API tools faq
paste
Advertisement
spiky001

Untitled

spiky001
Jan 26th, 2014
68
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 31.70 KB | None | 0 0
raw download clone embed print report
  1. [ 0.438189] hub 1-0:1.0: usb_probe_interface
  2. [ 0.438192] hub 1-0:1.0: usb_probe_interface - got id
  3. [ 0.438196] hub 1-0:1.0: USB hub found
  4. [ 0.439058] hub 1-0:1.0: 8 ports detected
  5. [ 0.439883] hub 1-0:1.0: standalone hub
  6. [ 0.439886] hub 1-0:1.0: no power switching (usb 1.0)
  7. [ 0.439889] hub 1-0:1.0: individual port over-current protection
  8. [ 0.439892] hub 1-0:1.0: power on to power good time: 20ms
  9. [ 0.439904] hub 1-0:1.0: local power source is good
  10. [ 0.439953] hub 1-0:1.0: trying to enable port power on non-switchable hub
  11. [ 0.440124] ehci-platform: EHCI generic platform driver
  12. [ 0.441029] uhci_hcd: USB Universal Host Controller Interface driver
  13. [ 0.442098] uhci_hcd 0000:00:10.0: UHCI Host Controller
  14. [ 0.443072] uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 2
  15. [ 0.444733] uhci_hcd 0000:00:10.0: detected 2 ports
  16. [ 0.445591] uhci_hcd 0000:00:10.0: uhci_check_and_reset_hc: cmd = 0x0000
  17. [ 0.445594] uhci_hcd 0000:00:10.0: Performing full reset
  18. [ 0.445607] uhci_hcd 0000:00:10.0: supports USB remote wakeup
  19. [ 0.445622] uhci_hcd 0000:00:10.0: irq 21, io base 0x0000d400
  20. [ 0.446519] usb usb2: default language 0x0409
  21. [ 0.446535] usb usb2: udev 1, busnum 2, minor = 128
  22. [ 0.446538] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
  23. [ 0.447341] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  24. [ 0.448852] usb usb2: Product: UHCI Host Controller
  25. [ 0.449625] usb usb2: Manufacturer: Linux 3.13.0 uhci_hcd
  26. [ 0.450399] usb usb2: SerialNumber: 0000:00:10.0
  27. [ 0.451299] usb usb2: usb_probe_device
  28. [ 0.451303] usb usb2: configuration #1 chosen from 1 choice
  29. [ 0.451318] usb usb2: adding 2-0:1.0 (config #1, interface 0)
  30. [ 0.451385] hub 2-0:1.0: usb_probe_interface
  31. [ 0.451389] hub 2-0:1.0: usb_probe_interface - got id
  32. [ 0.451392] hub 2-0:1.0: USB hub found
  33. [ 0.452150] hub 2-0:1.0: 2 ports detected
  34. [ 0.452847] hub 2-0:1.0: standalone hub
  35. [ 0.452850] hub 2-0:1.0: no power switching (usb 1.0)
  36. [ 0.452853] hub 2-0:1.0: individual port over-current protection
  37. [ 0.452856] hub 2-0:1.0: power on to power good time: 2ms
  38. [ 0.452867] hub 2-0:1.0: local power source is good
  39. [ 0.452885] hub 2-0:1.0: trying to enable port power on non-switchable hub
  40. [ 0.452940] uhci_hcd 0000:00:10.0: FS/LS companion for 0000:00:10.4
  41. [ 0.453158] uhci_hcd 0000:00:10.1: UHCI Host Controller
  42. [ 0.454040] uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 3
  43. [ 0.455497] uhci_hcd 0000:00:10.1: detected 2 ports
  44. [ 0.456242] uhci_hcd 0000:00:10.1: uhci_check_and_reset_hc: cmd = 0x0000
  45. [ 0.456245] uhci_hcd 0000:00:10.1: Performing full reset
  46. [ 0.456258] uhci_hcd 0000:00:10.1: supports USB remote wakeup
  47. [ 0.456271] uhci_hcd 0000:00:10.1: irq 21, io base 0x0000d800
  48. [ 0.457068] usb usb3: default language 0x0409
  49. [ 0.457084] usb usb3: udev 1, busnum 3, minor = 256
  50. [ 0.457088] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
  51. [ 0.457810] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  52. [ 0.459240] usb usb3: Product: UHCI Host Controller
  53. [ 0.459986] usb usb3: Manufacturer: Linux 3.13.0 uhci_hcd
  54. [ 0.460736] usb usb3: SerialNumber: 0000:00:10.1
  55. [ 0.461610] usb usb3: usb_probe_device
  56. [ 0.461615] usb usb3: configuration #1 chosen from 1 choice
  57. [ 0.461630] usb usb3: adding 3-0:1.0 (config #1, interface 0)
  58. [ 0.461696] hub 3-0:1.0: usb_probe_interface
  59. [ 0.461699] hub 3-0:1.0: usb_probe_interface - got id
  60. [ 0.461703] hub 3-0:1.0: USB hub found
  61. [ 0.462456] hub 3-0:1.0: 2 ports detected
  62. [ 0.463185] hub 3-0:1.0: standalone hub
  63. [ 0.463188] hub 3-0:1.0: no power switching (usb 1.0)
  64. [ 0.463191] hub 3-0:1.0: individual port over-current protection
  65. [ 0.463194] hub 3-0:1.0: power on to power good time: 2ms
  66. [ 0.463205] hub 3-0:1.0: local power source is good
  67. [ 0.463223] hub 3-0:1.0: trying to enable port power on non-switchable hub
  68. [ 0.463272] uhci_hcd 0000:00:10.1: FS/LS companion for 0000:00:10.4
  69. [ 0.463467] uhci_hcd 0000:00:10.2: UHCI Host Controller
  70. [ 0.464323] uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 4
  71. [ 0.465727] uhci_hcd 0000:00:10.2: detected 2 ports
  72. [ 0.466470] uhci_hcd 0000:00:10.2: uhci_check_and_reset_hc: cmd = 0x0000
  73. [ 0.466473] uhci_hcd 0000:00:10.2: Performing full reset
  74. [ 0.466486] uhci_hcd 0000:00:10.2: supports USB remote wakeup
  75. [ 0.466509] uhci_hcd 0000:00:10.2: irq 21, io base 0x0000dc00
  76. [ 0.467325] usb usb4: default language 0x0409
  77. [ 0.467340] usb usb4: udev 1, busnum 4, minor = 384
  78. [ 0.467344] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
  79. [ 0.468065] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  80. [ 0.469459] usb usb4: Product: UHCI Host Controller
  81. [ 0.470186] usb usb4: Manufacturer: Linux 3.13.0 uhci_hcd
  82. [ 0.470906] usb usb4: SerialNumber: 0000:00:10.2
  83. [ 0.471771] usb usb4: usb_probe_device
  84. [ 0.471777] usb usb4: configuration #1 chosen from 1 choice
  85. [ 0.471791] usb usb4: adding 4-0:1.0 (config #1, interface 0)
  86. [ 0.471864] hub 4-0:1.0: usb_probe_interface
  87. [ 0.471867] hub 4-0:1.0: usb_probe_interface - got id
  88. [ 0.471871] hub 4-0:1.0: USB hub found
  89. [ 0.472628] hub 4-0:1.0: 2 ports detected
  90. [ 0.473352] hub 4-0:1.0: standalone hub
  91. [ 0.473355] hub 4-0:1.0: no power switching (usb 1.0)
  92. [ 0.473358] hub 4-0:1.0: individual port over-current protection
  93. [ 0.473361] hub 4-0:1.0: power on to power good time: 2ms
  94. [ 0.473371] hub 4-0:1.0: local power source is good
  95. [ 0.473390] hub 4-0:1.0: trying to enable port power on non-switchable hub
  96. [ 0.473441] uhci_hcd 0000:00:10.2: FS/LS companion for 0000:00:10.4
  97. [ 0.473638] uhci_hcd 0000:00:10.3: UHCI Host Controller
  98. [ 0.474489] uhci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 5
  99. [ 0.475892] uhci_hcd 0000:00:10.3: detected 2 ports
  100. [ 0.476637] uhci_hcd 0000:00:10.3: uhci_check_and_reset_hc: cmd = 0x0000
  101. [ 0.476640] uhci_hcd 0000:00:10.3: Performing full reset
  102. [ 0.476653] uhci_hcd 0000:00:10.3: supports USB remote wakeup
  103. [ 0.476677] uhci_hcd 0000:00:10.3: irq 21, io base 0x0000e000
  104. [ 0.477484] usb usb5: default language 0x0409
  105. [ 0.477499] usb usb5: udev 1, busnum 5, minor = 512
  106. [ 0.477503] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
  107. [ 0.478223] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  108. [ 0.479614] usb usb5: Product: UHCI Host Controller
  109. [ 0.480341] usb usb5: Manufacturer: Linux 3.13.0 uhci_hcd
  110. [ 0.481065] usb usb5: SerialNumber: 0000:00:10.3
  111. [ 0.481920] usb usb5: usb_probe_device
  112. [ 0.481925] usb usb5: configuration #1 chosen from 1 choice
  113. [ 0.481939] usb usb5: adding 5-0:1.0 (config #1, interface 0)
  114. [ 0.482020] hub 5-0:1.0: usb_probe_interface
  115. [ 0.482024] hub 5-0:1.0: usb_probe_interface - got id
  116. [ 0.482027] hub 5-0:1.0: USB hub found
  117. [ 0.482769] hub 5-0:1.0: 2 ports detected
  118. [ 0.483496] hub 5-0:1.0: standalone hub
  119. [ 0.483499] hub 5-0:1.0: no power switching (usb 1.0)
  120. [ 0.483502] hub 5-0:1.0: individual port over-current protection
  121. [ 0.483505] hub 5-0:1.0: power on to power good time: 2ms
  122. [ 0.483516] hub 5-0:1.0: local power source is good
  123. [ 0.483533] hub 5-0:1.0: trying to enable port power on non-switchable hub
  124. [ 0.483588] uhci_hcd 0000:00:10.3: FS/LS companion for 0000:00:10.4
  125. [ 0.483751] usbcore: registered new interface driver usb-storage
  126. [ 0.484610] i8042: PNP: PS/2 Controller [PNP0f13:PS2M] at 0x60,0x64 irq 12
  127. [ 0.485322] i8042: PNP: PS/2 controller doesn't have KBD irq; using default 1
  128. [ 0.486615] serio: i8042 KBD port at 0x60,0x64 irq 1
  129. [ 0.487368] serio: i8042 AUX port at 0x60,0x64 irq 12
  130. [ 0.488423] mousedev: PS/2 mouse device common for all mice
  131. [ 0.489512] rtc_cmos 00:04: RTC can wake from S4
  132. [ 0.490503] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
  133. [ 0.491287] rtc_cmos 00:04: alarms up to one year, y3k, 242 bytes nvram
  134. [ 0.492426] device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com
  135. [ 0.494028] hidraw: raw HID events driver (C) Jiri Kosina
  136. [ 0.495865] usbcore: registered new interface driver usbhid
  137. [ 0.496662] usbhid: USB HID core driver
  138. [ 0.498465] ACPI: PCI Interrupt Link [ALKC] BIOS reported IRQ 0, using IRQ 22
  139. [ 0.499217] ACPI: PCI Interrupt Link [ALKC] enabled at IRQ 22
  140. [ 0.539042] ehci-pci 0000:00:10.4: GetStatus port:2 status 001803 0 ACK POWER sig=j CSC CONNECT
  141. [ 0.539051] hub 1-0:1.0: port 2: status 0501 change 0001
  142. [ 0.539085] ehci-pci 0000:00:10.4: GetStatus port:7 status 001403 0 ACK POWER sig=k CSC CONNECT
  143. [ 0.539093] hub 1-0:1.0: port 7: status 0501 change 0001
  144. [ 0.552019] uhci_hcd 0000:00:10.0: port 1 portsc 008a,00
  145. [ 0.552042] uhci_hcd 0000:00:10.0: port 2 portsc 009a,00
  146. [ 0.563336] uhci_hcd 0000:00:10.1: port 1 portsc 008a,00
  147. [ 0.563420] uhci_hcd 0000:00:10.1: port 2 portsc 008a,00
  148. [ 0.563476] ata1.00: HPA detected: current 156299375, native 156301488
  149. [ 0.564230] ata1.00: ATA-6: WDC WD800BB-00JHC0, 05.01C05, max UDMA/100
  150. [ 0.564972] ata1.00: 156299375 sectors, multi 16: LBA
  151. [ 0.566594] ata1.01: HPA detected: current 39100223, native 39102336
  152. [ 0.567312] ata1.01: ATA-5: WDC WD200BB-60BNA1, 18.20D18, max UDMA/100
  153. [ 0.568029] ata1.01: 39100223 sectors, multi 16: LBA
  154. [ 0.568741] ata1.00: limited to UDMA/33 due to 40-wire cable
  155. [ 0.569464] ata1.01: limited to UDMA/33 due to 40-wire cable
  156. [ 0.573209] uhci_hcd 0000:00:10.2: port 1 portsc 008a,00
  157. [ 0.573233] uhci_hcd 0000:00:10.2: port 2 portsc 008a,00
  158. [ 0.573368] ata1.00: configured for UDMA/33
  159. [ 0.581122] ata1.01: configured for UDMA/33
  160. [ 0.581944] scsi 0:0:0:0: Direct-Access ATA WDC WD800BB-00JH 05.0 PQ: 0 ANSI: 5
  161. [ 0.583329] uhci_hcd 0000:00:10.3: port 1 portsc 01aa,00
  162. [ 0.583352] uhci_hcd 0000:00:10.3: port 2 portsc 008a,00
  163. [ 0.583723] sd 0:0:0:0: [sda] 156299375 512-byte logical blocks: (80.0 GB/74.5 GiB)
  164. [ 0.585305] sd 0:0:0:0: [sda] Write Protect is off
  165. [ 0.586090] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
  166. [ 0.586116] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
  167. [ 0.588283] sd 0:0:0:0: Attached scsi generic sg0 type 0
  168. [ 0.602365] scsi 0:0:1:0: Direct-Access ATA WDC WD200BB-60BN 18.2 PQ: 0 ANSI: 5
  169. [ 0.604868] sd 0:0:1:0: Attached scsi generic sg1 type 0
  170. [ 0.615157] sd 0:0:1:0: [sdb] 39100223 512-byte logical blocks: (20.0 GB/18.6 GiB)
  171. [ 0.617503] sd 0:0:1:0: [sdb] Write Protect is off
  172. [ 0.618360] sd 0:0:1:0: [sdb] Mode Sense: 00 3a 00 00
  173. [ 0.623776] sd 0:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
  174. [ 0.639026] hub 1-0:1.0: state 7 ports 8 chg 0084 evt 0000
  175. [ 0.639047] hub 1-0:1.0: port 2, status 0501, change 0000, 480 Mb/s
  176. [ 0.646790] sda: sda1 sda2 < sda5 sda6 sda7 >
  177. [ 0.676465] sd 0:0:0:0: [sda] Attached SCSI disk
  178. [ 0.677843] sdb: sdb1 sdb2 sdb3
  179. [ 0.678834] sdb: p3 size 25786368 extends beyond EOD, enabling native capacity
  180. [ 0.680705] ata1: soft resetting link
  181. [ 0.690266] ehci-pci 0000:00:10.4: port 2 reset complete, port enabled
  182. [ 0.690274] ehci-pci 0000:00:10.4: GetStatus port:2 status 001005 0 ACK POWER sig=se0 PE CONNECT
  183. [ 0.741022] usb 1-2: new high-speed USB device number 2 using ehci-pci
  184. [ 0.766258] ata2.00: ATA-5: WDC WD400JB-00ENA0, 05.03E05, max UDMA/100
  185. [ 0.767240] ata2.00: 78165360 sectors, multi 16: LBA
  186. [ 0.768373] ata2.01: ATA-7: HDS728080PLAT20, PF2OA21B, max UDMA/133
  187. [ 0.769328] ata2.01: 160836480 sectors, multi 16: LBA48
  188. [ 0.777103] ata2.00: configured for UDMA/100
  189. [ 0.787374] ata2.01: configured for UDMA/133
  190. [ 0.788378] scsi 1:0:0:0: Direct-Access ATA WDC WD400JB-00EN 05.0 PQ: 0 ANSI: 5
  191. [ 0.790445] sd 1:0:0:0: [sdc] 78165360 512-byte logical blocks: (40.0 GB/37.2 GiB)
  192. [ 0.792275] sd 1:0:0:0: [sdc] Write Protect is off
  193. [ 0.793164] sd 1:0:0:0: [sdc] Mode Sense: 00 3a 00 00
  194. [ 0.793191] sd 1:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
  195. [ 0.795476] sd 1:0:0:0: Attached scsi generic sg2 type 0
  196. [ 0.803286] ehci-pci 0000:00:10.4: port 2 reset complete, port enabled
  197. [ 0.803294] ehci-pci 0000:00:10.4: GetStatus port:2 status 001005 0 ACK POWER sig=se0 PE CONNECT
  198. [ 0.810950] sdc: sdc1
  199. [ 0.811885] scsi 1:0:1:0: Direct-Access ATA HDS728080PLAT20 PF2O PQ: 0 ANSI: 5
  200. [ 0.814268] sd 1:0:0:0: [sdc] Attached SCSI disk
  201. [ 0.815300] sd 1:0:1:0: [sdd] 160836480 512-byte logical blocks: (82.3 GB/76.6 GiB)
  202. [ 0.817161] sd 1:0:1:0: [sdd] Write Protect is off
  203. [ 0.818086] sd 1:0:1:0: [sdd] Mode Sense: 00 3a 00 00
  204. [ 0.818112] sd 1:0:1:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
  205. [ 0.820111] sd 1:0:1:0: Attached scsi generic sg3 type 0
  206. [ 0.831423] sdd: sdd1
  207. [ 0.832999] sd 1:0:1:0: [sdd] Attached SCSI disk
  208. [ 0.842346] ata1.01: n_sectors mismatch 39100223 != 39102336
  209. [ 0.843283] ata1.01: new n_sectors matches native, probably late HPA unlock, n_sectors updated
  210. [ 0.851335] ata1.00: configured for UDMA/33
  211. [ 0.858011] ehci-pci 0000:00:10.4: Waited too long for the async schedule status (0/8000), giving up
  212. [ 0.859225] ata1.01: configured for UDMA/33
  213. [ 0.860160] ata1: EH complete
  214. [ 0.861344] sda: detected capacity change from 0 to 80025280000
  215. [ 0.862296] sd 0:0:1:0: [sdb] 39102336 512-byte logical blocks: (20.0 GB/18.6 GiB)
  216. [ 0.864317] sdb: detected capacity change from 20019314176 to 20020396032
  217. [ 0.880559] usb 1-2: default language 0x0409
  218. [ 0.880932] usb 1-2: udev 2, busnum 1, minor = 1
  219. [ 0.880936] usb 1-2: New USB device found, idVendor=0846, idProduct=9030
  220. [ 0.881828] usb 1-2: New USB device strings: Mfr=16, Product=32, SerialNumber=48
  221. [ 0.883542] usb 1-2: Product: WNA1100
  222. [ 0.884400] usb 1-2: Manufacturer: NETGEAR WNA
  223. [ 0.885230] usb 1-2: SerialNumber: 12345
  224. [ 0.886223] usb 1-2: usb_probe_device
  225. [ 0.886228] usb 1-2: configuration #1 chosen from 1 choice
  226. [ 0.886437] usb 1-2: adding 1-2:1.0 (config #1, interface 0)
  227. [ 0.886588] hub 1-0:1.0: port 7, status 0501, change 0000, 480 Mb/s
  228. [ 0.886600] ehci-pci 0000:00:10.4: port 7 low speed --> companion
  229. [ 0.893061] sdb: sdb1 sdb2 sdb3
  230. [ 0.894272] sda: detected capacity change from 0 to 80025280000
  231. [ 0.895197] sdb: detected capacity change from 0 to 20020396032
  232. [ 0.896352] sd 0:0:1:0: [sdb] Attached SCSI disk
  233. [ 0.937026] ehci-pci 0000:00:10.4: GetStatus port:7 status 003402 0 ACK POWER OWNER sig=k CSC
  234. [ 0.937068] hub 2-0:1.0: state 7 ports 2 chg 0000 evt 0000
  235. [ 0.937073] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000
  236. [ 0.937077] hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0000
  237. [ 0.937081] hub 5-0:1.0: state 7 ports 2 chg 0000 evt 0000
  238. [ 0.937085] hub 1-0:1.0: state 7 ports 8 chg 0000 evt 0080
  239. [ 0.937091] ehci-pci 0000:00:10.4: GetStatus port:7 status 003402 0 ACK POWER OWNER sig=k CSC
  240. [ 0.937105] hub 1-0:1.0: port 7, status 0100, change 0001, 12 Mb/s
  241. [ 0.951340] psmouse serio1: alps: Unknown ALPS touchpad: E7=10 00 64, EC=10 00 64
  242. [ 1.015139] Netfilter messages via NETLINK v0.30.
  243. [ 1.015958] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
  244. [ 1.017117] ctnetlink v0.93: registering with nfnetlink.
  245. [ 1.018033] ip_tables: (C) 2000-2006 Netfilter Core Team
  246. [ 1.018840] TCP: cubic registered
  247. [ 1.019591] Initializing XFRM netlink socket
  248. [ 1.020711] NET: Registered protocol family 10
  249. [ 1.021809] ip6_tables: (C) 2000-2006 Netfilter Core Team
  250. [ 1.022641] sit: IPv6 over IPv4 tunneling driver
  251. [ 1.023774] NET: Registered protocol family 17
  252. [ 1.024595] Key type dns_resolver registered
  253. [ 1.025635] Using IPI No-Shortcut mode
  254. [ 1.026589] registered taskstats version 1
  255. [ 1.027583] Magic number: 14:616:947
  256. [ 1.028353] tty tty4: hash matches
  257. [ 1.029027] console [netcon0] enabled
  258. [ 1.029640] netconsole: network logging started
  259. [ 1.030311] ACPI Exception: AE_NOT_FOUND, Evaluating _PSS (20131115/processor_perflib-349)
  260. [ 1.031701] PM: Hibernation image not present or could not be loaded.
  261. [ 1.031703] ALSA device list:
  262. [ 1.032341] #0: VIA 8237 with ALC655 at 0xe400, irq 22
  263. [ 1.041034] hub 1-0:1.0: debounce: port 7: total 100ms stable 100ms status 0x100
  264. [ 1.041040] hub 5-0:1.0: state 7 ports 2 chg 0000 evt 0002
  265. [ 1.041048] uhci_hcd 0000:00:10.3: port 1 portsc 01a3,00
  266. [ 1.041063] hub 5-0:1.0: port 1, status 0301, change 0001, 1.5 Mb/s
  267. [ 1.145019] hub 5-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x301
  268. [ 1.150016] tsc: Refined TSC clocksource calibration: 1607.390 MHz
  269. [ 1.247021] usb 5-1: new low-speed USB device number 2 using uhci_hcd
  270. [ 1.392507] usb 5-1: skipped 1 descriptor after interface
  271. [ 1.392512] usb 5-1: skipped 1 descriptor after interface
  272. [ 1.397503] usb 5-1: default language 0x0409
  273. [ 1.411504] usb 5-1: udev 2, busnum 5, minor = 513
  274. [ 1.411508] usb 5-1: New USB device found, idVendor=0a81, idProduct=0101
  275. [ 1.412136] usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
  276. [ 1.412727] usb 5-1: Product: USB Keyboard
  277. [ 1.413325] usb 5-1: Manufacturer: CHESEN
  278. [ 1.414088] usb 5-1: usb_probe_device
  279. [ 1.414094] usb 5-1: configuration #1 chosen from 1 choice
  280. [ 1.416522] usb 5-1: adding 5-1:1.0 (config #1, interface 0)
  281. [ 1.416592] usbhid 5-1:1.0: usb_probe_interface
  282. [ 1.416596] usbhid 5-1:1.0: usb_probe_interface - got id
  283. [ 1.432870] input: CHESEN USB Keyboard as /devices/pci0000:00/0000:00:10.3/usb5/5-1/5-1:1.0/input/input5
  284. [ 1.434160] uhci_hcd 0000:00:10.3: reserve dev 2 ep81-INT, period 8, phase 4, 118 us
  285. [ 1.434372] hid-generic 0003:0A81:0101.0001: input,hidraw0: USB HID v1.10 Keyboard [CHESEN USB Keyboard] on usb-0000:00:10.3-1/input0
  286. [ 1.435700] usb 5-1: adding 5-1:1.1 (config #1, interface 1)
  287. [ 1.435795] usbhid 5-1:1.1: usb_probe_interface
  288. [ 1.435800] usbhid 5-1:1.1: usb_probe_interface - got id
  289. [ 1.462623] input: CHESEN USB Keyboard as /devices/pci0000:00/0000:00:10.3/usb5/5-1/5-1:1.1/input/input6
  290. [ 1.463972] uhci_hcd 0000:00:10.3: reserve dev 2 ep82-INT, period 8, phase 4, 118 us
  291. [ 1.464178] hid-generic 0003:0A81:0101.0002: input,hidraw1: USB HID v1.10 Device [CHESEN USB Keyboard] on usb-0000:00:10.3-1/input1
  292. [ 1.503355] input: ImPS/2 Generic Wheel Mouse as /devices/platform/i8042/serio1/input/input4
  293. [ 1.513055] EXT3-fs (sda7): error: couldn't mount because of unsupported optional features (240)
  294. [ 1.514880] EXT2-fs (sda7): error: couldn't mount because of unsupported optional features (244)
  295. [ 1.517351] EXT4-fs (sda7): INFO: recovery required on readonly filesystem
  296. [ 1.518239] EXT4-fs (sda7): write access will be enabled during recovery
  297. [ 1.694234] EXT4-fs (sda7): recovery complete
  298. [ 1.702210] EXT4-fs (sda7): mounted filesystem with ordered data mode. Opts: (null)
  299. [ 1.703998] VFS: Mounted root (ext4 filesystem) readonly on device 8:7.
  300. [ 1.704932] usb usb2: suspend_rh (auto-stop)
  301. [ 1.704951] usb usb3: suspend_rh (auto-stop)
  302. [ 1.704968] usb usb4: suspend_rh (auto-stop)
  303. [ 1.708714] devtmpfs: mounted
  304. [ 1.710245] Freeing unused kernel memory: 556K (c1ab8000 - c1b43000)
  305. [ 1.711337] Write protecting the kernel text: 7880k
  306. [ 1.712345] Write protecting the kernel read-only data: 2520k
  307. [ 1.840415] random: nonblocking pool is initialized
  308. [ 2.150084] Switched to clocksource tsc
  309. [ 2.199690] stty (980) used greatest stack depth: 6216 bytes left
  310. [ 2.729890] ip (1038) used greatest stack depth: 6100 bytes left
  311. [ 2.733331] ip (1039) used greatest stack depth: 5736 bytes left
  312. [ 2.905401] systemd-udevd[1070]: starting version 197
  313. [ 3.663311] cfg80211: Calling CRDA to update world regulatory domain
  314. [ 4.209903] ath9k_htc 1-2:1.0: usb_probe_interface
  315. [ 4.209912] ath9k_htc 1-2:1.0: usb_probe_interface - got id
  316. [ 4.209924] usb 1-2: ath9k_htc: Firmware htc_9271.fw requested
  317. [ 4.211283] usbcore: registered new interface driver ath9k_htc
  318. [ 4.262012] ehci-pci 0000:00:10.4: Waited too long for the async schedule status (0/8000), giving up
  319. [ 4.542301] usb 1-2: ath9k_htc: Transferred FW: htc_9271.fw, size: 51272
  320. [ 4.543787] usb 1-2: ep 83: reserve intr @ 0+1 (0.0+0) [3/0 us] mask 00ff
  321. [ 4.543797] usb 1-2: link qh0-00ff/f629bb40 start 0 [3/0 us]
  322. [ 4.776001] usb 1-2: ep 04: reserve intr @ 0+1 (0.0+0) [3/0 us] mask 00ff
  323. [ 4.776010] usb 1-2: link qh0-00ff/f629ba20 start 0 [3/0 us]
  324. [ 4.780082] ath9k_htc 1-2:1.0: ath9k_htc: HTC initialized with 33 credits
  325. [ 4.815034] usb 1-2: unlink qh0-00ff/f629ba20 start 0 [3/0 us]
  326. [ 4.817006] ehci-pci 0000:00:10.4: reused qh f629ba20 schedule
  327. [ 4.817011] usb 1-2: link qh0-00ff/f629ba20 start 0 [3/0 us]
  328. [ 4.859031] usb 1-2: unlink qh0-00ff/f629ba20 start 0 [3/0 us]
  329. [ 4.861030] ehci-pci 0000:00:10.4: reused qh f629ba20 schedule
  330. [ 4.861042] usb 1-2: link qh0-00ff/f629ba20 start 0 [3/0 us]
  331. [ 4.867033] usb 1-2: unlink qh0-00ff/f629ba20 start 0 [3/0 us]
  332. [ 4.869028] ehci-pci 0000:00:10.4: reused qh f629ba20 schedule
  333. [ 4.869038] usb 1-2: link qh0-00ff/f629ba20 start 0 [3/0 us]
  334. [ 4.875048] usb 1-2: unlink qh0-00ff/f629ba20 start 0 [3/0 us]
  335. [ 4.877037] ehci-pci 0000:00:10.4: reused qh f629ba20 schedule
  336. [ 4.877048] usb 1-2: link qh0-00ff/f629ba20 start 0 [3/0 us]
  337. [ 4.883031] usb 1-2: unlink qh0-00ff/f629ba20 start 0 [3/0 us]
  338. [ 4.886061] ehci-pci 0000:00:10.4: reused qh f629ba20 schedule
  339. [ 4.886072] usb 1-2: link qh0-00ff/f629ba20 start 0 [3/0 us]
  340. [ 4.892021] usb 1-2: unlink qh0-00ff/f629ba20 start 0 [3/0 us]
  341. [ 4.894006] ehci-pci 0000:00:10.4: reused qh f629ba20 schedule
  342. [ 4.894011] usb 1-2: link qh0-00ff/f629ba20 start 0 [3/0 us]
  343. [ 4.900022] usb 1-2: unlink qh0-00ff/f629ba20 start 0 [3/0 us]
  344. [ 4.902157] ehci-pci 0000:00:10.4: reused qh f629ba20 schedule
  345. [ 4.902162] usb 1-2: link qh0-00ff/f629ba20 start 0 [3/0 us]
  346. [ 4.914029] usb 1-2: unlink qh0-00ff/f629ba20 start 0 [3/0 us]
  347. [ 4.916005] ehci-pci 0000:00:10.4: reused qh f629ba20 schedule
  348. [ 4.916010] usb 1-2: link qh0-00ff/f629ba20 start 0 [3/0 us]
  349. [ 4.922020] usb 1-2: unlink qh0-00ff/f629ba20 start 0 [3/0 us]
  350. [ 4.924156] ehci-pci 0000:00:10.4: reused qh f629ba20 schedule
  351. [ 4.924161] usb 1-2: link qh0-00ff/f629ba20 start 0 [3/0 us]
  352. [ 4.930009] usb 1-2: unlink qh0-00ff/f629ba20 start 0 [3/0 us]
  353. [ 4.932140] ehci-pci 0000:00:10.4: reused qh f629ba20 schedule
  354. [ 4.932144] usb 1-2: link qh0-00ff/f629ba20 start 0 [3/0 us]
  355. [ 4.944010] usb 1-2: unlink qh0-00ff/f629ba20 start 0 [3/0 us]
  356. [ 4.946005] ehci-pci 0000:00:10.4: reused qh f629ba20 schedule
  357. [ 4.946009] usb 1-2: link qh0-00ff/f629ba20 start 0 [3/0 us]
  358. [ 5.094918] ath9k_htc 1-2:1.0: ath9k_htc: FW Version: 1.3
  359. [ 5.095853] ath: EEPROM regdomain: 0x60
  360. [ 5.095855] ath: EEPROM indicates we should expect a direct regpair map
  361. [ 5.095861] ath: Country alpha2 being used: 00
  362. [ 5.095863] ath: Regpair used: 0x60
  363. [ 5.105239] ieee80211 phy0: Atheros AR9271 Rev:1
  364. [ 5.106140] usb 1-2: unlink qh0-00ff/f629ba20 start 0 [3/0 us]
  365. [ 5.108006] ehci-pci 0000:00:10.4: reused qh f629ba20 schedule
  366. [ 5.108011] usb 1-2: link qh0-00ff/f629ba20 start 0 [3/0 us]
  367. [ 5.117022] usb 1-2: unlink qh0-00ff/f629ba20 start 0 [3/0 us]
  368. [ 5.910081] Adding 1535996k swap on /dev/sdb2. Priority:1 extents:1 across:1535996k
  369. [ 5.952731] EXT4-fs (sda7): re-mounted. Opts: (null)
  370. [ 6.277485] EXT4-fs (sda7): re-mounted. Opts: (null)
  371. [ 6.425709] EXT4-fs (sdb3): mounted filesystem with ordered data mode. Opts: (null)
  372. [ 7.833519] ip (1448) used greatest stack depth: 5604 bytes left
  373. [ 7.969905] ehci-pci 0000:00:10.4: reused qh f629ba20 schedule
  374. [ 7.969918] usb 1-2: link qh0-00ff/f629ba20 start 0 [3/0 us]
  375. [ 8.266140] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
  376. [ 8.266343] ip (1508) used greatest stack depth: 4984 bytes left
  377. [ 8.289037] usb 1-2: unlink qh0-00ff/f629ba20 start 0 [3/0 us]
  378. [ 9.708035] ehci-pci 0000:00:10.4: reused qh f629ba20 schedule
  379. [ 9.708045] usb 1-2: link qh0-00ff/f629ba20 start 0 [3/0 us]
  380. [ 9.714421] usb 1-2: unlink qh0-00ff/f629ba20 start 0 [3/0 us]
  381. [ 10.706044] ehci-pci 0000:00:10.4: reused qh f629ba20 schedule
  382. [ 10.706054] usb 1-2: link qh0-00ff/f629ba20 start 0 [3/0 us]
  383. [ 10.712345] usb 1-2: unlink qh0-00ff/f629ba20 start 0 [3/0 us]
  384. [ 11.706018] ehci-pci 0000:00:10.4: reused qh f629ba20 schedule
  385. [ 11.706024] usb 1-2: link qh0-00ff/f629ba20 start 0 [3/0 us]
  386. [ 11.712388] usb 1-2: unlink qh0-00ff/f629ba20 start 0 [3/0 us]
  387. [ 12.706030] ehci-pci 0000:00:10.4: reused qh f629ba20 schedule
  388. [ 12.706038] usb 1-2: link qh0-00ff/f629ba20 start 0 [3/0 us]
  389. [ 12.712306] usb 1-2: unlink qh0-00ff/f629ba20 start 0 [3/0 us]
  390. [ 13.706018] ehci-pci 0000:00:10.4: reused qh f629ba20 schedule
  391. [ 13.706024] usb 1-2: link qh0-00ff/f629ba20 start 0 [3/0 us]
  392. [ 13.712350] usb 1-2: unlink qh0-00ff/f629ba20 start 0 [3/0 us]
  393. [ 14.706018] ehci-pci 0000:00:10.4: reused qh f629ba20 schedule
  394. [ 14.706025] usb 1-2: link qh0-00ff/f629ba20 start 0 [3/0 us]
  395. [ 14.712396] usb 1-2: unlink qh0-00ff/f629ba20 start 0 [3/0 us]
  396. [ 15.706017] ehci-pci 0000:00:10.4: reused qh f629ba20 schedule
  397. [ 15.706022] usb 1-2: link qh0-00ff/f629ba20 start 0 [3/0 us]
  398. [ 15.712316] usb 1-2: unlink qh0-00ff/f629ba20 start 0 [3/0 us]
  399. [ 16.706016] ehci-pci 0000:00:10.4: reused qh f629ba20 schedule
  400. [ 16.706021] usb 1-2: link qh0-00ff/f629ba20 start 0 [3/0 us]
  401. [ 16.712362] usb 1-2: unlink qh0-00ff/f629ba20 start 0 [3/0 us]
  402. [ 17.706027] ehci-pci 0000:00:10.4: reused qh f629ba20 schedule
  403. [ 17.706035] usb 1-2: link qh0-00ff/f629ba20 start 0 [3/0 us]
  404. [ 17.712408] usb 1-2: unlink qh0-00ff/f629ba20 start 0 [3/0 us]
  405. [ 18.706037] ehci-pci 0000:00:10.4: reused qh f629ba20 schedule
  406. [ 18.706047] usb 1-2: link qh0-00ff/f629ba20 start 0 [3/0 us]
  407. [ 18.712332] usb 1-2: unlink qh0-00ff/f629ba20 start 0 [3/0 us]
  408. [ 19.706018] ehci-pci 0000:00:10.4: reused qh f629ba20 schedule
  409. [ 19.706024] usb 1-2: link qh0-00ff/f629ba20 start 0 [3/0 us]
  410. [ 19.712373] usb 1-2: unlink qh0-00ff/f629ba20 start 0 [3/0 us]
  411. [ 20.706016] ehci-pci 0000:00:10.4: reused qh f629ba20 schedule
  412. [ 20.706022] usb 1-2: link qh0-00ff/f629ba20 start 0 [3/0 us]
  413. [ 20.712294] usb 1-2: unlink qh0-00ff/f629ba20 start 0 [3/0 us]
  414. [ 21.706014] ehci-pci 0000:00:10.4: reused qh f629ba20 schedule
  415. [ 21.706019] usb 1-2: link qh0-00ff/f629ba20 start 0 [3/0 us]
  416. [ 21.712338] usb 1-2: unlink qh0-00ff/f629ba20 start 0 [3/0 us]
  417. [ 22.706037] ehci-pci 0000:00:10.4: reused qh f629ba20 schedule
  418. [ 22.706047] usb 1-2: link qh0-00ff/f629ba20 start 0 [3/0 us]
  419. [ 22.712397] usb 1-2: unlink qh0-00ff/f629ba20 start 0 [3/0 us]
  420. [ 23.706029] ehci-pci 0000:00:10.4: reused qh f629ba20 schedule
  421. [ 23.706036] usb 1-2: link qh0-00ff/f629ba20 start 0 [3/0 us]
  422. [ 23.712308] usb 1-2: unlink qh0-00ff/f629ba20 start 0 [3/0 us]
  423. [ 24.706033] ehci-pci 0000:00:10.4: reused qh f629ba20 schedule
  424. [ 24.706042] usb 1-2: link qh0-00ff/f629ba20 start 0 [3/0 us]
  425. [ 24.712355] usb 1-2: unlink qh0-00ff/f629ba20 start 0 [3/0 us]
  426. [ 25.706033] ehci-pci 0000:00:10.4: reused qh f629ba20 schedule
  427. [ 25.706042] usb 1-2: link qh0-00ff/f629ba20 start 0 [3/0 us]
  428. [ 25.712399] usb 1-2: unlink qh0-00ff/f629ba20 start 0 [3/0 us]
  429. [ 26.706031] ehci-pci 0000:00:10.4: reused qh f629ba20 schedule
  430. [ 26.706040] usb 1-2: link qh0-00ff/f629ba20 start 0 [3/0 us]
  431. [ 26.712321] usb 1-2: unlink qh0-00ff/f629ba20 start 0 [3/0 us]
  432. [ 27.706018] ehci-pci 0000:00:10.4: reused qh f629ba20 schedule
  433. [ 27.706024] usb 1-2: link qh0-00ff/f629ba20 start 0 [3/0 us]
  434. [ 27.712009] usb 1-2: unlink qh0-00ff/f629ba20 start 0 [3/0 us]
  435. [ 28.706033] ehci-pci 0000:00:10.4: reused qh f629ba20 schedule
  436. [ 28.706042] usb 1-2: link qh0-00ff/f629ba20 start 0 [3/0 us]
  437. [ 28.712413] usb 1-2: unlink qh0-00ff/f629ba20 start 0 [3/0 us]
  438. [ 29.706029] ehci-pci 0000:00:10.4: reused qh f629ba20 schedule
  439. [ 29.706038] usb 1-2: link qh0-00ff/f629ba20 start 0 [3/0 us]
  440. [ 29.712331] usb 1-2: unlink qh0-00ff/f629ba20 start 0 [3/0 us]
  441. [ 30.706029] ehci-pci 0000:00:10.4: reused qh f629ba20 schedule
  442. [ 30.706037] usb 1-2: link qh0-00ff/f629ba20 start 0 [3/0 us]
  443. [ 30.712378] usb 1-2: unlink qh0-00ff/f629ba20 start 0 [3/0 us]
  444. [ 31.706035] ehci-pci 0000:00:10.4: reused qh f629ba20 schedule
  445. [ 31.706045] usb 1-2: link qh0-00ff/f629ba20 start 0 [3/0 us]
  446. [ 31.712423] usb 1-2: unlink qh0-00ff/f629ba20 start 0 [3/0 us]
  447. [ 32.706031] ehci-pci 0000:00:10.4: reused qh f629ba20 schedule
  448. [ 32.706038] usb 1-2: link qh0-00ff/f629ba20 start 0 [3/0 us]
  449. [ 32.712344] usb 1-2: unlink qh0-00ff/f629ba20 start 0 [3/0 us]
  450. [ 33.706030] ehci-pci 0000:00:10.4: reused qh f629ba20 schedule
  451. [ 33.706038] usb 1-2: link qh0-00ff/f629ba20 start 0 [3/0 us]
  452. [ 33.712394] usb 1-2: unlink qh0-00ff/f629ba20 start 0 [3/0 us]
  453. [ 34.706035] ehci-pci 0000:00:10.4: reused qh f629ba20 schedule
  454. [ 34.706043] usb 1-2: link qh0-00ff/f629ba20 start 0 [3/0 us]
  455. [ 34.712310] usb 1-2: unlink qh0-00ff/f629ba20 start 0 [3/0 us]
  456. [ 35.706033] ehci-pci 0000:00:10.4: reused qh f629ba20 schedule
  457. [ 35.706041] usb 1-2: link qh0-00ff/f629ba20 start 0 [3/0 us]
  458. [ 35.712355] usb 1-2: unlink qh0-00ff/f629ba20 start 0 [3/0 us]
  459. [ 36.706034] ehci-pci 0000:00:10.4: reused qh f629ba20 schedule
  460. [ 36.706044] usb 1-2: link qh0-00ff/f629ba20 start 0 [3/0 us]
  461. [ 36.712403] usb 1-2: unlink qh0-00ff/f629ba20 start 0 [3/0 us]
  462. [ 37.706023] ehci-pci 0000:00:10.4: reused qh f629ba20 schedule
  463. [ 37.706028] usb 1-2: link qh0-00ff/f629ba20 start 0 [3/0 us]
  464. [ 37.712321] usb 1-2: unlink qh0-00ff/f629ba20 start 0 [3/0 us]
  465. [ 38.706021] ehci-pci 0000:00:10.4: reused qh f629ba20 schedule
  466. [ 38.706026] usb 1-2: link qh0-00ff/f629ba20 start 0 [3/0 us]
  467. [ 38.712367] usb 1-2: unlink qh0-00ff/f629ba20 start 0 [3/0 us]
  468. [ 39.706030] ehci-pci 0000:00:10.4: reused qh f629ba20 schedule
  469. [ 39.706038] usb 1-2: link qh0-00ff/f629ba20 start 0 [3/0 us]
  470. [ 39.712411] usb 1-2: unlink qh0-00ff/f629ba20 start 0 [3/0 us]
  471. [ 40.706021] ehci-pci 0000:00:10.4: reused qh f629ba20 schedule
  472. [ 40.706026] usb 1-2: link qh0-00ff/f629ba20 start 0 [3/0 us]
  473. [ 40.712331] usb 1-2: unlink qh0-00ff/f629ba20 start 0 [3/0 us]
  474. [ 41.706037] ehci-pci 0000:00:10.4: reused qh f629ba20 schedule
  475. [ 41.706048] usb 1-2: link qh0-00ff/f629ba20 start 0 [3/0 us]
  476. [ 41.712389] usb 1-2: unlink qh0-00ff/f629ba20 start 0 [3/0 us]
  477. [ 42.706032] ehci-pci 0000:00:10.4: reused qh f629ba20 schedule
  478. [ 42.706039] usb 1-2: link qh0-00ff/f629ba20 start 0 [3/0 us]
  479. [ 42.712425] usb 1-2: unlink qh0-00ff/f629ba20 start 0 [3/0 us]
  480. [ 43.706034] ehci-pci 0000:00:10.4: reused qh f629ba20 schedule
  481. [ 43.706043] usb 1-2: link qh0-00ff/f629ba20 start 0 [3/0 us]
  482. [ 43.712345] usb 1-2: unlink qh0-00ff/f629ba20 start 0 [3/0 us]
  483. [ 44.706019] ehci-pci 0000:00:10.4: reused qh f629ba20 schedule
  484. [ 44.706024] usb 1-2: link qh0-00ff/f629ba20 start 0 [3/0 us]
  485. [ 44.712394] usb 1-2: unlink qh0-00ff/f629ba20 start 0 [3/0 us]
  486. [ 45.706029] ehci-pci 0000:00:10.4: reused qh f629ba20 schedule
  487. [ 45.706035] usb 1-2: link qh0-00ff/f629ba20 start 0 [3/0 us]
  488. [ 45.712310] usb 1-2: unlink qh0-00ff/f629ba20 start 0 [3/0 us]
  489. [ 46.706019] ehci-pci 0000:00:10.4: reused qh f629ba20 schedule
  490. [ 46.706025] usb 1-2: link qh0-00ff/f629ba20 start 0 [3/0 us]
  491. [ 46.712355] usb 1-2: unlink qh0-00ff/f629ba20 start 0 [3/0 us]
  492. [ 47.706017] ehci-pci 0000:00:10.4: reused qh f629ba20 schedule
  493. [ 47.706022] usb 1-2: link qh0-00ff/f629ba20 start 0 [3/0 us]
  494. [ 47.712400] usb 1-2: unlink qh0-00ff/f629ba20 start 0 [3/0 us]
  495. [ 48.706016] ehci-pci 0000:00:10.4: reused qh f629ba20 schedule
  496. [ 48.706021] usb 1-2: link qh0-00ff/f629ba20 start 0 [3/0 us]
  497. [ 48.712321] usb 1-2: unlink qh0-00ff/f629ba20 start 0 [3/0 us]
  498. root [ ~ ]#
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement
Public Pastes
Advertisement
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!