*  Executando tarefa: platformio run --target upload

Processing esp32-s3-devkitm-1 (platform: espressif32; board: esp32-s3-devkitm-1; framework: arduino)
-----------------------------------------------------------------------------------------------------------------
Verbose mode can be enabled via `-v, --verbose` option
CONFIGURATION: https://docs.platformio.org/page/boards/espressif32/esp32-s3-devkitm-1.html
PLATFORM: Espressif 32 (6.9.0) > Espressif ESP32-S3-DevKitM-1
HARDWARE: ESP32S3 240MHz, 320KB RAM, 8MB Flash
DEBUG: Current (esp-builtin) On-board (esp-builtin) External (cmsis-dap, esp-bridge, esp-prog, iot-bus-jtag, jlink, minimodule, olimex-arm-usb-ocd, olimex-arm-usb-ocd-h, olimex-arm-usb-tiny-h, olimex-jtag-tiny, tumpa)
PACKAGES:
 - framework-arduinoespressif32 @ 3.20017.241212+sha.dcc1105b
 - tool-esptoolpy @ 1.40501.0 (4.5.1)
 - tool-mkfatfs @ 2.0.1
 - tool-mklittlefs @ 1.203.210628 (2.3)
 - tool-mkspiffs @ 2.230.0 (2.30)
 - toolchain-riscv32-esp @ 8.4.0+2021r2-patch5
 - toolchain-xtensa-esp32s3 @ 8.4.0+2021r2-patch5
LDF: Library Dependency Finder -> https://bit.ly/configure-pio-ldf
LDF Modes: Finder ~ chain, Compatibility ~ soft
Found 33 compatible libraries
Scanning dependencies...
No dependencies
Building in release mode
Compiling .pio/build/esp32-s3-devkitm-1/src/main.cpp.o
Building .pio/build/esp32-s3-devkitm-1/bootloader.bin
Generating partitions .pio/build/esp32-s3-devkitm-1/partitions.bin
esptool.py v4.5.1
Creating esp32s3 image...
Merged 1 ELF section
Successfully created esp32s3 image.
Compiling .pio/build/esp32-s3-devkitm-1/FrameworkArduino/Esp.cpp.o
Compiling .pio/build/esp32-s3-devkitm-1/FrameworkArduino/FirmwareMSC.cpp.o
Compiling .pio/build/esp32-s3-devkitm-1/FrameworkArduino/FunctionalInterrupt.cpp.o
Compiling .pio/build/esp32-s3-devkitm-1/FrameworkArduino/HWCDC.cpp.o
Compiling .pio/build/esp32-s3-devkitm-1/FrameworkArduino/HardwareSerial.cpp.o
Compiling .pio/build/esp32-s3-devkitm-1/FrameworkArduino/IPAddress.cpp.o
Compiling .pio/build/esp32-s3-devkitm-1/FrameworkArduino/IPv6Address.cpp.o
Compiling .pio/build/esp32-s3-devkitm-1/FrameworkArduino/MD5Builder.cpp.o
Compiling .pio/build/esp32-s3-devkitm-1/FrameworkArduino/Print.cpp.o
Compiling .pio/build/esp32-s3-devkitm-1/FrameworkArduino/Stream.cpp.o
Compiling .pio/build/esp32-s3-devkitm-1/FrameworkArduino/StreamString.cpp.o
Compiling .pio/build/esp32-s3-devkitm-1/FrameworkArduino/Tone.cpp.o
Compiling .pio/build/esp32-s3-devkitm-1/FrameworkArduino/USB.cpp.o
Compiling .pio/build/esp32-s3-devkitm-1/FrameworkArduino/USBCDC.cpp.o
Compiling .pio/build/esp32-s3-devkitm-1/FrameworkArduino/USBMSC.cpp.o
Compiling .pio/build/esp32-s3-devkitm-1/FrameworkArduino/WMath.cpp.o
Compiling .pio/build/esp32-s3-devkitm-1/FrameworkArduino/WString.cpp.o
Compiling .pio/build/esp32-s3-devkitm-1/FrameworkArduino/base64.cpp.o
Compiling .pio/build/esp32-s3-devkitm-1/FrameworkArduino/cbuf.cpp.o
Compiling .pio/build/esp32-s3-devkitm-1/FrameworkArduino/esp32-hal-adc.c.o
Compiling .pio/build/esp32-s3-devkitm-1/FrameworkArduino/esp32-hal-bt.c.o
Compiling .pio/build/esp32-s3-devkitm-1/FrameworkArduino/esp32-hal-cpu.c.o
Compiling .pio/build/esp32-s3-devkitm-1/FrameworkArduino/esp32-hal-dac.c.o
Compiling .pio/build/esp32-s3-devkitm-1/FrameworkArduino/esp32-hal-gpio.c.o
Compiling .pio/build/esp32-s3-devkitm-1/FrameworkArduino/esp32-hal-i2c-slave.c.o
Compiling .pio/build/esp32-s3-devkitm-1/FrameworkArduino/esp32-hal-i2c.c.o
Compiling .pio/build/esp32-s3-devkitm-1/FrameworkArduino/esp32-hal-ledc.c.o
Compiling .pio/build/esp32-s3-devkitm-1/FrameworkArduino/esp32-hal-matrix.c.o
Compiling .pio/build/esp32-s3-devkitm-1/FrameworkArduino/esp32-hal-misc.c.o
Compiling .pio/build/esp32-s3-devkitm-1/FrameworkArduino/esp32-hal-psram.c.o
Compiling .pio/build/esp32-s3-devkitm-1/FrameworkArduino/esp32-hal-rgb-led.c.o
Compiling .pio/build/esp32-s3-devkitm-1/FrameworkArduino/esp32-hal-rmt.c.o
Compiling .pio/build/esp32-s3-devkitm-1/FrameworkArduino/esp32-hal-sigmadelta.c.o
Compiling .pio/build/esp32-s3-devkitm-1/FrameworkArduino/esp32-hal-spi.c.o
Compiling .pio/build/esp32-s3-devkitm-1/FrameworkArduino/esp32-hal-time.c.o
Compiling .pio/build/esp32-s3-devkitm-1/FrameworkArduino/esp32-hal-timer.c.o
Compiling .pio/build/esp32-s3-devkitm-1/FrameworkArduino/esp32-hal-tinyusb.c.o
Compiling .pio/build/esp32-s3-devkitm-1/FrameworkArduino/esp32-hal-touch.c.o
Compiling .pio/build/esp32-s3-devkitm-1/FrameworkArduino/esp32-hal-uart.c.o
Compiling .pio/build/esp32-s3-devkitm-1/FrameworkArduino/firmware_msc_fat.c.o
Compiling .pio/build/esp32-s3-devkitm-1/FrameworkArduino/libb64/cdecode.c.o
Compiling .pio/build/esp32-s3-devkitm-1/FrameworkArduino/libb64/cencode.c.o
Compiling .pio/build/esp32-s3-devkitm-1/FrameworkArduino/main.cpp.o
Compiling .pio/build/esp32-s3-devkitm-1/FrameworkArduino/stdlib_noniso.c.o
Compiling .pio/build/esp32-s3-devkitm-1/FrameworkArduino/wiring_pulse.c.o
Compiling .pio/build/esp32-s3-devkitm-1/FrameworkArduino/wiring_shift.c.o
Archiving .pio/build/esp32-s3-devkitm-1/libFrameworkArduino.a
Indexing .pio/build/esp32-s3-devkitm-1/libFrameworkArduino.a
Linking .pio/build/esp32-s3-devkitm-1/firmware.elf
Retrieving maximum program size .pio/build/esp32-s3-devkitm-1/firmware.elf
Checking size .pio/build/esp32-s3-devkitm-1/firmware.elf
Advanced Memory Usage is available via "PlatformIO Home > Project Inspect"
RAM:   [=         ]   5.6% (used 18432 bytes from 327680 bytes)
Flash: [=         ]   7.9% (used 263453 bytes from 3342336 bytes)
Building .pio/build/esp32-s3-devkitm-1/firmware.bin
esptool.py v4.5.1
Creating esp32s3 image...
Merged 2 ELF sections
Successfully created esp32s3 image.
Configuring upload protocol...
AVAILABLE: cmsis-dap, esp-bridge, esp-builtin, esp-prog, espota, esptool, iot-bus-jtag, jlink, minimodule, olimex-arm-usb-ocd, olimex-arm-usb-ocd-h, olimex-arm-usb-tiny-h, olimex-jtag-tiny, tumpa
CURRENT: upload_protocol = esptool
Looking for upload port...
Auto-detected: /dev/cu.usbmodem101
Uploading .pio/build/esp32-s3-devkitm-1/firmware.bin
esptool.py v4.5.1
Serial port /dev/cu.usbmodem101
Connecting...
Chip is ESP32-S3 (revision v0.2)
Features: WiFi, BLE
Crystal is 40MHz
MAC: XXXXXXX
Uploading stub...
Running stub...
Stub running...
Changing baud rate to 460800
Changed.
Configuring flash size...
Flash will be erased from 0x00000000 to 0x00003fff...
Flash will be erased from 0x00008000 to 0x00008fff...
Flash will be erased from 0x0000e000 to 0x0000ffff...
Flash will be erased from 0x00010000 to 0x00050fff...
Compressed 15104 bytes to 10430...
Writing at 0x00000000... (100 %)
Wrote 15104 bytes (10430 compressed) at 0x00000000 in 0.3 seconds (effective 419.6 kbit/s)...
Hash of data verified.
Compressed 3072 bytes to 146...
Writing at 0x00008000... (100 %)
Wrote 3072 bytes (146 compressed) at 0x00008000 in 0.1 seconds (effective 356.4 kbit/s)...
Hash of data verified.
Compressed 8192 bytes to 47...
Writing at 0x0000e000... (100 %)
Wrote 8192 bytes (47 compressed) at 0x0000e000 in 0.1 seconds (effective 546.2 kbit/s)...
Hash of data verified.
Compressed 263824 bytes to 147193...
Writing at 0x00010000... (11 %)
Writing at 0x0001c8ac... (22 %)
Writing at 0x000248e9... (33 %)
Writing at 0x00029e5b... (44 %)
Writing at 0x0002f36a... (55 %)
Writing at 0x000349be... (66 %)
Writing at 0x0003d35e... (77 %)
Writing at 0x00045364... (88 %)
Writing at 0x0004a99f... (100 %)
Wrote 263824 bytes (147193 compressed) at 0x00010000 in 2.6 seconds (effective 815.2 kbit/s)...
Hash of data verified.

Leaving...
Hard resetting via RTS pin...
========================================== [SUCCESS] Took 9.47 seconds ==========================================
 *  O terminal será reutilizado por tarefas, pressione qualquer tecla para fechá-lo.