307. [ 156.044751] urandom-seed: Seed file not found (/etc/urandom.seed)
  308. [ 156.168979] procd: - early -
  309. [ 156.172011] procd: - watchdog -
  310. [ 156.922847] procd: - watchdog -
  311. [ 156.926334] procd: - ubus -
  312. [ 157.034577] procd: - init -
  313. [ 158.098894] kmodloader: loading kernel modules from /etc/modules.d/*
  314. [ 158.204205] RPC: Registered named UNIX socket transport module.
  315. [ 158.210279] RPC: Registered udp transport module.
  316. [ 158.215045] RPC: Registered tcp transport module.
  317. [ 158.219821] RPC: Registered tcp NFSv4.1 backchannel transport module.
  318. [ 158.228912] FAT-fs (mmcblk0p1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
  319. [ 158.249563] ntfs: driver 2.1.32 [Flags: R/O MODULE].
  320. [ 158.323917] ip6_tables: (C) 2000-2006 Netfilter Core Team
  321. [ 159.089669]
  322. [ 159.089669]
  323. [ 159.089669] === pAd = c065a000, size = 1178064 ===
  324. [ 159.089669]
  325. [ 159.100977] mt7628_init(FW(8a00), HW(8a01), CHIPID(7628))
  326. [ 159.130962] Linux video capture interface: v2.00
  327. [ 159.163027] hidraw: raw HID events driver (C) Jiri Kosina
  328. [ 159.460358] ledchain: pwm_base=0xB0005000
  329. [ 159.464574] ledchain: v2 - Device: /dev/ledchain2
  330. [ 159.469412] ledchain: - PWM channel : 2
  331. [ 159.473561] ledchain: - PWM buffer size: 12
  332. [ 159.477808] ledchain: - Number of LEDs : 1
  333. [ 159.481957] ledchain: - Inverted : 0
  334. [ 159.486105] ledchain: - LED type : WS2812
  335. [ 159.490714] ledchain: - Max retries : 3
  336. [ 159.494865] ledchain: - Max Tpassive : 10000 nS
  337. [ 159.533736] Bluetooth: Core ver 2.22
  338. [ 159.537468] NET: Registered protocol family 31
  339. [ 159.542052] Bluetooth: HCI device and connection manager initialized
  340. [ 159.548519] Bluetooth: HCI socket layer initialized
  341. [ 159.553475] Bluetooth: L2CAP socket layer initialized
  342. [ 159.558644] Bluetooth: SCO socket layer initialized
  343. [ 159.566448] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
  344. [ 159.571913] Bluetooth: BNEP filters: protocol multicast
  345. [ 159.577222] Bluetooth: BNEP socket layer initialized
  346. [ 159.589167] usbcore: registered new interface driver btusb
  347. [ 159.599040] usbcore: registered new interface driver cdc_acm
  348. [ 159.604790] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
  349. [ 159.617211] Bluetooth: HCI UART driver ver 2.3
  350. [ 159.621805] Bluetooth: HCI UART protocol H4 registered
  351. [ 159.627014] Bluetooth: HCI UART protocol BCSP registered
  352. [ 159.636685] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
  353. [ 159.642781] Bluetooth: HIDP socket layer initialized
  354. [ 159.653480] ip_tables: (C) 2000-2006 Netfilter Core Team
  355. [ 159.678562] nf_conntrack version 0.5.0 (2048 buckets, 8192 max)
  356. [ 159.770184] pinctrl core: add 1 pinctrl maps
  357. [ 159.774538] pinctrl core: add 1 pinctrl maps
  358. [ 159.778980] rt2880-pinmux pinctrl: found group selector 1 for pwm0
  359. [ 159.785253] rt2880-pinmux pinctrl: found group selector 0 for pwm1
  360. [ 159.791548] rt2880-pinmux pinctrl: request pin 18 (io18) for 10005000.pwm
  361. [ 159.798451] rt2880-pinmux pinctrl: pin io18 already requested by pinctrl; cannot claim for 10005000.pwm
  362. [ 159.807988] rt2880-pinmux pinctrl: pin-18 (10005000.pwm) status -22
  363. [ 159.814351] rt2880-pinmux pinctrl: could not request pin 18 (io18) from group pwm0 on device rt2880-pinmux
  364. [ 159.824239] mtk-pwm 10005000.pwm: Error applying setting, reverse things back
  365. [ 159.839752] Bluetooth: RFCOMM TTY layer initialized
  366. [ 159.844729] Bluetooth: RFCOMM socket layer initialized
  367. [ 159.850026] Bluetooth: RFCOMM ver 1.11
  368. [ 159.869841] usbcore: registered new interface driver ums-alauda
  369. [ 159.878798] usbcore: registered new interface driver ums-cypress
  370. [ 159.887970] usbcore: registered new interface driver ums-datafab
  371. [ 159.896846] usbcore: registered new interface driver ums-freecom
  372. [ 159.905937] usbcore: registered new interface driver ums-isd200
  373. [ 159.915096] usbcore: registered new interface driver ums-jumpshot
  374. [ 159.924175] usbcore: registered new interface driver ums-karma
  375. [ 159.933873] usbcore: registered new interface driver ums-sddr09
  376. [ 159.942962] usbcore: registered new interface driver ums-sddr55
  377. [ 159.952420] usbcore: registered new interface driver ums-usbat
  378. [ 159.965009] usbcore: registered new interface driver usbhid
  379. [ 159.970738] usbhid: USB HID core driver
  380. [ 159.978649] usbcore: registered new interface driver usblp
  381. [ 159.993025] usbcore: registered new interface driver usbserial
  382. [ 159.999130] usbcore: registered new interface driver usbserial_generic
  383. [ 160.005840] usbserial: USB Serial support registered for generic
  384. [ 160.024042] Driver for 1-wire Dallas network protocol.
  385. [ 160.053214] xt_time: kernel timezone is -0000
  386. [ 160.060076] usbcore: registered new interface driver ch341
  387. [ 160.065739] usbserial: USB Serial support registered for ch341-uart
  388. [ 160.075184] usbcore: registered new interface driver cp210x
  389. [ 160.081031] usbserial: USB Serial support registered for cp210x
  390. [ 160.091052] usbcore: registered new interface driver ftdi_sio
  391. [ 160.097003] usbserial: USB Serial support registered for FTDI USB Serial Device
  392. [ 160.118211] usbcore: registered new interface driver pl2303
  393. [ 160.123972] usbserial: USB Serial support registered for pl2303
  394. [ 160.135599] PPP generic driver version 2.4.2
  395. [ 160.143323] NET: Registered protocol family 24
  396. [ 160.159193] usbcore: registered new interface driver snd-usb-audio
  397. [ 160.180842] usbcore: registered new interface driver uvcvideo
  398. [ 160.186679] USB Video Class driver (1.1.1)
  399. [ 160.197963] usbcore: registered new interface driver option
  400. [ 160.203725] usbserial: USB Serial support registered for GSM modem (1-port)
  401. [ 160.216386] kmodloader: done loading kernel modules from /etc/modules.d/*
  402. [ 170.701366] jffs2: notice: (1415) jffs2_build_xattr_subsystem: complete building xattr subsystem, 0 of xdatum (0 unchecked, 0 orphan) and 0 of xref (0 dead, 0 orphan) found.
  403. [ 174.909468] IPv6: ADDRCONF(NETDEV_UP): br-wlan: link is not ready
  404. [ 175.485613]
  405. [ 175.485613] _ _____ ___ ___ _________ ___ ____
  406. [ 175.485613] | | /| / / _ | / _ \/ _ \ / ___/ __ \/ _ \/ __/ V1.1
  407. [ 175.485613] | |/ |/ / __ |/ , _/ ___/ / /__/ /_/ / , _/ _/
  408. [ 175.485613] |__/|__/_/ |_/_/|_/_/ \___/\____/_/|_/___/
  409. [ 175.485613] Onion Enhanced MT7688 WiFi Driver
  410. [ 175.485613]
  411. [ 175.947629] DMA Scheduler Mode=0(LMAC)
  412. [ 175.951461] efuse_probe: efuse = 10000012
  413. [ 175.955581] 1. Phy Mode = 14
  414. [ 176.188515] 2. Phy Mode = 14
  415. [ 176.191507] 3. Phy Mode = 14
  416. [ 176.217068] WTBL Segment 1 info:
  417. [ 176.220505] MemBaseAddr/FID:0x28000/0
  418. [ 176.224393] EntrySize/Cnt:32/128
  419. [ 176.227857] WTBL Segment 2 info:
  420. [ 176.231213] MemBaseAddr/FID:0x40000/0
  421. [ 176.235098] EntrySize/Cnt:64/128
  422. [ 176.238554] WTBL Segment 3 info:
  423. [ 176.241910] MemBaseAddr/FID:0x42000/64
  424. [ 176.245883] EntrySize/Cnt:64/128
  425. [ 176.249342] WTBL Segment 4 info:
  426. [ 176.252698] MemBaseAddr/FID:0x44000/128
  427. [ 176.256758] EntrySize/Cnt:32/128
  428. [ 189.329154] br-wlan: port 1(ra0) entered blocking state
  429. [ 189.334469] br-wlan: port 1(ra0) entered disabled state
  430. [ 189.340222] device ra0 entered promiscuous mode
  431. [ 189.345141] br-wlan: port 1(ra0) entered blocking state
  432. [ 189.350497] br-wlan: port 1(ra0) entered forwarding state
  433. [ 189.356685] IPv6: ADDRCONF(NETDEV_CHANGE): br-wlan: link becomes ready
  434. [ 195.820159] device ra0 left promiscuous mode
  435. [ 195.824633] br-wlan: port 1(ra0) entered disabled state
  436. [ 196.375973] IPv6: ADDRCONF(NETDEV_UP): br-wlan: link is not ready
  437. [ 198.490797] br-wlan: port 1(ra0) entered blocking state
  438. [ 198.496113] br-wlan: port 1(ra0) entered disabled state
  439. [ 198.501861] device ra0 entered promiscuous mode
  440. [ 198.506625] br-wlan: port 1(ra0) entered blocking state
  441. [ 198.511978] br-wlan: port 1(ra0) entered forwarding state
  442. [ 198.518306] IPv6: ADDRCONF(NETDEV_CHANGE): br-wlan: link becomes ready
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement
Public Pastes
Advertisement
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!