2019-01-12 23:07:00  ★ Bryar Beasley grasps onto the arm of the hydraulic jack and gets it under the front left side of the vehic

2019-01-12 23:07:14  ★ le before pumping the handle in order to raise the jack a bit.      ((Bryar Beasley))

2019-01-12 23:07:42  ★ Bryar Beasley lines up the saddle with the vehicle jack point, pumping again to raise the front left

2019-01-12 23:07:46  ★ side up in the air.      ((Bryar Beasley))

2019-01-12 23:08:02  ★ Bryar Beasley reaches out for a tire iron and fits the end with the socket on one of the lug nuts from

2019-01-12 23:08:17  ★ the front left tire, starting to turn the tool counter clockwise in order to loosen it      ((Bryar Beasley))

2019-01-12 23:08:37  ★ Bryar Beasley would then loosen the rest of the lugs nuts, collecting them and stashing them in his

2019-01-12 23:08:42  ★ jacket's pocket for later use.      ((Bryar Beasley))

2019-01-12 23:09:05  ★ Bryar Beasley kneels down and grasps onto the edging of the wheel, pulling it out with a jiggling motion.

2019-01-12 23:09:17  ★ Bryar Beasley puts it down on the ground and puts the tire iron back in the toolbox.

2019-01-12 23:09:35  ★ Bryar Beasley takes out a ratcheting wrench and a 13mm socket, fitting it on the wrench and using it

2019-01-12 23:10:10  ★ to undo the two bolts securing the brake caliper.      ((Bryar Beasley))

2019-01-12 23:10:34  ★ Bryar Beasley uses an open end wrench from the tool box to loosen the nut from the brake line

2019-01-12 23:10:46  ★ prior to plugging the brake line off of the brake caliper.      ((Bryar Beasley))

2019-01-12 23:11:05  ★ Bryar Beasley removes the caliper as it would be completely loose, he'd put it down on the ground and

2019-01-12 23:11:20  ★ take a grip onto the brake rotor, sliding it right off.      ((Bryar Beasley))

2019-01-12 23:11:39  ★ Bryar Beasley puts the removed rotor down on the ground and pushes himself up as he heads to

2019-01-12 23:11:58  ★ a corner of the garage, lifting up a medium size carton box and moving it near the workspace      ((Bryar Beasley))

2019-01-12 23:12:22  ★ Bryar Beasley tears it open and starts taking out everything that came with the aftermarket brake kit.

2019-01-12 23:12:45  ★ Bryar Beasley reaches out for the new brake rotor and carefully inserts it in place before taking two

2019-01-12 23:13:02  ★ new brake pads and the front left caliper.      ((Bryar Beasley))

2019-01-12 23:13:30  ★ Bryar Beasley places the pads in the appropriate slots inside the caliper and hand fits it on the rotor.

2019-01-12 23:14:18  ★ Bryar Beasley takes the new caliper bolts that came with the kit and hand tightens them to get them going.

2019-01-12 23:14:42  ★ Bryar Beasley reaches out for his ratchet and tightens the two bolts so that the new caliper is in place.

2019-01-12 23:15:03  ★ Bryar Beasley reconnects the brake line with the new caliper and uses his open end wrench to

2019-01-12 23:15:12  ★ tighten the small bolt from the brake line to secure it.      ((Bryar Beasley))

2019-01-12 23:16:01   [English] Bryar Beasley says: Uhh tires too?

2019-01-12 23:16:05   [English] Kwamie Palmer says: Yeah.

2019-01-12 23:16:33   [English] Bryar Beasley says: Alright.

2019-01-12 23:20:45  ★ Bryar Beasley fits a 15mm socket on his wrench and uses it to loosen the lower mounting bolts

2019-01-12 23:20:58  ★ that connect the shock absorbers to the A-arms.      ((Bryar Beasley))

2019-01-12 23:21:17  ★ Bryar Beasley pushes himself up and squeezes the handle of the driver door, pulling it open.

2019-01-12 23:21:32  ★ Bryar Beasley leans forth and pulls the hood release, popping the hood open.

2019-01-12 23:21:54  ★ Bryar Beasley heads to the front of the vehicle and loosens the nuts on the left strut tower.

2019-01-12 23:22:32  ★ Bryar Beasley looks for his visegrips in the tool box and locks the jaws on the shock springs so that

2019-01-12 23:22:38  ★ they stay compressed.      ((Bryar Beasley))

2019-01-12 23:23:01  ★ Bryar Beasley pulls the shock absorbers out through the lower A-arm.

2019-01-12 23:24:15  ★ Bryar Beasley reaches out for the package, opening it and searching for the new suspension parts.

2019-01-12 23:25:02  ★ Bryar Beasley carefully inserts the new coil in place, making sure it snaps there and that is aligned with

2019-01-12 23:25:13  ★ the mounting holes.      ((Bryar Beasley))

2019-01-12 23:25:44  ★ Bryar Beasley uses his ratchet to loosen the mounting bolts that connect the coil to the lower A-arm.

2019-01-12 23:26:09  ★ Bryar Beasley pushes himself up and takes a look in the engine bay, using the ratchet to secure all the

2019-01-12 23:26:15  ★ bolts on the left strut tower.      ((Bryar Beasley))

2019-01-12 23:26:34  ★ Bryar Beasley puts all the tools back in place and collects the removed parts as he tosses them aside.

2019-01-12 23:27:24  ★ Bryar Beasley grabs ahold of the tire iron and a flathead screwdriver before approaching the removed

2019-01-12 23:27:28  ★ front left wheel.      ((Bryar Beasley))

2019-01-12 23:28:04  ★ Bryar Beasley wedges the sharp side of the tire iron between the tire and the rim, bending his knees

2019-01-12 23:28:33  ★ slightly while pushing his end of the tire iron away, trying to pry the tire off of the rim.      ((Bryar Beasley))

2019-01-12 23:29:01  ★ Bryar Beasley inserts the screwdriver between the tire and the rim and steadily eases the rest of

2019-01-12 23:29:19  ★ the tire off in order to seperate it from the rim.      ((Bryar Beasley))

2019-01-12 23:29:54  ★ Bryar Beasley finishes the first side, he'd flip the wheel over and use the tire iron to pry the other

2019-01-12 23:30:03  ★ side of the tire off of the rim.      ((Bryar Beasley))

2019-01-12 23:30:33  ★ Bryar Beasley reaches out for the new rim, placing it on top of the rim and uses a little bit of oil to

2019-01-12 23:30:59  ★ lubricate the bead of the tire.      ((Bryar Beasley))

2019-01-12 23:31:33  ★ Bryar Beasley uses the tire iron to pry the bed onto the rim and applies pressure using his palms.

2019-01-12 23:31:51  ★ Bryar Beasley finally forces one side of the new tire onto the rim, he'd flip it over and use the tire iro

2019-01-12 23:32:09  ★ iron to help him pry the other side of the tire onto the rim.      ((Bryar Beasley))

2019-01-12 23:32:55  ★ Bryar Beasley wipes off his sweaty forehead and grabs ahold of the air compressor hose, fitting it

2019-01-12 23:33:12  ★ on the wheel's valve and turning it on in order to fill the new tire with air.      ((Bryar Beasley))

2019-01-12 23:33:47  ★ Bryar Beasley applies the cover of the tire valve before lifting it up and carefully inserting it back in

2019-01-12 23:33:50  ★ place.      ((Bryar Beasley))

2019-01-12 23:34:12  ★ Bryar Beasley takes the removed lug nuts out of his pocket and hand tightens them before finishing

2019-01-12 23:34:46  ★ the job using the tire iron's socket end.      ((Bryar Beasley))

2019-01-12 23:35:00  ★ Bryar Beasley would tighten all the lug nuts in a criss cross pattern.

2019-01-12 23:35:25  ★ Bryar Beasley grasps onto the jack's handle, twisting it counter clockwise to slowly lower the vehicle

2019-01-12 23:35:29  ★ back on the ground.      ((Bryar Beasley))

2019-01-12 23:36:17  ★ Bryar Beasley drags the jack along as he heads to the right front side of the vehicle.

2019-01-12 23:36:43  ★ Bryar Beasley lines the saddle up with the pinch weld before starting to pump the jack's handle in order

2019-01-12 23:36:50  ★ to raise the right front side up.      ((Bryar Beasley))

2019-01-12 23:37:36  ★ Bryar Beasley uses the socket on the tire iron to loosen all the lug nuts on the right front wheel

2019-01-12 23:37:46  ★ prior to pulling it out of place and placing it aside.      ((Bryar Beasley))

2019-01-12 23:38:32  ★ Bryar Beasley grabs ahold of his ratchet and uses it to loosen the two bolts that secure the brake caliper

2019-01-12 23:38:37  ★ to the knuckle.      ((Bryar Beasley))

2019-01-12 23:38:58  ★ Bryar Beasley collects the removed bolts and uses an open end wrench to loosen the bolt that secures

2019-01-12 23:39:03  ★ the brake line to the caliper.      ((Bryar Beasley))

2019-01-12 23:39:12  ★ Bryar Beasley slides the caliper right off and puts it down

2019-01-12 23:39:58  ★ Bryar Beasley grabs the rotor and pulls it out, placing it down.

2019-01-12 23:40:11  ★ Bryar Beasley reaches out for two new brake pads and the right front caliper.

2019-01-12 23:40:31  ★ Bryar Beasley fits the new brake pads on the new brake caliper properly before using the mounting

2019-01-12 23:40:55  ★ accessory to assemble the caliper.      ((Bryar Beasley))

2019-01-12 23:41:34  ★ Bryar Beasley removes a new brake rotor from the box, inserting it in place before sliding the new

2019-01-12 23:41:50  ★ caliper in place and hand tightening the two bolts that attach it to the knuckle.      ((Bryar Beasley))

2019-01-12 23:42:05  ★ Bryar Beasley reconnects the brake line to the new caliper and tightens the small nut that secures it

2019-01-12 23:42:07  ★ in place.      ((Bryar Beasley))

2019-01-12 23:42:46  ★ Bryar Beasley reaches out for his tire iron, wedging it between the bead of the tire and the rim as he

2019-01-12 23:43:02  ★ pushes away as hard as he can, trying to pry that side of the tire off of the rim.      ((Bryar Beasley))

2019-01-12 23:43:33  ★ Bryar Beasley uses a flathead screwdriver to ease the rest of the tire off.

2019-01-12 23:44:10  ★ Bryar Beasley flips the wheel over and uses the sharp side of the tire iron to pry off the bead of the tir

2019-01-12 23:44:18  ★ tire, seperating it from the rim.      ((Bryar Beasley))

2019-01-12 23:44:45  ★ Bryar Beasley reaches out for a clean rag and the lube bottle, pouring some oil on the rag to soak it and

2019-01-12 23:45:03  ★ wiping the bead of the tire all the way around.      ((Bryar Beasley))

2019-01-12 23:45:43  ★ Bryar Beasley lines up the new tire with the rim and using his tire iron, he'd pry it in place while

2019-01-12 23:46:06  ★ lowering his knees against the tire and applying pressure using his body weight.      ((Bryar Beasley))

2019-01-12 23:46:12  ★ The tire would snap in place.      ((Bryar Beasley))

2019-01-12 23:46:53  ★ Bryar Beasley upturns it so that he has access to the other side, he'd use the tire iron to tuck the bead

2019-01-12 23:47:08  ★ of the tire inside the rim so that they are properly mounted.      ((Bryar Beasley))

2019-01-12 23:47:26  ★ Bryar Beasley twists the valve cap off, connecting the hose from the compressor and turning it on

2019-01-12 23:47:43  ★ as he inflates the tire.      ((Bryar Beasley))

2019-01-12 23:48:03  ★ Bryar Beasley turns the air compressor off and puts the cap back on before lifting the wheel and putting i

2019-01-12 23:48:06  ★ it in place.      ((Bryar Beasley))

2019-01-12 23:48:44  ★ Bryar Beasley safely secures the wheel by tightening all the lug nuts in a criss cross patern.

2019-01-12 23:48:51  ★ Bryar Beasley pushes himself up.

2019-01-12 23:49:24   [English] Bryar Beasley says: I'll come back for the rest of it tomorrow.