Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- [2019-06-16 23:07:45] [Output] : ★ George Remington looks over the engine bay looking for the parts that need to be taken out.
- [2019-06-16 23:08:15] [Output] : ★ In the following there would be: The radiator,intake,fuel lines,mounts and the holes belts.. ((George Remington))
- [2019-06-16 23:08:18] [Output] : ★ ...assembly ((George Remington))
- [2019-06-16 23:08:49] [Output] : [English] George Remington says: Alright,first is first,the radiator.
- [2019-06-16 23:09:13] [Output] : ★ George Remington bends over the engine bay holding to the radiator support and looking at it's mounts.
- [2019-06-16 23:09:38] [Output] : ★ You would be able to see that the radiator is held in by two bolts and two coolant lines... ((George Remington))
- [2019-06-16 23:09:49] [Output] : ★ ...one on the upper side and one on the bottom side. ((George Remington))
- [2019-06-16 23:10:08] [Output] : ★ George's bunch of tools would be located on the right side of the lift near the wall. ((George Remington))
- [2019-06-16 23:10:22] [Output] : ★ George Remington makes his way to the tools in order to get the needed ones.
- [2019-06-16 23:10:38] [Output] : ★ George Remington leans over the tools and picks up a pliers,his impact gun and a wrench.
- [2019-06-16 23:10:50] [Output] : ★ George Remington would then make his way back to the engine in order to get the parts out.
- [2019-06-16 23:11:20] [Output] : ★ George Remington puts the impact gun and the wrench on the radiator support,keeping the pliers in his hand
- [2019-06-16 23:12:00] [Output] : ★ You would be able to see that the radiator hoses are held over the lines by two clamps. ((George Remington))
- [2019-06-16 23:12:23] [Output] : ★ George Remington points the upper clamp and reaches it with the pliers,pushing it
- [2019-06-16 23:12:41] [Output] : ★ George Remington would then move the clamp to the back in order to release the hose
- [2019-06-16 23:13:12] [Output] : ★ George Remington then realeases the clamp and drags the line out,letting it hang on the support
- [2019-06-16 23:14:15] [Output] : ★ George Remington then grabs the pliers and sits down on his knees,facing the wall in the front of the car
- [2019-06-16 23:14:34] [Output] : ★ George Remington slowly gets himself on the back dragging under the car
- [2019-06-16 23:15:42] [Output] : ★ George Remington aims the second bottom coolant line with the pliers and grabs it,pushing the pliers in
- [2019-06-16 23:16:08] [Output] : ★ George Remington would then move the clamp down on the hose letting the intake free.
- [2019-06-16 23:16:32] [Output] : ★ George Remington releases the clamp after and grabs his hands on the line,twisting it and taking it out of ..
- [2019-06-16 23:16:35] [Output] : ★ ...the radiator ((George Remington))
- [2019-06-16 23:16:54] [Output] : ★ George Remington then stands up and grabs his impact gun,returning under the car
- [2019-06-16 23:17:19] [Output] : ★ George Remington looks on the radiator for it's two bottom bolts in order to dettach them
- [2019-06-16 23:17:37] [Output] : ★ You would be able to see the two bolts holding the radiator in it's support ((George Remington))
- [2019-06-16 23:17:56] [Output] : ★ George Remington aims the first bolt with the impact gun,starting it up and taking the bolt out
- [2019-06-16 23:18:21] [Output] : ★ George Remington slowly gets the bolts down after and places it on the floor,making the impact's gun way to..
- [2019-06-16 23:18:26] [Output] : ★ ...the opposite bolt. ((George Remington))
- [2019-06-16 23:18:54] [Output] : ★ George Remington places the impact gun on the bolt,taking it slowly out and placing it down.
- [2019-06-16 23:19:21] [Output] : ★ As the bottom of the radiator is now freed,George returns back on top of the engine ((George Remington))
- [2019-06-16 23:19:40] [Output] : ★ George Remington makes his way to the left bolt of the radiator,starting up the impact gun
- [2019-06-16 23:19:56] [Output] : ★ George Remington would slowly get the bolt out,throwing it down near the others two.
- [2019-06-16 23:20:23] [Output] : ★ George Remington then switches the impact gun in his left hand and aims the left bolt,holding the radiator...
- [2019-06-16 23:20:27] [Output] : ★ ...with his right hand ((George Remington))
- [2019-06-16 23:20:49] [Output] : ★ George Remington starts up the impact gun then and slowly gets the bolt out,letting it fall down on the floor
- [2019-06-16 23:21:28] [Output] : ★ George Remington puts the impact gun down on the radiator support after and grabs the radiator in his both..
- [2019-06-16 23:21:35] [Output] : ★ ...hands moving it to the back ((George Remington))
- [2019-06-16 23:21:47] [Output] : ★ George Remington then raises up the radiator,taking it out from the engine bay.
- [2019-06-16 23:22:03] [Output] : ★ George Remington would then make his way to the wall where the tools are and let the radiator down
- [2019-06-16 23:22:19] [Output] : ★ George Remington then returns to the car's engine bay in order to take out the rest of parts.
- [2019-06-16 23:23:26] [Output] : ★ George Remington looks over the engine in order to take a decision on the next parts that need to be removed.
- [2019-06-16 23:23:34] [Output] : [English] George Remington says: Air filters...
- [2019-06-16 23:23:59] [Output] : ★ George Remington puts his both hands on the right air filter's holes draggin it out of the air filter's cover
- [2019-06-16 23:24:29] [Output] : ★ George Remington then drags the hose out harder,taking it out of the engine bay and setting it down on the..
- [2019-06-16 23:24:39] [Output] : ★ ...floor ((George Remington))
- [2019-06-16 23:25:05] [Output] : ★ George Remington looks over the airfilter's cover checking for the bolts holding it in.
- [2019-06-16 23:25:27] [Output] : ★ You would be able to see that four bolts would be holding the hole case to the chassis. ((George Remington))
- [2019-06-16 23:25:59] [Output] : ★ George Remington gets the impact gun in his right hand and aims the first bolt,starting up the tool
- [2019-06-16 23:26:11] [Output] : ★ George Remington would slowly get the bolt out,placing it on the radiator support
- [2019-06-16 23:26:26] [Output] : ★ George Remington then further repeats the process taking out the rest of three remaining bolts
- [2019-06-16 23:26:53] [Output] : ★ George Remington sets the impact gun on the intake and puts his hands on the air filter's case
- [2019-06-16 23:28:04] [Output] : ★ George Remington slowly lifts out the air filter case from the engine bay,placing it down near the hose.
- [2019-06-16 23:28:19] [Output] : ★ George Remington then makes his way to the opposite side of the engine bay in order to remove the second...
- [2019-06-16 23:28:21] [Output] : ★ ...air filter. ((George Remington))
- [2019-06-16 23:29:12] [Output] : ★ George Remington grabs the hose from the bottom end twisting it out from the air filter.
- [2019-06-16 23:29:40] [Output] : ★ George Remington would then lift the hose up and drag it harder,taking it out of the throttle.
- [2019-06-16 23:29:59] [Output] : ★ George Remington grabs the hose in his both hands and throw it near the other two intake parts.
- [2019-06-16 23:30:10] [Output] : [English] George Remington says: Good for trash,you baby are getting sport ones...
- [2019-06-16 23:30:30] [Output] : ★ George Remington then grabs the impact gun and reaches one of the air filter's case bolts
- [2019-06-16 23:30:54] [Output] : ★ George Remington slowly unbolts each of the four and places them all on the radiator support.
- [2019-06-16 23:31:24] [Output] : ★ George Remington then puts the impact gun down on the support puting his both hands on the air filter cover
- [2019-06-16 23:31:39] [Output] : ★ George Remington slides the cover out to the back and then lifts it,throwin it down near the other one.
- [2019-06-16 23:31:57] [Output] : [English] George Remington says: Another trash...right,so now to further proceed,the side engine cover
- [2019-06-16 23:32:20] [Output] : ★ You would notice how a plastic engine cover would be cover the sides of th engine not... ((George Remington))
- [2019-06-16 23:32:28] [Output] : ★ ...letting the chassis exposed for water ((George Remington))
- [2019-06-16 23:32:41] [Output] : ★ George Remington inspects the cover all over searching for it's bolts
- [2019-06-16 23:33:11] [Output] : ★ Eight bolts would be holding the cover,two on the front,two on the back and two on each side ((George Remington))
- [2019-06-16 23:33:49] [Output] : ★ George Remington takes the impact gun up and then makes his way to each bolt,one by one,taking them out
- [2019-06-16 23:34:08] [Output] : ★ After the bolts are taken out,George would let them sit in place not to loose them. ((George Remington))
- [2019-06-16 23:34:26] [Output] : ★ George Remington puts the impact gun down on the radiator support and grabs his hands on the sides of the...
- [2019-06-16 23:34:29] [Output] : ★ ...engine cover ((George Remington))
- [2019-06-16 23:34:45] [Output] : ★ George Remington slowly lifts the plastic cover up,making his way to the wall
- [2019-06-16 23:35:00] [Output] : ★ George Remington throws the cover down on the floor,returning to the car
- [2019-06-16 23:35:05] [Output] : [English] George Remington says: Weight reduction...
- [2019-06-16 23:35:49] [Output] : ★ George Remington inspects the rest of the remaining parts in order to see what's left.
- [2019-06-16 23:36:11] [Output] : [English] George Remington says: Right,so now we have,coils,wires,belts,alternator,ac compressor,power steering...
- [2019-06-16 23:36:20] [Output] : [English] George Remington says: Spark plugs,intake and...
- [2019-06-16 23:36:33] [Output] : [English] George Remington says: Oh fuck,then the transmission and clutch assembly.
- [2019-06-16 23:37:01] [Output] : ★ George Remington takes up the impact gun from the radiator support making it's way to the right fuel line.
- [2019-06-16 23:37:54] [Output] : ★ There would be two bolts holding the fuel line over the injectors,one on the back and one on ((George Remington))
- [2019-06-16 23:37:57] [Output] : ★ ...the front ((George Remington))
- [2019-06-16 23:38:14] [Output] : ★ George Remington gets the impact gun over the front bolt,starting it and slowly taking it out.
- [2019-06-16 23:38:33] [Output] : ★ George Remington then moves to the back one when the front is taken out enough,repeating the process.
- [2019-06-16 23:38:59] [Output] : ★ George Remington then slowly raises up the fuel rail making sure he is not damaging the line and places it...
- [2019-06-16 23:39:08] [Output] : ★ on the back side of the chassis ((George Remington))
- [2019-06-16 23:40:08] [Output] : ★ As the three injectors on the left side would now be exposed,they can be easily taken out ((George Remington))
- [2019-06-16 23:40:40] [Output] : ★ George Remington puts his left hand on the first injector and twists it to the left until it clicks and pops
- [2019-06-16 23:40:42] [Output] : ★ ...up ((George Remington))
- [2019-06-16 23:41:00] [Output] : ★ George Remington would then grab the others two and turn them to the left until they each click
- [2019-06-16 23:41:19] [Output] : ★ After three clicks you would be able to see how the injectors raised up from their holes ((George Remington))
- [2019-06-16 23:41:34] [Output] : ★ George Remington grabs each of the injectors up and slowly places them down on the floor in a row.
- [2019-06-16 23:41:57] [Output] : ★ George Remington then returns to the right side of the engine bay in order to take out the second fuel line
- [2019-06-16 23:42:32] [Output] : ★ George Remington grabs the impact gun in his right hand and makes his way to the front bolt of the fuel line
- [2019-06-16 23:42:51] [Output] : ★ George Remington starts up the impact gun and slowly takes the bolt out enough to let the line free
- [2019-06-16 23:43:14] [Output] : ★ George Remington then takes the impact gun to the back of the line to take the second bolt out.
- [2019-06-16 23:43:37] [Output] : ★ George Remington starts up the gun and slowly unscrews the bolt enough to let the line free
- [2019-06-16 23:43:58] [Output] : ★ George Remington then slowly raises up the line and drags it on the back of the engine bay,letting it support
- [2019-06-16 23:44:01] [Output] : ★ ...on the chassis ((George Remington))
- [2019-06-16 23:44:38] [Output] : ★ As the fuel line is removed,gas dripps and smell would be coming out of the bay. ((George Remington))
- [2019-06-16 23:44:48] [Output] : [English] George Remington says: Smeels like victory to me.
- [2019-06-16 23:46:20] [Output] : ★ George Remington puts the impact gun down on the radiator support after and makes his way to the three...
- [2019-06-16 23:46:27] [Output] : ★ ...remaining injectors ((George Remington))
- [2019-06-16 23:46:44] [Output] : ★ George Remington puts his left hand on each of them,slowly turning them to the left until they each click
- [2019-06-16 23:47:09] [Output] : ★ After three clicks the injectors would pop up of their place letting them free ((George Remington))
- [2019-06-16 23:48:05] [Output] : ★ George Remington then slolwy grabs each of the injectors and places them down on the floor,creating the...
- [2019-06-16 23:48:08] [Output] : ★ ...second row ((George Remington))
- [2019-06-17 00:01:07] [Output] : ★ George Remington would then make his way over the remaining seven bolts,one by one taking them out
- [2019-06-17 00:01:31] [Output] : ★ George Remington then puts the impact gun back on the support and extends his both hands under the intake
- [2019-06-17 00:01:53] [Output] : ★ George Remington grabs the intake with his both hands and raises it up of it's place,keeping the bolts in it
- [2019-06-17 00:02:15] [Output] : ★ George Remington makes his way to the wall in order to let the old intake sit down
- [2019-06-17 00:02:27] [Output] : ★ George Remington sets the intake down and then returns to the engine bay.
- [2019-06-17 00:03:29] [Output] : [English] George Remington says: The following parts are the coils cause it's obvious that they just click out
- [2019-06-17 00:04:07] [Output] : ★ George Remington makes his way to the left side of the engine spotting the three ignition coils.
- [2019-06-17 00:04:42] [Output] : ★ George Remington gets to the first one and pulls it's wire out,dragging it to the back of the bay
- [2019-06-17 00:04:57] [Output] : ★ George Remington then returns to the coil and twists it to the left,lifting it up
- [2019-06-17 00:05:15] [Output] : ★ George Remington takes the coils and puts it down after,near the six injectors
- [2019-06-17 00:06:04] [Output] : ★ George Remington then grabs the second's coil wire and pulls it out,draging it to the back near the other one
- [2019-06-17 00:06:27] [Output] : ★ George Remington returns to the coils after and twists it left,lifting it up
- [2019-06-17 00:06:45] [Output] : ★ George Remington then grabs the coil out of place and puts it down near the other one,standing back up
- [2019-06-17 00:08:16] [Output] : ★ George Remington gets his hands to the third coil,taking it s wire out and placing it to the first two
- [2019-06-17 00:09:44] [Output] : ★ George Remington then twists the coil to the left,lifting it up after
- [2019-06-17 00:10:10] [Output] : ★ George Remington then sets the third coil down and makes his way to the bunch of tools
- [2019-06-17 00:11:11] [Output] : ★ George Remington searches up for the spark plug wrench,picking it up
- [2019-06-17 00:11:21] [Output] : ★ George Remington would then make his way back to the engine bay
- [2019-06-17 00:12:38] [Output] : ★ George Remington places the wrench over the first spark plug,locking it over the plug
- [2019-06-17 00:13:10] [Output] : ★ George Remington then puts his both hands on the wrench's handle and starts twisting it to the left
- [2019-06-17 00:13:31] [Output] : ★ As the wrench is twisted,the first spark plug would come out staying in the wrench ((George Remington))
- [2019-06-17 00:14:12] [Output] : ★ George Remington grabs the spark plug with his left hand and takes it out of the wrench,placing it down on...
- [2019-06-17 00:14:18] [Output] : ★ ...the radiator support. ((George Remington))
- [2019-06-17 00:15:26] [Output] : ★ George Remington then heads to the second spark plug,placing the wrench on the top of it
- [2019-06-17 00:15:49] [Output] : ★ George Remington would slowly turn the wrench to the left,taking out the spark plug and placing it on the...
- [2019-06-17 00:15:53] [Output] : ★ ...radiator support ((George Remington))
- [2019-06-17 00:17:38] [Output] : ★ George Remington then gets the wrench over the third spark plug and twists it to the left,taking the plug out
- [2019-06-17 00:17:58] [Output] : ★ George Remington then lifts up the wrench and takes the plug out of it,placing them both on the support
- [2019-06-17 00:18:47] [Output] : ★ George Remington then gets his arm to the right side of the engine where the ignition coils would be located
- [2019-06-17 00:19:10] [Output] : ★ George Remington pulls the three wires powering the coils out of them and puts them all on top of the others.
- [2019-06-17 00:19:33] [Output] : ★ George Remington then puts his left hand on the first coil and his right hand on the second
- [2019-06-17 00:19:55] [Output] : ★ George Remington would twists them both to the left lifting them up and placing them on the floor
- [2019-06-17 00:20:27] [Output] : ★ George Remington then heads back up to the third ignition coil,also twisting it to the left
- [2019-06-17 00:20:46] [Output] : ★ George Remington then raises up the coil and makes it's way down near the rest of five.
- [2019-06-17 00:21:02] [Output] : ★ George Remington stands up back after and takes the spark plug wrench in his way
- [2019-06-17 00:21:24] [Output] : ★ George Remington puts the wrench over the first spark plug's top and starts twisting it to the left.
- [2019-06-17 00:22:14] [Output] : ★ George Remington then lifts up the wrench with the plug staying it in and puts it on the radiator support
- [2019-06-17 00:22:24] [Output] : ★ George Remington takes out the plug and then heads to the second spark plug
- [2019-06-17 00:22:38] [Output] : ★ George Remington positions the wrench over it and twists it to the left taking the spark plug out
- [2019-06-17 00:22:55] [Output] : ★ George Remington places the plug near the other four and returns to the last one
- [2019-06-17 00:23:50] [Output] : ★ George Remington positions the wrench over the last spark plug and starts twisting it to the left,lifting it
- [2019-06-17 00:23:53] [Output] : ★ ...up from it's place ((George Remington))
- [2019-06-17 00:24:34] [Output] : ★ George Remington then grabs the spark plug out of the wrench and places them both down on the radiator suppor
- [2019-06-17 00:24:38] [Output] : George Remington: (( support* ))
- [2019-06-17 00:25:07] [Output] : ★ George Remington then looks over to the front side of the engine,looking at the belts and their rotating...
- [2019-06-17 00:25:10] [Output] : ★ ...assembly. ((George Remington))
- [2019-06-17 00:25:39] [Output] : ★ You would be able to notice the AC compressor,the alternator and the power steering pump on. ((George Remington))
- [2019-06-17 00:25:47] [Output] : ★ ...the opposite side of the engine ((George Remington))
- [2019-06-17 00:26:13] [Output] : ★ George Remington looks over the power steering pump,noticing it's line tightened down by a washer
- [2019-06-17 00:27:45] [Output] : ★ George Remington grabs up his wrench and then leans over the engine bay to the power steering line.
- [2019-06-17 00:28:31] [Output] : ★ George Remington starts twisting the washer to the left,then raising up the line
- [2019-06-17 00:28:47] [Output] : ★ George Remington gets the line to the left then,making it sit in a secure position.
- [2019-06-17 00:29:11] [Output] : ★ George Remington then makes his way to the AC compressor in order to remove it's two lines
- [2019-06-17 00:29:32] [Output] : ★ George Remington leans over the bay and puts the wrench over the first line's washer,positioning it
- [2019-06-17 00:30:33] [Output] : ★ George Remington slowly starts twisting the washer to the left,dettaching the first line from the compressor.
- [2019-06-17 00:30:53] [Output] : ★ George Remington then takes the wrench to the second's line washer,positioning it over
- [2019-06-17 00:31:12] [Output] : ★ George Remington then starts slowly twisting the wrench to the left,loosening up the washer
- [2019-06-17 00:31:55] [Output] : ★ George Remington then returns to the radiator's support and puts the wrench on it
- [2019-06-17 00:32:13] [Output] : ★ George Remington would then get the the lift's remote attached to his belt in his right hand
- [2019-06-17 00:32:49] [Output] : ★ George Remington uses the top button of the remote and slowly raises up the lift to get the car worked on.
- [2019-06-17 00:34:28] [Output] : ★ George Remington makes his way to the front of the car after in order to remove the belts components
- [2019-06-17 00:34:48] [Output] : ★ George Remington extends his arm up to the radiator support and grabs his impact gun.
- [2019-06-17 00:35:37] [Output] : ★ George Remington then slowly walks to the front of the engine locating the alternator's roller
- [2019-06-17 00:36:04] [Output] : ★ George Remington puts the impact gun on the roller's bolt and starts taking it out,loosening the belts.
- [2019-06-17 00:37:17] [Output] : ★ George Remington puts his hand on the roller after and slides it out of it's place,dragging it out.
- [2019-06-17 00:37:31] [Output] : ★ George Remington then pockets up the roller and proceeds to the next step.
- [2019-06-17 00:38:17] [Output] : ★ George Remington makes his way to the side of the alternator in order to dettach the two bolts holding it to
- [2019-06-17 00:38:23] [Output] : ★ ...the engine block ((George Remington))
- [2019-06-17 00:39:25] [Output] : ★ George Remington puts his right hand over the alternator and then gets the impact gun to it's first bolt.
- [2019-06-17 00:39:48] [Output] : ★ George Remington slowly unscrews the bolt and proceeds to the second one once done
- [2019-06-17 00:40:18] [Output] : ★ George Remington slowly unbolts the second bolt from it's place and slides the alternator out of it's place
- [2019-06-17 00:40:56] [Output] : ★ George Remington grabs the alternator in his hands and puts it down on the floor on the right side of the car
- [2019-06-17 00:41:14] [Output] : ★ George Remington stands back up after in order to remove the ac compressor from the engine
- [2019-06-17 00:41:36] [Output] : ★ George Remington holds the compressor with his right hand and starts unbolting the two bolts,one by one using
- [2019-06-17 00:41:40] [Output] : ★ ...his impact gun ((George Remington))
- [2019-06-17 00:42:05] [Output] : ★ George Remington then slowly slides the compressor out of place,keeping it in his hands
- [2019-06-17 00:42:21] [Output] : ★ George Remington puts the compressor down near the alternator after,returning back to the engine
- [2019-06-17 00:50:43] [Output] : ★ George Remington moves himself to the opposite side of the engine in order to take out the power steering pum
- [2019-06-17 00:51:02] [Output] : ★ George Remington puts the impact gun on the pump's roller bolt and starts it up
- [2019-06-17 00:51:15] [Output] : ★ George Remington slowly removes the bolt and the roller,pocketing them soon
- [2019-06-17 00:51:39] [Output] : ★ You would now be able to notice how the two serpentine bolts would be loosened up and... ((George Remington))
- [2019-06-17 00:51:42] [Output] : ★ ...hanging. ((George Remington))
- [2019-06-17 00:53:28] [Output] : ★ George Remington makes his way to the side of the power steering pump in order to dettach it's two bolts.
- [2019-06-17 00:57:46] [Output] : ★ George Remington holds the pump in place with his right hand,holding the impact gun in his left
- [2019-06-17 00:58:05] [Output] : ★ George Remington then proceeds to dettaching the two bolts holding the pump to the block with his impact gun
- [2019-06-17 00:58:28] [Output] : ★ George Remington slowly removes the pump after by sliding it backwards and keeping it in his both hands
- [2019-06-17 01:00:20] [Output] : ★ George Remington then makes his way to the alternator and compressor in order to let the pump sit
- [2019-06-17 01:00:34] [Output] : ★ George Remington puts the pump down and makes his way to the back of the gearbox
- [2019-06-17 01:02:47] [Output] : ★ George Remington looks over the driveshaft searching for the bolts holding it to the gearbox,middle and...
- [2019-06-17 01:02:51] [Output] : ★ ...differential ((George Remington))
- [2019-06-17 01:03:19] [Output] : ★ There would be four bolts at the front,four at the back and two holding up the driveshaft.. ((George Remington))
- [2019-06-17 01:03:21] [Output] : ★ ...bearing ((George Remington))
- [2019-06-17 01:05:38] [Output] : ★ George Remington grabs the impact gun and raises up his hands to the front bolts,holding the driveshaft in...
- [2019-06-17 01:05:41] [Output] : ★ ...the gearbox ((George Remington))
- [2019-06-17 01:07:00] [Output] : ★ George Remington positions the impact gun over one of the bolts and starts unscrewing them all four one by...
- [2019-06-17 01:07:01] [Output] : ★ ...one ((George Remington))
- [2019-06-17 01:07:27] [Output] : ★ George Remington then pockets up the bolts and lets the front of the shaft hang,making his way to the back
- [2019-06-17 01:08:26] [Output] : ★ George Remington puts the impact gun on one of the bolts and starts taking it out,pocketing it
- [2019-06-17 01:08:45] [Output] : ★ George Remington would then repeat the process for the other three bolts,pocketing them up as well.
- [2019-06-17 01:09:12] [Output] : ★ George Remington then removes the driveshaft from the differential and lets it's backside hang in the air.
- [2019-06-17 01:09:25] [Output] : ★ George Remington would then finally make his way to the center bearing in order to remove it's two bolts
- [2019-06-17 01:09:59] [Output] : ★ George Remington starts up the impact gun and starts removing the two bolts while holding the shaft with his.
- [2019-06-17 01:10:02] [Output] : ★ ...right hand ((George Remington))
- [2019-06-17 01:10:17] [Output] : ★ George Remington would then slowly lower down the driveshaft and let it sit on the floor.
- [2019-06-17 01:10:34] [Output] : ★ George Remington then punches the old driveshaft with his right foot,rotating it to the side of the lift
- [2019-06-17 01:11:00] [Output] : ★ George Remington then uses the remote in order to lower down the lift by pressing it's bottom button
- [2019-06-17 01:29:56] [Output] : ★ You would now be able to see the two serpentine belts only holding to the water pump and the ((George Remington))
- [2019-06-17 01:30:00] [Output] : ★ ...five idle rollers ((George Remington))
- [2019-06-17 01:31:04] [Output] : ★ George Remington grabs up the first belt and slides it to the front,then removing it from the bay
- [2019-06-17 01:31:19] [Output] : ★ George Remington then bends the belt in half and puts it down at the front side of the car
- [2019-06-17 01:31:35] [Output] : ★ George Remington would then return back up in the engine bay in order to remove the second belt.
- [2019-06-17 01:31:51] [Output] : ★ George Remington drags the second belt to the front and then lifts it up removing it from the engine bay.
- [2019-06-17 01:33:22] [Output] : ★ George Remington would then bend the belt in half and place it down near the first one
- [2019-06-17 01:33:39] [Output] : ★ George Remington then grabs up his impact gun and makes his way to the water pump
- [2019-06-17 01:34:01] [Output] : ★ You would be able to see how the water pump is hold on the timing cover with two side bolts ((George Remington))
- [2019-06-17 01:34:20] [Output] : ★ George Remington starts up the impact gun and removes the two bolts,one by one while holding the pump in his
- [2019-06-17 01:34:23] [Output] : ★ ...other hand. ((George Remington))
- [2019-06-17 01:35:50] [Output] : ★ George Remington then slowly removes the pump out of it's place as he is taking the impact gun out
- [2019-06-17 01:36:11] [Output] : ★ George Remington would then make his way to the alternator and place the water pump near it,returning to the
- [2019-06-17 01:36:15] [Output] : ★ ...front of the engine ((George Remington))
- [2019-06-17 01:36:42] [Output] : ★ George Remington starts up the impact gun again and removes the bolt holding the first roller in place
- [2019-06-17 01:37:04] [Output] : ★ George Remington would then pocket up the roller and follow the same steps,removing the other four rollers
- [2019-06-17 02:04:42] [Output] : ★ George Remington the checks the whole engine bay taking out all the wires powering the electronics.
- [2019-06-17 02:05:04] [Output] : ★ George Remington grabs up his wrench from the radiator support and makes his way to the trunk
- [2019-06-17 02:05:26] [Output] : ★ George Remington pulls the trunk's handle up and raises it,making it stand on it's arms.
- [2019-06-17 02:06:03] [Output] : ★ The car's battery would be sitting in the right side of the trunk with the two cables... ((George Remington))
- [2019-06-17 02:06:06] [Output] : ★ ...leading to it ((George Remington))
- [2019-06-17 02:06:43] [Output] : ★ George Remington aims the wrench to the negative pole and starts untightening the cable,letting it sit in the
- [2019-06-17 02:06:45] [Output] : ★ ..trunk ((George Remington))
- [2019-06-17 02:07:04] [Output] : ★ George Remington would then repeat the process also taking out the positive cable of the battery
- [2019-06-17 02:07:15] [Output] : ★ George Remington then shuts the trunk down and returns to the engine bay
- [2019-06-17 02:08:35] [Output] : ★ George Remington inspects the engine bay all over looking for the next parts that need to be taken out
- [2019-06-17 02:10:16] [Output] : [English] George Remington says: Exhaust manifolds,both need to be taken off and then the transmission.
- [2019-06-17 02:10:19] [Output] : [English] George Remington says: Oh,axles also...
- [2019-06-17 02:11:05] [Output] : ★ George Remington reaches the remote attached to his belt and pushes it's upper button raising the lift up
- [2019-06-17 02:12:27] [Output] : ★ With the car now raised up,the eight bolts holding the manifolds to the block and the two... ((George Remington))
- [2019-06-17 02:12:40] [Output] : ★ ...holding them to the exhaust pipes would be visible ((George Remington))
- [2019-06-17 02:13:57] [Output] : ★ George Remington extends his left arm along with the impact gun to the back of the left exhaust manifold..
- [2019-06-17 02:14:22] [Output] : ★ George Remington would then start unscrewing the two bolts,pocketing them after.
- [2019-06-17 02:14:48] [Output] : ★ George Remington places his right hand on the manifold and then starts unscrewing the eight bolts one by one
- [2019-06-17 02:15:03] [Output] : ★ George Remington would then lower down the pipe,taking it to the left side of the car
- [2019-06-17 02:15:27] [Output] : ★ George Remington puts the manifold down and further returns to the second one in order to get it dettached
- [2019-06-17 02:16:16] [Output] : ★ George Remington extends his left arm to the back bolts of the manifold and starts taking out the two bolts
- [2019-06-17 02:16:29] [Output] : ★ George Remington would then pocket up the two bolts,further moving up to the front ones
- [2019-06-17 02:17:03] [Output] : ★ George Remington places his right hand on the manifold,sustaining it and starts unscrewing the rest of bolts.
- [2019-06-17 02:17:11] [Output] : ★ ...pocketing them up ((George Remington))
- [2019-06-17 02:17:36] [Output] : ★ George Remington then places his both hands on the manifold and slowly lowers it down,making his way to the..
- [2019-06-17 02:17:39] [Output] : ★ ...other one ((George Remington))
- [2019-06-17 02:17:56] [Output] : ★ George Remington places down the manifold after and makes his way under the car
- [2019-06-17 12:11:31] [Output] : ★ George Remington approaches to the front left wheel with his impact gun in his right hand
- [2019-06-17 12:11:48] [Output] : ★ George Remington starts up the impact gun and further dettaches all the five lugnuts in a row,pocketing them
- [2019-06-17 12:12:01] [Output] : ★ George Remington would then slide the wheel out of it's hub,placing it down on the floor
- [2019-06-17 12:13:07] [Output] : ★ George Remington sits down on his knees after to better approach the axle placed in the middle of the knuckle
- [2019-06-17 12:13:49] [Output] : ★ You would be able to see that the axle is held in by a safety pin and a crown bolt ((George Remington))
- [2019-06-17 12:14:31] [Output] : ★ George Remington uses the top side of the impact gun and starts hitting the safety pin until it gets out.
- [2019-06-17 12:14:49] [Output] : ★ After a few hits,you would be able to see parts of the pin flying out of the axle ((George Remington))
- [2019-06-17 12:15:18] [Output] : ★ George Remington then positions the impact gun over the crown bolt in order to get it out
- [2019-06-17 12:15:39] [Output] : ★ George Remington starts up the impact gun and slowly unscrews the bolt,pocketing it after
- [2019-06-17 12:17:37] [Output] : ★ You would be able to see that the axle is loosened up enough to get it hammered out of the.. ((George Remington))
- [2019-06-17 12:17:41] [Output] : ★ ...knuckle ((George Remington))
- [2019-06-17 12:17:53] [Output] : ★ George Remington stands up and heads to his bunch of tools in order to pick up a hammer
- [2019-06-17 12:18:16] [Output] : ★ George Remington leans over the tools and picks up a medium sized hammer,returning to the car
- [2019-06-17 12:18:38] [Output] : ★ George Remington puts his impact gun down on the floor,grabing the hammer in his right hand.
- [2019-06-17 12:20:37] [Output] : ★ George Remington would then start hammering the axle out of the knuckle applying medium pressure.
- [2019-06-17 12:22:01] [Output] : ★ After a few hammer hits,you would be able to see the axle dropping from the knuckle on the.. ((George Remington))
- [2019-06-17 12:22:05] [Output] : ★ ...lift's ramp ((George Remington))
- [2019-06-17 12:24:33] [Output] : ★ George Remington places the hammer down near the impact gun and then places his hands behind the knuckle...
- [2019-06-17 12:25:07] [Output] : ★ ...grabbing the axle with his both hands. ((George Remington))
- [2019-06-17 12:25:33] [Output] : ★ George Remington would then slowly drag the axle out of the gearbox,placing it down on the floor
- [2019-06-17 12:27:13] [Output] : ★ George Remington steps up after and makes his way to the opposite side of the car
- [2019-06-17 12:27:37] [Output] : ★ George Remington would then return and pick up his tools,further going back to the next wheel
- [2019-06-17 12:32:00] [Output] : ★ George Remington places the hammer down on the floor and returns to the wheel,placing the impact gun in his.
- [2019-06-17 12:32:02] [Output] : ★ ...hands ((George Remington))
- [2019-06-17 12:32:28] [Output] : ★ George Remington then starts unscrewing all of the five lugnuts in a row,pocketing them
- [2019-06-17 12:34:51] [Output] : ★ George Remington would then grab the wheel in his both hands,sliding it out of the hub
- [2019-06-17 12:35:15] [Output] : ★ George Remington then places the wheel down on the floor and further returns to the hub
- [2019-06-17 12:36:36] [Output] : ★ George Remington uses the top of the impact gun after and starts hitting the safety pin until it gets out
- [2019-06-17 12:37:10] [Output] : ★ After a few hits,you would be able to see how the safety pin flyes out of the hub on the... ((George Remington))
- [2019-06-17 12:37:12] [Output] : ★ ...ground ((George Remington))
- [2019-06-17 12:38:00] [Output] : ★ George Remington then positions the impact gun over the crown bolt and starts it up,taking the bolt out
- [2019-06-17 12:38:41] [Output] : ★ George Remington would further pocket up the crownbolt and place the impact gun down
- [2019-06-17 12:39:06] [Output] : ★ George Remington grabs the hammer in his right hand and aims the top of the axle in order to hammer it out
- [2019-06-17 12:40:43] [Output] : ★ George Remington slowly hammers the old axle out,aplying medium pressure to it in order to take it out
- [2019-06-17 12:41:30] [Output] : ★ After a few hammer hits,you would be able to see that the axle gets out of the hub,falling.. ((George Remington))
- [2019-06-17 12:41:37] [Output] : ★ ...on the ramp of the lift ((George Remington))
- [2019-06-17 12:42:30] [Output] : ★ George Remington puts the hammer down on the floor and slides his arm behind the knuckle
- [2019-06-17 12:43:41] [Output] : ★ George Remington then grabs the axle in his both hands and slowly drags it out,placing it on the floor.
- [2019-06-17 12:46:48] [Output] : ★ George Remington stands up after and makes his way to the front of the lift.
- [2019-06-17 12:48:21] [Output] : ★ George Remington grabs up the lift's remote from the belt,using it's bottom button to lower the lift all the.
- [2019-06-17 12:48:26] [Output] : ★ ..way down ((George Remington))
- [2019-06-17 12:48:57] [Output] : * George Remington presses the button on the ramp controls lowering the car lift. *
- [2019-06-17 12:50:03] [Output] : ★ George Remington then steps into the car grabing his impact gun in his way
- [2019-06-17 12:50:24] [Output] : ★ George Remington puts the impact gun down on the passenger's side and stars removing the shifter
- [2019-06-17 12:50:44] [Output] : ★ George Remington grabs the shifter knob in his right hand and starts twisting it to the left to loosen it
- [2019-06-17 12:51:02] [Output] : ★ After the knob is rotated a few times,you would be able to see that it came out all the way ((George Remington))
- [2019-06-17 12:51:38] [Output] : ★ George Remington then grabs the knob and places it on the seat,proceeding to the next step
- [2019-06-17 12:52:09] [Output] : ★ George Remington grabs up the plastic cover holding the shifter's leather and slides it up until it's clamps.
- [2019-06-17 12:52:11] [Output] : ★ ...click ((George Remington))
- [2019-06-17 12:52:36] [Output] : ★ George Remington then places the plastic on the seat as well moving up to the next step
- [2019-06-17 12:52:59] [Output] : ★ With the shifter itself now exposed,you would be able to see two handles,one holding to... ((George Remington))
- [2019-06-17 12:53:10] [Output] : ★ ...another,and the second one going into the gearbox. ((George Remington))
- [2019-06-17 12:53:50] [Output] : [English] George Remington ((In Car)) says: Right,as the Lambo,only need to take out the bottom side and it all comes out
- [2019-06-17 12:55:59] [Output] : ★ George Remington takes up his impact gun and moves to the bottom bolts of the shifter,further detaching them.
- [2019-06-17 12:56:23] [Output] : ★ George Remington then grabs the handle and slides it out of place,puting it on the floor mat in the passenger
- [2019-06-17 12:56:28] [Output] : ★ ...'s side ((George Remington))
- [2019-06-17 12:59:21] [Output] : ★ George Remington then returns to the shifter's base in order to take out the rest of the assembly.
- [2019-06-17 12:59:57] [Output] : ★ The last part holding the gearbox to the car's interior would be the metal plate that holds. ((George Remington))
- [2019-06-17 13:00:01] [Output] : ★ ...in by four bolts ((George Remington))
- [2019-06-17 13:00:41] [Output] : ★ George Remington grabs the impact gun in his right hand while holding the left one to the plate and starts...
- [2019-06-17 13:00:54] [Output] : ★ ...unscrewing the four bolts,one by one,letting them sit in the holes ((George Remington))
- [2019-06-17 13:01:07] [Output] : ★ George Remington then lifts up the plate and places it down near the shifter handle
- [2019-06-17 13:02:11] [Output] : ★ George Remington then opens up the door and steps out of the car with the impact gun in his hand.
- [2019-06-17 13:05:33] [Output] : ★ George Remington grabs up the remote and then uses it's upper button to raise the lift up all the way.
- [2019-06-17 13:05:39] [Output] : * George Remington presses the button on the ramp controls raising the car lift. *
- [2019-06-17 13:06:01] [Output] : ★ George Remington then makes his way to the main office in order to pick up two empty pans
- [2019-06-17 13:07:49] [Output] : ★ George Remington gets under the desk and slides out two empty pans,returning to the car.
- [2019-06-17 13:09:12] [Output] : ★ George Remington puts the two pans down and slides them one under the oil pan and one under the gearbox
- [2019-06-17 13:09:27] [Output] : ★ George Remington then extends his arms to the car's oil pan in order to drain all the oil out
- [2019-06-17 13:10:10] [Output] : ★ George Remington puts the impact gun on the drain bolt of the oil pan and starts it up,removing the bolt.
- [2019-06-17 13:10:32] [Output] : ★ As the bolt is unscrewed,you would be able to see how all the oil drains directly into the.. ((George Remington))
- [2019-06-17 13:10:34] [Output] : ★ ...pan ((George Remington))
- [2019-06-17 13:10:58] [Output] : ★ George Remington then pockets up the drain bolt and proceeds to the next four
- [2019-06-17 13:11:16] [Output] : ★ After all the oil drains out of the engine block,George would be further able to work ((George Remington))
- [2019-06-17 13:11:35] [Output] : ★ George Remington puts his left hand on the oil pan and starts up the impact gun removing the four bolts...
- [2019-06-17 13:11:47] [Output] : ★ ...holding the pan,one by one and pocketing them after. ((George Remington))
- [2019-06-17 13:12:08] [Output] : ★ George Remington would then puts his both hands on the pan and then would slowly lower in down.
- [2019-06-17 13:12:27] [Output] : ★ George Remington makes his way to the wall with the pan in his both hands in order to let it down
- [2019-06-17 13:12:59] [Output] : ★ George Remington puts the oil pan down after and returns under the gearbox
- [2019-06-17 13:13:48] [Output] : ★ George Remington reaches up the gearbox's drain bolt and places the impact gun on it
- [2019-06-17 13:14:04] [Output] : ★ George Remington then slowly removes the bolt,letting the oil come out and pockets it up
- [2019-06-17 13:14:33] [Output] : ★ After all the oil seems to be taken out,it would be safe to work on the rest of the gearbox ((George Remington))
- [2019-06-17 13:15:47] [Output] : ★ You would be able to see that the gearbox holds to the engine in eight bolts and two bolts.. ((George Remington))
- [2019-06-17 13:15:54] [Output] : ★ ...on it's rear mount holding to the chassis ((George Remington))
- [2019-06-17 13:16:35] [Output] : ★ George Remington slowly pushes the two oil pans with his right foot making room for the wooden pallet and the
- [2019-06-17 13:16:37] [Output] : ★ ...jackstand ((George Remington))
- [2019-06-17 13:17:09] [Output] : ★ George Remington takes up the wooden pallet in his hand and makes his way back to the gearbox
- [2019-06-17 13:17:42] [Output] : ★ George Remington then makes his way to the bunch of tools in order to pick up the jack
- [2019-06-17 13:18:00] [Output] : ★ George Remington takes the jack up and further returns to the car in order to lift the pallet up
- [2019-06-17 13:24:26] [Output] : ★ George Remington slides the jack under the pallet and slowly starts lifting it up using it's lever
- [2019-06-17 13:24:45] [Output] : ★ After several pulls to the lever,the pallet would hit the gearbox,sustaining it. ((George Remington))
- [2019-06-17 13:25:42] [Output] : ★ George Remington then takes up the impact gun and locates the dust shield covering the clutch cable
- [2019-06-17 13:25:58] [Output] : ★ You would be able to see the shield on the left side of the gearbox held in by two bolts ((George Remington))
- [2019-06-17 13:26:22] [Output] : ★ George Remington places his left hand on the shield and then starts up unscrewing the two bolts using the...t
- [2019-06-17 13:26:27] [Output] : ★ ...impact gun ((George Remington))
- [2019-06-17 13:27:02] [Output] : ★ George Remington then slides the shield out and places it down near the lift's pillar.
- [2019-06-17 13:27:16] [Output] : ★ George Remington returns to the exposed clutch cable after in order to pop it out
- [2019-06-17 13:27:39] [Output] : ★ You would be able to see that the cable is only held in by a washer that need a wrench. ((George Remington))
- [2019-06-17 13:29:32] [Output] : ★ George Remington gets out from under the car and extends his left hand to the radiator support taking up his.
- [2019-06-17 13:29:35] [Output] : ★ ...wrench ((George Remington))
- [2019-06-17 13:31:26] [Output] : ★ George Remington then returns under the gearbox in order to take the clutch cable out
- [2019-06-17 13:32:20] [Output] : ★ George Remington holds the cable with his left hand and then positions the wrench on the washer
- [2019-06-17 13:32:41] [Output] : ★ George Remington would then slowly turn the wrench to the left,taking the cable out of the gearbox
- [2019-06-17 13:32:56] [Output] : ★ George Remington then grabs the cable out and ties it around the chassis.
- [2019-06-17 13:33:15] [Output] : ★ George Remington then further makes his way to the reverse lights sensor in order to disconnect it
- [2019-06-17 13:33:41] [Output] : ★ George Remington pulls the sensor's wire out and places it around the chassis,making his way to the rear...
- [2019-06-17 13:33:45] [Output] : ★ ...mount after ((George Remington))
- [2019-06-17 13:34:37] [Output] : ★ George Remington throws the wrench near the lift's pillar and keeps the impact gun only in his hand
- [2019-06-17 13:35:38] [Output] : ★ George Remington then extends his hands to the rear mount and starts up the impact gun further unbolting the.
- [2019-06-17 13:35:45] [Output] : ★ ...two bolts holding the mount to the chassis ((George Remington))
- [2019-06-17 13:35:59] [Output] : ★ George Remington pockets up the two bolts after and moves to the front of the gearbox
- [2019-06-17 13:36:47] [Output] : ★ George Remington gets his hands to the eight front bolts and starts slowly unbolting them each in a star...
- [2019-06-17 13:36:56] [Output] : ★ ...pattern to evenly realease the pressure ((George Remington))
- [2019-06-17 13:37:14] [Output] : ★ George Remington pockets up the bolts after and makes his way to the jack in order to slide the gearbox out
- [2019-06-17 13:37:54] [Output] : ★ George Remington grabs the jackstand's lever and slowly pulls it to the back,sliding the gearbox out of it's
- [2019-06-17 13:37:55] [Output] : ★ ...place ((George Remington))
- [2019-06-17 13:38:47] [Output] : ★ George Remington then slowly lowers the jack using it's lever and lowers the gearbox all the way to the...
- [2019-06-17 13:38:50] [Output] : ★ ...floor ((George Remington))
- [2019-06-17 13:39:18] [Output] : ★ George Remington then uses then slowly pushes the gearbox in a safe place using the jackstand's wheels
- [2019-06-17 14:11:18] [Output] : ★ George Remington makes his way to the bunch of tools in order to pick up the bearing wrench
- [2019-06-17 14:11:35] [Output] : ★ George Remington leans over to the tools and picks up his wrench returning to the clutch
- [2019-06-17 14:12:46] [Output] : ★ George Remington pockets up the wrench and then takes the impact gun,making it's way to the pressure plate
- [2019-06-17 14:13:06] [Output] : ★ You would be able to see that the clutch pressure plate has six bolts holding it to the... ((George Remington))
- [2019-06-17 14:13:09] [Output] : ★ ...flywheel ((George Remington))
- [2019-06-17 14:13:43] [Output] : ★ George Remington places his left hand on the plate,holding it and starts up the impact gun,slowly removing...
- [2019-06-17 14:13:51] [Output] : ★ ...all the bolts in a star pattern ((George Remington))
- [2019-06-17 14:14:11] [Output] : ★ George Remington would pocket up the bolts after and place his both hands on the pressure plate to slide it..
- [2019-06-17 14:14:29] [Output] : ★ ...out of it's place ((George Remington))
- [2019-06-17 14:14:52] [Output] : ★ George Remington slides the plate back of the flywheel and makes his way to the oil pan
- [2019-06-17 14:15:13] [Output] : ★ George Remington places the pressure plate near the oilpan and further returns to the clutch plat
- [2019-06-17 14:15:16] [Output] : George Remington: (( plate* ))
- [2019-06-17 14:16:40] [Output] : ★ George Remington unpockets the bearing wrench and inserts it in the clutch center bearing,positioning it
- [2019-06-17 14:17:21] [Output] : ★ George Remington then uses the wrenche's handle and twists it to the right in order to make the clamps grab..
- [2019-06-17 14:17:26] [Output] : ★ ...the bearing's inside ((George Remington))
- [2019-06-17 14:17:54] [Output] : ★ After the bearing is secured in the wrenche's clamps,George would be able to pull it out ((George Remington))
- [2019-06-17 14:18:22] [Output] : ★ George Remington pulls the wrench back carefully being careful not to damage it and then puts it down...
- [2019-06-17 14:18:26] [Output] : ★ ...near the lift's pillar ((George Remington))
- [2019-06-17 14:18:38] [Output] : ★ George Remington further returns to the clutch plate in order to take it out.
- [2019-06-17 14:19:01] [Output] : ★ George Remington places his hands in the middle hole of the plate and slowly slide the clutch plate out of...
- [2019-06-17 14:19:09] [Output] : ★ ...the flywheel,keeping it in his hands ((George Remington))
- [2019-06-17 14:19:38] [Output] : ★ George Remington would then make his way to the lift's pillar in order to place the plate down
- [2019-06-17 14:20:44] [Output] : ★ George Remington then returns back to the flywheel and checks for the bolts holding it into the block
- [2019-06-17 14:21:09] [Output] : ★ You would be able to see eight bolts holding the flywheel,two on each side. ((George Remington))
- [2019-06-17 14:21:29] [Output] : ★ George Remington puts his left hand on the flywheel pushing it to sustain it's weight.
- [2019-06-17 14:21:52] [Output] : ★ George Remington further extends his right arm to the bolts with his impact gun and starts dettaching them...
- [2019-06-17 14:22:00] [Output] : ★ ...all in a row,pocketing them up after ((George Remington))
- [2019-06-17 14:23:01] [Output] : ★ George Remington would then place his both hands on the flywheel and slowly drags it out,placing it down,near
- [2019-06-17 14:23:07] [Output] : ★ ...the other clutch components ((George Remington))
- [2019-06-17 14:24:38] [Output] : ★ With the clutch assembly now removed,the only parts holding the engine into the bay would be ((George Remington))
- [2019-06-17 14:24:43] [Output] : ★ ...it's four engine mounts ((George Remington))
- [2019-06-17 14:26:16] [Output] : ★ George Remington goes to the front of the lift,keeping a safe distance from it and grabs his remote
- [2019-06-17 14:26:35] [Output] : ★ George Remington would then use the bottom button of the lift,lowering down the lift all the way
- [2019-06-17 14:26:40] [Output] : * George Remington presses the button on the ramp controls lowering the car lift. *
- [2019-06-17 14:28:04] [Output] : ★ George Remington would then make his way to the towtruck in order to get it to the car's engine
- [2019-06-17 14:28:09] [Output] : * George Remington presses on the key to unlock the vehicle. ((2013 RAM 5500 Tow Truck)) *
- [2019-06-17 14:28:59] [Output] : ★ George Remington grabs the hook's remote from the dashboard and slowly lowers the hook down by pushing...
- [2019-06-17 14:29:03] [Output] : ★ ...the bottom button ((George Remington))
- [2019-06-17 14:29:27] [Output] : ★ George Remington would stop lowering the hook when it hits the engine and then steps out of the truck
- [2019-06-17 14:31:05] [Output] : ★ George Remington takes up two straps from the truck's bed and makes his way to the engine
- [2019-06-17 14:31:28] [Output] : ★ George Remington places the impact gun on top of the engine and then throws the straps around it.
- [2019-06-17 14:31:41] [Output] : ★ George Remington then goes under the car in order to tighten down the pair of straps
- [2019-06-17 14:32:25] [Output] : ★ George Remington uses the straps's two clickets and ties them both down until they tighten the engine.
- [2019-06-17 14:35:27] [Output] : ★ George Remington then goes back up in order to attach the straps to the hook.
- [2019-06-17 14:36:12] [Output] : ★ George Remington attaches both straps to the hook in order to sustain the engine block's weight to it
- [2019-06-17 14:38:27] [Output] : ★ George Remington then goes back into the truck
- [2019-06-17 14:40:32] [Output] : ★ George Remington grabs the hook's remote and uses it to raise down the hook enough to tension the two...
- [2019-06-17 14:40:34] [Output] : ★ ...straps ((George Remington))
- [2019-06-17 14:40:44] [Output] : ★ George Remington would then step out of the truck and return to the engine bay
- [2019-06-17 14:40:46] [Output] : Vehicle spawn position set.
- [2019-06-17 14:41:06] [Output] : ★ George Remington grabs up his impact gun and leans over to the left side of the engine in order to dettach ..
- [2019-06-17 14:41:10] [Output] : ★ ...it's mounts ((George Remington))
- [2019-06-17 14:41:30] [Output] : ★ You would be able to see how the engine mounts are held in by one bolt each to the chassis ((George Remington))
- [2019-06-17 14:42:58] [Output] : ★ George Remington leans over the fender and makes his way to the first mount,starting up the impact gun
- [2019-06-17 14:43:13] [Output] : ★ George Remington would slowly remove the bolt and pocket it,moving backwards to the second one
- [2019-06-17 14:43:25] [Output] : ★ George Remington starts unscrewing the second bolt,pocketing it as well
- [2019-06-17 14:43:45] [Output] : ★ George Remington would further move to the opposite side of the car in order to take out the remaining two...
- [2019-06-17 14:43:49] [Output] : ★ ...mounts ((George Remington))
- [2019-06-17 14:44:19] [Output] : ★ George Remington leans over the right fender spoting the two engine mounts
- [2019-06-17 14:44:37] [Output] : ★ George Remington reaches the first one and starts the impact gun,removing it's bolt.
- [2019-06-17 14:47:22] [Output] : ★ George Remington then pockets up the bolt and further moves to the back mount,taking it's bolt out as well
- [2019-06-17 14:47:39] [Output] : ★ George Remington pockets up the second bolt and makes his way into the towtruck
- [2019-06-17 14:48:04] [Output] : ★ As the engine would now have no parts keeping it inside,it would be free to be pulled out ((George Remington))
- [2019-06-17 14:49:18] [Output] : ★ George Remington grabs the remote from the dashboard and slowly raises up the hook using it
- [2019-06-17 14:49:55] [Output] : ★ You would now be able to see the engine raising up from the block and staying into the... ((George Remington))
- [2019-06-17 14:49:59] [Output] : ★ ...towtruck's hook ((George Remington))
- [2019-06-17 14:50:14] [Output] : ★ George Remington slowly goes frontwards,then backwards to the engine stand
- [2019-06-17 14:51:00] [Output] : ★ George Remington steps out of the truck and makes his way back to the engine stand.
- [2019-06-17 14:51:42] [Output] : ★ George Remington grabs the metal plate separating the engine and gearbox and throws it into the truck's bed
- [2019-06-17 14:54:32] [Output] : ★ George Remington would then go to the back of the engine stand and release the foot brake
- [2019-06-17 14:54:47] [Output] : ★ George Remington slowly pushes the stand to the back of the engine in order to attach it
- [2019-06-17 14:55:10] [Output] : ★ George Remington positions the stand over the transmission holes and pushes the brake down
- [2019-06-17 14:55:24] [Output] : ★ George Remington would then lean over to the floor,picking up the eight bolts of the stand.
- [2019-06-17 14:57:38] [Output] : ★ George Remington stands back up after and inserts the bolts into the eight holes,hand tightening them each
- [2019-06-17 14:57:58] [Output] : ★ George Remington then grabs the impact gun into his right hand and starts tightening down to max all the...
- [2019-06-17 14:58:11] [Output] : ★ ...eight bolts,getting the engine secure ((George Remington))
- [2019-06-17 14:58:27] [Output] : ★ George Remington would further go under the engine in order to release the straps
- [2019-06-17 14:58:50] [Output] : ★ George Remington leans under the block and uses the two clickets,untightening both straps and throws them...
- [2019-06-17 14:58:54] [Output] : ★ ...into the truck's bed ((George Remington))
- [2019-06-17 14:59:19] [Output] : ★ George Remington makes his way to the back of the stand in order to move it
- [2019-06-17 14:59:43] [Output] : ★ George Remington releases the foot brake and drags the stand back to the wall's pillar
- [2019-06-17 15:01:31] [Output] : ★ George Remington gets back into the towtruck then and drives it frontwards,parking it in a safe spot
- [2019-06-18 01:45:01] [Output] : ★ George Remington makes his way to the passenger's door in order to open it up
- [2019-06-18 01:45:22] [Output] : ★ George Remington pulls the door's handle and wide opens it letting him acces the inside
- [2019-06-18 01:45:42] [Output] : ★ There would be a side lever on the chair,meant to acess the back seats. ((George Remington))
- [2019-06-18 01:46:03] [Output] : ★ George Remington pulls the lever up and bends the passenger seat on the dash,making room for himself
- [2019-06-18 01:46:20] [Output] : ★ George Remington leans in the car over to the rear seat in order to remove it from the car
- [2019-06-18 01:46:41] [Output] : ★ George Remington gets his hand under the middle of the seat,searching for it's release handle
- [2019-06-18 01:47:01] [Output] : ★ George Remington would then pull the handle up and grab the seat in his hands,placing it on the floor mats
- [2019-06-18 01:47:20] [Output] : ★ You would now be able to see the fuel pump assembly held to the chassis by eight bolts ((George Remington))
- [2019-06-18 01:48:31] [Output] : ★ George Remington leans over to the floor and picks up the impact gun,returning into the car
- [2019-06-18 01:48:58] [Output] : ★ George Remington then reaches for the assembly and places the impact gun down
- [2019-06-18 01:49:14] [Output] : ★ There would also be two wires going into the assembly to power it ((George Remington))
- [2019-06-18 01:49:36] [Output] : ★ George Remington takes the three wires out and lets them each seat on the metal.
- [2019-06-18 01:50:29] [Output] : ★ George Remington would then grab the impact gun again and start removing the eight bolts,one by one
- [2019-06-18 01:51:20] [Output] : ★ George Remington would place the bolts and the impact gun on the metal bench and make his way back...
- [2019-06-18 01:51:24] [Output] : ★ ...to the assembly ((George Remington))
- [2019-06-18 01:51:47] [Output] : ★ George Remington puts his hands over the assembly's shield and raises it up,placing it on the metal as well
- [2019-06-18 01:52:35] [Output] : ★ When the fuel pump would be removed,small gas drops would be pooring out from the pump ((George Remington))
- [2019-06-18 03:29:53] [Output] : ★ George Remington puts his left hand on the fuel pump and then drags it down,sliding it out from the assembly.
- [2019-06-18 03:30:09] [Output] : ★ George Remington would then take the fuel pump and place it at his feet,going out to take the new one
- [2019-06-18 03:30:58] [Output] : ★ George Remington grabs the fuel pump's box and opens it up,taking out the new parts
- [2019-06-18 03:31:13] [Output] : ★ In the box would be the brushless steel pump and it's filter. ((George Remington))
- [2019-06-18 03:31:43] [Output] : ★ George Remington holds the pump in his right hand and then slides the filter into the pump's intake...
- [2019-06-18 03:31:47] [Output] : ★ ....positioning it ((George Remington))
- [2019-06-18 03:31:59] [Output] : ★ George Remington would further return into the car in order to install the new pump
- [2019-06-18 03:33:01] [Output] : ★ George Remington steps into the car and turns himself to the back of the fuel assembly.
- [2019-06-18 03:33:18] [Output] : ★ George Remington would then hold the fuel assembly in his right hand and further use his left hand to...
- [2019-06-18 03:33:27] [Output] : ★ ...slide the new pump back in place. ((George Remington))
- [2019-06-18 03:33:38] [Output] : ★ After a short click,the new pump would now be safely secured. ((George Remington))
- [2019-06-18 03:34:06] [Output] : ★ George Remington then grabs the whole assembly from it's shield and positions it back into the gas tank...
- [2019-06-18 03:34:23] [Output] : ★ ...alligning the cover's holes over the drilled one. ((George Remington))
- [2019-06-18 03:34:39] [Output] : ★ George Remington would then get the bolts,twisting them each into their holes in order to tighten them
- [2019-06-18 03:35:04] [Output] : ★ George Remington takes the impact gun up after and starts it up,tightening down the eight bolts in a star...
- [2019-06-18 03:35:07] [Output] : ★ ...pattern ((George Remington))
- [2019-06-18 03:35:44] [Output] : ★ George Remington then gets the impact gun sitting on his knees and returns to the assembly to power it up
- [2019-06-18 03:36:00] [Output] : ★ George Remington takes each wire and reconnects them as the colors show
- [2019-06-18 03:36:19] [Output] : ★ George Remington would then grab the rear seat and place it back,pushing it to enter the clamp.
- [2019-06-18 12:49:26] [Output] : ★ George Remington grabs up his impact gun and heads to the engine bay.
- [2019-06-18 12:49:44] [Output] : ★ At the back of the empty bay you would be able to see the two top bolts holding the front... ((George Remington))
- [2019-06-18 12:49:48] [Output] : ★ ...shocks into the chassis ((George Remington))
- [2019-06-18 12:50:04] [Output] : ★ George Remington bends over the engine bay and heads to the left one
- [2019-06-18 12:50:23] [Output] : ★ George Remington would start up the impact gun and slowly remove the bolt,placing it on the inside of...
- [2019-06-18 12:50:26] [Output] : ★ ...the fender. ((George Remington))
- [2019-06-18 12:50:38] [Output] : ★ George Remington then moves to the opposite one repeating the process.
- [2019-06-18 12:50:58] [Output] : ★ George Remington would then make his way to the right hub in order to dettach the bottom bolts
- [2019-06-18 12:51:22] [Output] : ★ George Remington sits down on his knees and looks over the knuckle,locating the two bottom bolts
- [2019-06-18 12:51:45] [Output] : ★ George Remington further extends the impact gun to the first bolt and starts it up
- [2019-06-18 12:51:58] [Output] : ★ George Remington would slowly remove the bolt,setting it down,then dettaching the second one.
- [2019-06-18 12:52:19] [Output] : ★ George Remington grabs up the shock in his hand after and drags it out,carefully placing it on the floor
- [2019-06-18 12:53:37] [Output] : ★ George Remington would then go to the box and grab up a new front coilover,returning to the car
- [2019-06-18 12:56:13] [Output] : ★ George Remington slides the new coilover back in place and slowly alligns it,kepping it over the bottom holes
- [2019-06-18 12:56:37] [Output] : ★ George Remington would then pick the two bottom bolts and slowly twist them in place,hand tightening them.
- [2019-06-18 12:56:51] [Output] : ★ George Remington then uses the impact gun and torques down the two bolts to the max,heading up
- [2019-06-18 12:57:13] [Output] : ★ George Remington grabs the top bolt as well and twists it into the hole,using the impact gun to tighten it
- [2019-06-18 12:58:02] [Output] : ★ George Remington would then head to the opposite hub,taking up the second front coilover in his way
- [2019-06-18 12:58:34] [Output] : ★ George Remington sits down on his knees and locates the two bottom bolts
- [2019-06-18 12:58:53] [Output] : ★ George Remington then alligns the impact gun over the first bolt and slowly dettaches it,moving to the second
- [2019-06-18 12:58:56] [Output] : ★ ...one ((George Remington))
- [2019-06-18 13:00:46] [Output] : ★ George Remington then grabs the two bolts and setts them down on the ramp,moving to the top bolt
- [2019-06-18 13:01:01] [Output] : ★ George Remington starts up the impact gun and aims the bolt,slowly dettaching it.
- [2019-06-18 13:01:22] [Output] : ★ George Remington would then move to the back,taking a rear coilover before he goes.
- [2019-06-18 13:01:41] [Output] : ★ George Remington sits down as he is placing the coilover on the floor and heads to the rear left wheel
- [2019-06-18 13:02:18] [Output] : ★ George Remington starts up the impact gun and removes the five wheel lugnuts in a row,pocketing them up
- [2019-06-18 13:02:36] [Output] : ★ George Remington would further grab the wheel in his both hands,placing it on the floor on his left side
- [2019-06-18 13:04:17] [Output] : ★ As the wheel in now dettached,the bottom bolt holding the shock to the bottom arm would... ((George Remington))
- [2019-06-18 13:04:21] [Output] : ★ ...be visible. ((George Remington))
- [2019-06-18 13:04:37] [Output] : ★ George Remington then moves to the front hub,taking the coilover in his way
- [2019-06-18 13:06:18] [Output] : ★ George Remington slides the coilover back into the place of the shock and grabs up the two bottom bolts...
- [2019-06-18 13:06:24] [Output] : ★ ...carefully twisting them in ((George Remington))
- [2019-06-18 13:06:38] [Output] : ★ George Remington would then grab the impact gun and use it to torque down the bolts all the way in
- [2019-06-18 13:06:59] [Output] : ★ George Remington stands back up after and grabs the top bolt,twisting it into it's hole
- [2019-06-18 13:07:12] [Output] : ★ George Remington then starts up the impact gun and tightens down the top bolt using it
- [2019-06-18 13:07:21] [Output] : ★ George Remington proceeds back to the back hub
- [2019-06-18 13:07:39] [Output] : ★ George Remington sits down and starts the impact gun,slowly taking the bottom bolt out and placing it on the.
- [2019-06-18 13:07:42] [Output] : ★ ...lift's ramp ((George Remington))
- [2019-06-18 13:07:56] [Output] : ★ George Remington then stands up and makes his way to the trunk,pulling it's handle up and raising the trunk
- [2019-06-18 13:08:12] [Output] : ★ George Remington takes the floor mat appart,setting it to the middle
- [2019-06-18 13:08:26] [Output] : ★ As the floor mat is removed,the two top bolts would now be exposed ((George Remington))
- [2019-06-18 13:08:49] [Output] : ★ George Remington aims the left bolt with his impact gun and starts it up,slowly removing the bolt
- [2019-06-18 13:08:59] [Output] : ★ George Remington places the bolt aside in the trunk and then makes his way down again
- [2019-06-18 13:09:14] [Output] : ★ George Remington grabs the old shock in his hands and sets it on the floor,taking up the new coilover
- [2019-06-18 13:09:37] [Output] : ★ George Remington slides the coilover in place and holds it alligned into the bottom bolt's hole
- [2019-06-18 13:15:37] [Output] : ★ George Remington then takes the bottom bolt and twists it back into the holes,using his impact gun to...
- [2019-06-18 13:15:46] [Output] : ★ ...tighten down the bolt all the way ((George Remington))
- [2019-06-18 13:15:59] [Output] : ★ George Remington would then go up into the trunk,picking the top bolt and twisting it into the hole
- [2019-06-18 13:16:14] [Output] : ★ George Remington then starts up the impact gun and tightens the bolt down all the way
- [2019-06-18 13:17:14] [Output] : ★ George Remington then goes back down again,grabbing the wheel in his both hands
- [2019-06-18 13:17:31] [Output] : ★ George Remington further slides the wheel back into the hub and positions it over it's holes
- [2019-06-18 13:18:43] [Output] : ★ George Remington unpockets the lugnuts and then sets them each into it's holes,using his impact gun...
- [2019-06-18 13:18:51] [Output] : ★ ...to tighten them all down in a star pattern ((George Remington))
- [2019-06-18 13:19:04] [Output] : ★ George Remington then moves to the last wheel,picking up the last coilover in his way
- [2019-06-18 13:22:35] [Output] : ★ George Remington sits down on his knees and aims the lugnuts in order to dettach them
- [2019-06-18 13:22:51] [Output] : ★ George Remington starts up the impact gun and removes the lugnuts in a row,pocketing them up
- [2019-06-18 13:23:25] [Output] : ★ George Remington grabs the wheel in his both hands and slides it out of the hub,placing it down on the floor
- [2019-06-18 13:23:42] [Output] : ★ George Remington then extends his arm aiming the impact gun to the bottom bolt of the shock
- [2019-06-18 13:23:56] [Output] : ★ George Remington starts up the tool and slowly removes the bolt,placing it on the ramp
- [2019-06-18 13:24:09] [Output] : ★ George Remington then stands up and further makes his way into the trunk to the second shock bolt
- [2019-06-18 13:25:15] [Output] : ★ George Remington starts up the impact gun and slowly removes the bolt,setting it asside into the trunk
- [2019-06-18 13:25:24] [Output] : ★ George Remington further removes back down in order to grab the shock out
- [2019-06-18 13:25:46] [Output] : ★ George Remington grabs the shock in his hands and slides it out from it's place,slowly putting it on the floo
- [2019-06-18 13:26:46] [Output] : ★ George Remington grabs the new coilover up and slides it in place,alligning it over the bottom hole
- [2019-06-18 13:27:10] [Output] : ★ George Remington then picks the bottom bolt and twists it in place,using the impact gun to tighten it down.
- [2019-06-18 13:27:21] [Output] : ★ George Remington then stands up,bending over the trunk
- [2019-06-18 13:27:43] [Output] : ★ George Remington grabs the top bolt from the trunk and twists it into the top hole,using the impact gun to...
- [2019-06-18 13:27:48] [Output] : ★ ...tighten it down all the way ((George Remington))
- [2019-06-18 13:28:01] [Output] : ★ George Remington then pushes the trunk down,closing it and returns back down
- [2019-06-18 13:28:37] [Output] : ★ George Remington grabs the wheel in his both hands and slides it back into the hub
- [2019-06-18 13:29:20] [Output] : ★ George Remington then unpockets the lugnuts and places them back into the holes,torquing them down
- [2019-06-18 14:14:05] [Output] : ★ George Remington places the impact gun down and then makes his way to the bunch of tools.
- [2019-06-18 14:14:34] [Output] : ★ George Remington searches in the tools and takes up an oil filter wrench,making his way to the engine
- [2019-06-18 14:14:49] [Output] : ★ George Remington places the wrench down in order to start working
- [2019-06-18 14:14:52] [Output] : * George Remington takes out his Samsung Galaxy A6+. *
- [2019-06-18 14:15:12] [Output] : * George Remington puts down his Samsung Galaxy A6+. *
- [2019-06-18 14:15:36] [Output] : ★ George Remington leans over on his back locating the oil filter on the left side of the engine block
- [2019-06-18 14:16:12] [Output] : ★ George Remington reaches for the wrench with his right hand and moves it back to the filter
- [2019-06-18 14:16:30] [Output] : ★ George Remington puts the wrench over the oil filter and starts slowly twisting it to dettach the filter
- [2019-06-18 14:17:05] [Output] : ★ After a few rotations to the left,the filter would come off with some small oil drips ((George Remington))
- [2019-06-18 14:17:22] [Output] : ★ George Remington brings the wrench with he filter in it down and sets them on the floor
- [2019-06-18 14:17:34] [Output] : ★ George Remington looks over to the filter inspecting it's condition.
- [2019-06-18 14:17:47] [Output] : [English] George Remington says: This car be reused for another 4000 miles,I love low mileage car
- [2019-06-18 14:17:53] [Output] : George Remington: (( cars* ))
- [2019-06-18 14:18:08] [Output] : ★ George Remington makes his way up on top of the engine in order to remove the rest of parts
- [2019-06-18 14:18:31] [Output] : ★ George Remington leans over to the impact gun and picks it up in his right hand,moving it to the top of...
- [2019-06-18 14:18:35] [Output] : ★ ...the engine block ((George Remington))
- [2019-06-18 14:18:54] [Output] : ★ George Remington looks over the two engine heads covers,locating the bolts holding them.
- [2019-06-18 14:20:19] [Output] : ★ There would be six bolts holding each engine head cover to the heads that George has to take ((George Remington))
- [2019-06-18 14:20:21] [Output] : ★ ...off ((George Remington))
- [2019-06-18 14:20:58] [Output] : ★ George Remington gets the impact gun to the right head cover and starts it up,further starting to dettach...
- [2019-06-18 14:21:10] [Output] : ★ ...all the six bolts,one by one ((George Remington))
- [2019-06-18 14:21:28] [Output] : ★ George Remington would pocket them all up after and then put his hands on the edges of the cover
- [2019-06-18 14:21:50] [Output] : ★ George Remington slowly lifts up the cover from the head and makes his way to the back of the pillar,placing.
- [2019-06-18 14:21:54] [Output] : ★ ...it down near it ((George Remington))
- [2019-06-18 14:22:10] [Output] : ★ George Remington then returns back to the engine,making his way to the opposite cover
- [2019-06-18 14:24:09] [Output] : ★ George Remington puts his left hand over the head,supporting himself and starts up the impact gun...
- [2019-06-18 14:24:19] [Output] : ★ ...in his right one,starting to dettach the six bolts ((George Remington))
- [2019-06-18 14:24:35] [Output] : ★ George Remington would pocket up all the six bolts shortly after dettached and grabs the edges of the head...
- [2019-06-18 14:24:37] [Output] : ★ ...cover ((George Remington))
- [2019-06-18 14:26:26] [Output] : ★ George Remington slowly lifts the cover from the head and makes his way to the first one
- [2019-06-18 14:26:57] [Output] : ★ George Remington places the cover down where the first one would be and further returns to the right head.
- [2019-06-18 14:27:23] [Output] : ★ George Remington looks over the head spotting the two camshafts powering the timing assembly.
- [2019-06-18 14:30:09] [Output] : ★ As seen,a pair of chamshafts would have three bearings holding them and the valve springs... ((George Remington))
- [2019-06-18 14:30:19] [Output] : ★ ...all toghether ((George Remington))
- [2019-06-18 14:31:02] [Output] : ★ Each bearing would as well have two bolts aplying pressure to them ((George Remington))
- [2019-06-18 14:53:08] [Output] : ★ George Remington grabs the impact gun and heads to the rear bearing
- [2019-06-18 14:53:34] [Output] : ★ George Remington puts the impact gun over the first bolt and starts it up,slowly taking it out
- [2019-06-18 14:53:54] [Output] : ★ George Remington would then move to the second bolt and take it out as well.
- [2019-06-18 14:54:15] [Output] : ★ George Remington slowly grabs the bearing after and puts it on the ground,on the right side of the stand.
- [2019-06-18 14:55:54] [Output] : ★ George Remington then moves to the second bearing,using his impact gun to slowly take out the bolts holding i
- [2019-06-18 14:55:56] [Output] : George Remington: (( it* ))
- [2019-06-18 14:56:22] [Output] : ★ George Remington would then make his way to the last bearing,repeating the process in dettaching the two...
- [2019-06-18 14:56:27] [Output] : ★ ...bolts holding it ((George Remington))
- [2019-06-18 14:56:55] [Output] : ★ George Remington then grabs both bearings and slowly lifts them up,then placing them down on the floor
- [2019-06-18 14:59:59] [Output] : ★ With the bearings now removed,the timing cover would have to be taken out in order for the.. ((George Remington))
- [2019-06-18 15:00:05] [Output] : ★ ...camshaft to be taken out ((George Remington))
- [2019-06-18 15:00:15] [Output] : ★ George Remington makes his way to the left side of the engine
- [2019-06-18 15:00:34] [Output] : ★ George Remington starts up the impact gun and starts removing all the six bolts holding the three bearings in
- [2019-06-18 15:00:36] [Output] : ★ ...a row ((George Remington))
- [2019-06-18 15:00:55] [Output] : ★ George Remington would then lift up each bearing slowly and place them all on the ground.
- [2019-06-18 15:01:12] [Output] : ★ George Remington then makes his way to the fron of the engine block in order to dettach the timing cover
- [2019-06-18 15:03:07] [Output] : ★ there would be twelve bolts holding the timing cover over the timing assembly. ((George Remington))
- [2019-06-18 15:07:17] [Output] : ★ George Remington sits down on his knees and further proceeds to dettach the bolts
- [2019-06-18 15:07:47] [Output] : ★ George Remington pushes down the cover,holding it in place and starts up removing the bolts...
- [2019-06-18 15:07:52] [Output] : ★ ...one by one,in a row ((George Remington))
- [2019-06-18 15:08:10] [Output] : ★ George Remington would take the bolts out after and place them on the ground,placing his both hands on the ..
- [2019-06-18 15:08:14] [Output] : ★ ...timing cover ((George Remington))
- [2019-06-18 15:08:31] [Output] : ★ George Remington slowly slides the cover out,further placing it on the floor
- [2019-06-18 15:08:59] [Output] : ★ With the cover now dettached,the visible parts would be the three belts,the crankshaft... ((George Remington))
- [2019-06-18 15:09:11] [Output] : ★ ...pulley,the oil pump and the two cam gears. ((George Remington))
- [2019-06-18 15:09:30] [Output] : ★ George Remington starts up the impact gun and points the camshaft pulley in order to dettach it's bolts
- [2019-06-18 15:10:52] [Output] : ★ George Remington places his left hand on it's side and starts removing the four bolts holding it
- [2019-06-18 15:11:05] [Output] : ★ George Remington would then slowly slide the pulley out,loosening the two belts attached to it.
- [2019-06-18 15:11:16] [Output] : ★ George Remington places the pulley down on the floor after and makes his way to the belts.
- [2019-06-18 15:11:32] [Output] : ★ George Remington grabs the oil pump's belt and bends it in half,placing it near near timing cover.
- [2019-06-18 15:11:48] [Output] : ★ George Remington would then make his way to each of the timing belts,taking them out and bending them in half
- [2019-06-18 15:12:01] [Output] : ★ George Remington places down the two belts and further moves to the next step
- [2019-06-18 15:14:09] [Output] : ★ George Remington stands up to the camshafts gears in order to take them out
- [2019-06-18 15:15:57] [Output] : ★ As the gears would only be easily hammered into the camshafts ,they would be easy to take... ((George Remington))
- [2019-06-18 15:16:04] [Output] : ★ ...out just by punching them from behind. ((George Remington))
- [2019-06-18 15:17:23] [Output] : ★ George Remington turns the impact gun with it's battery facing the front of the engine and starts punching...
- [2019-06-18 15:17:32] [Output] : ★ ...each of the four gears,one by one until they come out ((George Remington))
- [2019-06-18 15:17:51] [Output] : ★ As the gears are punched,you would be able to see them all four falling on the ground. ((George Remington))
- [2019-06-18 15:19:40] [Output] : ★ George Remington then makes his way to the right side of the engine in order to take the camshafts out
- [2019-06-18 15:20:01] [Output] : ★ George Remington puts his impact gun down,where the intake used to be and then returns to the camshafts
- [2019-06-18 15:20:16] [Output] : ★ George Remington takes one of them in his hands and slowly raises it up,sliding it to the back
- [2019-06-18 15:20:35] [Output] : ★ George Remington would then let it down and proceed just the same on the remaining three of them
- [2019-06-18 15:23:53] [Output] : ★ With all the four camshafts now dettached,you would be able to see that the heads support .. ((George Remington))
- [2019-06-18 15:24:05] [Output] : ★ ...into the block each with six studs,bolted in from the top ((George Remington))
- [2019-06-18 15:25:02] [Output] : ★ George Remington takes up the impact gun and makes his way to the left hand,holding it in place with his left
- [2019-06-18 15:25:04] [Output] : ★ ...hand ((George Remington))
- [2019-06-18 15:25:35] [Output] : ★ George Remington would then further start taking the studs out,one by one,letting them sit in place
- [2019-06-18 15:26:08] [Output] : ★ George Remington would then grab the head in his both hands,placing it down near the stand
- [2019-06-18 15:26:24] [Output] : ★ George Remington further makes his way to the opposite side in order to take the second hand off
- [2019-06-18 15:28:03] [Output] : George Remington: (( head* ))
- [2019-06-18 15:28:29] [Output] : ★ George Remington places his left hand on the engine head,sustaining it's weight and starts up the impact gun.
- [2019-06-18 15:28:37] [Output] : ★ ...,taking out the studs,one by one ((George Remington))
- [2019-06-18 15:28:55] [Output] : ★ George Remington would then grab the head in his both hands and slowly lifts it,placing it down
- [2019-06-18 16:34:36] [Output] : ★ With the engine heads now removed,the headgaskets would be easily pickable. ((George Remington))
- [2019-06-18 16:34:58] [Output] : ★ George Remington grabs his hands on the gaskets and picks them both out,throwing them to the corner
- [2019-06-18 16:37:00] [Output] : ★ George Remington would then grab his impact gun back and sit down in the front of the engine block
- [2019-06-18 16:37:21] [Output] : ★ Left at the front of the block would be the crankshaft pulley and the oil pump ((George Remington))
- [2019-06-18 16:37:32] [Output] : ★ George Remington looks over the oil pump searching for the bolts holding it to the engine
- [2019-06-18 16:37:51] [Output] : ★ There would be two side bolts that are holding the pump to the old block ((George Remington))
- [2019-06-18 16:38:08] [Output] : ★ George Remington pushes the pump with his left hand to sustain it's weight and starts up the impact gun
- [2019-06-18 16:38:21] [Output] : ★ George Remington would further use the impact gun to remove the two bolts,leting them sit in the holes
- [2019-06-18 16:38:38] [Output] : ★ George Remington then grabs the pump in his hand and slowly drags it out,letting it down on the cover
- [2019-06-18 16:39:07] [Output] : ★ As the pump is removed,small oil drops would be dripping from it's place. ((George Remington))
- [2019-06-18 16:39:30] [Output] : ★ George Remington then moves the impact gun to the center bolt of the crankshaft pulley,positioning it over
- [2019-06-18 16:39:52] [Output] : ★ George Remington uses his left hand to hold the pulley's side and starts up the impact gun,unscrewing the..
- [2019-06-18 16:39:54] [Output] : ★ ...center bolt ((George Remington))
- [2019-06-18 16:40:52] [Output] : ★ George Remington would then place the impact gun down and put his both hands on the pulley,slowly..
- [2019-06-18 16:41:00] [Output] : ★ ...sliding it out from the place ((George Remington))
- [2019-06-18 16:44:45] [Output] : ★ With the pulley now taken out,the crankshaft would be only held in by the piston rods... ((George Remington))
- [2019-06-18 16:47:28] [Output] : ★ ...rods ((George Remington))
- [2019-06-18 16:49:08] [Output] : ★ George Remington steps back up and makes his way to the back of the engine stand in order to twist it.
- [2019-06-18 16:49:36] [Output] : ★ George Remington grabs the handle in his both hands and slowly pulls it back unlocking it.
- [2019-06-18 16:49:58] [Output] : ★ George Remington would then twist the stand to the left,exposing the bottom of the block on a side.
- [2019-06-18 16:50:48] [Output] : ★ George Remington then lets the handle slide in place,locking itself.
- [2019-06-18 16:51:11] [Output] : ★ George Remington walks to the front of the block,picking up his impact gun and then making his way to the...
- [2019-06-18 16:51:19] [Output] : ★ ...right side of the engine where the crankshaft is now ((George Remington))
- [2019-06-18 16:51:36] [Output] : ★ George Remington sits down on his knees and watches the crankshaft.
- [2019-06-18 16:51:56] [Output] : ★ You would be able to see six rod bearings and three crankshaft bearings holding the... ((George Remington))
- [2019-06-18 16:52:03] [Output] : ★ ...crankshaft and the pistons and rods in place. ((George Remington))
- [2019-06-18 16:53:17] [Output] : ★ George Remington takes his impact gun and starts it up,starting to remove the twelve bolts holding the...
- [2019-06-18 16:53:23] [Output] : ★ ...rod bearings to the crankshaft. ((George Remington))
- [2019-06-18 16:53:44] [Output] : ★ George Remington would then place the impact gun down and start taking out all the bearings,placing them down
- [2019-06-18 16:54:06] [Output] : ★ George Remington then pushes all the pistons up,until they reach the block's head to be taken out.
- [2019-06-18 16:54:23] [Output] : ★ George Remington stands up then and walks to the engine's block head in order to take out the pistons.
- [2019-06-18 16:55:18] [Output] : ★ George Remington grabs the first piston and slides it back from the block,placing it down on the ground.
- [2019-06-18 16:55:45] [Output] : ★ George Remington would then further repeat the process for the rest of five pistons,alligning them on the...
- [2019-06-18 16:55:48] [Output] : ★ ...ground ((George Remington))
- [2019-06-18 16:56:05] [Output] : ★ George Remington walks back to the opposite side of the engine in order to dettach the crankshaft bearings
- [2019-06-18 16:56:42] [Output] : ★ George Remington sits down on his knees and picks up his impact gun in his right hand.
- [2019-06-18 16:57:02] [Output] : ★ George Remington starts up the impact gun after and aims all of the six bolts,one by one,dettaching them.
- [2019-06-18 16:57:22] [Output] : ★ George Remington would then put the impact gun back on the floor and start picking up the three bearings...
- [2019-06-18 16:57:27] [Output] : ★ ...setting them on the ground ((George Remington))
- [2019-06-18 16:59:34] [Output] : ★ With the bearings now exposed,the crankshaft could now be slided to the back and then down.. ((George Remington))
- [2019-06-18 16:59:39] [Output] : ★ ...to be dettached ((George Remington))
- [2019-06-18 17:01:00] [Output] : ★ George Remington grabs the crankshaft in his both hands and slides it from the front to the back of the...
- [2019-06-18 17:01:04] [Output] : ★ ...engine block ((George Remington))
- [2019-06-18 17:01:26] [Output] : ★ George Remington would then lower it and slide it all the way out from the block,placing it down on the floor
- [2019-06-18 17:03:16] [Output] : ★ George Remington then stands up and makes his way to the back of the stand
- [2019-06-18 17:03:39] [Output] : ★ George Remington grabs the handle in his both hands and pulls it backwards,then twisting it one time to the..
- [2019-06-18 17:03:42] [Output] : ★ ...right ((George Remington))
- [2019-06-18 17:03:56] [Output] : ★ George Remington would then let the handle free,letting it lock itself.
- [2019-06-18 17:04:53] [Output] : ★ As the engine would now be standing in a vertical position,it could be taken out from the... ((George Remington))
- [2019-06-18 17:04:55] [Output] : ★ ...stand ((George Remington))
- [2019-06-18 17:05:14] [Output] : ★ George Remington makes his way to the front left door of the towtruck in order to enter it
- [2019-06-18 17:05:26] [Output] : ★ George Remington opens up the door and enters the truck
- [2019-06-18 17:06:30] [Output] : ★ George Remington steps out of the towtruck,making his way to the bed.
- [2019-06-18 17:07:03] [Output] : ★ George Remington takes up one strap from the back of the bed and makes his way to the engine block
- [2019-06-18 17:08:17] [Output] : ★ George Remington throws the strap over the engine as he is going under it
- [2019-06-18 17:08:30] [Output] : ★ George Remington grabs the strap's clicket and ties it inside,tightening it down.
- [2019-06-18 17:18:02] [Output] : ★ George Remington takes up the towtruck's hook and drags it,attaching it to the strap.
- [2019-06-18 17:18:18] [Output] : ★ George Remington would then grab the impact gun from the floor and make his way to the back of the stand
- [2019-06-18 17:18:34] [Output] : ★ George Remington starts up the impact gun and removes the eight bolts holding the engine into the stand...
- [2019-06-18 17:18:43] [Output] : ★ ...one by one,releasing the engine from the stand. ((George Remington))
- [2019-06-18 17:19:08] [Output] : ★ George Remington then sets the impact gun down on the floor again and makes his way into the towtruck
- [2019-06-18 17:19:34] [Output] : ★ George Remington slowly moves the towtruck with the back near the wall in order to let the old block down.
- [2019-06-18 17:20:00] [Output] : ★ George Remington grabs up the hook's remote and pushes it's bottom button lowering down the hook
- [2019-06-18 17:20:22] [Output] : ★ When the old block would hit the floor,George would stop lowering the hook. ((George Remington))
- [2019-06-18 17:20:41] [Output] : ★ George Remington steps back of the towtruck again,making his way to the back of it
- [2019-06-18 17:21:02] [Output] : ★ George Remington grabs the hook and dettaches it from the strap,letting it free in the air.
- [2019-06-18 17:22:17] [Output] : ★ George Remington then makes his way back into the towtruck in order to pick up the new block
- [2019-06-18 17:23:08] [Output] : ★ George Remington slowly approaches the new engine block which is sitting on a wooden pallet.
- [2019-06-18 17:28:33] [Output] : ★ George Remington throws the strap over the new engine block and then sits down going under it
- [2019-06-18 17:28:59] [Output] : ★ George Remington grabs the strap's clicket up and pushes it a few times,tightening down the strap
- [2019-06-18 17:29:19] [Output] : ★ George Remington then grabs the hook of the towtruck and puts it under the strap,securing it.
- [2019-06-18 17:29:44] [Output] : ★ George Remington stands back up and makes his way into the towtruck in order to lift the block up
- [2019-06-18 17:30:10] [Output] : ★ George Remington grabs the remote from the dash and uses it's upper button to lift the hook up
- [2019-06-18 17:30:34] [Output] : ★ George Remington then slowly drives the towtruck to the engine stand,alligning the block on the stand
- [2019-06-18 17:31:07] [Output] : ★ George Remington steps out of the towtruck after and makes his way to the engine block
- [2019-06-18 17:31:30] [Output] : ★ George Remington gets to the back of the stand and releases it's footbrake,pushing it to the engine
- [2019-06-18 17:31:46] [Output] : ★ George Remington would then allign the stand over the gearbox's holes and lock the brake back in place
- [2019-06-18 17:32:03] [Output] : ★ George Remington bends over the floor and picks up his impact gun and the stand's bolts
- [2019-06-18 17:32:22] [Output] : ★ George Remington twists the bolts back into their holes and starts up the impact gun,using it to tighten down
- [2019-06-18 17:32:31] [Output] : ★ ...all the eight bolts in a star pattern ((George Remington))
- [2019-06-18 17:33:00] [Output] : ★ George Remington then goes under the engine block and dettaches the clicket,loosening the strap
- [2019-06-18 17:33:18] [Output] : ★ George Remington grabs the strap after and throws it into the truck's bed,going to the back of the stand
- [2019-06-18 17:33:40] [Output] : ★ George Remington uses his right foot to release the brake and then pulls the stand all the way back to the..
- [2019-06-18 17:33:44] [Output] : ★ ...wall's pillar ((George Remington))
- [2019-06-18 17:35:16] [Output] : ★ George Remington then pulls the stand's handle out and twists it to the left,twisting the engine.
- [2019-06-18 17:35:47] [Output] : ★ As the engine would now be rotated,George could acces the bottom side of it to insert... ((George Remington))
- [2019-06-18 17:35:54] [Output] : ★ ...the crankshaft back in position. ((George Remington))
- [2019-06-18 17:36:14] [Output] : ★ George Remington sits down on his knees and grabs up the crankshaft in his hands.
- [2019-06-18 17:37:25] [Output] : ★ George Remington would then slide the crankshaft with his both hands on the back hole of the block,raising...
- [2019-06-18 17:37:28] [Output] : ★ ...it inside the engine ((George Remington))
- [2019-06-18 17:37:49] [Output] : ★ George Remington then pushes the crankshaft into the front hole,alligning it over the bearing's mounts
- [2019-06-18 17:39:06] [Output] : ★ George Remington takes up one of the crankshaft bearings from the floor and puts it in the middle where...
- [2019-06-18 17:39:11] [Output] : ★ ...it's holes would be ((George Remington))
- [2019-06-18 17:39:24] [Output] : ★ George Remington would then push it all the way in,using his right hand to hand tighten the two bolts.
- [2019-06-18 17:39:51] [Output] : ★ George Remington extends his right arm to the second bearing and places it over the front holes.
- [2019-06-18 17:40:08] [Output] : ★ George Remington uses his left hand to push in the second bearing and his right one to hand tighten it's...
- [2019-06-18 17:40:10] [Output] : ★ ...two bolts ((George Remington))
- [2019-06-18 17:41:37] [Output] : ★ George Remington grabs up the third bearing and sets it into the rear space,pushing it all the way in.
- [2019-06-18 17:41:58] [Output] : ★ George Remington would then use his right hand to hand tighten the two bolts holding the bearing in.
- [2019-06-18 17:42:26] [Output] : ★ George Remington grabs his impact gun in his right hand and aims the six bolts,starting up the tool...
- [2019-06-18 17:42:37] [Output] : ★ ...to tighten down the bolts,all in a star pattern ((George Remington))
- [2019-06-18 17:43:58] [Output] : ★ George Remington lets the impact gun back down on the floor and stands up finishing his job for the moment.
- [2019-06-18 23:41:05] [Output] : ★ George Remington makes his way to the new set of piston and opens the box up
- [2019-06-18 23:41:25] [Output] : ★ George Remington would then grab the pistons and three rod bearings making his way to the engine block
- [2019-06-18 23:41:40] [Output] : ★ As seen,the pistons would allready have the rings and the rods attached ((George Remington))
- [2019-06-18 23:42:02] [Output] : ★ George Remington makes his way to the left side of the block in order to push in three of the pistons.
- [2019-06-18 23:42:29] [Output] : ★ George Remington puts the three pistons in each hole and slowly pushes them until they reach the crankshaft
- [2019-06-18 23:42:45] [Output] : ★ George Remington would then head to the bottom of the engine block in order to attach the road bearings.
- [2019-06-18 23:43:08] [Output] : ★ George Remington puts the first bearing to the middle piston and pushes it in,using his right hand to tighten
- [2019-06-18 23:43:12] [Output] : ★ ...the two bolts down. ((George Remington))
- [2019-06-18 23:43:31] [Output] : ★ George Remington would further repeat the process,attaching the other two bearings to their rods.
- [2019-06-18 23:44:31] [Output] : * George Remington's cellphone starts to ring. *
- [2019-06-18 23:44:51] [Output] : ★ George Remington then grabs up the impact gun and holds it into his right hand,starting it up and tightening.
- [2019-06-18 23:44:58] [Output] : ★ ...down the six bolts in a cross row. ((George Remington))
- [2019-06-18 23:45:09] [Output] : ★ George Remington then puts the impact gun back down and heads to the rear of the engine stand.
- [2019-06-18 23:47:58] [Output] : ★ George Remington grabs the stand's handle with his both hands and slides it backwards,turning it to the right
- [2019-06-18 23:48:03] [Output] : ★ ...two times ((George Remington))
- [2019-06-18 23:48:13] [Output] : ★ George Remington then lets the handle free in it's place until it locks itself
- [2019-06-18 23:49:34] [Output] : ★ George Remington returns back to the last three pistons,grabbing them and the bearings from the box
- [2019-06-18 23:50:03] [Output] : ★ George Remington further returns to the top of the engine block in order to place the pistons back in.
- [2019-06-18 23:50:33] [Output] : ★ George Remington grabs the pistons in his right hand,one by one and pushes them down into the last three...
- [2019-06-18 23:50:37] [Output] : ★ ...holes,one by one ((George Remington))
- [2019-06-18 23:51:17] [Output] : ★ After the three rods would hit the crankshaft,a small click would be heard as the metals...t ((George Remington))
- [2019-06-18 23:51:20] [Output] : ★ ...touch ((George Remington))
- [2019-06-18 23:51:38] [Output] : ★ George Remington goes to the bottom of the engine and sits down on his knees
- [2019-06-18 23:52:03] [Output] : ★ George Remington would then allign all the bearings to their rods,using his hand to tighten down each of the.
- [2019-06-18 23:52:06] [Output] : ★ ...six bolts. ((George Remington))
- [2019-06-18 23:52:32] [Output] : ★ George Remington extends his arm to the opposite side of the block after,grabing his impact gun.
- [2019-06-18 23:52:48] [Output] : ★ George Remington then starts up the impact gun and tightens down all the six bolts in a cross row.
- [2019-06-18 23:53:08] [Output] : ★ George Remington lets the impact gun down after and takes up the oil filter wrench which has it's filter in i
- [2019-06-18 23:53:10] [Output] : George Remington: (( it* ))
- [2019-06-18 23:53:40] [Output] : ★ George Remington alligns the filter over the block's hole and pushes the wrench in,twisting it to the right.
- [2019-06-18 23:53:49] [Output] : ★ George Remington then slides the wrench ou and puts it on the floor.
- [2019-06-18 23:54:05] [Output] : ★ George Remington stands up and makes his way to the new oil pan in order to take it up.
- [2019-06-18 23:54:26] [Output] : ★ George Remington grabs the oilpan and it's bolts in his both hands and returns to the engine to install it
- [2019-06-18 23:54:50] [Output] : ★ George Remington sits down on his knees again and aliigns the oilpan holding it with his left hand.
- [2019-06-18 23:55:10] [Output] : ★ George Remington then picks the four bolts of the pan and twists them into the four holes,one by one.
- [2019-06-18 23:55:29] [Output] : ★ George Remington grabs up his impact gun after and starts tightening down the bolts in a cross pattern.
- [2019-06-18 23:55:41] [Output] : ★ George Remington stands back up after and lets the impact gun down as he goes.
- [2019-06-18 23:55:55] [Output] : ★ George Remington makes his way to the back of the stand in order to rotate the engine vertical
- [2019-06-18 23:56:17] [Output] : ★ George Remington grabs the handle in his both hands and slides it backwards,rotating it to the left one time.
- [2019-06-18 23:56:25] [Output] : ★ George Remington then lets the handle free,locking itself.
- [2019-06-18 23:56:47] [Output] : ★ George Remington makes his way to the set in order to pick up the new head gaskets.
- [2019-06-18 23:57:08] [Output] : ★ George Remington takes up the two new gaskets from their box and further goes back to the engine.
- [2019-06-18 23:57:33] [Output] : ★ George Remington places the left gasket on it's place and then the right one,alligning them both
- [2019-06-18 23:58:22] [Output] : ★ George Remington takes up six of the studs by sliding them from the old head and heads to the right of the..
- [2019-06-18 23:58:24] [Output] : ★ ...new block ((George Remington))
- [2019-06-18 23:58:48] [Output] : ★ George Remington hand twists the studs back in place,creating support for the new head.
- [2019-06-18 23:59:02] [Output] : ADVERT: Car meet at Santa Maria! Bring your rides, chill and have fun! | #--------
- [2019-06-18 23:59:09] [Output] : ★ George Remington makes his way to the box where the new engine heads would be in order to take one up.
- [2019-06-18 23:59:38] [Output] : ★ George Remington sits down over the box and grabs the right head,going back to the engine.
- [2019-06-19 00:00:05] [Output] : ★ George Remington alligns the block over the studs and slowly slides it in place,not damaging it.
- [2019-06-19 00:02:31] [Output] : ★ As observed,the new engine heads would have both new valves and the valves springs kit... ((George Remington))
- [2019-06-19 00:02:35] [Output] : ★ ...attached from the factory ((George Remington))
- [2019-06-19 00:03:08] [Output] : ★ George Remington grabs up the old studs from the head and loosens them up,throwing them on the ground.
- [2019-06-19 00:03:18] [Output] : [English] George Remington says: We have new studs and I m using the older ones....dumb.
- [2019-06-19 00:03:36] [Output] : ★ George Remington makes his way to the new stud kit in order to pick up six of them.
- [2019-06-19 00:04:01] [Output] : ★ George Remington leans over to the box of the studs and picks up six from the set as well as the new six ...
- [2019-06-19 00:04:11] [Output] : ★ ...camshaft bearings from the engine head kit ((George Remington))
- [2019-06-19 00:04:27] [Output] : ★ George Remington then returns back to the engine in order to fix the installed head on it
- [2019-06-19 00:05:23] [Output] : ★ George Remington gets the new studs into their holes and uses his right hand to screw back each of them.
- [2019-06-19 00:05:37] [Output] : ★ George Remington then puts the bearings on top of the head and goes to the impact gun to pick it up
- [2019-06-19 00:05:55] [Output] : ★ George Remington picks the impact gun and returns to the top of the head to further tighten down the studs
- [2019-06-19 00:06:16] [Output] : ★ George Remington starts up the impact gun and tightens all the six studs down in a cross pattern
- [2019-06-19 00:06:35] [Output] : ★ George Remington would then make his way to the box where the new camshafts would be and takes up two of them
- [2019-06-19 00:06:43] [Output] : ★ ...returning to the installed head. ((George Remington))
- [2019-06-19 00:07:05] [Output] : ★ George Remington positions the two camshafts in their place by sliding them in the back hole,then on the...
- [2019-06-19 00:07:20] [Output] : ★ ...front one and alligning them where the bearings are meant to be. ((George Remington))
- [2019-06-19 00:07:57] [Output] : ★ George Remington then takes up the six bearings and puts them into their place,using his right hand to...
- [2019-06-19 00:08:06] [Output] : ★ ...twists their twelve bolts in the block ((George Remington))
- [2019-06-19 00:08:31] [Output] : ★ George Remington then takes up the impact gun again and starts it up,further torquing down the bolts in a ...
- [2019-06-19 00:08:38] [Output] : ★ ...cross pattern to even the pressure. ((George Remington))
- [2019-06-19 00:09:01] [Output] : ★ George Remington then makes his way to the camshafts box again and takes up two of the gears,returning to the
- [2019-06-19 00:09:03] [Output] : ★ ...engine ((George Remington))
- [2019-06-19 00:09:27] [Output] : ★ George Remington puts both gears on the front side of the two camshafts and uses the back of the...
- [2019-06-19 00:09:39] [Output] : ★ ...impact gun to slightly hammer them in. ((George Remington))
- [2019-06-19 00:10:01] [Output] : ★ George Remington then goes to the engine head kit and grabs up the second head in his hands.
- [2019-06-19 00:10:17] [Output] : ★ George Remington further returns to the opposite side of the engine block and alligns the new head over...
- [2019-06-19 00:10:24] [Output] : ★ ...the gasket ((George Remington))
- [2019-06-19 00:10:54] [Output] : ★ George Remington then goes to the stud kit and takes up the six studs left,also the other two camshafts
- [2019-06-19 00:11:14] [Output] : ★ George Remington returns to the engine after and places the camshafts where the intake would follow to be.
- [2019-06-19 00:11:36] [Output] : ★ George Remington then slides the new studs back into their holes and slowly moves the engine head to allign..
- [2019-06-19 00:11:41] [Output] : ★ ...them perfectly. ((George Remington))
- [2019-06-19 00:11:58] [Output] : ★ George Remington then takes up the impact gun from the other head and starts it up,torquing down the...
- [2019-06-19 00:12:08] [Output] : ★ ...new studs into the engine in a cross pattern ((George Remington))
- [2019-06-19 00:12:29] [Output] : ★ George Remington then puts the impact gun where the camshafts are now and grabs them both,positioning...
- [2019-06-19 00:12:54] [Output] : ★ ...them one by one,sliding the back side into the back hole first and then the front side.. ((George Remington))
- [2019-06-19 00:13:03] [Output] : ★ ...into the front hole ((George Remington))
- [2019-06-19 00:13:30] [Output] : ★ George Remington then makes his way back to the box and picks up the last two gears and the new six camshaft.
- [2019-06-19 00:13:32] [Output] : ★ ...bearings ((George Remington))
- [2019-06-19 00:13:55] [Output] : ★ George Remington places the bearings on top of each hole and perfectly alligns them to even them over the...
- [2019-06-19 00:13:58] [Output] : ★ ...camshafts ((George Remington))
- [2019-06-19 00:14:17] [Output] : ★ George Remington then puts the gears down and takes up the impact gun,using it to tighten down the bearings'
- [2019-06-19 00:14:24] [Output] : ★ ...bolts in a cross pattern ((George Remington))
- [2019-06-19 00:14:49] [Output] : ★ George Remington sets the impact gun back aside then and takes the two gears,sliding them on each of the...
- [2019-06-19 00:14:52] [Output] : ★ ...camshafts ((George Remington))
- [2019-06-19 00:15:15] [Output] : ★ George Remington then grabs up the impact gun and uses it's bottom side to slowly hammer in the gears
- [2019-06-19 00:16:23] [Output] : ★ George Remington then makes his way to the front side of the engine block and puts the gun down while...
- [2019-06-19 00:16:30] [Output] : ★ ...sitting down on his knees ((George Remington))
- [2019-06-19 00:17:15] [Output] : ★ George Remington grabs up the crankshaft pulley and slides it on the front of the camshaft,hand twisting it's
- [2019-06-19 00:17:19] [Output] : ★ ...bolt in ((George Remington))
- [2019-06-19 00:17:39] [Output] : ★ George Remington then takes the impact gun up and starts it,tightening down the bolt.
- [2019-06-19 00:17:55] [Output] : ★ George Remington then puts the gun back down and takes up one of the timing belts
- [2019-06-19 00:18:29] [Output] : ★ George Remington puts the belt over the right gears and then pulls it down,sliding it on the crankshaft...
- [2019-06-19 00:18:32] [Output] : ★ ...pulley ((George Remington))
- [2019-06-19 00:22:38] [Output] : ★ George Remington then takes up the second timing belt and sets it over the left gears and slowly bends it all
- [2019-06-19 00:22:49] [Output] : ★ ...the way to the pulley,squeezing it on . ((George Remington))
- [2019-06-19 00:23:06] [Output] : ★ George Remington then grabs up the third belt and puts it over the pulley,letting it hang.
- [2019-06-19 00:23:37] [Output] : ★ George Remington picks up the oil pump from the timing cover and places it back in,tensioning the belt with..
- [2019-06-19 00:23:44] [Output] : ★ ...the pump's pulley ((George Remington))
- [2019-06-19 00:24:11] [Output] : ★ George Remington then twists the bolts back in and takes up the impact gun,using it to tighten them both down
- [2019-06-19 00:25:10] [Output] : ★ George Remington grabs up the timing cover in his both hands and pushes it over the timing assembly...
- [2019-06-19 00:25:21] [Output] : ★ ...alligning it's bolts into their holes. ((George Remington))
- [2019-06-19 00:25:48] [Output] : ★ George Remington then keeps pushing the cover with his left hand and grabs up the impact gun in his other one
- [2019-06-19 00:26:00] [Output] : ★ ...using it to tigthen down the cover's bolts,all in a row ((George Remington))
- [2019-06-19 00:26:19] [Output] : ★ George Remington then makes his way to the pillar in order to take the first head cover.
- [2019-06-19 00:26:34] [Output] : ★ George Remington takes the right cover from the wall and makes his way to the engine head
- [2019-06-19 00:27:06] [Output] : ★ George Remington places the cover over the head and uses his right hand to twist down all the six bolts
- [2019-06-19 00:27:21] [Output] : ★ George Remington would then start up the impact gun and use it to tighten the bolts fully down.
- [2019-06-19 00:27:42] [Output] : ★ George Remington makes his way to the second cover after and takes it,returning to the second engine head.
- [2019-06-19 00:28:21] [Output] : ★ George Remington places the cover over the head and positions it,hand twisting the bolts
- [2019-06-19 00:28:37] [Output] : ★ George Remington then takes the impact gun and fires it up,using it to tighten down the bolts.
- [2019-06-19 00:28:57] [Output] : ★ George Remington then places the impact gun down on the floor and makes his way where the car is sitting.
- [2019-06-19 00:29:17] [Output] : ★ George Remington grabs up the five idle rollers in his hands and further returns to the engine.
- [2019-06-19 00:29:43] [Output] : ★ George Remington sits down at the front of the block and starts placing the rollers back,twisting their bolts
- [2019-06-19 00:30:04] [Output] : ★ George Remington then extends his right arm and grabs up the impact gun,starting to tighten down the five...
- [2019-06-19 00:30:07] [Output] : ★ ...bolts using it ((George Remington))
- [2019-06-19 00:31:23] [Output] : ★ George Remington looks over the sides of the engine block afte in order to check for the engine mounts
- [2019-06-19 00:32:03] [Output] : ★ You would be able to see that the engine has four new titan mounts,coming out of the block ((George Remington))
- [2019-06-19 00:32:40] [Output] : ★ George Remington sets the impact gun aside and stands back up
- [2019-06-19 00:39:12] [Output] : ★ George Remington bends over the truck's bed and takes up two straps,going back to the engine block
- [2019-06-19 00:39:35] [Output] : ★ George Remington throws both straps over the engine,right next to each other,making the touch the ground
- [2019-06-19 00:39:59] [Output] : ★ George Remington then sits down under the stand and grabs the straps one by one,tightening them down using...
- [2019-06-19 00:40:02] [Output] : ★ ...their clickets. ((George Remington))
- [2019-06-19 00:40:20] [Output] : ★ George Remington then goes to the towtruck and steps inside in order to back it up
- [2019-06-19 00:40:44] [Output] : ★ George Remington starts up the engine and slowly drives backwards to get the hook over the engine
- [2019-06-19 00:40:58] [Output] : ★ George Remington then steps out and goes back to the engine
- [2019-06-19 00:41:39] [Output] : ★ George Remington grabs the hook up and puts it under the two straps.
- [2019-06-19 00:41:51] [Output] : ★ George Remington would move to the back of the stand,picking the impact gun in his way
- [2019-06-19 00:42:18] [Output] : ★ George Remington starts up the impact gun and takes out the eight bolts holding the engine into the stand..
- [2019-06-19 00:42:25] [Output] : ★ ...letting them fall on the ground ((George Remington))
- [2019-06-19 00:42:34] [Output] : ★ George Remington then makes his way back into the towtruck
- [2019-06-19 00:43:02] [Output] : ★ George Remington slowly drives the towtruck backwards into the car's engine bay with the hook fully raised
- [2019-06-19 00:44:11] [Output] : ★ George Remington grabs up the hook's remote after and uses it's bottom button to lower down the hook,making..
- [2019-06-19 00:44:17] [Output] : ★ ...the engine touch the chassis mounts ((George Remington))
- [2019-06-19 00:44:42] [Output] : ★ George Remington then steps out and goes to the engine bay with the impact gun
- [2019-06-19 00:45:04] [Output] : ★ George Remington bends over the last fender locating the two mounts that are now alligned.
- [2019-06-19 00:45:20] [Output] : ★ George Remington unpockets the mounts bolts and twists them back into their holes
- [2019-06-19 00:45:35] [Output] : ★ George Remington would then fire up the impact gun and use it to tighten down the two bolts all the way
- [2019-06-19 00:45:46] [Output] : ★ George Remington then makes his way to the opposite fender.
- [2019-06-19 00:46:16] [Output] : ★ George Remington unpockets the third and fourth bolt and twists them into the holes,taking up the impact gun
- [2019-06-19 00:47:29] [Output] : ★ George Remington bends over the fender and uses the impact gun to tighten down the two bolts,attaching the...
- [2019-06-19 00:47:33] [Output] : ★ ...new engine to the car. ((George Remington))
- [2019-06-19 00:47:41] [Output] : [English] George Remington shouts: It's new heart is here!
- [2019-06-19 00:47:45] [Output] : [English] George Remington shouts: Muahahahhahahhahaa!
- [2019-06-19 00:48:03] [Output] : ★ George Remington goes under the car and locates the straps clickets,loosening them up
- [2019-06-19 00:48:21] [Output] : ★ George Remington then grabs both straps out of the engine bay and throws them back into the truck's bed
- [2019-06-19 00:48:32] [Output] : ★ George Remington stands back up after and goes into the truck to move it
- [2019-06-19 00:48:52] [Output] : ★ George Remington steps in the towtruck and grabs the remote,using it to raise the hook
- [2019-06-19 00:49:15] [Output] : ★ George Remington then slowly moves the towtruck to a safe spot,letting the engine free to work on.
- [2019-06-19 00:51:16] [Output] : ★ George Remington goes to the box where the new intake manifold is and opens it up
- [2019-06-19 00:52:59] [Output] : ★ George Remington grabs the intake from it's box with his both hands and heads to the engine
- [2019-06-19 00:53:23] [Output] : ★ George Remington puts the intake on top of the new engine block and alligns it over it's holes.
- [2019-06-19 00:53:52] [Output] : ★ George Remington then takes up the intake's bolts from the ground and twists them back in the holes...
- [2019-06-19 00:54:03] [Output] : ★ ...starting up the impact gun to tighten them all down. ((George Remington))
- [2019-06-19 00:54:31] [Output] : ★ George Remington then goes to the throthle bodies box and opens it up
- [2019-06-19 00:54:50] [Output] : ★ George Remington takes up the two new throttles and further returns to the intake manifold
- [2019-06-19 00:55:16] [Output] : ★ George Remington places one of the throttles down on the radiator support and alligns the other on the right.
- [2019-06-19 00:55:21] [Output] : ★ ...hole of the intake. ((George Remington))
- [2019-06-19 00:55:50] [Output] : ★ George Remington then starts up the impact gun and unpockets the two bolts,torquing them in the throttle's...
- [2019-06-19 00:55:52] [Output] : ★ ...holes ((George Remington))
- [2019-06-19 00:56:06] [Output] : ★ George Remington then grabs the second throttle and makes his way to he opposite fender
- [2019-06-19 00:56:49] [Output] : ★ George Remington puts the throttle back over the left hole and and screws the bolts back in,tightening down..
- [2019-06-19 00:56:59] [Output] : ★ ...the bolts with his impact gun. ((George Remington))
- [2019-06-19 00:57:46] [Output] : ★ George Remington grabs up the water pump from the ground after and bends over the front of the frame
- [2019-06-19 00:58:14] [Output] : ★ George Remington puts the water pump back into it's place,using the impact gun to tighten down it's two...
- [2019-06-19 00:58:17] [Output] : ★ ...side bolts ((George Remington))
- [2019-06-19 00:58:42] [Output] : ★ George Remington then takes the power steering pump from the ground and places it on the right side of the..
- [2019-06-19 00:58:51] [Output] : ★ ...engine,twisting it's bolts back in ((George Remington))
- [2019-06-19 00:59:22] [Output] : ★ George Remington then starts up the impact gun and uses it to tighten down the two bolts all the way in
- [2019-06-19 00:59:40] [Output] : ★ George Remington takes up the AC compressor after and bend over the engine again,attaching it in it's place
- [2019-06-19 00:59:56] [Output] : ★ George Remington would then start up the impact gun and tighten down it's bolts using it.
- [2019-06-19 01:01:56] [Output] : ★ George Remington finally takes the alternator from the ground and bends over the engine,placing it into it's
- [2019-06-19 01:01:58] [Output] : ★ ...place ((George Remington))
- [2019-06-19 01:02:48] [Output] : ★ George Remington then hand twists the bolts back into the block and starts up the impact gun,tightening...
- [2019-06-19 01:02:55] [Output] : ★ ...the bolts down. ((George Remington))
- [2019-06-19 01:03:28] [Output] : ★ George Remington then grabs up the ac compressor's lines and reconnects them into the compressor
- [2019-06-19 01:03:50] [Output] : ★ George Remington further picks up the wrench from the support and tightens down the two washers,holding the..
- [2019-06-19 01:03:53] [Output] : ★ ...lines in ((George Remington))
- [2019-06-19 01:04:12] [Output] : ★ George Remington then heads to the power steering pump and gets it's line attached as well
- [2019-06-19 01:04:32] [Output] : ★ George Remington then grabs the washer into the wrench and twists it to the right,tightening it down.
- [2019-06-19 01:11:15] [Output] : ★ George Remington takes up one of the belts and places it over the power steering's roller letting it hang.
- [2019-06-19 01:12:13] [Output] : ★ George Remington then takes up the second,bigger belt and places it over the alternator and compressor,lettin
- [2019-06-19 01:12:59] [Output] : ★ ...letting it hang as well ((George Remington))
- [2019-06-19 01:13:18] [Output] : ★ George Remington bends over the ground then and takes up the water's pump pulley,inserting it in the engine b
- [2019-06-19 01:13:21] [Output] : ★ ...bay ((George Remington))
- [2019-06-19 01:14:20] [Output] : ★ George Remington then takes both belts and places them over the pulley,alligning the pulley back over the...
- [2019-06-19 01:14:22] [Output] : ★ ...pump ((George Remington))
- [2019-06-19 01:15:16] [Output] : ★ George Remington uses his right hand after and twists the four bolts back into the pump.
- [2019-06-19 01:15:43] [Output] : ★ George Remington then inserts the impact gun in the front of the engine and starts it up,tightening down the.
- [2019-06-19 01:15:51] [Output] : ★ ...four bolts in a cross pattern. ((George Remington))
- [2019-06-19 01:16:51] [Output] : ★ George Remington then places the impact gun on the radiator support and heads to the new injector kit
- [2019-06-19 01:17:46] [Output] : ★ George Remington opens up the box and picks three injectors up,returning to the engine
- [2019-06-19 01:18:40] [Output] : ★ George Remington places the injectors into three of the holes and then counts the left ones.
- [2019-06-19 01:18:45] [Output] : [English] George Remington says: Four five...oooh fuck...
- [2019-06-19 01:21:16] [Output] : [English] George Remington says: This comes with eighteen slots,guess I will use the standard mounting scheeme
- [2019-06-19 01:22:08] [Output] : ★ George Remington twists the injectors to the right then and pushes them inside the slots
- [2019-06-19 01:22:51] [Output] : ★ As the three injectors are twisted in,three clicks would be heard,prooving that they are.. ((George Remington))
- [2019-06-19 01:22:53] [Output] : ★ ...secured ((George Remington))
- [2019-06-19 01:23:19] [Output] : ★ George Remington grabs up the right fuel line from the back of the bay and then places it over the injectors
- [2019-06-19 01:23:22] [Output] : ★ ...pushing it down ((George Remington))
- [2019-06-19 01:23:44] [Output] : ★ George Remington then extends his right hand to the impact gun and takes it up,returning to the rail's bols
- [2019-06-19 01:23:49] [Output] : George Remington: (( bolts* ))
- [2019-06-19 01:24:12] [Output] : ★ George Remington starts up the impact gun and tightens down both,front and rear bolts back into the rail
- [2019-06-19 01:24:38] [Output] : ★ George Remington then lets the impact gun back down and goes back to the injectors box
- [2019-06-19 01:24:58] [Output] : ★ George Remington takes the rest of three injectors up and then returns to the car
- [2019-06-19 01:25:23] [Output] : ★ George Remington bends over the left fender and places the three injectors over their holes
- [2019-06-19 01:25:39] [Output] : ★ George Remington would then twists all the injectors to the right,pushing them in
- [2019-06-19 01:26:01] [Output] : ★ Same,three clicks would be heard marking that the injectors are placed ((George Remington))
- [2019-06-19 01:26:25] [Output] : ★ George Remington takes the fuel rail up from the back of the bay then and puts it over the three injectors...
- [2019-06-19 01:26:31] [Output] : ★ ...pushing it on them ((George Remington))
- [2019-06-19 01:28:15] [Output] : ★ George Remington then grabs the impact gun back in his right hand and uses it to tighten down the two front.
- [2019-06-19 01:28:19] [Output] : ★ ...and rear bolts ((George Remington))
- [2019-06-19 01:28:31] [Output] : ★ George Remington then sets the impact gun back aside and goes to the front of the engine
- [2019-06-19 01:29:47] [Output] : ★ George Remington takes up the spark plug wrench and six of the spark plugs going to the right side of the...
- [2019-06-19 01:29:49] [Output] : ★ ...engine ((George Remington))
- [2019-06-19 01:32:11] [Output] : ★ George Remington inserts the spark plugs back into their holes and further grabs the wrench in his right hand
- [2019-06-19 01:32:37] [Output] : ★ George Remington would then tighten down the three plugs by twisting the wrench to the right
- [2019-06-19 01:33:17] [Output] : ★ George Remington then places the wrench aside and grabs up three of the ignition coils,placing them on the...
- [2019-06-19 01:33:19] [Output] : ★ ...plugs ((George Remington))
- [2019-06-19 01:33:39] [Output] : ★ George Remington then twists the coils over the spark plugs and grab the wires,connecting the back to the...
- [2019-06-19 01:33:44] [Output] : ★ ...coils and powering them ((George Remington))
- [2019-06-19 01:34:04] [Output] : ★ George Remington then grabs the other three spark plugs and the wrench and head to the opposite side
- [2019-06-19 01:35:20] [Output] : ★ George Remington inserts the spark plugs into their holes and further uses the wrench to tighten them down.
- [2019-06-19 01:35:47] [Output] : ★ George Remington then puts the wrench back into the bunch of tools and grabs the last three coils
- [2019-06-19 01:36:35] [Output] : ★ George Remington puts the coils over each of the plugs and twists them back in
- [2019-06-19 01:36:52] [Output] : ★ George Remington then takes the three wires and connects them into the coils,powering them
- [2019-06-19 01:37:05] [Output] : ★ George Remington then heads to the front of the car,taking up the radiator in his way
- [2019-06-19 01:37:27] [Output] : ★ George Remington slides the radiator back in the it's place and alligns it over the holes.
- [2019-06-19 01:37:43] [Output] : ★ George Remington then grabs the top bolts from the radiator support and twists them back into their holes
- [2019-06-19 01:38:40] [Output] : ★ George Remington then grabs his impact gun and tightens down the two bolts,taking up the last two.
- [2019-06-19 01:38:52] [Output] : ★ George Remington goes under the car and locates the holes,twisting the bolts back in them
- [2019-06-19 01:39:14] [Output] : ★ George Remington then uses the impact gun and tightens down the bolts in their holes
- [2019-06-19 01:40:07] [Output] : ★ George Remington then grabs the bottom hose from a side and reconnects it to the intale
- [2019-06-19 01:40:12] [Output] : George Remington: (( intake* ))
- [2019-06-19 01:40:32] [Output] : ★ George Remington then uses his right hand and pushes the clamp to the intake,securing the hose
- [2019-06-19 01:40:40] [Output] : ★ George Remington stands back up after and picks the top hose
- [2019-06-19 01:41:22] [Output] : ★ George Remington attaches the hose into the radiator and grabs the clamp,making it's way over the intake
- [2019-06-19 01:43:07] [Output] : ★ George Remington then looks over the engine bay and reconnects all the wires,returning to the next step
- [2019-06-19 01:43:37] [Output] : ★ George Remington makes his way to the turbo kit and opens up it's box
- [2019-06-19 01:44:09] [Output] : ★ George Remington takes two of the Y-pipes and returns to the engine
- [2019-06-19 01:44:57] [Output] : ★ George Remington puts down the first pipe and grabs the second,making it's way to the right throttle
- [2019-06-19 01:45:27] [Output] : ★ George Remington twistst the pipe into the throttle and then grabs the pliers from the support
- [2019-06-19 01:46:02] [Output] : ★ George Remington takes the pipe's clamp and grabs it all the way over to the throttle,locking them togheter
- [2019-06-19 01:46:43] [Output] : ★ George Remington then takes up the second pipe from the support and attaches it to the right throttle.
- [2019-06-19 01:47:34] [Output] : ★ George Remington then grabs the pliers and takes the pipe's clamp,getting it over the clutch
- [2019-06-19 01:47:49] [Output] : ★ George Remington then puts the pliers down and shakes the pipe,making sure the two parts are held in togethe
- [2019-06-19 01:47:56] [Output] : George Remington: (( together* ))
- [2019-06-19 01:48:41] [Output] : ★ George Remington returns to the kit in order to pick up the two wastegates
- [2019-06-19 01:49:00] [Output] : ★ George Remington picks up the two wastegates and returns to the engine
- [2019-06-19 01:49:38] [Output] : ★ George Remington places one of the parts down on the support and heads the other one to the right...
- [2019-06-19 01:49:50] [Output] : ★ ...Y pipe ((George Remington))
- [2019-06-19 01:50:39] [Output] : ★ George Remington then twists the wastegate into the first corner of the pipe and screws it in
- [2019-06-19 01:51:11] [Output] : ★ George Remington then takes the second wastegate and attaches it to the right pipe,screwing it in
- [2019-06-19 01:51:27] [Output] : ★ George Remington then makes his way to the kit in order to get the blow off valves.
- [2019-06-19 01:51:46] [Output] : ★ George Remington takes both blow off's and returns to the car
- [2019-06-19 01:52:34] [Output] : ★ George Remington gets the first valve to the left pipe and twists it in,screwing it
- [2019-06-19 01:52:50] [Output] : ★ George Remington then makes the second's valve way to the right pipe and connects it just the same way.
- [2019-06-19 01:54:00] [Output] : ★ George Remington returns to the kit in order to take up the turbines
- [2019-06-19 01:54:14] [Output] : ★ George Remington takes the two turbines and returns to the car
- [2019-06-19 01:54:35] [Output] : ★ George Remington places down one of the turbines and heads to the left blow off with the other
- [2019-06-19 01:55:02] [Output] : ★ The blow off valve would have a pipe coming out,meant for the turbo to be attached. ((George Remington))
- [2019-06-19 01:55:46] [Output] : ★ George Remington places the turbine into the pipe and twists it in,connecting it
- [2019-06-19 01:56:04] [Output] : ★ George Remington then returns up and takes the second turbine,making his way to the right pipe
- [2019-06-19 01:57:21] [Output] : ★ George Remington attaches the turbine to the pipe and screws it in
- [2019-06-19 01:57:32] [Output] : ★ George Remington then returns to the kit in order to take the last pipes
- [2019-06-19 01:58:02] [Output] : ★ George Remington takes up both pipes and further returns to the engine
- [2019-06-19 01:59:03] [Output] : ★ George Remington takes the first pipe and attaches it to the turbine,twisting it in.
- [2019-06-19 01:59:29] [Output] : ★ George Remington then moves to the right turbine,attaching the second pipe.
- [2019-06-19 02:00:05] [Output] : ★ George Remington takes up the pliers from the support and uses it to grab both clamps from the pipes to the.
- [2019-06-19 02:00:07] [Output] : ★ ...turbines ((George Remington))
- [2019-06-19 02:01:02] [Output] : ★ George Remington heads up to the intercooler box and opens it up
- [2019-06-19 02:01:32] [Output] : ★ George Remington grabs the intercooler from the box in his both hands and further returns to the engine
- [2019-06-19 02:01:52] [Output] : ★ George Remington gets under the front of the car and positions up the intercooler.
- [2019-06-19 02:02:12] [Output] : ★ George Remington alligns the intercooler and then connects both pipes into it.
- [2019-06-19 02:02:49] [Output] : ★ George Remington steps up and takes distance from the car lift
- [2019-06-19 02:03:18] [Output] : ★ George Remington then grabs the lift's remote from his belt and pushes it's top bolt to raise the elevator...
- [2019-06-19 02:03:22] [Output] : ★ ...all the way ((George Remington))
- [2019-06-19 02:04:12] [Output] : ★ George Remington takes up the new flywheel from it's box and makes his way under the car.
- [2019-06-19 02:05:36] [Output] : ★ George Remington pushes the new flywheel into the crankshaft and holds it in with the left hand.
- [2019-06-19 02:09:27] [Output] : ★ George Remington then grabs the clutch plate from the floor and returns back up
- [2019-06-19 02:09:55] [Output] : ★ George Remington pushes the plate back into it's place and holds it in there.
- [2019-06-19 02:10:22] [Output] : ★ George Remington then unpockets the bearing wrench and pushes it into the center hole of the plate
- [2019-06-19 02:10:50] [Output] : ★ George Remington then uses the handle and twists it to the left,letting the bearing sit into it's place.
- [2019-06-19 02:11:23] [Output] : ★ George Remington removes the wrench after and throws it into the tools pile
- [2019-06-19 02:12:14] [Output] : ★ George Remington then grabs the eight bolts of the flywheel by unpocketing them and twists them into their...
- [2019-06-19 02:12:18] [Output] : ★ ...holes ((George Remington))
- [2019-06-19 02:12:43] [Output] : ★ George Remington then grabs the impact gun from the floor and starts it up,tightening down the bolts in a...
- [2019-06-19 02:12:47] [Output] : ★ ...star pattern ((George Remington))
- [2019-06-19 02:14:08] [Output] : ★ George Remington leans over the ground and takes up the pressure plate,positioning it over the clutch plate.
- [2019-06-19 02:14:29] [Output] : ★ George Remington pushes down the plate with his left hand and unpockets it's bolts
- [2019-06-19 02:14:54] [Output] : ★ George Remington then twists the bolts back in and starts up the impact gun,tightening down the bolts in a...
- [2019-06-19 02:14:59] [Output] : ★ ...star pattern. ((George Remington))
- [2019-06-19 02:15:12] [Output] : ★ George Remington then lets the impact gun down again and makes his way to the jack
- [2019-06-19 02:16:36] [Output] : ★ George Remington lowers down the jack all the way and pushes it over to the new transmision placed on a...
- [2019-06-19 02:16:42] [Output] : ★ ...pallet ((George Remington))
- [2019-06-19 02:17:01] [Output] : ★ George Remington slides the jack under the pallet and lifts it up a bit,pushing it under the car
- [2019-06-19 02:17:46] [Output] : ★ George Remington then starts pumping the jack's lever up,raising the new transmission
- [2019-06-19 02:18:23] [Output] : ★ George Remington then pushes the transmission a bit to the front and alligns it over the block's holes
- [2019-06-19 02:19:29] [Output] : ★ George Remington then grabs the eight bolts of the transmission and twists them back in place
- [2019-06-19 02:19:49] [Output] : ★ George Remington then starts up the impact gun and tightends down the bolts in a star pattern
- [2019-06-19 02:20:45] [Output] : ★ George Remington grabs the other two bolts and twists them into the rear support arm
- [2019-06-19 02:21:33] [Output] : ★ George Remington starts up the impact gun and uses it to tighten down the two bolts
- [2019-06-19 02:22:40] [Output] : ★ George Remington grabs up the wires and reconnects them to the starter placed on the new gearbox
- [2019-06-19 02:23:11] [Output] : ★ George Remington then grabs the back lights sensor and puts it back inside the gearbox,twisting it to...
- [2019-06-19 02:23:13] [Output] : ★ ...the right ((George Remington))
- [2019-06-19 02:23:44] [Output] : ★ George Remington then grabs the clutch wire and reattaches it to it's place,twisting the washer with his hand
- [2019-06-19 02:24:46] [Output] : ★ George Remington takes up the wrench and grabs the washer,slowly twisting it to the right tighten it down
- [2019-06-19 02:25:02] [Output] : ★ George Remington then puts the wrench down and takes up the dustshield and the impact gun
- [2019-06-19 02:25:17] [Output] : ★ George Remington puts the shield back over the cable and tightends down it's two bolts
- [2019-06-19 02:28:07] [Output] : ★ George Remington takes up the new driveshaft from the ground and heads back under the car with it.
- [2019-06-19 02:28:34] [Output] : ★ George Remington pushes the middle of the shaft up and alligns it's bearing over the holes
- [2019-06-19 02:28:47] [Output] : ★ George Remington starts up the impact gun and tightens down the two bolts
- [2019-06-19 02:29:37] [Output] : ★ George Remington then pushes the rear side of the shaft up to the differential and twists it's bolts back in
- [2019-06-19 02:29:53] [Output] : ★ George Remington then uses the impact gun and tightens down all the four bolts in a cross pattern
- [2019-06-19 02:30:12] [Output] : ★ George Remington further makes his way to the front and pushes it up,alligning it over the gearbox
- [2019-06-19 02:30:47] [Output] : ★ George Remington hand twists the four bolts and then uses the impact gun to tighten them all down
- [2019-06-19 02:30:56] [Output] : [English] George Remington says: Done under it,shis...
- [2019-06-19 02:31:15] [Output] : ★ George Remington grabs the lift's remote and lowers it down to the floor level.
- [2019-06-19 02:31:19] [Output] : * George Remington presses the button on the ramp controls raising the car lift. *
- [2019-06-19 02:31:19] [Output] : * George Remington presses the button on the ramp controls raising the car lift. *
- [2019-06-19 02:31:20] [Output] : * George Remington presses the button on the ramp controls lowering the car lift. *
- [2019-06-19 02:31:44] [Output] : ★ George Remington grabs one of the new axles and pushes it into the gearbox
- [2019-06-19 02:32:18] [Output] : ★ George Remington then slowly pulls the axle,inserting the axle into the knuckle.
- [2019-06-19 02:32:39] [Output] : ★ George Remington unpockets a safety pin and inserts it into the axle's hole,bending it around
- [2019-06-19 02:32:55] [Output] : ★ George Remington then grabs up the wheel in his both hands and slides it back into the hub
- [2019-06-19 02:33:18] [Output] : ★ George Remington then unpockets the five lugnuts and tightens them in a star pattern with the impact gun
- [2019-06-19 02:33:36] [Output] : ★ George Remington grabs up the second axle and the impact gun and heads to the other wheel
- [2019-06-19 02:34:05] [Output] : ★ George Remington sits down on his knees and pushes the axle into the gearbox.
- [2019-06-19 02:34:30] [Output] : ★ George Remington would then slowly pull the axle to the knuckle and inserts it into the hole.
- [2019-06-19 02:34:45] [Output] : ★ George Remington then unpockets a small safety pin and places it in,bending it around the axle.
- [2019-06-19 02:34:57] [Output] : ★ George Remington grabs up the wheel in his both hands and then slides it into the hub
- [2019-06-19 02:35:16] [Output] : ★ George Remington then unpockets the five lugnuts and puts them in,tightening them with the impact gun
- [2019-06-19 02:35:31] [Output] : ★ George Remington stands back up after and enters the driver's seat
- [2019-06-19 02:36:10] [Output] : ★ George Remington takes up the shifter's handle from the floor mat and places it back,hand twisting it's bolts
- [2019-06-19 02:36:23] [Output] : ★ George Remington then grabs the metal plate and drops it over the holes.
- [2019-06-19 02:36:43] [Output] : ★ George Remington starts the impact gun up and then tightens down both's parts bolts in a cross pattern
- [2019-06-19 02:37:23] [Output] : ★ George Remington steps out of the car and grabs a tranny oil bottle,steping back into the car
- [2019-06-19 02:37:56] [Output] : ★ George Remington then poors the oil into the transmission throwing the bottle down after
- [2019-06-19 02:38:15] [Output] : ★ George Remington then grabs the plastic plate and pushes it down on the clamps
- [2019-06-19 02:38:33] [Output] : ★ George Remington would finally get the shifter knob and twist it to the right,tightening it down
- [2019-06-19 02:42:53] [Output] : ★ George Remington steps out of the car and goes to take a race fuel barrel
- [2019-06-19 02:43:15] [Output] : ★ As seen,each barrell would have a hose leading from it's top ((George Remington))
- [2019-06-19 02:43:42] [Output] : ★ George Remington starts pushing the barrell from the bottom using both his hands and feet all the way to...
- [2019-06-19 02:43:47] [Output] : ★ ...the gastank ((George Remington))
- [2019-06-19 02:44:05] [Output] : ★ George Remington opens up the tank's door and then unscrews the cap
- [2019-06-19 02:44:26] [Output] : ★ George Remington takes the hose in his mouth and takes all the air out,then putting the hose into the tank
- [2019-06-19 02:44:43] [Output] : ★ After several minute,the gastank would be filled up ((George Remington))
- [2019-06-19 02:45:26] [Output] : ★ George Remington removes the hose from the tank and puts it back on top of the barrel
- [2019-06-19 02:45:39] [Output] : ★ George Remington would then twist the cap back in and close the door after
- [2019-06-19 02:46:49] [Output] : ★ George Remington then goes to the box where the cobb tuner and opens it up
- [2019-06-19 02:47:03] [Output] : ★ George Remington takes up the device and it's both cables and heads up to the laptop
- [2019-06-19 02:47:17] [Output] : ✪ George Remington sits down on the chair.
- [2019-06-19 02:47:37] [Output] : ★ George Remington puts the device on the desk and then attaches the usb cable to the port
- [2019-06-19 02:48:14] [Output] : ★ As the device is connected,the interface would be displayed on the opened laptop ((George Remington))
- [2019-06-19 02:48:31] [Output] : ★ George Remington then scrolls trough the program in order to find the corect map
- [2019-06-19 02:49:40] [Output] : ★ There would be a displayed map: RACE FUEL-TWIN TURBO MAP ((George Remington))
- [2019-06-19 02:49:42] [Output] : [English] George Remington shouts: Old Macdonald had a farm!
- [2019-06-19 02:49:47] [Output] : [English] George Remington shouts: Hiaiaioooo!
- [2019-06-19 02:50:01] [Output] : ★ George Remington selects the map and downloads it directly loading it on the device
- [2019-06-19 02:50:19] [Output] : ★ George Remington then unplugs the usb cable and connects the obd one,taking the device up
- [2019-06-19 02:50:20] [Output] : ✪ George Remington stands up from the chair.
- [2019-06-19 02:50:46] [Output] : ★ George Remington steps inside the car and searches down for the obd port
- [2019-06-19 02:51:13] [Output] : ★ George Remington plugs the cobb into the obd and turns the key on the accesories
- [2019-06-19 02:51:36] [Output] : ★ As the key is turned,the device would start and display the remaps ((George Remington))
- [2019-06-19 02:52:07] [Output] : ★ George Remington then scrolls trough the map pushing the bottom button finding the right one
- [2019-06-19 02:52:54] [Output] : ★ George Remington then pushes the middle button after finding the corect map and starts loading the map on the
- [2019-06-19 02:52:57] [Output] : ★ ...car's ecu ((George Remington))
- [2019-06-19 02:53:24] [Output] : ★ The device would then show to turn the key all the way of ((George Remington))
- [2019-06-19 02:53:39] [Output] : ★ George Remington turns the key in the ignition and lets it sit there.
- [2019-06-19 02:53:49] [Output] : ★ The map installation would now be finished ((George Remington))
- [2019-06-19 02:53:58] [Output] : [English] George Remington shouts: Done!
- [2019-06-19 02:54:23] [Output] : ★ George Remington twists the key in the ignition and starts up the car
- [2019-06-19 02:54:31] [Output] : [English] George Remington shouts: Aliveeee,it's aliveeee!
Add Comment
Please, Sign In to add comment