SHARE
TWEET

TinyG V8 on 1000mmx750mm OX CNC Kit W/ GT3 & PWM Spindle

akfreak Jun 12th, 2015 1,719 Never
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
  1.  $$
  2.  {"ej":""}
  3. [fb]  firmware build            440.14
  4. [fv]  firmware version            0.97
  5. [hp]  hardware platform           1.00
  6. [hv]  hardware version            8.00
  7. [id]  TinyG ID                    3X3566-KSU
  8. [ja]  junction acceleration 1000000 mm
  9. [ct]  chordal tolerance           0.0100 mm
  10. [sl]  soft limit enable           1
  11. [st]  switch type                 1 [0=NO,1=NC]
  12. [mt]  motor idle timeout         10.00 Sec
  13. [ej]  enable json mode            0 [0=text,1=JSON]
  14. [jv]  json verbosity              1 [0=silent,1=footer,2=messages,3=configs,4=linenum,5=verbose]
  15. [js]  json serialize style        1 [0=relaxed,1=strict]
  16. [tv]  text verbosity              1 [0=silent,1=verbose]
  17. [qv]  queue report verbosity      1 [0=off,1=single,2=triple]
  18. [sv]  status report verbosity     2 [0=off,1=filtered,2=verbose]
  19. [si]  status interval           250 ms
  20. [ec]  expand LF to CRLF on TX     0 [0=off,1=on]
  21. [ee]  enable echo                 0 [0=off,1=on]
  22. [ex]  enable flow control         2 [0=off,1=XON/XOFF, 2=RTS/CTS]
  23. [baud] USB baud rate              5 [1=9600,2=19200,3=38400,4=57600,5=115200,6=230400]
  24. [net] network mode                0 [0=master]
  25. [gpl] default gcode plane         0 [0=G17,1=G18,2=G19]
  26. [gun] default gcode units mode    1 [0=G20,1=G21]
  27. [gco] default gcode coord system  1 [1-6 (G54-G59)]
  28. [gpa] default gcode path control  2 [0=G61,1=G61.1,2=G64]
  29. [gdi] default gcode distance mode 0 [0=G90,1=G91]
  30. [1ma] m1 map to axis              0 [0=X,1=Y,2=Z...]
  31. [1sa] m1 step angle               1.800 deg
  32. [1tr] m1 travel per revolution   60.0000 mm
  33. [1mi] m1 microsteps               8 [1,2,4,8]
  34. [1po] m1 polarity                 1 [0=normal,1=reverse]
  35. [1pm] m1 power management         3 [0=disabled,1=always on,2=in cycle,3=when moving]
  36. [2ma] m2 map to axis              1 [0=X,1=Y,2=Z...]
  37. [2sa] m2 step angle               1.800 deg
  38. [2tr] m2 travel per revolution   60.0000 mm
  39. [2mi] m2 microsteps               8 [1,2,4,8]
  40. [2po] m2 polarity                 0 [0=normal,1=reverse]
  41. [2pm] m2 power management         3 [0=disabled,1=always on,2=in cycle,3=when moving]
  42. [3ma] m3 map to axis              1 [0=X,1=Y,2=Z...]
  43. [3sa] m3 step angle               1.800 deg
  44. [3tr] m3 travel per revolution   60.0000 mm
  45. [3mi] m3 microsteps               8 [1,2,4,8]
  46. [3po] m3 polarity                 1 [0=normal,1=reverse]
  47. [3pm] m3 power management         3 [0=disabled,1=always on,2=in cycle,3=when moving]
  48. [4ma] m4 map to axis              2 [0=X,1=Y,2=Z...]
  49. [4sa] m4 step angle               1.800 deg
  50. [4tr] m4 travel per revolution    8.0000 mm
  51. [4mi] m4 microsteps               4 [1,2,4,8]
  52. [4po] m4 polarity                 1 [0=normal,1=reverse]
  53. [4pm] m4 power management         3 [0=disabled,1=always on,2=in cycle,3=when moving]
  54. [xam] x axis mode                 1 [standard]
  55. [xvm] x velocity maximum      16000 mm/min
  56. [xfr] x feedrate maximum      16000 mm/min
  57. [xtn] x travel minimum            0.000 mm
  58. [xtm] x travel maximum          550.000 mm
  59. [xjm] x jerk maximum           5000 mm/min^3 * 1 million
  60. [xjh] x jerk homing           10000 mm/min^3 * 1 million
  61. [xjd] x junction deviation        0.0100 mm (larger is faster)
  62. [xsn] x switch min                1 [0=off,1=homing,2=limit,3=limit+homing]
  63. [xsx] x switch max                0 [0=off,1=homing,2=limit,3=limit+homing]
  64. [xsv] x search velocity        3000 mm/min
  65. [xlv] x latch velocity          100 mm/min
  66. [xlb] x latch backoff            20.000 mm
  67. [xzb] x zero backoff              3.000 mm
  68. [yam] y axis mode                 1 [standard]
  69. [yvm] y velocity maximum      16000 mm/min
  70. [yfr] y feedrate maximum      16000 mm/min
  71. [ytn] y travel minimum            0.000 mm
  72. [ytm] y travel maximum          760.000 mm
  73. [yjm] y jerk maximum           5000 mm/min^3 * 1 million
  74. [yjh] y jerk homing           10000 mm/min^3 * 1 million
  75. [yjd] y junction deviation        0.0100 mm (larger is faster)
  76. [ysn] y switch min                1 [0=off,1=homing,2=limit,3=limit+homing]
  77. [ysx] y switch max                0 [0=off,1=homing,2=limit,3=limit+homing]
  78. [ysv] y search velocity        3000 mm/min
  79. [ylv] y latch velocity          100 mm/min
  80. [ylb] y latch backoff            20.000 mm
  81. [yzb] y zero backoff              3.000 mm
  82. [zam] z axis mode                 1 [standard]
  83. [zvm] z velocity maximum        800 mm/min
  84. [zfr] z feedrate maximum        800 mm/min
  85. [ztn] z travel minimum            0.000 mm
  86. [ztm] z travel maximum           40.000 mm
  87. [zjm] z jerk maximum             50 mm/min^3 * 1 million
  88. [zjh] z jerk homing            1000 mm/min^3 * 1 million
  89. [zjd] z junction deviation        0.0100 mm (larger is faster)
  90. [zsn] z switch min                0 [0=off,1=homing,2=limit,3=limit+homing]
  91. [zsx] z switch max                3 [0=off,1=homing,2=limit,3=limit+homing]
  92. [zsv] z search velocity        3000 mm/min
  93. [zlv] z latch velocity          100 mm/min
  94. [zlb] z latch backoff            20.000 mm
  95. [zzb] z zero backoff              3.000 mm
  96. [aam] a axis mode                 3 [radius]
  97. [avm] a velocity maximum     230400 deg/min
  98. [afr] a feedrate maximum     230400 deg/min
  99. [atn] a travel minimum           -1.000 deg
  100. [atm] a travel maximum           -1.000 deg
  101. [ajm] a jerk maximum           5760 deg/min^3 * 1 million
  102. [ajh] a jerk homing           11520 deg/min^3 * 1 million
  103. [ajd] a junction deviation        0.0500 deg (larger is faster)
  104. [ara] a radius value              0.1990 deg
  105. [asn] a switch min                1 [0=off,1=homing,2=limit,3=limit+homing]
  106. [asx] a switch max                0 [0=off,1=homing,2=limit,3=limit+homing]
  107. [asv] a search velocity         600 deg/min
  108. [alv] a latch velocity          100 deg/min
  109. [alb] a latch backoff             5.000 deg
  110. [azb] a zero backoff              2.000 deg
  111. [bam] b axis mode                 0 [disabled]
  112. [bvm] b velocity maximum       3600 deg/min
  113. [bfr] b feedrate maximum       3600 deg/min
  114. [btn] b travel minimum           -1.000 deg
  115. [btm] b travel maximum           -1.000 deg
  116. [bjm] b jerk maximum             20 deg/min^3 * 1 million
  117. [bjd] b junction deviation        0.0500 deg (larger is faster)
  118. [bra] b radius value              1.0000 deg
  119. [cam] c axis mode                 0 [disabled]
  120. [cvm] c velocity maximum       3600 deg/min
  121. [cfr] c feedrate maximum       3600 deg/min
  122. [ctn] c travel minimum           -1.000 deg
  123. [ctm] c travel maximum           -1.000 deg
  124. [cjm] c jerk maximum             20 deg/min^3 * 1 million
  125. [cjd] c junction deviation        0.0500 deg (larger is faster)
  126. [cra] c radius value              1.0000 deg
  127. [p1frq] pwm frequency              5000 Hz
  128. [p1csl] pwm cw speed lo               0 RPM
  129. [p1csh] pwm cw speed hi           10000 RPM
  130. [p1cpl] pwm cw phase lo           0.000 [0..1]
  131. [p1cph] pwm cw phase hi           1.000 [0..1]
  132. [p1wsl] pwm ccw speed lo           1000 RPM
  133. [p1wsh] pwm ccw speed hi           2000 RPM
  134. [p1wpl] pwm ccw phase lo          0.125 [0..1]
  135. [p1wph] pwm ccw phase hi          0.200 [0..1]
  136. [p1pof] pwm phase off             0.000 [0..1]
  137. [g54x] g54 x offset               0.000 mm
  138. [g54y] g54 y offset               0.000 mm
  139. [g54z] g54 z offset               0.000 mm
  140. [g54a] g54 a offset               0.000 deg
  141. [g54b] g54 b offset               0.000 deg
  142. [g54c] g54 c offset               0.000 deg
  143. [g55x] g55 x offset              75.000 mm
  144. [g55y] g55 y offset              75.000 mm
  145. [g55z] g55 z offset               0.000 mm
  146. [g55a] g55 a offset               0.000 deg
  147. [g55b] g55 b offset               0.000 deg
  148. [g55c] g55 c offset               0.000 deg
  149. [g56x] g56 x offset               0.000 mm
  150. [g56y] g56 y offset               0.000 mm
  151. [g56z] g56 z offset               0.000 mm
  152. [g56a] g56 a offset               0.000 deg
  153. [g56b] g56 b offset               0.000 deg
  154. [g56c] g56 c offset               0.000 deg
  155. [g57x] g57 x offset               0.000 mm
  156. [g57y] g57 y offset               0.000 mm
  157. [g57z] g57 z offset               0.000 mm
  158. [g57a] g57 a offset               0.000 deg
  159. [g57b] g57 b offset               0.000 deg
  160. [g57c] g57 c offset               0.000 deg
  161. [g58x] g58 x offset               0.000 mm
  162. [g58y] g58 y offset               0.000 mm
  163. [g58z] g58 z offset               0.000 mm
  164. [g58a] g58 a offset               0.000 deg
  165. [g58b] g58 b offset               0.000 deg
  166. [g58c] g58 c offset               0.000 deg
  167. [g59x] g59 x offset               0.000 mm
  168. [g59y] g59 y offset               0.000 mm
  169. [g59z] g59 z offset               0.000 mm
  170. [g59a] g59 a offset               0.000 deg
  171. [g59b] g59 b offset               0.000 deg
  172. [g59c] g59 c offset               0.000 deg
  173. [g92x] g92 x offset               0.000 mm
  174. [g92y] g92 y offset               0.000 mm
  175. [g92z] g92 z offset               0.000 mm
  176. [g92a] g92 a offset               0.000 deg
  177. [g92b] g92 b offset               0.000 deg
  178. [g92c] g92 c offset               0.000 deg
  179. [g28x] g28 x position             0.000 mm
  180. [g28y] g28 y position             0.000 mm
  181. [g28z] g28 z position             0.000 mm
  182. [g28a] g28 a position             0.000 deg
  183. [g28b] g28 b position             0.000 deg
  184. [g28c] g28 c position             0.000 deg
  185. [g30x] g30 x position             0.000 mm
  186. [g30y] g30 y position             0.000 mm
  187. [g30z] g30 z position             0.000 mm
  188. [g30a] g30 a position             0.000 deg
  189. [g30b] g30 b position             0.000 deg
  190. [g30c] g30 c position             0.000 deg
  191. tinyg [mm] ok>
RAW Paste Data
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy. OK, I Understand
 
Top