API tools faq
paste
Guest User

imx8

a guest
Aug 28th, 2023
53
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 55.18 KB | None | 0 0
raw download clone embed print report
  1. U-Boot SPL 2023.04-lf_v2023.04+gaf7d004eaf (Jun 06 2023 - 14:59:40 +0000)
  2. Normal Boot
  3. Trying to boot from MMC2_2
  4. Primary set selected
  5. Load image from MMC/SD 0x7bc00
  6.  
  7.  
  8. U-Boot 2023.04-lf_v2023.04+gaf7d004eaf (Jun 06 2023 - 14:59:40 +0000)
  9.  
  10. CPU: NXP i.MX8QM RevB A53 at 1200 MHz at 32C
  11.  
  12. Model: NXP i.MX8QM MEK
  13. Board: iMX8QM MEK
  14. Boot: SD1
  15. DRAM: 5.8 GiB
  16. TCPC: Vendor ID [0x1fc9], Product ID [0x5110], Addr [I2C0 0x51]
  17. Core: 188 devices, 32 uclasses, devicetree: separate
  18. MMC: FSL_SDHC: 0, FSL_SDHC: 1
  19. Loading Environment from MMC... *** Warning - bad CRC, using default environment
  20.  
  21. [*]-Video Link 0it6263_i2c_reg_read, read err 3
  22. faill to read from it6263 revision, ret 3
  23. (1280 x 720)
  24. [0] dpu@56180000, video
  25. [1] lvds-channel@0, display
  26. [2] lvds-to-hdmi-bridge@4c, video_bridge
  27. In: serial
  28. Out: serial
  29. Err: serial
  30.  
  31. BuildInfo:
  32. - SCFW 6638c032, SECO-FW c9de51c0, IMX-MKIMAGE 5cfd2180, ATF e4b2dbf
  33. - U-Boot 2023.04-lf_v2023.04+gaf7d004eaf
  34.  
  35. switch to partitions #0, OK
  36. mmc1 is current device
  37. flash target is MMC:1
  38. Net: eth0: ethernet@5b040000 [PRIME]Could not get PHY for FEC1: addr 1
  39.  
  40. Fastboot: Normal
  41. Normal Boot
  42. Hit any key to stop autoboot: 0
  43. switch to partitions #0, OK
  44. mmc1 is current device
  45. Failed to load 'boot.scr'
  46. 32121344 bytes read in 348 ms (88 MiB/s)
  47. Booting from mmc ...
  48. 106496 bytes read in 3 ms (33.9 MiB/s)
  49. Loading hdp firmware from 0x000000009c000000 offset 0x0000000000002000
  50. Loading hdp firmware Complete
  51. 175386 bytes read in 3 ms (55.8 MiB/s)
  52. ## Flattened Device Tree blob at 83000000
  53. Booting using the fdt blob at 0x83000000
  54. Working FDT set to 83000000
  55. Using Device Tree in place at 0000000083000000, end 000000008302dd19
  56. Working FDT set to 83000000
  57. Disable pwm@5a190000 rsrc 188 not owned
  58. Disable clock-controller@5a590000 rsrc 188 not owned
  59. Disable jr@40000 rsrc 502 not owned
  60. Disable mu@31580000 rsrc 505 not owned
  61.  
  62. Starting kernel ...
  63.  
  64. [ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd034]
  65. [ 0.000000] Linux version 6.1.22+g66e442bc7fdc (oe-user@oe-host) (aarch64-poky-linux-gcc (GCC) 12.2.0, GNU ld (GNU Binutils) 2.40.20230119) #1 SMP PREEMPT Mon Jun 12 12:31:27 UTC 2023
  66. [ 0.000000] Machine model: Freescale i.MX8QM MEK
  67. [ 0.000000] efi: UEFI not found.
  68. [ 0.000000] Reserved memory: created CMA memory pool at 0x00000000c0000000, size 960 MiB
  69. [ 0.000000] OF: reserved mem: initialized node linux,cma, compatible id shared-dma-pool
  70. [ 0.000000] Reserved memory: created DMA memory pool at 0x0000000090400000, size 1 MiB
  71. [ 0.000000] OF: reserved mem: initialized node vdevbuffer, compatible id shared-dma-pool
  72. [ 0.000000] Reserved memory: created DMA memory pool at 0x0000000094300000, size 1 MiB
  73. [ 0.000000] OF: reserved mem: initialized node vdev0buffer@94300000, compatible id shared-dma-pool
  74. [ 0.000000] earlycon: lpuart32 at MMIO32 0x000000005a060000 (options '')
  75. [ 0.000000] printk: bootconsole [lpuart32] enabled
  76. [ 0.000000] NUMA: No NUMA configuration found
  77. [ 0.000000] NUMA: Faking a node at [mem 0x0000000080200000-0x000000097fffffff]
  78. [ 0.000000] NUMA: NODE_DATA [mem 0x97f43b700-0x97f43dfff]
  79. [ 0.000000] Zone ranges:
  80. [ 0.000000] DMA [mem 0x0000000080200000-0x00000000ffffffff]
  81. [ 0.000000] DMA32 empty
  82. [ 0.000000] Normal [mem 0x0000000100000000-0x000000097fffffff]
  83. [ 0.000000] Movable zone start for each node
  84. [ 0.000000] Early memory node ranges
  85. [ 0.000000] node 0: [mem 0x0000000080200000-0x0000000083ffffff]
  86. [ 0.000000] node 0: [mem 0x0000000084000000-0x00000000863fffff]
  87. [ 0.000000] node 0: [mem 0x0000000086400000-0x0000000087ffffff]
  88. [ 0.000000] node 0: [mem 0x0000000092000000-0x00000000920fffff]
  89. [ 0.000000] node 0: [mem 0x0000000092100000-0x00000000923fffff]
  90. [ 0.000000] node 0: [mem 0x0000000092400000-0x00000000951fffff]
  91. [ 0.000000] node 0: [mem 0x0000000095200000-0x00000000fdffffff]
  92. [ 0.000000] node 0: [mem 0x0000000880000000-0x000000088fffffff]
  93. [ 0.000000] node 0: [mem 0x0000000890000000-0x000000097fffffff]
  94. [ 0.000000] Initmem setup node 0 [mem 0x0000000080200000-0x000000097fffffff]
  95. [ 0.000000] On node 0, zone DMA: 512 pages in unavailable ranges
  96. [ 0.000000] On node 0, zone DMA: 8192 pages in unavailable ranges
  97. [ 0.000000] On node 0, zone Normal: 8192 pages in unavailable ranges
  98. [ 0.000000] psci: probing for conduit method from DT.
  99. [ 0.000000] psci: PSCIv1.1 detected in firmware.
  100. [ 0.000000] psci: Using standard PSCI v0.2 function IDs
  101. [ 0.000000] psci: Trusted OS migration not required
  102. [ 0.000000] psci: SMC Calling Convention v1.2
  103. [ 0.000000] percpu: Embedded 20 pages/cpu s44520 r8192 d29208 u81920
  104. [ 0.000000] Detected VIPT I-cache on CPU0
  105. [ 0.000000] CPU features: detected: GIC system register CPU interface
  106. [ 0.000000] CPU features: detected: ARM erratum 845719
  107. [ 0.000000] alternatives: applying boot alternatives
  108. [ 0.000000] Fallback order for Node 0: 0
  109. [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 1499400
  110. [ 0.000000] Policy zone: Normal
  111. [ 0.000000] Kernel command line: console=ttyLP0,115200 earlycon root=/dev/mmcblk1p2 rootwait rw cpufreq.default_governor=SCHEDUTIL
  112. [ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear)
  113. [ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear)
  114. [ 0.000000] mem auto-init: stack:all(zero), heap alloc:off, heap free:off
  115. [ 0.000000] software IO TLB: area num 8.
  116. [ 0.000000] software IO TLB: mapped [mem 0x00000000bc000000-0x00000000c0000000] (64MB)
  117. [ 0.000000] Memory: 4543008K/6092800K available (19584K kernel code, 1608K rwdata, 6708K rodata, 3328K init, 644K bss, 566752K reserved, 983040K cma-reserved)
  118. [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1
  119. [ 0.000000] rcu: Preemptible hierarchical RCU implementation.
  120. [ 0.000000] rcu: RCU event tracing is enabled.
  121. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=6.
  122. [ 0.000000] Trampoline variant of Tasks RCU enabled.
  123. [ 0.000000] Tracing variant of Tasks RCU enabled.
  124. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
  125. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=6
  126. [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
  127. [ 0.000000] GICv3: GIC: Using split EOI/Deactivate mode
  128. [ 0.000000] GICv3: 512 SPIs implemented
  129. [ 0.000000] GICv3: 0 Extended SPIs implemented
  130. [ 0.000000] Root IRQ handler: gic_handle_irq
  131. [ 0.000000] GICv3: GICv3 features: 16 PPIs
  132. [ 0.000000] GICv3: CPU0: found redistributor 0 region 0:0x0000000051b00000
  133. [ 0.000000] ITS: No ITS available, not enabling LPIs
  134. [ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention.
  135. [ 0.000000] arch_timer: cp15 timer(s) running at 8.00MHz (phys).
  136. [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x1d854df40, max_idle_ns: 440795202120 ns
  137. [ 0.000001] sched_clock: 56 bits at 8MHz, resolution 125ns, wraps every 2199023255500ns
  138. [ 0.008879] Console: colour dummy device 80x25
  139. [ 0.013068] Calibrating delay loop (skipped), value calculated using timer frequency.. 16.00 BogoMIPS (lpj=32000)
  140. [ 0.023243] pid_max: default: 32768 minimum: 301
  141. [ 0.027902] LSM: Security Framework initializing
  142. [ 0.032562] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear)
  143. [ 0.040034] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear)
  144. [ 0.049624] cblist_init_generic: Setting adjustable number of callback queues.
  145. [ 0.056538] cblist_init_generic: Setting shift to 3 and lim to 1.
  146. [ 0.062656] cblist_init_generic: Setting shift to 3 and lim to 1.
  147. [ 0.068839] rcu: Hierarchical SRCU implementation.
  148. [ 0.073459] rcu: Max phase no-delay instances is 1000.
  149. [ 0.081488] EFI services will not be available.
  150. [ 0.085960] smp: Bringing up secondary CPUs ...
  151. [ 0.091384] Detected VIPT I-cache on CPU1
  152. [ 0.091476] GICv3: CPU1: found redistributor 1 region 0:0x0000000051b20000
  153. [ 0.091523] CPU1: Booted secondary processor 0x0000000001 [0x410fd034]
  154. [ 0.092717] Detected VIPT I-cache on CPU2
  155. [ 0.092780] GICv3: CPU2: found redistributor 2 region 0:0x0000000051b40000
  156. [ 0.092803] CPU2: Booted secondary processor 0x0000000002 [0x410fd034]
  157. [ 0.093931] Detected VIPT I-cache on CPU3
  158. [ 0.093994] GICv3: CPU3: found redistributor 3 region 0:0x0000000051b60000
  159. [ 0.094013] CPU3: Booted secondary processor 0x0000000003 [0x410fd034]
  160. [ 0.096414] CPU features: detected: Spectre-v2
  161. [ 0.096421] CPU features: detected: Spectre-v3a
  162. [ 0.096425] CPU features: detected: Spectre-BHB
  163. [ 0.096430] CPU features: detected: ARM erratum 1742098
  164. [ 0.096433] CPU features: detected: ARM errata 1165522, 1319367, or 1530923
  165. [ 0.096436] Detected PIPT I-cache on CPU4
  166. [ 0.096502] GICv3: CPU4: found redistributor 100 region 0:0x0000000051b80000
  167. [ 0.096524] CPU4: Booted secondary processor 0x0000000100 [0x410fd082]
  168. [ 0.097678] Detected PIPT I-cache on CPU5
  169. [ 0.097723] GICv3: CPU5: found redistributor 101 region 0:0x0000000051ba0000
  170. [ 0.097737] CPU5: Booted secondary processor 0x0000000101 [0x410fd082]
  171. [ 0.097793] smp: Brought up 1 node, 6 CPUs
  172. [ 0.214412] SMP: Total of 6 processors activated.
  173. [ 0.219095] CPU features: detected: 32-bit EL0 Support
  174. [ 0.224229] CPU features: detected: 32-bit EL1 Support
  175. [ 0.229343] CPU features: detected: CRC32 instructions
  176. [ 0.234545] CPU: All CPU(s) started at EL2
  177. [ 0.238569] alternatives: applying system-wide alternatives
  178. [ 0.246003] devtmpfs: initialized
  179. [ 0.268945] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
  180. [ 0.278389] futex hash table entries: 2048 (order: 5, 131072 bytes, linear)
  181. [ 0.312584] pinctrl core: initialized pinctrl subsystem
  182. [ 0.322222] DMI not present or invalid.
  183. [ 0.326321] NET: Registered PF_NETLINK/PF_ROUTE protocol family
  184. [ 0.333102] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations
  185. [ 0.340326] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
  186. [ 0.348292] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
  187. [ 0.355996] audit: initializing netlink subsys (disabled)
  188. [ 0.361458] audit: type=2000 audit(0.240:1): state=initialized audit_enabled=0 res=1
  189. [ 0.361952] thermal_sys: Registered thermal governor 'step_wise'
  190. [ 0.369084] thermal_sys: Registered thermal governor 'power_allocator'
  191. [ 0.375102] cpuidle: using governor menu
  192. [ 0.385692] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
  193. [ 0.392371] ASID allocator initialised with 65536 entries
  194. [ 0.399782] Serial: AMBA PL011 UART driver
  195. [ 0.403593] imx mu driver is registered.
  196. [ 0.407457] imx rpmsg driver is registered.
  197. [ 0.427862] platform 58227000.csi: Fixed dependency cycle(s) with /bus@58000000/i2c@58226000/max9286_mipi@6a
  198. [ 0.437682] platform 58247000.csi: Fixed dependency cycle(s) with /bus@58000000/i2c@58246000/max9286_mipi@6a
  199. [ 0.484897] platform 56180000.dpu: Fixed dependency cycle(s) with /bus@56240000/ldb@562410e0
  200. [ 0.493067] platform bus@56240000:ldb@562410e0: Fixed dependency cycle(s) with /bus@56240000/i2c@56247000/lvds-to-hdmi-bridge@4c
  201. [ 0.506807] platform 57180000.dpu: Fixed dependency cycle(s) with /bus@57240000/ldb@572410e0
  202. [ 0.514952] platform bus@57240000:ldb@572410e0: Fixed dependency cycle(s) with /bus@57240000/i2c@57247000/lvds-to-hdmi-bridge@4c
  203. [ 0.529667] platform 56180000.dpu: Fixed dependency cycle(s) with /bus@56220000/dsi_host@56228000
  204. [ 0.538262] platform 56228000.dsi_host: Fixed dependency cycle(s) with /bus@56220000/i2c@56226000/adv7535@3d
  205. [ 0.550812] platform 57180000.dpu: Fixed dependency cycle(s) with /bus@57220000/dsi_host@57228000
  206. [ 0.559407] platform 57228000.dsi_host: Fixed dependency cycle(s) with /bus@57220000/i2c@57226000/adv7535@3d
  207. [ 0.570162] platform cbtl04gp: Fixed dependency cycle(s) with /bus@5a000000/i2c@5a800000/tcpc@51/connector
  208. [ 0.582292] KASLR disabled due to lack of seed
  209. [ 0.603716] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages
  210. [ 0.610174] HugeTLB: 0 KiB vmemmap can be freed for a 1.00 GiB page
  211. [ 0.616466] HugeTLB: registered 32.0 MiB page size, pre-allocated 0 pages
  212. [ 0.623197] HugeTLB: 0 KiB vmemmap can be freed for a 32.0 MiB page
  213. [ 0.629452] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages
  214. [ 0.636228] HugeTLB: 0 KiB vmemmap can be freed for a 2.00 MiB page
  215. [ 0.642486] HugeTLB: registered 64.0 KiB page size, pre-allocated 0 pages
  216. [ 0.649258] HugeTLB: 0 KiB vmemmap can be freed for a 64.0 KiB page
  217. [ 0.659023] ACPI: Interpreter disabled.
  218. [ 0.664391] iommu: Default domain type: Translated
  219. [ 0.668934] iommu: DMA domain TLB invalidation policy: strict mode
  220. [ 0.675477] SCSI subsystem initialized
  221. [ 0.679258] usbcore: registered new interface driver usbfs
  222. [ 0.684438] usbcore: registered new interface driver hub
  223. [ 0.689725] usbcore: registered new device driver usb
  224. [ 0.697593] mc: Linux media interface: v0.10
  225. [ 0.701561] videodev: Linux video capture interface: v2.00
  226. [ 0.707058] pps_core: LinuxPPS API ver. 1 registered
  227. [ 0.711950] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
  228. [ 0.721080] PTP clock support registered
  229. [ 0.725315] EDAC MC: Ver: 3.0.0
  230. [ 0.730053] FPGA manager framework
  231. [ 0.733190] Advanced Linux Sound Architecture Driver Initialized.
  232. [ 0.739758] Bluetooth: Core ver 2.22
  233. [ 0.743004] NET: Registered PF_BLUETOOTH protocol family
  234. [ 0.748290] Bluetooth: HCI device and connection manager initialized
  235. [ 0.754636] Bluetooth: HCI socket layer initialized
  236. [ 0.759498] Bluetooth: L2CAP socket layer initialized
  237. [ 0.764546] Bluetooth: SCO socket layer initialized
  238. [ 0.769947] vgaarb: loaded
  239. [ 0.772878] imx-scu system-controller: NXP i.MX SCU Initialized
  240. [ 0.804808] imx8qm-pinctrl system-controller:pinctrl: initialized IMX pinctrl driver
  241. [ 0.815042] clocksource: Switched to clocksource arch_sys_counter
  242. [ 0.821038] VFS: Disk quotas dquot_6.6.0
  243. [ 0.824752] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
  244. [ 0.831760] pnp: PnP ACPI: disabled
  245. [ 0.871475] NET: Registered PF_INET protocol family
  246. [ 0.876403] IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear)
  247. [ 0.888884] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear)
  248. [ 0.897134] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
  249. [ 0.904841] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear)
  250. [ 0.913165] TCP bind hash table entries: 65536 (order: 9, 2097152 bytes, linear)
  251. [ 0.921988] TCP: Hash tables configured (established 65536 bind 65536)
  252. [ 0.928392] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear)
  253. [ 0.935113] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear)
  254. [ 0.942482] NET: Registered PF_UNIX/PF_LOCAL protocol family
  255. [ 0.948248] RPC: Registered named UNIX socket transport module.
  256. [ 0.953836] RPC: Registered udp transport module.
  257. [ 0.958518] RPC: Registered tcp transport module.
  258. [ 0.963210] RPC: Registered tcp NFSv4.1 backchannel transport module.
  259. [ 0.970451] PCI: CLS 0 bytes, default 64
  260. [ 0.974807] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters available
  261. [ 0.984765] kvm [1]: IPA Size Limit: 40 bits
  262. [ 0.989961] kvm [1]: vgic-v2@52020000
  263. [ 0.993302] kvm [1]: GIC system register CPU interface enabled
  264. [ 0.999220] kvm [1]: vgic interrupt IRQ9
  265. [ 1.003141] kvm [1]: Hyp mode initialized successfully
  266. [ 1.009672] Initialise system trusted keyrings
  267. [ 1.013937] workingset: timestamp_bits=42 max_order=21 bucket_order=0
  268. [ 1.026108] squashfs: version 4.0 (2009/01/31) Phillip Lougher
  269. [ 1.032124] NFS: Registering the id_resolver key type
  270. [ 1.036868] Key type id_resolver registered
  271. [ 1.041007] Key type id_legacy registered
  272. [ 1.045076] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
  273. [ 1.051694] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering...
  274. [ 1.059092] jffs2: version 2.2. (NAND) © 2001-2006 Red Hat, Inc.
  275. [ 1.065494] 9p: Installing v9fs 9p2000 file system support
  276. [ 1.106867] Key type asymmetric registered
  277. [ 1.110620] Asymmetric key parser 'x509' registered
  278. [ 1.115549] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 243)
  279. [ 1.122897] io scheduler mq-deadline registered
  280. [ 1.127390] io scheduler kyber registered
  281. [ 1.163453] EINJ: ACPI disabled.
  282. [ 1.368122] mxs-dma 5b810000.dma-apbh: initialized
  283. [ 1.378307] Bus freq driver module loaded
  284. [ 1.391781] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
  285. [ 1.412022] printk: console [ttyLP0] enabled0x5a060010 (irq = 77, base_baud = 5000000) is a FSL_LPUART
  286. [ 1.412022] printk: console [ttyLP0] enabled
  287. [ 1.420448] printk: bootconsole [lpuart32] disabled
  288. [ 1.420448] printk: bootconsole [lpuart32] disabled
  289. [ 1.431170] 5a070000.serial: ttyLP1 at MMIO 0x5a070010 (irq = 78, base_baud = 5000000) is a FSL_LPUART
  290. [ 1.440595] serial serial0: tty port ttyLP1 registered
  291. [ 1.448063] arm-smmu 51400000.iommu: probing hardware configuration...
  292. [ 1.454607] arm-smmu 51400000.iommu: SMMUv2 with:
  293. [ 1.459319] arm-smmu 51400000.iommu: stage 1 translation
  294. [ 1.464724] arm-smmu 51400000.iommu: stage 2 translation
  295. [ 1.470133] arm-smmu 51400000.iommu: nested translation
  296. [ 1.475453] arm-smmu 51400000.iommu: stream matching with 32 register groups
  297. [ 1.482603] arm-smmu 51400000.iommu: 32 context banks (0 stage-2 only)
  298. [ 1.489232] arm-smmu 51400000.iommu: Supported page sizes: 0x61311000
  299. [ 1.495773] arm-smmu 51400000.iommu: Stage-1: 48-bit VA -> 48-bit IPA
  300. [ 1.502313] arm-smmu 51400000.iommu: Stage-2: 48-bit IPA -> 48-bit PA
  301. [ 1.509389] arm-smmu 51400000.iommu: preserved 0 boot mappings
  302. [ 1.609557] loop: module loaded
  303. [ 1.616150] megasas: 07.719.03.00-rc1
  304. [ 1.634130] tun: Universal TUN/TAP device driver, 1.6
  305. [ 1.641256] thunder_xcv, ver 1.0
  306. [ 1.644531] thunder_bgx, ver 1.0
  307. [ 1.647795] nicpf, ver 1.0
  308. [ 1.655898] hns3: Hisilicon Ethernet Network Driver for Hip08 Family - version
  309. [ 1.663135] hns3: Copyright (c) 2017 Huawei Corporation.
  310. [ 1.668507] hclge is initializing
  311. [ 1.671843] e1000: Intel(R) PRO/1000 Network Driver
  312. [ 1.676729] e1000: Copyright (c) 1999-2006 Intel Corporation.
  313. [ 1.682520] e1000e: Intel(R) PRO/1000 Network Driver
  314. [ 1.687485] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
  315. [ 1.693449] igb: Intel(R) Gigabit Ethernet Network Driver
  316. [ 1.698857] igb: Copyright (c) 2007-2014 Intel Corporation.
  317. [ 1.704467] igbvf: Intel(R) Gigabit Virtual Function Network Driver
  318. [ 1.710743] igbvf: Copyright (c) 2009 - 2012 Intel Corporation.
  319. [ 1.717098] sky2: driver version 1.30
  320. [ 1.722225] usbcore: registered new interface driver r8152
  321. [ 1.727960] VFIO - User Level meta-driver version: 0.3
  322. [ 1.738740] cdns3-imx 5b110000.usb: Adding to iommu group 0
  323. [ 1.745221] platform 5b130000.usb: Fixed dependency cycle(s) with /bus@5a000000/i2c@5a800000/tcpc@51
  324. [ 1.758475] usbcore: registered new interface driver uas
  325. [ 1.763845] usbcore: registered new interface driver usb-storage
  326. [ 1.769935] usbcore: registered new interface driver usbserial_generic
  327. [ 1.776490] usbserial: USB Serial support registered for generic
  328. [ 1.782532] usbcore: registered new interface driver ftdi_sio
  329. [ 1.788305] usbserial: USB Serial support registered for FTDI USB Serial Device
  330. [ 1.795648] usbcore: registered new interface driver usb_serial_simple
  331. [ 1.802202] usbserial: USB Serial support registered for carelink
  332. [ 1.808358] usbserial: USB Serial support registered for zio
  333. [ 1.814057] usbserial: USB Serial support registered for funsoft
  334. [ 1.820084] usbserial: USB Serial support registered for flashloader
  335. [ 1.826456] usbserial: USB Serial support registered for google
  336. [ 1.832399] usbserial: USB Serial support registered for libtransistor
  337. [ 1.838953] usbserial: USB Serial support registered for vivopay
  338. [ 1.844981] usbserial: USB Serial support registered for moto_modem
  339. [ 1.851274] usbserial: USB Serial support registered for motorola_tetra
  340. [ 1.857910] usbserial: USB Serial support registered for nokia
  341. [ 1.863761] usbserial: USB Serial support registered for novatel_gps
  342. [ 1.870136] usbserial: USB Serial support registered for hp4x
  343. [ 1.875907] usbserial: USB Serial support registered for suunto
  344. [ 1.881849] usbserial: USB Serial support registered for siemens_mpi
  345. [ 1.888249] usbcore: registered new interface driver usb_ehset_test
  346. [ 1.901871] input: system-controller:keys as /devices/platform/system-controller/system-controller:keys/input/input0
  347. [ 1.915722] imx-sc-rtc system-controller:rtc: registered as rtc0
  348. [ 1.922086] imx-sc-rtc system-controller:rtc: setting system clock to 1970-01-01T00:00:09 UTC (9)
  349. [ 1.931904] i2c_dev: i2c /dev entries driver
  350. [ 1.946260] amphion-vpu-core 2d080000.vpu-core: [0] = decoder
  351. [ 1.954369] amphion-vpu-core 2d090000.vpu-core: [1] = encoder
  352. [ 1.962343] amphion-vpu-core 2d0a0000.vpu-core: [2] = encoder
  353. [ 1.981412] Bluetooth: HCI UART driver ver 2.3
  354. [ 1.985878] Bluetooth: HCI UART protocol H4 registered
  355. [ 1.991033] Bluetooth: HCI UART protocol BCSP registered
  356. [ 1.996380] Bluetooth: HCI UART protocol LL registered
  357. [ 2.001523] Bluetooth: HCI UART protocol ATH3K registered
  358. [ 2.006946] Bluetooth: HCI UART protocol Three-wire (H5) registered
  359. [ 2.013437] Bluetooth: HCI UART protocol Broadcom registered
  360. [ 2.019128] Bluetooth: HCI UART protocol QCA registered
  361. [ 2.030175] sdhci: Secure Digital Host Controller Interface driver
  362. [ 2.036390] sdhci: Copyright(c) Pierre Ossman
  363. [ 2.042709] Synopsys Designware Multimedia Card Interface Driver
  364. [ 2.050507] sdhci-pltfm: SDHCI platform and OF driver helper
  365. [ 2.058354] sdhci-esdhc-imx 5b010000.mmc: Adding to iommu group 1
  366. [ 2.064555] ledtrig-cpu: registered to indicate activity on CPUs
  367. [ 2.073185] SMCCC: SOC_ID: ARCH_SOC_ID not implemented, skipping ....
  368. [ 2.080141] usbcore: registered new interface driver usbhid
  369. [ 2.085726] usbhid: USB HID core driver
  370. [ 2.097022] mmc0: SDHCI controller on 5b010000.mmc [5b010000.mmc] using ADMA
  371. [ 2.107051] mxc-mipi-csi2 58227000.csi: lanes: 4, name: mxc-mipi-csi2.0
  372. [ 2.131055] mxc-mipi-csi2 58247000.csi: lanes: 4, name: mxc-mipi-csi2.1
  373. [ 2.140973] mxc-isi 58100000.isi: mxc_isi.0 registered successfully
  374. [ 2.148318] mxc-isi 58110000.isi: mxc_isi.1 registered successfully
  375. [ 2.155435] mxc-isi 58120000.isi: mxc_isi.2 registered successfully
  376. [ 2.162435] mxc-isi 58130000.isi: mxc_isi.3 registered successfully
  377. [ 2.169416] mxc-isi 58140000.isi: mxc_isi.4 registered successfully
  378. [ 2.176499] mxc-isi 58150000.isi: mxc_isi.5 registered successfully
  379. [ 2.179361] mmc0: new HS400 Enhanced strobe MMC card at address 0001
  380. [ 2.189795] mxc-isi 58160000.isi: mxc_isi.6 registered successfully
  381. [ 2.189800] mmcblk0: mmc0:0001 S0J57X 29.6 GiB
  382. [ 2.201356] mxc-isi 58170000.isi: mxc_isi.7 registered successfully
  383. [ 2.202318] mmcblk0: p1 p2
  384. [ 2.211120] mmcblk0boot0: mmc0:0001 S0J57X 31.5 MiB
  385. [ 2.217453] mmcblk0boot1: mmc0:0001 S0J57X 31.5 MiB
  386. [ 2.223551] mmcblk0rpmb: mmc0:0001 S0J57X 4.00 MiB, chardev (234:0)
  387. [ 2.227897] cs_system_cfg: CoreSight Configuration manager initialised
  388. [ 2.239611] optee: probing for conduit method.
  389. [ 2.244088] optee: revision 3.21 (1962aec9)
  390. [ 2.244882] optee: dynamic shared memory is enabled
  391. [ 2.254350] optee: initialized driver
  392. [ 2.264456] Galcore version 6.4.11.p1.658245
  393. [ 2.281127] [drm] Initialized vivante 1.0.0 20170808 for 80000000.imx8_gpu1_ss on minor 0
  394. [ 2.291655] mxc_emvsim 5a0d0000.sim0: emvsim register success
  395. [ 2.303955] NET: Registered PF_LLC protocol family
  396. [ 2.309500] NET: Registered PF_INET6 protocol family
  397. [ 2.315276] Segment Routing with IPv6
  398. [ 2.318957] In-situ OAM (IOAM) with IPv6
  399. [ 2.322968] NET: Registered PF_PACKET protocol family
  400. [ 2.328103] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
  401. [ 2.341161] Bluetooth: RFCOMM TTY layer initialized
  402. [ 2.346071] Bluetooth: RFCOMM socket layer initialized
  403. [ 2.351258] Bluetooth: RFCOMM ver 1.11
  404. [ 2.355019] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
  405. [ 2.360343] Bluetooth: BNEP filters: protocol multicast
  406. [ 2.365577] Bluetooth: BNEP socket layer initialized
  407. [ 2.370552] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
  408. [ 2.376487] Bluetooth: HIDP socket layer initialized
  409. [ 2.381601] 8021q: 802.1Q VLAN Support v1.8
  410. [ 2.385811] lib80211: common routines for IEEE802.11 drivers
  411. [ 2.391577] 9pnet: Installing 9P2000 support
  412. [ 2.395955] Key type dns_resolver registered
  413. [ 2.400677] registered taskstats version 1
  414. [ 2.404805] Loading compiled-in X.509 certificates
  415. [ 2.441831] mxs_phy 5b100000.usbphy: supply phy-3p0 not found, using dummy regulator
  416. [ 2.461188] imx-lpi2c 58226000.i2c: use pio mode
  417. [ 2.475200] max9286_mipi 2-006a: max9286_read_reg:read reg error: reg=1e
  418. [ 2.481917] max9286 is not found, chip id reg 0x1e = 0x(ffffffff)
  419. [ 2.488052] i2c i2c-2: LPI2C adapter registered
  420. [ 2.493127] imx-lpi2c 58246000.i2c: use pio mode
  421. [ 2.507199] max9286_mipi 3-006a: max9286_read_reg:read reg error: reg=1e
  422. [ 2.513914] max9286 is not found, chip id reg 0x1e = 0x(ffffffff)
  423. [ 2.520044] i2c i2c-3: LPI2C adapter registered
  424. [ 2.525154] imx-lpi2c 5a800000.i2c: use pio mode
  425. [ 2.530192] isl29018 4-0044: supply vcc not found, using dummy regulator
  426. [ 2.536985] isl29018 4-0044: No cache defaults, reading back from HW
  427. [ 2.560659] i2c i2c-4: supply vdd not found, using dummy regulator
  428. [ 2.566915] i2c i2c-4: supply vddio not found, using dummy regulator
  429. [ 2.607302] max732x 4-0068: failed reading
  430. [ 2.611620] max732x: probe of 4-0068 failed with error -5
  431. [ 2.677236] i2c i2c-4: LPI2C adapter registered
  432. [ 2.683293] gpio-430 (scl): enforced open drain please flag it properly in DT/ACPI DSDT/board file
  433. [ 2.692310] imx-lpi2c 5a810000.i2c: using scl,sda for recovery
  434. [ 2.698158] imx-lpi2c 5a810000.i2c: use pio mode
  435. [ 2.703227] i2c i2c-5: LPI2C adapter registered
  436. [ 2.710431] imx8qm-ldb bus@56240000:ldb@562410e0: Failed to create device link (0x180) with 56241000.ldb_phy
  437. [ 2.720721] imx8qm-ldb bus@57240000:ldb@572410e0: Failed to create device link (0x180) with 57241000.ldb_phy
  438. [ 2.733171] pwm-backlight lvds_backlight@0: supply power not found, using dummy regulator
  439. [ 2.742960] pwm-backlight lvds_backlight@1: supply power not found, using dummy regulator
  440. [ 2.761756] dpu-core 56180000.dpu: driver probed
  441. [ 2.769226] imx-drm display-subsystem: bound imx-drm-dpu-bliteng.2 (ops dpu_bliteng_ops)
  442. [ 2.777573] imx-drm display-subsystem: bound imx-drm-dpu-bliteng.5 (ops dpu_bliteng_ops)
  443. [ 2.786106] imx-drm display-subsystem: bound imx-dpu-crtc.0 (ops dpu_crtc_ops)
  444. [ 2.793691] imx-drm display-subsystem: bound imx-dpu-crtc.1 (ops dpu_crtc_ops)
  445. [ 2.801254] imx-drm display-subsystem: bound imx-dpu-crtc.3 (ops dpu_crtc_ops)
  446. [ 2.808769] imx-drm display-subsystem: bound imx-dpu-crtc.4 (ops dpu_crtc_ops)
  447. [ 2.816111] [drm:drm_bridge_attach] *ERROR* failed to attach bridge /bus@56220000/dsi_host@56228000 to encoder DSI-147: -517
  448. [ 2.828049] dpu-core 57180000.dpu: driver probed
  449. [ 2.835215] fec 5b040000.ethernet: Adding to iommu group 2
  450. [ 2.841511] pps pps0: new PPS source ptp0
  451. [ 2.847988] mdio_bus 5b040000.ethernet-1: MDIO device at address 1 is missing.
  452. [ 2.855662] fec 5b040000.ethernet eth0: registered PHC device 0
  453. [ 2.862380] cdns-usb3 5b130000.usb: Adding to iommu group 0
  454. [ 2.939050] sdhci-esdhc-imx 5b020000.mmc: Adding to iommu group 1
  455. [ 2.945642] remoteproc remoteproc0: imx-rproc is available
  456. [ 2.946034] sdhci-esdhc-imx 5b020000.mmc: Got CD GPIO
  457. [ 2.951207] remoteproc remoteproc0: attaching to imx-rproc
  458. [ 2.956247] sdhci-esdhc-imx 5b020000.mmc: Got WP GPIO
  459. [ 2.962428] rproc-virtio rproc-virtio.1.auto: assigned reserved memory node vdevbuffer
  460. [ 2.975165] virtio_rpmsg_bus virtio0: rpmsg host is online
  461. [ 2.980685] rproc-virtio rproc-virtio.1.auto: registered virtio0 (type 7)
  462. [ 2.987529] rproc-virtio rproc-virtio.2.auto: assigned reserved memory node vdevbuffer
  463. [ 2.995957] virtio_rpmsg_bus virtio1: rpmsg host is online
  464. [ 2.998641] mmc1: SDHCI controller on 5b020000.mmc [5b020000.mmc] using ADMA
  465. [ 3.001472] rproc-virtio rproc-virtio.2.auto: registered virtio1 (type 7)
  466. [ 3.001478] remoteproc remoteproc0: remote processor imx-rproc is now attached
  467. [ 3.022764] remoteproc remoteproc1: imx-rproc is available
  468. [ 3.028314] remoteproc remoteproc1: attaching to imx-rproc
  469. [ 3.034394] rproc-virtio rproc-virtio.3.auto: assigned reserved memory node vdevbuffer
  470. [ 3.042763] virtio_rpmsg_bus virtio2: rpmsg host is online
  471. [ 3.045543] virtio_rpmsg_bus virtio2: creating channel rpmsg-i2c-channel addr 0x1
  472. [ 3.048285] rproc-virtio rproc-virtio.3.auto: registered virtio2 (type 7)
  473. [ 3.056004] i2c-rpmsg virtio2.rpmsg-i2c-channel.-1.1: new channel: 0x400 -> 0x1!
  474. [ 3.062580] rproc-virtio rproc-virtio.4.auto: assigned reserved memory node vdevbuffer
  475. [ 3.070051] virtio_rpmsg_bus virtio3: rpmsg host is online
  476. [ 3.070066] rproc-virtio rproc-virtio.4.auto: registered virtio3 (type 7)
  477. [ 3.090316] remoteproc remoteproc1: remote processor imx-rproc is now attached
  478. [ 3.106138] virtio_rpmsg_bus virtio1: creating channel rpmsg-openamp-demo-channel addr 0x1e
  479. [ 3.117940] imx-lpi2c 56247000.i2c: use pio mode
  480. [ 3.123384] it6263 6-004c: Probe failed. Remote port 'lvds-channel@0' disabled
  481. [ 3.130857] i2c i2c-6: LPI2C adapter registered
  482. [ 3.135991] imx-lpi2c 57247000.i2c: use pio mode
  483. [ 3.141399] it6263 7-004c: Probe failed. Remote port 'lvds-channel@0' disabled
  484. [ 3.148765] i2c i2c-7: LPI2C adapter registered
  485. [ 3.153915] imx-lpi2c 56226000.i2c: use pio mode
  486. [ 3.158954] adv7511 8-003d: supply avdd not found, using dummy regulator
  487. [ 3.165753] adv7511 8-003d: supply dvdd not found, using dummy regulator
  488. [ 3.172498] adv7511 8-003d: supply pvdd not found, using dummy regulator
  489. [ 3.179250] adv7511 8-003d: supply a2vdd not found, using dummy regulator
  490. [ 3.186084] adv7511 8-003d: supply v3p3 not found, using dummy regulator
  491. [ 3.192817] adv7511 8-003d: supply v1p2 not found, using dummy regulator
  492. [ 3.199909] adv7511 8-003d: Probe failed. Remote port 'dsi_host@56228000' disabled
  493. [ 3.207593] i2c i2c-8: LPI2C adapter registered
  494. [ 3.212945] imx-lpi2c 57226000.i2c: use pio mode
  495. [ 3.217932] adv7511 9-003d: supply avdd not found, using dummy regulator
  496. [ 3.224725] adv7511 9-003d: supply dvdd not found, using dummy regulator
  497. [ 3.226409] mmc1: new ultra high speed SDR104 SDHC card at address aaaa
  498. [ 3.231457] adv7511 9-003d: supply pvdd not found, using dummy regulator
  499. [ 3.238848] mmcblk1: mmc1:aaaa SB16G 14.8 GiB
  500. [ 3.244794] adv7511 9-003d: supply a2vdd not found, using dummy regulator
  501. [ 3.254576] mmcblk1: p1 p2
  502. [ 3.256050] adv7511 9-003d: supply v3p3 not found, using dummy regulator
  503. [ 3.265553] adv7511 9-003d: supply v1p2 not found, using dummy regulator
  504. [ 3.272712] adv7511 9-003d: Probe failed. Remote port 'dsi_host@57228000' disabled
  505. [ 3.280402] i2c i2c-9: LPI2C adapter registered
  506. [ 3.285420] pca953x 1-0020: supply vcc not found, using dummy regulator
  507. [ 3.292102] pca953x 1-0020: using no AI
  508. [ 3.296067] pca953x 1-0020: failed writing register
  509. [ 3.301020] pca953x: probe of 1-0020 failed with error -1
  510. [ 3.331152] cs42xx8 1-0048: failed to get device ID, ret = -1
  511. [ 3.337164] cs42xx8: probe of 1-0048 failed with error -1
  512. [ 3.342644] imx_rpmsg_i2c bus@5a000000:i2c-rpbus-1: add I2C adapter i2c-rpmsg-adapter successfully
  513. [ 3.352188] imx8q-pcie-phy 5f1a0000.pcie-phy: phy impedance ratio is not specified.
  514. [ 3.360458] imx8q-pcie-phy 5f180000.pcie-phy: phy impedance ratio is not specified.
  515. [ 3.368519] imx8q-pcie-phy 5f190000.pcie-phy: phy impedance ratio is not specified.
  516. [ 3.378844] imx6q-pcie 5f010000.pcie: host bridge /bus@5f000000/pcie@5f010000 ranges:
  517. [ 3.379248] imx-drm display-subsystem: bound imx-drm-dpu-bliteng.2 (ops dpu_bliteng_ops)
  518. [ 3.379268] imx6q-pcie 5f000000.pcie: host bridge /bus@5f000000/pcie@5f000000 ranges:
  519. [ 3.379300] imx6q-pcie 5f000000.pcie: IO 0x006ff80000..0x006ff8ffff -> 0x0000000000
  520. [ 3.379323] imx6q-pcie 5f000000.pcie: MEM 0x0060000000..0x006fefffff -> 0x0060000000
  521. [ 3.382645] imx8q-pcie-phy 5f180000.pcie-phy: PHY PLL is locked
  522. [ 3.386730] imx6q-pcie 5f010000.pcie: IO 0x007ff80000..0x007ff8ffff -> 0x0000000000
  523. [ 3.394907] imx-drm display-subsystem: bound imx-drm-dpu-bliteng.5 (ops dpu_bliteng_ops)
  524. [ 3.402660] imx6q-pcie 5f010000.pcie: MEM 0x0070000000..0x007fefffff -> 0x0070000000
  525. [ 3.411116] imx-drm display-subsystem: bound imx-dpu-crtc.0 (ops dpu_crtc_ops)
  526. [ 3.428127] imx8q-pcie-phy 5f190000.pcie-phy: PHY PLL is locked
  527. [ 3.433647] imx-drm display-subsystem: bound imx-dpu-crtc.1 (ops dpu_crtc_ops)
  528. [ 3.470191] imx-drm display-subsystem: bound imx-dpu-crtc.3 (ops dpu_crtc_ops)
  529. [ 3.477676] imx-drm display-subsystem: bound imx-dpu-crtc.4 (ops dpu_crtc_ops)
  530. [ 3.484965] [drm:drm_bridge_attach] *ERROR* failed to attach bridge /bus@56220000/dsi_host@56228000 to encoder DSI-147: -19
  531. [ 3.496129] imx-drm display-subsystem: bound 56228000.dsi_host (ops nwl_dsi_component_ops)
  532. [ 3.504807] imx-drm display-subsystem: bound bus@56240000:ldb@562410e0 (ops imx8qm_ldb_ops)
  533. [ 3.513217] [drm:drm_bridge_attach] *ERROR* failed to attach bridge /bus@57220000/dsi_host@57228000 to encoder DSI-147: -19
  534. [ 3.524377] imx-drm display-subsystem: bound 57228000.dsi_host (ops nwl_dsi_component_ops)
  535. [ 3.532776] imx-drm display-subsystem: bound bus@57240000:ldb@572410e0 (ops imx8qm_ldb_ops)
  536. [ 3.541600] [drm] Initialized imx-drm 1.0.0 20120507 for display-subsystem on minor 1
  537. [ 3.550158] ahci-imx 5f020000.sata: Adding to iommu group 3
  538. [ 3.556374] ahci-imx 5f020000.sata: supply ahci not found, using dummy regulator
  539. [ 3.563881] ahci-imx 5f020000.sata: supply phy not found, using dummy regulator
  540. [ 3.571243] ahci-imx 5f020000.sata: supply target not found, using dummy regulator
  541. [ 3.579939] imx8q-pcie-phy 5f1a0000.pcie-phy: PHY PLL is locked
  542. [ 3.585879] imx8q-pcie-phy 5f1a0000.pcie-phy: PHY calibration is done
  543. [ 3.594346] ahci-imx 5f020000.sata: no ahb clock.
  544. [ 3.595230] imx6q-pcie 5f000000.pcie: iATU: unroll F, 6 ob, 6 ib, align 4K, limit 4G
  545. [ 3.599137] ahci-imx 5f020000.sata: AHCI 0001.0301 32 slots 1 ports 6 Gbps 0x1 impl platform mode
  546. [ 3.607337] imx6q-pcie 5f000000.pcie: eDMA: unroll F, 1 wr, 1 rd
  547. [ 3.615695] ahci-imx 5f020000.sata: flags: 64bit ncq sntf pm clo only pmp fbs pio slum part ccc sadm sds apst
  548. [ 3.632430] scsi host0: ahci-imx
  549. [ 3.635908] ata1: SATA max UDMA/133 mmio [mem 0x5f020000-0x5f02ffff] port 0x100 irq 588
  550. [ 3.649788] debugfs: Directory 'lvds1' with parent 'pm_genpd' already present!
  551. [ 3.655355] imx6q-pcie 5f010000.pcie: iATU: unroll F, 6 ob, 6 ib, align 4K, limit 4G
  552. [ 3.657528] debugfs: Directory 'mipi1-i2c1' with parent 'pm_genpd' already present!
  553. [ 3.665499] imx6q-pcie 5f010000.pcie: eDMA: unroll F, 1 wr, 1 rd
  554. [ 3.672465] debugfs: Directory 'mipi1-i2c0' with parent 'pm_genpd' already present!
  555. [ 3.672474] debugfs: Directory 'mipi1-pwm0' with parent 'pm_genpd' already present!
  556. [ 3.672479] debugfs: Directory 'mipi1' with parent 'pm_genpd' already present!
  557. [ 3.710641] isi-m2m 58100000.isi:m2m_device: Register m2m success for ISI.0
  558. [ 3.717866] cfg80211: Loading compiled-in X.509 certificates for regulatory database
  559. [ 3.727488] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
  560. [ 3.734115] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
  561. [ 3.742767] platform regulatory.0: Falling back to sysfs fallback for: regulatory.db
  562. [ 3.768167] ALSA device list:
  563. [ 3.771396] No soundcards found.
  564. [ 3.957551] ata1: SATA link down (SStatus 0 SControl 300)
  565. [ 4.622029] imx6q-pcie 5f000000.pcie: Phy link never came up
  566. [ 4.679260] imx6q-pcie 5f010000.pcie: Phy link never came up
  567. [ 4.685190] imx6q-pcie 5f010000.pcie: Let PCIe_b probe failed when link is down.
  568. [ 4.694251] imx6q-pcie: probe of 5f010000.pcie failed with error -110
  569. [ 5.628005] imx6q-pcie 5f000000.pcie: Phy link never came up
  570. [ 5.633937] imx6q-pcie 5f000000.pcie: PCI host bridge to bus 0000:00
  571. [ 5.640329] pci_bus 0000:00: root bus resource [bus 00-ff]
  572. [ 5.645847] pci_bus 0000:00: root bus resource [io 0x0000-0xffff]
  573. [ 5.652060] pci_bus 0000:00: root bus resource [mem 0x60000000-0x6fefffff]
  574. [ 5.659008] pci 0000:00:00.0: [1957:0000] type 01 class 0x060400
  575. [ 5.665060] pci 0000:00:00.0: reg 0x10: [mem 0x00000000-0x00ffffff]
  576. [ 5.671370] pci 0000:00:00.0: reg 0x38: [mem 0x00000000-0x00ffffff pref]
  577. [ 5.678175] pci 0000:00:00.0: supports D1 D2
  578. [ 5.682551] pci 0000:00:00.0: PME# supported from D0 D1 D2 D3hot
  579. [ 5.696464] pci 0000:00:00.0: BAR 0: assigned [mem 0x60000000-0x60ffffff]
  580. [ 5.703280] pci 0000:00:00.0: BAR 6: assigned [mem 0x61000000-0x61ffffff pref]
  581. [ 5.710529] pci 0000:00:00.0: PCI bridge to [bus 01-ff]
  582. [ 5.716177] pcieport 0000:00:00.0: PME: Signaling with IRQ 592
  583. [ 5.949108] EXT4-fs (mmcblk1p2): recovery complete
  584. [ 5.957066] EXT4-fs (mmcblk1p2): mounted filesystem with ordered data mode. Quota mode: none.
  585. [ 5.965706] VFS: Mounted root (ext4 filesystem) on device 179:98.
  586. [ 5.974307] devtmpfs: mounted
  587. [ 5.979330] Freeing unused kernel memory: 3328K
  588. [ 5.984170] Run /sbin/init as init process
  589. [ 6.196880] systemd[1]: System time before build time, advancing clock.
  590. [ 6.259680] systemd[1]: systemd 253.1^ running in system mode (+PAM -AUDIT -SELINUX -APPARMOR +IMA -SMACK +SECCOMP -GCRYPT -GNUTLS -OPENSSL +ACL +BLKID -CURL -ELFUTILS -FIDO2 -IDN2 -IDN -IPTC +KMOD -LIBCRYPTSETUP +LIBFDISK -PCRE2 -PWQUALITY -P11KIT -QRENCODE -TPM2 -BZIP2 -LZ4 -XZ -ZLIB +ZSTD -BPF_FRAMEWORK -XKBCOMMON +UTMP +SYSVINIT default-hierarchy=hybrid)
  591. [ 6.291733] systemd[1]: Detected architecture arm64.
  592.  
  593. Welcome to NXP i.MX Release Distro 6.1-mickledore (mickledore)!
  594.  
  595. [ 6.383222] systemd[1]: Hostname set to <imx8qmmek>.
  596. [ 6.496439] systemd-sysv-generator[280]: SysV service '/etc/init.d/rc.local' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust.
  597. [ 6.527230] systemd-sysv-generator[280]: SysV service '/etc/init.d/save-rtc.sh' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust.
  598. [ 6.555647] systemd-sysv-generator[280]: SysV service '/etc/init.d/sendsigs' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust.
  599. [ 6.582538] systemd-sysv-generator[280]: SysV service '/etc/init.d/trousers' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust.
  600. [ 6.613559] systemd-sysv-generator[280]: SysV service '/etc/init.d/umountfs' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust.
  601. [ 6.637888] systemd-sysv-generator[280]: SysV service '/etc/init.d/halt' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust.
  602. [ 6.663122] systemd-sysv-generator[280]: SysV service '/etc/init.d/fuse' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust.
  603. [ 6.686773] systemd-sysv-generator[280]: SysV service '/etc/init.d/umountnfs.sh' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust.
  604. [ 6.711520] systemd-sysv-generator[280]: SysV service '/etc/init.d/single' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust.
  605. [ 6.735518] systemd-sysv-generator[280]: SysV service '/etc/init.d/reboot' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust.
  606. [ 6.762892] systemd-sysv-generator[280]: SysV service '/etc/init.d/sshd' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust.
  607. [ 6.947075] random: crng init done
  608. [ 7.181277] systemd[1]: Queued start job for default target Graphical Interface.
  609. [ 7.291699] systemd[1]: Created slice Slice /system/getty.
  610. [ OK ] Created slice Slice /system/getty.
  611. [ 7.317757] systemd[1]: Created slice Slice /system/modprobe.
  612. [ OK ] Created slice Slice /system/modprobe.
  613. [ 7.342199] systemd[1]: Created slice Slice /system/serial-getty.
  614. [ OK ] Created slice Slice /system/serial-getty.
  615. [ 7.365534] systemd[1]: Created slice User and Session Slice.
  616. [ OK ] Created slice User and Session Slice.
  617. [ 7.387597] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
  618. [ OK ] Started Dispatch Password …ts to Console Directory Watch.
  619. [ 7.411535] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
  620. [ OK ] Started Forward Password R…uests to Wall Directory Watch.
  621. [ 7.435643] systemd[1]: Reached target Host and Network Name Lookups.
  622. [ OK ] Reached target Host and Network Name Lookups.
  623. [ 7.459226] systemd[1]: Reached target Path Units.
  624. [ OK ] Reached target Path Units.
  625. [ 7.479269] systemd[1]: Reached target Remote File Systems.
  626. [ OK ] Reached target Remote File Systems.
  627. [ 7.499251] systemd[1]: Reached target Slice Units.
  628. [ OK ] Reached target Slice Units.
  629. [ 7.519299] systemd[1]: Reached target Swaps.
  630. [ OK ] Reached target Swaps.
  631. [ 7.589349] systemd[1]: Listening on RPCbind Server Activation Socket.
  632. [ OK ] Listening on RPCbind Server Activation Socket.
  633. [ 7.611495] systemd[1]: Reached target RPC Port Mapper.
  634. [ OK ] Reached target RPC Port Mapper.
  635. [ 7.632246] systemd[1]: Listening on Syslog Socket.
  636. [ OK ] Listening on Syslog Socket.
  637. [ 7.651585] systemd[1]: Listening on initctl Compatibility Named Pipe.
  638. [ OK ] Listening on initctl Compatibility Named Pipe.
  639. [ 7.676312] systemd[1]: Listening on Journal Audit Socket.
  640. [ OK ] Listening on Journal Audit Socket.
  641. [ 7.699796] systemd[1]: Listening on Journal Socket (/dev/log).
  642. [ OK ] Listening on Journal Socket (/dev/log).
  643. [ 7.724031] systemd[1]: Listening on Journal Socket.
  644. [ OK ] Listening on Journal Socket.
  645. [ 7.744248] systemd[1]: Listening on Network Service Netlink Socket.
  646. [ OK ] Listening on Network Service Netlink Socket.
  647. [ 7.768130] systemd[1]: Listening on udev Control Socket.
  648. [ OK ] Listening on udev Control Socket.
  649. [ 7.791802] systemd[1]: Listening on udev Kernel Socket.
  650. [ OK ] Listening on udev Kernel Socket.
  651. [ 7.811847] systemd[1]: Listening on User Database Manager Socket.
  652. [ OK ] Listening on User Database Manager Socket.
  653. [ 7.859727] systemd[1]: Mounting Huge Pages File System...
  654. Mounting Huge Pages File System...
  655. [ 7.886881] systemd[1]: Mounting POSIX Message Queue File System...
  656. Mounting POSIX Message Queue File System...
  657. [ 7.919499] systemd[1]: Mounting Kernel Debug File System...
  658. Mounting Kernel Debug File System...
  659. [ 7.940074] systemd[1]: Kernel Trace File System was skipped because of an unmet condition check (ConditionPathExists=/sys/kernel/tracing).
  660. [ 7.983790] systemd[1]: Mounting Temporary Directory /tmp...
  661. Mounting Temporary Directory /tmp...
  662. [ 8.012478] systemd[1]: Starting Create List of Static Device Nodes...
  663. Starting Create List of Static Device Nodes...
  664. [ 8.042952] systemd[1]: Starting Load Kernel Module configfs...
  665. Starting Load Kernel Module configfs...
  666. [ 8.070858] systemd[1]: Starting Load Kernel Module drm...
  667. Starting Load Kernel Module drm...
  668. [ 8.098920] systemd[1]: Starting Load Kernel Module fuse...
  669. Starting Load Kernel Module fuse...
  670. [ 8.120751] fuse: init (API version 7.37)
  671. [ 8.130007] systemd[1]: Starting RPC Bind...
  672. Starting RPC Bind...
  673. [ 8.147639] systemd[1]: File System Check on Root Device was skipped because of an unmet condition check (ConditionPathIsReadWrite=!/).
  674. [ 8.200136] systemd[1]: Starting Journal Service...
  675. Starting Journal Service...
  676. [ 8.233096] systemd[1]: Starting Load Kernel Modules...
  677. Starting Load Kernel Modules...
  678. [ 8.262054] systemd[1]: Starting Generate network units from Kernel command line...
  679. Starting Generate network …ts from Kernel com[ 8.275430] systemd-journald[295]: Collecting audit messages is enabled.
  680. mand line...
  681. [ 8.319889] systemd[1]: Starting Remount Root and Kernel File Systems...
  682. Starting Remount Root and Kernel File Systems...
  683. [ 8.344661] EXT4-fs (mmcblk1p2): re-mounted. Quota mode: none.
  684. [ 8.348857] systemd[1]: Starting Coldplug All udev Devices...
  685. Starting Coldplug All udev Devices...
  686. [ 8.378794] systemd[1]: Started RPC Bind.
  687. [ OK ] Started RPC Bind.
  688. [ 8.399838] systemd[1]: Mounted Huge Pages File System.
  689. [ OK ] Mounted Huge Pages File System.
  690. [ 8.419679] systemd[1]: Mounted POSIX Message Queue File System.
  691. [ OK ] Mounted POSIX Message Queue File System.
  692. [ 8.443703] systemd[1]: Started Journal Service.
  693. [ OK ] Started Journal Service.
  694. [ OK ] Mounted Kernel Debug File System.
  695. [ OK ] Mounted Temporary Directory /tmp.
  696. [ OK ] Finished Create List of Static Device Nodes.
  697. [ OK ] Finished Load Kernel Module configfs.
  698. [ OK ] Finished Load Kernel Module drm.
  699. [ OK ] Finished Load Kernel Module fuse.
  700. [ OK ] Finished Load Kernel Modules.
  701. [ OK ] Finished Generate network units from Kernel command line.
  702. [ OK ] Finished Remount Root and Kernel File Systems.
  703. Mounting FUSE Control File System...
  704. Mounting Kernel Configuration File System...
  705. Starting Flush Journal to Persistent Storage...
  706. [ 8.743905] systemd-journald[295]: Received client request to flush runtime journal.
  707. Starting Apply Kernel Variables...
  708. Starting Create Static Device Nodes in /dev...
  709. [ OK ] Mounted FUSE Control File System.
  710. [ OK ] Mounted Kernel Configuration File System.
  711. [ OK ] Finished Flush Journal to Persistent Storage.
  712. [ OK ] Finished Apply Kernel Variables.
  713. [ OK ] Finished Create Static Device Nodes in /dev.
  714. [ OK ] Reached target Preparation for Local File Systems.
  715. Mounting /var/volatile...
  716. [ 8.976981] audit: type=1334 audit(1677836960.776:2): prog-id=5 op=LOAD
  717. [ 8.983698] audit: type=1334 audit(1677836960.784:3): prog-id=6 op=LOAD
  718. Starting Rule-based Manage…for Device Events and Files...
  719. [ OK ] Mounted /var/volatile.
  720. Starting Load/Save OS Random Seed...
  721. [ OK ] Reached target Local File Systems.
  722. Starting Create Volatile Files and Directories...
  723. [ OK ] Finished Load/Save OS Random Seed.
  724. [ OK ] Started Rule-based Manager for Device Events and Files.
  725. [ OK ] Finished Create Volatile Files and Directories.
  726. Starting Network Time Synchronization...
  727. Starting Record System Boot/Shutdown in UTMP...
  728. [ OK ] Finished Record System Boot/Shutdown in UTMP.
  729. [ OK ] Finished Coldplug All udev Devices.
  730. [ OK ] Started Network Time Synchronization.
  731. [ OK ] Reached target System Initialization.
  732. [ OK ] Started Daily Cleanup of Temporary Directories.
  733. [ OK ] Reached target System Time Set.
  734. [ OK ] Started Daily rotation of log files.
  735. [ OK ] Reached target Timer Units.
  736. [ OK ] Listening on Avahi mDNS/DNS-SD Stack Activation Socket.
  737. [ OK ] Listening on D-Bus System Message Bus Socket.
  738. Starting Docker Socket for the API...
  739. Starting sshd.socket...
  740. Starting Weston socket...
  741. [ OK ] Listening on Docker Socket for the API.
  742. [ OK ] Listening on sshd.socket.
  743. [ 9.835312] caam 31400000.crypto: device ID = 0x0a16040000000100 (Era 9)
  744. [ 9.842206] caam 31400000.crypto: job rings = 1, qi = 0
  745. [ 9.847777] amphion-vpu-core 2d090000.vpu-core: encoder firmware version : 1.3.4
  746. [ OK ] Listening on Weston socket.
  747. [ 9.871258] amphion-vpu-core 2d080000.vpu-core: decoder firmware version : 1.8.9
  748. [ OK ] Reached target Socket Units.
  749. [ OK ] Reached target Basic System.
  750. [ 9.951372] imx8_media_dev: module is from the staging directory, the quality is unknown, you have been warned.
  751. [ OK ] Started Job spooling tools.
  752. [ 9.998580] remoteproc remoteproc2: imx-dsp-rproc is available
  753. [ 9.998931] mx8-img-md: Registered mxc_isi.0.capture as /dev/video3
  754. [ 10.011776] debugfs: File 'Playback' in directory 'dapm' already present!
  755. [ 10.018943] debugfs: File 'Capture' in directory 'dapm' already present!
  756. [ 10.039829] mx8-img-md: Registered mxc_isi.1.capture as /dev/video4
  757. [ OK ] Started Periodic Command Scheduler.
  758. [ 10.079023] mx8-img-md: Registered mxc_isi.2.capture as /dev/video5
  759. [ 10.116055] mx8-img-md: Registered mxc_isi.3.capture as /dev/video6
  760. Starting D-Bus System Message Bus...[ 10.126042] mx8-img-md: Registered mxc_isi.4.capture as /dev/video7
  761.  
  762. [ 10.137227] mx8-img-md: Registered mxc_isi.5.capture as /dev/video8
  763. [ 10.183968] mx8-img-md: Registered mxc_isi.6.capture as /dev/video9
  764. [ 10.233782] mx8-img-md: Registered mxc_isi.7.capture as /dev/video10
  765. [ OK ] Started Linux Firmware Loader Daemon.
  766. [ 10.265249] unregister ISI channel: mxc_isi.0
  767. [ OK ] Started Configuration for i.MX GPU (Former rc_gpu.S).
  768. [ 10.301402] unregister ISI channel: mxc_isi.1
  769. [ 10.317171] unregister ISI channel: mxc_isi.2
  770. [ 10.325395] unregister ISI channel: mxc_isi.3
  771. [ 10.339535] unregister ISI channel: mxc_isi.4
  772. [ 10.353263] fsl-asoc-card sound-wm8960: ASoC: CODEC DAI cs42888 not registered
  773. [ 10.367469] unregister ISI channel: mxc_isi.5
  774. Starting IPv6 Packet Filtering Framework...
  775. [ 10.394449] unregister ISI channel: mxc_isi.6
  776. [ 10.409549] unregister ISI channel: mxc_isi.7
  777. Starting IPv4 Packet Filtering Framework...
  778. Starting Telephony service...
  779. [ OK ] Started Parsec Service.
  780. Starting LSB: Run /etc/rc.local if it exist...
  781. [ OK ] Started System Logging Service.
  782. Starting User Login Management...
  783. [ OK ] Started TEE Supplicant.
  784. Starting OpenSSH Key Generation...
  785. [ OK ] Started D-Bus System Message Bus.
  786. [ OK ] Finished IPv6 Packet Filtering Framework.
  787. [ OK ] Finished IPv4 Packet Filtering Framework.
  788. [ OK ] Started LSB: Run /etc/rc.local if it exist.
  789. [ OK ] Finished OpenSSH Key Generation.
  790. [ OK ] Started User Login Management.
  791. [ OK ] Started Telephony service.
  792. [ OK ] Created slice Slice /system/systemd-backlight.
  793. [ OK ] Created slice Slice /system/systemd-fsck.
  794. [ OK ] Reached target Preparation for Network.
  795. [ OK ] Reached target Hardware activated USB gadget.
  796. Starting Save/Restore Sound Card State...
  797. Starting Connection service...
  798. Starting Load/Save Screen … backlight:lvds_backlight@0...
  799. Starting Load/Save Screen … backlight:lvds_backlight@1...
  800. Starting File System Check on /dev/mmcblk0p1...
  801. Starting File System Check on /dev/mmcblk0p2...
  802. Starting File System Check on /dev/mmcblk1p1...
  803. Starting Network Configuration...
  804. [ OK ] Finished Save/Restore Sound Card State.
  805. [ OK ] Finished Load/Save Screen …of backlight:lvds_backlight@0.
  806. [ OK ] Finished Load/Save Screen …of backlight:lvds_backlight@1.
  807. [ OK ] Reached target Sound Card.
  808. [ OK ] Finished File System Check on /dev/mmcblk0p1.
  809. Mounting /run/media/boot-mmcblk0p1...
  810. [ OK ] Finished File System Check on /dev/mmcblk0p2.
  811. [ OK ] Started Connection service.
  812. [ OK ] Finished File System Check on /dev/mmcblk1p1.
  813. [ OK ] Mounted /run/media/boot-mmcblk0p1.
  814. Mounting /run/media/boot-mmcblk1p1...
  815. Mounting /run/media/root-mmcblk0p2...
  816. Starting Avahi mDNS/DNS-SD Stack...
  817. Starting Hostname Service...
  818. Starting WPA supplicant...
  819. [ OK ] Started Network Configuration.
  820. [ OK ] Mounted /run/media/boot-mmcblk1p1.
  821. [ OK ] Mounted /run/media/root-mmcblk0p2.
  822. [ OK ] Started Avahi mDNS/DNS-SD Stack.
  823. Starting Wait for Network to be Configured...
  824. [ OK ] Started WPA supplicant.
  825. [ OK ] Reached target Network.
  826. Starting containerd container runtime...
  827. [ OK ] Started NFS status monitor for NFSv2/3 locking..
  828. Starting Network Time Service...
  829. Starting /etc/rc.local Compatibility...
  830. Starting Permit User Sessions...
  831. [ OK ] Started /etc/rc.local Compatibility.
  832. [ OK ] Started Network Time Service.
  833. [ OK ] Finished Permit User Sessions.
  834. [ OK ] Started Hostname Service.
  835. [ OK ] Started Getty on tty1.
  836. [ OK ] Started Serial Getty on ttyLP0.
  837. [ OK ] Reached target Login Prompts.
  838. Starting Weston, a Wayland…ositor, as a system service...
  839. [ 12.353687] audit: type=1334 audit(1677843024.762:8): prog-id=11 op=LOAD
  840. [ 12.360679] audit: type=1334 audit(1677843024.770:9): prog-id=12 op=LOAD
  841. Starting User Database Manager...
  842. [ OK ] Started User Database Manager.
  843. [ OK ] Created slice User Slice of UID 0.
  844. Starting User Runtime Directory /run/user/0...
  845. [ OK ] Finished User Runtime Directory /run/user/0.
  846. Starting User Manager for UID 0...
  847. [ 12.809754] audit: type=1006 audit(1677843025.218:10): pid=803 uid=0 old-auid=4294967295 auid=0 tty=(none) old-ses=4294967295 ses=1 res=1
  848. [ 12.822296] audit: type=1300 audit(1677843025.218:10): arch=c00000b7 syscall=64 success=yes exit=1 a0=8 a1=fffff8cee2f0 a2=1 a3=1 items=0 ppid=1 pid=803 auid=0 uid=0 gid=0 euid=0 suid=0 fsuid=0 egid=0 sgid=0 fsgid=0 tty=(none) ses=1 comm="(systemd)" exe="/lib/systemd/systemd" key=(null)
  849. [ OK ] Started containerd container runtime.
  850. [ OK ] Started User Manager for UID 0.
  851. [ OK ] Started Session c1 of User root.
  852. [ 13.687928] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
  853. [ 13.688250] fec 5b040000.ethernet eth0: Link is Up - 100Mbps/Full - flow control off
  854. [FAILED] Failed to start Weston, a …mpositor, as a system service.
  855. See 'systemctl status weston.service' for details.
  856.  
  857. NXP i.MX Release Distro 6.1-mickledore imx8qmmek ttyLP0
Add Comment
Please, Sign In to add comment
Public Pastes
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!