dh_makeshlibs
dh_installdeb
cat debian/linuxcnc-uspace/DEBIAN/shlibs debian/shlibs.pre > debian/shlibs.local
dh_shlibdeps -l debian/linuxcnc-uspace/usr/lib
dpkg-shlibdeps: warning: symbol _Z22rtapi_timespec_advanceR8timespecRKS_m used by debian/linuxcnc-uspace-xenomai/usr/lib/libuspace-xenomai.so.0 found in none of the libraries
dpkg-shlibdeps: warning: symbol rtapi_print used by debian/linuxcnc-uspace-xenomai/usr/lib/libuspace-xenomai.so.0 found in none of the libraries
dpkg-shlibdeps: warning: symbol _ZN8RtapiApp8get_taskEi used by debian/linuxcnc-uspace-xenomai/usr/lib/libuspace-xenomai.so.0 found in none of the libraries
dpkg-shlibdeps: warning: symbol rtapi_print_msg used by debian/linuxcnc-uspace-xenomai/usr/lib/libuspace-xenomai.so.0 found in none of the libraries
dpkg-shlibdeps: warning: symbol _ZN8RtapiApp25unexpected_realtime_delayEP10rtapi_taski used by debian/linuxcnc-uspace-xenomai/usr/lib/libuspace-xenomai.so.0 found in none of the libraries
dpkg-shlibdeps: warning: symbol _ZN10rtapi_taskC2Ev used by debian/linuxcnc-uspace-xenomai/usr/lib/libuspace-xenomai.so.0 found in none of the libraries
dpkg-shlibdeps: warning: symbol task_array used by debian/linuxcnc-uspace-xenomai/usr/lib/libuspace-xenomai.so.0 found in none of the libraries
dpkg-shlibdeps: warning: package could avoid a useless dependency if debian/linuxcnc-uspace-xenomai/usr/lib/libuspace-xenomai.so.0 was not linked against libxenomai.so.0 (it uses none of the library's symbols)
dpkg-shlibdeps: error: no dependency information found for /var/lib/VBoxGuestAdditions/lib/libGL.so.1 (used by debian/linuxcnc-uspace/usr/lib/python2.7/dist-packages/_togl.x86_64-linux-gnu.so)
Hint: check if the library actually comes from a package.
dh_shlibdeps: dpkg-shlibdeps -Tdebian/linuxcnc-uspace.substvars -l/debian/linuxcnc-uspace/usr/lib debian/linuxcnc-uspace/usr/bin/linuxcncsvr debian/linuxcnc-uspace/usr/bin/vfdb_vfd debian/linuxcnc-uspace/usr/bin/hy_gt_vfd debian/linuxcnc-uspace/usr/bin/rs274 debian/linuxcnc-uspace/usr/bin/halscope debian/linuxcnc-uspace/usr/bin/wj200_vfd debian/linuxcnc-uspace/usr/bin/xhc-hb04 debian/linuxcnc-uspace/usr/bin/panelui debian/linuxcnc-uspace/usr/bin/mb2hal debian/linuxcnc-uspace/usr/bin/inivar debian/linuxcnc-uspace/usr/bin/linuxcncrsh debian/linuxcnc-uspace/usr/bin/halcmd debian/linuxcnc-uspace/usr/bin/schedrmt debian/linuxcnc-uspace/usr/bin/halui debian/linuxcnc-uspace/usr/bin/milltask debian/linuxcnc-uspace/usr/bin/halstreamer debian/linuxcnc-uspace/usr/bin/shuttle debian/linuxcnc-uspace/usr/bin/gs2_vfd debian/linuxcnc-uspace/usr/bin/thermistor debian/linuxcnc-uspace/usr/bin/rtapi_app debian/linuxcnc-uspace/usr/bin/halsampler debian/linuxcnc-uspace/usr/bin/halmeter debian/linuxcnc-uspace/usr/bin/halrmt debian/linuxcnc-uspace/usr/bin/linuxcnc_module_helper debian/linuxcnc-uspace/usr/bin/classicladder debian/linuxcnc-uspace/usr/bin/linuxcnclcd debian/linuxcnc-uspace/usr/bin/iov2 debian/linuxcnc-uspace/usr/bin/vfs11_vfd debian/linuxcnc-uspace/usr/bin/io debian/linuxcnc-uspace/usr/bin/genserkins debian/linuxcnc-uspace/usr/bin/motion-logger debian/linuxcnc-uspace/usr/bin/hy_vfd debian/linuxcnc-uspace/usr/lib/tcltk/linuxcnc/linuxcnc.so debian/linuxcnc-uspace/usr/lib/tcltk/linuxcnc/hal.so debian/linuxcnc-uspace/usr/lib/librs274.so.0 debian/linuxcnc-uspace/usr/lib/libnml.so.0 debian/linuxcnc-uspace/usr/lib/linuxcnc/modules/carousel.so debian/linuxcnc-uspace/usr/lib/linuxcnc/modules/conv_s32_u32.so debian/linuxcnc-uspace/usr/lib/linuxcnc/modules/hal_gm.so debian/linuxcnc-uspace/usr/lib/linuxcnc/modules/siggen.so debian/linuxcnc-uspace/usr/lib/linuxcnc/modules/joyhandle.so debian/linuxcnc-uspace/usr/lib/linuxcnc/modules/sum2.so debian/linuxcnc-uspace/usr/lib/linuxcnc/modules/sphereprobe.so debian/linuxcnc-uspace/usr/lib/linuxcnc/modules/pumakins.so debian/linuxcnc-uspace/usr/lib/linuxcnc/modules/hal_bb_gpio.so debian/linuxcnc-uspace/usr/lib/linuxcnc/modules/hm2_eth.so debian/linuxcnc-uspace/usr/lib/linuxcnc/modules/debounce.so debian/linuxcnc-uspace/usr/lib/linuxcnc/modules/sim_matrix_kb.so debian/linuxcnc-uspace/usr/lib/linuxcnc/modules/genserkins.so debian/linuxcnc-uspace/usr/lib/linuxcnc/modules/hal_lib.so debian/linuxcnc-uspace/usr/lib/linuxcnc/modules/tripodkins.so debian/linuxcnc-uspace/usr/lib/linuxcnc/modules/sim_encoder.so debian/linuxcnc-uspace/usr/lib/linuxcnc/modules/hm2_spi.so debian/linuxcnc-uspace/usr/lib/linuxcnc/modules/abs.so debian/linuxcnc-uspace/usr/lib/linuxcnc/modules/mux_generic.so debian/linuxcnc-uspace/usr/lib/linuxcnc/modules/threads.so debian/linuxcnc-uspace/usr/lib/linuxcnc/modules/bin2gray.so debian/linuxcnc-uspace/usr/lib/linuxcnc/modules/abs_s32.so debian/linuxcnc-uspace/usr/lib/linuxcnc/modules/hypot.so debian/linuxcnc-uspace/usr/lib/linuxcnc/modules/knob2float.so debian/linuxcnc-uspace/usr/lib/linuxcnc/modules/scope_rt.so debian/linuxcnc-uspace/usr/lib/linuxcnc/modules/spindle_monitor.so debian/linuxcnc-uspace/usr/lib/linuxcnc/modules/conv_bit_float.so debian/linuxcnc-uspace/usr/lib/linuxcnc/modules/hm2_rpspi.so debian/linuxcnc-uspace/usr/lib/linuxcnc/modules/bldc.so debian/linuxcnc-uspace/usr/lib/linuxcnc/modules/sim_axis_hardware.so debian/linuxcnc-uspace/usr/lib/linuxcnc/modules/maxkins.so debian/linuxcnc-uspace/usr/lib/linuxcnc/modules/gearchange.so debian/linuxcnc-uspace/usr/lib/linuxcnc/modules/blend.so debian/linuxcnc-uspace/usr/lib/linuxcnc/modules/timedelay.so debian/linuxcnc-uspace/usr/lib/linuxcnc/modules/message.so debian/linuxcnc-uspace/usr/lib/linuxcnc/modules/bldc_hall3.so debian/linuxcnc-uspace/usr/lib/linuxcnc/modules/scale.so debian/linuxcnc-uspace/usr/lib/linuxcnc/modules/serport.so debian/linuxcnc-uspace/usr/lib/linuxcnc/modules/scarakins.so debian/linuxcnc-uspace/usr/lib/linuxcnc/modules/sim_spindle.so debian/linuxcnc-uspace/usr/lib/linuxcnc/modules/simple_tp.so debian/linuxcnc-uspace/usr/lib/linuxcnc/modules/wcomp.so debian/linuxcnc-uspace/usr/lib/linuxcnc/modules/or2.so debian/linuxcnc-uspace/usr/lib/linuxcnc/modules/mux16.so debian/linuxcnc-uspace/usr/lib/linuxcnc/modules/hal_ppmc.so debian/linuxcnc-uspace/usr/lib/linuxcnc/modules/conv_bit_u32.so debian/linuxcnc-uspace/usr/lib/linuxcnc/modules/logic.so debian/linuxcnc-uspace/usr/lib/linuxcnc/modules/multiswitch.so debian/linuxcnc-uspace/usr/lib/linuxcnc/modules/bitslice.so debian/linuxcnc-uspace/usr/lib/linuxcnc/modules/axistest.so debian/linuxcnc-uspace/usr/lib/linuxcnc/modules/deadzone.so debian/linuxcnc-uspace/usr/lib/linuxcnc/modules/updown.so debian/linuxcnc-uspace/usr/lib/linuxcnc/modules/flipflop.so debian/linuxcnc-uspace/usr/lib/linuxcnc/modules/maj3.so debian/linuxcnc-uspace/usr/lib/linuxcnc/modules/lcd.so debian/linuxcnc-uspace/usr/lib/linuxcnc/modules/hm2_pci.so debian/linuxcnc-uspace/usr/lib/linuxcnc/modules/rosekins.so debian/linuxcnc-uspace/usr/lib/linuxcnc/modules/oneshot.so debian/linuxcnc-uspace/usr/lib/linuxcnc/modules/biquad.so debian/linuxcnc-uspace/usr/lib/linuxcnc/modules/streamer.so debian/linuxcnc-uspace/usr/lib/linuxcnc/modules/thc.so debian/linuxcnc-uspace/usr/lib/linuxcnc/modules/conv_float_u32.so debian/linuxcnc-uspace/usr/lib/linuxcnc/modules/mux8.so debian/linuxcnc-uspace/usr/lib/linuxcnc/modules/limit3.so debian/linuxcnc-uspace/usr/lib/linuxcnc/modules/corexykins.so debian/linuxcnc-uspace/usr/lib/linuxcnc/modules/gray2bin.so debian/linuxcnc-uspace/usr/lib/linuxcnc/modules/ilowpass.so debian/linuxcnc-uspace/usr/lib/linuxcnc/modules/hostmot2.so debian/linuxcnc-uspace/usr/lib/linuxcnc/modules/motmod.so debian/linuxcnc-uspace/usr/lib/linuxcnc/modules/latencybins.so debian/linuxcnc-uspace/usr/lib/linuxcnc/modules/conv_float_s32.so debian/linuxcnc-uspace/usr/lib/linuxcnc/modules/rotarydeltakins.so debian/linuxcnc-uspace/usr/lib/linuxcnc/modules/differential.so debian/linuxcnc-uspace/usr/lib/linuxcnc/modules/tristate_bit.so debian/linuxcnc-uspace/usr/lib/linuxcnc/modules/lut5.so debian/linuxcnc-uspace/usr/lib/linuxcnc/modules/timedelta.so debian/linuxcnc-uspace/usr/lib/linuxcnc/modules/encoder.so debian/linuxcnc-uspace/usr/lib/linuxcnc/modules/mesa_7i65.so debian/linuxcnc-uspace/usr/lib/linuxcnc/modules/estop_latch.so debian/linuxcnc-uspace/usr/lib/linuxcnc/modules/mux2.so debian/linuxcnc-uspace/usr/lib/linuxcnc/modules/modmath.so debian/linuxcnc-uspace/usr/lib/linuxcnc/modules/at_pid.so debian/linuxcnc-uspace/usr/lib/linuxcnc/modules/time.so debian/linuxcnc-uspace/usr/lib/linuxcnc/modules/mux4.so debian/linuxcnc-uspace/usr/lib/linuxcnc/modules/classicladder_rt.so debian/linuxcnc-uspace/usr/lib/linuxcnc/modules/5axiskins.so debian/linuxcnc-uspace/usr/lib/linuxcnc/modules/constant.so debian/linuxcnc-uspace/usr/lib/linuxcnc/modules/conv_s32_bit.so debian/linuxcnc-uspace/usr/lib/linuxcnc/modules/near.so debian/linuxcnc-uspace/usr/lib/linuxcnc/modules/feedcomp.so debian/linuxcnc-uspace/usr/lib/linuxcnc/modules/supply.so debian/linuxcnc-uspace/usr/lib/linuxcnc/modules/demux.so debian/linuxcnc-uspace/usr/lib/linuxcnc/modules/clarkeinv.so debian/linuxcnc-uspace/usr/lib/linuxcnc/modules/matrix_kb.so debian/linuxcnc-uspace/usr/lib/linuxcnc/modules/invert.so debian/linuxcnc-uspace/usr/lib/linuxcnc/modules/moveoff.so debian/linuxcnc-uspace/usr/lib/linuxcnc/modules/orient.so debian/linuxcnc-uspace/usr/lib/linuxcnc/modules/sim_parport.so debian/linuxcnc-uspace/usr/lib/linuxcnc/modules/hm2_7i43.so debian/linuxcnc-uspace/usr/lib/linuxcnc/modules/weighted_sum.so debian/linuxcnc-uspace/usr/lib/linuxcnc/modules/toggle2nist.so debian/linuxcnc-uspace/usr/lib/linuxcnc/modules/offset.so debian/linuxcnc-uspace/usr/lib/linuxcnc/modules/threadtest.so debian/linuxcnc-uspace/usr/lib/linuxcnc/modules/bitwise.so debian/linuxcnc-uspace/usr/lib/linuxcnc/modules/setsserial.so debian/linuxcnc-uspace/usr/lib/linuxcnc/modules/sample_hold.so debian/linuxcnc-uspace/usr/lib/linuxcnc/modules/toggle.so debian/linuxcnc-uspace/usr/lib/linuxcnc/modules/max31855.so debian/linuxcnc-uspace/usr/lib/linuxcnc/modules/conv_s32_float.so debian/linuxcnc-uspace/usr/lib/linuxcnc/modules/conv_u32_bit.so debian/linuxcnc-uspace/usr/lib/linuxcnc/modules/histobins.so debian/linuxcnc-uspace/usr/lib/linuxcnc/modules/integ.so debian/linuxcnc-uspace/usr/lib/linuxcnc/modules/counter.so debian/linuxcnc-uspace/usr/lib/linuxcnc/modules/gantry.so debian/linuxcnc-uspace/usr/lib/linuxcnc/modules/xor2.so debian/linuxcnc-uspace/usr/lib/linuxcnc/modules/lineardeltakins.so debian/linuxcnc-uspace/usr/lib/linuxcnc/modules/select8.so debian/linuxcnc-uspace/usr/lib/linuxcnc/modules/minmax.so debian/linuxcnc-uspace/usr/lib/linuxcnc/modules/limit1.so debian/linuxcnc-uspace/usr/lib/linuxcnc/modules/steptest.so debian/linuxcnc-uspace/usr/lib/linuxcnc/modules/xyzac-trt-kins.so debian/linuxcnc-uspace/usr/lib/linuxcnc/modules/comp.so debian/linuxcnc-uspace/usr/lib/linuxcnc/modules/sim_home_switch.so debian/linuxcnc-uspace/usr/lib/linuxcnc/modules/thcud.so debian/linuxcnc-uspace/usr/lib/linuxcnc/modules/clarke3.so debian/linuxcnc-uspace/usr/lib/linuxcnc/modules/charge_pump.so debian/linuxcnc-uspace/usr/lib/linuxcnc/modules/conv_u32_float.so debian/linuxcnc-uspace/usr/lib/linuxcnc/modules/edge.so debian/linuxcnc-uspace/usr/lib/linuxcnc/modules/stepgen.so debian/linuxcnc-uspace/usr/lib/linuxcnc/modules/lincurve.so debian/linuxcnc-uspace/usr/lib/linuxcnc/modules/limit2.so debian/linuxcnc-uspace/usr/lib/linuxcnc/modules/tristate_float.so debian/linuxcnc-uspace/usr/lib/linuxcnc/modules/watchdog.so debian/linuxcnc-uspace/usr/lib/linuxcnc/modules/hm2_7i90.so debian/linuxcnc-uspace/usr/lib/linuxcnc/modules/encoder_ratio.so debian/linuxcnc-uspace/usr/lib/linuxcnc/modules/multiclick.so debian/linuxcnc-uspace/usr/lib/linuxcnc/modules/mesa_pktgyro_test.so debian/linuxcnc-uspace/usr/lib/linuxcnc/modules/hal_parport.so debian/linuxcnc-uspace/usr/lib/linuxcnc/modules/match8.so debian/linuxcnc-uspace/usr/lib/linuxcnc/modules/xyzbc-trt-kins.so debian/linuxcnc-uspace/usr/lib/linuxcnc/modules/clarke2.so debian/linuxcnc-uspace/usr/lib/linuxcnc/modules/hm2_test.so debian/linuxcnc-uspace/usr/lib/linuxcnc/modules/eoffset_per_angle.so debian/linuxcnc-uspace/usr/lib/linuxcnc/modules/genhexkins.so debian/linuxcnc-uspace/usr/lib/linuxcnc/modules/and2.so debian/linuxcnc-uspace/usr/lib/linuxcnc/modules/mult2.so debian/linuxcnc-uspace/usr/lib/linuxcnc/modules/pid.so debian/linuxcnc-uspace/usr/lib/linuxcnc/modules/conv_u32_s32.so debian/linuxcnc-uspace/usr/lib/linuxcnc/modules/ddt.so debian/linuxcnc-uspace/usr/lib/linuxcnc/modules/conv_bit_s32.so debian/linuxcnc-uspace/usr/lib/linuxcnc/modules/trivkins.so debian/linuxcnc-uspace/usr/lib/linuxcnc/modules/xhc_hb04_util.so debian/linuxcnc-uspace/usr/lib/linuxcnc/modules/lowpass.so debian/linuxcnc-uspace/usr/lib/linuxcnc/modules/pwmgen.so debian/linuxcnc-uspace/usr/lib/linuxcnc/modules/not.so debian/linuxcnc-uspace/usr/lib/linuxcnc/modules/rotatekins.so debian/linuxcnc-uspace/usr/lib/linuxcnc/modules/scorbot-kins.so debian/linuxcnc-uspace/usr/lib/linuxcnc/modules/sampler.so debian/linuxcnc-uspace/usr/lib/linuxcnc/modules/boss_plc.so debian/linuxcnc-uspace/usr/lib/libcanterp.so.0 debian/linuxcnc-uspace/usr/lib/libpyplugin.so.0 debian/linuxcnc-uspace/usr/lib/python2.7/dist-packages/_togl.x86_64-linux-gnu.so debian/linuxcnc-uspace/usr/lib/python2.7/dist-packages/minigl.x86_64-linux-gnu.so debian/linuxcnc-uspace/usr/lib/python2.7/dist-packages/gcode.x86_64-linux-gnu.so debian/linuxcnc-uspace/usr/lib/python2.7/dist-packages/linuxcnc.x86_64-linux-gnu.so debian/linuxcnc-uspace/usr/lib/python2.7/dist-packages/rotarydeltakins.x86_64-linux-gnu.so debian/linuxcnc-uspace/usr/lib/python2.7/dist-packages/_hal.x86_64-linux-gnu.so debian/linuxcnc-uspace/usr/lib/python2.7/dist-packages/lineardeltakins.x86_64-linux-gnu.so debian/linuxcnc-uspace/usr/lib/libposemath.so.0 debian/linuxcnc-uspace/usr/lib/liblinuxcncini.so.0 debian/linuxcnc-uspace/usr/lib/liblinuxcnchal.so.0 returned exit code 25
dh_shlibdeps: Aborting due to earlier error
debian/rules:102: recipe for target 'binary-arch' failed
make: *** [binary-arch] Error 2
dpkg-buildpackage: error: fakeroot debian/rules binary subprocess returned exit status 2
debuild: fatal error at line 1152:
dpkg-buildpackage -rfakeroot -us -uc -ui failed