Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- TIM-1.0
- WTMI-devel-18.07.0-6050fd5
- WTMI: system early-init
- CPU VDD voltage default value: 1.155V
- NOTICE: Booting Trusted Firmware
- NOTICE: BL1: v1.5(release):711ecd3 (Marvell-armada-18.09.4)
- NOTICE: BL1: Built : 21:52:23, Sep 5 2018
- NOTICE: BL1: Booting BL2
- NOTICE: BL2: v1.5(release):711ecd3 (Marvell-armada-18.09.4)
- NOTICE: BL2: Built : 21:52:26, Sep 5 2018
- NOTICE: BL1: Booting BL31
- NOTICE: BL31: v1.5(release):711ecd3 (Marvell-armada-18.09.4)
- NOTICE: BL31: Built : 21:5
- U-Boot 2017.03-armada-18.09.1-ga92bd86-armbian (Sep 05 2018 - 21:49:34 +0200)
- Model: Marvell Armada 3720 Community Board ESPRESSOBin
- CPU 1000 [MHz]
- L2 1000 [MHz]
- NB AXI 250 [MHz]
- SB AXI 250 [MHz]
- DDR 800 [MHz]
- DRAM: 1 GiB
- U-Boot DT blob at : 000000003f7142d8
- Comphy chip #0:
- Comphy-0: USB3 5 Gbps
- Comphy-1: PEX0 2.5 Gbps
- Comphy-2: SATA0 6 Gbps
- SATA link 0 timeout.
- AHCI 0001.0300 32 slots 1 ports 6 Gbps 0x1 impl SATA mode
- flags: ncq led only pmp fbss pio slum part sxs
- PCIE-0: Link down
- MMC: sdhci@d0000: 0
- SF: Detected w25q32dw with page size 256 Bytes, erase size 4 KiB, total 4 MiB
- Net: eth0: neta@30000 [PRIME]
- Hit any key to stop autoboot: 0
- switch to partitions #0, OK
- mmc0 is current device
- 15546880 bytes read in 676 ms (21.9 MiB/s)
- 4589284 bytes read in 207 ms (21.1 MiB/s)
- 8607 bytes read in 16 ms (524.4 KiB/s)
- ## Loading init Ramdisk from Legacy Image at 01100000 ...
- Image Name: uInitrd
- Image Type: AArch64 Linux RAMDisk Image (gzip compressed)
- Data Size: 4589220 Bytes = 4.4 MiB
- Load Address: 00000000
- Entry Point: 00000000
- Verifying Checksum ... OK
- ## Flattened Device Tree blob at 06000000
- Booting using the fdt blob at 0x6000000
- Loading Ramdisk to 3f2b2000, end 3f7126a4 ... OK
- Using Device Tree in place at 0000000006000000, end 000000000600519e
- Starting kernel ...
- [ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd034]
- [ 0.000000] Linux version 4.18.5-mvebu64 (root@armbian.com) (gcc version 7.2.1 20171011 (Linaro GCC 7.2-2017.11)) #1 SMP PREEMPT Sun Aug 26 19:20:22 CEST 2018
- [ 0.000000] Machine model: Globalscale Marvell ESPRESSOBin Board
- [ 0.000000] earlycon: ar3700_uart0 at MMIO 0x00000000d0012000 (options '')
- [ 0.000000] bootconsole [ar3700_uart0] enabled
- [ 0.000000] efi: Getting EFI parameters from FDT:
- [ 0.000000] efi: UEFI not found.
- [ 0.000000] cma: Reserved 16 MiB at 0x000000003e000000
- [ 0.000000] NUMA: No NUMA configuration found
- [ 0.000000] NUMA: Faking a node at [mem 0x0000000000000000-0x000000003fffffff]
- [ 0.000000] NUMA: NODE_DATA [mem 0x3ffecb40-0x3ffee2ff]
- [ 0.000000] Zone ranges:
- [ 0.000000] DMA32 [mem 0x0000000000000000-0x000000003fffffff]
- [ 0.000000] Normal empty
- [ 0.000000] Movable zone start for each node
- [ 0.000000] Early memory node ranges
- [ 0.000000] node 0: [mem 0x0000000000000000-0x000000003fffffff]
- [ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x000000003fffffff]
- [ 0.000000] psci: probing for conduit method from DT.
- [ 0.000000] psci: PSCIv1.1 detected in firmware.
- [ 0.000000] psci: Using standard PSCI v0.2 function IDs
- [ 0.000000] psci: MIGRATE_INFO_TYPE not supported.
- [ 0.000000] psci: SMC Calling Convention v1.1
- [ 0.000000] random: get_random_bytes called from start_kernel+0xa8/0x418 with crng_init=0
- [ 0.000000] percpu: Embedded 23 pages/cpu @(____ptrval____) s56472 r8192 d29544 u94208
- [ 0.000000] Detected VIPT I-cache on CPU0
- [ 0.000000] CPU features: enabling workaround for ARM erratum 845719
- [ 0.000000] Speculative Store Bypass Disable mitigation not required
- [ 0.000000] CPU features: detected: Kernel page table isolation (KPTI)
- [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 258048
- [ 0.000000] Policy zone: DMA32
- [ 0.000000] Kernel command line: console=ttyMV0,115200 earlycon=ar3700_uart,0xd0012000 root=/dev/mmcblk1p1 rw rootwait
- [ 0.000000] Memory: 995324K/1048576K available (10556K kernel code, 718K rwdata, 3192K rodata, 640K init, 500K bss, 36868K reserved, 16384K cma-reserved)
- [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
- [ 0.000000] Preemptible hierarchical RCU implementation.
- [ 0.000000] RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=2.
- [ 0.000000] Tasks RCU enabled.
- [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
- [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
- [ 0.000000] GICv3: GIC: Using split EOI/Deactivate mode
- [ 0.000000] GICv3: Distributor has no Range Selector support
- [ 0.000000] GICv3: no VLPI support, no direct LPI support
- [ 0.000000] GICv3: CPU0: found redistributor 0 region 0:0x00000000d1d40000
- [ 0.000000] arch_timer: cp15 timer(s) running at 12.50MHz (phys).
- [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x2e2049cda, max_idle_ns: 440795202628 ns
- [ 0.000004] sched_clock: 56 bits at 12MHz, resolution 80ns, wraps every 4398046511080ns
- [ 0.008433] Console: colour dummy device 80x25
- [ 0.012975] Calibrating delay loop (skipped), value calculated using timer frequency.. 25.00 BogoMIPS (lpj=12500)
- [ 0.023501] pid_max: default: 32768 minimum: 301
- [ 0.028309] Security Framework initialized
- [ 0.033007] Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)
- [ 0.040547] Inode-cache hash table entries: 65536 (order: 7, 524288 bytes)
- [ 0.047576] Mount-cache hash table entries: 2048 (order: 2, 16384 bytes)
- [ 0.054460] Mountpoint-cache hash table entries: 2048 (order: 2, 16384 bytes)
- [ 0.067916] ASID allocator initialised with 32768 entries
- [ 0.073484] Hierarchical SRCU implementation.
- [ 0.080104] EFI services will not be available.
- [ 0.086711] smp: Bringing up secondary CPUs ...
- [ 0.099460] Detected VIPT I-cache on CPU1
- [ 0.099488] GICv3: CPU1: found redistributor 1 region 0:0x00000000d1d60000
- [ 0.099521] CPU1: Booted secondary processor 0x0000000001 [0x410fd034]
- [ 0.099613] smp: Brought up 1 node, 2 CPUs
- [ 0.121684] SMP: Total of 2 processors activated.
- [ 0.126512] CPU features: detected: GIC system register CPU interface
- [ 0.133149] CPU features: detected: 32-bit EL0 Support
- [ 0.141808] CPU: All CPU(s) started at EL2
- [ 0.145955] alternatives: patching kernel code
- [ 0.151570] devtmpfs: initialized
- [ 0.157179] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
- [ 0.167171] futex hash table entries: 512 (order: 3, 32768 bytes)
- [ 0.173997] xor: measuring software checksum speed
- [ 0.188061] 8regs : 1920.000 MB/sec
- [ 0.202103] 8regs_prefetch: 1712.000 MB/sec
- [ 0.216145] 32regs : 2360.000 MB/sec
- [ 0.230188] 32regs_prefetch: 2048.000 MB/sec
- [ 0.234860] xor: using function: 32regs (2360.000 MB/sec)
- [ 0.240471] pinctrl core: initialized pinctrl subsystem
- [ 0.246371] DMI not present or invalid.
- [ 0.250556] NET: Registered protocol family 16
- [ 0.255417] audit: initializing netlink subsys (disabled)
- [ 0.261075] audit: type=2000 audit(0.147:1): state=initialized audit_enabled=0 res=1
- [ 0.270024] cpuidle: using governor ladder
- [ 0.274200] cpuidle: using governor menu
- [ 0.278424] vdso: 2 pages (1 code @ (____ptrval____), 1 data @ (____ptrval____))
- [ 0.285980] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
- [ 0.294723] DMA: preallocated 2048 KiB pool for atomic allocations
- [ 0.301142] Serial: AMBA PL011 UART driver
- [ 0.306389] mvebu-uart d0012000.serial: could not find pctldev for node /soc/internal-regs@d0000000/pinctrl@13800/uart1-pins, deferring probe
- [ 0.329144] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
- [ 0.336367] cryptd: max_cpu_qlen set to 1000
- [ 0.357793] raid6: int64x1 gen() 398 MB/s
- [ 0.379254] raid6: int64x1 xor() 375 MB/s
- [ 0.400714] raid6: int64x2 gen() 601 MB/s
- [ 0.422155] raid6: int64x2 xor() 511 MB/s
- [ 0.443570] raid6: int64x4 gen() 906 MB/s
- [ 0.464979] raid6: int64x4 xor() 646 MB/s
- [ 0.486382] raid6: int64x8 gen() 835 MB/s
- [ 0.507826] raid6: int64x8 xor() 632 MB/s
- [ 0.529267] raid6: neonx1 gen() 628 MB/s
- [ 0.550674] raid6: neonx1 xor() 720 MB/s
- [ 0.572114] raid6: neonx2 gen() 1027 MB/s
- [ 0.593519] raid6: neonx2 xor() 1027 MB/s
- [ 0.614962] raid6: neonx4 gen() 1324 MB/s
- [ 0.636368] raid6: neonx4 xor() 1234 MB/s
- [ 0.657794] raid6: neonx8 gen() 1437 MB/s
- [ 0.679203] raid6: neonx8 xor() 1308 MB/s
- [ 0.683517] raid6: using algorithm neonx8 gen() 1437 MB/s
- [ 0.689072] raid6: .... xor() 1308 MB/s, rmw enabled
- [ 0.694179] raid6: using neon recovery algorithm
- [ 0.699129] ACPI: Interpreter disabled.
- [ 0.703482] vgaarb: loaded
- [ 0.706489] SCSI subsystem initialized
- [ 0.710646] usbcore: registered new interface driver usbfs
- [ 0.716254] usbcore: registered new interface driver hub
- [ 0.721733] usbcore: registered new device driver usb
- [ 0.727055] pps_core: LinuxPPS API ver. 1 registered
- [ 0.732089] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
- [ 0.741504] PTP clock support registered
- [ 0.746246] clocksource: Switched to clocksource arch_sys_counter
- [ 0.752630] VFS: Disk quotas dquot_6.6.0
- [ 0.756649] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
- [ 0.763836] pnp: PnP ACPI: disabled
- [ 0.772767] NET: Registered protocol family 2
- [ 0.777684] tcp_listen_portaddr_hash hash table entries: 512 (order: 1, 8192 bytes)
- [ 0.785567] TCP established hash table entries: 8192 (order: 4, 65536 bytes)
- [ 0.792843] TCP bind hash table entries: 8192 (order: 5, 131072 bytes)
- [ 0.799614] TCP: Hash tables configured (established 8192 bind 8192)
- [ 0.806255] UDP hash table entries: 512 (order: 2, 16384 bytes)
- [ 0.812308] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
- [ 0.818982] NET: Registered protocol family 1
- [ 0.823850] RPC: Registered named UNIX socket transport module.
- [ 0.829909] RPC: Registered udp transport module.
- [ 0.834712] RPC: Registered tcp transport module.
- [ 0.839549] RPC: Registered tcp NFSv4.1 backchannel transport module.
- [ 0.846370] Trying to unpack rootfs image as initramfs...
- [ 1.085623] Freeing initrd memory: 4480K
- [ 1.090111] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters available
- [ 1.098192] kvm [1]: 8-bit VMID
- [ 1.102018] kvm [1]: vgic-v2@d1da0000
- [ 1.105745] kvm [1]: GIC system register CPU interface enabled
- [ 1.111756] kvm [1]: vgic interrupt IRQ1
- [ 1.115818] kvm [1]: Hyp mode initialized successfully
- [ 1.124915] Initialise system trusted keyrings
- [ 1.129629] workingset: timestamp_bits=44 max_order=18 bucket_order=0
- [ 1.143102] NFS: Registering the id_resolver key type
- [ 1.148278] Key type id_resolver registered
- [ 1.152533] Key type id_legacy registered
- [ 1.156661] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
- [ 1.163369] jffs2: version 2.2. (NAND) ?? 2001-2006 Red Hat, Inc.
- [ 1.171504] Key type asymmetric registered
- [ 1.175665] Asymmetric key parser 'x509' registered
- [ 1.180866] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
- [ 1.188557] io scheduler noop registered
- [ 1.192522] io scheduler deadline registered
- [ 1.197056] io scheduler cfq registered (default)
- [ 1.201825] io scheduler mq-deadline registered
- [ 1.206489] io scheduler kyber registered
- [ 1.210706] io scheduler bfq registered
- [ 1.217589] advk-pcie d0070000.pcie: host bridge /soc/pcie@d0070000 ranges:
- [ 1.224721] advk-pcie d0070000.pcie: MEM 0xe8000000..0xe8ffffff -> 0xe8000000
- [ 1.232253] advk-pcie d0070000.pcie: IO 0xe9000000..0xe900ffff -> 0xe9000000
- [ 2.239882] advk-pcie d0070000.pcie: link never came up
- [ 2.245408] advk-pcie d0070000.pcie: PCI host bridge to bus 0000:00
- [ 2.251795] pci_bus 0000:00: root bus resource [bus 00-ff]
- [ 2.257435] pci_bus 0000:00: root bus resource [mem 0xe8000000-0xe8ffffff]
- [ 2.264514] pci_bus 0000:00: root bus resource [io 0x0000-0xffff] (bus address [0xe9000000-0xe900ffff])
- [ 3.705920] advk-pcie d0070000.pcie: Posted PIO Response Status: CA, 0xe00 @ 0x0
- [ 3.715611] mv_xor d0060900.xor: Marvell shared XOR driver
- [ 3.738913] mv_xor d0060900.xor: Marvell XOR (Descriptor Mode): ( xor cpy intr )
- [ 3.763909] mv_xor d0060900.xor: Marvell XOR (Descriptor Mode): ( xor cpy intr )
- [ 3.774147] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
- [ 3.782202] cacheinfo: Unable to detect cache hierarchy for CPU 0
- [ 3.789133] brd: module loaded
- [ 3.799270] loop: module loaded
- [ 3.803622] ahci-mvebu d00e0000.sata: AHCI 0001.0300 32 slots 1 ports 6 Gbps 0x1 impl platform mode
- [ 3.812903] ahci-mvebu d00e0000.sata: flags: ncq sntf led only pmp fbs pio slum part sxs
- [ 3.822259] scsi host0: ahci-mvebu
- [ 3.825954] ata1: SATA max UDMA/133 mmio [mem 0xd00e0000-0xd00e1fff] port 0x100 irq 22
- [ 3.838347] random: fast init done
- [ 3.843901] m25p80 spi0.0: w25q32dw (4096 Kbytes)
- [ 3.848694] 3 fixed-partitions partitions found on MTD device spi0.0
- [ 3.855208] Creating 3 MTD partitions on "spi0.0":
- [ 3.860141] 0x000000000000-0x000000180000 : "uboot"
- [ 3.866015] 0x000000180000-0x000000190000 : "ubootenv"
- [ 3.871943] 0x000000190000-0x000000f80000 : "Linux"
- [ 3.876912] mtd: partition "Linux" extends beyond the end of device "spi0.0" -- size truncated to 0x270000
- [ 3.887845] Ethernet Channel Bonding Driver: v3.7.1 (April 27, 2011)
- [ 3.896279] libphy: Fixed MDIO Bus: probed
- [ 3.900671] tun: Universal TUN/TAP device driver, 1.6
- [ 3.906007] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
- [ 3.911941] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
- [ 3.918077] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.4.0-k
- [ 3.925200] igb: Copyright (c) 2007-2014 Intel Corporation.
- [ 3.930969] igbvf: Intel(R) Gigabit Virtual Function Network Driver - version 2.4.0-k
- [ 3.938999] igbvf: Copyright (c) 2009 - 2012 Intel Corporation.
- [ 3.945125] ixgbe: Intel(R) 10 Gigabit PCI Express Network Driver - version 5.1.0-k
- [ 3.952974] ixgbe: Copyright (c) 1999-2016 Intel Corporation.
- [ 3.959111] ixgbevf: Intel(R) 10 Gigabit PCI Express Virtual Function Network Driver - version 4.1.0-k
- [ 3.968632] ixgbevf: Copyright (c) 2009 - 2015 Intel Corporation.
- [ 3.975021] ixgb: Intel(R) PRO/10GbE Network Driver - version 1.0.135-k2-NAPI
- [ 3.982298] ixgb: Copyright (c) 1999-2008 Intel Corporation.
- [ 3.988406] libphy: orion_mdio_bus: probed
- [ 3.993929] mvneta d0030000.ethernet eth0: Using device tree mac address 00:51:82:11:22:00
- [ 4.002459] sky2: driver version 1.30
- [ 4.006615] VFIO - User Level meta-driver version: 0.3
- [ 4.012503] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
- [ 4.019163] ehci-pci: EHCI PCI platform driver
- [ 4.023762] ehci-platform: EHCI generic platform driver
- [ 4.029181] ehci-orion: EHCI orion driver
- [ 4.033390] orion-ehci d005e000.usb: EHCI Host Controller
- [ 4.038892] orion-ehci d005e000.usb: new USB bus registered, assigned bus number 1
- [ 4.047196] orion-ehci d005e000.usb: irq 13, io mem 0xd005e000
- [ 4.059256] orion-ehci d005e000.usb: USB 2.0 started, EHCI 1.00
- [ 4.065416] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.18
- [ 4.073861] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 4.081295] usb usb1: Product: EHCI Host Controller
- [ 4.086311] usb usb1: Manufacturer: Linux 4.18.5-mvebu64 ehci_hcd
- [ 4.092582] usb usb1: SerialNumber: d005e000.usb
- [ 4.097813] hub 1-0:1.0: USB hub found
- [ 4.101622] hub 1-0:1.0: 1 port detected
- [ 4.105957] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
- [ 4.112277] ohci-pci: OHCI PCI platform driver
- [ 4.116886] ohci-platform: OHCI generic platform driver
- [ 4.122600] xhci-hcd d0058000.usb: xHCI Host Controller
- [ 4.127928] xhci-hcd d0058000.usb: new USB bus registered, assigned bus number 2
- [ 4.136284] xhci-hcd d0058000.usb: hcc params 0x0a000998 hci version 0x100 quirks 0x0000000000010010
- [ 4.145671] xhci-hcd d0058000.usb: irq 12, io mem 0xd0058000
- [ 4.147928] ata1: SATA link down (SStatus 0 SControl 300)
- [ 4.151734] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.18
- [ 4.165515] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 4.172952] usb usb2: Product: xHCI Host Controller
- [ 4.177967] usb usb2: Manufacturer: Linux 4.18.5-mvebu64 xhci-hcd
- [ 4.184242] usb usb2: SerialNumber: d0058000.usb
- [ 4.189511] hub 2-0:1.0: USB hub found
- [ 4.193327] hub 2-0:1.0: 1 port detected
- [ 4.197585] xhci-hcd d0058000.usb: xHCI Host Controller
- [ 4.202910] xhci-hcd d0058000.usb: new USB bus registered, assigned bus number 3
- [ 4.211055] xhci-hcd d0058000.usb: Host supports USB 3.0 SuperSpeed
- [ 4.217565] usb usb3: We don't know the algorithms for LPM for this host, disabling LPM.
- [ 4.225940] usb usb3: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 4.18
- [ 4.234383] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 4.241818] usb usb3: Product: xHCI Host Controller
- [ 4.246836] usb usb3: Manufacturer: Linux 4.18.5-mvebu64 xhci-hcd
- [ 4.253107] usb usb3: SerialNumber: d0058000.usb
- [ 4.258266] hub 3-0:1.0: USB hub found
- [ 4.262068] hub 3-0:1.0: 1 port detected
- [ 4.266539] usbcore: registered new interface driver usb-storage
- [ 4.272975] mousedev: PS/2 mouse device common for all mice
- [ 4.278942] i2c /dev entries driver
- [ 4.282619] IR NEC protocol handler initialized
- [ 4.287207] IR RC5(x/sz) protocol handler initialized
- [ 4.292407] IR RC6 protocol handler initialized
- [ 4.297062] IR JVC protocol handler initialized
- [ 4.301720] IR Sony protocol handler initialized
- [ 4.306583] IR SANYO protocol handler initialized
- [ 4.311352] IR Sharp protocol handler initialized
- [ 4.316187] IR MCE Keyboard/mouse protocol handler initialized
- [ 4.322194] IR XMP protocol handler initialized
- [ 4.327375] sdhci: Secure Digital Host Controller Interface driver
- [ 4.333666] sdhci: Copyright(c) Pierre Ossman
- [ 4.338144] sdhci-pltfm: SDHCI platform and OF driver helper
- [ 4.344191] xenon-sdhci d00d0000.sdhci: Got CD GPIO
- [ 4.375278] mmc0: SDHCI controller on d00d8000.sdhci [d00d8000.sdhci] using ADMA
- [ 4.383119] ledtrig-cpu: registered to indicate activity on CPUs
- [ 4.389698] usbcore: registered new interface driver usbhid
- [ 4.395380] usbhid: USB HID core driver
- [ 4.400428] NET: Registered protocol family 10
- [ 4.406113] Segment Routing with IPv6
- [ 4.409942] NET: Registered protocol family 17
- [ 4.414575] Key type dns_resolver registered
- [ 4.419636] registered taskstats version 1
- [ 4.423838] Loading compiled-in X.509 certificates
- [ 4.430517] Btrfs loaded, crc32c=crc32c-generic
- [ 4.437275] d0012000.serial: ttyMV0 at MMIO 0xd0012000 (irq = 0, base_baud = 1562500) is a mvebu-uart
- [ 4.446735] console [ttyMV0] enabled
- [ 4.446735] console [ttyMV0] enabled
- [ 4.454187] bootconsole [ar3700_uart0] disabled
- [ 4.454187] bootconsole [ar3700_uart0] disabled
- [ 4.464531] xenon-sdhci d00d0000.sdhci: Got CD GPIO
- [ 4.498529] mmc1: SDHCI controller on d00d0000.sdhci [d00d0000.sdhci] using ADMA
- [ 4.503775] hctosys: unable to ope[ 4.509897] Freeing unused kernel memory: 640K
- Loading, please wait...
- starting version 232
- [ 4.555827] random: systemd-udevd: uninitialized urandom read (16 bytes read)
- [ 4.561018] random: systemd-udevd: uninitialized urandom read (16 bytes read)
- [ 4.561115] random: udevadm: uninitialized urandom read (16 bytes read)
- [ 4.580448] mmc1: new ultra high speed SDR104 SDHC card at address aaaa
- [ 4.589981] mmcblk1: mmc1:aaaa SL16G 14.8 GiB
- [ 4.602310] mmcblk1: p1
- [ 4.773382] mv88e6085 d0032004.mdio-mii:01: switch 0x3410 detected: Marvell 88E6341, revision 0
- [ 4.816091] libphy: mdio: probed
- [ 5.698774] mv88e6085 d0032004.mdio-mii:01 wan (uninitialized): PHY [!soc!internal-regs@d0000000!mdio@32004!switch0@1!mdio:11] driver [Marvell 88E6390]
- [ 5.774997] mv88e6085 d0032004.mdio-mii:01 lan0 (uninitialized): PHY [!soc!internal-regs@d0000000!mdio@32004!switch0@1!mdio:12] driver [Marvell 88E6390]
- [ 5.849574] mv88e6085 d0032004.mdio-mii:01 lan1 (uninitialized): PHY [!soc!internal-regs@d0000000!mdio@32004!switch0@1!mdio:13] driver [Marvell 88E6390]
- [ 5.864416] DSA: tree 0 setup
- Begin: Loading essential drivers ... done.
- Begin: Running /scripts/init-premount ... done.
- Begin: Mounting root file system ... Begin: Running /scripts/local-top ... done.
- Begin: Running /scripts/local-premount ... Scanning for Btrfs filesystems
- done.
- Begin: Will now check root file system ... fsck from util-linux 2.29.2
- [/sbin/fsck.ext4 (1) -- /dev/mmcblk1p1] fsck.ext4 -a -C0 /dev/mmcblk1p1
- /dev/mmcblk1p1: clean, 36554/75360 files, 266583/301056 blocks
- done.
- [ 6.215368] EXT4-fs (mmcblk1p1): mounted filesystem with writeback data mode. Opts: (null)
- done.
- Begin: Running /scripts/local-bottom ... done.
- Begin: Running /scripts/init-bottom ... done.
- [ 6.551949] systemd[1]: System time before build time, advancing clock.
- [ 6.600802] systemd[1]: systemd 232 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SE)
- [ 6.616983] systemd[1]: Detected architecture arm64.
- Welcome to Debian GNU/Linux 9 (stretch)!
- [ 6.636720] systemd[1]: Set hostname to <espressobin>.
- [ 7.000163] systemd[1]: Reached target Remote File Systems.
- [ OK ] Reached target Remote File Systems.
- [ 7.014016] systemd[1]: Listening on Journal Socket (/dev/log).
- [ OK ] Listening on Journal Socket (/dev/log).
- [ 7.029695] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
- [ OK ] Listening on /dev/initctl Compatibility Named Pipe.
- [ 7.046949] systemd[1]: Listening on Journal Audit Socket.
- [ OK ] Listening on Journal Audit Socket.
- [ 7.063833] systemd[1]: Created slice User and Session Slice.
- [ OK ] Created slice User and Session Slice.
- [ 7.077653] systemd[1]: Listening on fsck to fsckd communication Socket.
- [ OK ] Listening on fsck to fsckd communication Socket.
- [ 7.095030] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
- [ OK ] Started Forward Password Requests to Wall Directory Watch.
- [ OK ] Listening on Journal Socket.
- [ OK ] Created slice System Slice.
- Starting Nameserver information manager...
- [ OK ] Created slice system-serial\x2dgetty.slice.
- Starting Restore / save the current clock...
- Starting Set the console keyboard layout...
- Starting Load Kernel Modules...
- Mounting POSIX Message Queue File System...
- Starting Remount Root and Kernel File Systems...
- [ OK ] Reached target Swap.
- [ OK ] Listening on udev Control Socket.
- [ OK ] Listening on udev Kernel Socket.
- Mounting Huge Pages File System...
- [ 7.294720] EXT4-fs (mmcblk1p1): re-mounted. Opts: commit=600,errors=remount-ro
- Mounting Debug File System...
- [ OK ] Reached target Slices.
- Starting Create list of required st?.|ce nodes for the current kernel...
- [ OK ] Listening on Syslog Socket.
- Starting Journal Service...
- [ OK ] Started Dispatch Password Requests to Console Directory Watch.
- [ OK ] Reached target Paths.
- [ OK ] Reached target Encrypted Volumes.
- [ OK ] Mounted Huge Pages File System.
- [ OK ] Mounted Debug File System.
- [ OK ] Mounted POSIX Message Queue File System.
- [ OK ] Started Restore / save the current clock.
- [ OK ] Started Load Kernel Modules.
- [ OK ] Started Remount Root and Kernel File Systems.
- [ OK ] Started Create list of required sta?.|vice nodes for the current kernel.
- [ OK ] Started Nameserver information manager.
- Starting Create Static Device Nodes in /dev...
- Starting Load/Save Random Seed...
- Starting udev Coldplug all Devices...
- Starting Apply Kernel Variables...
- Mounting Configuration File System...
- [ OK ] Started Journal Service.
- [ OK ] Mounted Configuration File System.
- [ OK ] Started Create Static Device Nodes in /dev.
- [ OK ] Started Load/Save Random Seed.
- [ OK ] Started Apply Kernel Variables.
- Starting udev Kernel Device Manager...
- Starting Flush Journal to Persistent Storage...
- [ OK ] Started Flush Journal to Persistent Storage.
- [ OK ] Started udev Kernel Device Manager.
- [ OK ] Started udev Coldplug all Devices.
- [ OK ] Started Set the console keyboard layout.
- [ OK ] Reached target Local File Systems (Pre).
- Mounting /tmp...
- [ OK ] Mounted /tmp.
- [ OK ] Reached target Local File Systems.
- Starting Set console font and keymap...
- Starting Raise network interfaces...
- Starting Armbian ZRAM config...
- Starting Create Volatile Files and Directories...
- [ OK ] Started Set console font and keymap.
- [ OK ] Started Create Volatile Files and Directories.
- [ OK ] Started Entropy daemon using the HAVEGE algorithm.
- Starting Update UTMP about System Boot/Shutdown...
- [ OK ] Reached target System Time Synchronized.
- [ OK ] Started Update UTMP about System Boot/Shutdown.
- [ OK ] Found device /dev/ttyMV0.
- [ OK ] Started Armbian ZRAM config.
- Starting Armbian memory supported logging...
- [ OK ] Started Raise network interfaces.
- [ OK ] Started Armbian memory supported logging.
- [ OK ] Reached target System Initialization.
- Starting Armbian hardware monitoring...
- [ OK ] Listening on D-Bus System Message Bus Socket.
- [ OK ] Reached target Sockets.
- [ OK ] Started Daily Cleanup of Temporary Directories.
- Starting Armbian hardware optimization...
- [ OK ] Started Daily apt download activities.
- [ OK ] Started Daily apt upgrade and clean activities.
- [ OK ] Reached target Timers.
- Starting Armbian filesystem resize...
- [ OK ] Started Armbian hardware optimization.
- [ OK ] Started Armbian hardware monitoring.
- [ OK ] Started Armbian filesystem resize.
- [ OK ] Reached target Basic System.
- Starting System Logging Service...
- Starting LSB: Start/stop sysstat's sadc...
- Starting LSB: Load kernel modules needed to enable cpufreq scaling...
- [ OK ] Started D-Bus System Message Bus.
- Starting Login Service...
- [ OK ] Started Armbian first run tasks.
- [ OK ] Created slice system-getty.slice.
- [ OK ] Started Regular background program processing daemon.
- Starting Network Manager...
- [ OK ] Started System Logging Service.
- [ OK ] Started LSB: Start/stop sysstat's sadc.
- [ OK ] Started Login Service.
- [ OK ] Started LSB: Load kernel modules needed to enable cpufreq scaling.
- Starting LSB: set CPUFreq kernel parameters...
- [ OK ] Started LSB: set CPUFreq kernel parameters.
- Starting LSB: Set sysfs variables from /etc/sysfs.conf...
- [ OK ] Started LSB: Set sysfs variables from /etc/sysfs.conf.
- [ OK ] Started Network Manager.
- Starting Network Manager Wait Online...
- [ OK ] Reached target Network.
- [ OK ] Started Unattended Upgrades Shutdown.
- Starting OpenBSD Secure Shell server...
- Starting Permit User Sessions...
- [ OK ] Started Permit User Sessions.
- Starting Network Manager Script Dispatcher Service...
- [ OK ] Started Network Manager Script Dispatcher Service.
- [ OK ] Started OpenBSD Secure Shell server.
- Starting Hostname Service...
- [ OK ] Started Hostname Service.
- Starting Authorization Manager...
- [ OK ] Started Network Manager Wait Online.
- [ OK ] Reached target Network is Online.
- Starting LSB: Start NTP daemon...
- Starting LSB: Advanced IEEE 802.11 management daemon...
- Starting /etc/rc.local Compatibility...
- [ OK ] Started LSB: Advanced IEEE 802.11 management daemon.
- [ OK ] Started /etc/rc.local Compatibility.
- [ OK ] Started Getty on tty1.
- [ OK ] Started Serial Getty on ttyMV0.
- [ OK ] Reached target Login Prompts.
- [ OK ] Started Authorization Manager.
- [ OK ] Started LSB: Start NTP daemon.
- [ OK ] Reached target Multi-User System.
- [ OK ] Reached target Graphical Interface.
- Starting Update UTMP about System Runlevel Changes...
- [ OK ] Started Update UTMP about System Runlevel Changes.
- Debian GNU/Linux 9 espressobin ttyMV0
- espressobin login: root
- Password:
- You are required to change your password immediately (root enforced)
- Changing password for root.
- (current) UNIX password:
- Enter new UNIX password:
- Retype new UNIX password:
- _____ _ _
- | ____|___ _ __ _ __ ___ ___ ___ ___ | |__ (_)_ __
- | _| / __| '_ \| '__/ _ \/ __/ __|/ _ \| '_ \| | '_ \
- | |___\__ \ |_) | | | __/\__ \__ \ (_) | |_) | | | | |
- |_____|___/ .__/|_| \___||___/___/\___/|_.__/|_|_| |_|
- |_|
- Welcome to ARMBIAN 5.59 stable Debian GNU/Linux 9 (stretch) 4.18.5-mvebu64
- System load: 1.00 0.31 0.11 Up time: 0 min
- Memory usage: 5 % of 992MB IP:
- Usage of /: 7% of 15G
- [ General system configuration (beta): armbian-config ]
- New to Armbian? Check the documentation first: https://docs.armbian.com
- Thank you for choosing Armbian! Support: www.armbian.com
- Creating a new user account. Press <Ctrl-C> to abort
Add Comment
Please, Sign In to add comment